Acer AL1917W Monitor Installation instructions


Add to my manuals
12 Pages

advertisement

Acer AL1917W Monitor Installation instructions | Manualzz

Table of Contents

TCO 03 Notice............................................................................................................................................................

1

FCC Statement Warning............................................................................................................................................

2

Canadian DOC Notice...............................................................................................................................................

3

Precautions................................................................................................................................................................

3

Package Contents......................................................................................................................................................

4

Installation Instructions..............................................................................................................................................

4

Assembling the Monitor...................................................................................................................................

4

Detaching the Monitor .....................................................................................................................................

4

Adjusting the Viewing Angle ...........................................................................................................................

4

Connecting the Devices ..................................................................................................................................

4

Switching the Power .......................................................................................................................................

5

Adjusting Display Settings .........................................................................................................................................

5

External Controls ............................................................................................................................................

5

OSD Options .............................................................................................................................................................

5

OSD Menu ........................................................................................................................................................

6

Brightness & Contrast ................................................................................................................................

6

Tracking .....................................................................................................................................................

6

Position ......................................................................................................................................................

6

Color ..........................................................................................................................................................

6

Language Setting.........................................................................................................................................

7

OSD Option..................................................................................................................................................

7

Auto Configuration........................................................................................................................................

7

7

Recall...........................................................................................................................................................

7

General Specifications...............................................................................................................................................

8

Technical Information.................................................................................................................................................

8

Pin Assignment ..................................................................................................................................................

9

Standard Timing Table.......................................................................................................................................

10

Troubleshooting..................................................................................................................................................

11

Congratulations!

The display you have just purchased carries the TCO’03

Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.

Some of the features of the TCO’03 Display requirements:

Ergonomics

Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.

Energy

Energy-saving mode after a certain time – beneficial both for the user and the environment

Electrical safety

Emissions

Electromagnetic fields

Noise emissions

Ecology

The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001

Restrictions on

chlorinated and brominated flame retardants and polymers

heavy metals such as cadmium, mercury and lead.

The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit www.tcodevelopment.com

IT Equipment Recycling Information

IT Equipment Recycling Information:

Acer is strongly committed to environmental protection and views recycling, in the form of salvaging and disposal, of used equipment as one of the company’s top priorities in minimizing the burden placed on the environment.

We at Acer are very conscious of the environmental forces that impose on our business and strive to identify and provide the best working products to reduce the environmental impact of our products.

For more information and help in recycling, please visit the following websites:

Worldwide: http://global.acer.com/about/sustainability.htm

Visit www.global.acer.com for further information on our other products and its features and benefits.

Lamp Disposal

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF

ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE

ELECTRONIC INDUSTRIES ALLIANCE AT WWW.

EIAE. ORG . FOR LAMP SPECIFIC DISPOSAL

INFORMATION CHECK WWW.

LAMPRECYCLE. ORG .

Waste Electrical and Electronic Equipment (WEEE) Directive

Do not throw this electronic device into the municipal trash bin when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. For more information about the collection of WEEE welcome to visit our homepage at www.acer.com under environment.

2

NOTE

A shielded-type signal cord is required in order to meet the FCC emission limits and also to prevent interference to the radio and television reception. It is essential that only the supplied signal cord be used.

Canadian DOC Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-

Causing Equipment Regulations.

Cet appareil numerique de la classe B repecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.

Preface

This manual is designed to assist users in setting up and using the LCD Monitor. Information in his document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.

Important Safety Instructions

1. To clean LCD Monitor screen;Power off LCD Monitor and unplug the AC Cord.

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD Monitor near a window. Exposing the monitor to rain

water, moisture or sunlight can severely damage it.

3. Do not apply pressure to the LCD screen.

Excess pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any

nature should be performed by an authorized technician.

5.Operate LCD Monitor in a room with a room temperature of 5°C ~ 40°C (or 41°F ~

104°F).Operating LCD Monitor outside this range could result in permanent damage.

of the following occurs, immediately unplug your monitor and call an authorized

technician.

* Monitor to PC signal cable is frayed or damaged.

* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.

* LCD Monitor or the case is damaged.

3

Package Contents

Power Cord Audio Cable VGA Cable

User Manual (CD) Quick Start Guide

Assembling the Monitor

DVI Cable (option)

1. Position the monitor on top of the stand.

2.Connect the stand into the neck of monitor along the track.

Detaching the Monitor

Important

First, find a clean, flat surface to place the monitor after removing it from the stand. Place a clean dry cloth under the monitor to protect it further. Pull the monitor slightly up and away from the stand.

Adjusting the Viewing Angle

The viewing angle of the monitor ranges from forward 5° to backward 15°.

Caution:

Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in damaging the Monitor and Monitor stand.

Connecting the Devices

Please shut down the power of computer and monitor before you do the connection.

4

(1)

(2)

(3)

(4)

Power Cord

Audio Cable

DVI Cable

(option)

VGA Cable

Attach the monitor to the power cord which should then be inserted into a properly grounded electric socket.

Connect the audio cable to the green audio jack on the back of monitor.

Connect the signal cable to the DVI output socket of the graphics card on the computer. Then tighten the thumbscrews on the connector

Connect the signal cable to theVGA output socket of the graphics card on the computer. Then tighten the thumbscrews on the connector

WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches the shape of the socket it is inserted into, and that none of the pins are bent or otherwise damaged.

Operating Your Monitor

First, switch the power on to the monitor, then switch the power on to the computer. When you see the LED on the power button go green, this indicates the computer is ready for use. Allow about 10 seconds for the video signal to appear. If you do not see the green light on the power button or a video signal, check the connections .

1

2

AUTO

4 MENU OSD Menu

Power

If OSD isactiv e, press to exit. If OSD is inactive, press and the monitor will automatically optimize the display position, clock and phase of your display.

If OSD is active, press to select or adjust OSD options.

If OSD is active, press to select or adjust OSD options.

Press to view OSD. Press AUTO to exit.

Power on/off

Green: power on

Orange: in sleep mode

OSD Options

Please refer to "External Controls " on Page 5. To adjust the OSD settings :

1. Press the MENU button to open the OSD menu.

2. Use the buttons marked < or >, to highlight a control, then press the MENU button to enter

3. Use the buttons marked < or >, to adjust the control to the desired level.

4. When you have finished making all selections, press the MENU button to exit the OSD. (Or the adjustment

will auto-save after 20 seconds.)

5

OSD Menu

Brightness & Contrast

BRIGHTNESS:

This adjusts the brightness of the picture on the screen.Adjustable range from the value of 0 to 100.

CONTRAST:

This adjusts dark and light shades of color relative to each other to achieve a comfortable contrast.

Adjustable range from the value of 0 to 100.

Tracking

FOCUS:

This removes any horizontal distortion and makes the picture clear and sharp .

CLOCK:

If there are any vertical stripes seen on the background of the screen this renders them less noticeable by minimizing their size. It also changes the size of horizontal screen.

Position

V-Position:

This removes any horizontal distortion and makes the picture clear and sharp.

H-Position:

This adjusts the horizontal.

T

Color Temperature

There are three ways of adjusting color temperature:

WARM:

Set the color temperature as CIE coordinate 6500°K.

COOL:

Set the color temperature as CIE coordinate 9300°K.

User defined:

You can adjust the colors red, green and blue to th e intensity you desire.

6

Language

Select the OSD menu language .

OSD Position

This changes the position of the OSD window on the screen.

TIMEOUT function allow user define the OSD appearing period from 10 seconds to

120 seconds.

Source Change ( for analog only model )

Select turn on or turn off DDC / CI function.

Source Change ( for dual input model )

Analog and Digital source change .

Select turn on or turn off DDC / CI function.

DDC/CI ON OFF

Information

This shows brief information on the screen.

7

Recall

Recall to factory default settings

General Specification

AL1917W C

Item Specification

Display

Max Resolution

19-inch Flat panel active-matrix TFT LCD

1440 x 900 @75Hz

Pixel Pitch 0.284 mm X 0.284 mm

Color

Brightness

16.2M

300nits (Typical)

Contrast Ratio

Response Time 2 ms (Gray to Gray)

View Angle of Horizontal 150°

View Angle of Vertical

Speaker

700:1(Typical)

135°

1Wx2

Power Button

Control Buttons

ON/ OFF

AUTO, MENU, <, >

VGA + DVI-D (option) Video In

Sync

Plug & Play

TTL (+/ -)

DCC / CI

Power Source

Power Consumption During

Normal Operation

Power Consumption During

Active off Operation

Dimension (W_H_D)

Weight (Net/Gross)

100-240V AC, 50/60 Hz, 1.5A

<45W

< 1W

447.27x382.38x184.6mm (base included)

5.2Kg/6Kg

8

Technical Information

Pin Assignment Signal Signal

PIN Description PIN Description

1 Red 9 +5V

2 Green 10 GND

3 Blue 11 GND

4 GND 12 DDC_SDA

5 Detect 13 HSYNC

6 Red_GND 14 VSYNC.

7 Green_GND 15 DDC_SCL

8 Blue_GND

Digital Video Input Connector : DVI – D (option)

1

2

3

4

5

6

7

8

TX2-

TX2+

Shield (TX2 / TX4)

NC

NC

DDC-Serial Clock

DDC-Serial Data

NC

13

14

15

16

11

12

9

10

TX1-

TX1+

Shield (TX1 / TX3)

NC

NC

+5V power

Ground (+5V)

Hot plug detect

17

21

22

23

24

18

19

20

TX0-

TX0+

Shield (TX0 / TX5)

NC

NC

Shield (TXC)

TXC+

TXC-

9

Standard

T

iming

T

able

If the selected timing is NO T included in table below, this LCD monitor will go into the sleep mode.

Mode Resolution Total

VESA MODES

Horizontal

Nominal

Frequency

+/-0.5KHz

Sync

Polarity

Vertical

Nominal

Frequency

+/-1Hz

Sync

Polarity

Nominal

Pixel Clock

(MHz)

VGA

SVGA

XGA

1280*768@60Hz 1664*798 47.776

59.870

79.500

SXGA

WXGA+

VGA

SVGA

XGA

XGA

SXGA

640*[email protected]

832*624@75Hz

1152*870@75Hz

864 *525

1152*667

1456*915

720*400@70Hz 900*449

1024*768@72Hz 1360* 800

1280*1024@70Hz 1696*1072

35.000

49.725

68.681

OTHER MODES

31.469

57.669

74.882

P

N

N

P

N

P

66.667

74.550

75.062

70.087

72.086

69.853

P

N

N

P

N

P

30.240

57.283

100.00

28.322

78.434

127.000

Troubleshooting

This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA cardis selected.

Attention

This LCD Monitor Supports Multiple VGA Modes. Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.

10

PROBLEM Picture is unclear and unstable

The picture is unclear and unstable, please perform the following steps :

1. Enter PC to "Shut Down Windows" status while you're in MS-Windows environment.

2. Check the screen to see if there's any black vertical stripes appear. If there are,take advantage of the "Clock" function in OSD menu and adjust (by increment or decrement numbers)until those bars disappear.

3. Move to "FOCUS" function in OSD menu again and adjust the monitor screen to its most clear display.

4. Click "No" on "Shut Down Windows" and back to the normal PC operating environment.

PROBLEM There is no picture on LCD Monitor

If there's no picture on the LCD Monitor, please perform the following steps:

1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured,and the system is running on the correct timing. Refer to Chapter 3 for information on timing.

2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture,press the Adjustment Control button several times.

3. If step 2 doesn't work, connect your PC system to another external CRT.If your PC system Functions properly with a CRT Monitor but it does not function with the LCD Monitor,the output timing of the VGA card may be out of the

LCD's synchronous range.

Please change to an alternative mode listed in the Standard Timing Table or replace the VGA card,and then repeat steps 1 and 2.

PROBLEM There is no picture on LCD Monitor

If you have chosen an output timing that is outside of the LCD Monitor's synchronous range (Horizontal: 31.5 ~ 80 KHz and Vertical:56 ~ 75 Hz), the OSD will display a " Inp ut n o t support " message. Choose a mode that is supported by your

LCD Monitor. Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will displaya message "No Signal" .

Caution: Do not attempt to service the monitor yourself or open the computer yourself.

Please refer all servicing to qualified service personnel if the problems cannot be solved in "Troubleshooting" section.

1 1

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 48.3 cm (19")
  • 1280 x 1024 pixels
  • 5 ms 300 cd/m² 700:1
  • 45 W

Related manuals

advertisement