Save This Manual
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
21e
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright 2021 by Harbor Freight Tools . All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
Important Safety Information
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly and when folding or unfolding.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of drugs or medication.
Operation Precautions
1. This product is not a toy. Do not allow children to play with or near this item.
2. Do not exceed weight capacity.
Be aware of dynamic loading!
Sudden load movement may briefly create excess load causing product failure.
3. Use as intended only.
4. Inspect before every use; do not use if parts are loose or damaged.
5. Maintain product labels and nameplates.
These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Specifications
Platform Size
Weight Capacity
19" x 29"
330 lb.
Assembly Instructions
Note: If desired, the Fixed and Swivel Casters (5, 6) can be installed on opposite ends.
Platform (4)
Platform (4)
Fixed
Caster (5)
Swivel
Caster (6)
Washer (7)
Washer (7)
Bolt (8)
1. Attach the Fixed Casters (5) to the
Platform (4) near the Handle Bracket (3) using Washers (7) and Bolts (8).
Page 2
Bolt (8)
2. Attach the Swivel Casters (6) to the other end of the Platform (4) using
Washers (7) and Bolts (8).
3. Tighten all Bolts (8) securely.
For technical questions, please call 1-888-866-5797.
Item 58300
Operation Instructions
Unfolding
Pull up on Handle (1) until it locks into place.
Folding
1. Step on the bar at the base of the
Handle (1), see illustration to the right.
2. Push the Handle (1) forward until it lays flat.
2
1
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175446121 when ordering parts.
Item 58300 For technical questions, please call 1-888-866-5797.
Page 3
Parts List and Diagram
Part Description Qty.
1 Handle
2 Baffle
3 Handle Bracket
4 Platform
1
1
1
1
Part Description Qty.
5 Fixed Caster
6 Swivel Caster
7 Washer
8 Bolt
2
2
16
16
PLEASE READ THE
FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR
DISTRIBUTOR HAS PROVIDED THE
PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE
TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION
OR WARRANTY OF ANY KIND TO
THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT, OR THAT HE OR
SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND
PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER.
THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS
OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT
OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
4
6
8 7
26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
1
2
3
5
