LL 4423 FALCON.
-4022
Mullion Installation Instructions
REINFORCEMENT C/L OPENING
FOR SCREWS
DOOR HEADER
1. Install bottom fitting using anchors provided.
- 2. Prepare frame for top fitting. Reinforcement recommend- |
ed as shown.
TOP FITTING
#10-24 TAP 3 Install top fitting
FACE OF STOP
OR MULLION 4. Cut mullion to %s’’ clearance between mullion and top
C/L DEVICE fitting flange (A '%.’’ less than total dimension between
top fitting mounting surface and finished floor).
FOR CORRECT BACKSET 5. Slide top fitting clamp onto mullion, slide mullion on top
SEE DEVICE TEMPLATE fitting and then set onto bottom fitting.
A-SEE STEP 4 C/L DEVICE 6. Install clamp.
%-16 #4396
ET SCREW
SET S STRIKES — #10-24 THD ЕН.М.5. 7. Tighten set screws securely.
DÍ 7 SUPPLIED
CLAMP WITH
MULLION
4423 MULLION —
Y
à
N
\
%-20 THD F.H.M.S. , 8. Install stabilizer blocks (see Fig. B).
7 à MULLION
« 1 — . . . » -
#-20 ТАР As Sf 9. Install strikes. Proceed with device installation.
Ng NOTE: Ref. СЛ. device is 40’ to finished floor.
| | > ГК <=
¡ BOTTOM FITTING 4%" г
|
| ' ir TT Sl
' = | STABILIZER BLOCKS RECOMMENDED
Tee
‚| |
- ul | |
| || > |
40" || | LC a > 14 €
TO FINISHED Ä A | NOTE: А cut mullion to provide %s’’ gap
FLOOR | | AL LL 77 | RHR between top of mullion and top fitting (see
ANDAS == ep ©
| RL I / %-20 ANCHORS DOOR
> %-16 SET SCREW m
Customer Service we printed in USA,
ALLEGION D-4022 Rev. 01/14-b
1-877-671-7011 www.allegion.com/us
">
