Fisher Minute Mount RD/HD, MC, EZ-V, Minute Mount 2 SD, RD/HD, LD, MC, EZ-V, XBLADE, XLS, XtremeV, HT, Homesteader, POLY-CASTER, PRO-CASTER, SPEED-CASTER, SPEED-CASTER 2, Model 110, Model 500, Model 1000, Model 2000, Model 2500 Reference Manual
Below you will find brief product information for snowplow Minute Mount RD/HD, snowplow Minute Mount MC, snowplow Minute Mount 2 SD, snowplow Minute Mount 2 RD/HD, snowplow Minute Mount 2 LD, snowplow Minute Mount 2 MC, snowplow Minute Mount EZ-V, snowplow Minute Mount 2 EZ-V, snowplow XBLADE, snowplow XLS, snowplow XtremeV, snowplow HT, snowplow Homesteader, spreader POLY-CASTER, spreader PRO-CASTER, spreader SPEED-CASTER, spreader SPEED-CASTER 2, spreader Model 110, spreader Model 500, spreader Model 1000, spreader Model 2000, spreader Model 2500. These products are all designed to make your job of clearing snow easier and more efficient. Each product has its own unique features and benefits, so be sure to read through the information below to find the right product for your needs.
Advertisement
Advertisement
Table of Contents
Web Site Technical Resources ................................. 4
Literature Number & Description (most used) ........ 5
Blades & Attachments ............................................ 11
Minute Mount ® Peculiar and Common
MC Series Part Identifi cation ................................. 13
Blade Attachment Charts ...................................... 14
Conventional Pushbeam Identifi cation .................. 16
Replacement Part Numbers for Weld
on Shoe Tube Holders. ...................................... 20
Minute Mount/Minute Mount ® 2 RD/HD
M Blade A-Frame Identifi cation ......................... 22
Conventional Peculiar and Common
Cutting Edge/Cutting Edge Bolt Bag
Identifi cation ...................................................... 26
Electrical Components............................................ 27
4-Port to 3-Port Isolation Module
Plug-In Harness Kit Cross Reference ............... 27
Isolation Module System Connector
Identifi cation and Wiring .................................... 28
Harness Repair Ends ............................................ 29
Original Minute Mount Wiring to Isolation
Module System Cross Reference ...................... 29
XtremeV™ or XLS™ Schematic w/o Plow Lights . 30
Straight Blade Schematic w/o Plow Lights ............ 30
E-Force Isolation Module System ......................... 31
Plug-In Harness Conversions for
Original Minute Mount Electrical System
Minute Mount Electrical Kits Index ........................ 34
Conventional Electrical Kits Index ......................... 36
Hydraulic Components ........................................... 38
Minute Mount Hydraulic Kits Index ........................ 38
Hydraulic Cylinder Identifi cation ............................ 40
Hydraulic Hose Identifi cation ................................. 41
Pump Shaft Seals ................................................. 41
Conventional Hydraulic Kits Index ........................ 42
Recommended Tools .............................................. 44
Spreaders ................................................................. 45
Hopper and Tailgate Spreader Service Part
Identifi cation ...................................................... 45
Spreader Gear Box Reference Chart .................... 46
Miscellaneous .......................................................... 50
Clevis Pin Identifi cation ......................................... 50
"Dashed" Kit Numbers .......................................... 51
Safety Defi nitions
WARNING
Indicates a potentially hazardous situation that, if not avoided, could result in death or serious personal injury.
NOTE: Indicates a situation or action that can lead to damage to your snowplow and vehicle or other property. Other useful information can also be described.
CAUTION
Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
NOTE: This manual is for reference only and was created to serve as an addition to the FISHER ® Service
Training Manual. It contains information on noncurrent products that are often the subject of technical questions and problems. This material is not complete, may not be accurate, and should not be used in place of the Kit Selection Guide/eMatch or other regularly updated documents. Additional product information is available on the Internet at www.fi sherplows.com and www.homesteaderplows.com or from the Fisher Engineering Technical Service Department.
Lit. No. 29032, Rev. 04 July 1, 2009
REFERENCE MATERIALS
Web Site Technical Resources
Located under the "Tech Support" section of our Web site (www.fi sherplows.com) are some technical resources that you should know about. These resources often go unused and can be a practical aid to help in snowplow and spreader diagnosis and repair. The reference documents on the Web site can be printed and bound as a manual for quick reference by Parts & Accessories employees or simply viewed online when needed.
There are 2 main headings under the "Guides" section on the Web site:
1. Mechanic's
• Mechanic's Guides (all complete currently offered guides)
2. Schematics
• Schematics for the Minute Mount ® System with original headlamps
Located under the "Reference Materials" heading in the "For Our Distributors" section are the following documents:
1. Service Training Manual
• This workbook, updated each summer, is used at our Factory Authorized Service Training (FAST) schools.
• Each year, every FAST school attendee receives a hard copy of this manual. Distributors without attendees are mailed copies.
2. Reference Manual
• This manual contains hard-to-fi nd Conventional and Minute Mount System snowplow, as well as spreader, information from many sources, including some of those listed above.
• The reference manual is a great resource to help you and your customers identify parts.
Lit. No. 29032, Rev. 04 4 July 1, 2009
LITERATURE
Kit #
7126
7164
7172
7173
7174
7176
7183
7187
7188
7128
7131
7132
7136
7150
7152
7152-1
7159-2
Kit #
7148
7154
7154-1
7160
7161
7168
7169
7171
7175
7177
7182
7125
7129
7138
7139
7142
7144
7146
7146-1
Minute Mount
®
& Minute Mount
®
2 System Mount Kit Literature
Chevy/GMC Dodge
PL
6452
6454
6459
20547
26201
6485
21320
26205
22303
26563
28505
64554
64464
64690
29512
69273
40875
Toyota
PL
26207
25998
26077
68161
64014
64203
26678
26870
29354
Ford
PL
6465
6478
20809
20607
21705
6430
6457
6476
6496
21633
II
29042
29214
29043
29044
26200
26206
68162
64019
64025
64015
64204
26677
26871
29353
II
42001
29031
26204
63890
29046
28504
64555
64463
64689
29513
69274
40876
II
Kit #
7165
7167
7170-1
7170-2
7178
7180
7186
7189
7124
7130
7137
7141
7149
7153
7155
7157
Kit #
7162
7162-1
7179
Kit #
7140
7151
7151-1
7151-2
Kit #
7163
7163-1
Kit #
7143
7190
Kit #
7156
7156-1
PL
6449
6435
6463
6480
21588
21410
21849
21930
26689
63804
64062
29126
27271
29185
29824
40962
Mitsubishi
PL
22507
26861
27657
International
PL
6467
21352
27055
26203
Jeep
PL
26376
48430
Nissan
PL
20570
41151
Universal
PL
22036
26209
II
29142
64065
26165
63803
64061
29127
27272
29186
29823
40963
II
29045
27656
II
26202
II
29215
II
41152
II
26208
Kit #
7147
7158
7166
7185
21988
27014
29566
20578
27638
27638
29567
Lit. No. 29032, Rev. 04 5 July 1, 2009
LITERATURE
Minute Mount
®
& Minute Mount
®
2 System Mount Kit Literature
Owner's Manuals
MM2 SD, HD, XBLADE™, XLS™, XtremeV™
MM2 LD, RD/HD, X, MC (Isolation Module)
MM2 EZ-V
®
(Insta-Act
®
, Isolation Module)
MM (Insta-Act, Isolation Module)
MM EZ-V (Insta-Act, Isolation Module)
MM SEHP (Relay System)
Minute Mount 2 System Blades
HT Series™ (69450)
XLS (50810)
XtremeV
(44675-1, 44685-1, 44695-1, 44775-1, 44785-1, 44795-1)
Lit. No.
A-Frames
44224 MC A-Frame/Angle Frame (28665)
26405 MC A-Frame/Angle Frame (27255-1)
26406 MC (20703-1)
26407 MC (8446-1, 27255)
26467 HD (22168)
21462 RD/HD M-Series (27597, 27598)
PL
RD (27150)
69381 SD, 6'-9" & 7-1/2' (27995-1)
50578 LD, 6'-9" & 7-1/2' (27995-1)
44226 LD, 7-1/2' (22175)
PL
26947
27918
20793
II
with
Headgear
20796 27331
22227 22195
27639
27082
68256
26457
22264
27476 with
Headgear
22263
22195
XBLADE
(27510-1, 27512, 28100-1, 28200, 28510-1, 28520,
29100-1, 29200, 29618-1, 29619-1)
44916 LD, 6'-9" (22169)
MM2 EZ-V (Includes A-frame II) (28885, 28895) 27592
MM2 MC Series (12/04-__) (29250, 29350)
Minute Mount 2 System Headgear PL
26945 HT Series (69450 69381
II
69382
MM2 MC Series (9/01-12/04) (27250, 27350)
MM2 SD Series (27775, 28069)
MM2 LD Series (27775, 28069)
Minute Mount System Blades
MM EZ-V (includes A-frame II) (21442, 26596)
Blade Stop Kit (44473)
Blade Wing Extension (44610-1)
4-Piece Cutting Edge Kit (29675)
SnoFoil
HT Series (69660)
®
Accessories
26180 XLS (50600)
68257 XtremeV (44600, 446500)
50578
44226
26183 EZ-V (28888)
PL
MC Series (29999)
21808 HD/XBLADE Series (27777, 28900)
27591
26156
27370
20801 RD/HD/XBLADE Series (27777, 28900) 27475 MM MC (__-9/01)(22350, 21000)
M Series (27500, 28000, 28500, 29000) 26093 SD Series (27750-1)
MM LD Series (22609, 22075) 22231 LD Series (27750-1)
L Series (7657, 7658, 7659, 7761, 28850)
Accessories
XtremeV Blades
21987
Minute Mount System Headgear
EZ-V (8840-1)
PL/II
MC (8445, 8446-1, 27255)
Back Drag Edge Kit (44281-1, 44282-2, 44283-2) 29406 HD (22250 w/M Blades)
44815 HD (22250 w/L Blades)
44618 RD/HD (22240 w/M Blades)
29665 RD/HD (22240 w/L Blades)
PL/II
HS/LD (22230)
69687 LD (22135)
27370
26181
PL
21807
20796
22229
22228
22248
22249
50579
44227
27589
26157
27446
27476
27374
26474
II
26631
27331
26094
22195
26094
22195
22195
RD/HD M Series (27100)
7-1/2'–10' RD/HD, LD & MC Series Blades
Shoe Kits
XLS Shoe Kit (50700)
XtremeV Curb/Wear (44850-1, 44851-1)
XBLADE Curb/Wear (27222)
Curb Guard Kits (44405, 44406)
LD, SD Series (26145)
HS Series (20505)
Other
Blade Stop Kit (26634)
Control Dual-Lock Fastener Mounting Kit
Removable Spring Tool (20043)
ProTube™ Guard (26239, 26240)
Ballast Retainer Kit (62849)
MM2 Emergency Parts Kit (27930)
Skid Plate Kit (20555)
License Plate Bracket (22366)
26449
Rubber Defl ectors
29644 HT Series (69605)
PL/II
XLS (50628)
50699 XtremeV (44710)
44852 EZ-V – 8-1/2' (21619)
26683 EZ-V – 9-1/2' (26572)
44416 XBLADE (8' & 9' only) (27600)
26147 XBLADE (all blades) (27600-1)
20506 MC Series (22390)
PL/II
7-1/2' – 9' LD/RD/HD (All Series)
26650
Lights
20275 Mini Strobe (26018-1 and 26018)
6486 Full Size Strobe (26019)
26244 Mini Bar (26020)
28338 Full Size Bar (26021)
26374
Other
20550 Headlamp Extension Bracket Kit (28330)
22358 Headlamp Extension Bracket Kit (29596)
PL/II
69686
50690
29401
21894
26573
27605
26647
22395
26031
PL/II
26214
26415
26416
26417
PL/II
28334
29597
Lit. No. 29032, Rev. 04 6 July 1, 2009
LITERATURE
POLY-CASTER™, PRO-CASTER™ and SPREADER KIT LITERATURE
Body
Comp
PL
Chutes
PL
Drive
Comp
PL
Durst
Gear
Case
PL
Parts Kit
PL
Cab
Control
& Elec
Comp
II/PL Description
POLY-CASTER
Poly Hopper II
Spreaders
POLY-CASTER
Poly Hopper
Spreaders
PRO-CASTER
Hopper
Spreaders
Serial #
0901–Higher
0001–0608
0609–0711
0712 – Higher
0126–0302
OM
94197
95749
94865
II
94194
95742
94867
0303–0401
0402–0608
0609–0805
95617 95615
95903 95901
0806 – Higher
Old-Style
Hopper
Spreaders
2600–3849
3850–4763
4764–4808
4809–4996
4997–5644
5645–7663
96208
80324
80357
68880
96210
80309
80359
68938
94633 94635
94873
95844
95921
96111
94869
(Offset)
95243
(Hydr)
95491
(Center)
95243
(Hydr)
94871
95905
96202
See OM for PL; see
II for Maintenance
96206
See below*
See below*
See below*
94639
94191
94641
(RC)
94643
(HC)
94637
N/A
N/A
N/A
68956
N/A
N/A
94875
96204
94189
96378
94647
96200
94651
94649
(Gas)
94651
(Hyd)
68964
(Std Cab
Control)
94647
(11-pin Cab
Control)
* Drive Comp
Briggs RC
Briggs HD
Tecumseh
PL
68916
68917
68959
II
See
Hopper II
94493
Accessories
Top Screen Fastener Repair Kit
Vehicle Battery Kit II/PL
Baffl e Replacement Kit PL
Inverted Vee RC MS PL
Inverted Vee RC SS PL
Inverted Vee HC MS & SS PL
Ratchet Tie-Down Strap Kit PL
Hold-Down Kit PL
CHMSL Kit PL
Belt Drive Idler Kit II/PL
Work Light Kit II/PL
Lit. No. 29032, Rev. 04
POLY-
CASTER
96047
PRO-CASTER
0806 –
Higher
0126 –
0805 Old Style
95969
96212
N/A
94879
96202 94873
94644
68819
68970
68971
68972
96202
68791
68599
94873
95707
95715
6456
7 July 1, 2009
LITERATURE
SPEED-CASTER™ & SPEED-CASTER™ 2 Spreaders
MOUNT
Vehicle Make
Dodge
Ford
GM
Kit #
27936
63827
67040-2
65780
67450
67500
64720
65890
67470
67510
67925
Under-Frame
II
27949
63845
13761
13762
67460
67498
64722
13760
67477
67523
67523
PL
27950
63844
68726
68721
68746
67491
64723
68719
68720
67524
95695
II
13666
13666
13666
13666
13666
13666
13666
13666
13666
13666
13666
In-Bed
PL
68689
68689
68689
68689
68689
68689
68689
68689
68689
68689
68689
Support Frame
II
27949
63845
13761
13762
67460
67498
64722
13760
67477
67523
67523
PL
68727
68727
68727
68727
68727
68727
68727
68727
68727
68727
68727
HOPPER
Spreader
SPEED-CASTER
SPEED-CASTER 2
Serial #'s
115297 – Higher
202389–202649
202650 – Higher
OM
9511
13722
Hopper PL
68723
68757
Drive PL
68725
68758
94415
II
13763
Electrical
PL
68723
13763
13763
68757
94416 94418 94416
Low-Profi le Spreaders
MOUNT
Model #
110, 1000, 2000
HOPPER
Model #
Model 110
Model 500
Model 1000
Model 2000
Serial #
N/A
Receiver Mount
II PL
94380 94381
Serial #
7192 – Higher
03010130000195331
10001–10002
10003 – Higher
20237–20363
20364 – Higher
0806 – Higher
OM
68661
95363
68661
94431
68661
94431
96073
II
Fixed Mount
PL
94433 68518
Hopper PL
68663
95365
Drive PL
68664
68673
68673
68673
68673
96076
68674
68674
68674
68674
96076
SWING AWAY
®
Mount
II PL
94432 68519
Electrical II Electrical PL
13763 68666
13763
13763
95365
68666
13763
13763
13763
13763
94429
68666
94429
Model 2500
MISCELLANEOUS
Literature # (Type)
63689 (II)
63694 (II)
68689 (II)
Description Literature #
CHMSL Relay Kit SPEED-CASTER 95474 (II)
Spreader Harness Repair Kit
SPEED-CASTER
CHMSL Relay Kit (Low Profi le)
Description
Low Profi le Spinner Ring
95607 (II/PL) Low Profi le Model 500 Screen Kit
95640 (II/PL) Model 500/1000 Point of Purchase Display Stand
63694 (II)
68587 (II)
68589 (II)
Spreader Harness Repair Kit (LP) P2178 (II)
Back Stop Kit 94837 (OM)
Truck Protector
Under Tailgate Spreader (UTS)
Top Screen Kit 94839 (II) Under Tailgate Spreader (UTS)
68680 (PL)
Defl ector Kit 94841 (PL) Under Tailgate Spreader Trough
95582 (II)
94518 (II)
Defl ector Kit – Model 500
Speed Control w/Adapter
94843 (PL) Under Tailgate Spreader Spinner
94844 (PL) Under Tailgate Spreader Mount
Lit. No. 29032, Rev. 04 8 July 1, 2009
LITERATURE
Homesteader™ Personal Plow Literature
Description
Off-Truck Components/Plow Gear (27550)
PL
27551
II
27554
OI
6'-8" Blade
7'-4" Blade
Shoe Kit
Hydraulics/DA Ram Assy & Scrape Lock Adj
Fish-Stik
®
Hand-Held Control
Solenoid Joystick
Headlamp Aiming
Headlamps
Isolation Module (4-Port)
Isolation Module (3-Port)
Splash Shield Replacement Kit (24 x 18)
27563
27563
27565
13715
6368
27767
28562
29207
27794
28268
28033
27812
27815
27769
28561
29206
27814
27817
64685 Splash Shield Replacement Kit (32 x 24)
Owner's Manual
Warranty (1 Year – Personal Plow)
Warranty (2 Years)
MOUNT KITS
Dodge 33903
Dodge 33913
Dodge 33923
Ford 1203
Ford 1213
Ford 1213-1
Ford 1223
Ford 1233
Ford 31243
Ford 31253
GM 1503
GM 1523
GM 1533
GM 1533-1
GM 31543
GM 31543-1
GM 31553
Jeep 3713
Jeep 3713-1
Jeep 3713-2
Jeep 3723
Jeep 42113
Jeep 42021
Jeep 42113
Nissan 31303
Nissan 31313
Toyota 2303
Toyota 2313
Toyota 32323
Toyota 32333
28048
28431
48431
64609
29722
29231
29722
64646
29317
28058
28265
28864
29580
40925
27652
28026
64415
27262
28363
48363
29413
27587
29347
40943
27647
28009
27057
27424
28477
29393
28047
28429
48429
64608
29721
29230
29721
64645
29316
28057
28264
28865
29581
40926
27651
28025
64414
27263
28362
48362
29412
27586
29346
40942
27646
28008
27056
27423
28476
29392
Lit. No. 29032, Rev. 04 9
OM Warranty
27567
27569
6416 / 6417
July 1, 2009
LITERATURE
IM Elec. System
28800, 28801, 28802 (New H13
Headlamps)
28806 H13 Bulb Handling
29033 H13 Adapter Kit
3-Port Module – All Parts
4-Port Module – All but 26640
26640 (Ford, International, MC)
26500-1 (Central Hydraulics)
26705-1 On-Truck Wiring Kit
8435 (Old-Style Headlamps)
Hydraulics
9825-1
9840-2
9835-1
9825-1, 9835, 9840-2
9825-2
9828-4
9828-3
9828-2
22147-1, 22150-1
26497 (IA w/Relay System)
8225, 8240, 8425 (MM Only)
8428 (MM Only)
Flushing Procedure
26499
29266 –
27767 26411
PL II
26199
21993
28442
26527
26151
**
**
27816
21842
–
**
26468 26469
–
–
27190
26496
20751
21812 20996
– 26404
PL II
–
–
28810
29207
28562
28814
29034
29206 &
29225
28561 &
44780
26645
8292 Joystick
Controls PL II OI
6368 27815 27817
9400 Fish-Stik
®
13715 27812 27814
9700 EZ-V
®
Hand-Held (6 Button) –
96444 96445 9800, 29600, 29800 EZ-V, XLS™ &
XtremeV™ Hand-Held (9 Button)
9900, 29700, 49900 EZ-V, XLS &
XtremeV Joystick
96446
96357 96355
Repair Instructions for Controls with
PC Board
49700 HT Series™ Joystick
– – 96455
48506
48503 48504
49800 HT Series Hand-Held
3-Port IM Adapters
48505 48506
II OI
26641-1 HB-5 to 1A/2A 29209 –
27968-1 (2B to 2E)
28027-2 (In-Line)
28860-1 HB-5 to HB-2 (Mitsubishi FG)
29056-1 (Lights to Relay)
29226
29547
29210
29515
29234 & 29235 (Ford) 29236
29399, 29400 & 29400-1 2-pin (HB-3) to H11 29456
29033 H13 29034
Tools
26470-2 Isolation Module Tester
29290-1 Diagnostic Harness Kit
–
–
–
–
–
–
–
OI
26473
29289
Description
Back-up/O-Ring Kit (Relief, quill, PO Check
Valve – EZ-V Blade)
EZ-V Hydraulic Parts
Inlet Filter/Filter Kit (Insta-Act ® )
O-Ring/Back-up Ring Kit
Valve Manifold Assy. Instructions
Control (Plow) – Parts
Central Hydraulics – E-Force Lighting
Dodge Plug-in Harness ('99–'01) Original MM
Lighting (2 Light Non-DRL)
4-Port Isolation Module System
GM Plug-in Harness ('99–'02) Original MM
Lighting (Dedicated DRL)
Plow Light Repair (Original MM)
Tecumseh Engine Kit Installation Instructions
Literature Number
66851
26527
66762
28521
66782
96446
26499
26017
28561
26116
26363
94493
Part Number
66781
9828-X
66763
7632K-2
None
9700, 9800, 9900,
29600, 29700, 29800
26500-1
26014
Multiple
26070
8328
Lit. No. 29032, Rev. 04 10 July 1, 2009
BLADES & ATTACHMENTS
NOTE: This index is not current and appears as it did in a 1997 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 11 July 1, 2009
BLADES & ATTACHMENTS
NOTE: This index is not current and appears as it did in a 1997 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 12 July 1, 2009
BLADES & ATTACHMENTS
MC Series Part Identifi cation
Shown below are the A-frames, angle frames and blades produced for the Minute Mount ® and Minute Mount
System MC Series. The components separated by horizontal lines are not compatible with each other.
® 2
HEADGEAR A-FRAME ANGLE FRAME BLADE
22350 & 21000
(Before Sept. '01)
8446-1
3/8" thick spring anchor plate
I-Beam
3/4" diameter clevis pins (measured at cotter pin end)
S Y S T E M
®
20702
20703-1
I-Beam
Square
27255
2-piece base angle on 10'
No notches in pivot plates
1/2" thick spring anchor plate
27250 & 27350
(Between Sept. '01
& Dec. '04)
S Y S T E M
®
27237
20703-1
Square
S Y S T E M
®
27850
Tubular
27255-1
Tubular
28288
1" diameter clevis pins (measured at cotter pin end)
1-piece base angle on 10'
Notches in pivot plates
S Y S T E M
®
Tubular
28665
1/2" thick spring anchor plate
29250 & 29350
(After Dec. '04)
1" diameter clevis pins (measured at cotter pin end)
28639
27850
Lit. No. 29032, Rev. 04
Tubular
13
1-piece base angle on 10'
No notches in pivot plates
July 1, 2009
BLADES & ATTACHMENTS
Blade Attachment Charts – Minute Mount
®
System
22240 RD/HD Headgear Kit
29-1/8"
1999–'02 All New GM 3/4 Ton Trucks
2001–'02 All New GM 1 Ton Trucks
L Blade
22-1/2" cc
33-3/4" hh
22168 A-Frame
3-5/8"
Angle Frame
8' HD L Blade
7658
8-1/2' HD L Blade
28850
9' HD L Blade
7659
8445 Headgear Assembly
29-1/8"
8440-1 Common Attachment Kit
29-1/8"
25-1/4" cc
20703-1
A-Frame
35" hh
8446
A-Frame Kit
24-1/2"
21484-1 Push Assembly
(Part of 8440)
Outside to Outside
24-1/2"
21874-3
A-Frame
(Part of 21442 or 26596)
33-3/8"
26634 Blade Stop Kit
20702
Angle Frame
9' MC Blade
22350
Lit. No. 29032, Rev. 04
10' MC Blade
21000
14
8-1/2' EZ-V ® Blade
21442
9-1/2' EZ-V Blade
26596 cc = center-to-center measurement hh = hole-to-hole measurement
July 1, 2009
22230 Headgear Kit
25" cc
BLADES & ATTACHMENTS
Blade Attachment Charts – Minute Mount
®
System
22135 Headgear Kit
29-1/8" cc
22135 Headgear Kit
29-1/8" cc
1999–20_ Jeep
Wrangler
27" hh
19-1/4" cc
22169
A-Frame
6-9/16"
27" hh
22-1/2" cc
22175
A-Frame
6-9/16"
27" hh
22-1/2" cc
22175
A-Frame
6-9/16"
6'-9" LD Blade
22069
22240 RD/HD Headgear Kit
29-1/8" cc
22-1/2" cc
8562
A-Frame
31-1/2" hh
3"
7-1/2' LD Blade
22075
22250 HD Headgear
29-1/8" cc
6'-9" LD Blade
22069
L Blade
25-1/8" cc
36" hh
8627
A-Frame
3-5/8"
Angle Frame
7' RD L Blade
7761
7-1/2' RD L Blade
7657
8' HD L Blade
7658
8-1/2' HD L Blade
28850
9' HD L Blade
7659
Lit. No. 29032, Rev. 04 15 cc = center-to-center measurement hh = hole-to-hole measurement
July 1, 2009
BLADES & ATTACHMENTS
and M Blade
Blade Attachment Charts –
Minute Mount
®
and Minute Mount
®
2 Systems with L Blade
Minute Mount System
22240 RD/HD
Headgear Kit
(GMC/Chevy w/ 8–9 ft blade)
29-1/8" cc
Minute Mount 2 System with L Blade
22250 HD Headgear
29-1/8" cc
27454
Headgear
29-1/8" cc
25-1/8" cc
25-1/8" cc
31-1/4" hh
22-1/2" cc
33-3/4" hh
27597
A-Frame*
27598
A-Frame*
27150 A-Frame
3"
33-7/8" hh
28000
8' M Blade
28500
8-1/2' M Blade
7-1/2' L Blade
7657
29000
9' M Blade
27500
7-1/2' M Blade cc = center-to-center measurement hh = hole-to-hole measurement
* To replace a conventional-system blade, use an M blade with the A-frame that matches the width between the conventional A-frame's pushears.
Conventional Pushbeam Identifi cation
Width
Spread
Part
1510
1511
1513
4243**
5098
5165**
5326
5417**
5605
Width (in)
27
28-3/4
27
23-3/4
25-1/4
40-1/4
26-1/2
29-5/8
31-1/8
Spread (in)
** This part is no longer available.
22-1/2
22-1/2
25-1/2
22-1/2
19-1/4
30
19-1/4
19-1/4
25-1/2
Weight (lb)
25
26
33
24
16
58
17
18
36
Lit. No. 29032, Rev. 04 16
Part
5654**
5697**
5702**
5952
5993
6013**
5189**
5234**
Width (in) Spread (in) Weight (lb)
31 25-1/2 43
26-7/8 25-1/2 35
33
32-1/4
27
25-1/2
25-1/2
19-1/4
23
37
18
24 25
35
36-1/2
22-1/2
30
30
July 1, 2009
BLADES & ATTACHMENTS
Blade Attachment Charts – Minute Mount
®
2 System
Minute Mount 2 System with M Blade and XBLADE™ Snowplows
27454
Headgear
28500
8-1/2'
28000
8'
M Blade
27777/28900*
Common
Attachment Kit
33-3/4"
hh
25-1/8" cc
27598
A-Frame
29-1/8" cc
2Q7
27500
7-1/2'
29000
9'
29100 (SS)/29200 (MS)**/29619 (Poly)
9'
28100 (SS)/28200 (MS)**
29618(Poly)
8'
XBLADE
Minute Mount 2 System with EZ-V
®
Blade
28510 (SS)/28520 (MS)**
8-1/2'
27454
Headgear
28888
Common
Attachment Kit
27510 (SS)/27512 (MS)**
7-1/2'
29-1/8" cc
28885
8-1/2'
Lit. No. 29032, Rev. 04
27400 A-Frame
(Packed with blade)
28895
9-1/2'
27345
Push Assembly
2Q8
17
26634
Blade Stop Kit
(9-1/2' only) cc = center-to-center measurement hh = hole-to-hole measurement
* The 28900 Common Attachment Kit
includes a silver lift arm.
** No longer available.
July 1, 2009
BLADES & ATTACHMENTS
Blade Attachment Charts –
Minute Mount
®
2, Homesteader™ and HT Series™ Systems
Minute Mount 2 System with LD/SD Blade
(new)
27775*
7-1/2'
27750-1
Common
Attachment Kit
27742
Headgear
32" hh
25-1/2" cc
29-1/8" cc
27995-1
A-Frame
(old)
28069*
6'-9"
22075
7-1/2'
22069
6'-9"
Homesteader Personal Plow
27550
Plow Gear
Kit
27138
A-Frame
27112
Quadrant
27126
Plow Gear Frame
27547
6'-8"
69400
7'-6"
HT Series Snowplow
69518
Headgear
29-1/8" cc
69523
A-Frame
27549
7'-4"
Lit. No. 29032, Rev. 04 18 cc = center-to-center measurement hh = hole-to-hole measurement
* In some applications, be careful to
avoid hitting the lift arm with the blade.
July 1, 2009
BLADES & ATTACHMENTS
Blade Attachment Charts – Minute Mount
®
2 System
Minute Mount 2 System with MC Blade
29999
Common
Attachment Kit
26160
Headgear
29-1/8" cc
28665
A-Frame
Kit
25-1/4" cc
35.4" hh
28639
Angle Frame
27850
A-Frame
2Q9
29350
10'
29250
9'
Minute Mount 2 System with XtremeV™ Blade
44675-1 (MS)/
44775-1 (SS)
7-1/2'
44558
Headgear
(Frame Only)
44556-1
Push Assembly
44555-1
T-Frame
Minute Mount 2 System with XLS™ Blade
26757-1
Lift Arm Kit
(Yellow)
44558
Headgear
(Frame Only)
29-1/8" cc
44685-1 (MS)/
44785-1 (SS)
8-1/2'
26757-1 (Yellow)
27560-1 (Silver)
Lift Arm Kit
29-1/8" cc
50669
A-Frame
44695-1 (MS)/
44795-1 (SS)
9-1/2'
50666
8'–10' cc = center-to-center measurement hh = hole-to-hole measurement
Lit. No. 29032, Rev. 04 19 July 1, 2009
BLADES & ATTACHMENTS
Replacement Part Numbers for Weld on Shoe Tube Holders
No Longer Manufactured
Model
6-1/2 ft – 7 ft HS Series #A5090, #A5437 (Last Sold 4/98)
6 ft 9 in – 7-1/2 ft LD Series #28069, #27775
6 ft 9 in – 7-1/2 ft LD Series #22069, #22075
6-1/2 ft RD Series L Blade #7760 (Last Sold 6/94)
6-1/2 ft RD Series G Blade #A5569 (Last Sold 1/89)
7-1/2 ft – 8 ft RD/HD Series Patriots
®
M Blade #27500P, #28000P
7 ft – 9 ft RD/HD Series L Blade #7761, #7657, #7658, #28850, #7659 (Last Sold 4/01)
7 ft – 7-1/2 ft RD Series G/H Blade #A5570, #A5563 (Last Sold 1/92)
8 ft – 9 ft HD Series H Blade #A5564, #A5565 (Last Sold 1/92)
8-1/2 ft – 9-1/2 ft EZ-V
®
Series (1 Piece Center Flap) #28885, #28895
8-1/2 ft – 9-1/2 ft EZ-V Series (2 Piece Center Flap) #28885, #28895
8-1/2 ft – 9-1/2 ft EZ-V Series #21442, #26596 (Last Sold 8/03)
9 ft – 10 ft MC Series – #27250, #27350 (Last Sold 4/05)
9 ft – 10 ft MC Series – #22350, #21000 (Last Sold 10/01)
10 ft HC Series #A5134 (Last Sold 1/98)
Currently Manufactured
6 ft 9 in – 7-1/2 ft SD Series #28069, #27775
7-1/2 ft – 9 ft RD/HD Series M Blade #27500, #28000, #28500, #29000
7-1/2 ft – 9 ft X BLADE™ Series (-1 version)
7-1/2 ft – 9 ft X BLADE Series
8 ft – 10 ft XLS™ Series Blade #50810PL
9 ft – 10 ft MC Series #29250, #29350
Shoe Tube Holder
Accessory Kit
Accessory Kit
Accessory Kit
PN 27215
PN 27215
PN 26197
PN 27215
PN 27215
PN 27215
PN 20721
PN 20721
PN 20721
9 ft – PN 27254; 10 ft – PN 27184
9 ft – PN 22351; 10 ft – N/A
N/A
Accessory Kit
PN 26197
Accessory Kit
Accessory Kit
Accessory Kit
PN 28648
Lit. No. 29032, Rev. 04 20 July 1, 2009
BLADES & ATTACHMENTS
Base Angle Identifi cation – "L" Blade and "M" Blade
The base angle ears (provide half of the hinge of the trip-edge) for the L and M series blades are located fl ush with the rear edge of the base angle. That distinguishes them from the G and H series blades which have the base angle ears located approximately 9/16" in from the rear edge of the base angle.
The number of hinges depends upon the series and length of the blades. That number is the same as the number of full ribs.
Blade Length/Series Number of Ribs
L Blade
7-1/2' L Blade
8' L Blade
8-1/2' L Blade
9' L Blade
M Blade
7-1/2' M Blade (Early Production)
7-1/2' M Blade (Current Production)
8' M Blade
8-1/2' M Blade
9' M Blade
5 Full Ribs
6 Full Ribs
8 Full Ribs
8 Full Ribs
6 Full Ribs and 2 Partial Ribs
8 Full Ribs
8 Full Ribs
8 Full Ribs
8 Full Ribs
The base angles for the 8-1/2' and 9' lengths of the L and M series blades might be confused. All have 8 full ribs and therefore 8 hinges. The center-to-center measurements between the ribs for the M series of blades are as follows:
Blade Length/Series A B C D E F G
8-1/2' M Blade 14-1/2" 21" 9-1/4" 10-1/4" 9-1/4" 21" 14-1/2"
9' M Blade 14-1/2" 24" 9" 10-1/4" 9" 24" 14-1/2"
A
B
C
D
E
F
Base angles of 8-1/2' and 9' lengths with different spacing than shown above and with the base angle ears located fl ush with the rear edge of the base angle would be for L series blades.
Lit. No. 29032, Rev. 04 21
G
July 1, 2009
BLADES & ATTACHMENTS
Minute Mount
®
/Minute Mount 2 RD/HD M Blade A-Frame Identifi cation
In 2002, the A-frames for the Minute Mount and Minute Mount 2 RD/HD Series were revised, extending their lengths by 3", moving the lift chain attachment point and changing the gusset at the tip of the A-frame. When replacing an old-style A-frame, be sure to use the A-frame directly to the right of it in the illustration below.
HEADGEAR OLD-STYLE A-FRAME** NEW-STYLE A-FRAME
22475 (Weldment)
26090 (A-Frame Kit)
27507 (Weldment)**
27597 (A-Frame Kit)
Flat
Gusset
Cross Brace
Bent Gusset
Notched
No Cross Brace
Notched
S Y S T E M
®
High Hole
Location
Low Hole
Location
22-1/2" ± 1/8"
Center to Center
Ear
Indented
22-1/2" ± 1/8"
Center to Center
26109 (Weldment)
27000 (Packed in Headgear Kit – MM2 only)
26410 (A-Frame Kit)
27598 (A-Frame Kit*)
Ear
Indented
S Y S T E M
®
Flat Gusset
Cross Brace
*Notched
Bent Gusset
No Cross Brace
*Notched
25-1/2" ± 1/8"
Center to Center
Ear Not
Indented
27032 (Weldment)
27000 (Packed in Headgear Kit)
Flat Gusset
Cross Brace
Not Notched
Low Hole
Location
High Hole
Location
25-1/2" ± 1/8"
Center to Center
Ear Not
Indented
27477 (Weldment)
27777 (Packed in Headgear Kit)
27598 (A-Frame Kit)
Bent Gusset
No Cross Brace
Not Notched
Low Hole
Location
High Hole
Location
25-1/2" ± 1/8"
Center to Center
Ear Not
Indented
25-1/2" ± 1/8"
Center to Center
Ear Not
Indented
* The 27598 A-frame kit has been changed and now contains the 27477 A-frame (MM2 only). For original Minute Mount applications, the A-frame must be notched.
** No longer available.
Lit. No. 29032, Rev. 04 22 July 1, 2009
BLADES & ATTACHMENTS
NOTE: This index is not current and appears as it did in a 1995 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 23 July 1, 2009
BLADES & ATTACHMENTS
PECULIAR AND COMMON ATTACHMENT KIT INDEX – CONVENTIONAL MOUNT PLOWS
YEAR
FORD
VEHICLE
1987–91
1992–95
1992
1992–95
1992–95
1992–95
DODGE
1972–88,
1992–93
1974–93
1972–90
W150 (5)
Ramcharger (5)
W250 (5)
W350 (5)
1991–93 W250 (5)
W350 (5)
FOREIGN COMPACT/JEEP
1987–95 Wrangler
1985–95
1985–92
Cherokee
Comanche
F-150 (4)
Bronco (4)
F-250 (6) (4)
F-350 (4)
F-350 2WD (6) (4)
F-Super Duty 2WD
F-150 (4) (10)
Bronco (4)
F-250 (4) (6) (7)
F-350 (4)
F-Super Duty 2WD
BLADE SIZE
7' – 7761
7 1/2' – 7657
7 1/2' – 7657
8' – 7658
8' – 7658
9' – 7659
8' – 7658
9' – 7659
9' – 7659
7' – 7761
7 1/2' – 7657
7 1/2' – 7657
8' – 7658
8' – 7658
9' – 7659
8' – 7658
9' – 7659
7' – 7761
7 1/2' – 7657
7 1/2' – 7657
8' – 7658
9' – 7659
7 1/2' – 7657
8' – 7658
9' – 7659
6 1/2' – A5090
7' – A5437
6 1/2' – A5090
7' – A5437
BLADE TYPE
"L"
"L"
"L"
"HS"
"HS"
"L"
"L"
"L"
"L"
"L"
"L"
"L"
"L"
"L"
A4979B
A4981B
A4980B
A4980B
A4981B
A4980B
A4980B
A5091
A5091B
COMMON
ATTACH KIT
A4979B
A4981B
A4980B
A4980B
A4980B
A4980B
A4980B
A4979B
A4981B
A4980B
A4980B
A4980B
PECULIAR
ATTACH KIT
AR275C
AL286B
AL287C
AL292B
AL296B
7113B
7114B
7115B
7118B
7116B
AL257D
7117B
7101
AM265D
FISHER ENGINEERING, ROCKLAND, MAINE 04841 SUBJECT TO CHANGE 05/05/95
NOTE: This index is not current and appears as it did in a 1995 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 24 July 1, 2009
BLADES & ATTACHMENTS
PECULIAR AND COMMON ATTACHMENT KIT INDEX – CONVENTIONAL MOUNT PLOWS
YEAR VEHICLE BLADE SIZE BLADE TYPE COMMON
ATTACH KIT
COMMERCIAL
1990–95
1980–94
1989–94
1989–95
CHEV Kodiak, GMC Topkick w-w/o Tilt Hood
FORD F-600, F-700 w-w/o Tilt Hood
IHC 4600 (1)
IHC 4700 (1) (9) w-w/o Tilt Hood
10' – A5134
10' – A5134
10' – A5134
"HC"
"HC"
"HC"
6955
6955
6955
1995
FORD F-700, F-800 w-w/o Tilt Hood (8)
10' – A5134 "HC" 6955
(1) Also requires use of (2) part number 7375 – 144" control cables which are sold as service parts only!
(2) Recommended with RPO VYU snowplow prep package
(4) Recommended with optional heavy duty front suspension package only – (F-150 3800 lb, F-250 4600 lb.
F-350 4800 lb, F-350 4 X 2 4000 lb)
(5) Recommended with snowplow prep package (AHH/AHD) only.
(6) Not for use on trucks with diesel engines.
(7) Requires removal of sway-bar if equipped.
(8) with 7000# Front GAWR.
(9) maximum 10,000# FGAWR.
(10) not for use on trucks with Quad shocks.
PECULIAR
ATTACH KIT
7105C
7102
7140 (1)
7136
FISHER ENGINEERING, ROCKLAND, MAINE 04841 SUBJECT TO CHANGE 05/05/95
NOTE: This index is not current and appears as it did in a 1995 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 25 July 1, 2009
BLADES & ATTACHMENTS
Cutting Edge/Cutting Edge Bolt Bag Identifi cation
50678
(50625)
28408
(28406)
26593
(26592)
27362
(27359)
3507
(7082)
27239
(27238)
27590
(27427)
44740-1
(44881)
44742-1
(44882)
44741-1
(44883)
44743-1
(44884)
44744-1
(44886)
Fisher PN
(# on C.E.) Description
5094
(6196)
5485
(6197)
27713
(27713)
27714
(27159)
22215
(22152)
22216
(22193)
5532
(6597)
5533
(6598)
26460
(26652)
5534
(6599)
28575
(28545)
27580
(27426)
6-1/2' HS
7' HS
6'-8" Homesteader™
Personal Plow
7'-4" Homesteader
Personal Plow
6'-9" LD/SD
7-1/2' LD/SD
7-1/2' H, L, M
(RD/HD/HT Series™)
8' H, L, M (HD)
8-1/2' M (HD)
9' H, L, M (HD)
7-1/2' XBLADE™
Snowplow
8' XBLADE Snowplow
27585
(28391)
8-1/2' XBLADE
Snowplow
Material
1" x 5" x
6-1/2' Poly
1" x 5" x 7' Poly
9' XBLADE Snowplow
7-1/2' XtremeV™
Snowplow
7-1/2' XtremeV
Snowplow
8-1/2' XtremeV
Snowplow
8-1/2' XtremeV
Snowplow
9-1/2' XtremeV
Snowplow
7-1/2' HD/HT Series
8'-10" XLS™ Snowplow
8-1/2' EZ-V
9-1/2' EZ-V Snowplow
9' MC
10' HC
®
Snowplow
10' MC (2 pieces)
1/2" x 6" x 9'
Steel Reversible
(2) 3/8" x 6" x
37-3/4" Steel
(2) 1/2" x 6" x
37-3/4" Steel
(2) 3/8" x 6" x
40-3/4" Steel
(2) 1/2" x 6" x
40-3/4" Steel
(2) 1/2" x 6" x
46-3/4" Steel
1/2" x 6" x 7-1/2'
Steel
1/2" x 6" x
49-3/4" Steel
1/2" x 6" x
55-3/4" Steel
1/2" x 8" x 9'
Steel
1/2" x 6" x 10'
Steel
1/2" x 8" x
59-3/4" Steel
1/4" x 5" x 6'-8"
Steel
1/4" x 5" x 7'-4"
Steel
1" x 6" x 6' 9"
Poly
1" x 6" x 7-1/2'
Poly
3/8" x 6" x 7-1/2'
Steel
1/2" x 6" x 8'
Steel
1/2" x 6" x 8-1/2'
Steel
1/2" x 6" x 9'
Steel
1/2" x 6" x 7-1/2'
Steel Reversible
1/2" x 6" x 8'
Steel Reversible
1/2" x 6" x 8-1/2'
Steel Reversible
# of
Holes
9
11
7
7
8
8
8
8
8
11
10
10
10
11
(2) 5
(2) 5
(2) 5
(2) 5
(2) 5
8
(2) 5
(2) 5
11
12
(2) 5
Punched
Top/
Center
Top
Top
Top
Top
Top
Top
Top
Top
Top
Top
Center
Center
Center
Center
Bolt Pattern from Edge
1", 10-1/2", 20", 29-1/2", 39", 48-1/2",
58", 67-1/2", 77"
1", 4", 13-1/2", 23", 32-1/2" 42",
51-1/2", 61", 70-1/2" 80" 83"
2-1/4", 15-1/4", 28", 40", 51-7/8",
64-3/4", 77-3/4"
2-1/4", 16-3/4", 32", 44", 55-7/8",
71-1/4", 85-3/4"
1-1/2", 9-3/8", 21-7/8", 34-1/4",
46-3/4", 59", 71-1/2", 79-1/2"
1-1/2", 13-7/8", 26-3/8", 38-3/4",
51-1/4", 63-5/8", 76", 88-1/2"
1-1/2", 14", 26-3/8", 38-7/8", 51-1/4",
63-1/2", 76", 88-1/2"
4-1/2", 17", 29-3/8", 41-3/4", 54-1/4",
66-3/4", 79", 91-1/2"
2-1/2", 18-1/2", 31-1/2", 44-1/2",
57-1/2", 70-1/2", 83-1/2", 99-1/2"
3", 6", 18" 30", 42", 54", 66", 78",
90", 102" 105"
1-1/2", 4-1/2", 26-3/4", 38-3/4",
51-1/4", 63-3/4", 76", 85-1/2", 88-1/2"
1-1/2", 4-1/2", 17", 29-3/8", 41-3/4",
54-1/4", 66-3/4", 79", 91-1/2", 94-1/2"
2-1/2", 5-1/2", 18-1/2", 31-1/2",
44-1/2", 57-1/2", 70-1/2", 83-1/2",
96-1/2", 99-1/2"
3", 6",18", 30", 42", 54", 66", 78",
90", 102", 105"
Top
Top
Top
Top
Top
Top
Top
Top
Center
Top
Center
3-3/4", 6-3/4", 18-1/2", 25-1/4", 33"
3-3/4", 6-3/4", 18-1/2", 25-1/4", 33"
3-3/4", 6-3/4", 20-1/2", 29-3/8", 39"
3-3/4", 6-3/4", 20-1/2", 29-3/8", 39"
3-3/4", 6-3/4", 23-1/2", 32-1/2", 45"
1-1/2", 13-3/4", 26-3/8", 38-3/4", 51",
63-1/2", 76", 88-1/2"
2", 16", 30-1/4", 44-1/4", 47"
2", 8", 22", 36-1/4", 50-1/4", 53"
1-3/4", 4-3/4", 11-3/4", 23-3/4", 39",
54", 69", 84", 96", 103", 106"
3", 6", 18", 30", 42", 54", 66", 78",
90", 102", 114", 117"
2", 18", 30", 42", 58"
Bolt
Bag
PN
6602
6603
27574
27574
6600
6600
6600
6601
6601
21610
(2)
26594
(2)
Bolt Size &
Qty
7/16-14 x 2 (9)
7/16-14 x 2
(11)
3/8-16 x 1 1/2
(7)
3/8-16 x 1 1/2
(7)
22217
1/2-13 x 2 (8)
22217
1/2-13 x 2 (8)
1/2-13 x 2 (8)
1/2-13 x 2 (8)
1/2-13 x 2 (8)
5/8-11 x 2 (11)
20763
5/8-11 x 2 (10)
20763
5/8-11 x 2 (10)
20763
5/8-11 x 2 (10)
Part # 44894 Center
Cutting Edge Kit w/
Fasteners
5/8-11 x 2 (14)
6600
27363
7084
27236
5/8-11 x 2 (11)
1/2-13 x 2 (8)
1/2-13 x 2 (5)
1/2-13 x 2 (6)
3/4-10 x 2 (11)
5/8-11 x 2 (12)
3/4-10 x 2 (10)
Lit. No. 29032, Rev. 04 26 July 1, 2009
ELECTRICAL COMPONENTS
4-Port to 3-Port Isolation Module Plug-In Harness Kit Cross Reference
Headlamp or Vehicle Type
HB-1 or HB-5 Headlamps
HB-3 & HB-4 Headlamps
2B or 2D or HB2 Headlamps
HB-1 & HB-5 Headlamps
Dodge Sport Package
H13 Headlamps
Mitsubishi FG
GM Topkick/Kodiak
GM C4500/5500
International
Ford F-650/700/800
4-Port Harness Kit
(module included)
8436
8437-1
8438
27480
27780
28028
8439
8442
28400
8436 w/26641 or 28860 Adapter
8443
27890
8439 w/26640 Adapter
8439 w/26640 Adapter
3-Port Harness Kit
(module not included)
29050
29048 w/28027-2 Adapter if both high
and low beams on vehicle are
ON in high-beam mode.
29052
29051
29050 w/29056-1 Adapter
29049
29050 w/26641-1 or 28860-1 Adapter
29054
29053
29053 w/29234 Adapter
29053 w/29235 Adapter
Additional Electrical System Compatibility Notes
1. Revisions to adapter kits 28027(-2), 26641(-1) and 28860(-1) are strictly due to modifi cations to the installation instructions. No changes were made to the actual adapters.
2. The 3- and 4-Port Isolation Modules are not interchangeable.
3. The 3- and 4-Port Isolation Module Plug-In Harness Kits are not interchangeable.
4. The 2- and 3-Plug System Vehicle and Snowplow Battery Cables are not interchangeable. The
21924 snowplow battery cable and 63411 vehicle battery cable cannot be used on a new 2-Plug System
(e.g., XtremeV™ or XLS™ Snowplow).
5. To use an existing 4-Port Isolation Module System with an XtremeV or XLS Snowplow, adapter 29175 is required.
6. Homesteader™ Personal Plows will continue to use 8435 headlamps, which are compatible with either 3- or
4-Port Isolation Module Systems.
7. The 3-Port Isolation Modules—Green Label DRL (PN 29070* or 29070-1), White Label Non-DRL (PN
29060*) and Blue Label DRL (PN 29760-1**)—are packaged separately; both a plug-in harness kit and a module must be purchased for a full installation.
* No longer available; Replaced by PN 29070-1.
** 2008 Ford Super Duty only.
NOTE: This list is to be used as a ordering guide and reference only. It is not a complete list of recommended snowplow applications and should not take the place of the Kit Selection Guide/eMatch.
Lit. No. 29032, Rev. 04 27 July 1, 2009
ELECTRICAL COMPONENTS
Isolation Module System Connector Identifi cation and Wiring
6
5
4
Straight Blade Control Connectors
Control Side
(end view)
(pins)
3
2
1
Pin No.
Wire Color
1 White
2
3
Green
Brown
4
5
6
Black
Blue
Red
3
2
1
Vehicle Side
(end view)
6
5
4
(sockets)
Pin No.
Wire Color
1 Red/Yellow
2
3
Light Green
Orange/Black
4
5
6
Brown/Red
Light Blue
White/Yellow
Function
+12V Feed
Valve S2
Ground
+12V Switched to Motor Relay
Valve S3
Valve S1
EZ-V
®
Control Connector
7
3
11
14
1
4
12
8
(Front View)
Pin No.
1
2
3
6
7
4
5
8
9
10
Wire Color
Light Blue w/Orange Stripe
Blue w/Orange Stripe
Black w/White Stripe
Light Green
Light Blue
White w/Yellow Stripe
Brown w/Red Stripe
Red w/Yellow Stripe
Black w/Orange Stripe
Brown w/Green Stripe
Snowplow Control Harnesses (3- and 7-Pin)
Function
Valve S6
Valve S5
Valve S4
Valve S3
Valve S2
Valve S1
Neg. Switched to Motor Relay
+12V Feed
Ground
+12V to Motor Relay
Plow (End View)
1 2 3 4 5 6
7 8 9 10 11
(Sockets)
= both 3- and 7-Pin
= 7-Pin only
= not used
Pin No.
Wire Color
4
6
8
1
3
9
10
Black/White
Light Blue
Light Green
Red
Blue/Orange
White/Yellow
Lt Blue/Orange
3-Pin
N/A
Valve S3
Function
7-Pin
Valve S4
Valve S2
Valve S2
N/A
N/A
Valve S1
N/A
Valve S3
+12V Feed
Valve S5
Valve S1
Valve S6
Snowplow Lighting Harness (11-Pin)
Plow (End View)
7 8 9 10 11
Pin No.
Wire Color
1 Black/White
Function
PS Low Beam
2
3
4
5
6
Black/Orange
White/Yellow
White
Blue/Orange
Black
Ground
PS High Beam
DS High Beam
PS Common
DS Low Beam
Pin No.
Wire Color
7 Black/Orange
8
9
10
11
Gray
Purple
Brown
Light Blue
Function
Ground
Left Directional
Right Directional
Parking Lights
DS Common
1 2 3 4 5 6
(Pins)
Lit. No. 29032, Rev. 04 28 July 1, 2009
ELECTRICAL COMPONENTS
Harness Repair Ends
Repair ends are available for most wiring harnesses. When the end of a harness is damaged and must be replaced, using a repair end eliminates the need to replace a complete harness and offers the ability to accomplish a repair at a lower cost. The part numbers of available repair ends are:
Repair End Part
22334K
22335K
22336K
22337K
22338K
Repair End Part
27063K
27067K
Repair End Part
27070
22123
63726
63692
63693
29998
Original Minute Mount
®
Wiring
Description
7-Pin – Snowplow Side
9-Pin – Snowplow Side
9-Pin – Vehicle Side
12-Pin – Snowplow Side
12-Pin – Vehicle Side
E-Force Isolation Module Wiring
Description
3-Pin – Vehicle Control Harness (Straight Blade)
7-Pin – Vehicle Control Harness (EZ-V ® Blade)
Miscellaneous Electrical Kits
Description
6-Pin White Connector – Vehicle Side
Pin Kit – 14-Pin Receptacle (EZ-V Blade)
11-Pin – Vehicle Side (PRO-CASTER™ Spreaders)
4-Pin – Vehicle Side (Tailgate Spreaders)
4-Pin – Spreader Side (Tailgate Spreaders)
Double Fuse Cover – Pkg of 5 (3-Port Peculiar
Harnesses , XtremeV™ and XLS™ Hydraulic Units)
Original Harness Part
8612
8246
8275
8273
8276
Original Harness Part
26345
26346
Original Harness Part
26345
26346
66426
63633
63634
NOTE: Repair ends are not available for the 11-Pin E-Force Isolation Module Vehicle- or Snowplow-Side
Lighting Harnesses.
NOTE: The wire colors of the PRO-CASTER 11-Pin Repair End will not match those used for the 11-Pin vehicle-side light harness.
Original Minute Mount
®
Wiring to Isolation Module System Cross Reference
NOTE: The following information applies only to Original Minute Mount Wiring and 3-Plug Isolation
Module Electrical Systems. The information does not apply to the new 2-Plug Multiplex Module Electrical
System (e.g., XtremeV, XLS and HT Series™ Snowplows).
The E-Force Isolation Module Electrical System should be used with all new installations; however, when swapping an existing snowplow from one truck to another, it may be possible to use the Original Minute
Mount 2-Plug Wiring System. See the chart below to determine which trucks can use this system:
Vehicles
All Chevrolet/GMC
App. Years
Compatible w/Orig.
MM Wiring
2002 & Prior
All Ford 2004 & Prior
Dodge 1500
Dodge 2500/3500
Jeep Wrangler
2001 & Prior
2002 & Prior
2004 & Prior
Lit. No. 29032, Rev. 04 29 July 1, 2009
ELECTRICAL COMPONENTS
Schematic – XtremeV™ or XLS™ Snowplow Without Plow Lights/Isolation Module
Vehicle Cable Assembly – PN 42014
RED
BLK
– +
Battery
Control
D D
C C
B
A
B
A
BLK
RED
RED
BLK
TWO CONDUCTOR, TWISTED PAIR, SHIELDED
Vehicle Control Harness
PN 28587
RED
RED
RED
BLK
BLK
1
2
3
4
1
2
3
4
RED
GRN
WHT
BLK
4-Pin Plug
(Under Dash)
To Switched Accessory Lead
Cut off 4-pin plug and hard wire vehicle control harness to relay.
Fuse
10 amp
(add in-line fuse)
Relay – PN 8293
Schematic – Straight Blade & EZ-V
®
Snowplow Without Plow Lights/Isolation Module
Battery
Cable – PN 22511
RED
Battery
Motor
Relay –
PN 5794K-1
Plow Battery
Cable – PN 21294
Vehicle Battery Cable – PN 63411
RED
BLK/ORN
Plow Control Harness
(3-Pin) – PN 26359
Vehicle Control Harness (3-Pin) – PN 26345
Red
To
Snowplow
Control
Dust Plug – PN 26420
Fire Wall
15-Amp Fuse (Park/Turn)
7.5-Amp Fuse
(Straight Blade Control)
To Switched
Accessory
Cut off 10-pin connector and hard wire vehicle control harness to relay.
Lit. No. 29032, Rev. 04 30
GROUND
Relay – PN 8239
July 1, 2009
ELECTRICAL COMPONENTS
E-FORCE ISOLATION MODULE SYSTEM
Used with SEHP Hydraulic Unit
REQUIRES:
Plug-in harness kit & module (3-port) – see eMatch for applications
Plow lighting harness
Panel mount
Dust cover
Light kit
2
1
Vehicle control harness
Plow control harness
Motor solenoid
Red cable, 22" battery cable
Vehicle cable assembly
Part Number
26347
26345
26359
5794K-1
22511
63411
56526
26420
8435 or 28800
8291K
8737
Plug cover
Parts bag (includes fuse tops, rubber grommets, etc.)
If you order Harness Kit PN 26431, it includes:
Plow control harness
Vehicle control harness
26359
26345
Vehicle cable assembly
Plug cover
63411
8291
1
Plow light harness required only if older 8416 or 8417 plow lights are used instead of the 8435 or 28800 light kit.
2
Would replace 8416 or 8417 plow lights.
Lit. No. 29032, Rev. 04 31 July 1, 2009
ELECTRICAL COMPONENTS
Plug-In Harness Conversions for LF/UF Headlamps
Although there is no Isolation Module plug-in harness available for LF/UF headlamps, it is still possible to install a new FISHER ® snowplow with the Isolation Module electrical system on vehicles with these headlamps. Note, however, that installation on these vehicles does require modifi cation of the existing vehicle wiring. To install an
Isolation Module system on a vehicle with LF/UF headlamps, cut off and discard the headlamp connectors from the plug-in harness(es) noted in the illustrations below, then splice the wires from the plug-in harness(es) into the vehicle headlamp wiring as shown. Be sure to follow the illustration for the proper Isolation Module (3-Port or
4-Port). For complete Isolation Module installation instructions and recommended splicing procedures, see the
Isolation Module installation instructions.
4-Port Isolation Module
A
B
(Wire Side View)
(Wire Side View)
A B
Low Beam
Connector
(H4703 Bulb)
High Beam
Connector
(H4701 Bulb)
SPLICE
SPLICE
26349/26354 Plug-In Harness
(in 8436 Plug-In Harness Kit)
-or-
26353/26356 Plug-In Harness
(in 8439 Plug-In Harness Kit)
3-Port Isolation Module
A
B
(Wire Side View)
Low Beam
Connector
(H4703 Bulb)
SPLICE
SPLICE
SPLICE
SPLICE
Vehicle Wiring
(Wire Side View)
A B
High Beam
Connector
(H4701 Bulb)
SPLICE
SPLICE
28464 Plug-In Harness
(in 29051 Plug-In Harness Kit)
Now Available: PN B62225-1 Headlamp Adapter Kit H13 to LF/UF
Lit. No. 29032, Rev. 04 32
SPLICE
SPLICE
SPLICE
SPLICE
Vehicle Wiring
July 1, 2009
ELECTRICAL COMPONENTS
Original Minute Mount
®
Electrical System Connector Identifi cation and Wiring
6
5
4
Straight Blade Control Connectors
Control Side
(end view)
(pins)
3
2
1
Pin No.
Wire Color
1 White
2
3
4
Green
Brown
Black
5
6
Blue
Red
3
2
1
Vehicle Side
(end view)
6
5
4
(sockets)
Pin No.
Wire Color
1 Red
2
3
Light Green
Orange/
Black
4 Brown/Red
5
6
Light Blue
White/Yellow
Function
+12V Feed
Valve S2
Ground
+12V Switched to Motor Relay
Valve S3
Valve S1
EZ-V
®
Control Connector
7
3
11
14
1
4
12
8
(Front View)
Pin No.
1
2
3
6
7
4
5
8
9
10
Wire Color
Light Blue w/Orange Stripe
Blue w/Orange Stripe
Black w/White Stripe
Light Green
Light Blue
White w/Yellow Stripe
Brown w/Red Stripe
Red
Black w/Orange Stripe
Brown w/Green Stripe
Snowplow Control Harnesses (7-, 9- and 12-Pin)
Function
Valve S6
Valve S5
Valve S4
Valve S3
Valve S2
Valve S1
Neg. Switched to Motor Relay
+12V Feed
Ground
+12V to Motor Relay
Plow (End View)
1 2 3 4 5 6
7 8 9 10 11 12
(Sockets)
= 7-, 9- and 12-Pin
= 7- and 12-Pin only
= 9- and 12- Pin only
= 12-Pin only
Pin
No.
5
6
7
1
2
3
4
9
10
11
Gray
Purple
Brown
Wire Colors
9-Pin
White/Yellow
Black 1
Light Green
Light Blue
Black/Orange 3,4
White
N/A
12-Pin
White/Yellow
Black
Light Green
Light Blue
Black/Orange 3,4
White
Black/White
Function
8
12
7-Pin
N/A
Black
N/A
N/A
Black/Orange 3
White
N/A
N/A
1
Orange/Black 2
1 DS and PS
2
Main Ground
3
Ground for headlamp relays only
N/A
Gray
Purple
Brown
N/A
Dk Blue/Orange
Gray
Purple
Brown
Lt Blue/Orange
Valve S1
Low Beam 6
Valve S2
Valve S3
Ground
High Beam
DS Low Beam
PS Low Beam
Ground
Left Directional
Right Directional
Parking Lights
Low Beam
Ground
5
4 On early rev. harnesses, black/orange wire is
ground for motor relay, control and headlamp relays
5
DS only on 12-pin harnesses
6 PS only on 12-pin harnesses
Lit. No. 29032, Rev. 04 33 July 1, 2009
ELECTRICAL COMPONENTS
NOTE: This index is not current and appears as it did in a 1997 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 34 July 1, 2009
ELECTRICAL COMPONENTS
NOTE: This index is not current and appears as it did in a 1997 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 35 July 1, 2009
ELECTRICAL COMPONENTS
NOTE: This index is not current and appears as it did in a 1995 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 36 July 1, 2009
ELECTRICAL COMPONENTS
NOTE: This index is not current and appears as it did in a 1995 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 37 July 1, 2009
HYDRAULIC COMPONENTS
NOTE: This index is not current and appears as it did in a 1997 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 38 July 1, 2009
HYDRAULIC COMPONENTS
NOTE: This index is not current and appears as it did in a 1997 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 39 July 1, 2009
HYDRAULIC COMPONENTS
Cartridge Identifi cation Chart
A
Stamped # HydraForce
SF08-2015
SV08-30
SV08-31
SV08-40
SV08-41
SV08-43
SV08-45
SV08-2004
SVCV08-20
Stamped # Deltrol
N/A
N/A
DSV2-080-3-N-C7
DSV2-080-4CO-N-C25
N/A
N/A
N/A
DSV-080-2NCP-N-C66
N/A
Hydraulic Cylinder Identifi cation
LENGTH – EXTENDED
LENGTH – RETRACTED
BARREL LENGTH
90° PORT
B
Fisher Part Number
44335
7636K-1
66608K
7637K
49457
66783K
49453
7634K-1
44331
Dia.
"B"
Dia.
"C"
DA Cylinder
Piston
Diameter
0° PORT
Port
Location
Piston
Dia.
Barrel
Length
Part
Number
Description
With NPTF Port/Packing Nut
Retracted
Length
Extended
Length
Dia.
"A"
A5096
A3463
A3464
A5166K
1-1/2 x 6
2 x 10
2 x 12
2 x 16
13-1/4
17-1/4
19-1/4
23-1/4
20116K
20117K
1-1/2 x 10
1-1/2 x 12
17-3/16
19-1/2
With SAE O-Ring Port/Gland Nut
56600K
1-1/2 x 10 17
56718
56603K
1-1/2 x 6
1-1/2 x 12
13-1/4
19-1/2
19-1/4
27-1/4
31-1/4
39-1/4
26-7/8
31-1/4
56740
56709F
44340
49461
2 x 10
2 x 10 DA
1-3/4 x 11 DA
1-1/2 x 10
17
17-1/4
18-1/4
17
B60347
XLS™ Wing Cyl 29-9/16
56772K
1 x 7 13-1/2
27
19-1/4
31-1/2
27
27-1/4
29-1/4
27
40-1/2
20-1/2
27204
69668
1-1/2 x 6 DA
2 x 6-3/4 DA
13
12.96
19-3/16
19.71
1
1
69670
1-1/2 x 8 16.68
24.83
1-1/2
* The B60347 and 27204 are unique cylinders and have multiple ports
1-1/2
1-1/2
1-1/2
2
1-1/2
1-1/2
1-1/2
1
1
1-1/2
2
1
2
1-1/2
1-1/2
1
1
1
1
5/8
1/2
1
1
1
1/2
1/2
1
1
1
1
1-1/4
1
1
1
1
1
1
5/8
1/2
1
1
1
1/2
5/8
1
1
1
1
1-1/4
1
1
0°
0°
90°
0°
90°
90°
90°
* 90°
90°
* 90°
90°
0°
0°
0°
90°
90°
0°
90°
2
1-3/4
1-1/2
2
11-3/8
15-1/4
17-1/4
21
15-1/4
17
15-3/8
11-3/8
17
14-7/8
14-3/4
15-3/4
15-1/4
24-1/2
11
11-1/2
11-9/16
13-1/4
C
Lit. No. 29032, Rev. 04 40 July 1, 2009
HYDRAULIC COMPONENTS
Hydraulic Hose Identifi cation
SAE O-Ring End NPTF End JIC End
Part Length (in) Type
8728
376
5223*
56710
4424
56599
56599
44315
44348
5749
56765
56592
4428**
56754
3074
56598
2707*
36
36
36
38
42
28
32
32
32
18
22
22
26
Bulk
8
16
18
Fittings
HP
HP
HP
HP
LP
HP
HP
HP
N/A
JIC to JIC
1/4" JIC to JIC
1/4" NPTF to SAE O-Ring
1/4" JIC to JIC
1/4" NPTF to 1/4" NPTF
1/4" JIC to JIC
3/8" NPTF to 1/4" NPTF
HP
HP
HP
HP
1/4" NPTF to 1/4" NPTF
1/4" NPTF to 1/4" NPTF
3/8" NPTF to 1/4" NPTF
1/4" JIC to JIC
HP
HP
1/4" NPTF to 1/4" NPTF
JIC to JIC
HP 1/4" JIC to JIC
HP
HP
3/8" JIC to JIC
3/8" JIC to JIC
LP = Low Pressure
Part Length (in) Type
1665
5192
2504**
44868
6066*
2518**
2516**
1685**
375
56591
44316
4472**
1664
5193
2503**
44867
66
66
72
72
60
60
60
60
54
54
54
57
42
42
45
48
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
* This part will no longer be available once existing inventory is depleted.
** This part is no longer available.
Control Cable Identifi cation
HP = High Pressure
Fittings
1/4" NPTF to 1/4" NPTF
1/4" JIC to JIC
3/8" JIC to JIC
1/4" NPTF to SAE O-Ring
1/4" NPTF to SAE O-Ring
1/4" NPTF to 1/4" NPTF
3/8" NPTF to 1/4" NPTF
3/8" JIC to JIC
1/4" NPTF to SAE O-Ring
1/4" NPTF to 1/4" NPTF
3/8" NPTF to 1/4" NPTF
3/8" JIC to JIC
1/4" NPTF to 1/4" NPTF
3/8" NPTF to 1/4" NPTF
3/8" NPTF to 1/4" NPTF
1/4" NPTF to SAE O-Ring
Part Length (in)
A4949
30
A4922
A5701
32
36
A4488
6027
A5461
A4926
A2844
A2845
A4489
A2846
40
45
67
78
78
78
84
84
A2847
84
Use
SLC Cable
SLC Cable
SLC Cable
SLC Cable
SLC Cable
SLC Cable
SLC Cable
Angle Cable
Raise Cable
SLC Cable
Angle Cable
Raise Cable
Part Length (in)
A4490
90
A2848
A2849
90
90
A5930
A5931*
A5843**
A5844
7375
9240
A5929
A5795
90
90
108
108
144
300
90
108
4418
* This part is no longer available. PN A5930 should be used in its place.
** This part is no longer available. PN A5844 should be used in its place.
Use
SLC Cable
Angle Cable
Raise Cable
Adjustable Cable
Nonadjustable Cable
Nonadjustable Cable
Adjustable Cable
Adjustable Control Cable
Throttle Cable – To be Obsolete
SLC w/Cables
SLC w/Cables
Ball Stud Retainer Clip
Used in Control PN 4419
T-Handle: Raise PN 4074
Angle PN 4075
}
To Be
Obsolete
Pump Shaft Seals for PN A2311 and A5075 Belt Drive Pumps
Measure the outside diameter of the seal.
1" OD
1-1/4" OD
PN 2768
PN 5034 (Also found in kit PN A5038K seal with snap ring
Lit. No. 29032, Rev. 04 41 July 1, 2009
HYDRAULIC COMPONENTS
NOTE: This index is not current and appears as it did in a 1995 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 42 July 1, 2009
HYDRAULIC COMPONENTS
NOTE: This index is not current and appears as it did in a 1995 Parts & Service Manual. It is to be used for reference and should not take the place of the Kit Selection Guide/eMatch. Kits listed may no longer be available.
Lit. No. 29032, Rev. 04 43 July 1, 2009
RECOMMENDED TOOLS –
Available from your FISHER
®
outlet
Pressure Test Kit (PN 56686) Motor Bearing Sleeve Repair Kit
(PN 64589)
Requires 3/8"-24 x 4" bolt to service XtremeV and
XLS valve blocks.
XtremeV™/XLS™ adapter PN 6-4F50X Parker
Packing/Gland Nut Removal Tool
(PN 26612)
Poppet Seat Service Tool
(PN 28530)
Replacement
Bearing Sleeve w/O-Rings – PN 64596
Pump Shaft Seal Repair Kit
(PN 28856)
PN 28877
Trip Spring Removal Tool
(PN 20043-1)
Diagnostic Harness Kit
for multi-plex
(PN 29290-1)
A
A
B
Lit. No. 29032, Rev. 04
B
44
Requires
1/4"-28 x 4-1/2" bolt to service XtremeV and XLS valve blocks.
3- & 4-Port Isolation Module Tester
(PN 26470-2)
Adapter (PN 29294-1)
(for all non "-1" Tester kits)
TURN SIGNAL
LOW BEAM
HIGH BEAM
1 2
LOW BEAM
HIGH BEAM
HIGH BEAM #2
3 4
CONTROL POWER
PLOW ATTACHED
IGNITION SWITCH
HIGH BEAM
LOW BEAM
TURN SIGNAL
PARK LIGHTS
DOUGLAS DYNAMICS, L. L. C.
HIGH BEAM #2
HIGH BEAM
LOW BEAM
PART NUMBER 26471
ISOLATION MODULE
TESTER
POWER
ON ON ON
OFF
DEDICATED DRL
BULB SYSTEM
OFF
HIGH
BEAM #2
POS (+)
LEFT RIGHT
NEG (-)
HEAD LAMP
COMMON
TURN SIGNAL
ON HIGH
ON
OFF
IGNITION
SWITCH
ON
OFF
PLOW
ATTACHED
LOW
HEAD LAMP
OFF
PARK LAMP
OFF
July 1, 2009
SPREADERS
Hopper and Tailgate Spreader Service Part Identifi cation
Part Description
9189
RC MS – 14"
9194
RC MS – 26" ext.
9031
RC SS – 14"
9032
RC SS – 26" ext.
9107
HC MS – 31"
9108
HC MS – 19"
68920
HC SS – 31"
68921
HC SS – 19"
95424-1 MS – Belt Drive – 14"
95425-1 SS – Belt Drive – 14"
95426-1 MS – Belt Drive – 26"
95427-1 SS – Belt Drive – 26"
Chutes
Serial #s
ALL Non PRO-CASTER™ Spreaders
ALL Non PRO-CASTER Spreaders
ALL Non PRO-CASTER Spreaders
ALL Non PRO-CASTER Spreaders
ALL Non PRO-CASTER Spreaders
ALL Non PRO-CASTER Spreaders
ALL Non PRO-CASTER Spreaders
ALL Non PRO-CASTER Spreaders
ALL PRO-CASTER Spreaders
ALL PRO-CASTER Spreaders
ALL PRO-CASTER Spreaders
ALL PRO-CASTER Spreaders
Part Application
Original PRO-CASTER Offset Chutes
*
Part Application Part Application Part Application
94357* 14" MS
94357-1* 19" MS
94924* 14" SS
94924-1* 19" SS
94474* 26" MS
94474-1* 26" MS
94940* 26" SS
94940-1* 26" SS
Replacement Belt Drive Chutes w/Rework Kit 95496 (MS)* or 95497 (SS)*
95424-1* 14" MS
* No longer available.
95425-1* 14" SS 95426-1* 26" MS 95427-1* 26" SS
Part Description
68351
68350
68431
#40 – 26-1/2" RC – Spinner
#40 – 29-1/2" RC – Drive
#40 – 30-1/2" HC – Spinner
Roller Chains
Serial #s
3850–4808, 4809 – Higher
3850–4808, 4809 – Higher
3850–4808, 4809 – Higher
0000–0732
9225
#40 – 35" RC – Drive
68417
9188
9220
20325
20341
#40 – 36-1/2" HC – Drive
#40 – 38" RC – Spinner
#40 – 39" RC – Drive
#40 – 42" HC – Spinner
#40 – 47" HC – Drive
3850–4808, 4809 – Higher
0000–3849
0733–3849
2092–3849
2092–3849
95778
#40 – 63" POLY-CASTER™ ONLY ALL
78075
#40 – 29-1/2" POLY-CASTER II ONLY ALL
Part Description
Conveyor Chains
**
Serial #s
20334
8' HC – 16" 124 link
20335
68349
10' HC – 16" 153 link
8' RC MS & SS – 11.65" 123 link
2091–3849 Non PRO-CASTER Spreaders
2091–3849 Non PRO-CASTER Spreaders
3850–4996, 4809 – Higher, 5645 – Higher
Non PRO-CASTER Spreaders
0000–3849 Non PRO-CASTER Spreaders
9177
8' RC MS & SS – 11.875" 123 link
94462
68474
68435
7' RC MS & SS – 11.65" 108 Link
8' HC MS & SS – 15.65" 123 link
8' MS & SS – 15.65" 123 link
10' HC MS & SS – 15.65" 153 link
4809 – Higher Non PRO-CASTER Spreaders
3850–4996, 4809 – Higher, 5645 – Higher
Non PRO-CASTER Spreaders
ALL PRO-CASTER Spreaders
3850–4996, 4809 – Higher, 5645 – Higher
Non PRO-CASTER Spreaders
ALL PRO-CASTER Spreaders 10' MS & SS – 15.65" 153 link
94898
7' MS & SS – 15.65" 108 link
95361
9' MS & SS – 15.65" 138 link
ALL PRO-CASTER Spreaders/8' POLY-CASTER II
ALL PRO-CASTER Spreaders
78076
7' POLY-CASTER II – 15.65" 99 link ALL POLY-CASTER II Spreaders
94898
8' POLY-CASTER II – 15.65" 108 link ALL POLY-CASTER II Spreaders
** The measurement is the overall width from the outside of one pin to the outside of the other.
Lit. No. 29032, Rev. 04 45 July 1, 2009
A
SPREADERS
SPREADER GEAR CASE REFERENCE CHART
A
E
D
F
E
D
C
B
F
B
C
Part Number
95756
95567
68803
65762
68374
2
68412
2
9171
68384
3
68463
3
A
Input
Shaft OD
Output
Shaft OD
5/8
1
5/8
5/8
1
1
1
1
1
B
3/4
1-1/8
3/4
3/4
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
94349 1 1-1/8
95567 1 1-1/8
1 Stub shaft directly below input shaft
2
68374 and 68412 both use the 68732 gear case
3
68384 and 68463 both use 68733
Lit. No. 29032, Rev. 04
MEASUREMENT
C D
Output
Shaft
Length
Input
Shaft
Length
POLY-CASTER™
E
Input
Shaft
Length to
Shoulder
5
POLY-CASTER II
18-3/8 4-7/32
SPEED-CASTER™ 2
3-3/16
3-3/16
Non PRO-CASTER™
14-3/8
14-3/8
2
18-3/8
7-7/8
7-7/8
8-3/8
7-7/8
18-3/8 7-7/8
PRO-CASTER
18-3/8
18-3/8
4-7/32
4-7/32
F
Output
Shaft
Length to
Shoulder
2-5/8
2-5/8
2-5/8
46
Comments
S/N 202650 & higher
S/N 202389 – 202649
July 1, 2009
Part
9191
9192
20319
20320
94407
94477
95294
94684
95420
95421
95795
95960
78067
SPREADERS
Hopper and Tailgate Spreader Service Part Identifi cation
Part Description
Gear Boxes
Serial #s
9171
RC & HC
65762
68384* HC
68803
68374
RC
68412
RC – Hydraulic
95567
RC & HC
94349
RC & HC
95756
0000–3849 Non PRO-CASTER™ Spreaders
202389–202649 SPEED-CASTER™ 2 Spreaders
3850–4808, 4809 – Higher Non PRO-CASTER Spreaders
202650 – Higher SPEED-CASTER 2 Spreaders
3850–4808, 4809 – Higher Non PRO-CASTER Spreaders
4809 – Higher Non PRO-CASTER Spreaders
0402 – Higher PRO-CASTER & POLY-CASTER™ II Spreaders
0001–0401 PRO-CASTER Spreaders (use 95400 coupler)
POLY-CASTER™ Spreaders
Spinner Shafts
Length (in) Diameter (in) Application
23
35
27
39
19-1/4
31-1/4
24-1/4
20-5/8
28-1/2
40-1/2
16-1/2
32-1/2
35-7/8
1
1
1
3/4
13/16
3/4
1
1
1
1
3/4
3/4
1
14" Chute – Non PRO-CASTER Spreaders (RC)
26" Chute – Non PRO-CASTER Spreaders (RC)
19" Chute – Non PRO-CASTER Spreaders (HC)
31" Chute – Non PRO-CASTER Spreaders (HC)
14" Offset Chute – Early PRO-CASTER Spreaders
26" Offset Chute – Early PRO-CASTER Spreaders
19" Offset Chute – Early PRO-CASTER Spreaders
Dual Hydraulic – Early PRO-CASTER Spreaders
14" Center Belt Drive Chute – PRO-CASTER Spreaders
26" Center Belt Drive Chute – PRO-CASTER Spreaders
Standard Chute – POLY-CASTER Spreaders
Extended Chute – POLY-CASTER Spreaders
POLY-CASTER II Spreaders
Part
20321
94319
94513
94510
Diameter (in)
14-1/2
14-1/2
14-1/2
9-7/8
Material
Spinners
Application
Black Steel 9107, 9108, 68920, 68921 – Non PRO-CASTER Spreaders (HC)
Stainless 9107, 9108, 68920, 68921 – Non PRO-CASTER Spreaders (HC)
Poly
Poly
Poly
9107, 9108, 68920, 68921 – Non PRO-CASTER Spreaders (HC)
Low Profi le Model 1000 and Low Profi le Model 2000 Low Profi le
Tailgate Spreaders
94357, 94474 – PRO-CASTER Spreaders
Poly 9031, 9032, 9189, 9194 – Non PRO-CASTER Spreaders (RC)
94884
94514
9196
20095
94512
9519
67090
94511
P3047
P2024
94748-1
94749-1
95280
12
12
11-7/8
11-3/4
10-3/16 sq.
sq.
15-3/4
15-7/8
9-7/8
9
18
18
18
Black Steel 9031, 9032, 9189, 9194 – Non PRO-CASTER Spreaders (RC)
Stainless 9031, 9032 – Non PRO-CASTER Spreaders (RC)
Poly 67274 – SPEED-CASTER™ Spreaders
Black Steel 67274 – SPEED-CASTER Spreaders
Black Steel 67130 – SPEED-CASTER 2 Spreaders
Poly
Black Steel
67130 – SPEED-CASTER 2 Spreaders
Low Profi le Model 1000 (10003 – Higher) and
Low Profi le Model 2000 (20364 – Higher) Tailgate Spreaders
Black Steel Low Profi le Model 110 Tailgate Spreaders (noncurrent)
Poly
Poly
Poly
UTS 696 MS (Frame of spinner assembly)
UTS 696 SS (Frame of spinner assembly)
UTS 696 (Spinner Kit)
94511
94513
94424
15-1/2
14-1/2
15-1/2 Poly
Standard POLY-CASTER Spreaders
Extended POLY-CASTER Spreaders
94424 – POLY-CASTER II Spreaders
* Shaft must be drilled for use on hydraulically driven spreaders; PN 68384 replaces PN 68463
Lit. No. 29032, Rev. 04 47 July 1, 2009
SPREADERS
Hopper and Tailgate Spreader Service Part Identifi cation
Part
9193
20322
95488
94897
Description
3/4" Pillow Block Bearing w/Locking Collar
1" Pillow Block Bearing
1" Bearing Kit – Center
Belt Drive
Spinner Bearing Kit –
Offset Direct Drive
Spinner Shaft Bearings
Chutes
9189, 9031,
9194, 9032
9101, 9108,
68920, 68921
95424, 95425,
95426, 95427
94357, 94357-1,
94474, 94474-1,
94924, 94924-1,
94940, 94940-1,
95224, 95225
Serial #s
0733–2599, 2600–3849 RC, 3850–4808 RC,
4809 – Higher RC Non PRO-CASTER™ Spreaders
2600–3849 HC, 3850–4808 HC, 4809 – Higher HC
Non PRO-CASTER Spreaders
0303 – Higher PRO-CASTER Spreaders
0126–0302 PRO-CASTER Spreaders
0144–0302 PRO-CASTER Dual-Hydraulic
Spreaders
Part
9187
20323
95489
95244
Hydraulic Coupling Kit
Spinner Shaft Drive Components
Description
Sprocket – #40 x 24 Tooth
3/4" ID
Sprocket – #40 x 24 Tooth
1" ID
Center Belt Pulley Kit w/
Key
95400
Offset Chute Coupling Kit
Chutes
9189, 9031,
9194, 9032
9101, 9108,
68920, 68921
95424, 95425,
95426, 95427
94357, 94357-1,
94474, 94474-1,
94924, 94924-1,
94940, 94940-1,
95224, 95225
Serial #s
0733–2599, 2600–3849 RC, 3850–4808 RC,
4809 – Higher RC Non PRO-CASTER Spreaders
2600–3849 HC, 3850–4808 HC, 4809 – Higher HC
Non PRO-CASTER Spreaders
0303 – Higher PRO-CASTER Spreaders
0126–0302 PRO-CASTER Spreaders
95224, 95225
0144–0302 PRO-CASTER Dual-Hydraulic
Spreaders with Offset Chute
Part
9163
20333
Conveyor Drive Gears
Description Serial #s
Sprocket – 6T x 1.125" ID
0733–2599, 2600–3849 RC, 3850–4808 RC & HC,
4809 – Higher RC & HC Non PRO-CASTER Spreaders
0126 – Higher PRO-CASTER Spreaders
Sprocket – 8T x 1.13" ID 2600–3849 HC Non PRO-CASTER Spreaders
Part
9162
20337
94953
Part
9184
20329
68434
94351
Description
2-Bolt Flange
Bearing – 1-1/8"
4-Bolt Flange
Bearing – 1-1/8"
Spreader Bearing Kit –
Conveyor
Drive Shaft Bearings
Serial #s
0733–2599, 2600–3849 RC, 3850–4808 RC & HC,
4809 – Higher RC & HC Non PRO-CASTER Spreaders
2600–3849 HC Non PRO-CASTER Spreaders
0126 – Higher PRO-CASTER Spreaders
Size
1" x 16"
1.13" x 20.5"
.998" x 20"
.986" x 20.5"
Conveyor Idler Shafts
Serial #s
0733–2599, 2600–3849 RC, 3850–4808 RC,
4809 – Higher RC Non PRO-CASTER Spreaders
2600–3849 HC Non PRO-CASTER Spreaders
3850–4808 HC, 4809 – Higher Non PRO-CASTER Spreaders
0126 – Higher PRO-CASTER Spreaders
Lit. No. 29032, Rev. 04 48 July 1, 2009
SPREADERS
Hopper and Tailgate Spreader Service Part Identifi cation
Part Description
9183
Idler Sprocket w/Bushing –
20332
9163
6T x 1.00" ID
Idler Sprocket w/Bushing –
8T x 1.13" ID
Sprocket w/Keyway & No
Bushing – 6T x 1.125" ID
Idler Shaft Gears
Serial #s
0733–2599, 2600–3849 RC, 3850–4808 RC & HC,
4809 – Higher RC & HC Non PRO-CASTER™ Spreaders
2600–3849 HC Non PRO-CASTER Spreaders
0126 – Higher PRO-CASTER Spreaders
Part Description
9182K Rod End – 1"
20331
Rod End – 1-1/8"
94953
Spreader Bearing Kit
Idler Shaft Bearings
Serial #s
0733–2599, 2600–3849 RC, 3850–4808 RC & HC,
4809 – Higher RC & HC Non PRO-CASTER Spreaders
2600–3849 HC Non PRO-CASTER Spreaders
0126 – Higher PRO-CASTER Spreaders
Part Description
94691
Engine to Clutch
95418
Clutch to Spinner
PRO-CASTER V-Belts
Serial #s
All PRO-CASTER Spreaders (42370)
PRO-CASTER Spreaders w/Center Belt Drive (42300)
Engine Conversion Kit
Part Description
94497
8.5 HP Briggs & Stratton–to–10 HP Tecumseh No Longer Available
Part Description
94890
Vehicle harness, control and misc. hardware
94655
Gas Spreader Parts Kits
Serial #s
All PRO-CASTER Spreaders
All Non PRO-CASTER Spreaders
Repair Harnesses
Part Description
66427
Spreader Harness – 11-Pin Repair End
Serial #s
ALL PRO-CASTER Spreaders
67482
Spreader Harness – 7-Pin Repair End
66426
Vehicle Harness – 11-Pin Complete Harness
67481
Vehicle Harness – 7-Pin Complete Harness
63726
Vehicle Harness – 11-Pin Repair End
ALL Non PRO-CASTER Spreaders
ALL PRO-CASTER Spreaders
ALL Non PRO-CASTER Spreaders
ALL PRO-CASTER Spreaders
Belt–Chain Drive Conversion Kit
Part Description
95736
Chain-Belt Drive Conversion Kit
Serial #s
All PRO-CASTER Belt-Driven Spreaders
95737
Chain-Belt Drive Conversion Kit
Tailgate Spreader Wiring
Part Description
28953
Control Installation Kit for Variable Speed Control (28867)
65516
Control Installation Kit for ON/OFF Spreader Control (9390) and PRO-CASTER Control
29244
Kit converts old style round connector (PN 2157 / 2156) to new style 4-pin connector
Lit. No. 29032, Rev. 04 49 July 1, 2009
Dia. x Length
(in)
3/16 x 1
3/8 x 1
3/8 x 3-1/4
1/2 x 1-9/16
1/2 x 2-1/2
5/8 x 4-3/4
3/4 x 1-7/8
3/4 x 2-3/16
3/4 x 3-15/32
3/4 x 3-1/2
13/16 x 24-1/2
1 x 2-3/4
1 x 3-5/16
1 x 3-5/16 HT (Heat
Treated)
1 x 4-1/16
1 x 4-3/4
1 x 6
1 x 6-1/4
1 x 6-13/16
1 x 8
1 x 8-11/16
1 x 15-13/16
1 x 17-9/16
1 to 3/4 x 2-1/2
(Stepped Pin)
1-1/8 x 10-1/8
1-1/4 x 3-1/16
1-1/4 x 4-9/16
1-1/4 x 5
1-1/4 x 5-5/8
1-1/4 x 6-21/32
1-1/2 x 4-3/8
1-1/2 x 7
1-1/2 x 8-1/2
1-1/2 x 9-3/4
5/8 x 2
5/8 x 3
1-1/8 x 9-1/2
1/2-13 x 2-1/2
1 x 2-13/16
1-8 x 9
3/4 x 3-1/4
Pin
4491
26780
26219
28978
20988
27227
6814
7491
5149
50651
50653
50668
69669
69666
69667
69607
5022
26164
5150
20790
5142
20789
5141
95720
6816
22260
6817
6815
26833
27979
22259
26060
44028
MISCELLANEOUS
Clevis Pin Identifi cation
Kit Application
Cable to valve block – Belt Drive Hydraulics
27171K Stop link to cable – Minute Mount
®
2 System
Clevis pin locates and retracts connecting pin – Minute Mount 2 System
26656K Shoulder bolt and nut – trip spring assembly
29037 Stop link to lift arm – Minute Mount 2 System
67921 Hitch pin – Blade wing extension (XtremeV™)
4289K Lift arm to headgear pin
5523K
20639K
6990
Base angle pin – MC Blade (original), EZ-V
L and M Blades
® Blade, HS Blade, HT Series™,
Base angle pin – MC Blade (original) "double ears" next to inner trip springs;
A-frame to plow gear – Personal Plow
Commercial EHP
Pivot pin – EZ-V Blade
27241 Base angle pin – MC Blade (current), XBLADE™ & XtremeV Snowplow
7904K
Lift ram pin (lower only on Minute Mount 2 System; upper and lower on original Minute Mount
®
System); Push Assembly to lower gear – original
Minute Mount system EZ-V Snowplow
29038 Upper lift ram pin – Minute Mount 2 System
7903K
Angle ram pin at A-frame – noncommercial plows; base angle pin – MC
Blade (current) "double ears" next to inner trip springs & XLS™ Blades
Angle ram pin at blade – EZ-V, RD, HD, HT Series XtremeV & XLS Blades
7905K Pivot pin – L, HS Blades; angle rams – EZ-V Blade with blade stop
6920K Connecting pin w/handle – original Minute Mount System
27168K Connecting pin – Minute Mount 2 System
Pivot pin – LD & SD Blades
Pivot pin – LD Blade
Pivot pin – M Blade
Pivot pin – XtremeV Blade
27177K A-frame to lower gear pin – Minute Mount 2 System
5458
Pivot pin – commercial tilt-hood headgear
A-frame to headgear – MC Blade w/Minute Mount 2 System
A-frame to lower gear – MC Blade; angle ram pin – commercial blades
Angle ram pin – MC Blade
Angle ram pin – MC Blade
Pivot pin – MC Blade
Hinge outer pin – Commercial Blade
Commercial connecting pin – original Minute Mount System
Hinge center pin – Commercial Blade
Pivot pin – HC Blade
XLS wing cylinder box end – rod end
XLS wing cylinder anchor end – base end; HT Series lift cylinder – base end
XLS pivot bolt w/nut
HT Series lift cylinder rod end bolt G5
HT Series base end pin angle ram shear pin
HT Series pivot bolt w/nut G5
HT Series A-frame to headgear
Lit. No. 29032, Rev. 04 50 July 1, 2009
MISCELLANEOUS
"Dashed" Kit Numbers
Part Description
1213-1 Homesteader™ Mount – Ford Explorer
1533-1 Homesteader Mount – GM Trailblazer/Envoy
20703-1 A-Frame – MC
21484-1 EZ-V
®
Push Assembly
21500K-1 Motor Assembly
21696-1 MC Conversion A-Frame w/Hardware
21727-2 Pressure Control Breather
21874-1 EZ-V A-Frame Assembly
21874-2 EZ-V A-Frame Assembly
21874-3 EZ-V A-Frame Assembly
Change
Redesigned to allow access to oil fi lter on V8 models
Redesigned rear brackets to accommodate '05 frame change
Added 2 chain tabs for lift chain to the end of A-frame
Added 1" to the width where drilling is required
New design multi-position motor with drain in cap
Added 2 chain tabs for lift chain to the end of A-frame
Design changed to reduce moisture ingression
Made bolt-together diagonal bracing a welded part
Made A-frame channel 1" wider
Updated hinge/weld on pivot tubes
22147-1 Valve Manifold Assembly
22150-1 Manifold Assembly
22155-1 Hydraulic Unit 4000 psi
22160-1 Hydraulic Unit 2500 psi
22470-1 LD/RD/HD Rubber Defl ector Kit
26018-1 Mini Strobe Light
26020-1 Mini Bar Light
26047-2
26360-1 Plug-In Harness HB-3 & HB-4-A, Long
26361-1 Plug-In Harness HB-3 & HB-4-A, Short
26470-1 Isolation Module Tester
Added SAE O-ring ports
Added SAE O-ring ports
Added SAE O-ring ports
Added SAE O-ring ports
Added hole to adapt for all L and M Blades
Changed lens and fl ash tube
Changed lens and lamp
Updated DRL information
Installation instructions changed to accommodate new models
Installation instructions changed to accommodate new models
Added 3-Port test adapter (PN 29294) and instructions for
3-Port Isolation Module
Literature change 26470-2 Isolation Module Tester
26500-1 Central Hydraulics Control Harness Kit
26705-1 On-Truck Electrical Kit – Isolation Module
26757-1 Minute Mount ® 2 Lift Arm (yellow)
27560-1 Minute Mount 2 Lift Arm (silver)
26781-1 Suction Filter
26781-2 Suction Filter
26781-3 Suction Filter
26812-1 Plow Parka
Changed the battery cable to 61169 (was 8274)
Added Adapter PN 29047 for 3-Port Isolation Module
Added heat-treated clevis pin and revised stop link
Added heat-treated clevis pin and revised stop link
Literature Change
Literature Change
Literature Change
Resized for Minute Mount 2 system w/INTENSIFIRE™ Headlamps
27086-1 Bulk Motor Relay Kit
27255-1 Minute Mount 2 MC Series A-Frame Kit
Changed to 5794K-1 relay and decreased quantity from 50 to 48
Moved A-frame and headgear attachment point to aid mounting
27480-1 Plug-In Harness Kit HB-3 & HB-4-A, White Label Installation instructions changed to accommodate new models
27600-1 XBLADE™ Rubber Defl ector Kit
27750-1 Minute Mount 2 LD Headgear Kit
27968-1 Adapter Kit
27995-1 Minute Mount 2 LD A-Frame Kit
28027-1 Adapter Kit
28027-2 Adapter Kit
28350-1 Lift Arm Service Kit
Modifi ed to fi t 7-1/2'–9' XBLADE snowplows
Updated A-frame length to accommodate new LD blade
(1-1/2" longer)
Literature Change
Updated A-frame length to accommodate new LD blade
(1-1/2" longer)
Added 3-Port module to instructions
Reworked wiring to eliminate potential problems w/2007 GM
Vehicles
Added heat-treated clevis pin and revised stop link
28800-1 Headlamp Kit (Pair) w/ Harness
28801-1 Headlamp Kit (DS) w/o Harness
28800-1 Headlamp Kit (PS) w/o Harness
28860-1 Adapter Kit
29056-1 Adapter Kit
29070-1 3-Port Module – DRL/Non-DRL
29290-1 Harness Kit Diagnostic
29294-1 Adapter Kit
Added 3rd screw for rear cover
Added 3rd screw for rear cover
Added 3rd screw for rear cover
Literature and Label Change
Changed instructions and wire locations
Module Change; Replaces 29060 & 29070
Modifi ed to work with XtremeV™ and XLS™ blades
Literature Change
Lit. No. 29032, Rev. 04 51 July 1, 2009
MISCELLANEOUS
"Dashed" Kit Numbers
Part Description
29400-1 Plug-In Harness Kit
29400-2 Plug-In Harness Kit
29760-1 3-Port Isolation Module – Blue Label
307-1 Shoe Spacer
3713-1 Truck Mount – Jeep
3713-2 Truck Mount – Jeep
31543-1 Truck Mount – GM Colorado/Canyon
44281-1 Back Drag Edge Kit
44281-2 Back Drag Edge Kit
44282-1 Back Drag Edge Kit
44282-2 Back Drag Edge Kit
44283-1 Back Drag Edge Kit
44283-2 Back Drag Edge Kit
44327-1 Reservoir Kit
44329-1 Pump Kit
44354-1 Plow Module
44354-2 Plow Module
44475-1 Blade Assembly – 7.5 blade
44485-1 Blade Assembly – 8.5 blade
44495-1 Blade Assembly – 9.5 blade
44555-1 T-Frame
44556-1 Push Assembly
44600-1 Off-Truck Kit
44610-1 Blade Wing Extension Kit
44650-1 Off-Truck Kit
Change
Changed H11 connector to also fi t Toyota's H11 connector
11-pin vehicle light harness with built-in 28027-2
New module covers DRL and non-DRL applications '08 Ford only
Increased diameter
Non "dash 1" kit does not fi t 2002 models
Clamping plates removed from bolt bag
Added Extension Bracket Kit PN 40734
Added hole to match 4-piece cutting edge
Added washers to bolt bag
Added hole to match 4-piece cutting edge
Added washers to bolt bag
Added hole to match 4-piece cutting edge
Added washers to bolt bag
Literature change
Literature change
Service Part for both XtremeV™ & XLS™ Blades
Software Change
Changed to 4-piece cutting edge
Changed to 4-piece cutting edge
Changed to 4-piece cutting edge
Overlapping holes eliminated; angle braces revised
Hole added to side plates making it compatible with -1 T-Frame
Revised -1 T-Frame; push assy. & hardened steel pivot pin added
Redesigned wings
Revised -1 T-Frame; push assy. & hardened steel pivot pin added
44675-1 Blade Assembly – 7.5 XtremeV Blade MS
44685-1 Blade Assembly – 8.5 XtremeV Blade MS
44695-1 Blade Assembly – 9.5 XtremeV Blade MS
44740-1 3/8" x 6" x 7-1/2' XtremeV Cutting Edge
44742-1 1/2" x 6" x 7-1/2' XtremeV Cutting Edge
44741-1 3/8" x 6" x 8-1/2' XtremeV Cutting Edge
44743-1 1/2" x 6" x 8-1/2' XtremeV Cutting Edge
Changed to 4-piece cutting edge
Changed to 4-piece cutting edge
Changed to 4-piece cutting edge
Revised to 4-Piece kit to improve anti-wear characteristics
Revised to 4-Piece kit to improve anti-wear characteristics
Revised to 4-Piece kit to improve anti-wear characteristics
Revised to 4-Piece kit to improve anti-wear characteristics
44744-1 1/2" x 6" x 9-1/2' XtremeV Cutting Edge
44775-1 Blade Assembly – 7.5 XtremeV Blade SS
44785-1 Blade Assembly – 8.5 XtremeV Blade SS
44791-1 Xtreme V Parts Bag
44795-1 Blade Assembly – 9.5 XtremeV Blade SS
49258-1 Seal Kit Valve
49259-1 Seal Kit Valve
56831-1 Hose 1/4" x 36" w/FJIC Ends (Obsolete)
5794K-1 Motor Relay Kit
63827-1 Dodge 1500 Truck Mount
65605-1 Spreader Battery Kit
65605-2 Spreader Battery Kit
Revised to 4-Piece kit to improve anti-wear characteristics
Changed to 4-piece cutting edge
Changed to 4-piece cutting edge
Changed to 4-piece cutting edge
SV08-2004, CV08
SV08-30, 31 & 33
PN Consolidation; Literature & packaging change
Changed to heavier duty cycle
Added cross brace for trucks with factory-installed hitch
Added new starter relay kit
Added new 6-pin Tecumseh alternator harness
65605-3 Spreader Battery Kit
65990-1 Spreader Battery Kit Parts Bag
Update for Briggs & Stratton engine – charging wire
Support changes in 65605 kit
65990-2 Spreader Battery Kit Parts Bag Added Briggs & Stratton wiring
66771-1 Sec. Manifold Assembly w/Coils, Cart. & Covers Added SAE O-ring ports
66772-1 Sec. Manifold Assembly w/o Coils, Cart. & Covers Added SAE O-ring ports
66773-1 Primary Manifold Assembly w/Coils, Cart. & Covers Added SAE O-ring ports
66775-1 Primary Manifold Assembly w/o Coils, Cart. & Covers Added SAE O-ring ports
66779-1 EZ-V ® Hydraulic Unit Added SAE O-ring ports
Lit. No. 29032, Rev. 04 52 July 1, 2009
MISCELLANEOUS
"Dashed" Kit Numbers
Part Description
66860-1 Hopper Control Assembly
67040-1 Dodge Tailgate Spreader Mount
67040-2 Dodge Tailgate Spreader Mount
Change
Added new ground harness
Revised to fi t redesigned vehicle exhaust
Revised to fi t redesigned vehicle rear spring shackle
67487-1 Dodge Tailgate Spreader Mount Rear Brkt – DS Revised to fi t redesigned vehicle rear spring shackle
67488-1 Dodge Tailgate Spreader Mount Rear Brkt – PS Revised to fi t redesigned vehicle rear spring shackle
68940-1 Engine Mount
68941-1 Mild Steel Engine Base
Converted to in-line chute (made offset chute obsolete)
Converted to in-line chute (made offset chute obsolete)
7146-1 Minute Mount ® Pec. Attach. Kit – Topkick/Kodiak T50 Revised for Minute Mount ® 2 MC headgear
7151-1 Minute Mount Peculiar Attachment Kit – Internat'l Added additional notches for brake line clearance
7151-2 Minute Mount Peculiar Attachment Kit – Internat'l Increased skid bar clearance for Minute Mount 2 MC headgear
7152-1 Minute Mount Pec. Attachment Kit – F700/F800 Increased skid bar clearance for Minute Mount 2 MC headgear
7154-1 Minute Mount Pec. Attach. Kit – Topkick/Kodiak T40 Increased skid bar clearance for Minute Mount 2 MC headgear
7156-1 Minute Mount Pec. Attachment Kit – Univ. Comm. Increased skid bar clearance for Minute Mount 2 MC headgear
7159-1 Minute Mount Peculiar Attachment Kit – Ford Added notch in DS pushplate to accommodate pitman arm
7159-2 Minute Mount Peculiar Attachment Kit – Ford
7162-1 Minute Mount Peculiar Attachment Kit – Mitsu.
Adapted pushplates to accommodate change in diesel engine
Redesigned trailing arm (recalled 7162 trailing arms)
7163-1 Minute Mount Peculiar Attachment Kit – Wrangler Revised to accommodate 1999 frame bracket (replaced spacer)
7170-1 Minute Mount Peculiar Attachment Kit – Ram Non "dash 1" kit does not fi t diesel vehicles
7170-2 Minute Mount Peculiar Attachment Kit – Ram
74700-3 Hopper Spreader
Non "dash 2" kit does not fi t Laramie package
Change to Briggs & Stratton engine
7629K-3 Relief Valve Repair Kit
7632K-2 O-Ring/Backup Ring Kit
7634K-1 Valve SV08-2004 w/Jam Nut
7636K-1 Valve SV08-2004 w/Jam Nut
7639K-1 Coil w/Spade Terminal
8416-1 Common Light Kit – 9-Pin
8430-1 Common Light Kit – 9-Pin Commercial
8437-1 Plug-In Harness Kit HB-3 & HB-4-A, Lt. Green
8446-1 Minute Mount MC A-Frame Kit
8447-1 MC Conversion Attachment Kit
9027-1 Variable Speed Control (PWM)
9390-1 ON/OFF Control (Boxed)
94582-1 Baffl e Hood
94699-1 Engine Cover
94700-1 PRO-CASTER™ Hopper Spreader
94700-2 PRO-CASTER Hopper Spreader
94700-3 PRO-CASTER Hopper Spreader
94701-1 PRO-CASTER Hopper Spreader
Literature change
Added XLS™ hydraulic parts
Literature change
Literature change
Literature change
Extended length of wire harness for Insta-Act ® hydraulic unit
Extended length of wire harness for Insta-Act hydraulic unit
Wiring changes for 2004 Colorado/Canyon
Added 2 chain tabs for lift chain to the end of A-frame
Added 2 chain tabs for lift chain to the end of A-frame
Added 66413 adapter harness to back fi t 3-wire harness
Added 66413 adapter harness to back fi t 3-wire harness
Changed for Briggs & Stratton engine
Changed for Briggs & Stratton engine
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Changed for Briggs & Stratton engine
Converted to in-line chute (made offset chute obsolete)
94701-2 PRO-CASTER Hopper Spreader
94703-1 PRO-CASTER Hopper Spreader
94703-2 PRO-CASTER Hopper Spreader
94704-1 PRO-CASTER Hopper Spreader
94704-2 PRO-CASTER Hopper Spreader
94706-1 PRO-CASTER Hopper Spreader
94706-2 PRO-CASTER Hopper Spreader
94706-3 PRO-CASTER Hopper Spreader
94707-1 PRO-CASTER Hopper Spreader
94707-2 PRO-CASTER Hopper Spreader
94708-1 PRO-CASTER Hopper Spreader
94708-2 PRO-CASTER Hopper Spreader
94709-1 PRO-CASTER Hopper Spreader
Changed to chain drive
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Changed for Briggs & Stratton engine
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Converted to in-line chute (made offset chute obsolete)
Literature change
Converted to in-line chute (made offset chute obsolete)
Lit. No. 29032, Rev. 04 53 July 1, 2009
MISCELLANEOUS
"Dashed" Kit Numbers
Part Description
94709-2 PRO-CASTER™ Hopper Spreader
94709-3 PRO-CASTER Hopper Spreader
94710-1 PRO-CASTER Hopper Spreader
94710-2 PRO-CASTER Hopper Spreader
94711-1 PRO-CASTER Hopper Spreader
94712-1 PRO-CASTER Hopper Spreader
94712-2 PRO-CASTER Hopper Spreader
94712-3 PRO-CASTER Hopper Spreader
94713-1 PRO-CASTER Hopper Spreader
94714-1 PRO-CASTER Hopper Spreader
94715-1 PRO-CASTER Hopper Spreader
94716-1 PRO-CASTER Hopper Spreader
94716-2 PRO-CASTER Hopper Spreader
94717-1 PRO-CASTER Hopper Spreader
94718-1 PRO-CASTER Hopper Spreader
94718-2 PRO-CASTER Hopper Spreader
94718-3 PRO-CASTER Hopper Spreader
94719-1 PRO-CASTER Hopper Spreader
94719-2 PRO-CASTER Hopper Spreader
94720-1 PRO-CASTER Hopper Spreader
94721-1 PRO-CASTER Hopper Spreader
94721-2 PRO-CASTER Hopper Spreader
94722-1 PRO-CASTER Hopper Spreader
94722-2 PRO-CASTER Hopper Spreader
94723-1 PRO-CASTER Hopper Spreader
94746-1 UTS 696 Stainless Steel Spinner Frame
94747-1 UTS 696 Mild Steel Spinner Frame
94748-1 UTS 696 Mild Steel Spinner Assembly
94749-1 UTS 696 Stainless Steel Spinner Assembly
94918-1 Stainless Steel Engine Base
94940-1 PRO-CASTER Hopper Spreader
94952-1 Engine Cover
95350-1 PRO-CASTER Hopper Spreader
95350-2 PRO-CASTER Hopper Spreader
95350-3 PRO-CASTER Hopper Spreader
95351-1 PRO-CASTER Hopper Spreader
95351-2 PRO-CASTER Hopper Spreader
95352-1 PRO-CASTER Hopper Spreader
95353-1 PRO-CASTER Hopper Spreader
95353-2 PRO-CASTER Hopper Spreader
95353-3 PRO-CASTER Hopper Spreader
95354-1 PRO-CASTER Hopper Spreader
95354-2 PRO-CASTER Hopper Spreader
95355-1 PRO-CASTER Hopper Spreader
95424-1 Chute Assembly
95425-1 Chute Assembly
95426-1 Chute Assembly
95427-1 Chute Assembly
95755-1 POLY-CASTER™ Motor, 1/2 HP
95757-1 Conveyor Belt
95770-1 Belt Guard–Side
Lit. No. 29032, Rev. 04
Change
Changed to chain drive
Changed to Briggs & Stratton engine
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Converted to in-line chute (made offset chute obsolete)
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Changed to Briggs & Stratton engine
Converted to in-line chute (made offset chute obsolete)
Converted to in-line chute (made offset chute obsolete)
Converted to in-line chute (made offset chute obsolete)
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Converted to in-line chute (made offset chute obsolete)
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Changed to Briggs & Stratton engine
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Converted to in-line chute (made offset chute obsolete)
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Converted to in-line chute (made offset chute obsolete)
Changed to octagonal-shaped frame
Changed to octagonal-shaped frame
Changed to octagonal-shaped frame
Changed to octagonal-shaped frame
Converted to in-line chute (made offset chute obsolete)
Converted to in-line chute (made offset chute obsolete)
Baffl e change for Briggs & Stratton engine
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Changed to Briggs & Stratton engine
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Converted to in-line chute (made offset chute obsolete)
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Changed to Briggs & Stratton engine
Converted to in-line chute (made offset chute obsolete)
Changed to chain drive
Converted to in-line chute (made offset chute obsolete)
Removed output guards (no longer needed)
Removed output guards (no longer needed)
Removed output guards (no longer needed)
Removed output guards (no longer needed)
Changed motor to Canimex motor (SS)
Revised to 4 cleats
Revised to extend the whole length of the sill
54 July 1, 2009
MISCELLANEOUS
"Dashed" Kit Numbers
Part Description
95796-1 Pulley, 4.5" x .750 Bore
95847-1 Top Screen
95931-1 Poly Hopper Lid (DS)
95932-1 Poly Hopper Lid (PS)
96001-1 Poly Hopper Spreader
96380-1 Top Screen Brace
9825-1 Insta-Act ® LD Hydraulic Unit (2500 psi)
9828-1 Insta-Act EZ-V ® Hydraulic Unit
9828-2 Insta-Act EZ-V Hydraulic Unit
9828-3 Insta-Act EZ-V Hydraulic Unit
9828-4 Insta-Act EZ-V Hydraulic Unit
9835-1 Insta-Act MC Hydraulic Unit (3500 psi)
9840-1 Insta-Act RD/HD Hydraulic Unit (4000 psi)
9840-2 Insta-Act RD/HD Hydraulic Unit (4000 psi)
Change
Changed material to steel
Changed to fi ner mesh
Revised to include molded handles
Revised to include molded handles
Without spinner assembly
Threaded holes to accept wing bolts
Added low-friction rams, SAE porting, JIC hoses and fi ttings
Added new seals for double-acting rams
Added low-friction lift ram
Added low-friction rams, SAE porting, JIC hoses and fi ttings
Removed control
Added low-friction lift ram
Added low-friction lift ram
Added low-friction rams, SAE porting, JIC hoses and fi ttings
Lit. No. 29032, Rev. 04 55 July 1, 2009
Fisher Engineering
Rockland, ME 04841 www.fi sherplows.com
A SUBSIDIARY OF DOUGLAS DYNAMICS, L.L.C.
Copyright © 2009 Douglas Dynamics. L.L.C. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, fi lm or other distribution and storage media, without the written consent of Fisher Engineering. Authorization to photocopy items for internal or personal use by Fisher Engineering outlets or snowplow/spreader owner is granted.
Fisher Engineering reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifi cations used. Fisher Engineering or the vehicle manufacturer may require or recommend optional equipment for snow removal/spreaders. Do not exceed vehicle ratings with a snowplow/spreader. Fisher Engineering offers a limited warranty for all snowplows/spreaders and accessories. See separately printed page for this important information. The following are registered ( ® ) or unregistered (™) trademarks of Douglas Dynamics, L.L.C.: EZ-V ® , FISHER ® , Fish-Stik ® , Homesteader™, HT Series™,
Insta-Act
®
, INTENSIFIRE™, Minute Mount
®
, Minute Mount
®
2, POLY-CASTER™, POLY-CASTER™ II, PRO-CASTER™, ProTube™, SnoFoil
®
,
SPEED-CASTER™, SPEED-CASTER™ 2, SWING AWAY ® , XBLADE™, XLS™, XtremeV™.
Lit. No. 29032, Rev. 04
Printed in U.S.A.
July 1, 2009

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Minute Mount system
- Easy to use
- Durable
- Reliable
- Variety of models to choose from
- Wide range of applications
- Excellent customer support
- Safe and easy to operate