ADN 2923 FALCON.
Mullion “anes Installation Instructions
Reinforcement o
for Screws C/L Opening
ell
1. INSTALL BOTTOM FITTING USING ANCHORS PROVIDED AS SHOWN IN
FIG. A. AND FIG. B.
|
|
= | Е 2. DRILL AND TAP FRAME FOR TOP FITTING AS SHOWN IN FIG. A.
Door Frame С a 5 | $ $ po 3. VERIFY MULLION LENGTH AS FOLLOWS:
NS | (| U-/ --+- К -- А) PLACE TOP MULLION FITTING INTO ТОР OF MULLION.
_ <a! 5/8 | B) LOCATE MULLION INTO DOOR OPENING AS SHOWN IN FIG. C.
Top Fitting - . > | | C) IF MULLION DOES NOT FIT INTO OPENING THEN
%- a mil Device C/L Device 1) MEASURE OPENING SIZE "X" AS SHOWN IN FIG. C.
| : Drill & Tap For Correct Backset 2) CALCULATE REQUIRED LENGTH = "X"- 3/4"
29/32" 2910-24 see Device Template 3) CUT MULLION TO THE REQUIRED LENGTH AND REINSTALL
4 Places MULLION INTO OPENING.
FIG. B 4. INSTALL TOP MULLION FITTING WITH (4) MOUNTING SCREWS INTO
DOOR FRAME.
5. INSTALL CLAMP WITH + 10-24 SCREWS, SEE FIG. A.
Face of Stop INSTALL 3/8"-16 SET SCREWS SECURELY INTO TOP AND BOTTOM
24 X 1/4" or Mullion
AS .
#
©
1
9
Bottom Fitting
FITTING.
" PPHMS | Él 7. PROCEED WITH DEVICE INSTALLATION
3/8"-16X1/2" | ry |
Set Screw 7
ЧИ
Г
Г
Ly
a
2923 Mullion ——» — XV 1/4 ' o.
jt "x
Po
ry
a
| ro Door
|
|
|
|
1/4"-20 Anchors
й
#
.
`
- 2 , &
- 17
|
ME
A a
- x e
N
_ |
Finished Floor
3/8"-16X1/2" Set Screw am
Customer Service UU O Allegion 2014
“OA и FIG. С | А
1-877-671-7011 www.allegion.com/us ALLEGION D-4025 Rev. 01/14-b
FIG. A q
">
