MX-5
MODULAR SPEAKER SYSTEM
Designed for dedicated home cinemas with an acoustically transparent screen
Minimum screen size 16:9 95” (2103 x 1183mm)
Minimum screen size 21:9 92” (2148 x 921mm)
2040
700 including feet
540
315
190
Frequency Range
Power Handling
Sensitivity
Impedance
Configuration
Low Frequency Driver
High Frequency Driver
Weight
Frequency Range
Power Handling
Sensitivity
Impedance
Configuration
Low Frequency Driver
Weight
MX-5 LCR
40 Hz - 20 kHz
100 - 300 Watts RMS recommended amplifier power
92 dB (2.83V / 1m)
8 Ohms
2-Way
Single 205mm (8”) paper cone driver. 38mm (1½”) voice coil wound on high powered aluminium former, with ventilated magnet assembly and copper shorting ring for low distortion
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide
12kg each
MX-5 Subwoofer
30 Hz - 200 Hz
200 - 400 Watts RMS recommended amplifier power
90 dB (2.83V / 1m)
4 Ohms
Bass reflex, down firing vent
Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2”) voice coil wound on high powered Kapton former, with vented magnet assembly
19kg each
krix.com
ADELAIDE | 14 Chapman Road, Hackham, SA, 5163, Australia T +61 8 8384 3433 F +61 8 8384 3419
MX5 Specifications Sheet_009 [email protected].
au Pg. 1 of 1
