SHM-Series Snap-Action Temperature Controls
The SHM-Series style temperature controls have a bi-metal disc that senses the temperature and quickly separates the contacts. This results in long life characteristics at loads up to 25 amps at 240 VAC. SHM-Series switches are single pole single throw 60T15 style (3/4”) with manual-reset. These switches are designed to open on temperature rise. The surface mounting configuration positions the disc against the mounting surface to sense the actual surface temperature. Each switch comes with an adapter flange plate. For air-stream installation, simply attach the SHM control with the bi-metal protruding through the mounting surface. For surface installation, insert the two spacers between the screw holes in the flange, and the heating surface.
Install the original screws and tighten securely.
Reset Button
SHM Control
Adapter Flange Plate
Terminal Screws
Terminals
Part No. Close Open °F
SHM125 Manual 125
SHM130 Manual 130
SHM160 Manual
SHM170 Manual
SHM180 Manual
SHM200 Manual
SHM210 Manual
SHM290 Manual
SHM350 Manual
160
170
180
200
210
290
350
Spacers
Air Stream Mounting
Contact Arrangement FLA LRA Pilot Duty VA Resistive Amps Voltage AC
1 & 3 SPST
1 & 3 SPST
10
5
60
30
125
125
25
25
120
240
