Advertisement
Advertisement
VIPNX
WIPER FOR HOUSING
DESCRIPTION
Wiper kit which can be directly installed on the housing body. Brush and body in steel.
Integrates the support for the wash injector coming from the pump. Available for housings in the NXM series.
MECHANICAL
Wiperblade and enclosure constructed from AISI 316L stainless steel
Dimensions (ØxL): 100x169mm (3.9x6.7in) (not comprehensive of blade)
Unit weight: 1.7kg (3.7lb)
ELECTRICAL
Connector 3+1 pins
Supply voltage/Current consumption:
• 24Vac, 290mA max, 50/60Hz
• 230Vac, 30mA max, 50/60Hz
CERTIFICATIONS
CE listed
IP protection degree (EN60529):
• IP66
• IP67
EAC certification
Lloyd's Register Marine Type Approval (certification only valid for the codes: VIPNX1C,
VIPNX2C)
TECHNICAL DRAWINGS
The indicated measurements are expressed in millimetres.
PART NUMBER
VIPNX1C
VIPNX2C
PACKAGE
Model Number
VIPNX1C
230Vac stainless steel wiper for NXM housing
24Vac stainless steel wiper for NXM housing
Weight Dimensions (WxHxL)
1.9kg (4.2lb) 14.5x15x27cm (6x6x11in)
Master carton
15
R170
VIPNX
100 65 104
191
WWW.VIDEOTEC.COM - DATA SHEETS
VIPNX_en-GB_2021-10-20_15-51-45
Specifications subject to change without notice. © VIDEOTEC S.p.A. All rights reserved. The mentioned names of products or companies are trademarks or registered trademarks.

Public link updated
The public link to your chat has been updated.
Advertisement