Livestrong LS5.0U Service manual

Add to My manuals
12 Pages

advertisement

Livestrong LS5.0U Service manual | Manualzz

LS 6.0R

SERVICE MANUAL

1

TABLE OF CONTENTS

CHAPTER 1: SERIAL NUMBER LOCATION

CHAPTER 2: CONSOLE OVERLAY AND WORKOUT DESCRIPTION

2.1 Console Description

2.2 Display Windows Description

2.3 Getting Started & Selecting a Workout

CHAPTER 3: TROUBLESHOOTING

3.1 Troubleshooting - No Power to the Console

3.2 Troubleshooting – Speed Do Not Display

3.3 Troubleshooting – No Hand Pulse Respond

3.4 Troubleshooting – Noise Issues

3.5 Troubleshooting – Speakers Issues

2

CHAPTER 1: Serial Number Location

The serial number is located on the front stabilize tube.

3

CHAPTER 2: Console Overlay and Workout Description

2.1 CONSOLE DESCRIPTION

4

2.2 DISPLAY WINDOWS DESCRIPTION

5

2.3 GETTING STARTED & SELECTING A WORKOUT

GETTING STARTED

1) Check to make sure no objects are nearby that will hinder the movement of the exercise bike.

2) Plug in the power cord.

3) You have the following options to start your workout:

A) QUICK START UP

Simply press START to begin working out. Time will count up from 0:00. The resistance level will default to level 1.

B) SELECT A STAGE

1) Use the PROGRAMMING BUTTON to select USER 1, USER 2 or GUEST and press ENTER

(LS6.0R, LS5.0U only). NOTE: if you press START before pressing ENTER, the stage will begin and counts up from 0:00 for the Manual (STA1) and Constant Watts (STA5) stages, and count down from 30:00 for all other stages. The level defaults to 1.

2) Select a stage using + / – and press ENTER on the PROGRAMMING BUTTON.

3) Select weight using + / – and press ENTER. (LS6.0R, LS5.0U ONLY)

4) Set time using + / – and press ENTER.

5) Select a level using + / – and press ENTER.

6) Press START to begin the stage.

6

DATE AND CLOCK SETUP (LS5.0U/LS6.0R ONLY)

1) Enter Setup mode: Press and hold the 2 and 4 keys for 3 seconds.

2) Use + / – on the PROGRAMMING BUTTON to change settings and press ENTER to confirm.

3) Settings include: Month, Day, Year, Hour, Minute, and AM/PM.

4) Review settings: You can review your settings at any time while in setup mode. Press ENTER to scroll through settings.

5) Exit setup mode: To confirm the date and time, press and hold ENTER for 3 seconds.

TO CLEAR SELECTION/RESET THE CONSOLE

Hold STOP key for 3 seconds.

FINISHING YOUR WORKOUT

When your workout is complete, the display will flash “WORKOUT COMPLETE” (LS5.0U/LS6.0R only) and beep. Your workout information will stay displayed on the console for 30 seconds and then reset.

7

CHAPTER 3: Troubleshooting

3.1 TROUBLESHOOTING – NO POWER TO THE CONSOLE

NO POW ER TO TH E CONSOL E

1) SYMPTOM:

a. The power switch is in the on position, but the console will not turn on.

2) SOLUTION:

a. The outlet the machine is plugged into is functional. Double check that the breaker has not tripped. b. The correct power cord is being used. Only use the power cord included or provided by

Customer Tech Support. c. The power cord is not pinched or damaged and is properly plugged into the outlet and the machine. d. Check to see if the connection of adapter is well. e. Remove the console and check to see if the console wire has good connected with the console. f. Remove the console mast and check to see if the console upper cable and console lower is connected well.

8

g. Remove the side cover and check to see if the wires are connected well.

9

CHAPTER 3: Troubleshooting

3.2 TROUBLESHOOTING –SPEED DO NOT DISPLAY

SPEED DO NOT DISPLAY

1) SYMPTOM:

a. The speed value do not display on console

2) SOLUTION:

a. Unplug power cord, remove the console and check that all connections to the console are secure and not damaged or pinched.

b. R emove the side cover and check to see if the sensor wire is connected well. c. Check to see if one corner of the sensor is aligned with the magnet and the distance is

2-4mm.

10

CHAPTER 3: Troubleshooting

3.3 TROUBLESHOOTING –

NO HAND PULSE RESPOND

NO HAND PULSE RESPOND

1) SYMPTOM:

a. The console did not display the heart rate during exercise

2) SOLUTION:

a. The user has to hold the sensor with both hands. b. Try to maintain moderate pressure while holding onto the heart rate Ęł handlebars.

c. Check to see if the wires connect with sensor is well.

11

CHAPTER 3: Troubleshooting

3.4 TROUBLESHOOTING –NOISE ISSUES

NOISE ISSUES

1) SYMPTOM:

a. Slapping / thunking / squeaking sound with each footstep.

2) SOLUTION:

a. Make sure that the exercise bike is on a level surface. b. Make sure that the console mast is tightly attached to the frame. c. Make sure that the front stabilize and rear stabilize are tightly attached to the frame.

3.5 TROUBLESHOOTING –SPEAKERS ISSUES

SPEAKERS ISSUES

1) SYMPTOM:

a. When MP 3 player is connected there is no sound coming from the speakers or the speakers sound fuzzy.

2) SOLUTION:

a. Make sure audio cable is plugged in securely to both the console and MP3 Player jacks.

12

advertisement

Related manuals

Download PDF

advertisement