Bush CMC4BTMP3 CD MICRO SYSTEM WITH BLUETOOTH Instruction Manual

Add to my manuals
12 Pages

advertisement

Bush CMC4BTMP3 CD MICRO SYSTEM WITH BLUETOOTH Instruction Manual | Manualzz

BUSH - CD Micro System With Bluetooth

Installation & User Instructions – Please keep for future reference 360/8911 (D)

Important

– Please read these instructions fully before installing or using

These instructions contain important information which will help you get the best from your appliance and ensure safe and correct installation, use and maintenance.

If you need help or have damaged or missing parts, call the Customer Helpline: 0870 600 3030

Table of contents

Accessories included . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Overview of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Overview of controls (cont) . . . . . . . . . . . . . . . . . . . . . . .4

Remote control battery installation . . . . . . . . . . . . . . .4

Connecting the loud speakers . . . . . . . . . . . . . . . . . . . .4

Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

General operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Volume controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Mute function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Tone controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

DSP effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Loudness function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Switching modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Loading a USB device . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

CD/MP3 operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Skipping Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Fast Searching Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Repeat Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Numeric buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Programme playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Random CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .6

FM (Radio) operation . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Scanning for stations . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Storing a station preset . . . . . . . . . . . . . . . . . . . . . . . . . .7

Recalling a station preset . . . . . . . . . . . . . . . . . . . . . . . .7

Bluetooth operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Connecting an external audio device . . . . . . . . . . . 7

Connecting an external audio device (cont) . . . . . 8

Connecting to an external amplifier . . . . . . . . . . . . 8

Earphone connection . . . . . . . . . . . . . . . . . . . . . . . . . . 8

UK Mains plug information . . . . . . . . . . . . . . . . . . . . . 8

Technical specifications . . . . . . . . . . . . . . . . . . . . . . . 8

Care & maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Disc handling information . . . . . . . . . . . . . . . . . . . . . 9

Disposal information . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Product Code

CMC4BTMP3

Page 1

Safety information

Important – Please read these instructions fully before using

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE

PARTS INSIDE, REFER ANY SERVICING TO QUALIFIED SERVICE PERSONNEL.

• Please read this owner’s guide

• Please take the time to follow the instructions in this owner’s guide carefully . It will help you set up and operate your system properly and enjoy all of its advanced features .

• Please save this owner’s guide for future reference .

• The product label is located on the back of the product .

• Heed all warnings - on the product and in the owner’s guide .

• Do not use this apparatus near water or moisture .

• Do not use this product near a bathtub, washbowl, kitchen sink, and laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture is present .

• Only use attachments/accessories specified by the manufacturer .

• Unplug this apparatus during lightning storms or when unused for long periods of time - to prevent damage to this product .

• Refer all servicing to qualified service personnel

• Servicing is required when the apparatus has been damaged in any way: such as liquid has been spilled or objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped -

• Do not attempt to service this product yourself .

• Opening or removing covers may expose you to dangerous voltages or other hazards .

• To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles .

• Use suitable power sources - Plug the product into a suitable power source, as described in the operating instructions or as marked on the product .

• The mains plug is used as the disconnect device, the disconnect device shall remain readily accessible .

This symbol means that this unit is double insulated . An earth connection is not required .

CAUTION : CLASS 1 LASER PRODUCT

This product utilizes a Class 1 laser . This laser DVD

Player is equipped with safety switches to avoid exposure when the door is open and the safety interlocks are defeated . Invisible laser radiation is present when the Player’s lid is open and the system’s interlock has failed or been defeated . It is very important that you avoid direct exposure to the laser beam at all times . Please do not attempt to defeat or bypass the safety switches .

LASER SAFETY

This unit employs a laser, only qualified service personnel should attempt repair .

• Any electrical work that is required to install this appliance MUST be carried out by a qualified electrician .

• Before making any electrical connections, ensure the following:

• Do not bend, stretch or pull the supply cable in order to avoid electric shock .

• The supply voltage should be the same as that indicated in the technical specifications and the appliance rating plate .

• When installed, the power socket must be within easy reach .

• If the socket outlets in your home are not suitable for the plug supplied with this unit check with a qualified electrician for replacement .

• The use of multiple connectors or extension cables are not recommended .

• The appliance must be connected to a 100-240 volt

50/60Hz AC supply by means of a three pin socket .

• The main plug is used as the disconnect device, the disconnect device shall remain readily operable .

• In order to disconnect the apparatus from the mains completely, switch off the outlet and remove the mains plug completely .

CAUTION

RISK OF ELECTRIC SHOCK!

DO NOT OPEN!

This product complies with European low voltage (2006/95/EC) and electromagnetic compatibility (2004/108/EC) directives .

Page 2

1

2

3

4

5

6

1

1

2

4

5

4

5

6

Functions & controls

11

Please familiarize yourself with the parts and accessories listed below

Accessories included

• 1 x CMC4BTMP3

• 1 x Instruction manual

• 1 x Remote control

(with batteries)

Overview of controls

12

• 2 x Speakers

10

10

9

7

110-240V~ 50/60Hz

20W

13

14

15

16

17

11

11

12

12

110-240V~ 50/60Hz

20W

110-240V~ 50/60Hz

20W

13

14

15

15

1: DISPLAY

2: STOP button

3: STANDBY button

4: PREVIOUS /CH- button

5: SKIP / CH+ button

6: USB input socket

7: EARPHONE output socket

8: INPUT SOURCE button

9: VOLUME control

10: PLAY/PAUSE button

11: SPEAKER output sockets

12: PIG TAIL antenna

13: AUDIO output sockets

14: LINE input sockets

15: MAINS cable

16: CD compartment lid

17: CD lid release button

18: MUTE button

16

16

17

17

25

18

23

24

19

20

21

22

REV FWD

PAIR

TONE

30

27

26

38

29

28

37

36

35

34

33

32

31

Page 3

10

9

8

7

Installation

Overview of controls (cont)

19: SEARCH button

20: REPEAT button

21: SKIP / CH+ button

22: REV button

23: PREVIOUS /CH- button

24: NUMERIC buttons

25: VOLUME +/- buttons

26: TONE button

27: MEMORY button

28: LOUDNESS button

29: DSP button

30: PLAY/PAUSE button

31: FWD button

32: PROGRAM button

33: STOP button

34: RANDOM button

35: INPUT SOURCE button

36: STANDBY button

37: CD/USB mode button

38: PAIR button

Remote control battery installation

1: Remove the battery cover (as shown) .

2: Insert 2 x AAA batteries (supplied) , taking note that the polarities match up .

3: Replace the battery cover, in the same manner as you removed it .

1 2 3

Connecting the loud speakers

110-240V~ 50/60Hz

20W

1: Unwrap the speaker wires .

2: Place a speaker on either side of the main unit, preferably at the same height, and with at least

150 mm between each speaker and the main unit .

3: Connect the speaker wire plugs to the terminals on the rear of the unit (11) as shown in the diagram above . The speaker plugs will only fit in the terminals one way so make sure the clips are facing downwards when connecting .

Getting started

1: Connect the mains plug to a UK wall outlet .

2: Extend the pig tail antenna as far as it can go .

NOTE: The quality of the FM reception will be influenced by the positioning of the pigtail aerial .

3: Press the STANDBY button (3 , 36) to wake from standby mode .

Notes on battery usage

• Do not insert battery into the remote control in the wrong direction .

• Do not charge, heat, open or short-circuit the battery .

Do not throw battery into a fire .

• If the remote control does not function correctly or if the operating range becomes reduced, replace all batteries with new ones .

• Improper replacement of batteries may result in explosive hazard . It must be replaced only by batteries with the same or equivalent type .

Page 4

Standby mode

1: Press the STANDBY button on the unit (3) or press the

STANDBY button (36) on the remote to put the system into standby mode . To resume normal operation press either button again .

NOTE: This unit is designed to enter STANDBY mode automatically after 20 MINUTES

(approximately) of inactivity.

Press the STANDBY button to wake the unit.

User instructions

General operation

Volume controls

1: Rotate the VOLUME control (9) clockwise or press the

VOLUME+ button (25) on the remote to increase the volume level .

2: Rotate the VOLUME control (9) anti-clockwise or press the VOLUME button (25) on the remote to decrease the volume level .

Switching modes

To switch between the available modes : CD, FM, LINE

INPUT & BLUETOOTH.

1: Press the SOURCE button (8 , 35) to cycle through the options .

2: To select USB input mode . You must first select CD by following (step 1) . Then press the CD/USB button (37) on the remote control to switch to the USB mode .

Mute function

1: Press the MUTE button (18) at any time to silence the output .

2: Press again to resume audio output .

Loading a USB device

To connect a USB flash drive follow the below steps.

1: Connect the USB device to the USB input socket (6) on the front of the unit as shown .

Tone controls

Adjust the Bass & Treble tone controls if required.

1: Press the TONE button (26) repeatedly on the remote control to cycle the tone options .

2: The first press is Volume . Use the VOL+ /- buttons or the VOLUME control (9) to adjust .

3: The second press is Treble . Use the VOL+ /- buttons or the VOLUME control (9) to adjust .

4: Press the TONE button again a third time to edit the

Bass . Use the VOL+ /- buttons or the VOLUME control

(9) to adjust .

DSP effects

1: Pressing the DSP button (29) on the remote repeatedly cycles through a set of EQ presets to alter the sound field . Choose from: Jazz, Rock, Pop, Classic

& Off .

2: Follow step 2 from ‘Switching modes’ above to select the USB input mode .

3: The device can be disconnected by removing carefully from the USB input socket .

Loudness function

This function adds a rounder bass sound at low levels .

1: Press the LOUD button (28) on the remote to enable .

2: Press again to disable the effect .

NOTES:

• Do not disconnect the device during operation

• Depending on the capacity of the dvice, reading

may take more than 1 minute.

• This unit does not supprt the NTFS file system.

Format all USB devices in FAT or FAT32.

• The maximum number of files supported is 999.

Page 5

User instructions

CD/MP3 operation

1: Make sure you are in CD or USB mode, if not read the

2: Press the lid release button (17) on top of the unit .

3: When the door is closed “ LOAD” will appear on the

3:

4:

5:

Playback

‘Switching modes’ section above .

When the lid opens insert a disc (label side facing upwards) and close the lid until you hear a click . Or follow ‘Loading a USB device’ for USB MP3 playback .

display as the unit detects compatible audio tracks .

Playback will begin automatically from Track

To stop playback press the

To pause playback press the

(10 , 30) once more .

STOP button

PLAY/PAUSE

(2 ,

01 .

33) .

button

during playback . To resume playback press

Programme playback

Should you wish to create a playlist from a CD or MP3 tracks. Follow the below steps to program the playlist.

1: Ensure any loaded disc is in STOP mode . Press the

PROG button (32) to enter the programme setup function .

2: You will see P01 appear on the display to indicate program track 01 .

3: Use the / buttons (4/5 , 23/21) to skip between the track numbers . or use the numeric buttons to enter the track number directly .

4: When you have selected the track you wish to program press the PROG button (32) again .

5: The program track no will change to P02 , and you can continue programming following steps 3 4 each time .

6: When you have programmed your playlist press the

PLAY/PAUSE button (10 , 30) to begin playback .

7: To cancel the programmed playlist press the STOP button (2 , 33) .

Skipping Tracks

1: To skip to the next track on a disc press (5 , 21) .

2: To skip to the previous track press (4 , 23) .

Fast Searching Tracks

1: To fast forward a track during playback press FWD

(31) on the remote control . Each press of the button increases the search speed EG: 2 x, 4 x & 6 x the next press will resume normal playback . To fast rewind a track during playback press the REV (22) button .

Random CD Operation

1: Press the RANDOM button (34) on the remote control .

You will see ‘RAN’ appear on the display and the CD contents will be played once in a random order .

2: To cancel the random operation press the RANDOM button again . You will see ‘RAN’ disapear from the display .

Repeat Operation

1: During playback pressing the REPEAT button (20) will flag the current track to repeat indefinitely . You will see flash on the display .

2: Pressing the REPEAT button again will repeat all tracks on the disc . You will see the flashing and remain solid .

icon stop

3: To cancel the repeat function press the REPEAT button for a third time . You will see the icon disappear from the display .

Numeric buttons

While listening to a CD or MP3 tracks a specific track number can be played by pressing the relative digit on the number buttons. EG track 6 would be 6. To play track 12 you would press the 10+ button then 2.

FM (Radio) operation

Scanning for stations

1: You can skip up or down the frequency range manually by pressing the REV (22) or FWD (31) buttons on the remote or (4) or (5) buttons on the unit to increase or decrease the frequency in 0 .

05

MHz increments .

2: Alternatively you can press the SEARCH button (19) .

This will scan the entire frequency range and store any strong stations located into the preset memory list .

NOTE: Pressing the SEARCH button again erases any previously stored stations on the preset list.

Page 6

User instructions

Storing a station preset

1: To store a tuned station to a preset location press the MEMORY button (27) ‘CH01’ will appear on the display to indicate Preset location ‘01’ .

2: Press the / buttons (23/21) on the remote or press and hold (4/5) on the unit to cycle through the preset locations 1 20 .

3: When the preset location required is selected press the MEMORY button (27) again to store the tuned station .

Recalling a station preset

1: To select a preset in radio mode either press the required numeric button (s) or use the / buttons (23/21) on the remote or press and hold (4/5) on the unit to cycle through the preset locations .

Bluetooth operation (cont)

When making a phone call you will need to either disable bluetooth on your mobile device or switch to another source input should you not wish the call to be output from the speakers.

NOTE: the volume output is effected by the volume level on the audio source EG: Phone or laptop, so make sure that is set to about 70-80%

(not too loud to avoid distortion).

Any obstacles between devices may affect the bluetooth connection

When a mobile phone is paired with too many devices, you may need to clear the pairing history to connect.

Bluetooth operation

When using the Bluetooth connection, you can listen to audio wirelessly from a Bluetooth stereo audio device within 10 metres of the CMC4BTMP3.

1: Select BT mode using the instructions from the

‘Switching modes’ section .

2: When the Bluetooth mode is selected a BLUE indicator led will flash 3 times and then a beep will be heard . The unit is now in pairing mode and will pair with any previously connected devices . When in pairing mode a RED indicator led will flash until paired .

3: If you have not connected a device you can now enable ‘discovery’ mode on your device and select the

CMC4BTMP3 Bluetooth connection . If you are asked for a pass code enter ‘0000’ .

Connecting an external audio device

External audio sources such as iPod’s & MP3 players can be connected using a 3.5mm to RCA audio cable

(not supplied).

110-240V~ 50/60Hz

20W

NOTE: If you turn off either device before pairing is complete the process will need to be repeated when powered ON again.

4: Once paired the BLUE led indicator will flash slowly and a beep will be heard .

5: When playback from the device is initiated the RED &

BLUE led indicators will flash simultaneously

6: If using a mobile phone as an audio source, when receiving a call audio playback stops while you receive the call . When you hang up the audio is restored .

7: To disconnect (un-pair) a connected bluetooth device press the PAIR button (38) .

1: Connect the 3 .

5 mm end of the cable to the AUDIO devices headphone /Line output and RED & WHITE

RCA plugs to the LINE IN input (14) on the rear of the unit .

NOTE: Make sure the RED plug connected to the

RED input and the WHITE plug to the WHITE input.

2: Select LINE IN mode using the instructions from the

‘Switching modes’ section .

3: Press play on the external audio device .

4: Adjust the volume to your desired level .

Page 7

Main Unit

1: STANDBY indicator LED

2: STANDBY button

3: SOURCE SELECT button

4: PLAY/PAUSE button

5: STOP button

6: CD DRAWER

7: AUX INPUT socket

8: PREVIOUS /SCAN- button

9: SKIP / SCAN+ button

10: VOLUME control

11: IR sensor

12: DISC EJECT button

13: LED display

14: ANTENNA cable

15: SPEAKER terminals

16: MAINS cable

Remote Control

17: STANDBY button

18: SOURCE buttons

19: MENU/STOP button

20: PLAY/PAUSE button

21: ENTER button

22: FRWD /TUNE+ button

23: PREVIOUS /SCAN- button

24: NUMERIC buttons

25: TONE button

26: VOLUME -/+ buttons

27: MUTE button

28: DSP button

29: LOUD button

30: SHUFFLE button

31: PROGRAM button

32: FFWD /TUNE- button

33: SKIP / SCAN+ button

34: REPEAT button

35: INFO button

36: EJECT button

User instructions

Connecting an external audio device (cont)

NOTE: when connecting via the headphone output the volume of the Micro system is affected by the volume control on the player.

Ensure that the player is set to about 70-80% to avoid distortion.

UK Mains plug information

For your convenience a mains plug with a fuse (3

Amp) has been fitted to this appliance. For your safety please observe the following information.

Connecting to an external amplifier

Should you wish to connect the CMC4BTMP3 to an external amplifier or soundbar for example follow the below steps .

1: Connect an RCA to RCA audio cable to the AUDIO output (13) on the rear of the unit .

2: Connect the other end of the RCA cable to an audio input on the amplifier/soundbar .

3: Refer to your amplifier instructions to select the correct output .

Earphone connection

1: Connect the 3 .

5 mm earphone plug into the

EARPHONE socket (7) on the unit .

NOTE: To prevent possible hearing damage, do not listen at high volume levels for long periods.

If you hear no sound during playback, do not turn the volume up as the music may suddenly begin at a high volume.

Excessive sound pressure from earphones and headphones can cause hearing loss.

To avoid damaging your ears, adjust the volume to the lowest safe level before playing, and turn up to the desired level when playback has started.

• The unit is designed to operate on AC mains supply 230 volts, 50 Hz.

• The wires in the mains lead are coloured in accordance with the following code:

BLUE

BROWN

- NEUTRAL

- LIVE

Under no circumstances should the Neutral or Live wires be connected to the ‘E’ (Earth) terminal.

Technical specifications

Supply Voltage, Mains: . . . . . . . . . . . . . 230-240V~50Hz

Max. Power Consumption: . . . . . . . . . . . . . . . . . . . . . 20W

Speaker Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 5W

FM: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87.5-108 MHz

Bluetooth: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CSR 4.0

Dimensions CD unit: . . . . . . . . . W150*D200*H150mm

Dimensions speaker: . . . . . . . . . W145*D170*H150mm

Net Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6kg

Care & maintenance

After using your radio

• Set to Standby.

• Switch the unit off at the mains and unplug it if you are leaving it unattended for a long period (holidays etc).

• Avoid leaving batteries fitted if you leave the radio unattended for long periods. They may leak and damage the radio.

Care and cleaning

• All care and cleaning operations should be carried out with the unit unplugged from the mains power.

• Occasionally wipe the cabinet with a lint free duster.

Never clean the unit with liquids or solvents.

Page 8

Disc handling information

• Do not touch the playback side of the disc.

• Do not attach paper or tape to disc.

• Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the centre outwards with a soft cloth. Always keep the disc clean.

• If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth.

• Do not use any type of solvent such as thinner,

• Do not store discs in a place subject to direct sunlight or near heat source. benzene, commercially available cleaners or antistatic spray for vinyl. It may damage the disc.

• Do not store discs in a place subject to moisture and dust such as a bathroom or near a humidifier.

• Store discs vertically in a case, stacking or placing object on discs outside or their case may cause warping.

Disposal information

WEEE marking “Information for the consumer”

Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused . When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/

EC . Please make yourself aware of the local collection system for electrical and electronic products . Please act according to your local rules and do not dispose of your old products with your normal household waste .

The correct disposal of your old product will help prevent potential negative consequences for the environment and human health .

Page 9

User instructions

Troubleshooting

In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below .

If the problem persists, contact the retailer if the machine is still under guarantee .

Customer helpline: 0870 600 3030

Problem

No Power

No Sound CD/LINE IN/RADIO

No Sound from LINE IN input

Sound is distorted

Sound is distorted from AUX input

Unable to Play

Static Sound

Bluetooth connection drops out

Unit switches off after 20 minutes of inactivity

Reason(s)

• Power cable not connected to wall socket

• Power socket is not switched on

• Volume is too low

Solution(s)

• Make sure the plug is connected

• Switch the power on

• Increase the volume

• LINE IN source volume is too low

• Volume is too high

• LINE IN source volume is too high

• Increase the output volume of the

LINE IN source .

• Reduce the volume

• Reduce the output volume of the LINE

IN source .

• No disc in the tray

• Disc not loaded properly

• Disc is dirty

• Poor reception

• Insert a compatible disc

• Check the disc loaded

• Clean the disc

• Re-locate the antenna (FM)

• Obstacle blocking the path to the devices

• Remove the obstacle

• Auto standby mode in operation • This unit is designed to enter

STANDBY mode automatically after

20 MINUTES of inactivity . Press the

STANDBY button to wake the unit .

Page 10

Guarantee

PRODUCT GUARANTEE

This product is guaranteed against manufacturing defects for a period of

Year

This product is guaranteed for twelve months from the date of original purchase.

Any defect that arises due to faulty materials or workmanship will either be replaced, refunded or repaired free of charge where possible during this period by the dealer from whom you purchased the unit.

The guarantee is subject to the following provisions:

The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or consumable items.

The product must be correctly installed and operated in accordance with the instructions contained in this manual.

It must be used solely for domestic purpose.

The guarantee will be rendered invalided if the product is re-sold or has been damaged by inexpert repair.

Specifications are subject to change without notice.

The manufacturer disclaims any liability for the incidental or consequential damages.

The guarantee is in addition to, and does not diminish your statutory or legal rights.

Guarantor: Argos Limited

489 - 499 Avebury Boulevard

Central Milton Keynes

MK9 2NW

Page 11

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals