Falcon RM150 Installation instructions
Falcon Falcon RM150A is a removable mullion system that allows for easy installation and removal of doors. It is designed for use in a variety of applications, including commercial buildings, schools, and hospitals. The RM150A can be used with both single and double doors, and it is available in a variety of finishes to match any décor.
Some of the key features of the RM150A include:
- Easy installation and removal: The RM150A can be installed and removed quickly and easily, without the need for any special tools. This makes it ideal for use in applications where doors need to be frequently removed, such as for cleaning or maintenance.
Advertisement
Advertisement
4270107582
1.
Prepare frame header for filler or adapter plate.
Install filler or adapter plate and top bracket.
For RM150 see Figures 1 and 2. (Filler, filler mounting screws, and bracket mounting screws by others.)
For RM150A see Figures 3 and 4.
2.
Prepare floor and threshold for bottom bracket.
Install bottom bracket (Figures 5 and 6, other side).
3.
Cut mullion to length from top (Figures 7 and
8, other side).
4.
Slide mullion over top fitting and swing into position on bottom fitting (Figure 9, other side).
5.
Slide mullion clamp over top fitting and secure with three screws (Figure 10, other side).
6.
Install security clips on door (Figure 11, other side).
RM150 & RM150A
Removable Mullions
Filler (by others)
Top bracket
Drill and tap header and filler for 10-32 screws, 5 places
Door
Top bracket location
Door
doors
Door
2-1/2"
1-1/2"
3/4"
View looking up
5/8"
1-1/4"
1-7/8"
2-15/16"
Figure 1.
Header and filler preparation for top bracket (RM150).
Filler (by others) flush with stop, centered on center line of doors
doors
10-32 x 1/2" FPHMS
(by others)
Figure 2.
Filler and top bracket installation (RM150).
Customer Service
1-877-671-7011 www.allegion.com/us
Installation Instructions
Door
Adapter plate
Prepare header for #10 x 1"
FPHSMS, 4 places
1-1/2"
Door
2-1/4" doors
1-1/8"
Adapter plate location
View looking up
Door
11/32"
1-27/32"
Figure 3.
Header preparation for adapter plate
(RM150A).
Adapter plate
#10 x 1" FPHMS
4 places
Install top bracket to adapter plate with three
10-32 x 1/2" FPHMS
Figure 4.
Adapter plate and top bracket installation (RM150A).
© Allegion 2014
Printed in U.S.A.
4270107582 Rev. 10/14-e
2
Door
Prepare floor for
#14 x 1" screw anchors, 3 places
1-5/8"
Cut out threshold for bottom bracket doors
Door
2-1/2"
Door
View looking down
5/8"
1-7/8"
2-15/16"
Figure 5.
Floor and threshold preparation for bottom bracket.
#10 x 1" FPHSMS
3 places
Top bracket
7/8"
Cut mullion
1/16" less than this dimension
66"
Cut top end
CAUTION: There is a steel tube inside of the mullion
4-3/4" approx
of pushbar
Bottom bracket
1/4"
Figure 7.
Required mullion length.
11"
Figure 8.
Cut mullion to length.
1 Slide mullion over top bracket
2 Swing mullion into position on bottom bracket
Figure 9.
Install mullion.
#14 x 1" screw anchors in floor, 3 places
Figure 6.
Bottom bracket installation.
10-32 x 3/8" PPHMS
3 places
Header not shown for clarity
Door stabilizer clips
Clamp
Figure 10.
Slide mullion clamp up over top bracket and secure with screws.
1/32" min.
1/32" min.
Frame stabilizer clips on mullion (mullion not shown for clarity)
10-32 x 1/2" FPHMS
4 places
Figure 11.
Position door stabilizer clips as shown, drill and tap door 10-32, 4 places, and install door stabilizer clips.

Public link updated
The public link to your chat has been updated.
Advertisement