Bartscher 190069 Automatic coffee machine KV1 Smart Operating instructions

KV1 Smart
190069
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Technical Support Hotline: +49 5258 971-197
www.bartscher.com
Version: 2.0
Date of preparation: 2021-01-21
EN
Original instruction manual
1
2
3
4
5
6
7
8
Safety ............................................................................................................ 2
1.1
Explanation of Signal Words .................................................................... 2
1.2
Safety instructions.................................................................................... 3
1.3
Intended Use ........................................................................................... 6
1.4
Unintended Use ....................................................................................... 6
General information ....................................................................................... 6
2.1
Liability and Warranty .............................................................................. 6
2.2
Copyright Protection ................................................................................ 7
2.3
Declaration of Conformity ........................................................................ 7
Transport, Packaging and Storage ................................................................ 8
3.1
Delivery Check ......................................................................................... 8
3.2
Packaging ................................................................................................ 8
3.3
Storage .................................................................................................... 8
Technical Data............................................................................................... 9
4.1
Technical Specifications .......................................................................... 9
4.2
List of Components of the Appliance ..................................................... 11
4.3
Functions of the Appliance ..................................................................... 12
Installation and operation ............................................................................ 13
5.1
Installation.............................................................................................. 13
5.2
Operation ............................................................................................... 15
Cleaning and Descaling ............................................................................... 22
6.1
Safety Instructions for Cleaning ............................................................. 22
6.2
Cleaning................................................................................................. 23
6.3
Descaling ............................................................................................... 26
Possible Malfunctions .................................................................................. 28
Disposal ....................................................................................................... 32
190069
1 / 34
Safety
Diese Bedi enungsanlei tung besc hrei bt di e Installation, Bedi enung und Wartung des Geräts und gilt als wic htige Infor mationsquelle und N achschl agewer k. Di e Kenntnis aller enthaltenen Sic herheits hi nweis e und H andlungs anweisungen schafft die Vorauss etz ung für das sichere und s ac hger echte Ar beiten mit dem Gerät. D arüber hi naus müs sen die für den Ei ns atz ber eic h des Geräts geltenden ör tlichen Unfall verhütungs vorsc hriften und allgemeinen Sicherheits besti mmungen eing ehalten wer den. Dies e Bedi enungs anleitung is t Bes tandteil des Produkts und muss i n unmi ttelbarer N ähe des Ger äts für das In¬s tall ations-, Bedi enungs-, Wartungs- und R einigungspers onal jederzeit z ugänglich auf¬bewahrt werden. Wenn das Ger ät an eine dritte Pers on
weiterg egeben wird, muss die Bedi enungsanlei tung mit ausgehändigt wer den.
Read this instruction manual before using and keep it available
at all times!
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1
EN
Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1
Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
2 / 34
190069
Safety
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
, di e
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
1.2
EN
Safety instructions
Electrical Current
•
•
•
•
•
•
•
•
•
•
Too high a mains voltage or incorrect installation may cause electric shock.
The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
To avoid short-circuit, the appliance should be kept dry.
If there are malfunctions during operation, disconnect the appliance from the
power supply.
Do not touch the appliance’s plug with wet hands.
Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
Do not transport the appliance, holding it by the power cord.
Do not allow the power cord to come into contact with heat sources or sharp
edges.
Do not bend, pinch nor knot the power cord.
190069
3 / 34
Safety
•
•
•
Always completely unwind the power cord.
Never place the appliance or other objects on the power cord.
Always take hold of the plug to disconnect the appliance from the power supply.
Flammable Materials
•
•
•
•
•
•
EN
•
Never subject the appliance to contact with high temperature sources, e.g.:
oven, furnace, open flame, heat generating devices, etc.
To avoid fire hazard, clean the appliance regularly.
Do not cover the appliance with, e.g., aluminium foil or cloths.
Use the appliance only with materials designated to this end and with correct
temperature settings. Materials, groceries and left-overs remaining in the
appliance may catch fire.
Never use the appliance near flammable or inflammable materials, e.g.: petrol,
spirit, alcohol, etc. High temperature triggers evaporation of these materials,
and, as a result of contact with sources of ignition, an explosion may occur.
In case of fire, disconnect the appliance from the power supply before
attempting suitable fire-extinguishing actions.
Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
Hot Surfaces
•
•
•
•
Surfaces of the appliance become hot during operation. Burning hazard! High
temperature remains for some time after switching the appliance off.
Do not touch any hot surfaces of the appliance. Use the provided handling
elements and holders.
You may transport and clean the appliance after it cools down entirely.
It is prohibited to sprinkle hot surfaces with cold water or flammable liquids.
4 / 34
190069
Safety
Health hazard due to germs!
•
The water tank must be regularly emptied and disinfected to eliminate the
possibility of accumulation of harmful and dangerous germs.
Supervised Usage only
•
•
Only supervised appliance may be used.
Always remain in an immediate vicinity of the appliance.
Operating Personnel
•
•
•
The appliance may only be operated by qualified personnel and trained
specialist personnel.
This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
Children should be supervised to ensure that they are not playing with or
switching on the appliance.
EN
Improper use
•
•
•
•
•
•
Unintended or prohibited use may cause damage to the appliance.
The appliance may only be used in a technically flawless condition, providing for
safe use.
The appliance may only be used with connections in a technically flawless
condition, providing for safe use.
The appliance may only be used clean.
Use only original spare parts. Never attempt to repair the appliance on your
own.
Do not attempt to modify nor alter the appliance.
190069
5 / 34
General information
1.3
Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
–
1.4
Preparation of various types of coffee beverages, for example: coffee,
cappuccino, espresso, etc.
Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
2
General information
2.1
EN
Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
6 / 34
190069
General information
Our coffee makers are constructed with components that are subject to wear and
tear. As a rule, with correct maintenance of coffee makers, the following
components that are subject to wear and tear sustain dispensing of the following
amounts of beverages:
– pumps: 12.000 dispensing instances
– drain valve: 15.000 dispensing instances
– brewing unit, grinder and seals: 20.000 dispensing instances
Failures of these components that are subject to wear and tear after their reaching
reference dispensing amounts are not considered to be coffee maker flaw.
2.2
Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3
Declaration of Conformity
EN
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.
190069
7 / 34
Transport, Packaging and Storage
3
Transport, Packaging and Storage
3.1
Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2
EN
Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3
Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.
8 / 34
190069
Technical Data
4
4.1
Technical Data
Technical Specifications
Name:
Automatic coffee machine KV1
Smart
Item No.:
190069
Material:
Plastic
Grinder material:
Steel
Number of brewing unit groups:
1
Water tank volume, in l:
1,8
Coffee container volume, in g:
750
Programs:
5
Pump pressure, in bar:
19
Outlet, height regulation, from–to, in
mm:
Dregs container volume, no. of cups,
approx.:
80 - 115
EN
35
Designed for cups/day:
80
No. of cups of 120 ml/h, max.:
40
Minimum brewing volume, in ml:
25
Power supply:
1,4 kW / 230 V / 50-60 Hz
Dimensions (W x D x H) in mm:
305 x 450 x 595
Weight in kg:
16,0
We reserve the right to implement technical modifications!
190069
9 / 34
Technical Data
Version / Characteristics
•
•
•
EN
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Fully automatic
Control: electronic
Settable parameters: grinding coarseness with 5-level scale, coffee dosing,
amount of water, water temperature
Programs: 5 programs, pre-programmed, parameters can be changed
Display: programs, status, maintenance messages, error messages
Automatic switch-off
Grinder: conical burr grinder
Pressure system: piston pressure
Indicator light: ON/OFF
Descaling signal
Fill level indicator
Detachable water tank
ON/OFF switch
Milk frother
Cleaning program
Dregs container is dishwasher safe
2 cups function
Ground coffee options: per cups, manually, 7–14 g
Water supply: 2 options, water tank or water supply from an external water tank
Milk supply: external via a hose
Cup counter (per program and total)
Hot milk or milk frothing selector switch
The set includes: 1 milk hose, 50 cm; 1 water supply hose, 200 cm, 1 coffee
spoon
10 / 34
190069
Technical Data
4.2
List of Components of the Appliance
EN
1. Coffee container
3. Grinding coarseness adjustment knob
5. Milk hose with flow controller
7. Hot water outlet
9. Dregs container
11. Water tank
13. Water tank cover
190069
2. Coffee container cover
4. Housing
6. Coffee outlets
8. Drip tray
10. Drip grate
12. Control panel
11 / 34
Technical Data
Control Panel
Description for Fig. 1
1. Display messages
3. Selector switch for hot milk
5. Coffee strength button / right arrow
button
7. CAPPUCCINO button
9. ESPRESSO button
2. Selector switch for frothed milk
4. Selection button
6. Double cup button / left arrow button
8. COFFEE button
10. ON/OFF button
EN
4.3
Functions of the Appliance
The appliance is designed for preparing various coffee beverages, for example:
coffee, espresso, cappuccino, or latte macchiato, with the use of coffee beans and
cold water, and it is ideal for cafés, cafeterias and offices.
12 / 34
190069
Installation and operation
5
Installation and operation
5.1
Installation
Unpacking / Positioning
•
Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
•
•
•
•
•
If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
Be careful not to damage the rating plate and warning labels fixed on the
appliance.
Never place the appliance in humid or wet environment.
Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
•
Mind the sufficient clearance from the walls and other flammable objects or
objects that are prone to discolouration. This clearance must be at least 5 cm
from the back and both sides, and 15 cm from the top. Note the fire safety
provisions at the place of installation.
•
When in operation, the appliance may not be installed in a cabinet.
190069
13 / 34
EN
Installation and operation
Power supply connection
•
•
•
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
Do not use the appliance with an external timer or remote control.
Water connection
For the water supply, the appliance comes with a factory-installed water tank.
If needed, the appliance may be connected to external water tank (which is located
at the same height as the appliance).
1. Put the lever to 'Tank' position, to use the
integrated water tank.
2. Put the lever to 'Barrel' position, to use the
external water tank.
3. Connect the enclosed silicone hose to the
appliance, and put the other end to the external
water tank.
EN
14 / 34
190069
Installation and operation
5.2
Operation
Important indications
•
•
•
•
•
•
•
Fill the water tank solely with fresh potable water.
Never fill the water tank with warm/hot water, milk nor any other liquid.
Never fill the coffee container (ground coffee container) any instant coffee,
cocoa nor any other powder mixtures. The appliance might get damaged.
Never fill the coffee container with specially prepared coffee beans (e.g. coated
with cocoa or sugar), as this might cause damage to the appliance.
The coffee container may be filled only with roasted coffee beans. Rice, soy
beans, cocoa beans, nuts, sugar, spices, etc., are prohibited.
Always store coffee beans in dry, shaded place. Humid beans may damage the
grinder.
Do not keep coffee beans in the coffee container if the appliance is not to be
used for a longer period of time. Coffee beans may attract humidity and clog the
grinder.
Appliance start-up
1. Plug the appliance into a suitable single socket.
2. Press the ON/OFF switch at the left side of the control panel to activate the
appliance.
With first use, the coffee machine starts with heating-up and cleaning. This helps
the appliance to achieve better working conditions. This process cannot be omitted.
WARNING! Risk of burns!
During the cleaning process, hot water flows from the coffee outlet onto
the drip tray.
Avoid contact with the outflowing hot water.
3. Prior the next setting, make sure the appliance is in the 'ready' mode.
190069
15 / 34
EN
Installation and operation
Switching the appliance off
1.
Press the ON/OFF switch at the left side of the control panel to deactivate the
appliance.
After deactivation, the coffee machine starts the cleaning process. This helps the
appliance to achieve better working conditions. This process cannot be omitted.
WARNING! Risk of burns!
During the cleaning process, hot water flows from the coffee outlet onto
the drip tray.
Avoid contact with the outflowing hot water.
Language setting
1. If needed, set the language.
2. Press the selection button, to go to the menu.
EN
3. Select the 'Language' option in the
menu.
4. Use the '<' or '>' button, to select the
language.
5. Confirm the selected language with
the selection button.
16 / 34
190069
Installation and operation
Water Hardness Setting
1. Press the selection button, to go to
the menu.
2. Use '<' or '>' button, and keep
pressing it to select 'Water
hardness' option and use the
selection button to confirm the
selection.
3. Now, use '<' or '>' button, and keep
pressing it to select the water
hardness level in the local water
mains system and use the selection
button to confirm the selection.
4. Press the selection button to confirm
the setting.
Automatic Switch-off
When 2 hours elapse, the appliance switches off automatically.
The time of automatic switch-off may be set in the range from 5 minutes to 10
hours.
1. Press the selection button, to go to
3. Use the '<' or '>' button, to select the
the menu.
time interval.
2. Use the '<' or '>' button, to select the 4. Confirm selections with the selection
'Auto off' option.
button.
190069
17 / 34
EN
Installation and operation
, beverage s etti ngs, applianc e s etti ngs, etc., sel ect from amongst various s etti ng opti ons by pres sing the '∧' and '∨' setti ng buttons.
Grinding coarseness setting
1. The coarseness of the ground coffee must be adapted to the selected coffee
beans.
NOTE: The grinding coarseness may only be set when the appliance is not
preparing any beverages.
2. Open the grinder cover. It is found before the coffee container.
Use the adjustment knob to set the selected grinding coarseness from 'very fine'
('finest') to 'very coarse' ('roughest').
3. If during preparation the coffee flows very
slowly or does not flow out completely,
set the grinding coarseness to 4 or 5.
4. If the ground coffee is dark, we
recommend the highest coarseness
grinding setting.
5. If the ground coffee is light, we
recommend the finest grinding setting.
The changes to the grinding coarseness will
only be noticeable after 2 or more fresh cups
of coffee are brewed.
EN
Coffee preparation
1. Before starting to prepare coffee, set the selector knob to 'frothed milk'.
2. Press the coffee strength button, as soon as
the display shows the 'Ready' message.
3. Use the '<' or '>' button, and keep pressing it
to change the coffee amount.
When the grinding process is finished, you
cannot change the coffee amount.
4. Use the '<' or '>' button, and keep pressing it
to change the coffee amount.
18 / 34
190069
Installation and operation
5. Select the 'Double cup' button to stop the
frothed milk.
6. Remove the cup, when the display shows
the 'Enjoy' message.
Caffè latte preparation
1. Before starting to prepare coffee, set the selector knob to 'frothed milk'.
2. Press the selection button, as soon as the
display shows the 'ready' message.
3. Press the coffee strength button, until the
display shows the 'caffè latte' message.
EN
4. Press the selection button.
The coffee preparation is commenced.
When the grinding process is started, you
cannot change the coffee amount.
The grinder starts to grind.
5. Use the '<' or '>' button, and keep pressing it
to change the coffee amount.
When the grinding process is finished, you
cannot change the coffee amount. The
appliance starts to heat-up.
190069
19 / 34
Installation and operation
When heated up, the frothed milk is being
prepared.
6. Use the '<' or '>' button, and keep pressing it
to change the time of brewing.
7. Select the 'Double cup' button to stop the
frothed milk.
When the frothed milk is ready, the subsequent
preparation process takes approximately 20
seconds.
8. Use the '<' or '>' button, and keep pressing it
to change the coffee amount.
9. Remove the cup, when the display shows
the 'Enjoy' message.
Cappuccino preparation
EN
1. Before starting to prepare coffee, set the selector knob to 'frothed milk'.
The 'ready' message will be shown on the
display.
2. Press the cappuccino button.
The grinder starts to grind.
3. Use the '<' or '>' button, to select the coffee
amount.
The appliance starts to heat-up.
When the grinding process is started, you
cannot change the coffee amount.
When the heating up process is finished, the
appliance starts milk frothing.
4. Adjust the amount of frothed milk with the '<'
or '>' button.
5. Press the Cappuccino button to stop the
frothed milk.
20 / 34
190069
Installation and operation
6. Use the '<' or '>' button, and keep pressing it
to set the coffee amount.
7. Press the Cappuccino button to stop the
appliance.
The Cappuccino is ready.
8. Remove the cup.
Preparation of double beverages
The appliance may prepared a double coffee or a double espresso.
1. Press the double cup button, as soon as the display shows
the 'Ready' message.
2. Select the beverage. You may select a coffee or an
espresso.
3. Select the beverage strength.
The appliance is factory set to 'strong'.
Using the milk frother
EN
The appliance may be used for preparing frothed milk or hot milk.
1. Connect firmly the milk hose with the milk frother and the milk container.
2. Select from amongst the frothed milk and hot milk, when the
'ready' will be shown on the display.
3. The appliance starts to heat-up.
4. To stop the heating-up process, press the selection button.
5. Press the selection button to prepare the beverage.
6. During the process, you may control the amount of milk,
using the '<' or '>' button.
7. When the 'Ready' is shown on the display, you may prepare
the beverage.
190069
21 / 34
Cleaning and Descaling
Preparing beverages with ground coffee function
The coffee machine is equipped with a function that makes it possible to prepare
coffee with the use of ground coffee.
NOTE:
To prepare coffee with the ground coffee function, the amount of the
ground coffee used must be 5–14 g. Additionally, the coffee must be
coarsely ground to avoid clogging of the brewing unit.
1. Do not let the ground coffee container to come into contact with water.
2. Press the selection button, as soon as the display shows
the 'Ready' message, to go to the menu.
3. Select the function with the use of the '<' or '>' button.
4. Press the coffee strength button, when the 'Use powder' is
shown on the display, to confirm the selection.
5. Open the grinder cover.
6. Add ground coffee.
7. Select the beverage (e.g.: Espresso, Americano, etc.).
EN
6
Cleaning and Descaling
6.1
•
•
•
•
•
Safety Instructions for Cleaning
Before cleaning, disconnect the appliance from the power supply.
Leave the appliance to cool down completely.
Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
22 / 34
190069
Cleaning and Descaling
6.2
Cleaning
1. Wipe the housing of the appliance with a soft, moist cloth, and dry at the end.
2. Execute the brewing process as described in section 'Coffee Preparation'; do
not use coffee if the appliance has not been used for a longer period of time.
Cleaning the Brewing Unit
•
•
•
•
•
After a longer period of use some ground coffee will build up in the brewing unit.
Clean the brewing unit thoroughly to remove the ground coffee.
When the brewing unit is excessively contaminated, the display shows message
“Clean the brewing unit”.
That message is only a reminder as all functions of the machine are still
available.
The cleaning process of the brewing unit takes approx. 10 minutes.
When the brewing unit is excessively
contaminated, the display shows message
“Need brew clean”.
1. Press the settings key to go to cleaning of
the brewing unit.
EN
2. Press the settings key to go to the menu.
3. Use “<” and “>” keys to select
“Maintenance”.
4. Press the settings key to confirm selection.
5. Use “<” and “>” keys to select “Brew clean”.
Confirm selection.
6. Confirm selection by pressing the settings
key.
The brewing unit is cleaned.
7. Open the ground coffee container.
8. Put the cleaning tablet inside.
190069
23 / 34
Cleaning and Descaling
9. Close the ground coffee container.
10. Select “Clean” option in the menu.
The brewing unit is cleaned.
After cleaning the “Ready” message appears on
the display.
Cleaning the Milk System
1. Clean the milk system after each use.
2. To clean the milk system, use a commercially available agent for cleaning milk
systems.
3. Connect firmly the milk hose with the milk frother and the container with cleaning
agent for milk systems.
4. Select from amongst the frothed milk and hot milk, when the
'Ready' will be shown on the display.
The appliance starts to heat-up.
5. To stop the cleaning process, press the selection button.
6. Press the selection button to start the cleaning.
EN
7. During the process, you may control the amount of cleaning
agent for milk systems, using the '<' or '>' button.
When the 'Ready' is shown on the display, the cleaning process
is finished.
8. Repeat the process described above.
9. Use water instead of the cleaning agent for milk systems to remove the remains
of the cleaning agent.
24 / 34
190069
Cleaning and Descaling
Cleaning the dregs container and drip tray
After preparation of 15 cups of beverages, the display will show
the 'empty tray' message.
1. When you remove the dregs container and the drip tray, you
may empty and clean both containers.
2. Clean them with warm water and gentle washing agent.
When both containers are re-installed, the 'ready' message will
be shown on the display.
When the dregs container is full, the display will show the
'Empty tray' message.
When the dregs container is reinstalled, the 'ready' message will
be shown on the display.
,
Cleaning the water tank
1. Remove the water tank.
2. Wash the water tank thoroughly each
time it is filled with water.
3. Then, fill the water tank with fresh
potable water and reinstall it in the
appliance.
4. The water tank should always be
removed very carefully; never let it fall.
Should the water tank get damaged, it
must be replaced immediately.
190069
EN
25 / 34
Cleaning and Descaling
Cleaning the coffee container
1. Remove the coffee container cover
carefully.
2. Always clean the coffee container
with a dry cloth or a paper towel.
3. Replace the cover.
4. Never let the cover fall from the coffee
container. Should the cover get
damaged, it must be replaced.
6.3
EN
Descaling
In the course of daily use of the appliance, depending on the local water hardness,
limescale may build up inside the appliance components. In order to maintain the
appliance in top condition, and in order to be certain that every brewing process
yields the best results, the appliance should be descaled from time to time.
1. Use only appropriate tablets for coffee machines for cleaning and descaling.
2. During descaling, always strictly observe manufacturer's indications concerning
safety, found on the package of the agent.
WARNING!
If, accidentally, the descaling agent comes into contact with eyes or skin,
rinse them immediately with fresh water.
3. Always execute the descaling process in full; interrupting it may cause damage
to the appliance.
The display will show alternating messages: 'Need descale' and
'ready'.
1. Press the selection button, to go to the menu.
2. Press the '<' or '>' button, to go to the system settings
program.
3. Press the '<' or '>' button, to select the 'maintenance' option.
4. Confirm the selection with the selection button.
26 / 34
190069
Cleaning and Descaling
5. Press the selection button and select the 'descale' option.
6. Confirm the setting with the selection button.
Descaling starts and lasts for approximately 30 minutes.
7. Prepare a solution of the descaling agent
and fresh water.
8. Follow the manufacturer’s instructions.
9. Remove the water tank.
10. Fill the water tank with the solution.
Re-insert the water tank.
11. Place a container under the coffee outlet,
that can hold over 10 litres of liquid.
12. When the first cleaning phase is finished, remove the water
tank again.
13. Empty it and fill with fresh water.
14. Re-insert the water tank.
15. Press the selection button to start the second phase of
descaling.
16. Place a container under the coffee outlet, that can hold over
10 litres of liquid.
When the 'ready' is shown on the display, he descaling process
is finished.
190069
27 / 34
EN
Possible Malfunctions
Setting descaling intervals
You may set the intervals, in which the coffee machine should go into descaling
mode.
1. Press the selection button.
2. Use the '<' or '>' button, to select the 'descaling cups' option.
3. Use the '<' or '>' button to define the number of cups after which the appliance
requires descaling.
4. Confirm the selection with the selection button.
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
Problem
Cause
Solution
Coffee is too cold
Cup is too cold.
Rinse the cup with hot water
before use.
EN
Much time elapsed since
Prepare subsequent cups.
last used.
The brewing unit is too cold.
The coffee flows
from the coffee
outlet in drops
The appliance is
grinding coffee
beans very loudly
28 / 34
The coffee was ground too
Select a coarser grinding
finely or the ground coffee is level or use a coarsely
too fine.
ground coffee.
Brewing unit filter clogged.
Clean the brewing unit, as
described in section 6
'Cleaning'.
There are foreign objects in
the grinder.
Contact the service
company.
190069
Possible Malfunctions
Problem
Cause
Solution
The 'Fills the tank
with water'
message is shown
on the display,
although the water
tank is full
The water tank inductor is
covered.
Clean the water tank, as
described in section 6
'Cleaning'.
The 'Fill with coffee In the coffee container there
beans' message is is too high a humidity and
shown on the
the container is sticky.
display, although
the coffee
container is full
Stir the coffee beans in the
container.
Check if the coffee beans
are not roasted too
excessively or if they were
roasted with charcoal.
Clean the coffee container,
as described in section 6
'Cleaning'.
The 'Error'
message is shown
on the display
190069
The appliance cannot start
any more.
Contact the service
company.
EN
29 / 34
Possible Malfunctions
Possible Error Messages on the Display
Display Message
Cause
Solution
Empty the drip tray
The drip tray is full, and the
beverage preparation
functions are not operating.
Remove the drip tray, empty
it and reinstall it in the
appliance.
Empty the dregs
container
The dregs container is full,
and the beverage
preparation functions are
not operating.
Remove the dregs
container, empty it and
reinstall it in the appliance.
Fill the water tank
The water tank is empty,
and the beverage
preparation functions are
not operating.
Fill the tank with fresh
potable water.
Fill with coffee
beans
The coffee container is
empty, and the beverage
preparation functions are
not operating.
Fill the coffee container with
coffee beans.
Too little of ground
coffee
There is not enough of
ground coffee in the
container.
Fill with ground coffee, and
press the 'Release' button.
Install the drip tray
The drip tray is removed,
and the beverage
preparation functions are
not operating.
Install the drip tray in the
appliance correctly.
EN
30 / 34
190069
Possible Malfunctions
Display Message
Cause
Solution
System is empty
Not enough water in the
appliance water supply
hose, and the beverage
preparation functions are
not operating.
To confirm, press the
selection button.
High temperature
Temperature in the
appliance is too high.
Disconnect the appliance
from the power supply and
wait for it to cool down.
Next, restart the appliance.
Temperature is too
low
The ambient temperature in
installation location is too
low.
Keep the ambient
temperature of at least
10°C.
High pressure
The used coffee beans are
too dark or the coffee is
ground too finely.
Set the coarser grinding
level of 4–5 or use a
coarsely ground coffee.
EN
Brewing unit error
190069
Brewing unit filter clogged.
Run the cleaning program
for the brewing unit.
Internal component error.
Restart the appliance.
31 / 34
Disposal
8
Disposal
Electrical Appliance
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
Electrical appliances should be returned to designated collection points.
EN
32 / 34
190069

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project