AEG HAG6003 SKK582F1AF Integrated White Fridge User manual
AEG SKB582F1AF is a freestanding fridge with a user-friendly control panel, plenty of storage space, and adjustable glass shelves for customized organization. Thanks to its low noise operation, it won't disturb your peace. It also features a reversible door for flexible placement.
Advertisement
Advertisement
SKK582F1AF
USER
MANUAL
EN User Manual
Refrigerator
2 www.aeg.com
CONTENTS
11. INFORMATION FOR TEST INSTITUTES........................................................ 15
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support
Register your product for better service: www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the
ENGLISH instructions in a safe and accessible location for future reference.
•
•
•
•
•
•
•
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children aged from 3 to 8 years are allowed to load and unload the appliance provided that they have been properly instructed.
This appliance may be used by persons with very extensive and complex disabilities provided that they have been properly instructed.
Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
Do not let children play with the appliance.
Children shall not carry out cleaning and user maintenance of the appliance without supervision.
Keep all packaging away from children and dispose of it appropriately.
•
•
1.2 General Safety
This appliance is intended to be used in household and similar applications such as:
–
Farm houses; staff kitchen areas in shops, offices and other working environments;
–
By clients in hotels, motels, bed and breakfast and other residential type environments.
To avoid contamination of food respect the following instructions:
–
– do not open the door for long periods; clean regularly surfaces that can come in contact with food and accessible drainage systems;
3
4 www.aeg.com
•
•
•
•
•
•
•
•
•
– store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
Do not use water spray and steam to clean the appliance.
Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
When the appliance is empty for long period, switch it off, defrost, clean, dry and leave the door open to prevent mould from developing within the appliance.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not use the appliance before installing it in the built-in structure due to safety manner.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Make sure the air can circulate around the appliance.
• At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
• Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
• Do not install the appliance close to radiators or cookers, ovens or hobs.
• Do not expose the appliance to the rain.
• Do not install the appliance where there is direct sunlight.
• Do not install this appliance in areas that are too humid or too cold.
• When you move the appliance, lift it by the front edge to avoid scratching the floor.
2.2 Electrical connection
WARNING!
Risk of fire and electric shock.
WARNING!
When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING!
Do not use multi-plug adapters and extension cables.
• The appliance must be earthed.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
• Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor).
Contact the Authorised Service
Centre or an electrician to change the electrical components.
• The mains cable must stay below the level of the mains plug.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
2.3 Use
ENGLISH
WARNING!
Risk of injury, burns, electric shock or fire.
The appliance contains flammable gas, isobutane (R600a), a natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane.
• Do not change the specification of this appliance.
• Do not put electrical appliances (e.g.
ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
• If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
• Do not let hot items to touch the plastic parts of the appliance.
• Do not store flammable gas and liquid in the appliance.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• Do not touch the compressor or the condenser. They are hot.
2.4 Internal lighting
WARNING!
Risk of electric shock.
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.
5
6 www.aeg.com
2.5 Care and cleaning
WARNING!
Risk of injury or damage to the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
• Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.
2.6 Service
• To repair the appliance contact the
Authorised Service Centre. Use original spare parts only.
• Please note that self-repair or nonprofessional repair can have safety consequences and might void the guarantee.
• The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed circuit boards, light sources, door handles,
3. INSTALLATION
WARNING!
Refer to Safety chapters.
WARNING!
Refer to installation instruction document to install your appliance.
door hinges, trays and baskets.
Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models.
• Door gaskets will be available for 10 years after the model has been discontinued.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door to prevent children and pets to be closed inside of the appliance.
• The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
• The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
• Do not cause damage to the part of the cooling unit that is near the heat exchanger.
WARNING!
Fix the appliance in accordance with installation instruction document to avoid a risk of instability of the appliance.
ENGLISH 7
3.1 Dimensions
W1
11
1,6
3°
W3
W2
Overall dimensions ¹
H1
W1
D1 mm mm mm
819
596
547
¹ the height, width and depth of the appliance without the handle and feet
Space required in use ²
H2 mm
W2
D2 mm mm
820
596
550
² the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air
Overall space required in use ³
H2 mm 820
W3
D3 mm mm
777
1120
³ the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum angle permitting removal of all internal equipment
3.2 Location
To ensure appliance's best functionality, you should not install the appliance in the nearby of the heat source (oven, stoves, radiators, cookers or hobs) or in a place with direct sunlight. Make sure that air can circulate freely around the back of the cabinet.
This appliance should be installed in a dry, well ventilated indoor position.
This appliance is intended to be used at ambient temperature ranging from 10°C to 38°C.
The correct operation of the appliance can only be guaranteed within the specified temperature range.
If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest
Authorised Service Centre.
It must be possible to disconnect the appliance from the mains power supply. The plug must therefore be easily accessible after installation.
8 www.aeg.com
3.3 Electrical Connection
CAUTION!
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
WARNING!
This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be observed.
The wires in the mains lead are coloured in accordance with the following code:
A B
C
D
E
• A - green and yellow: Earth
• C - brown: Live
• D - blue: Neutral
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and yellow.
4. CONTROL PANEL
4.1 Switching on
1. Insert the plug into the wall socket.
2. Connect the wire coloured blue to the terminal either marked with the letter
“N“ or coloured black.
3. Connect the wire coloured brown to the terminal either marked with the
“L“ or coloured red.
4. Check that no cut, or stray strands of wire is present and the cord clamp
(E) is secure over the outer sheath.
Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp fuse (B). In the event of having to change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1362) fuse must be used.
WARNING!
A cut off plug inserted into a
13 amp socket is a serious safety (shock) hazard.
Ensure that it is disposed of safely.
3.4 Ventilation requirements
CAUTION!
Appliance must be installed according to installation instruction in order to ensure required ventilation.
3.5 Door reversibility
Please refer to the separate document with instructions on installation and door reversal.
CAUTION!
At every stage of reversing the door protect the floor from scratching with a durable material.
2. Turn the temperature regulator clockwise to a medium setting.
4.2 Switching off
To turn off the appliance, turn the temperature regulator to the "O" position.
4.3 Temperature regulation
The temperature is regulated automatically. However, you can set a temperature inside the appliance yourself.
Choose the setting keeping in mind that the temperature inside the appliance depends on:
5. DAILY USE
CAUTION!
This refrigerating appliance is not suitable for freezing foodstuffs.
5.1 Positioning the door shelves
To permit storage of food packages of various sizes, the door shelves can be placed at different heights.
1. Gradually pull the shelf up until it comes free.
2. Reposition as required.
ENGLISH
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most suitable one.
To operate the appliance:
1. Turn the temperature regulator clockwise to obtain a lower temperature inside the appliance.
2. Turn the temperature regulator counterclockwise to obtain a higher temperature inside the appliance.
9
This model is equipped with a variable storage box which can be moved sideways.
5.2 Movable shelves
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.
Do not move the glass shelf above the vegetable drawer to ensure correct air circulation.
10 www.aeg.com
6. HINTS AND TIPS
6.1 Hints for energy saving
• Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance and shelves evenly distributed. Position of the door bins does not affect energy consumption.
• Do not open the door frequently or leave it open longer than necessary.
• Do not set too high temperature to save energy unless it is required by the characteristics of the food.
• If the ambient temperature is high and the temperature control is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice formation on the evaporator. In this case, set the temperature control toward higher temperature to allow automatic defrosting and to save energy this way.
• Ensure a good ventilation. Do not cover the ventilation grilles or holes.
6.2 Hints for fresh food refrigeration
• The medium temperature setting ensures good preservation of fresh food.
Higher temperature setting inside the appliance may lead to shorter shelf life of food.
• Cover the food with packaging to preserve its freshness and aroma.
• Always use closed containers for liquids and for food, to avoid flavours or odours in the compartment.
• To avoid the cross-contamination between cooked and raw food, cover
7. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
7.1 Cleaning the interior
Before using the appliance for the first time, the interior and all internal the cooked food and separate it from the raw one.
• It is recommended to defrost the food inside the fridge.
• Do not insert hot food inside the appliance. Make sure it has cooled down at room temperature before inserting it.
• To prevent food waste the new stock of food should always be placed behind the old one.
6.3 Hints for food refrigeration
• Fresh food compartment is the one marked (on the rating plate) with .
• Meat (all types): wrap in a suitable packaging and place it on the glass shelf above the vegetable drawer.
Store meat for at most 1-2 days.
• Fruit and vegetables: clean thoroughly
(eliminate the soil) and place in a special drawer (vegetable drawer).
• It is advisable not to keep the exotic fruits like bananas, mangos, papayas etc. in the refrigerator.
• Vegetables like tomatoes, potatoes, onions, and garlic should not be kept in the refrigerator.
• Butter and cheese: place in an airtight container or wrap in an aluminium foil or a polythene bag to exclude as much air as possible.
• Bottles: close them with a cap and place them on the door bottle shelf, or
(if available) on the bottle rack.
• Always refer to the expiry date of the products to know how long to keep them.
accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brandnew product, then dried thoroughly.
ENGLISH
7.4 Cleaning the air channels
1. Remove the plinth (A), then the ventilation grid (B).
B A
11
CAUTION!
Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish.
CAUTION!
The accessories and parts of the appliance are not suitable for washing in a dishwasher.
7.2 Periodic cleaning
The equipment has to be cleaned regularly:
1. Clean the inside and accessories with lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.
3. Rinse and dry thoroughly.
7.3 Defrosting of the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator compartment during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates.
It is important to periodically clean the defrost water drain hole situated under the salad drawers to prevent the water overflowing and dripping onto the food inside.
For this purpose use the tube cleaner provided with the appliance.
C
2. Clean the ventilation grid.
3. Carefully pull the air deflector out (C), checking that there is no water left from the defrosting.
4. Clean the lower part of the appliance with a vacuum cleaner.
7.5 Period of non-operation
When the appliance is not in use for long period, take the following precautions:
1. Disconnect the appliance from electricity supply.
2. Remove all food.
3. Clean the appliance and all accessories.
4. Leave the door open to prevent unpleasant smells.
12 www.aeg.com
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
The appliance does not op‐ erate.
The appliance is noisy.
The compressor operates continually.
Possible cause
The appliance is switched off.
The mains plug is not con‐ nected to the mains socket correctly.
There is no voltage in the mains socket.
Door is misaligned or inter‐ feres with ventilation grill.
The door is not closed cor‐ rectly.
The appliance is not level‐ led.
Door does not open easily.
You attempted to re-open the door immediately after closing.
The lamp does not work.
There is too much frost and ice.
The appliance is not suppor‐ ted properly.
Temperature is set incorrect‐ ly.
Many food products were put in at the same time.
The room temperature is too high.
Food products placed in the appliance were too warm.
The lamp is in stand-by mode.
The lamp is defective.
The door is not closed cor‐ rectly.
Solution
Switch on the appliance.
Connect the mains plug to the mains socket correctly.
Connect a different electrical appliance to the mains sock‐ et. Contact a qualified elec‐ trician.
Check if the appliance stands stable.
Refer to "Control Panel" chapter.
Wait a few hours and then check the temperature again.
Refer to "Installation" chap‐ ter.
Allow food products to cool to room temperature before storing.
Refer to "Closing the door" section.
Refer to installation instruc‐ tions.
Wait a few seconds between closing and re-opening of the door.
Close and open the door.
Refer to "Replacing the lamp" section.
Refer to "Closing the door" section.
ENGLISH 13
Problem
Water flows on the rear plate of the refrigerator.
Possible cause
The gasket is deformed or dirty.
Food products are not wrap‐ ped properly.
Temperature is set incorrect‐ ly.
Appliance is fully loaded and is set to the lowest tempera‐ ture.
Temperature set in the appli‐ ance is too low and the am‐ bient temperature is too high.
During the automatic de‐ frosting process, frost melts on the rear plate.
Door was opened too fre‐ quently.
Solution
Refer to "Closing the door" section.
Wrap the food products bet‐ ter.
Refer to "Control Panel" chapter.
Set a higher temperature.
Refer to "Control Panel" chapter.
Set a higher temperature.
Refer to "Control Panel" chapter.
This is correct.
There is too much con‐ densed water on the rear wall of the refrigerator.
Open the door only when necessary.
Water flows inside the refrig‐ erator.
Water flows on the floor.
Door was not closed com‐ pletely.
Stored food was not wrap‐ ped.
Make sure the door is closed completely.
Wrap food in suitable pack‐ aging before storing it in the appliance.
Food products prevent the water from flowing into the water collector.
Make sure that food prod‐ ucts do not touch the rear plate.
The water outlet is clogged.
Clean the water outlet.
The melting water outlet is not connected to the evapo‐ rative tray below the appli‐ ance.
Attach the melting water out‐ let to the evaporative tray.
The temperature in the appli‐ ance is too low/too high.
The temperature is not set correctly.
The door is not closed cor‐ rectly.
The food products' tempera‐ ture is too high.
Set a higher/lower tempera‐ ture.
Refer to "Closing the door" section.
Let the food products tem‐ perature decrease to room temperature before storage.
14 www.aeg.com
Problem
If the advice does not lead to the desired result, call the nearest Authorized Service
Centre.
8.2 Replacing the lamp
The appliance is equipped with a long-life LED interior light.
It is strongly recommended to use original spare parts only.
Use LED bulbs (E14 base) only. The maximum power is shown on the lamp unit.
CAUTION!
Disconnect the plug from the mains socket.
1. Using a screwdriver, remove the screw from the lamp cover.
2. Detach the lamp cover in the direction of the arrows.
Possible cause
Many food products are stor‐ ed at the same time.
The door has been opened often.
There is no cold air circula‐ tion in the appliance.
Solution
Store less food products at the same time.
Open the door only if neces‐ sary.
Make sure that there is cold air circulation in the appli‐ ance. Refer to "Hints and
Tips" chapter.
3. Replace the bulb with the one that has identical characteristics and is specifically designed for household appliances.
4. Reassemble the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains socket.
7. Open the door.
Make sure that the light switches on.
8.3 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to installation instructions.
3. If necessary, replace the defective door gaskets. Contact the Authorised
Service Centre.
9. NOISES
SSSRRR!
ENGLISH 15
BRRR!
CLICK!
HISSS!
BLUBB!
10. TECHNICAL DATA
The technical information is situated in the rating plate on the internal side of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu
and the model name and product number that you find on the rating plate of the appliance.
See the link label.
www.theenergylabel.eu
for detailed information about the energy
11. INFORMATION FOR TEST INSTITUTES
Installation and preparation of the appliance for any EcoDesign verification shall be compliant with EN 62552.
Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User
Manual at Chapter 3. Please contact the manufacturer for any other further information, including loading plans.
16 www.aeg.com
12. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
*
www.aeg.com/shop
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement