Avery Weigh-Tronix WI 127 indicator Service Manual

The WI-127 indicator is a weighing device that can be used for a variety of applications. It has a variety of features, including multiple units of measure, programmable settings, and a variety of outputs. It also has a variety of options, including two additional serial ports, BCD parallel, 10 cutoffs, analog output, and Harmonizer digital filtering. The WI-127 can be calibrated using standard weights or by entering count values.

PDF Download
Document
WI-127 Indicator Service Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Seven configurable logic level inputs
  • Supports up to twelve 350-ohm weight sensors
  • Three outputs, open collector design (50ma sink)
  • Bi-directional serial port (RS-232 or RS-422/485 or 20mA current loop)
  • Eight digit, seven segment, 0.8-inch high LED display
  • NEMA 4X stainless steel enclosure
  • HarmonizerTM digital filtering
  • Fully programmable to ignore noise and vibration

Frequently asked questions

The WI-127 Indicator has seven configurable logic level inputs for functions such as PB tare, print, zero, units, select, gross and net. It also supports up to twelve 350-ohm weight sensors with 10 Volts DC excitation.

The WI-127 Indicator has three outputs, open collector design (50ma sink). It also has a relay power supply, 24 VDC at 150mA, and a bi-directional serial port (RS-232 or RS-422/485 or 20mA current loop).

The WI-127 Indicator has an eight digit, seven segment, 0.8-inch high LED display.

The WI-127 Indicator has a NEMA 4X stainless steel enclosure, making it suitable for demanding environments.

HarmonizerTM digital filtering is a feature of the WI-127 Indicator that allows it to ignore noise and vibration, providing a stable weight reading even in challenging conditions.

User questions

R R

John R.

How to access the WI-127's calibration menu?
Access the WI-127's calibration menu by removing the rear nylon plug and pressing the internal SEAL switch to enter the service menu.
R R

John R.

What types of calibration are supported by the WI-127?
The WI-127 supports weight and count calibration.
R R

John R.

Is it possible to modify calibration points on the WI-127?
Yes, calibration points on the WI-127 can be added or deleted.
Preparing document for printing…
0%