Dormakaba 980 Installation Manual
Advertisement
Advertisement
I N s t A L L A t I O N 980
ECONOMY PushbuttON
Instructions
1. Solder the leads to the switch according to the diagram below.
2. Ensure that all connections are properly attached to the terminals according to the mode of electrical device.
3. Connect leads to the electric locking device and check for proper operation, then fasten the face/mounting plate to a utility box (supplied by others).
switch terminals
a & b Lamp (not provided)
3 & 4 normally open
1 & 2 normally closed
Description switch Mode
980-MO Pushbutton Momentary Action
NOTE: Specifications are subject to change without notice.
switch Configuration
2-SPST switch Rating
5A @250V standard Finish
32D
IS980-2 © 2018 dormakaba Canada Inc.
www.rutherfordcontrols.com • Phone: 1.800.265.6630 • Fax: 1.800.482.9795 • Email: [email protected]
PCN18003
R02-18GR-1

Public link updated
The public link to your chat has been updated.
Advertisement