ENGINE - Hard Style Choppers
ENGINE
9
R
THREE YEAMILE
30,000
OR
ARRANTY
LIMITED W
RevTech® 110"
Looking for a powerful, dependable, beautiful motor to inject some
fresh muscle into your ride? Look no further than the RevTech® 110
from Custom Chrome. Our engineers and technicians spent thousands of
hours developing the RevTech® 110 with three major goals, high performance, exceptional reliability, and head-turning good looks.
Real world performance; it’s what we all need and what defines the
RevTech® brand. That’s why the RevTech® 110 was engineered to make
huge power, early and long. With an ideal bore and stroke combination of 4" by 4 3/8", we designed a wide power band for all occasions,
whether ripping through the gears or grabbing a handful to pass,
loaded down, riding two-up. With over 115 horsepower and 120 ft/lbs
of torque, you’ll have more than enough ponies for whatever type of
riding you do.
Out on the streets it’s far more fun to show off your ride than to explain
why it’s in the shop again. That’s why we’ve built the RevTech® 110
to be virtually indestructible. We began by designing new crankcases
and then created a new manufacturing process to make them! Next,
we developed flywheels and connecting rods forged from the most
advanced steel available. Even our new crank pin is special, it’s made of
aircraft grade roller bearing material, we would tell you more but then
we’d have to kill you!
If your bike hauls butt and doesn’t break, why shouldn’t it look great
too? When designing the RevTech® 110, we paid special attention to
making it the best looking motor available. Check out the blind case
bolts, flawlessly matched crankcase halves, and smooth crankcase-to-cylinder-base profile. And don’t forget the john reed design™ rocker boxes
and the machined fin edges on the barrels and heads. Who else sweats
the details like this?
This all adds up to what we believe is the best engine available for your
ride. What makes it all the more sweet is that the price is right and we
make it in three finishes to match your taste and your budget. So yank
that anemic Evolution® motor out of your frame and replace it with
some real muscle, RevTech® muscle.
Crankcases
• Cast from 356-T6 aluminum with wall thickness optimized for
maximum strength
• Advanced one-piece casting and machining techniques allow for near
perfect case half alignment
• Blind case bolts for cleaner appearance
• Smooth crankcase deck to cylinder base profile for cleaner appearance
• 7/16" cylinder studs proven in drag racing applications
Flywheels
• Connecting rods and flywheels forged from 4340 chromemoly
steel - the strongest material available for these applications
• Larger straight 1 1/2"-diameter pressed-in crankpin using RevTech®’s
proprietary extreme-duty military-grade steel
Oiling System
• The most advanced oil scavenging system produced yet for air-cooled
V-twin applications resulting in better reliability and increased
horsepower
• 3:1 ratio oil pump drive gears and high volume oil pump enable
significantly increased lubrication and cooling
• Piston cooling oil jets for better heat dissipation
Cylinders
• 4"-bore with 4 3/8"-stroke for ideal high torque/high
horsepower output
• More fin area for increased cooling
• Machined fin edges for better appearance
• Forged Wossner slipper-skirt pistons with moly coating
Heads
• New RevTech® roller rockers
• john reed design™ sculpted two-piece rocker boxes
• More fin area for increased cooling
• Machined fin edges for better appearance
Carburetion
• Mikuni HSR 45
• Intake manifold matched to heads for ideal flow efficiency
• Low profile air cleaner design for high performance while providing
improved rider comfort
Ignition
• Self contained solid-state ignition
Cam
• Andrews EV72 .560" lift cam for good performance and easy starting
658516 Natural aluminum finish . . . . . . . . . . .$5,399.99
658515 Black wrinkle finish. . . . . . . . . . . . . . . .$5,399.99
658517 Polished finish . . . . . . . . . . . . . . . . . . . .$5,999.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
658526 49-State Natural aluminum finish . .$5,599.99
658525 49-State Black wrinkle finish . . . . . . .$5,599.99
658527 49-State Polished finish . . . . . . . . . . . .$6,499.99
Please see cautionary information following page Ref.65
REVTECH 110 ENGINE
R
THREE YEAMILE
30,000
OR
ARRANTY
LIMITED W
The New RevTech® 100" 4x4
The engineers and technicians at RevTech® went back to the drawing
board to create our next generation 100" engine. We studied the latest
technology, combined that with expertise gained on the first RevTech®
100 project, and got down to the task at hand. The goal was simple; create the best all-around engine for the American V-Twin market!
Fortunately, the RevTech® design staff did not have to start from scratch.
We began with a solid foundation, the fire breathing RevTech® 110
power plant, and refined it further to produce a motor for most everyone. By shortening the stroke to 4", excellent balance with less vibration
was achieved. A positive side-effect of the shorter stroke was reduced
piston speed which increases reliability due to lowered stresses.
The 4" pistons pushed on these 4" strokes are a special story in themselves. RevTech® worked with Wossner to design unique moly-coated
forged pistons specifically for our engines. If you’re not familiar with
Wossner, here’s a bit of background, they make pistons for a little company called Porsche, among others!
Next we redesigned the heads. The bigger bore of the new 100 allowed
the use of larger valves, so the ports were also redesigned for better
flow. Smaller combustion chambers provide greater squish area for better turbulence and efficiency. In addition, roller rockers are employed
for better valve train reliability.
Many of the fine features of the RevTech® 110 were retained due to their
proven success. Pressed-together flywheels and our industry-first monoblock crankcases are still used for excellent reliability. Blind case bolts,
machined fin edges, and john reed design™ rocker boxes follow the
RevTech® tradition of making it work good, and look good. And loads of
horsepower and torque for all types of riding come standard.
So did we reach our goal of the best all-around engine on the market?
We think we did and believe you’ll agree. Remember, there are millions
of American V-Twin motorcycles on the road today; why not make yours
perform like one-in-a-million?
658531
658530
658532
Crankcases
• Cast from 356-T6 aluminum with wall thickness optimized for maximum strength
• Advanced one-piece casting and machining techniques allow for near
perfect case half alignment
• Blind case bolts for cleaner appearance
• Smooth crankcase deck to cylinder base profile for cleaner appearance
• 7/16" cylinder studs proven in drag racing applications
Flywheels
• Connecting rods and flywheels forged from 4340 chromemoly
steel - the strongest material available for these applications
• Larger, straight 11/2"-diameter pressed-in crankpin using RevTech®’s
proprietary extreme-duty military-grade steel
Oiling System
• The most advanced oil scavenging system produced yet for air-cooled
V-twin applications resulting in better reliability and increased horsepower
• 3:1 ratio oil pump drive gears and high volume oil pump enable
significantly increased lubrication and cooling
• Piston cooling oil jets for better heat dissipation
Cylinders
• 4"-bore with 4"-stroke for optimum power and reliability
• More fin area for increased cooling
• Machined fin edges for better appearance
• Forged Wossner slipper-skirt pistons with moly coating
Heads
• New RevTech® roller rockers
• john reed design™ sculpted two-piece rocker boxes
• More fin area for increased cooling
• Machined fin edges for better appearance
Carburetion
• Mikuni HSR 42
• Intake manifold matched to heads for ideal flow efficiency
• Low profile air cleaner design for high performance while providing
improved rider comfort
Ignition
• Self contained solid-state ignition
Cam
• Andrews EV72 .560" lift cam for good performance and easy starting
Natural aluminum finish . . . . . . . . . $5,399.99
Black wrinkle finish . . . . . . . . . . . . . $5,399.99
Polished finish . . . . . . . . . . . . . . . . . . $5,999.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
658536
658535
658537
49-State Natural aluminum finish $5,399.99
49-State Black wrinkle finish . . . . . $5,399.99
49-State Polished finish . . . . . . . . . . $5,999.99
Please see cautionary information following page Ref.65
REVTECH 100 4X4 ENGINE
R
THREE YEAMILE
30,000
OR
ARRANTY
LIMITED W
RevTech® 88" with TÜV
The original RevTech® 88 was launched more than five years ago and
has been a tremendous success. But we didn’t rest on our laurels, we
constantly improved it and now it’s better than ever. Our engineers and
technicians have taken the knowledge accumulated while developing
our new 110 and 100 and applied it to the 88. As a result, the RevTech®
88 now makes about 50% more power than the motors from Milwaukee
with comparable reliability.
Like the bigger RevTech® motors, the 88’s new cases are now cast in one
piece. They are machined then precision cut with the halves kept as a
pair. This new method ensures perfect alignment of the flywheels on the
inside, with the added benefit of a better appearance on the outside.
The improvements didn’t stop with the cases, the flywheels now feature
straight 11/2" pressed-in crankpins using our proprietary extreme-duty
military-grade steel, just like in our 110 and 100. The new flywheels are
forged from 4340 chromemoly steel and the new connecting rods
incorporated from the larger motors have proven indestructible.
We will continue to improve our engines as we find new technology that
proves itself in our vigorous testing. But know this, the RevTech® 88 has
the accumulated experience and knowledge behind it of the over 20,000
RevTech® motors sold so far. We are proud of it, and confident that you
will be too, as you enjoy each powerful, trouble-free mile.
O-Ring Head Gasket with
Wider-Spaced Head Bolts
for a Fail-Proof Head-toCylinder Seal
Steel Cylinder Liners are PermaLocked into the Aluminum
Outer Casting for the Ultimate
in Durability
Crankcases
• Cast from 356-T6 aluminum with wall thickness optimized for
maximum strength
• Advanced one-piece casting and machining techniques allow for near
perfect case half alignment
• Blind case bolts for cleaner appearance
• Smooth crankcase deck to cylinder base profile for cleaner appearance
• 7/16" cylinder studs proven in drag racing applications
Flywheels
• Connecting rods and flywheels forged from 4340 chromemoly
steel - the strongest material available for these applications
• Larger straight 11/2"-diameter pressed-in crankpin using RevTech®’s
proprietary extreme-duty military-grade steel
• 41/4"-stroke and 35/8"-bore
Oiling System
• Late style external pump for improved efficiency and increased volume
• Chrome cover
Cylinders
• Improved design with more fins overall, and longer fins in certain
high-heat areas for better cooling
• Steel liners are Perma-Locked into the outer aluminum castings
• Cast pistons
• O-ring base seals instead of gaskets
Heads
• D-shaped exhaust ports for maximum flow and performance
• Wider-spaced head bolt pattern for increased strength
• O-ring head seals instead of gaskets for increased reliability
Carburetion
• Mikuni HSR42
• Intake manifold is closely matched to the port for maximum flow
Ignition
• Self contained solid-state ignition
Cam
• .495" lift for good torque across the rpm range
88" Engines with TÜV Approval
58500 Black wrinkle finish. . . . . . . . . . . $4,999.99
58501 Natural aluminum finish . . . . . . $4,999.99
58503 Polished finish . . . . . . . . . . . . . . . $5,599.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
REVTECH 88 ENGINE
REVTECH ENGINE SERVICE PARTS
ENGINE
9
Service Parts for RevTech® Engines
Genuine RevTech® replacement parts for RevTech® 88" and 100" complete engines and unassembled engine kits.
Air and Oil Filters
58284 RevTech® air filter for the new, thinner air cleaner
assemblies on 110", 100" 4x4, and 88" engines . . . . . . . . . .$29.99
25022 K&N air filter for early-style RevTech® air cleaner
housings with integral backing plate . . . . . . . . . . . . . . . . . . . .$48.99
25023 K&N air filter for late-style RevTech® air cleaner
housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.99
35078 RevTech magnetic oil filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99
Gaskets and Seals
658510 Complete engine gasket, seal & O-ring kit for RevTech®
100" and 88" engines with 97/98 Casting Marked
Rocker Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.99
658511 Complete engine gasket, seal & O-ring kit for RevTech®
100" and 88" engines with 99/00 Casting Marked
Rocker Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99
658512 Complete engine gasket, seal & O-ring kit for RevTech®
110" engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72.99
658513 Top end gasket, seal & O-ring kit for RevTech®
110" engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99
59784 Sump-plate gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.99
54095 Rocker box cover rubber gasket set for rocker box covers
with casting marks of ‘97’ or ‘98’ . . . . . . . . . . . . . . . . . . . . . . . .$31.99
Note: Rocker box covers with other casting marks use rubber gaskets for late Sportster®
models.
Replacement Cams
58230 RevTech ‘50’ cam for 88" RevTech® engines . . . . . . . . . . . . .$129.99
58235 RevTech ‘100’ cam for 100" RevTech® engines . . . . . . . . . . .$129.99
Replacement Piston for 88" RevTech® Engines
Includes cast piston, wristpin and clips. Sold each.
58807 35/8" (std. size) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$134.99
Replacement Pistons for 100" RevTech® Engines
Includes forged pistons, wristpins and clips (pairs). . . . . . . . . . . . . .$269.99
49546
313/16" (std. size) 49549 +.020" oversize
49547
+.005" oversize
49539 +.030" oversize
49548
+.010" oversize
Replacement Rings for 100" RevTech® Engines
Complete ring set for one piston. Sold each. . . . . . . . . . . . . . . . . . . . .$20.99
58245
313/16" (std. size) 58247 +.010" oversize
58246
+.005" oversize
58248 +.020" oversize
Replacement Cylinders for 88" RevTech® Engines
51122
Polished 35/8" front cylinder . . . . . . . . . . . . . . . . . . . . . . . . .$299.99
51123
Polished 35/8" rear cylinder . . . . . . . . . . . . . . . . . . . . . . . . . .$299.99
51124
Natural 35/8" front cylinder . . . . . . . . . . . . . . . . . . . . . . . . . .$199.99
51125
Natural 35/8" rear cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.99
51126
Black 35/8" front cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . .$214.99
Replacement Cylinders for 100" RevTech® Engines
51128
Polished 313/16" front cylinder . . . . . . . . . . . . . . . . . . . . . . . .$285.99
51129
Polished 313/16" rear cylinder . . . . . . . . . . . . . . . . . . . . . . . . .$285.99
51130
Natural 313/16" front cylinder . . . . . . . . . . . . . . . . . . . . . . . .$249.99
51131
Natural 313/16" rear cylinder . . . . . . . . . . . . . . . . . . . . . . . . .$249.99
51132
Black 313/16" front cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . .$214.99
51133
Black 313/16" rear cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . .$214.99
Replacement Engine Cases for 88" and 100" RevTech® Engines
659000 Natural . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,059.99
659001 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,099.99
659002 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,149.99
Replacement Rings for 88" RevTech® Engines
Complete ring set for one piston. Sold each. . . . . . . . . . . . . . . . . . . . .$20.99
58240
35/8" (std. size)
58243 +.020" oversize
58241
+.005" oversize
58244 +.030" oversize
58242
+.010" oversize
9.08
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
XZOTIC ENGINES
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
R
THREE YEAMILE
EXHAUST
30,000
OR
ARRANTY
LIMITED W
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
Xzotic™ 100" 4x4 and 110" Engines
A modern engine with a retro look. Xzotic™ engines are RevTech®
engines that have been assembled using our popular Xzotic™ generatorstyle cam covers, distributors and either Panhead or Knucklehead rocker
covers. Each engine comes completely assembled, ready to bolt into your
bike. They come in polished, black, and natural finishes. Polished and
black engines come with highly polished Xzotic™ components, while our
natural comes with semi polished for a tougher look. Compatible with
Original Equipment and custom frames that accept Evolution® engines.
SHEETMETAL
GAUGES
Xzotic™ Panhead Engines
658722 Natural 100" 4x4 . . . . . $7,799.99
658713 Black 100" 4x4 . . . . . . . $7,799.99
658712 Polished 100" 4x4 . . . . $8,599.99
658721 Natural 110" . . . . . . . . . $7,799.99
658717 Black 110" . . . . . . . . . . . $7,799.99
658716 Polished 110" . . . . . . . . $8,599.99
Xzotic™ Knucklehead Engines
658724 Natural 100" 4x4 . . . . . $7,799.99
658715 Black 100" 4x4 . . . . . . . $7,799.99
658714 Polished 100" 4x4 . . . . $8,599.99
658723 Natural 110" . . . . . . . . . $7,799.99
658719 Black 110" . . . . . . . . . . . $7,799.99
658718 Polished 110" . . . . . . . . $8,599.99
CHEMICALS
GENERAL
Note: Custom exhaust headers must be fabricated when using these motors. Models with floorboards may
require modification.
WWW.CUSTOMCHROME.COM
9.09
CROSS
REFERENCE
JAMMER PANDEMONIUM ENGINES
6 Month
LIMITED Y
WARRANT
ENGINE
9
The ‘Pandemonium’ Engine by Jammer®
Big enough to provide good power, yet still kickstart friendly. Every part
was hand-picked for quality... first! Bottom to top, from the S&S® timing
and idler gears to the JIM’S® pinion, to the Motorway automatic advance
distributor, and back to S&S® pistons! Naturally, there’s a RevTech® crankshaft with heavy-duty connecting rods working in harmony with STD®
crank-cases and heads. Evolution® style hydraulic tappets were installed in
JIM’S® Big Axle tappet bodies. An Andrews® cam was chosen be-cause of it’s
perfectly matched design qualities for use in these 88" generator-style engines. Even
the Rowe™ valve guides and Andrews® valve springs and collars, are coddling one-piece
RevTech® stainless steel valves that were hand-picked for the best quality, best performance
and a trouble-free combination.
The Pandemonium includes these special features:
• Sprocket shaft design that lets you use either 4 or 5-speed
transmissions
• Dual-plug STD heads with O-ring sealed intake ports and exhaust
port flanges
• Heavy-duty crankcases with generator and/or alternator charging
system capability
• Superior lubrication with modified top end oil routing
and end oiler pinion shaft design
• RevTech® 35/8" bore cast iron cylinders
• Forged 8.25:1 compression pistons
• S&S Super ‘E’ Carb
• Andrews .470" lift, ‘AB’ grind cam for power you can use!
02208 Chrome (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,299.99
Pandemonium Black Edition
The same original engine with a number of added features.
New black powder coated billet aluminum parts
• Pan cover with groves
• Oil pump
• Cam cover with groves
• Oil filter bracket
• Push rod covers
• Generator bottom housing
• Tappet blocks
02206 Black (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,299.00
9.10
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
JAMMER 88 SHOVELHEAD ENGINES
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ONE YEAMRILE
658702
ENGINE
10,000
OR
ARRANTY
LIMITED W
GASKETS
TRANNY
& CLUTCH
658700
DRIVELINE
Jammer™ 88" Shovelhead Engines
These 88 cubic inch Jammer Shovelhead engines are available in either generator or alternator bottom end versions. They’re big enough to provide good power, but still kickstart friendly. Engines come fully assembled and feature an S&S Super “E” carb. Generator style engine comes with a
Mallory distributor while the Alternator style engine comes with a RevTech electronic ignition. Every part was hand-picked for quality and reliability,
and backed by a 1 year, 10,000 mile limited warranty. Features Evolution® style hydraulic lifters. A great engine to use when building your retro ride!
658700 Jammer™ Alternator Shovelhead engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,399.99
658702 Jammer™ Generator Shovelhead engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,979.99
The Jammer Shovelheads include these special features:
Displacement / Bore / Stroke . . . 1442cc / 3 5/8" / 4 1/4"
Crankpin Diameter . . . . . . . . . . . 1.50"-diameter Straight
Crankpin Bearings . . . . . . . . . . . . 19 Per Cage
Rod Length . . . . . . . . . . . . . . . . . 7.440"
Flywheel Diameter . . . . . . . . . . . 8.5" Pressed Together
Pistons . . . . . . . . . . . . . . . . . . . . . Keith Black Pistons
Cylinders . . . . . . . . . . . . . . . . . . . Cast Iron 3 5/8"-Bore
Cam . . . . . . . . . . . . . . . . . . . . . . . Andrews
Valve Train . . . . . . . . . . . . . . . . . . Manley Race Master Valve Kit
Rocker Arms. . . . . . . . . . . . . . . . . Stock Style Shovelhead
Carburetor . . . . . . . . . . . . . . . . . . S&S ‘Super E’ With O-Ring Manifold
Cylinder Heads. . . . . . . . . . . . . . . STD 3 5/8"-Big Bore 2 Plugs Per Head
Engine Cases . . . . . . . . . . . . . . . . STD 3 5/8"-Big Bore Cases
Rocker Boxes . . . . . . . . . . . . . . . . Chrome
Oil Pump . . . . . . . . . . . . . . . . . . . RevTech®
Oil Pump Speed . . . . . . . . . . . . . . 4:1
Oil Pump Gears . . . . . . . . . . . . . . 14-tooth
Generator Engine Ignition . . . . . Mallory Distributor
Alternator Engine Ignition . . . . . RevTech® Electronic Ignition
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
SHEETMETAL
GAUGES
CHEMICALS
GENERAL
WWW.CUSTOMCHROME.COM
9.11
CROSS
REFERENCE
TP ENGINEERING PRO SERIES ENGINES
687306
687305
ENGINE
9
TP Pro-Series® Complete Engines
TP Engineering uses their own American forgings and castings, and
precision machines all components in their Connecticut factory for each
Pro-Series® engine. All engines have the new Pro-Series® cylinder heads
featuring their exclusive MegaTorque intake port and detonation-free
combustion chamber, along with all the innovations you’ve come to
expect from TP Engineering: the patented Smart Pump that routes oil
to the oil filter before it enters the engine and delivers a constant flow
of oil to the top-end and bottom-end of the engine at all times;
remote-mounted single-fire ignition with crankshaft-position
sensor means no more timing lights; patented Pro-Vent® chromed
billet rocker boxes; Scramjet air cleaner; 7075-T6 billet lifter blocks;
forged coated pistons; two-piece billet cam cover; push-button
compression releases; forged steel roller rocker arms; and Mikuni
45mm carburetor.
TP engines are available in polished and show-polished finishes. Polished engines have polished crankcases, lifter blocks, cylinder bases, cylinder fin edges, cylinder head fin edges and spark
plug areas. Show-polished engines have polished crankcases, lifter blocks, cylinder bases, as well as
complete polishing of cooling fins on cylinders and heads, polished intake manifold and carburetor.
Features include:
• Pro-Series® Chromed Billet Rocker Boxes
• Pro-Series® Forged Roller Rocker Arms
with patented Pro-Vent® Technology
• Pro-Series® Patented Billet Oil Pump
• Pro-Series® Cylinders
• Pro-Series® Crankcases
• Pro-Series® Polished Billet Lifter Blocks
• Pro-Series® Cylinder Heads
• Pro-Series® Forged Pistons and Rings
• Pro-Series® Flywheels
• Pro-Series® Stainless Steel Valves
• Pro-Series® Connecting Rods
• Pro-Series® Valve Springs
• Pro-Series® Pinion and Sprocket Shafts
• Pro-Series® Chrome Billet Cam Cover
687299
687300
687302
687303
687305
687306
680299
680300
9.12
114" Polished engine (4.125"-bore x 4.250"-stroke) . . . . $7,999.99
114" Show Polished engine
(4.125"-bore x 4.250"-stroke) . . . . . . . . . . . . . . . . . . . . . . . . . $9,299.99
121" Polished engine
(4.125"-bore x 4.50"-stroke) . . . . . . . . . . . . . . . . . . . . . . . . . . $8,299.99
121" Show Polished engine
(4.125"-bore x 4.50"-stroke) . . . . . . . . . . . . . . . . . . . . . . . . . . $9,599.99
124" Polished engine
(4.125"-bore x 4.625"-stroke) . . . . . . . . . . . . . . . . . . . . . . . . . $8,399.99
124" Show Polished engine
(4.125"-bore x 4.625"-stroke) . . . . . . . . . . . . . . . . . . . . . . . . . $9,599.99
114" EPA Polished engine
(4.125"-bore x 4.250"-stroke) . . . . . . . . . . . . . . . . . . . . . . . . . $7,999.99
114" EPA Show Polished engine
680302
680303
680305
680306
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
• Pro-Series® Single-Fire Ignition System
• Pro-Series® Adjustable Chromemoly
Pushrods
• Pro-Series® Special-Grind Camshaft
• Pro-Series® Compression Releases
• Mikuni® 45mm HSR Series Carburetor
(4.125"-bore x 4.250"-stroke) . . . . . . . . . . . . . . . . . . . . . . . . . $9,399.99
121" EPA Polished engine
(4.125"-bore x 4.50"-stroke) . . . . . . . . . . . . . . . . . . . . . . . . . . $8,299.99
121" EPA Show Polished engine
(4.125"-bore x 4.50"-stroke) . . . . . . . . . . . . . . . . . . . . . . . . . . $9,599.99
124" EPA Polished engine
(4.125"-bore x 4.625"-stroke) . . . . . . . . . . . . . . . . . . . . . . . . . $8,399.99
124" EPA Show Polished engine
(4.125"-bore x 4.625"-stroke) . . . . . . . . . . . . . . . . . . . . . . . . . $9,594.99
Please see cautionary information following page Ref.65
S&S ENGINES
INDEX
APPAREL
S&S 124” FUEL INJECTED ENGINES
Complete fuel injected T124 engines for 1999-’06
models come with the S&S Variable Fuel Injection
(VFI) Module and S&S single bore induction
system with a teardrop air cleaner. Engines
can easily be upgraded to S&S single bore
tuned induction with a simple bolt-on
induction kit. (See page 5-24 for more
information) The VFI system included with
each fuel injected engine, comes with closed
loop sensors and the complete S&S ProTune II
software package. Delphi® style systems also
include knock sensors and break-in rev limiting to
protect your engine from damage. Base maps for
T124 engines with the most common exhaust systems
are available on the software CD and from the S&S
website. However, it is recommended that the VFI
System be fine tuned at an S&S VFI Tuning Center.
Since we have added the S&S Closed Loop Sensor Kit
to all VFI equipped engines, tuning is much easier
and the amount of dyno time required to fine tune
the engine is greatly reduced.
614573 Natural . . . . . . . . . . . . . . . . . . . . . . . . . . . $9264.99
614574 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9589.99
614575 Polished . . . . . . . . . . . . . . . . . . . . . . . . . $10589.99
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
NEW S&S V107T ENGINE
A big horsepower number at 7000 rpm will not help a loaded bagger
merge with interstate traffic on a short on-ramp. Lots of torque at 3000
rpm will do quite nicely. The V107T Touring Special satisfies the needs
of the performance minded touring rider with a healthy displacement,
a relatively short 41/4” stroke, but large 4.000” bore. The result is a performance engine with characteristics that are ideal for touring. It is also
pretty important that a tank of bad gas will not result in a bad trip. The
moderate 9.5:1 compression ratio allows the V107T to pull heavy loads
with little or no detonation, and to tolerate sub-standard gasoline on
occasion without engine damage. All S&S V107T engines come with billet gear cover and billet tappet guides.
1984-1999 Carbureted Engines with IST Ignition
614587 Natural . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6409.99
614589 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6734.99
614591 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7509.99
Engines
614588
614590
614596
with Super Stock Ignition
Natural . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5994.99
Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6319.99
Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6944.99
FORKS
& SHOCKS
SHEETMETAL
S&S 49-STATE EPA
CERTIFIED ENGINE PACKAGE
GAUGES
S&S Cycle is pleased to introduce the first of their EPA certified engine
packages for new builds in custom 1984-’99 style big twin chassis.
The 96’’displacement come’s in natural, black, and polished finishes.
Certified engines available in this first offering are for carbureted
models only and include an S&S ignition system. The 96” engine comes
with the S&S Super Stock® ignition. All engines include an installation
manual, a service manual, and Mobil 1® motor oil.
614598 Natural . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6014.99
614599 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6339.99
614600 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7114.99
WWW.CUSTOMCHROME.COM
9.13
CHEMICALS
GENERAL
CROSS
REFERENCE
S&S ENGINES
S&S 124" Super Sidewinder™ Plus Engines for Evolution® Models
601732
If you’re looking for the most powerful production replacement engine available for
your Evolution® model, your search ends here. With its 41⁄8"-bore and 45/8"-stroke pushing high-compression 10.8:1 forged pistons, the 124" SSW+ has become the most popular S&S engine since its introduction. Not just because it is big, but because it makes
unbelievable power. This engine will fit in a stock H-D® frame, but the performance
is anything but stock. This engine is recommend only for experienced riders who are
seeking the ultimate in street performance. Other standard features on these engines
include S&S “Super G” carburetors, S&S 640 cams, S&S High Volume High Pressure
(HVHP) oil pumps, S&S electric compression releases, piston cooling oil jets, chromeplated die-cast rocker covers, roller rocker arms, billet tappet guides and a special billet
gear cover. Not recommended for kickstart applications.
Engines with IST Ignition
Engines purchased with the S&S IST ignition will receive a three year warranty because
S&S is so confident that this ignition will prevent damage to the engine due to knock
or detonation.
601730 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,445.00
601731 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,770.00
601732 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,545.00
Engines with Super Stock Ignition
Engines purchased with the S&S Super Stock ignition will receive a two year warranty.
601685 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,955.00
601686 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,280.00
601687 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,055.00
ENGINE
9
601707
601737
S&S 96" Engines for Evolution® Models
The old timers at S&S remember when they started producing engine
packages. Back then, the 96" engine for Evolution® models with its
35⁄8"-bore, was the “king.” Everyone loved the 96" because it made
great power, it was reliable, engine life was exceptional, and being
essentially stock height, it fit well in a stock frame. Well, time moves on.
If you’re looking to replace a worn-out Original Equipment Evolution®
engine with something a bit more potent, you still can’t beat an S&S
96" engine. To make it an even better value, it has been updated with
the new S&S 585 camshaft for even better performance and reliability. The S&S 96" has a 45/8"-stroke to complement the 35/8"-bore and
10.1:1 high-compression forged pistons. All of these engines come with
chrome-plated rocker covers, roller rocker arms and a “Super E” carburetor in addition to the S&S billet tappet guides and gear cover. Not
recommended for kickstart applications.
Engines with IST Ignition
Engines purchased with the S&S IST ignition will receive a three year
warranty because S&S is so confident that this ignition will prevent
damage to the engine due to knock or detonation.
601736 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,250.00
601737 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,575.00
601738 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7,350.00
Engines with Super Stock Ignition
Engines purchased with the S&S Super Stock ignition will receive a two
year warranty.
601676 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5,590.00
601677 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5,915.00
601678 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,690.00
9.14
S&S 113" Engines for Evolution® Models
The S&S 113", 4"-bore engines have been on the scene for about five
years and although they are no longer the biggest production engine
S&S offers, they still are very popular because they have many features
that riders and builders really like. The 113 is actually shorter than a
stock Evolution® engine by about .050", which makes it easy to fit into
any stock 1984 thru 1999 frame, and engine life and dependability are
better than you might expect from an engine this large. Some standard
features of the 113 that make it a good choice are: a 4"-bore with a
41/2"-stroke pushing high-compression 10.1:1 forged pistons, an S&S 600
cam, chrome-plated die-cast rocker covers, billet tappet guides and gear
cover, S&S roller rocker arms, S&S electric compression releases, the S&S
High Volume High Pressure (HVHP) oil pump, and an S&S “Super G” carburetor. Not recommended for kickstart applications.
Engines with IST Ignition
Engines purchased with the S&S IST ignition will receive a three year
warranty because S&S is so confident that this ignition will prevent
damage to the engine due to knock or detonation.
601705 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,945.00
601706 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7,270.00
601707 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8,045.00
Engines with Super Stock Ignition
Engines purchased with the S&S Super Stock ignition will receive a two
year warranty.
601680 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,465.00
601681 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,790.00
601682 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7,565.00
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
S&S ENGINES
S&S Complete 93"
Shovelhead Engines
601734
S&S 124" Engines for
Twin Cam 88® Models
This year S&S introduces a truly complete 124" engine
for Twin Cam 88® models. With a bore diameter of 41/8"
and a stroke of 45/8", they feature the super-strong S&S
crankcases which have extra section thickness in key stress
areas, and a Timken® sprocket shaft bearing for superior
strength and load capacity. To that solid foundation are
added S&S’s legendary flywheels and connecting rods, S&S
640G gear drive cams, high-compression 10.8:1 forged
pistons, S&S cylinder heads, roller rocker arms, chromeplated die-cast rocker covers, electric compression releases, and S&S “Super G” carburetors with “Desperado”
air cleaner covers. To complete these engines, billet oil
pumps, tappet guides, and gear covers have been added
in addition to the S&S Intelligent Spark Technology knock
sensing ignition. Engines purchased with the S&S IST ignition will receive a two year warranty because S&S is so
confident that this ignition will prevent damage to the
engine due to knock or detonation. Not recommended
for kickstart applications.
601733 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,845.00
601734 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,170.00
601735 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10,645.00
Note: These engines do not have counterbalancers, and the IST module is not
compatible with the wiring on 2004-up Harley-Davidson® models. Please also
note that these engines are not intended to be installed in chassis where the
oil tank is located higher than the engine.
Completely assembled,
and feature bulletproof crankcases,
flywheels, cylinders
and heads, and finish
the engine with their new
premium valve train components. S&S billet gear
cover, tappet guides, and
rocker boxes look outstanding,
and offer the kind of performance
you have come to expect from S&S.
The new tappet guides are designed
around the quiet and dependable
tappets installed in Evolution®
Big Twin engines. Corrected
tappet guide bore geometry
assures proper valve timing using
cams styled after those found in
Evolution® engines. The unique
adjustable pushrods are collapsible
for easy removal and installation, but
are stronger than their older counterparts. Inside the billet rocker covers are S&S’s
straight rocker shafts and the new S&S
forged roller rocker arms (also available separately). The
result is Shovelhead engines with the kind of quiet power
that some folks may just have a hard time believing, and
they are covered by a two year warranty!
A new addition is the 93" ‘Alternator/Generator’ engine.
This is the perfect engine for that “Retro” build, but with
a modern alternator charging system. In addition, its latestyle sprocket shaft permits the use of 5 and 6 speed transmissions for additional functionality.
CC #601740 is an Alternator Shovelhead engine with 8.2:1
compression cast pistons, 35/8"-bore, 41/2"-stroke, an S&S
585 cam, billet gear cover, updated cam and tappets, and a
new Super Stock ignition system.
CC #601741 is an Alternator/
Generator Shovelhead
engine with 8.5:1 compression cast pistons,
35/8"-bore, 41/2"-stroke,
an S&S 585 cam, cast
gear cover, updated cam
and tappets, a new Super
Stock ignition system and
stock rotation cam drive
gears. It requires use of a
stock or custom 1966 thru 1969
exhaust system.
601740 Natural finish alternator
engine . . . . . . . . . . . $7,395.00
601741 Natural finish alternator/generator engine
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
601740
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
601741
WHEELS,
TIRES
& BRAKES
FRAMES
. . . . . . . . . . . . . . $8,100.00
FORKS
& SHOCKS
SHEETMETAL
S&S Complete 103" Shovelhead Engine
Based on the long-standing 103" Shovelhead Sidewinder™ kit, which has been in the
S&S catalog since 1976. The 103 is similar to the other S&S Shovelhead engines, just
bigger, thanks to its 5"-bore and the S&S 640 camshaft. It features S&S Super Stock™
crankcases, S&S forged steel flywheels and connecting rods, S&S billet tappet guides
updated with tappets similar to those used in Evolution® Big Twin engines, S&S
Quickee pushrods, S&S billet rocker boxes, S&S forged roller rocker arms, and 35⁄8"bore, engineering grade, cast iron cylinders with forged pistons that yield a compression ratio of 10.7:1. Due to the displacement and compression ratio, an S&S “Super
G” carb and S&S dual plugged heads come as standard equipment in addition to the
new Super Stock ignition system. The 103 is only offered as a 1970 thru 1984 alternator engine and features a billet cam cover. Covered by a two-year warranty.
601742 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7,480.00
WWW.CUSTOMCHROME.COM
GAUGES
CHEMICALS
GENERAL
9.15
CROSS
REFERENCE
S&S HOT SET UP KITS . OIL FILTERS
S&S 124” HOT SET UP KIT
The 124" Hot Set Up Kit are available. The first, which is
highly recommended, features S&S 91cc Super Stock® cylinder heads and a compression ratio of 10.8:1. This kit will
provide the best performance and easy starting thanks to the
S&S electric compression releases. The Heads are machined
to accept them. The second version contains a dished Piston
designed to provide a 10.8:1 compression ratio with stock
cylinder heads. There are a several advantages to installing
this kit as opposed to installing a Complete 124" S&S engine.
The first advantage is that you don’t have to pay for a complete engine! Many of the stock engine components such as
the crankcases, Oil pump, cam cover, and tappets are reused,
saving hundreds of dollars. Also, S&S does not offer complete
engines to replace Twin Cam 88B™ engine. Another consideration is that since the stock crankcases are used, the engine
will retain the Original serial numbers. This could mean less
hassle with registration and insurance.
1999-2006 Twin Cam 88B
614576 Natural W/ Stock Heads . . . . . . . . . . . . . . . . . . . . . $3584.99
614577 Black W/ Stock Heads . . . . . . . . . . . . . . . . . . . . . . . $3669.99
614578 Natural W/ Super Stock Heads . . . . . . . . . . . . . . . $5384.99
614579 Black W/ Super Stock Heads . . . . . . . . . . . . . . . . . $5554.99
1999-2006 Twin Cam 88
614580 Natural W/ Stock Heads . . . . . . . . . . . . . . . . . . . . . $3539.99
614593 Black W/ Stock Heads . . . . . . . . . . . . . . . . . . . . . . . . $3624.99
614594 Natural W/ Super Stock Heads . . . . . . . . . . . . . . . $5324.99
614595 Black W/ Super Stock Heads . . . . . . . . . . . . . . . . . $5494.99
9
S&S 106” HOT SET UP KITS
ENGINE
S&S 106" Hot Set Up Kit for Harley-Davidson® Twin Cam 88®
engines delivers real performance gains at a reasonable price,
and does not require any crankcase modifications which makes it
economical to install. In addition you can use your existing stock
cylinders which keeps the cost down even more.
The heart of this 106" Hot Set Up Kit is a set of S&S stroker flywheels. The 41⁄2" stroke flywheels together with the 37⁄8" bore
forged 9.8:1 pistons, purchased separately, boost the displacement of a stock engine to 106" with no crankcase modifications.
The high flowing S&S Super Stock® cylinder heads and 585 gear
drive cams allow the engine to get enough air to make some
real power. The kit also includes S&S rocker covers, S&S electric
compression releases, S&S chromemoly pushrods, and all required
gaskets and seals. Fuel system must be purchase separately.
1999-2006 Twin Cam 88 except 2006 Dyna
614569
614570
Natural . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3994.99
Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4079.99
1999-2006 Twin Cam 88B
614571
614572
Natural . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4034.99
Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4119.99
S&S Oil Filters
S&S oil filters are constructed in a sturdy steel canister which houses the finest filtering media and internal components available. The canister is slightly smaller in diameter than stock filters to make them easier to remove
and install. S&S filters are available in black or chrome finish.
Nearly all oil filters are equipped with a bypass valve to keep oil flowing even when it can’t go through the filter
media quickly enough, on cold starts for example. S&S filters are designed with a direct bypass valve that routes
bypass oil directly to the filter exit. Direct bypass minimizes the amount of contaminants carried to the engine in
the unfiltered bypass oil since the oil is not allowed to pick up contaminants by flowing over the "dirty" side of
the filter media, as it is in some competitive filters.
Model Years 1984-1999
614583 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.45
614584 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.95
Model Years 1999-up
614585 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.45
614586 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.95
9.16
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
S&S HOT SET UP KITS
INDEX
APPAREL
SEATS
& BAGS
45957
FOOT
CONTROLS
HAND
CONTROLS
021090
and
45888
LIGHTING
S&S 84" Hot Set Up Kit for Shovelheads
S&S 93" Hot Set Up Kits for Shovelheads
Take the guess work out of machining your mill with these Hot Set Up
kits from S&S. Backed by S&S’s trademark research and testing, this kit
yields 93 cubic inches with an approximate 8.75:1 compression ratio.
Contents include:
• Balanced 41/2"-stroker flywheel assembled with heavy-duty connecting rods and shafts and trued to within .0005" lateral runout
• 35/8"-bore cylinders with matching pistons including rings, wristpins
and retainers
• ‘495’ camshaft, adjustable chromemoly pushrods with adapter cups
and heavy-duty valve springs with aluminum retainers
• Super “E” carburetor with special manifold and chrome teardrop air
cleaner assembly
• Heavy-duty top engine bracket, assembly lube and instructions
included
45957 Fits Big Twins with 3 gallon tanks from 1970-early 1978 (kit will
not fit chassis with 5 gallon tanks). . . . . . . . . . . . . . . . . . . . . . $2,474.95
45958 Fits Big Twins with 3 gallon tanks from late 1978-early 1981 (kit
will not fit chassis with 5 gallon tanks) . . . . . . . . . . . . . . . . . $2,469.95
Take the guess work out of machining your mill with this Hot Set Up
kit from S&S. It yields 84 cubic inches with an approximate compression
ratio of 8:1 in Panheads and 8.25:1 in Shovel-heads when used with the
CC #45888 cast piston kit (must be purchased separately). It includes
41/2" stroker flywheels with shafts and rods installed, a ‘514’ cam kit, a
Super “E” carb kit and installation instructions.
021090 Fits Panhead and Shovelheads from 1970-early 1978 (cylinders
and pistons not included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,774.95
45888
Cast piston and ring kit for CC #021090 . . . . . . . . . . . . . . . . $249.95
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
Custom Chrome sets the bar as the first
distributor in the world to take the initiative and
attend S&S Product Training
Sixteen reps from across the U.S. and Europe attended the course in
La Crosse, WI. The product training is modeled after the certification
training offered to S&S Dealers. The course provides an overview of
Proven Performance® S&S Engines and components, maintenance
and a feel for the level of expert instruction dealers receive during
standard certification courses.
“Our team was really fired up to be at S&S. This knowledge
differentiates us in the marketplace and reinforces our desire
to be better business partners to our loyal dealers”
Steve Veltri, Sr. VP Sales at Custom Chrome
SHEETMETAL
S&S 96" Hot Set Up Kit for Evolution® Big Twins
The ultimate high-performance combination to bring out the beast
in your Evolution® Big Twin. This 96 cubic inch Hot Set Up kit is one of
S&S’s most reliable and includes:
• 35/8"-bore cylinders with forged pistons, rings, wrist pins,
retainers and gaskets
• 45/8" stroker flywheel and rod assembly complete with
sprocket and pinion shafts, assembled, trued and balanced.
• Heavy-duty valve springs, collars and ‘561’ camshaft
• Adjustable pushrods and hydraulic lifter limited
travel kit
• Super “E” carburetor with manifold, chrome air
cleaner and installation hardware
45959 Fits 1993 thru 1999 Big Twins with
80" engines . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,479.95
WWW.CUSTOMCHROME.COM
9.17
GAUGES
CHEMICALS
GENERAL
CROSS
REFERENCE
VULCAN ENGINEERING
Vulcan Engineering Billet Aluminum Cam Cover
Machined from 7075 Billet Aluminum. Direct OEM replacement or can
be used on any aftermarket generator style case. Includes bushings,
baffle plate & breather tube.
668140 1948-1969 Chrome Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $365.99
ENGINE
9
Vulcan Engineering Billet Aluminum Pan Cover Set
Machined from 6061 Billet Aluminum. Ideal for high lift cams that need
extra clearance. Reduces top end noise, eliminates valve cover oil leaks
and dissipates heat faster than steel stock covers.
668138 1948-1965 Gloss Black Powder Coat . . . . . . . . . . . . . . . . . . . . $541.99
668143 1948-1965 Chrome Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $541.99
Vulcan Engineering Billet Aluminum Cam Cover
Machined from 7075 Billet Aluminum Direct OEM replacement or can
be used on any aftermarket generator style case. Includes bushings,
baffle plate & breather tube.
668137 1948-1969 Gloss Black Powder Coat . . . . . . . . . . . . . . . . . . . . $365.99
668140 1948-1969 Chrome Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $365.99
Vulcan Engineering Twin Cam 88 Cam Cover Kit
for Gear Drive Cams.
Vulcan Engineering Rocker Box Set
Twin Cam 88. 6061 Billet Aluminum
668150 Chrome Plated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $714.99
9.18
This cam cover lets you use any EVO style, self contained ignition system. Requires no microprocessor, crank sensor, cam angle sensor, MAP
sensor, BAS sensor. 1999 thru 2006.
668149
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $898.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
VULCAN ENGINEERING
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
Vulcan Engineering
Twin Cam 88 Camshaft
Support Plate
Made from 7075 billet aluminum & hard coat
anodized. Will not flex or expand and contract as OEM plates do. All oil ports are drilled
and tapped for Grade-8 port plugs. Oil pump
relief valve and springs are included. 1999
thru 2006.
668148 Chain Drive . . . . . . . . . . . . . . . . . $261.99
LIGHTING
Vulcan Engineering Rocker Arm Support
Machined from 7075 Billet Aluminum.
Fits all Twin Cam motors. This Beefed up
Support will eliminate flexing when using
high lift cams and stiff valve springs. Hard
coat anodized.
668151 Rocker Arm Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99
668152 PCV Valve Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$48.99
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
Vulcan Engineering Rocker Arm
Shaft Teflon Seal Set
668136
1966-1969 Big Twin . . . . . . . . . . . $8.99
TRANNY
& CLUTCH
Vulcan Engineering Shovelhead
Rocker Box Flange Nut Set
Chrome plated steel with washers
668184
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $65.99
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
Vulcan Engineering
Pinion Shaft Nut
668131
1990-1992 Big Twin . . . . . . . . . . . $5.99
FORKS
& SHOCKS
SHEETMETAL
Vulcan Engineering
Adjustable Pushrod
668134
668135
Shovelhead (OEM
17904-66) . . . . . . . $52.89
Panhead . . . . . . . . $52.89
GAUGES
Vulcan Engineering Shovelhead
Rocker Box Stud Set
Made from 17-4PH stainless steel. Full 5/16’’ stud diameter
for superior strength. Set includes motor mount studs and
is for both heads.
28455
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $65.99
Vulcan Engineering
Pinion Gear Spacer
668132
CHEMICALS
GENERAL
1970-1999 Big Twin . . .$24.99
WWW.CUSTOMCHROME.COM
9.19
CROSS
REFERENCE
S . S ENGINE CASES . BREATHER VALVES
45751
020691
ENGINE
9
S&S Engine Cases
S&S complete engine cases come “set-up” with the cam and sprocket shaft Timken main bearing races installed and pinion shaft bearing race pressedin and line-honed, ready to fit. This offers a substantial labor savings and eliminates the need and expense of “line boring and honing”. Special
design features include:
• Cast from 356-T6 heat-treated aluminum alloy and CNC-machined
for consistency and superior quality.
• Additional material has been added in key areas for strength,
without requiring modifications for frame clearance.
• Clearances for any stroke up to and including 5" with stock
or beefy S&S rods.
• Ported breather passageway/cavity optimizes oil scavenging efficiency
while providing maximum timing specifications.
Crankcase assemblies include left and right cases, case bolts, nuts and
washers, cylinder mounting studs, timing hole and drain plugs, assorted
case fittings, sprocket shaft Timken bearing assembly, drive sprocket
spacer and oil seal, pinion shaft main bearing race, cam needle bearing,
oil pump drive shaft bushing and installation instructions. Shipped with
oil scraper machined for stock diameter flywheels.
S&S Crankcase
Breather Valves
for Twin Cam 88®
Models
By installing pressure sensors in
the crankcase, cam chest and
rocker covers S&S determined
the source and solution for the
problem of “oil carry-over”,
or in other words, oil out the
breather. The result is an ingenious valve that is installed
over the pinion shaft and inside the pinion bearing boss. It’s contained
between the pinion bearing outer retaining ring and the oil pump. Also
increases midrange horsepower and torque very slightly.
601115 Fits all Twin Cam 88® models (except Softail® models) from
1999 thru 2002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95
601116 Fits all Twin Cam 88® models (except Softail® models) from
2003 thru 2006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95
9.20
For Panhead Engines from 1958 thru 1964 (Generator-style)
020691 35/8"-bore – natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,439.95
For Shovelhead Engines from 1970 thru 1984
45754
Stock bore – natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,049.95
45755
35/8"-bore – natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,049.95
For Evolution® Big Twin Engines from 1984 thru 1991
45752
Stock bore – natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,039.95
45753
35/8"-bore – natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,039.95
For Evolution® Big Twin Engines from 1992 thru 1999
45750
Stock bore – natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,039.95
45751
35/8"-bore – natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,039.95
*1970-1991 models require CC #45811 or OEM 26190-73 oil pump. 1992-up models require
CC #45810 or OEM 26068-92 oil pump.
S&S Crankcase Breather Reed Valves
for 1993-'99 Engines
The S&S breather reed valve for 1993-'99 big
twins replaces the standard rotary breather
valve. Installation is fast and simple.
Remove the originalbreather gear and
insert the new S&S reed valve assembly into the breather valve cavity. No
aligning timing marks, and no rotating parts. The S&S crankcase breather reed valve can be used to replace
the stock style rotary breather valve
in engines with minor breather cavity
damage, and there is a +.030” oversized
reed valve for engines with heavily damaged breather bores.
Standard Diameter
614581 +.030” Oversize – (For damaged engines.) . . . . . . . . . . . . . . . $89.95
614582 +.030” Oversize – (For damaged engines.) . . . . . . . . . . . . . . . $99.95
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
DELKRON ENGINE CASES
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
17104
ELECTRICAL
EXHAUST
INTAKE
ENGINE
Delkron Engine Cases for Big Twins
GASKETS
Computer designed and CNC-machined cases are permanent mold cast of ‘356-T6’ aluminum with
1/2"-thick wall sections, have cast-in gray iron inserts and use standard fasteners. A removable
high-performance sump plate permits inspection of the bottom end, and is finned for additional
cooling. Permanent mold casting is superior to sand casting providing more exact duplication,
closer tolerances, better mold adhesion and precision race insert location. Other innovations
include:
• Extra rib on left front motor mount to prevent
ear breakage
• Oversized front and rear cylinder pad areas
• Alternator stator plug moved outboard to
eliminate thin area near left case race. Nylon set
screw holds plug in place
• Relocated primary O-ring groove provides positive seal and eliminates weak register lip
• Rerouted oil passages eliminate thin areas around cylinder and lifter blocks
• Roll-formed threads eliminate tap galling and ensure accurate thread size
• Work on forward or mid-shift models
• All cases complete with torque specs and instructions.
Engine Case Assemblies
The most important components are pre-installed at the factory and are ready to assemble. The
right-side pinion race is installed and line-honed to standard size. Includes left-side Timken bearings with races installed. Cases for Evolution® engines include cylinder studs.
Stock
35/8" Bore
17004 17005 Fits Evolution® engines from 1992 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,069.99
17002 17003 Fits Evolution® engines from 1984 thru 1991
(except Dyna Glide® engines) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,069.99
17000 17001 Alternator case for Big Twins from 1970 thru 1984 . . . . . . . . . . . . . . . . . . . . . . $1,039.99
Bare Engine Cases
Fully-machined cases including sump plate and gasket.
Application
Stock Bore
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
Delkron High-Performance
Sump Plate
FRAMES
Cast aluminum plate fits all Delkron engine
cases and is contoured to follow the shape of
the flywheels, and the outer surface has three
ribs for additional surface area to increase
cooling. A large-diameter sockethead drain
plug is installed for easier servicing. Includes
hardware and gasket.
17110 Sump plate . . . . . . . . . . . . . . . . . . . .$34.99
FORKS
& SHOCKS
SHEETMETAL
Note: Only fits cases manufactured after January, 1986.
17102 Replacement sump plate gasket (pack
of 10) . . . . . . . . . . . . . . . . . . . . . . . . .$11.99
GAUGES
35/8" Bore
Fits Evolution® engines from 1992 thru 1999 17116 .$899.99
Alternator case for 1970 thru 1984 Big Twins
n/a
n/a
17104 . . . . . . . . . . . . . . $899.99
CHEMICALS
GENERAL
WWW.CUSTOMCHROME.COM
9.21
CROSS
REFERENCE
STD ENGINE CASES . ENGINE STANDS
17123
17121
S.T.D. Engine Cases for Big Twins
ENGINE
9
Made from ‘356-T6’ aluminum alloy designed to handle flex-stress up to 38,000 PSI, and machined on CNC equipment to hold the tight tolerances
required. Cases are machined to accept Original Equipment or aftermarket cylinders and are notched for stroker flywheels. They are greatly improved
over previous models that had the left case race inserts cast in. S.T.D. now follows the factory’s example and sweats their inserts in with approximately
.006" of press.
17122
35/8"-big bore alternator case with studs for 1970 thru 1984 Shovelheads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,199.99
17123
Stock generator case for 1958 thru 1969 Panheads and Shovelheads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,099.99
17125
Stock case for 1984 thru 1991 Evolution® Big Twins (except Dyna Glide models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,099.99
17147
Stock case for 1992 thru 1999 Evolution® Big Twins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,099.99
Engine Stand for Sportster®
Models by JIMS®
Engine Stand for Big Twins
by JIMS®
Top-quality steel stand for Sportster® crankcases from 1957 thru 1985. Makes engine
overhauls a breeze.
20119
Engine stand . . . . . . . . . . . . . . . . . $85.99
Perfect for engine repair. This bench-mounted
stand works with Big Twin engine cases from
1936 thru 1999.
20105
Engine stand . . . . . . . . . . . . . . . . . $79.99
9.22
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Engine Stand for Big Twins
Great for repairing motors out of the bike or
for building custom motors. May be bolted to
a work bench for added stability.
20102
Fits Big Twin models from 1936 thru
1999 . . . . . . . . . . . . . . . . . . . . . . . . . $45.99
Please see cautionary information following page Ref.65
CRANKSHAFT ASSEMBLIES . COMPONENTS
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
S&S Crankshaft Assemblies
S&S 89" Stroker Kit
for Evolution® Big Twin Models
Designed with maximum potential engine life and performance in
mind. Each component is engineered with the strongest possible construction available.
Features include:
• 45/8"-stroke flywheels – machined from heat-treated steel forgings,
for strength
• Heavy duty connecting rods – reinforced chrome-moly steel
• S&S-design sprocket shaft – large diameter, keyed, 6° taper virtually
eliminates the possibility of spinning
• Pinion shaft – precision ground using the latest manufacturing
technology
Available for Evolution® Big Twin engines from 1984 thru 1989, each kit
includes a flywheel assembly with rods and shafts (balanced, trued, and
ready to install), with complete instructions.
45858 Fits Evolution® Big Twin engines from 1984 thru 1999
(piston and ring kit sold seperately) . . . . . . . . . . . . . . . . . . . . $1,049.99
614346 Forged piston and ring kit for CC #45858 . . . . . . . . . . . . . . . . . $289.95
Engineered with the strongest possible materials and construction
methods available. Each S&S crankshaft is factory assembled and
comes complete with heavy-duty rods, pinion shaft and sprocket shaft
fully assembled, ready to install. Flywheels only are also available for
stock replacement.
41/4"-Stroke Crankshaft (Stock)
45905 Flywheels with sprocket shaft only for 80" Big Twins from 1990
thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99
45864 Crankshaft assembly for 80" Big Twins from late 1984 thru 1989.
Will fit models from 1973 thru 1984 if +.001" oversized wrist pin
is used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$449.99
45/8"-Stroke Crankshaft
45866 Crankshaft assembly for Big Twins from late 1984 thru 1989. Will
fit models from 1973 thru 1984 if +001" oversized wrist pin is
used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $449.99
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
SHEETMETAL
Crankshaft Trueing Stand
Custom Chrome’s own trueing stand for all Harley® motors. Combines
outstanding value with full-function features, including 10" right-hand
swing, 6" left-hand swing and 18" center-to-center capacity. Full 80 lbs.
Pro grade unit is sold complete, and fitted with beam indicators,
accurate to .002".
24342 Flywheel trueing stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$629.99
24326 Replacement indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99
24327 Replacement live center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99
24328 Replacement dead center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99
24329 Replacement bearing bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.99
24344 Replacement handle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
GAUGES
CHEMICALS
GENERAL
Note: Does not ship free freight. Shipping weight 101 lbs.
WWW.CUSTOMCHROME.COM
9.23
CROSS
REFERENCE
CRANKSHAFT ASSEMBLIES . COMPONENTS
20326
S&S Heavy-Duty Connecting Rods
ENGINE
9
These connecting rods have been designed as heavy-duty replacements
for stock or modified engines. Each set comes complete with crank pin,
bearings, bearing retainers, nuts, and piston pin bushings.
Ready-to-install.
Design features include:
• Drop forged from 4140 chromemoly steel
• Harder-than-stock heat treatment specifications
• Additional rod-to-rod clearance to accommodate strokes up to 5"
• 7.440" center-to-center length
45720
Supreme duty for Big Twins with .791" wrist pin from late
1981 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $529.99
Motor Factory® Wrist Pin Bushings
Premium grade bushings are machined from high phosphor bearing
bronze that’s up to two times as stronger than cast bushings. They have
excellent hardness, strength and will help minimize wear and provide a
much longer service life than plated steel backed bushings. Americanmade. Sold in pairs
021011
Fits
Sportster® models
from 1957 thru 2003.
Replaces OEM 2433136 . . . . . . . . . . . . . . $15.99
021013
Fits
Big Twin models
from 1936 thru 1999.
Replaces OEM 2433436 . . . . . . . . . . . . . . $15.99
Connecting Rod Assemblies
Ready-to-install, complete with crank pin, crank pin nuts, piston pin
bushings and rod rollers with aluminum retainers.
For Big Twin Models
20326
Fits 1981-early 1983 (Evolution®-style) rod with
.791" wristpin bushing (repl. OEM 24281-80) . . . . . . . . . . . $219.99
Note: Rear rod to counterbalance clearance must be checked on Shovelhead flywheels.
20325
20324
1974-early 1981 models (repl. OEM 24281-74A) . . . . . . . . . $219.99
1941 thru 1973 models (repl. OEM 24281-41A). . . . . . . . . . $219.99
For Sportster® Models
20330
1986 thru 1999 models (repl. OEM 24275-86A). . . . . . . . . . $219.99
20329
1981 thru 1985 models (repl. OEM 24275-80A). . . . . . . . . . $219.99
20328
1957 thru 1980 models (repl. OEM 24275-57) . . . . . . . . . . . $219.99
RevTech® Forged Flywheels
Fully forged wheels and shafts for strength and durability. Designed
with early style pinion for Big Twin models from 1970 thru 1989.
Requires early style pinion gears. Sold in sets.
58006
41/4"-stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $549.99
58009
43/8"-stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $549.99
9.24
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
LOWER END PARTS
25927
25311
25927
26048
INDEX
APPAREL
SEATS
& BAGS
26048
FOOT
CONTROLS
20036
Timken Left Crankcase Bearings
For Big Twin Models
25927 1955 thru 1968 (repl. OEM 9029) $47.99
26048 1969 to present (repl. OEM 9028)$29.99
For Sportster® and K Models
26042 1954 thru 1976 (repl. OEM 24729-52)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $59.99
26134 1977 thru 1990 (repl. OEM 24729-74)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.99
20034
20066
20033
20031
Motor Case Bearing Races
American-made races available in standard
and .005" oversize. Listed in chronological
order. Sold each.
Right Case Races for Big Twins
20033 JIMS standard for OHV Big Twin models from 1940 thru 1954 (repl. OEM
24599-40) . . . . . . . . . . . . . . . . . . . . . .$64.99
20031 JIMS standard for Big Twin models
from 1958 thru 1992 (repl. OEM
24599-58A) . . . . . . . . . . . . . . . . . . . .$64.99
20648 JIMS .002" oversize for Big Twin models from 1958 thru 1992 (repl. OEM
24600-58A) . . . . . . . . . . . . . . . . . . . .$56.99
20647 JIMS standard (360° oiling) for
Evolution® Big Twins from 1993 to
present (repl. OEM 24599-58B) . .$69.99
Right Case Races for Sportster®
and K Models
20011 JIMS standard for Sportster® and K
models from 1954 thru 1976 (repl.
OEM 24585-57) . . . . . . . . . . . . . . . .$64.99
JIMS Left Case Races
20034 Standard left case race for Big Twin
models from 1940 thru 1954 (repl.
OEM 24621-40) . . . . . . . . . . . . . . . .$79.99
Sprocket Shaft Oil Seal
Fits Big Twin models from 1955 thru 1968.
A must for open primaries or custom (early
models) tin primary covers where oil leakage
is a problem.
15907 Sold each . . . . . . . . . . . . . . . . . . . . . . $19.99
Left Case Engine Parts for Big Twins
20058 Engine thrust washer set. 11 sizes per
set. Fits Big Twin models from 1929
thru 1954 . . . . . . . . . . . . . . . . . . . . . . $27.99
25311 Engine sprocket oil seal for Evolution®
Big Twins from 1970 thru 1999 (repl.
OEM 12026B) pack of 5 . . . . . . . . . $10.99
25927 Left crankcase Timken bearing for Big
Twins from 1955 thru 1968 (repl. OEM
9029) . . . . . . . . . . . . . . . . . . . . . . . . . . $47.99
26048 Left crankcase Timken bearing. Fits
Big Twin models from 1969 thru 1999
(repl. OEM 9028) . . . . . . . . . . . . . . . $29.99
20036 Sprocket shaft spacer for Evolution®
Big Twin models 1970 thru 1999 (repl.
OEM 24002-70). . . . . . . . . . . . . . . . . . $9.99
20646 JIMS sprocket shaft spacer kit with
8 spacers; .336", .516", .546", .574",
.606", .621", .636", and .666" thick.
Fits Big Twins 1955 thru 1969 with rubber sprocket shaft oil seal . . . . . . . $64.99
Lower End
Shims,
Washers
and Spacers
for Big Twin
and Sportster®
Models
Motor sprocket
bearing shims, right
crank bearing washers, crank pin boss thrust
washers and sprocket shaft spacers.
Motor Sprocket Bearing Shims
for Big Twins from 1969 thru 1992
56384 Bearing shim assortment (pack of 16)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
Motor Sprocket Bearing Shims
for Sportster® Models 1986 thru 2003
56394 Assortment (contains packs of 5) $19.99
Right Crank Bearing Washer
Fits Big Twins from 1958 thru 1986
56251 Replaces OEM 24692-58 (pack of 5)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.99
Crank Pin Boss Thrust Washers
56366 Fits Big Twins from late 1970 thru 1992
and Sportster® models from early
1979 thru 1986 (repl. OEM 6506) $12.99
56367 Fits Sportster® models from 1987 thru
1999 (repl. OEM 6508) . . . . . . . . . . $12.99
56267 Fits Sportster® models from 1957 thru
1971 (repl. OEM 23972-57) . . . . . . $12.99
Sprocket Shaft Spacers for Big Twins
56252 .060" (replaces OEM 24032-70) . . $14.99
56253 .090" (replaces OEM 24033-70) . . $14.99
56254 .120" (replaces OEM 24034-70) . . $14.99
56255 .150" (replaces OEM 24035-70) . . $14.99
56256 .180" (replaces OEM 24036-70) . . $14.99
56257 .210" (replaces OEM 24037-70) . . $14.99
17299 .250" . . . . . . . . . . . . . . . . . . . . . . . . . . $22.99
WWW.CUSTOMCHROME.COM
HAND
CONTROLS
LIGHTING
Engine Roller Bearings
American-made rollers. Sold in resealable bags
of 100.
Short Rod Rollers
Fits 1952 K-models and OHV Big Twins
1951 thru 1972 (36 used) . . . . . . . . . . . . . . . $17.99
Part #
Size
OEM #
49000
.1875 x .329 Std.
9101A
49001
+.0002
9102A
49002
+.0004
9103A
49005
+.001
9106A
Fits Sportster® and KH models 1954-early
1986 and Big Twins from 1973 thru
1986 (34 used) . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99
Part #
49025
49026
49027
49028
49029
49030
49031
49032
49033
Size
OEM #
.1875 x .294 Std.
+.0002
+.0004
+.0006
+.0008
+.001
+.002
+.003
–.0002
9441A
9442A
9443A
9444A
9445A
9446A
9418
n/a
9450A
Part #
Size
OEM #
.1875 x .585 Std.
+.0002
+.0004
+.0006
+.0008
+.001
+.002
9186
9180
9181
9182
9183
9184
n/a
49048
49049
49050
49051
49052
49053
49054
Size
OEM #
.250 x .490 Std.
+.0002
+.0004
+.0006
+.0008
+.001
+.002
9220A
9221A
9222A
9223A
9224A
9225A
n/a
49042
49043
49044
49045
49046
49047
Size
OEM #
.1875 x .800 Std.
+.0002
+.0004
+.0006
+.0008
+.001
9421
9422
9423
9424
9425
9426
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
SHEETMETAL
Right Side Crankcase Rollers
for Sportster® and Big Twin Models
Fits 1957 thru 1976 Sportster® models
and 1955 thru 1957 OHV Big Twins
(13 used) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.99
Part #
INTAKE
GASKETS
Crankcase Rollers for Big Twins
Fits the left case of OHV Big Twins 1930
thru 1957 (24 used), and the right case
1958 thru 1986 (28 used). Also fit all
early wheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99
Part #
EXHAUST
ENGINE
Long Rod Rollers
Fits Big Twins from 1973 thru
1986 (17 used) . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99
49016
49017
49018
49019
49020
49021
49022
ELECTRICAL
GAUGES
CHEMICALS
GENERAL
9.25
CROSS
REFERENCE
LOWER END PARTS
E
E
A
F
G
C
D
B
A. Upper Rod Bushings
25273 .002" oversize. Fits Evolution® Big Twins
from 1936 thru 1999 (repl. OEM 2433436) sold each . . . . . . . . . . . . . . . . . . . . . $6.59
25608 Standard. Fits Sportster® and K models
from 1952 thru 2003 (repl. OEM 2433136) sold each . . . . . . . . . . . . . . . . . . . . $12.99
ENGINE
9
B. Connecting Rod Races
Complete set of three male and female races.
15928 Fits Evolution® Big Twin models from
1936 thru 1999 (repl. OEMs 24345-36A,
24356-36A) . . . . . . . . . . . . . . . . . . . . . . . 0.00
15929 Fits Sportster® and K models from 1952
thru 1999 (repl. OEMs 24352-52A,
24341-52A) . . . . . . . . . . . . . . . . . . . . . $26.99
20636 JIMS® races. Fits Evolution® Big Twins
from 1936 thru 1999 (repl. OEMs
24345-36A, 24356-36A) . . . . . . . . . . $54.99
C. Rod Rollers and Retainer Kit
18678 Standard. Fits Evolution® Big Twin models 1987 thru 1999 (repl. OEM 2434687A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79.99
18671 Standard. Fits Big Twin models from
1940 thru 1986 (repl. OEM 24385-40B)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.99
18674 Standard. Fits Sportster® and K models
1952-early 1986 (repl. OEM 24370-52B)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.99
D. JIMS® Crank Pins
20041 Fits 1941-early 1981 Big Twin models
(repl. OEM 23961-41) 3-hole crankpin
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $72.99
20422 Fits Evolution® Big Twins late 1983 thru
1999 (repl. OEM 23961-80A) . . . . . $79.99
22332 Oversize +.001" for Big Twins from late
1981 thru 1999 (3-hole crankpin) . $79.99
22333 Oversize +.002" for Big Twins from late
1981 thru 1999 (3-hole crankpin) . $79.99
20042 Fits Sportster® and K models from 1954early 1981 (repl. OEM 23960-54) 3-hole
crankpin . . . . . . . . . . . . . . . . . . . . . . . . $69.99
20420 Fits Sportster® models from late 1981
thru 2003 (repl. OEM 23960-80A) $75.99
D. Custom Chrome® Crank Pins
Pins are Rockwell tested 65 on a C-scale.
18670 Fits Big Twin models 1941-early 1981
(repl. OEM 23961-41) . . . . . . . . . . . . $43.99
18676 Fits Big Twin models late 1981-early
1983 (repl. OEM 23961-80) . . . . . . . $41.99
18673 Fits Sportster® models 1954-early 1981
(repl. OEM 23960-54) . . . . . . . . . . . . $51.99
Custom Chrome® Crank Pin Keys
20090 Fits Sportster® and Big Twin models
from 1936-early 1981 (repl. OEM
23985-18) pack of 10 . . . . . . . . . . . . . $5.59
56307 Fits Sportster® and Evolution® Big Twin
models from late 1981 thru 2003 (repl.
OEM 11218) pack of 10 . . . . . . . . . . . $5.19
9.26
JIMS® Crank Pin Keys
20924 Fits Sportster® and Big Twin models
from 1936-early 1981 (repl. OEM
23985-18) pack of 10 . . . . . . . . . . . . . $9.99
20926 Fits Big Twins from late 1981 thru 1999
(except Twin Cam 88® models) and
Sportster® models from late 1981 thru
2003 (repl. OEM 11218) pack of 10 $7.99
E. Crank Pin Nut Kits
Each kit includes two nuts, two locks and
two screws.
20076 Fits all Big Twin models 1936 thru 1984
(except Evolution® models). Complete
kit (repl. OEM 23966-78) . . . . . . . . . $18.99
F. JIMS® Sprocket Shafts
20025 Fits 1930 thru 1954 Big Twin models
(repl. OEM 24001-30) . . . . . . . . . . . . $55.99
20072 Fits 1956 thru 1964 Big Twin models
(repl. OEM 24001-56) . . . . . . . . . . . . $79.99
20074 Fits 1970 thru 1971 Big Twin models
(repl. OEM 24001-70) . . . . . . . . . . . . $84.99
20075 Fits 1972-early 1981 Big Twin models
repl. OEM 24001-72) . . . . . . . . . . . . . $84.99
20781 Fits late 1981-early 1985 Big Twin models. Complete kit includes the shaft,
two nuts, and a key . . . . . . . . . . . . $109.99
20059 Fits 1957 thru 1976 Sportster® models
(repl. OEM 24000-57) . . . . . . . . . . . . $79.99
Sprocket Shaft Keys for Big Twins
20092 Fits 1956 thru 1971 models (repl. OEM
23985-56) pack of 10 . . . . . . . . . . . . . $6.89
G. JIMS® Pinion Shafts
20028 Fits 1939 thru 1953 Big Twin models
(repl. OEM 24007-39) . . . . . . . . . . . . $95.99
20060 Fits 1958 thru 1972 Big Twin models
(repl. OEM 24006-58) . . . . . . . . . . . . $79.99
20061 Fits 1973-early 1981 Big Twin models
(repl. OEM 24006-73) . . . . . . . . . . . . $79.99
20644 Fits late 1981 thru 1986 Big Twin models. Metering oil screw included (repl.
OEM 24006-73). . . . . . . . . . . . . . . . . . $79.99
Note: Late 1981-early 1983 motors require 3/4"-20 nuts
(CC #20271 or OEM 24016-80) when using CC #20644
or CC #20784.
20008 Fits 1957 thru 1976 Sportster® models
(repl. OEM 24005-57) . . . . . . . . . . . . $84.99
20022
20023
20045
20080
20079
Idler and Circuit Breaker Drive
Gear Shafts, Bushings and Spacers
20023 JIMS® idler shaft. Fits OHV Big Twins
1936 thru 1969 (repl. OEM 25791-36)
sold each . . . . . . . . . . . . . . . . . . . . . . $17.99
20022 JIMS® circuit breaker shaft. Fits OHV
Big Twins from 1936 thru 1969 (repl.
OEM 25856-36) sold each . . . . . . . $12.99
20045 Bushings. Fits OHV Big Twins from
1936 thru 1969 (repl. OEM 25785-30A)
sold in pairs . . . . . . . . . . . . . . . . . . . . $12.99
20093 Spacers. Fits OHV Big Twins from 1936
thru 1969 (repl. OEM 25800-36) sold in
pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99
20079 Idler shaft kit. Contains idler shaft and
one bushing. Fits OHV Big Twin models from 1941 thru 1969 (repl. OEM
25791-36) . . . . . . . . . . . . . . . . . . . . . . $11.99
20657 JIMS® Idler shaft and bushing kit.
Contains idler shaft and one bushing.
Fits OHV Big Twins 1936 thru 1969
(repl. OEMs 25791-36, 25785-30A)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99
20080 Circuit breaker drive gear stud kit.
Contains one shaft and two bushings
(repl. OEMs 25856-77, 25785-30A)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99
20658 JIMS® circuit breaker shaft and bushing kit. Contains one shaft and two
bushings for Big Twin models 1936
thru 1969 (repl. OEMs 25856-36,
25785-30A) . . . . . . . . . . . . . . . . . . . . $29.99
Custom Chrome® Pinion Shaft Keys
for Big Twins
20089 1936-early 1981 (repl. OEM 23985-12)
pack of 10 . . . . . . . . . . . . . . . . . . . . . . $11.99
56307 Late 1981 thru 1990 (repl. OEM 11218)
pack of 10 . . . . . . . . . . . . . . . . . . . . . . . $5.19
JIMS® Pinion Shaft Keys for Big Twins
20926 Late 1981 thru 1990 (repl. OEM 11218)
pack of 10 . . . . . . . . . . . . . . . . . . . . . . . $7.99
JIMS® Left-Hand Screws for
Pinion Gear Shafts
20007 Replaces OEM 24020-51
(pack of 10) . . . . . . . . . . . . . . . . . . . . . $19.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Bearing Retainer Cage
Right crankcase bearing retainer and cage for
all Big Twin motors 1958 to 1986. Does not
include sized needle bearings.
Sold in pairs.
18669
Replaces OEM 43578-35 . . . . . . $18.99
Please see cautionary information following page Ref.65
LOWER END PARTS
Accel® Super Shaft™ Crank Pins, Pinion Shafts
and Sprocket Shafts
APPAREL
All shafts have a “no questions asked” lifetime replacement warranty to
the consumer. If any Accel-branded shaft or pin fails at any time for any
reason, they will replace it free to the consumer directly from their factory.
Other features include:
• 3-hole crank pin design distributes oil equally to both rod races
• Annealed threads on shafts permit torquing up to 100 ft. pounds
over the Original Equipment specifications
• Machined from super-tough, aircraft-rated Durabar 60™ steel
and bearing surfaces are precision-ground to a 16 micron finish
• Deep heat-treating provides rugged 60-63 Rockwell hardness
• CNC machined tapers guarantee concentricity within .0003"
20777
JIMS® Crank Pins
These crank pins feature a 16 micron finish or better on the flywheel shafts and all
diameters ground are concentric to at least
.0003". The crank pin kits include a precision
American-made 2- or 3-hole crank pin, two
crank pin nuts and a woodruff key.
2-Hole Crank Pin Kits
20778 Fits Big Twins from 1941-early 1981
(has late 1"-20 threads) repl. OEM
23961-41 . . . . . . . . . . . . . . . . . . . . . . $109.99
20779 Fits Big Twins from late 1981 thru 1999
(repl. OEM 23961-80A) . . . . . . . . $109.99
Note: Only shafts branded with the Accel name are covered. Parts must be returned by consumer
directly to Accel for inspection. Replacement warranty does not cover any related engine failures,
labor claims, down time, or consequential damage and is limited to a free direct replacement of
the part by the factory to the consumer.
3-Hole Crank Pins ONLY
20041 Fits Big Twins from 1941-early 1981
(repl. OEM 23961-41) . . . . . . . . . . . $72.99
20422 Fits Evolution® Big Twins from late
1983 thru 1999
(repl. OEM 23961-80A) . . . . . . . . . $79.99
22332 Oversize +.001" for Big Twins from
late 1981 thru 1999. . . . . . . . . . . . . $79.99
22333 Oversize +.002" for Big Twins from
late 1981 thru 1999. . . . . . . . . . . . . $79.99
20042 Fits Sportster® and K models from
1954-early 1981
(repl. OEM 23960-54) . . . . . . . . . . . $69.99
20420 Fits Sportster® models from late 1981
thru 2003 (repl. OEM 23960-80A) $75.99
Crank Pin Keys (packs of 10)
20924 Fits Big Twins from 1941-early 1981.
Use with crank pins OEM 23960-29,
OEM 23960-54, and OEM 23962-40
(repl. OEM 23985-18) . . . . . . . . . . . . $9.99
20926 Fits Big Twins from late 1981 thru 1999
and Sportster® models from late 1981
thru 2003. Use with Big Twin crank
pin OEM 23960-80 (also fits Big Twin
pinion shaft from late 1981 thru 1989)
Replaces OEM 11218 . . . . . . . . . . . . $7.99
FOOT
CONTROLS
HAND
CONTROLS
CRANK PINS
PINION SHAFTS
ELECTRICAL
EXHAUST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
INTAKE
SPROCKET SHAFTS
ILLUS. #
PART #
REPL. OEM #
1
20230
24001-72
Fits Big Twin models from 1972-early 1981
APPLICATION
n/a
n/a
24000-80
Fits Sportster® models from late 1981 thru 1985
3
n/a
24000-57
Fits Sportster® models from 1957 thru 1976
4
n/a
23909-80
Fits Big Twin models from late 1981-early 1985
ILLUS. #
PART #
REPL. OEM #
5
20266
24006-83
6
20264
24006-73
Fits Big Twin models from 1973-early 1981
7
20263
24006-58
Fits Big Twins from 1958 thru 1972 (oil plug galley included)
ENGINE
GASKETS
PINION SHAFTS
TRANNY
& CLUTCH
APPLICATION
Fits Big Twin models from late 1981 thru 1986
(metered oil fitting included)
8
n/a
24005-80
Fits Sportster® models from late 1981 thru 1985
9
n/a
24005-75
Fits Sportster® models from 1977-early 1981
10
n/a
24005-57
Fits Sportster® models from 1957 thru 1976
ILLUS. #
PART #
REPL. OEM #
11
20187
23961-80A
12
20186
23961-41
13
n/a
23960-80A
14
n/a
23960-54
DRIVELINE
WHEELS,
TIRES
& BRAKES
CRANK PINS
FRAMES
APPLICATION
Fits Evolution® Big Twin models from late 1981 thru 1999
Fits Big Twin models from 1941-early 1981
FORKS
& SHOCKS
Fits Sportster® models from late 1981 thru 1999
Fits Sportster® and K-models from 1954-early 1981
SHEETMETAL
JIMS® Pinion Shaft Kits
20782
SEATS
& BAGS
LIGHTING
SPROCKET SHAFTS
Note: Pre-1956 motors should be checked for nut-to-crankcase clearance when installing CC #20778.
3-Hole Crank Pin Kits
20777 Fits Big Twins from 1941-early 1981
(repl. OEM 23961-41) . . . . . . . . . . $109.99
20780 Fits Big Twins from late 1981 thru 1999
(repl. OEM 23961-80A) . . . . . . . . $109.99
INDEX
American-made replacements for the Original
Equipment pieces. Each kit includes the shaft,
nuts, keys, washers, and retaining rings.
20782 Fits Big Twin models from 1973-early
1981 (repl. OEM 24006-73) . . . . . . $119.99
20783 Fits Big Twin models from late 1981early 1986 (repl. OEMs 24006-80,
24006-83). Also for aftermarket flywheels with common-taper design
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $119.99
22335 Fits Big Twin models from 1987 thru
1989 (end oiling) . . . . . . . . . . . . . . . . $84.99
Pinion Shaft Keys (packs of 10)
20925 Fits Big Twin models from 1954 thru
1989 (repl. OEM 23985-54) . . . . . . . . $9.99
20926 Fits Big Twins from late 1981 thru 1989
(repl. OEM 11218) . . . . . . . . . . . . . . . . $7.99
Pinion Gear Spacer (pack of 5)
20932 Fits Big Twins from 1954 thru 1989
(repl. OEM 24703-54B) . . . . . . . . . . . $24.99
Oil Pump Gear (sold each)
20934 Fits Big Twins from 1984 thru 1990
(repl. OEM 26349-84) . . . . . . . . . . . . $54.99
GAUGES
CHEMICALS
GENERAL
Note: For 1990 thru 1992 models choose either 1981 thru 1989
or 1993 thru1999 shaft, and match oil pump gear, pinion gear,
spacer and nut designs to the shaft.
WWW.CUSTOMCHROME.COM
9.27
CROSS
REFERENCE
KB PISTON KITS
KB CAST PISTONS FOR BIG TWINS
High quality perfomance pistons manufactured from high-strength T6 aluminum alloy.This design allows tighter fitment in a longer piston and ring
life.Includes 2 cast pistons,1 set of rings,and piston clips.
For Twin Cam 88® Models from 1998 to Present
For Knucle.Pan,Shovelhead models 1941 thru 1979
3.8750"
650904
650905
650906
650907
3.4980"
650908
650909
650910
Bore with 4.0000" Stroke/95" and 9.25:1 Compression
Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $218.56
+.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $218.56
+.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $218.56
+.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $218.56
Bore with 3.9690" Stroke/74" and 8.5:1 Compression
+.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $177.41
+.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $177.41
+.030" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $177.41
For Shovelhead models from 1948 to 1984
3.8750"Bore with 4.0000"Stroke/95" and 10.5:1 Compression
650929 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $227.64
650930 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $227.64
650931 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $227.64
650932 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $227.64
3.7500"Bore with 4.0000"Stroke/88" and 9.25:1 Compression
650937 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $212.78
650938 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $212.78
650939 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $212.78
650940 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $212.78
For Evolution® Big Twins from 1984 thru 1999
ENGINE
9
3.4980""
650911
650912
650913
650914
Bore with 41/4" Stroke/80" and 9.5:1 Compression
Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
3.4980"
650900
650901
650902
650903
Bore with 41/4" Stroke/80" and 10.5:1 Compression
Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
3.6250"
650922
650923
650924
Bore with 4.250" to 4.750" Stroke/88-98' and 9.0:1
+.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $218.56
+.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $218.56
+.030" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $218.56
For Shovelhead Models from 1980 thru 1984
3.4980"
650915
650916
650917
650918
Bore with 41/4" Stroke/80" and 8.0:1 Compression
Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
3.4980"
650919
650920
650921
Bore with 41/4" Stroke/80" and 9.5:1 Compression
+.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
For 1200cc Evolution® Sportster® Models from 1988 thru 2003
3.4980"
650933
650934
650935
650936
Bore with 3.8120" Stroke/74" and 9:1 Compression
Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $167.97
+.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $167.97
+.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $167.97
+.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $167.97
883cc to 1200cc Conversion Kits for Evolution®
Sportster® Models from 1986 thru 2003
3.4980"
650925
650926
650927
650928
9.28
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Bore with 3.8120" Stroke/74" and 9:1 Compression
Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
+.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $182.11
Please see cautionary information following page Ref.65
KB PISTON KITS
KB PERFORMANCE FORGED PISTONS
INDEX
APPAREL
Made from the highest quality extruded bar in alloys of 2618 and 4032. New light weight.Designed on state of the art solid modeling computer
programs. Features top land mini groove designed. Comes complete with pistons,pin,lock-rings and spacer.
SEATS
& BAGS
For Twin Cam 88® Models From 1999 to 2006
3.875" Bore with 4.000 Stroke/ 88" to 95" Dome .0087+1.5cc /
9.25 Compression
650960 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650961 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650962 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650963 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
4.000 Bore with 4.375" Stroke/96" to 110"
Dish .005+2.1cc / 10.5:1 Compression
650988 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650989 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650990 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650991 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.875" Bore with 4.000 Stroke/ 88" to 95" Dome .0087+1.5cc /
9.25 Compression
650964 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650965 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650966 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650967 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
For Evolution® Big Twins from 1984 thru 1999
FOOT
CONTROLS
$237.14
$237.14
$237.14
$237.14
HAND
CONTROLS
LIGHTING
For Twin Cam 96® Models from 2007 to Present
3.498" Bore with 4.250" Stroke/ 80"
Dome .095-8.1cc / 9.5:1 Compression
650941 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650942 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650943 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650948 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.875" Bore with 4.375" Stroke/ 96" to 103" Flat Top + 1.7cc /
10.0:1 Compression
650968 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650969 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650970 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650971 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
3.498" Bore with 4.250" Stroke/ 80" Dome .220-16.4cc / 10.5:1
Compression
650945 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $219.80
650946 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $219.80
650947 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $219.80
650948 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $219.80
3.875" Bore with 4.375" Stroke/ 96" to 103"Dome .058-3.2cc /
10.5:1 Compression
650972 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650973 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650974 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650975 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
For Shovelhead Models from 1978 thru 1984
$219.80
ELECTRICAL
$219.80
$219.80
$219.80
EXHAUST
INTAKE
ENGINE
For Twin Cam 88® Models From 1999 to 2006
4.125" Bore with 4.000" Stroke/88" to 107" Dish .021+4.1cc /
10.0:1 Compression
650976 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650977 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650978 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650979 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
4.125" Bore with 4.000" Stroke/88" to 107" Dome .007-1.0cc /
10.5:1 Compression
650980 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650981 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650982 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
650983 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $237.14
For Twin Cam 96® Models from 2007 to Present
4.000 Bore with 4.375" Stroke/96'' to 110" Dish .058+7.7cc
10.0:1 Compression
650984 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650985 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650986 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650987 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.498" Bore with 4.250" Stroke/ 80" Dome Hemi -47.4cc / 8.5:1
Compression
650949 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $193.40
650950 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $193.40
650951 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $193.40
3.498" Bore with 4.250" Stroke/ 80"
Dome Hemi -58cc / 9.5:1 Compression
650952 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650953 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650954 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
650955 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$193.40
GASKETS
TRANNY
& CLUTCH
DRIVELINE
$193.40
$193.40
$193.40
883cc to 1200cc Conversion Kits for Evolution®
Sportster® Models from 1986 thru 2003
WHEELS,
TIRES
& BRAKES
FRAMES
3.498" Bore with 3.812" Stroke Dish .113+13.7cc / 9.5:1
Compression
650956 Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $219.80
650957 +.005" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $219.80
650958 +.010" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $219.80
650959 +.020" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $219.80
/
FORKS
& SHOCKS
SHEETMETAL
$237.14
$237.14
GAUGES
$237.14
$237.14
CHEMICALS
GENERAL
WWW.CUSTOMCHROME.COM
9.29
CROSS
REFERENCE
LOWER END PARTS
1954-Early 1977
Late 1977-1989
JIMS® Pinion Gears for Big Twins
S&S Pinion Shaft Conversion Kits
for Big Twins
Retrofit 1990 thru 1999 Evolution® Big Twins
to 1977 thru 1989-style pinion shaft. For
use with aftermarket, separate pinion used
in high performance engine building. Kit
includes a 1977 thru 1989-style pinion gear,
1954 thru 1989-style pinion shaft oil pump
drive gear, pinion shaft gear spacer and pinion
shaft gear nut.
45715 Fits stock (red) 1977 thru 1989 Big
Twins and all S&S shafts 1958 to
present . . . . . . . . . . . . . . . . . . . . . . . $119.99
ENGINE
9
Pinion Shaft
Bearings
94054
94055
94056
94057
Replacement bearings
for Evolution® Big Twin
models from 1987 thru
1999. The highest quality at an affordable
price. Sold each.
Green (repl. OEM 24628-87A) . . . $19.99
Orange (repl. OEM 24641-87A). . $19.99
Blue (repl. OEM 24643-87A). . . . . $19.99
White/Grey (repl. OEM 24626-87A)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99
A wide selection of pinion gears for all Big
Twin models 1954 thru 1989. Sold each.
1954-Early 1977 Models
All measurements are taken over .105"
gauge pins.
20786 Orange (measures 1.4490-1.4485)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $109.99
20787
20788
20789
20790
20791
20792
Black (measures 1.4485-1.4480) $109.99
Red (measures 1.4480-1.4475) . . $109.99
Blue (measures 1.4475-1.4470) . $109.99
Green (measures 1.4470-1.4465) $109.99
White (measures 1.4465-1.4460) $109.99
Brown (measures 1.4460-1.4455)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $109.99
20793 Yellow (measures 1.4455-1.4450)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $109.99
Late 1977 thru 1989 Models
All measurements are taken over .105"
gauge pins.
20794 Orange (measures 1.4756-1.4751) repl.
OEM 24040-78 . . . . . . . . . . . . . . . . . $99.99
20795 White (measures 1.4751-1.4745) repl.
OEM 24041-78 . . . . . . . . . . . . . . . . . $99.99
20796 Yellow (measures 1.4745-1.4737) repl.
OEM 24042-78 . . . . . . . . . . . . . . . . . $99.99
20797 Red (measures 1.4737-1.4729) repl.
OEM 24043-78 . . . . . . . . . . . . . . . . . $99.99
20798 Blue (measures 1.4729-1.4721) repl.
OEM 24044-78 . . . . . . . . . . . . . . . . . $99.99
20799 Green (measures 1.4721-1.4715) repl.
OEM 24045-78 . . . . . . . . . . . . . . . . . $99.99
20800 Black (measures 1.4715-1.4710) repl.
OEM 24046-78 . . . . . . . . . . . . . . . . . $99.99
Pinion Gear Key
20091 1954 thru 1990 (repl. OEM 23985-54)
pack of 10 . . . . . . . . . . . . . . . . . . . . . . $5.59
20271
1993 thru 1999
Late 1977-1989
RevTech® Pinion Gears
for Big Twins
A wide selection of pinion gears featuring
precision-ground teeth for most Big Twins
from late 1977 thru 1999. Sold each.
For Evolution® Big Twin Models
from 1993 thru 1999
All measurements are taken over .105"-diameter gauge pins. Sold each.
94025 Orange (measures 1.4853-1.4850) repl.
OEM 24040-93 . . . . . . . . . . . . . . . . . $37.99
94026 White (measures 1.4849-1.4846) repl.
OEM 24041-93 . . . . . . . . . . . . . . . . . $37.99
94027 Yellow (measures 1.4845-1.4842) repl.
OEM 24042-93 . . . . . . . . . . . . . . . . . $37.99
94028 Red (measures 1.4841-1.4838) repl.
OEM 24043-93 . . . . . . . . . . . . . . . . . $37.99
94029 Blue (measures 1.4837-1.4834) repl.
OEM 24044-93 . . . . . . . . . . . . . . . . . $37.99
94030 Green (measures 1.4833-1.4830) repl.
OEM 24045-93 . . . . . . . . . . . . . . . . . $37.99
94031 Black (measures 1.4829-1.4826) repl.
OEM 24046-93 . . . . . . . . . . . . . . . . . $37.99
For Big Twins from Late 1977 thru 1989
All measurements are taken over .105"diameter gauge pins. Sold each.
94045 Orange (measures 1.4756-1.4751) repl.
OEM 24040-78 . . . . . . . . . . . . . . . . . $39.99
94046 White (measures 1.4751-1.4745) repl.
OEM 24041-78 . . . . . . . . . . . . . . . . . $39.99
94047 Yellow (measures 1.4745-1.4737) repl.
OEM 24042-78 . . . . . . . . . . . . . . . . . $39.99
94048 Red (measures 1.4737-1.4729) repl.
OEM 24043-78 . . . . . . . . . . . . . . . . . $39.99
94049 Blue (measures 1.4729-1.4721) repl.
OEM 24044-78 . . . . . . . . . . . . . . . . . $39.99
94050 Green (measures 1.4721-1.4715) repl.
OEM 24045-78 . . . . . . . . . . . . . . . . . $39.99
94051 Black (measures 1.4715-1.4710) repl.
OEM 24046-78 . . . . . . . . . . . . . . . . . $39.99
Pinion Gear Key
Fits models from 1954 thru 1990
20091 Replaces OEM 23985-54 (pack of 10)
20273
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.59
20284
Crankshaft Nuts
American-made replacements for the Original
Equipment pieces. Face-ground to a 32 surface
finish that is square to the threads within
.0005". Sold each.
Pinion Gear Shaft Nuts
Fits Big Twins from late 1981 thru 1989
(3/4"-20 threads).
20271 Replaces OEM 24016-80 . . . . . . . . . $17.99
Fits Big Twin models from 1954 thru 1989
(5/8"-24 left hand threads).
20645 Replaces OEM 24023-54 . . . . . . . . . . $9.99
9.30
20272
Crank Pin Nut
Fits Evolution® Big Twin models from late 1983
to present (1"-20 threads).
20284 Replaces OEM 23969-83 (set of 2) $35.99
Sprocket Shaft Nut
Fits Big Twins from 1972-early 1985 (11/8"-16
threads).
20272 Replaces OEM 24017-80 . . . . . . . . . $21.99
Pinion and Sprocket Shaft Nut
Fits Big Twins from 1930-early 1981
(3/4"-18 threads).
20273 Replaces OEM 24023-36 . . . . . . . . . $19.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Replacement
Engine Nuts
Fit many Big Twin
and Sportster® models
from 1930 thru 1990.
12113
Sold each.
12113 Fits Sportster® models from 1970 thru
1985 (repl. OEM 40387-70) . . . . . . $11.99
20055 Fits Big Twins from 1955 thru 1990
(without compensating sprocket) repl.
OEM 24003-55 . . . . . . . . . . . . . . . . . . $7.19
Please see cautionary information following page Ref.65
WISECO PISTON KITS
Wiseco® Forged Piston Kits
These high-performance piston kits have been
re-designed with stock ring lands, and are
forged from high-silicone aluminum alloy that
provides excellent wear and heat dissipation
characteristics. The unique shape permits tight
piston-to-wall clearances for quieter operation.
When combined with the ring package and
CNC-machined anti-detonation grooves, it
becomes one of the most technically-advanced
pistons available.
Sold in sets, complete with two
pistons, rings, wrist pins and
circlips. Some kits also include
special head and base gaskets
or complete top-end kits where
indicated.
INDEX
APPAREL
SEATS
& BAGS
47411
FOOT
CONTROLS
For Evolution® Big Twin Models
with Screamin’ Eagle® Heads
31/2" Bore with 41/4" Stroke and 10.5:1 Compression
Fit all models with Screamin’ Eagle® heads
from 1984 thru 2000. Use stock replacement
piston rings (see page 9.27).
47411 +.005" oversize. . . . . . . . . . . . . . . . $249.99
47412 +.010" oversize. . . . . . . . . . . . . . . . $249.99
47413 +.020" oversize. . . . . . . . . . . . . . . . $249.99
HAND
CONTROLS
LIGHTING
ELECTRICAL
47092
EXHAUST
INTAKE
47418
47082
37/8" Bore with 4" Stroke and 9:1 Compression
Includes a top-end gasket kit.
47418 Standard . . . . . . . . . . . . . . . . . . . . . . $249.99
47419 +.005" oversize. . . . . . . . . . . . . . . . $359.99
47420 +.010" oversize. . . . . . . . . . . . . . . . $359.99
37/8" Bore with 4" Stroke and 10.5:1 Compression
Includes a top-end gasket kit. Screamin' Eagle®
ignition system is also required for optimum
performance.
47422 Standard . . . . . . . . . . . . . . . . . . . . . . $249.99
47423 +.005" oversize. . . . . . . . . . . . . . . . $359.99
47424 +.010" oversize. . . . . . . . . . . . . . . . $359.99
47425 +.020" oversize. . . . . . . . . . . . . . . . $359.99
Replacement Moly Ring Sets
Sold in sets for two pistons.
58900 Standard . . . . . . . . . . . . . . . . . . . . . . . $45.99
58901 +.005" oversize. . . . . . . . . . . . . . . . . $45.99
58902 +.010" oversize. . . . . . . . . . . . . . . . . $45.99
58903 +.020" oversize. . . . . . . . . . . . . . . . . $45.99
58904 +.030" oversize. . . . . . . . . . . . . . . . . $45.99
ENGINE
GASKETS
TRANNY
& CLUTCH
35/8" Bore with 41/4" Stroke and 10:1 Compression
47422
For Twin Cam 88® Models with 95" Big
Bore Conversion from 1999 to Present
These kits will increase engine size to 1550cc
and only require cylinder boring
for installation.
35/8"-Bore Piston Kits for Evolution®
Big Twin Models from 1984 thru 2000
Designed for stock 1340cc Big Twin cylinder
heads. Crankcases must be bored to accept
larger cylinders. Due to strength concerns,
these kits are only recommended for use with
aftermarket crankcases or Original Equipment
crankcases from 1984 thru 1989 and from
1996 thru 2000.
For Evolution® Big Twin Models from
1984 thru 2000
31/2" Bore with 41/4" Stroke and 8.5:1 Compression
For use with stock heads. May also be used
with Screamin’ Eagle® heads but compression
ratio will be increased to 9.5:1. Use stock
replacement piston rings (see page 9.27).
47092 Standard . . . . . . . . . . . . . . . . . . . . . . $229.99
47093 +.010" oversize. . . . . . . . . . . . . . . . $239.99
47094 +.020" oversize. . . . . . . . . . . . . . . . $239.99
47095 +.030" oversize. . . . . . . . . . . . . . . . $239.99
47096 +.040" oversize. . . . . . . . . . . . . . . . $239.99
31/2" Bore with 41/4" Stroke and 10:1 Compression
For use with stock heads.
47082 Standard . . . . . . . . . . . . . . . . . . . . . . $249.99
47083 .005" oversize . . . . . . . . . . . . . . . . . $244.99
47084 .010" oversize . . . . . . . . . . . . . . . . . $244.99
47085 .020" oversize . . . . . . . . . . . . . . . . . $244.99
47086 .030" oversize . . . . . . . . . . . . . . . . . $244.99
47097 .040" oversize . . . . . . . . . . . . . . . . . $244.99
Increases engine size to 88 cubic inches
and includes head and base gaskets.
47068 +.020" oversize. . . . . . . . . . . . . . . . $249.99
DRIVELINE
35/8" Bore with 45/8" Stroke and 10.5:1 Compression
Increases engine size to 96 cubic inches
and includes head and base gaskets.
47415 +.010" oversize. . . . . . . . . . . . . . . . $259.99
Replacement Moly Ring Sets
Sold in sets for one piston.
58240 Standard . . . . . . . . . . . . . . . . . . . . . . . $20.99
58241 +.005" oversize. . . . . . . . . . . . . . . . . $20.99
58242 +.010" oversize. . . . . . . . . . . . . . . . . $20.99
58243 +.020" oversize. . . . . . . . . . . . . . . . . $20.99
58244 +.030" oversize. . . . . . . . . . . . . . . . . $20.99
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
SHEETMETAL
GAUGES
31/2" Bore with 41/4" Stroke and 11:1 Compression
For use with stock heads.
47259 Standard . . . . . . . . . . . . . . . . . . . . . . $249.99
47260 +.005" oversize. . . . . . . . . . . . . . . . $244.99
47261 +.010" oversize. . . . . . . . . . . . . . . . $244.99
47262 +.020" oversize. . . . . . . . . . . . . . . . $244.99
47263 +.030" oversize. . . . . . . . . . . . . . . . $244.99
WWW.CUSTOMCHROME.COM
Replacement Piston Circlips
47249 Fit most Wiseco® pistons
(sold in pairs). . . . . . . . . . . . . . . . . . $4.99
CHEMICALS
GENERAL
9.31
CROSS
REFERENCE
WISECO PISTON KITS
For 1340cc Shovelhead Models
from 1978 thru 1984
31/2" Bore with 41/4" Stroke and 9.5:1 Compression
For use with stock heads.
47018 Standard . . . . . . . . . . . . . . . . . . . . . . $209.99
47019 +.010" oversize. . . . . . . . . . . . . . . . $209.99
47020 +.020" oversize. . . . . . . . . . . . . . . . $209.99
47021 +.030" oversize. . . . . . . . . . . . . . . . $209.99
47022 +.040" oversize. . . . . . . . . . . . . . . . $209.99
For 1200cc Evolution® Sportster® and
Buell® Models with Thunderstorm™
Cylinder Heads from 1988 thru 2003
Designed for use with 1998 thru 2002 Buell®
Thunderstorm™ cylinder heads. Use stock
piston rings (see page 9.27).
31/2" Bore with 313/16" Stroke and 10:1 Compression
47265 Standard . . . . . . . . . . . . . . . . . . . . . . $244.99
47266 +.010" oversize. . . . . . . . . . . . . . . . $244.99
47267 +.020" oversize. . . . . . . . . . . . . . . . $244.99
Replacement Moly Ring Sets
33/4"-Bore Piston Kits for Evolution®
Big Twin Models from 1984 thru 1999
These kits were designed for use with stock
1340cc Big Twin cylinder heads (not Screamin’
Eagle® ), but the crankcases must be bored
to accept larger cylinders. Due to strength
concerns these kits are only recommended for
use with aftermarket crankcases or Original
Equipment crankcases from 1984 thru 1989
and from 1996 thru 1999.
33/4" Bore with 45/8" Stroke and 10.5:1 Compression
Increases engine size to 103 cubic inches and
includes head and base gaskets.
47417 Standard . . . . . . . . . . . . . . . . . . . . . . $259.99
Sold in sets for one piston.
47041 Standard . . . . . . . . . . . . . . . . . . . . . . . $25.99
47043 +.010" oversize. . . . . . . . . . . . . . . . . $25.99
47042 +.020" oversize. . . . . . . . . . . . . . . . . $25.99
47044 +.030" oversize. . . . . . . . . . . . . . . . . $25.99
47045 +.040" oversize. . . . . . . . . . . . . . . . . $25.99
47000
Replacement Chrome Ring Set
Sold in sets for one piston.
47395 Standard . . . . . . . . . . . . . . . . . . . . . . . $25.99
ENGINE
9
For 1000cc Sportster® Models
from 1972 thru 1985
47005
35/16" Bore with 313/16" Stroke and 10:1 Compression
For use with stock heads.
47000 Standard . . . . . . . . . . . . . . . . . . . . . . $189.99
47001 +.010" oversize. . . . . . . . . . . . . . . . $189.99
47002 +.020" oversize. . . . . . . . . . . . . . . . $189.99
47003 +.030" oversize. . . . . . . . . . . . . . . . $189.99
47004 +.040" oversize. . . . . . . . . . . . . . . . $189.99
Replacement Moly Ring Sets
For 1200cc Panhead and Shovelhead
Models from 1948 thru 1980
37/16" Bore with 331/32" Stroke and 9:1 Compression
For use with stock heads.
47005
Standard. . . . . . . . . . . . . . . . . . . . $189.99
47006 +.010" oversize. . . . . . . . . . . . . . . . $189.99
47007 +.020" oversize. . . . . . . . . . . . . . . . $189.99
47008 +.030" oversize. . . . . . . . . . . . . . . . $189.99
47009 +.040" oversize. . . . . . . . . . . . . . . . $189.99
47010 +.050" oversize. . . . . . . . . . . . . . . . $189.99
47011 +.060" oversize. . . . . . . . . . . . . . . . $189.99
47012 +.080" oversize. . . . . . . . . . . . . . . . $189.99
Replacement Moly Ring Sets
Sold in sets for one piston.
47035 Standard . . . . . . . . . . . . . . . . . . . . . . . $25.99
47036 +.010" oversize. . . . . . . . . . . . . . . . . $25.99
47037 +.020" oversize. . . . . . . . . . . . . . . . . $25.99
47038 +.030" oversize. . . . . . . . . . . . . . . . . $25.99
47039 +.040" oversize. . . . . . . . . . . . . . . . . $25.99
47040 +.050" oversize. . . . . . . . . . . . . . . . . $25.99
47041 +.060" oversize. . . . . . . . . . . . . . . . . $25.99
47042 +.080" oversize. . . . . . . . . . . . . . . . . $25.99
9.32
47072
Sold in sets for one piston.
47030
Standard. . . . . . . . . . . . . . . . . . . . . $25.99
47031 +.010" oversize. . . . . . . . . . . . . . . . . $25.99
47032 +.020" oversize. . . . . . . . . . . . . . . . . $25.99
47033 +.030" oversize. . . . . . . . . . . . . . . . . $25.99
47034 +.040" oversize. . . . . . . . . . . . . . . . . $25.99
For 1200cc Evolution® Sportster® and
Buell® Models from 1988 thru 2003
Designed for use with stock heads, but not
with 101hp Thunderstorm™ heads. Use stock
piston rings (see page 9.32).
883cc to 1200cc Conversion Kits
for Evolution® Sportster® Models
from 1986 thru 2003
Increases the displacement of 883cc models to
1200cc without needing to modify the valves
or combustion chambers which are different
than those in the 1200. The reverse dome
pistons should not be used as replacement
pistons in 1200cc models.
31/2" Bore with 313/16" Stroke and 9.5:1 Compression
47072
47073
47074
47075
Standard . . . . . . . . . . . . . . . . . . . . . . $249.99
+.010" oversize. . . . . . . . . . . . . . . . $249.99
+.020" oversize. . . . . . . . . . . . . . . . $249.99
+.030" oversize. . . . . . . . . . . . . . . . $249.99
31/2" Bore with 313/16" Stroke and 10:1 Compression
47250 Standard . . . . . . . . . . . . . . . . . . . . . . $249.99
47251 +.010" oversize. . . . . . . . . . . . . . . . $249.99
47252 +.020" oversize. . . . . . . . . . . . . . . . $249.99
Replacement Moly Ring Sets
Sold in sets for one piston.
47041 Standard . . . . . . . . . . . . . . . . . . . . . . . $25.99
47043 +.010" oversize. . . . . . . . . . . . . . . . . $25.99
47042 +.020" oversize. . . . . . . . . . . . . . . . . $25.99
47044 +.030" oversize. . . . . . . . . . . . . . . . . $25.99
47045 +.040" oversize. . . . . . . . . . . . . . . . . $25.99
Replacement Piston Circlips
47249 Fit most Wiseco® pistons (sold in
pairs) . . . . . . . . . . . . . . . . . . . . . . . . . $4.99
31/2" Bore with 313/16" Stroke and 9:1 Compression
47078 +.010" oversize. . . . . . . . . . . . . . . . $244.99
47079 +.020" oversize. . . . . . . . . . . . . . . . $244.99
31/2" Bore with 313/16" Stroke and 10.5:1 Compression
47253 Standard . . . . . . . . . . . . . . . . . . . . . . $244.99
47254 +.010" oversize. . . . . . . . . . . . . . . . $244.99
47255 +.020" oversize. . . . . . . . . . . . . . . . $244.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
PISTON KITS
For Evolution®
Sportster® Models
For Early
Sportster® Models
1000cc
9:1
APPAREL
1200cc
9:1
STD.
16908
$27.99
STD.
16941
$27.99
.010
16909
$27.99
.005
16942
$27.99
.020
16910
$27.99
.010
16943
$27.99
.030
16911
$27.99
.020
16944
$27.99
.040
16912
$27.99
.030
16945
$27.99
.050
16913
$27.99
.040
n/a
.060
16914
$27.99
.070
16915
$27.99
INDEX
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
For Panheads
and Shovelheads
For Evolution®
Big Twin Models
1200cc
8.5:1
1340cc
8:1
STD.
16916
16924
$27.99
STD.
16929
$27.99
.010
16917
16925
$27.99
.005
16930
$27.99
.020
16918
16926
$27.99
.010
16931
$27.99
.030
16919
16927
$27.99
.020
16932
$27.99
.040
16920
16928
.030
16933
$27.99
.050
16921
n/a
.060
16922
n/a
.070
16923
n/a
ELECTRICAL
1340cc
8.5:1
EXHAUST
INTAKE
Motor Factory® Pistons
These cast aluminum pistons provide a lower-cost alternative. They’re
available in stock compression versions only and come with fitted
wrist pins and late-style piston ‘E’ clips. The pistons for Panhead and
Shovelhead Big Twins feature integral steel struts for expansion and distortion control. All pistons will accept our replacement Motor Factory®
piston rings. Sold each.
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
S&S Forged Piston Kits
Replacement Pistons for S&S Engines and Hot Setup Kits
Standard
1984-1999 35/8"-bore for
88", 93" and 96" engines
1936-1984 35/8"-bore
for 82", 88", 93" and 98"
engines with stock
or S&S heads
Rings for 1936-1984
pistons ONLY
SHEETMETAL
+.010"
+.020"
+.030"
45804
45855
n/a
n/a
$319.99
$319.99
45880
45881
45882
45883
$309.99
$309.99
$309.99
$309.99
45884
45885
45886
45887
$29.99
$29.99
$29.99
$29.99
S&S pistons are designed with maximum piston/engine life and performance in mind. Features include:
• Offset wrist pin to reduce piston slap and noise
• Piston-to-piston clearance at the bottom of the stroke is concentrated
in the rear piston so a longer piston skirt can be maintained on the
most critical area - the rear of both pistons
Fit Big Twins from 1936 thru 1999 with stock or overlength 35/8" Big
Bore cylinders, and strokes from 331/32" (stock 74") to 43/4" as well as
45/8" stroke S&S Sidewinder® kits. Each piston includes rings, wrist pin
and wrist pin keepers. Replacement ring sets are sold each (one set for
one piston).
WWW.CUSTOMCHROME.COM
9.33
GAUGES
CHEMICALS
GENERAL
CROSS
REFERENCE
MOTOR FACTORY PISTON RINGS BY HASTINGS
Motor Factory® Piston Rings
These ring sets are manufactured by Hastings® and are the ideal combination of design and materials that work together as a team, delivering
full power and lasting oil and blow-by control. All ring faces are prelapped for easier seating, and in the moly sets, the compression ring
features a moly insert on its barrel face design. The exclusive Flex-Vent
oil control ring is the easiest of all designs to install because there are
no right sides up or sides down. It can’t overlap, can’t gouge and can’t
be installed wrong. The 80-plus shoulders on the die-formed stainless-
steel stress relieved spacer-expander exerts uniform pressure on the
rails assuring positive oil control, and with its open design affords 200%
greater drainage capacity than conventional designs. Even with all these
features, Hastings® rings are made available by Custom Chrome® at a
low, affordable cost, resulting in the ideal combination of performance
and value.
All Motor Factory® Piston Rings are sold in sets for two pistons with the exception of the rings
for 883cc and 1100cc Evolution® Sportster® models, which are sold in single cylinder sets only.
For Sportster® Models
ENGINE
9
Std.
1000cc
MOLY
1972E-1985
CAST
883cc
MOLY
1100cc
MOLY
1200cc
23001 . . . . . . . $31.99
23030 . . . . . . . $21.99
23080 . . . . . . $19.99
23090 . . . . . . $24.99
23100 . . . . . . $28.99
23110 . . . . . . $24.99
MOLY
CAST
.005
n/a
n/a
23081 . . . . . . $19.99
n/a
23101 . . . . . . $28.99
23111 . . . . . . $24.99
.010
23002 . . . . . . . $31.99
23031 . . . . . . . $21.99
23082 . . . . . . $19.99
n/a
23102 . . . . . . $28.99
23112 . . . . . . $24.99
.020
23004 . . . . . . . $31.99
23032 . . . . . . . $21.99
23083 . . . . . . $19.99
n/a
23103 . . . . . . $28.99
23113 . . . . . . $24.99
.030
23005 . . . . . . . $31.99
23033 . . . . . . . $21.99
n/a
23104 . . . . . . $28.99
23114 . . . . . . $24.99
.040
23006 . . . . . . . $31.99
23034 . . . . . . . $21.99
23085 . . . . . . $19.99
n/a
n/a
.050
23007 . . . . . . . $31.99
23035 . . . . . . . $21.99
.060
23008 . . . . . . . $31.99
23036 . . . . . . . $21.99
.070
23009 . . . . . . . $31.99
23037 . . . . . . . $21.99
n/a
Sold in single cylinder sets
For Big Twin Models (except Twin Cam 88® Models)
1200cc 1948-1980
MOLY
CAST
Std.
1340cc 1978E-1983
MOLY
CAST
L1983-1984 Shovel
MOLY
CAST
1984-2000 Evolution®
MOLY
CAST
23010 . . . $32.99
23038 . . . $24.99
23023 . . . $32.99
23046 . . . $24.99
23100 . . . $28.99
23110 . . . $24.99
23100 . . . $28.99
23110 . . . $24.99
.005
n/a
n/a
n/a
n/a
23101 . . . $28.99
23111 . . . $24.99
23101 . . . $28.99
23111 . . . $24.99
.010
23011 . . . $32.99
23039 . . . $24.99
23024 . . . $32.99
23047 . . . $24.99
23102 . . . $28.99
23112 . . . $24.99
23102 . . . $28.99
23112 . . . $24.99
.020
23012 . . . $32.99
23040 . . . $24.99
23025 . . . $32.99
23048 . . . $24.99
23103 . . . $28.99
23113 . . . $24.99
23103 . . . $28.99
23113 . . . $24.99
.030
23013 . . . $32.99
23041 . . . $24.99
23026 . . . $32.99
23049 . . . $24.99
23104 . . . $28.99
23114 . . . . . 0.00
23104 . . . $28.99
23114 . . . $24.99
.040
23014 . . . $32.99
n/a
n/a
n/a
n/a
n/a
n/a
n/a
.050
n/a
n/a
.060
n/a
23044 . . . $24.99
.070
n/a
n/a
1/16" Compression rings
3/16" Oil rings
1/16" Compression rings
5/32" Oil rings
1/16" Compression rings
5/32" Oil rings
For Twin Cam 88® & 95" Models
33/4" 1450cc
1999-Up
MOLY
37/8" 1550cc
1999-Up
MOLY
58920 . . . . . . . . . .$38.99
58900 . . . . . . . . . .$45.99
.005
58921 . . . . . . . . . .$38.99
58901 . . . . . . . . . .$45.99
.010
58922 . . . . . . . . . .$38.99
58902 . . . . . . . . . .$45.99
.020
58923 . . . . . . . . . .$38.99
58903 . . . . . . . . . .$45.99
.030
58924 . . . . . . . . . .$45.99
58904 . . . . . . . . . .$45.99
1.5mm Compression rings
3.0mm Oil rings
1.5mm Compression rings
2.5mm Oil rings
Std.
9.34
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
BIG BORE . CYLINDER KITS
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
RevTech® 80" to 88" Big Bore Kits
Original Equipment Cylinder and Piston Sets
Get the benefits of better cooling, larger displacement and increased
horsepower. Fits all Evolution® Big Twin motors from 1984 thru 1999
with stock cylinder stud locations to create an 88" motor. Kit includes
two 35/8"-bore cylinders, two 35/8" cast pistons, two base gaskets, two
cylinder-to-head gaskets and two oil control jets with o-rings. Some case
machining is required.
58560 Natural aluminum cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $499.99
These are Original Equipment parts. Sets are available to fit all Evolution®
models and include one cylinder, one piston, and one ring set.
75500 Natural aluminum for Big Twin models from 1984 thru 1999
(repl. OEM 16510-83A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $329.99
75501 Black with machined fins for Big Twin models from 1984 thru
1999 (repl. OEM 16512-86A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $329.99
ELECTRICAL
EXHAUST
INTAKE
RevTech® 95" Big Bore Kits with Forged Pistons for
Twin Cam 88® Models
ENGINE
There’s no replacement for displacement! These 37/8" big bore cylinders with forged
pistons increase displacement to 95" and raise compression to 9.38:1. Bolts to stock stud
location with no machining required.
Each kit includes:
• RevTech® 37/8" cylinders with machined fin edges in black-wrinkle or natural finishes
• Molycoated Wossner 37/8" bore forged slipper-skirt pistons with rings
• Complete Cometic top-end gasket kit for 95" conversion
• Fit Twin Cam 88® models from 1999 thru 2007
658490 Black wrinkle finish. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $659.99
658491 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $669.99
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
011111
FRAMES
FORKS
& SHOCKS
011110
SHEETMETAL
GAUGES
35/8" Big Bore Cylinders for Shovelheads
Cast iron 35/8"-bore cylinders offer a lower cost alternative to engine
builders. Available in two lengths: standard for stock strokes (331/32",
41/4") or 43/8" flywheels, or +.200" longer for use with 41/2", 45/8" or
43/4" stroker kits. Fit Shovelhead models from 1966 thru 1984. Sold each
without pistons.
011110 Standard-length front cylinder (5.330"-tall). . . . . . . . . . . . . $159.99
011111 Standard-length rear cylinder (5.330"-tall). . . . . . . . . . . . . . $159.99
011113 .200"-longer rear cylinder (5.530"-tall) . . . . . . . . . . . . . . . . . $159.99
RevTech® 883cc to 1200cc Conversion Kit
for Evolution® Sportster® Models
CHEMICALS
These kits feature Wiseco forged pistons and rings, and RevTech® cylinders and gaskets. They fit Evolution® 883 Sportster® models from 1986
thru 2003, and don‘t require any head work. Cylinders must be honed
to final size.
58586 10:1 compression ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $759.99
WWW.CUSTOMCHROME.COM
9.35
GENERAL
CROSS
REFERENCE
CYLINDERS
RevTech® HighPerformance
Shovelhead
Cylinder Set
51113
51112
Cylinders for
Evolution® Models
Our replacement aluminum
cylinders feature cast iron
sleeves for excellent wear and
heat dissipation. Bored for
standard 80" or 1200cc pistons.
Final honing is required. Fits
front and rear on Evolution®
engines listed. Sold each without piston.
Natural Finish
51112
Fits Big Twins 1984 thru 1999 (31/2" bore) . . $169.99
51113
Fits XL 1200cc 1986 thru 2003 (31/2" bore) . $159.99
Black with Polished Fins
011177 Fits XL 1200cc 1986 thru 2003 (31/2" bore) . $189.99
These cylinders are cast
of a specially-formulated
iron alloy that’s charged
with a much higher
chromium content than
is typically used. This
results in improved ring
compatibility and much
better wear resistance.
The RevTech® cast iron
alloy demonstrates
greatly increased
strength at elevated
temperatures and resists thermal shock loads 2.4 times greater than conventional
cast iron. The RevTech® cylinder design strengthens the casting’s ‘foundation’ and its
greatest ‘weak point’... the base. Even the cooling fins have drawn the attention of
RevTech® engineers – they have been redesigned for greater heat dissipation. There
is an attention to detail and ease of assembly that isn’t commonly found in highperformance products. The special design base nuts offer greater strength while the
cylinder base nut reliefs are fully machined to insure clearance for both the nut and
a normal closed end wrench, so they can easily be tightened to the correct torque
specifications. RevTech® cylinder head bolts are forged from 4140 chromemoly steel,
then heat-treated. Even the gaskets are of a special design and material that is formulated to adhere under the most extreme heat and pressure. Sold in pairs.
58030 35/8"-bore, stock length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $619.99
13155 Replacement set of two head and two base gaskets . . . . . . . . . . . . . . . . . . . . $12.99
ENGINE
9
S&S Cylinders
for Shovelhead Models
Cast cylinders for 74", 80" and Big
Bore Shovelhead motors from 1966
thru 1984. Sold in pairs.
45776
35/8"-bore cylinders for 41/4"
stroke (5.330"-long) . $699.99
45946
35/8"-bore cylinders for 43/4"
stroke (5.530"-long) . $699.99
45793
37/16"-bore cylinders (5.330"
long) . . . . . . . . . . . . . . . $699.99
45945
31/2"-cylinders (5.330" long)
S&S Big Bore Cylinders
for Evolution® Big Twin Models
These aluminum cylinders fit Evolution® models from 1984
thru 1999 feature cast iron sleeves for excellent wear and
performance characteristics. Includes front and rear cylinders bored for 35/8" big bore pistons.
45785
5.565"-long works with 45/8" stroke
flywheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $499.99
. . . . . . . . . . . . . . . . . . . . $699.99
Note: 35/8" bore cylinders require the use of S&S
cylinder head bolts
011109
011100
011108
011102
Cylinders for 74" Panheads
Quality cast iron cylinders for Panhead models 1948-1965. Wall thickness
is designed for use with 74" or 80" bore. Cylinders come bored for standard 74" (1200cc), 37/16" bore pistons. 5.330" stock length. Final honing
is required. Pistons are not included. See page 9.24 for pistons
and see page 9.27 for rings. Sold each.
011100 Front (repl. OEM 16483-48) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
011102 Rear (repl. OEM 16492-48) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
9.36
Cylinders for Shovelheads
Cast iron alloy cylinders for Shovelhead engines from 1966 thru
1984. Available bored for standard 74" or 80" pistons. Final honing is
required. Pistons are not included. 5.330" stock length. Sold each.
011104 74" (1200cc) front cylinder (repl. OEM 16484-66). . . . . . . . $149.99
011106 74" (1200cc) rear cylinder (repl. OEM 16492-66). . . . . . . . . $149.99
011109 80" (1340cc) front cylinder (repl. OEM 16498-80A) . . . . . . $139.99
011108 80" (1340cc) rear cylinder (repl. OEM 16499-80A) . . . . . . . $149.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
CYLINDER HEADS . BOLT KITS
INDEX
APPAREL
75400
SEATS
& BAGS
FOOT
CONTROLS
59655
Replacement Head Bolts
Head bolts for Twin Cam 88® and Evolution Big Twin and Sportster®
models from late 1985 to present. Sold each.
59655 Zinc-plated outer (repl. OEM 16480-92). . . . . . . . . . . . . . . . . . . . . $4.49
59657 Chrome-plated outer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99
75400 Zinc-plated inner (repl. OEM 16478-85A) . . . . . . . . . . . . . . . . . . . $3.99
75401 Set of eight: four each CC #59655, four each CC #75400 . . . . $21.99
HAND
CONTROLS
LIGHTING
ELECTRICAL
Shovelhead
Big Bore
Head Bolt Kit
S&S ‘Super Stock™’ Cylinder Heads
for Shovelhead Models
S&S starts with the same high grade materials developed for air cooled
aircraft engines. Machined using state-of-the-art CNC machines to ensure
consistent quality. Heads are dimensionally the same as stock heads for
bolt on installation. Fully compatible with OEM exhaust and intake manifolds clearance problems are nonexistent. Slightly different intake and
exhaust port shapes typically yield a flow increase of 10 CFM. Complete
assembled heads include S&S .550" lift springs, 1980 thru 1984 style cast
iron valve guides and seals and collars and keepers. Includes all necessary
gaskets and hardware. Installation of rocker box assemblies (not included)
is done using hex cap screws provided. Available in stock bore with single
plug and 35/8" bore with single or dual plugs.
45902 Stock bore for 1979 thru 1984 rubberband intake manifolds
EXHAUST
Twelve-point, grade 8 head
bolts with machined heads
and washers to clear bigbore barrels. Will also work
on stock barrels.
36192 Black oxide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.99
36277 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $43.99
INTAKE
ENGINE
GASKETS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,299.99
45903 35/8" bore for 1979 thru 1984 rubberband intake manifolds
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,299.99
TRANNY
& CLUTCH
45900 Stock bore for 1966 thru 1978 O-ring intake manifolds . . $1,299.99
45901 35/8" bore for 1966 thru 1978 O-ring intake manifolds . . $1,299.99
85078 35/8" bore dual plug for 1979 thru 1984 rubberband intake manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,299.99
DRIVELINE
WHEELS,
TIRES
& BRAKES
Colony Head Bolt Kits
Machined from high-strength steel and hardened to prevent stretching.
Feature rolled threads and cadmium-plating.
36012
Fits Panheads and Shovelheads from 1948 thru 1984 . . . . . $31.99
FRAMES
FORKS
& SHOCKS
SHEETMETAL
S&S Super Stock™ Cylinder Heads for
Evolution® Big Twin Engines
GAUGES
• 2.00" intake valves and 1.605" exhaust valves
• Special “cast-to-shape” intake ports with a special
directional fin for improved air flow
• Precision CNC-machined from heat-treated aircraftquality aluminum castings
• Complete assembled heads contain premium valves and
S&S .640"-lift valve springs
• Fits all Evolution® Big Twins with stock bore and stroke
from 1984 thru 1999
601726 Natural finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . $929.99
S.T.D. Pan/Shovel Cylinder Heads
Designed for Panhead and Shovelhead
1200cc barrels. Shovelhead O-ring style intake
manifold ports. They require the use of 1948
thru 1979 Big Twin valve guides, Shovelhead
valves, exhaust pipes and intake manifold.
However, Panhead rocker arm assemblies must
be used (use CCI #36152 or OEM 12-point
head bolts).
17118 Sold in sets . . . . . . . . . . . . . . . . . . .$1,299.99
WWW.CUSTOMCHROME.COM
Kibblewhite
Cylinder Dowels
Precision-machined cylinder
locating dowels for all Evolution®
Big Twins 1984 thru 1999.
55137 Set of 4 . . . . . . . . . . . $11.99
9.37
CHEMICALS
GENERAL
CROSS
REFERENCE
CYLINDER HEAD ACCESSORIES
36144
36178
TP Pro-Series®
Compression Releases
S&S Electric
Compression Release Kit
ENGINE
9
Solenoid operated to automatically open
when the starter button is depressed, and
automatically close when the starter button
is released. Very convenient and simple to
use. When installed on SSW+ or Twin Cam 88®
engines, they require the use of S&S die-cast
rocker covers for Twin Cam 88® engines, or
similar covers with a central hole or “chimney.” These “chimneys” provide clearance for
the solenoids that operate the compression
releases. Electric compression releases are also
compatible with Original Equipment or S&S
rocker boxes for Evolution® engines.
601710 Complete kit . . . . . . . . . . . . . . . . $299.99
Compression releases make starting your highcompression or large-displacement engine
virtually effortless. Self-releasing valves
manufactured from stainless steel with a billet
aluminum push-button.
687312 Standard release
(sold each) . . . . . . . . . . . . . . . . . . . $29.99
TP Pro-Series® Customizable
Compression Releases
With the same functionality as our Pro-Series®
Compression Releases, our Customizable
Compression Releases are manufactured to
accept any custom tire valve stem cap you supply to function as the push-button.
687313 Customizable release
(sold each) . . . . . . . . . . . . . . . . . . . $34.99
36143
36142
Sets of high-torque cylinder base nuts for all
big bore or stock 74" and 80" cylinders.
36142
Chrome . . . . . . . . . . . . . . . . . . . . . . $25.99
36143
Black oxide . . . . . . . . . . . . . . . . . . $22.99
Automatic
Compression Releases
9.38
Early-Style ‘Acorn’ Base Nuts
36144
Fits 1936-early 1977 Big Twins. $16.99
Late-Style
9/16" hex size permits use of a box wrench.
36178
Fits late 1977 thru 1984 Shovelhead
models . . . . . . . . . . . . . . . . . . . . . . $21.99
36196
Colony Cylinder Base Nuts
Save your starter and battery from the
unneeded wear and tear caused by big inch
motors. These handy devices are used in conjunction with 2-plug heads and are a breeze
to use. Install one in each of the right side
plug holes, push down the cap and hit the
starter or kick‘er over. Your bike will start as
if it were easier than stock and when it does
start, the compression release valves will close
automatically. This makes your high compression motor streetable or enables your motor
to start with a weak battery. Available in
12mm and 14mm to fit most motors. Sold in
pairs.
010186 14mm thread, 3/4" reach . . . . $214.99
010187 12mm thread, 3/4" reach . . . . $214.99
Colony Cylinder Base Nuts
Colony Cylinder
Hardware
36053
36194
Stud sets feature
heat-treated, interference-fit threaded
studs. Cylinder
reinforcement wash36193
ers are available in
chrome-plated or
black oxide finishes.
Cylinder Base Stud Sets
Sold in sets.
36193
Fits Big Twins from 1930 thru 1977
(repl. OEM 16831-30) . . . . . . . . . $25.99
36194
Fits Shovelheads from 1978 thru
1984 (repl. OEM 16837-78). . . . $25.99
Cylinder Base Washer Sets
Fits Big Twin models 1978 thru 1984.
36196
Chrome . . . . . . . . . . . . . . . . . . . . . . $19.99
36197
Black oxide (repl. OEM
16836-78) . . . . . . . . . . . . . . . . . . . . $12.99
Kibblewhite Cylinder Studs
for Evolution® Models
Cylinder Stud Sets for Evolution® Engines
Sold in sets.
36053
Fits Evolution® Big Twin models from
late 1985 thru 1999
(repl. OEM 16837-85C). . . . . . . . $64.99
36107
Fits Evolution® Sportster® models
late 1986 thru 2003
(repl. OEM 16832-87A) . . . . . . . $62.99
Completely-ground outside-diameter,
black oxide coated, and rolled threads.
Sets of 8.
55135
Fits Evolution® Big Twin models
from 1984 thru 1999 . . . . . . . . . $71.99
55136
Fits Evolution® Sportster® models
from 1986 thru 2003 . . . . . . . . . $71.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
HEAD BOLT COVERS
INDEX
APPAREL
SEATS
& BAGS
Before
After
FOOT
CONTROLS
‘Elite
Chrome’
Head Bolt Covers
by Accutronix
Covers eliminate the unwanted appearance
of normal head bolts. Set of 4.
44584 Fits all Evolution® and Twin Cam 88®
models from late 1985 thru 2007 $64.99
Slotted Head Bolt Covers
HAND
CONTROLS
These chrome die-cast covers feature radial
slots that blend with cylinder head fins. Fits
all Evolution® Big Twin and Sportster® models
from late 1985 thru 2003.
011136 Sold in sets of 4 . . . . . . . . . . . . . . $19.99
LIGHTING
ELECTRICAL
Finned Head Bolt and
Spark Plug Covers
These sand-cast covers incorporate an innovative mounting bracket that is securely
attached to Original Equipment head bolts
with set screws and holds the cover firmly
in place. They look completely natural, yet
give your motor a whole new look. Fit all
Evolution® Big Twin and Sportster® motors
from 1986 thru 2003. Sold in pairs.
14350 Black finish with bright fins . . . . . $69.99
Chrome Head Bolt Covers
Designed to dress-up the stock 1/2" 12-point
head bolts fitted to all Evolution® Big Twin
and Sportster® models from late 1985 thru
2003. They attach with sockethead set screws
and come complete with the necessary
wrench.
14309 Set of four covers . . . . . . . . . . . . . . $14.99
EXHAUST
INTAKE
ENGINE
Spark Plug and Head Bolt Covers
by KüryAkyn™
Simply push over the spark plugs to cover
them and the head bolts. Chrome-plated diecast construction. Sold in pairs.
48018 Fits all Evolution® Big Twin and
Sportster® models from 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
Scorpion™ Head Bolt Covers
for Twin Cam 88® Models by
KüryAkyn™
Add a classy touch with this easy to install
design. Securely held in place with set screws.
Sparkplugs can be removed without taking
off the covers.
48271 Fits Twin Cam 88® models from 1999
thru 2007 . . . . . . . . . . . . . . . . . . . . . . $49.99
SHEETMETAL
Brass Head Bolt Covers by Crime Scene Choppers
Brass is a hot look on retro rides, and these brass head bolt covers lend a cool retro flair to any
Evo or Twin Cam powered ride. The covers simply slip over the existing head bolts, and are
secured with set screws, provided. CNC machined out of brass billet, they are sold with a fine
machined finish that looks awesome! Set of four. Made in USA by Crime Scene Choppers.
632666 Brass Head Bolt Cover Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99
GAUGES
CHEMICALS
GENERAL
WWW.CUSTOMCHROME.COM
9.39
CROSS
REFERENCE
RETAINING RINGS . TIMING HOLE PLUGS
Engine Retaining Rings
OEM #
Part #
Qty.
Fit Information
11002
11007
11177
11177A
22582-52
22588-78
22589-83
24701-52
24701-54
24702-40
25810-15
26348-36
54000
49106
12201
12202
49118
49119
49120
49121
49122
49123
49124
54250
10
10
10
10
10
10
10
10
10
10
10
10
Oil pump. Fits Big Twins from 1957-early 1962 as well as Sportster® models from 1972 thru 1976 and 1991 thru 2003 . . . . $2.49
Pinion shaft bearing. Fits Big Twins from 1958 thru 1986. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.39
Right main bearing. Fits Big Twin and Sportster® models from 1987 thru 1994 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99
Right main bearing. Fits Big Twin models from 1995 thru 1999 and Sportster® models from 1995 thru 2003 . . . . . . . . . . . . . $9.99
Piston pin. Fits Big Twins from 1973-early 1977 and Sportster® and K models from 1952-late 1977 . . . . . . . . . . . . . . . . . . . . . . $3.99
Piston pin. Fits Big Twins from late 1977-early 1983 and Sportster® models from late 1977-early 1985 . . . . . . . . . . . . . . . . . . . $4.99
Piston pin. Fits most models from late 1983 to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99
Sprocket shaft bearing. Fits Sportster® and K models from 1952 thru 1976 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.19
Pinion shaft bearing. Fits Big Twins from 1955 thru 1957 and Sportster® and K models from 1954 thru 1976. . . . . . . . . . . . . $6.59
Sprocket/pinion bearing. Fits Big Twins from 1940 thru 1954 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.89
Idler gear stud. Fits OHV Big Twins from 1932 thru 1957 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.09
Oil pump drive shaft. Fits OHV Big Twins with external oil pump from 1936 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99
ENGINE
9
12279
12278
36062
36068
36080
36110
Timing Hole and Oil Tank Plugs
Clear View Timing Hole Plug
The best see-thru timing plug you can buy. Fits
all models. Temporarily remove the stock timing plug and
insert this top-quality tool for easy timing.
12278
Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99
Plastic Timing Hole Plug
Made of clear, durable Lucite and sold as a lower cost alternative to our Clear View plug.
12279
Individual clear timing plug. . . . . . . . . . . . . . . . . $3.59
12280
Shop supply card of 10 plugs. . . . . . . . . . . . . . . $45.99
Colony Chrome Timing Hole Plugs and Oil Tank Plugs
Fits timing holes and oil tanks with 5/8"-18 threads.
36068
Acorn head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.99
36080
Stock replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.59
36110
Custom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99
Colony ‘Hex Head’ Timing Hole Plug and Oil Tank Plug
Fits timing holes and oil tanks with 5/8"-18 thread. Also fits the
transmission filler hole on
all 45" models thru 1940.
36186
Chrome (not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.49
Colony Oversize Timing Hole Plug with Tap
Kit contains one acorn head plug with oversize threads and
a tap for rethreading the stripped-out timing hole.
36062
Complete kit (11/16"-16 TPI) . . . . . . . . . . . . . . . $35.99
36072
Oversize timing plug only (11/16"-16 TPI). . . . $7.99
9.40
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
MANLEY . JIMS VALVE GUIDES
99013
Exhaust (nitrided stems) repl. OEM
18082-57A . . . . . . . . . . . . . . . . . . . $61.99
INDEX
APPAREL
Manley ’Severe Duty ’
Stainless Steel Valves (continued)
®
SEATS
& BAGS
For 1948 thru 1965 Panhead Engines
99028 Intake (repl. OEM 18071-48) . . . . $69.99
99013 Exhaust (nitrided stems) repl. OEM
18082-57A . . . . . . . . . . . . . . . . . . . . . $61.99
Manley ’Severe Duty ’
Stainless Steel Valves
®
Designed to outflow stock valves. Manufactured from high temperature materials with
swirl polish and performance oriented shapes.
Feature choice of chrome or nitride finished
stems to eliminate galling. Impervious to heat
and unleaded fuels. Sold in pairs.
For Twin Cam 88® Engines from 2005
thru 2007
699040 Intake (1.805" heads). . . . . . . . . $49.99
699042 Oversize intake (1.900" heads) $49.99
699041 Exhaust (1.575" heads) . . . . . . . $49.99
699043 Oversize exhaust (1.625" heads)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99
For Twin Cam 88® Engines from 1999
thru 2004
99082
Intake (1.850" heads) repl. OEM
18074-83. . . . . . . . . . . . . . . . . . . . . $71.99
99086
Intake with nitrided stems (1.850"
heads) repl. OEM 18074-83 . . . $69.99
99115
Oversize intake (1.900" heads) $71.99
99092
Oversize intake (1.940" heads) $71.99
99084
Oversize intake (1.940" heads).
Stems are .060" shorter . . . . . . . $71.99
99014
Oversize intake (2.000" heads) $69.99
99079
Exhaust (1.565" heads) repl. OEM
18085-99. . . . . . . . . . . . . . . . . . . . . $69.99
99078
Exhaust with nitrided stems (1.565"
heads) repl. OEM 18085-99 . . . $69.99
99081
Oversize exhaust (1.615" heads)
For 1958 thru 1985 Sportster® Engines
99034 Intake for models from 1958 thru 1969
(repl. OEM 18070-58) . . . . . . . . . . . $69.99
99032 Intake for models from 1970 thru 1985
(repl. OEM 18070-70) . . . . . . . . . . . $69.99
99000 Exhaust for models from 1958 thru
1985 (repl. OEM 18080-58A) . . . . $69.99
For 1986 thru 2003 Evolution® Sportster®
883cc Engines
99080 Intake (repl. OEM 18031-86) . . . . $69.99
99083 Exhaust (repl. OEM 18030-86) . . . $69.99
For 1987 thru 2003 Evolution® Sportster®
1100cc and 1200cc Engines
99008 Intake (repl. OEM 18023-87) . . . . $74.99
99009 Exhaust (repl. OEM 18024-87) . . . $69.99
For Evolution® Sportster®
883cc to 1200cc Conversion
To fully benefit from 883cc to 1200cc conversions, you need to install larger valves. These
1.48" exhaust and 1.715" intake valves from
1200cc Sportster® models are .060"-shorterthan-stock for the 883cc heads. Forged onepiece stainless steel with chrome stems and
hardened tips
99062 Intake . . . . . . . . . . . . . . . . . . . . . . . . . $69.99
99063 Exhaust . . . . . . . . . . . . . . . . . . . . . . . . $69.99
Oversize exhaust (1.615" heads)
with nitrided stems. . . . . . . . . . . $65.99
For 1984 thru 1999 Evolution®
Big Twin Engines
99082
Intake (1.850" heads) repl.OEM
18074-83. . . . . . . . . . . . . . . . . . . . . $71.99
99086
Intake with nitrided stems (1.850"
heads) repl. OEM 18074-83 . . . $69.99
99115
Oversize intake (1.900" heads) $71.99
99092
Oversize intake (1.940" heads) $71.99
99084
Oversize intake (1.940" heads).
Stems are .060" shorter. Replacement for Branch Heads . . . . . . . $71.99
99014
Oversize intake (2.000" heads) $69.99
99081
Exhaust (1.615" heads) repl. OEM
18082-83. . . . . . . . . . . . . . . . . . . . . $69.99
99087
Exhaust with nitrided stems (1.615"
heads) repl. OEM 18082-83 . . . $65.99
99015
Oversize exhaust (1.650" heads)
repl. OEM 18074-66 . . . . . . . . . . $69.99
For Shovelhead Engines from 1966
thru 1984
99010
Intake (repl. OEM 18074-66) . . $59.99
99012
Intake (nitrided stems) repl. OEM
18074-66. . . . . . . . . . . . . . . . . . . . . $61.99
99011
Exhaust (repl. OEM 18082-57A)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $59.99
HAND
CONTROLS
JIMS® Heavy-Duty Stainless Steel
Replacement Valves
These valves are heat-treated and nitride
processed for excellent wear resistance. They
feature a 45º angle, cut below the lock groove
to reduce stress in this area, as well as making
valve seal installation easier.
Sold each.
Fits Twin Cam 88® Engines from 1999
to Present
671002
Exhaust (1.570" head) repl. OEM
18085-99. . . . . . . . . . . . . . . . . . . . . $29.99
671000
Intake (1.845"head) repl. OEM
18074-83. . . . . . . . . . . . . . . . . . . . . $29.99
Fits Evolution® Big Twin Engines
from 1984 thru 1999
671001 Exhaust (1.615" head) repl. OEM
18082-83. . . . . . . . . . . . . . . . . . . . . $29.99
671000
Intake (1.845"head) repl. OEM
18074-83. . . . . . . . . . . . . . . . . . . . . $29.99
JIMS® Valve Guides for Evolution®
and Twin Cam 88® Motors
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $69.99
99087
FOOT
CONTROLS
Manley ‘Race Master’
Stainless Steel Valves
Use with confidence in modified street
engines. These are a significant upgrade from
Original Equipment and are impervious to
unleaded fuels. Sold in pairs.
For 1966 thru 1984 Shovelhead Engines
99020
Intake (repl. OEM 18074-66) . . $42.99
99021
Exhaust (repl. OEM 18082-57A)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $42.99
For 1984 thru 1999 Evolution® Big Twins
99060
Intake (1.850" heads) repl. OEM
18074-83. . . . . . . . . . . . . . . . . . . . . $49.99
99066
Oversize intake (1.900" heads) $49.99
99064
Oversize intake (1.940" heads) $49.99
99061
Exhaust (1.615" heads) repl. OEM
18082-83. . . . . . . . . . . . . . . . . . . . . $49.99
For 1999 thru 2004 Twin Cam 88® Engines
99060
Intake (1.850" heads) repl. OEM
18074-83. . . . . . . . . . . . . . . . . . . . . $49.99
99066
Oversize intake (1.900" heads) $49.99
99064
Oversize intake (1.940" heads) $49.99
99059
Exhaust (1.565" heads) repl. OEM
18085-99. . . . . . . . . . . . . . . . . . . . . $49.99
99061
Oversize exhaust (1.615" heads)
repl. OEM 18082-83 . . . . . . . . . . $49.99
WWW.CUSTOMCHROME.COM
Valves consist of micrograin cast iron or magnese bronze. This long-lasting, bearing material allows you to fit the valve at a tighter
clearance for better heat dissipation and
longer life!
• CNC-machined
• Special hi-temp, Viton O-ring to prevent
oil infiltration between guide and head
• Non-slip surface helps valve seals
• Tapered and radiused nose for easier installation and better intake and exhaust flow
• Unfinished I.D., ready to be honed or
reamed after installation
• Use with .530" valve seals
Fit both intake and exhaust on all Evolution®
Big Twin and Sportster® models from 1984
thru 2003, and Twin Cam 88® models from
1999 to present. Sold each. . . . . . . . . . . . . . $12.99
Size
Magnese
Bronze
Cast Iron
+.002"
+.003"
+.004"
671005
n/a
671007
n/a
671009
671010
Size
Intake
Exhaust
011760
011761
011762
011763
011764
011770
011771
011772
011773
011774
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
SHEETMETAL
High-Performance Guides
Manganese bronze guides with the same
quality construction and features as our other
JIMS guides, but with a shortened seal area
and tapered for use especially on high lift and
high flow applications. Use with .530" valve
seals. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . $14.99
Std.
+.001"
+.002"
+.003"
+.004"
LIGHTING
GAUGES
CHEMICALS
GENERAL
9.41
CROSS
REFERENCE
VALVES
RevTech® High-Performance
Engine Valves
Kibblewhite Black Diamond®
Valves
ENGINE
9
One-piece stainless stellite-tipped steel valves
are impregnated with a special German process that develops a surface .002" deep in the
valve itself with just .0002" surface build-up to
improve wear properties and reduce friction.
The surface provides resistance to corrosion
and has wear properties superior to hard
chromium and nickel-plating. Valves are lightweight with sectional profiles that provide
excellent flow characteristics.
Sold each.
For Twin Cam 88® Models 1999 thru 2005
55100 Intake (repl. OEM 18074-83A) also fits
Evolution® Big Twin models . . . . . $24.99
55211 Oversize intake (1.90" head) . . . . $24.99
55212 Exhaust 1.565" (repl. OEM 18085-99)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99
For Evolution® Big Twins 1984 thru 1999
55100 Intake (repl. OEM 18074-83A) also fits
88® models . . . . . . . . . . . . . . . . . . . . . $24.99
55101 Oversize intake (1.940" head) . . . $32.99
55103 High-flow racing intake (1.900" head)
4.400"-long, 28º profile angle. . . $24.99
55102 Exhaust (repl. OEM 18082-83) . . . $24.99
55104 High-flow racing exhaust (1.630"
head) 4.520"-long, 44º profile angle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99
For Shovelhead Motors 1966 thru 1984
55140 Intake (repl. OEM 18074-66) . . . . $24.99
55141 Exhaust (repl. OEM 18082-57) . . . $24.99
For 1100/1200cc Evolution® Sportster®
Motors 1987 thru 2003
55162 Intake (repl. OEM 18023-87) . . . . $24.99
55163 Exhaust (repl. OEM 18024-87) . . . $24.99
For Sportster® Motors 1970 thru 1985
55111 Intake (repl. OEM 18070-70) . . . . $24.99
55114 Exhaust (repl. OEM 18080-58R). . $24.99
55115 Oversize exhaust (1.630" head) . $32.99
55116 XLR exhaust (repl. OEM 18080-70R)
.3384" stem, 1.750" head . . . . . . . $32.99
Motor Factory® Stock
Replacement Engine Valves
Motor Factory® engine valves exactly duplicate Original Equipment specifications for
materials and machining but at a lower cost.
Each valve is permanently marked with its
part number to simplify stocking and reordering. Available for Panhead, Shovelhead and
Sportster® motors. Sold each.
For Panhead Motors from 1948 thru 1965
56013 Exhaust (repl. OEM 18086-80, 1808980, 18082-57A) . . . . . . . . . . . . . . . . . $18.99
For Shovelhead Motors from 1966-Early
1981
56015 Intake (repl. OEM 18075-80, 18078-80,
18074-66) . . . . . . . . . . . . . . . . . . . . . . $18.99
56013 Exhaust (repl. OEM 18086-80, 1808980, 18082-57A) . . . . . . . . . . . . . . . . . $18.99
For Shovelhead Motors from Late 1981
thru 1984
56016 Intake (repl. OEM 18075-81, 18078-81)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99
56014 Exhaust (repl. OEM 18086-81, 18089-81)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99
For Sportster Motors from 1958
thru 1969
56019 Exhaust (repl. OEM 18033-80, 18080-58A)
®
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99
For Sportster® Motors from 1970
thru 1985
56020 Intake (repl. OEM 18027-80) . . . . $18.99
56019 Exhaust (repl. OEM 18033-80, 18080-58A)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99
Kibblewhite Black Diamond®
Specialty Valves
Thin or thick stem, one-piece stainless steel stellite-tipped
impregnated valves for Shovelhead models
1966 thru 1984. Sold each.
55201 Thick stem intake (1966 thru 1984) . . . . . . . . . . . $32.99
55202 Thick stem exhaust (1966 thru 1984) . . . . . . . . . $32.99
RevTech® valves combine the latest in engineering (including the ability to deliver highperformance with no lead or low lead fuels)
and the widest range of applications possible
with the fewest part numbers. The valves are
true, one-piece stainless steel, and the stems
are completely nitrided for superior resistance
to galling at high cylinder head temperatures.
The valve stem tip, rather than just being a
swaged-on ‘button,’ is a fully-supported cup
of stellite, formed by first machining a recess
into the stem, then filling it with super-hard
stellite material. The heat-treated material
forming the cup firmly supports the stellite
and distributes the impact shock of the rocker
arm over a wider area. Each valve is clearly
marked with the part number on the stem.
Each part number replaces several Original
Equipment numbers to simplify stocking. For
example, the stems on the late Shovelhead
exhaust valves are machined to .375" diameter, which fits all early and late-style valve
guides when new guides are correctly reamed
to final size. With a minimum number of
valves, all 1948-1981 Big Twin and Sportster®
motors can be upgraded to run on unleaded
or low lead fuels with your own choice of
valve guide material. Sold each.
For Panhead Motors from 1948 thru 1965
58094 Exhaust (repl. OEM 18082-57, 18086-80,
18089-80, 18086-81, 18089-81) . . . $18.99
For Shovelhead Motors 1966 thru 1984
58095 Intake (repl. OEM 18074-66, 18075-80,
18078-80, 18075-81, 18078-81) . . . $18.99
58094 Exhaust (repl. OEM 18082-57, 18086-80,
18089-80, 18086-81, 18089-81) . . . $18.99
For Twin Cam 88® Models 1999 thru 2005
58092 Intake (repl. OEM 18074-83) . . . . $18.99
For Evolution® Big Twins 1984 thru 1999
58092 Intake (repl. OEM 18074-83) . . . . $18.99
58089 Oversize (1.940" head) intake . . . $18.99
58093 Exhaust (repl. OEM 18082-83) . . . $18.99
For Sportster® Motors 1958 thru 1969
58098 Exhaust (repl. OEM 18080-58A, 1803380). . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99
For Sportster® Motors 1970 thru 1985
58099 Intake (repl. OEM 18070-70, 18027-80)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99
58098 Exhaust (repl. OEM 18080-58A, 1803380). . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99
For 883cc Evolution® Sportster® Motors
1986 thru 2003
58080 Intake (repl. OEM 18031-86) . . . . $18.99
For 1100/1200cc Evolution® Sportster®
Motors 1987 thru 2003
58082 Intake (repl. OEM 18023-87) . . . . $18.99
Black Diamond® Conversion Valves
for Evolution® Sportster® Models
Use these Black Diamond® valves when converting your
Evolution® 883cc Sportster® model to 1200cc. Get all the
benefits of high-tech, high-quality valves.
Sold each.
55107 Intake (1.715" head). . . . . . . . . . . . . . . . . . . . . . . . . $24.99
55108 Exhaust (1.480" head) . . . . . . . . . . . . . . . . . . . . . . . $24.99
9.42
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
VALVE SPRING KITS . COMPONENTS
24294
INDEX
APPAREL
SEATS
& BAGS
24295
FOOT
CONTROLS
24296
Andrews Valve Parts for
Twin Cam 88®, Evolution®
and Shovelhead Motors
When installing performance cams, total
spring assembly height should be checked
before operation. The valve spring collars
and springs offered here provide correct total
spring assembly height without complicated
machining on the heads themselves.
High Lift Spring Set
Fits Twin Cam 88® and Evolution® Big Twin and
Sportster® motors. When used with the titanium upper collars listed above, cam lifts of
over .550" can be achieved. Installation does
not require machining.
24198 Set of 4 . . . . . . . . . . . . . . . . . . . . . . . . $35.99
High Lift Spring Set for Shovelheads
For 74" and 80" motors. Provide the correct
spring pressure for Andrews Shovelhead
cams. Installation doesn’t require complicated
machining.
24294 Set of 4 . . . . . . . . . . . . . . . . . . . . . . . . $35.99
HAND
CONTROLS
Manley Valve Spring Lift Kits
S&S Valve Spring Kit
Triple valve spring kit is designed for use with
stock shoulderless guides and valves with
5/16"-diameter stems. It will accommodate
cams with lifts up to .640", and includes steel
top collars that have been drilled for lightness
and to increase cooling. Spring seat pressure is
170 lbs. at the stock 1.800" installed height.
45846 Fits Evolution® Big Twin and
Sportster® engines from 1984 thru
2003 and Twin Cam 88® engines from
1999 to present . . . . . . . . . . . . . . . $134.99
High Lift Upper Collars for Shovelheads
When used with high-lift springs, these collars
for 74" and 80" motors can accommodate
cams of up to .600" lift. Made from T6 aluminum.
24297 Set of 4 . . . . . . . . . . . . . . . . . . . . . . . . $35.99
Increase the amount of valve travel without binding for use with high-performance
camshafts with higher-than-stock lift. Kits
are packaged with reverse wound springs to
reduce harmonics and control spring surge.
Most kits are available with titanium collars
for ultimate performance, or with steel collars as a lower cost alternative. Kits requiring
special machining operations include complete
instructions. Valve keepers are not included.
Lift Kits for 1957 thru 1985
Sportster® Models
Stock-diameter springs with 20% more pressure. Includes steel top collars and uses stock
lower collars. Springs 85 lbs. at 1.310", 295 lbs.
at .820", bind at .790".
99217 Stock to .490" lift . . . . . . . . . . . . . . $95.99
99294 Set of eight valve keepers . . . . . . $29.99
99500 Set of four replacement springs . $49.99
.465" Lift Kits for Shovelheads
Use with stock or Manley thin-stem valves.
Kits include springs, upper collars and use
stock lower collars. Oversize springs require
no machining. Springs 170 lbs. at 1.450", 315
lbs. at .985", bind at .880".
99216 Kit with steel collars for stock stem
diameter valves . . . . . . . . . . . . . . . . $89.99
99295 Set of 8 keepers for CC #99216 . . $21.99
Medium Lift Upper Spring Collars
for Shovelheads
For 74" and 80" motors and designed to add
.060" spring travel to stock springs without
other modifications. Simplify the installation of Andrews ‘B’ or ‘#2’ cams in stock
Shovelhead motors. Heat-treated steel.
24295 Set of 4 . . . . . . . . . . . . . . . . . . . . . . . . $42.99
.650" Lift Kits for Shovelheads
Titanium top collars with steel lower collars
and special interference fit tri-springs. 180 lbs.
at 1.600", 365 lbs. at 1.100", 415 lbs. at .950",
bind at .850".
99225 Kit for stock stem diameter valves
Low Profile Lower Spring Collars
for Shovelheads
Low-profile lower spring collars for 74" and
80" motors. Similar to 1980-up OEM collars,
but low profile for easier installation of high
lift cams. Required if using 1980 or later style
valve guides which use seals like CC #24347.
Made from heat-treated steel.
24296 Set of 4 . . . . . . . . . . . . . . . . . . . . . . . . $35.99
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $169.99
99295 Set of 8 keepers for CC #99225 kit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99
Crane Performance Valve
Spring Kits for Panheads and
Shovelheads
Kits are conveniently packaged with top collars made of either steel or titanium. The
springs are precision wound from finest
quality wire and Magnaflux inspected. Fits all
Panhead and Shovelhead models from 1948
thru 1984.
24174 Spring kit with steel top collars (140
lb. seat pressure) . . . . . . . . . . . . . . . $70.99
Valve Springs Only
Sets of four valve springs in standard or with
Thermo-Cool coated which reduces friction
and disperses heat eliminating hot spots in
the coils. Fits Panhead and Shovelhead models
from 1948 thru 1984.
24173 Standard spring set (140 lb.
seat pressure) . . . . . . . . . . . . . . . . . . $54.99
WWW.CUSTOMCHROME.COM
Lift Kits for Evolution® and
Twin Cam 88® Engines
Fit Big Twin engines from 1984 thru 2004.
No machining required, steel or titanium top
collars used with stock lower collars. Springs
180 lbs. at 1.800", 360 lbs. at 1.250", 400 lbs. at
1.150", bind at 1.020".
99227
Kit with steel collars (.550" lift)$99.99
699240 Kit with steel collars (.600" lift)
FRAMES
FORKS
& SHOCKS
SHEETMETAL
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
699241
99228
99296
Kit with titanium collars
(.600" lift) . . . . . . . . . . . . . . . . . . $189.99
Kit with titanium collars
(.650" lift) . . . . . . . . . . . . . . . . . . $159.99
Set of eight keepers . . . . . . . . . . $29.99
GAUGES
CHEMICALS
GENERAL
9.43
CROSS
REFERENCE
VALVE SPRING KITS . COMPONENTS
Manley ’Severe Duty®’
Valve Train Component Kits
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $309.99
99272 Complete kit with chrome valve stems
and titanium top collars for cams with
.500-.650" lift when installed in 1966
thru 1984 Shovelhead engines . $299.99
ENGINE
9
Feature Manley ’Severe Duty®’ valves, double
spring assemblies, steel or titanium top collars
and machined keys for maximum performance. These spring kits require no machining
for installation.
99277 Complete kit with chrome valve stems
and titanium top collars for cams up
to .650" lift when installed in 1984
thru 1999 Evolution® Big Twins . $319.99
99307 Complete kit with nitrided valve stems
and titanium top collars for cams up
to .650" lift when installed in Twin
Cam 88® engines from 1999 to present
Crane Valve Spring Kits for
Evolution® and Twin Cam 88®
Models
Manley ‘Race Master’ Valve Train
Component Kits
Feature Manley ‘Race Master’ valves, double
spring assemblies, steel or titanium top
collars and machined keys for maximum
performance. These spring kits require no
machining for installation.
Kits for Big Twins from 1966 thru 2004
99275 Kit with steel top collars for cams up
to .550" lift when installed in Twin
Cam 88® engines from 1999 thru 2004
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $229.99
99213 Kit with steel top collars for cams up to
.550" lift when installed in Evolution®
Big Twin engines from 1984 thru 1999
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $229.99
99214 Kit with titanium top collars for cams
from .550"-.650" lift when installed in
Evolution® Big Twin engines from 1984
thru 1999 . . . . . . . . . . . . . . . . . . . . . $279.99
99212 Kit with steel top collars for cams up to
.495" lift when installed in Shovelhead
engines from 1966 thru 1979 . . $215.99
99211 Kit with steel top collars for cams up to
.495" lift when installed in Shovelhead
engines from 1980 thru 1984 . . $215.99
V-Thunder™ Valve Spring Kits
V-Thunder™ kits provide strong street performance with up to .600" lift cams in the
Standard kits or up to .675" lift cams with the
Super kits. For all Evolution® Big Twins 1984
thru 1999.
Super Kits
Include springs, locks, retainers and lower
seats. Spring I.D.-.745", O.D.-1.510". Spring
pressure 184 lb. at 1.850", 422 lb. at 1.280",
bind at 1.08"
30158 Kit with chromemoly retainers . . $79.99
30159 Kit with titanium retainers . . . . . $214.99
Kits for Twin Cam 88® Engines
from 2005 thru 2007
All kits include 1.805" intake valves, 1.575"
exhaust valves, springs, top and lower collars,
and Viton® valve seals.
699280 Kit with steel collars (.600" lift)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $229.99
699281
Kit with titanium collars (.600" lift)
699282
Kit with titanium collars (.650" lift)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $259.99
Standard Kits
Include springs, locks, retainers and lower
seats. Spring I.D.-.700", O.D.-1.460". Spring
pressure 160 lb. at 1.850", 440 lb. at 1.250",
bind at 1.2".
30156 Kit with chromemoly retainers . . $99.99
9.44
Available in standard sets and Crane’s ‘ThermoCool’ versions. This coating eliminates hot spots
in the coils which cause pressure fade and
rapid oil burn-off. Sets include upper and lower
collars and keepers. For all Big Twin models
from 1984 to present and Evolution® Sportster®
models from 1986 thru 2003.
‘Thermo-Cool’ Spring Kits
24186 With titanium retainers (175 lb. seat
pressure) . . . . . . . . . . . . . . . . . . . . . . $159.99
24187 With titanium retainers (155 lb. seat
pressure) . . . . . . . . . . . . . . . . . . . . . . $159.99
Standard Spring Kits
24176 With steel retainers (175 lb. seat pressure) . . . . . . . . . . . . . . . . . . . . . . . . . . . $70.99
24177 With titanium retainers (175 lb. seat
pressure) . . . . . . . . . . . . . . . . . . . . . . $129.99
24188 With titanium retainers (155 lb. seat
pressure) . . . . . . . . . . . . . . . . . . . . . . $129.99
24568 With steel retainers (155 lb. seat pressure) . . . . . . . . . . . . . . . . . . . . . . . . . . . $70.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Motor Factory® Valve Springs
for 1948 thru 1984 Big Twins
Top-quality, American-made replacement
valve spring sets fit Panhead and Shovelhead
models from 1948 thru 1984. Includes inner
and outer springs. Replaces OEM 18205-57A.
010571 Set of 4 . . . . . . . . . . . . . . . . . . . . . . . . $35.99
Please see cautionary information following page Ref.65
VALVE SPRING KITS . COMPONENTS
INDEX
APPAREL
SEATS
& BAGS
20963
JIMS® Valve Spring Kits
Includes JIMS spring seats, valve keepers, your
choice of titanium or chromemoly retainers,
and your choice of springs. Sold in complete
sets for one engine. Fit all Evolution® Big Twin
models from 1984 thru 1999.
20962 Chromemoly retainers (.600" lift, 160
lb. seat pressure) . . . . . . . . . . . . . . $109.99
20963 Titanium retainers (.600" lift, 160 lb.
seat pressure) . . . . . . . . . . . . . . . . . $165.99
20964 Chromemoly retainers (.675" lift, 184
lb. seat pressure) . . . . . . . . . . . . . . $124.99
20965 Titanium retainers (.675" lift, 184 lb.
seat pressure) . . . . . . . . . . . . . . . . . $249.99
Manley Performance Valve Spring
Kits for Late Twin Cam 88® Engines
Manley offers two proven valve springs kits
that are unequalled in the industry. For stock
to .600" lift applications they use single ovate
wire, conical design. And for stock to .650"
lift, they use true dual reverse wound chrome
silicon alloy design. These kits require no head
work or machining for installation, and fit
all Twin Cam 88® engines with triple keepers
from 2005 thru 2007.
699242 Conical springs with steel collars for
up to .600" lift . . . . . . . . . . . . . . $149.99
699243 Conical springs with titanium collars
for up to .600" lift. . . . . . . . . . . $209.99
699244 Double springs with titanium collars
for up to .650" lift. . . . . . . . . . . $179.99
Manley Viton® Seal Kit Kits
Viton seals have taken over the horsepower
market. With their smaller O.D., spring interference is unlikely. They meter the oil better,
allowing better lubrication but not too much.
The sealing rings will last longer then normal.
A far superior valve seal than most others.
699180 Fits Sportster® models from 1957
thru 1985 . . . . . . . . . . . . . . . . . . . . $10.99
699181 Fits Panhead and Shovelhead models from 1948-early 1980. . . . . . $10.99
699182 Fits Shovelhead models from late
1980 thru 1984 . . . . . . . . . . . . . . . $10.99
699183 Fits Evolution® Sportster® models
from 1986 thru 2007, and Big Twins
from 1984 thru 2004 . . . . . . . . . $10.99
699184 Fits Twin Cam 88® models from
2005 thru 2007 . . . . . . . . . . . . . . . $10.99
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
Valve Keepers
S&S Valve Spring Kit
for 1948-1984 Big Twins
This kit is designed to be used with stock style
guides, bottom spring collars, 3/8" valve stems
and keepers. Thin stemmed valves may also be
used if the keepers used are designed to compensate for the difference in stem diameters. By
grinding .060" to .090" off the tops of the valve
guides, cams with lifts up to .550" may be used.
Panheads usually require additional rocker cover
to top collar clearance. Kit includes 4 aluminum
top collars, 4 outer valve springs, 4 inner valve
springs, and installation instructions.
45711 Fits Panhead and Shovelhead engines
from 1948 thru 1984 . . . . . . . . . . . $99.99
A selection of top-quality keepers from some of
the biggest names in the performance business.
Manley Valve Keepers
Made of special chrome moly material. Each
keeper is hardened and black oxided for long
wear. Sets of 8.
Fits Sportster® and K-models 1952 thru 1985;
74" & 80" sidevalves 1930 thru 1948; 1932-up
45" sidevalves. May be used with Manley
Thin-Stem Valves.
99294 Replaces OEMs 172-30, 18228-30 $29.99
Fits all OHV Big Twins from 1936 thru 1984
(except Evolution® models)
99295 Replaces OEMs 172-36, 18228-36 $21.99
Fits all Evolution® Sportster® and Big Twin
models from 1984 to present
99296 Replaces OEM 18229-83 . . . . . . . . $29.99
Crane Valve Spring Shim Kit
for Evolution® Models
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
SHEETMETAL
Fits all Evolution Big Twin and Sportster
engines. The 12-piece kit includes 4 shims
each of .015", .030" and .060" thick sizes that
permit precise shimming from .015" to .105"
in .015" increments, enough to do one set of
heads. These shims should not be used with
Original Equipment springs.
24181 Valve spring shim kit . . . . . . . . . . . $15.99
®
TRANNY
& CLUTCH
®
GAUGES
CHEMICALS
Kibblewhite Valve Springs
for Panheads and Shovelheads
GENERAL
High-performance 160 lb. valve spring set for
Panhead and Shovelhead engines from 1948
thru 1984.
55197 Set of four . . . . . . . . . . . . . . . . . . . . . $54.99
WWW.CUSTOMCHROME.COM
9.45
CROSS
REFERENCE
VALVE GUIDE . SEALS
Valve Guide Materials Information
24440
24351
Crane Valve Guide Seals
Made from Teflon® for long-lasting valve seal
performance. Sold in sets of four.
24506 Fits Panhead and Shovelhead models
from 1948 thru 1984 (may require
machining of guides) . . . . . . . . . .$10.99
24507 Fits Evolution® and Twin Cam 88®
Big Twin models with
stock guides . . . . . . . . . . . . . . . . . .$10.99
24508 Fits Evolution® Big Twin models
with full-size aftermarket guides (may
require machining of guides) . . .$10.99
ENGINE
9
Kibblewhite Valve Seals
State-of-the-art design assures critical engine
sealing with minimal wear. Kibblewhite has
over 60 years experience supplying motorcycle
race engine parts. Sets of four.
For Evolution® Big Twin and
Twin Cam 88® Engines
Viton stem facing for low restriction and heat
resistance. Metal-reinforced .420" x .310" size.
55139 Fits Big Twins 1984 to present . . .$7.59
Custom Chrome® Cast Iron (sold each)
Easy-to-machine, low-cost with good
self-lubricating qualities . . . . . . . . . . . . . . . . . . . . . $7.39
Rowe Cast Iron (sold each)
Self-lubricating, easy-to-machine . . . . . . . . . . . . $11.99
Rowe Ampco 45 (sold each)
Nickel bronze, excellent self-lubricating qualities, minimal distortion during installation . . . . . . . . . . . $15.99
Custom Chrome®
Rowe
Rowe
Cast Iron
Cast Iron
Ampco 45
INTAKE
EXHAUST
INTAKE
EXHAUST
INTAKE
EXHAUST
For 74" & 80" Panheads and Shovelheads from 1948 thru 1980
STD.
12190
24440
24450
24351
24355
0.001
12128
24441
24451
24371
24372
0.002
12183
24442
24452
24352
24356
0.003
24443
24453
0.004
12192
24444
24454
24353
24357
0.006
24445
24455
24354
24358
0.008
24446
24456
24387
24388
For 80" Shovelheads from 1979 thru 1984
STD.
24400
24406
24359
24363
0.001
24401
24407
24373
24374
0.002
24402
24408
24360
24364
0.003
24427
24428
0.004
24403
24409
24361
24365
0.006
24404
24410
24362
24366
0.008
24405
24411
24375
24376
For Twin Cam 88® Models and Evolution® Big Twin & Sportster® Models
STD.
24430
24430
24377
24377
0.001
12122
12122
24431
24431
24378
24378
0.002
12123
12123
24432
24432
24379
24379
0.003
12124
12124
24433
24433
0.004
24434
24434
24380
24380
0.006
12125
12125
24435
24435
24381
24381
0.008
24436
24436
For Sportster® Models from 1957 thru 1983
STD.
12186
12194
24460
24465
24367
24369
0.001
12187
12195
24461
24466
24368
24370
Size
For Shovelhead Engines
Teflon seal with double coil spring for tension
on valve stem, and a steel band to secure the
seal to the guide.
55164 Fits Shovelhead Big Twins 1966
thru 1984 . . . . . . . . . . . . . . . . . . . . . .$7.59
41711
41516
41812
Motor Factory Valve Guide Seals
®
41816
Available in convenient single engine overhaul packs of four seals, or in economical shop supply quantities of 25. Each package includes an
installation tool and re-usable protective sleeve's) for quick and foolproof installation.
Note: Valve guide seals will require machining of valve guide and/or collar in order to re-establish correct overall valve guide height on all but the latest-style valve guides. Installation
tools are available separately. Refer to service manual and valve guide specifications for
modifications required.
Single engine overhaul packs (4 seals, installation tool and one
sleeve)
99193 Fits Sportster® models from 1957 thru 1985 . . . . . . . . . . . . . . . . . $9.99
99194 Fits Panhead and Shovelhead models from
1948-early 1980 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99
99195 Fits Shovelhead models from late 1980 thru 1984 . . . . . . . . . . $17.99
99196 Fits Evolution® Sportster® and Big Twin models from
1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99
Shop supply packs (25 seals, installation tool and two sleeves)
24345 Fits Sportster® model intake valves from 1957 thru 1985. . . . $39.99
24346 Fits Sportster® model exhaust valves from 1957 thru 1985 . . $39.99
24348 Fits Panhead and Shovelhead valves from 1948-early 1980 . $39.99
24347 Fits Shovelhead valves from late 1980 thru 1984 . . . . . . . . . . . $39.99
24349 Fits Evolution® Sportster® and Big Twin valves from 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99
9.46
Installation Tools
41711 Cutter with 11/32" pilot. For 1957 thru 1985 Sportster®
exhaust valve guides to permit the installation of CC #99193
and #24346 valve guide seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . $135.99
41516 5/16" pilot ONLY. For 1957 thru 1985 Sportster® intake valve
guides to permit the installation of CC #99193 and #24345
valve guide seals (when combined with CC #41711 cutter) $37.99
41812 Cutter with 3/8" pilot. For use on 1948-early 1980 Panhead
or Shovelhead valve guides to permit the installation of
CC #99194 and #24348 valve guide seals . . . . . . . . . . . . . . . . . $135.99
41816 Cutter with 3/8" pilot. For use on late 1980 thru 1984
Shovelhead valve guides to permit the installation of
CC #99195 and #24347 valve guide seals . . . . . . . . . . . . . . . . . $135.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
ROCKER SHAFT . COMPONENTS
INDEX
APPAREL
26083
20637
SEATS
& BAGS
26077
FOOT
CONTROLS
JIMS Rocker Arm Bushings
HAND
CONTROLS
®
Replacement bushings made from solid
bronze bar stock. Sets of 8.
20637 Fit all Big Twins from 1966 thru 1984
and all Sportster® models from 1957
thru 1985 (repl. OEM 17428-57) . $39.99
20958 Fit all Twin Cam 88® and Evolution®
Big Twin and Sportster® models from
1984 to present, and Buell® models
from 1986 thru 2002 (repl. OEM
17428-83) . . . . . . . . . . . . . . . . . . . . . . $39.99
Rocker Shaft O-Rings
Replacement rocker shaft O-rings fit
Shovelhead models from 1966 thru 1984 and
Sportster® models from 1957 thru 1985. Sold
in packs of 10.
090553 Replaces OEM 11101 . . . . . . . . . . $3.99
Note: CC #20958 is same as #20637 but without the mill slot.
Do not use CC #20958 on Shovelheads or Ironhead Sportster®
models.
LIGHTING
Panhead Rocker Oilers and Nuts
Exact reproductions of Original Equipment
intake rocker oilers and the self-locking rocker
arm stud nuts.
26077 Rocker arm oilers (repl. OEMs 1810049 and 18102-49) sold in pairs . . . $10.99
26083 Rocker arm stud nuts (repl. OEM 7727)
pack of 25 . . . . . . . . . . . . . . . . . . . . . $29.99
ELECTRICAL
EXHAUST
INTAKE
20638
JIMS® Rockershafts
20639
Precision-ground high-quality rocker shafts
replace Original Equipment parts perfectly. Precision shafts are Americanmade and centerless ground for accuracy. Stock diameter. Sold each.
20639 Fits Evolution® Sportster® and Big Twin engines, and Twin Cam 88®
engines from 1984 to present (repl. OEM 17611-83) . . . . . . . . . . . . . $19.99
20638 Fits Shovelhead Big Twin engines from 1966 thru 1984 (repl. OEM
17611-66B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $61.99
ENGINE
GASKETS
TRANNY
& CLUTCH
28026
DRIVELINE
Rockershaft for Evolution®
and Twin Cam 88® Models
26078
20083
Rockershafts
American-made, precision-ground and hardened steel shaft that duplicates the Original
Equipment part. Fit all Evolution® and
Twin Cam 88® motors from 1984 to present.
28027 Fits 1984 to present Big Twin and
Sportster® models (repl. OEM 1761183) (sold each) . . . . . . . . . . . . . . . . . . $9.59
28081 Replacement rocker arm bushing (repl.
OEM 17428-57) sold each . . . . . . . . $3.99
Replacement rockershafts for Big Twin and
Sportster® models. Sold each.
28026 Fits Sportster® models 1957 thru 1985
(repl. OEM 17435-57B) . . . . . . . . . . $15.99
26078 Fits Shovelhead Big Twins 1971 thru
1984 (repl. OEM 17611-66B) . . . . $29.99
20083 Rockerarm shims for Shovelheads 1966
thru 1984 (.007") pack of 10 . . . . . $4.79
Kibblewhite Bronze Alloy
Rocker Arm Bushings
CNC-machined from solid SAE-642 bronze
alloy. Set of 8.
55138 Fit all Big Twins from 1966 thru 1999
WHEELS,
TIRES
& BRAKES
010501
Rocker Arm Shim Kit
for Shovelhead Engines
FRAMES
Reduces top end noise with special pre-loaded
spring shims installed on the pushrod side
of the rocker shaft. Includes spring shims,
spacers, and rocker plug seals. The seals are
designed to conform to the rocker shaft and
cover hole for a positive seal. Seals are also
available separately. Fits Shovelhead models
1966-1984.
010519 Rocker arm shim and seal kit. . $19.99
010518 Special rocker arm seals
(pack of 4) . . . . . . . . . . . . . . . . . . . . $7.99
Motor Factory® Rocker Arm Shims
Fit all Shovelhead engines from 1966 thru
1984. Sold in packs of 10.
010501 .005"-thick . . . . . . . . . . . . . . . . . . . . $6.29
010537 .010"-thick . . . . . . . . . . . . . . . . . . . . $5.29
010515 .015"-thick . . . . . . . . . . . . . . . . . . . . $7.64
010538 .020"-thick . . . . . . . . . . . . . . . . . . . . $6.49
FORKS
& SHOCKS
SHEETMETAL
GAUGES
CHEMICALS
GENERAL
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31.99
Note: Must be installed and sized according to factory service
manual.
WWW.CUSTOMCHROME.COM
9.47
CROSS
REFERENCE
ROCKER ARMS
S&S Roller Rockers for Evolution® Engines
RevTech® Roller Rocker Arms for Evolution® Models
ENGINE
9
These rocker arms extend cylinder head service life giving you more
miles between teardowns, reduced friction and more power. The rolling action virtually eliminates side thrust when opening and closing
the valves, minimizing the wear on your engines valve stems, guides
and seals. Concealed pushrod seats are induction-hardened to 58-60
Rockwell C for scuff resistance and long-term durability. Computerdesigned bodies are extra-thick and made of 4140 investment cast
chromemoly steel that has been normalized to HRC35 for strength
and toughness. Concealed oilways between the pushrod seats and
the rollers provide reliable lubrication. Rollers are precision-machined
from ball race-quality steel before being hardened and ground with
a super-finished bore before being fitted to a heat-treated roller pin.
Shaft bushings are steel backed and bronze laminated for extreme wear
resistance. Set of 4.
659635 Fits all Evolution® Big Twin and Sportster® models from
1984 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
659649 Replacement bushings (pack of 8) . . . . . . . . . . . . . . . . . . . . . . . $42.99
Hardened aircraft steel and pressed in bushings give these rocker arms
the highest wear resistance and durability possible. For use in Evolution®
Big Twins from 1984 thru 1999 with cam lifts to .710" and Evolution®
Sportster® models from 1986 thru 2003 with cam lifts to .650". Designed
for use with adjustable pushrods to obtain correct valve lash adjustment. S&S recommends new rocker arm shafts for maximum performance and mileage.
45690 Set of four rocker arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $459.99
45691 Replacement set of four rocker shafts . . . . . . . . . . . . . . . . . . . . . $34.99
S&S Roller Rockers
for Shovelhead Engines
Rocker shafts used in the Shovelhead
rocker boxes are an economical
straight design similar to those
found in Evolution® engines. Fits S&S
rocker boxes only.
601712 Roller rocker arms
(set of four) . . . . . . . . $459.99
601794 Replacement rocker shafts
(set of four) . . . . . . . . . $84.99
TP Pro-Series® Forged Roller Rocker Arms
TP’s premium forged roller rockers are not only the strongest, but also
reduce operating friction so well they can give extra horsepower over
your stock rockers.
Features include:
• Forged from 4140 steel and CNC-machined for a perfect fit
• Feature a roller tip for less drag, and a solid bushing for extended life
• Fits all Evolution® Sportster® models from 1986 thru 2003, and
Evolution® and Twin Cam 88® Big Twin engines from 1984 thru 2005.
Also fits Buell® models from 1988 thru 2002
687311 Set of four . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $369.99
9.48
Delkron Billet Rocker Arm Support
A great performance enhancing product for Twin Cam 88® motors!
• Made of 6061-T651 aluminum
• Doubles the strength of the die-cast stock part
• Keeps rocker arm shaft location in stock position
• Replaces OEM 17594-99
600119 Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $344.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
ROCKER ARMS
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
26081
26082
JIMS® High-Performance Roller Rocker Arms
This design features 660 bronze rocker shaft bushings and bearinggrade steel roller tips. Set of four rocker arms ONLY.
20424 Stock (1.6:1 ratio) for all Evolution® Sportster® models from 1986
thru 2003, Evolution® and Twin Cam 88® Big Twin models from
1984 to present, and Buell® models from 1988 thru 2002 . . $499.99
20921 1.71:1 ratio for all Evolution® Sportster® models from 1986 thru
2003, Evolution® and Twin Cam 88® Big Twin models from 1984
to present, and Buell® models from 1988 thru 2002 (permits
engine builder to use a less radical cam with lower lift, yet
achieve high lift at the valve. Modifications to head and rocker
boxes may be required.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $549.99
Replacement Parts
20973 Rocker arm rollers (pack of 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99
20960 Rocker arm axles (pack of 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.99
20961 Rocker arm lock rings (pack of 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.99
HAND
CONTROLS
26074
26075
LIGHTING
Panhead Rocker Arms and Assemblies
Quality reproductions of the stock parts for 1948 thru 1965 Panheads.
Rocker Arms Only Sold each.
26074 Fits rear exhaust/front intake (repl. OEM 17360-48) . . . . . . . . $32.99
26075 Fits front exhaust/rear intake (repl. OEM 17375-48) . . . . . . . . $32.99
ELECTRICAL
Complete Assemblies Sold each.
26081 Fits rear exhaust/front intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $84.99
26082 Fits front exhaust/rear intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $84.99
EXHAUST
INTAKE
26079
ENGINE
28081
26080
GASKETS
TRANNY
& CLUTCH
Rocker Arms for Shovelheads
Rocker Arms for Sportster® Models
Fit Sportster® models from 1957 thru 1985. Sold each.
28029 Front exhaust (repl. OEM 17394-57A). . . . . . . . . . . . . . . . . . . . . . $44.99
28030 Rear exhaust (repl. OEM 17395-57A) . . . . . . . . . . . . . . . . . . . . . . $44.99
28031 Front intake (repl. OEM 17396-57A) . . . . . . . . . . . . . . . . . . . . . . . $44.99
28032 Rear intake (repl. OEM 17397-57A) . . . . . . . . . . . . . . . . . . . . . . . . $44.99
DRIVELINE
Fit generator and alternator models from 1966 thru 1984. Sold each.
26079 Fits rear exhaust/front intake (repl. OEM 17360-66) . . . . . . . . $29.99
26080 Fits front exhaust/rear intake (repl. OEM 17375-66) . . . . . . . . $29.99
28081 Replacement bushing for rocker arms
(repl. OEM 17428-57) sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.99
WHEELS,
TIRES
& BRAKES
FRAMES
Replacement Rocker Arm Bushing
28081 Replaces OEM 17428-57 sold each . . . . . . . . . . . . . . . . . . . . . . . . . . $3.99
26054
FORKS
& SHOCKS
SHEETMETAL
JIMS® Roller Rockers for
Shovelhead Models
Designed to reduce friction in the
valve train. This provides more horsepower and less heat in the top end. Fits
Shovelhead models from 1966 thru 1984
(1.43:1 stock ratio).
20922Sold in sets of four . . . . . . . . . . $549.99
Replacement Parts
20973Rocker arm rollers (pack of 4) $39.99
20960Rocker arm axles (pack of 4) . . $14.99
20961 Rocker arm lock rings (pack of 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.99
GAUGES
26055
Rocker Arms for Twin Cam 88®
and Evolution® Models
CHEMICALS
Replacement rocker arms for Evolution® Sportster® models from 1986
thru 2003, and Evolution® Big Twin and Twin Cam 88® models from 1984
to present. Sold each.
26054 Fits rear exhaust/front intake (repl. OEM 17360-83) . . . . . . . . $38.99
26055 Fits front exhaust /rear intake (repl. OEM 17375-83) . . . . . . . . $38.99
GENERAL
WWW.CUSTOMCHROME.COM
9.49
CROSS
REFERENCE
ROCKER COVER KITS
design by john reed
S&S Rocker Cover Kits
These two-piece rocker covers are designed with discriminating custom
and performance enthusiasts in mind.
For Evolution® Big Twin and Sportster® Models from 1984 thru 2003
Made to accommodate .710" lift when used with S&S Super Stock Street
or OEM heads, and .810" lift with S&S special application heads when
using S&S rocker arms. Permits in-frame installation, but taller motors
such as S&S 96" and 103" long blocks may require removal of engine.
46765 Die-cast, chrome-plated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $649.99
46771 Replacement gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $54.99
ENGINE
9
’Sculpted’ 2-Piece Rocker Box Kit
for Twin Cam 88® Models
Elevate your motor to an art form with this elegant design. The installation of these covers dramatically alters the appearance of your Twin
Cam 88® engine giving it a totally custom look. Includes chrome-plated
die-cast aluminum rocker box covers, chrome hardware, chrome bolt
caps and gaskets. Sold in pairs.
28310
Fits all Twin Cam 88® models from 1999 to present . . . . . . $399.99
28313
Replacement rubber gasket (pack of 10) . . . . . . . . . . . . . . . . $35.99
628314 Replacement metal gasket (pack of 10). . . . . . . . . . . . . . . . . . $57.99
Note: Not recommended for Buell® models. OEM style “umbrella valves” are included to insure
compatibility with crankcase and cylinder head venting.
For Twin Cam 88® Models from 1999 to Present
46764 Die-cast, chrome-plated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $649.99
46770 Replacement gasket kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99
Finned Dishpan Rocker Covers from
Custom Cycle Engineering
Twin Cam-Style Rocker Boxes
for Evolution® Motors
Chrome rocker boxes feature die-cast top and bottom pieces that are
polished and chromed. The chromed center rocker carrier is machined
from billet. All hardware is included.
Sold in sets.
43099 Fits all Evolution® Big Twin models from 1984 thru 1999 . . . $385.99
9.50
The original finned dishpan rocker covers were designed and manufactured by Randy Smith and Custom Cycle Engineering back in 1968, and
they’ve brought them back just for us old school fanatics! Designed to
eliminate oil seepage associated with the stock Panhead rocker box covers, these covers also dampen noise and a cooler running motor. These
unique custom rocker covers are made from the original tooling that
Randy designed, and even cast from A 356-T6 aluminum at the same
foundry. Sold in “as cast” finish. These covers match great with the
Finned primary covers also offered in this Handbook. Made in USA by
the gang at Custom Cycle Engineering.
632740 Finned Dishpan Rocker Cover set for Panheads . . . . . . . . . $299.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
ROCKER COVER KITS
US Design Patent #426,792
INDEX
APPAREL
Big Twin
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
Chrome Pan Covers
Custom ‘Smooth’ Rocker Boxes for Evolution® Models
Precision aluminum castings enhance the look of the Evolution® Big Twin motor. Our custom covers have elegant rounded contours rather than the boxy look of stock rocker boxes. Engineered
to exactly duplicate the function of stock pieces, including breather passages with umbrella valves
for late model bikes with crankcase breathers in the heads. They accept stock or aftermarket rocker arms and rocker shafts. Each kit includes front and rear rocker boxes, hardware, and gaskets.
Sold in sets exclusively from Custom Chrome®.
28555 Fits all Evolution® Big Twin models from
1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $285.99
Replacement Parts
54095 Rocker box gasket set for covers with casting marks
97 or 98. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31.99
93500 Chrome 12-point flanged rocker box bolts
(pack of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99
93501 Brass sealing washers for rocker box bolts
(pack of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99
Beautifully show-chromed, heavy-gauge steel
covers. Fit all Panheads from 1948 thru 1965.
12271 Set of two Pan covers (repl. OEM
17500-54) . . . . . . . . . . . . . . . . . . . . . . $59.99
12053 Thin paper rocker cover gasket (repl.
OEM 17541-48A) pack of 10 . . . . . $9.49
12054 Thick cork/rubber rocker cover gasket
(repl. OEM 17541-48B) pack of 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15.99
Stock
12067 Thick rocker cover gasket with a steel
core sandwiched between layers of a
cork/rubber composition (pack of 10)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $44.99
28555
Pan Cover Screw Kits
Chrome screw kits fit Panhead models 19481965. Sold in set of 24. Replaces OEM 3578W
500850 Chrome sockethead for use with steel
“D” ring . . . . . . . . . . . . . . . . . . . . . . . $15.99
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
Smooth Profile Rocker Cover Kit for Evolution® Big Twin Models
A subtly different shape and completely enclosed recess for the upper cover screws allows for a
continuous, sharp edge from front to rear resulting in an improved outer profile. Complete kit
includes top, middle and bottom rocker box covers and all required hardware and gaskets. Sold
each (two required per engine).
28530 Fit all Evolution® Big Twin models from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.99
FRAMES
FORKS
& SHOCKS
SHEETMETAL
Chrome Rocker Cover Kit
for Evolution® Sportster® Models
Chrome Rocker Arm Covers
for Shovelheads
Precision die-cast covers are machine polished,
triple chrome-plated and individually inspected
before shipment. Complete kit includes top, middle
and bottom rocker box covers and all required
hardware and gaskets. Sold each (two required
per engine).
28534 Fit Evolution® Sportster® models from 1986
thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
For all Shovelheads 1966 thru 1984. Ready-toinstall, and include two rocker arm cover stud
spacers for both the 1966 thru 1981 (short
stud) and 1982 thru 1984 (long stud) applications. They replace OEMs 17516-77B, 1751777B, 17518-80, 17519-80, 17550-80, 17552-80
28452 Sold in sets . . . . . . . . . . . . . . . . . . . . $414.99
GAUGES
CHEMICALS
Note: Due to the nature of sand cast aluminum parts, small
surface imperfections in the chrome are unavoidable.
GENERAL
WWW.CUSTOMCHROME.COM
9.51
CROSS
REFERENCE
ROCKER COVER KITS
Xzotic™ Rocker Boxes
for Evolution® and
Twin Cam 88® Models
U.S. Design Patent
#D347,810
02000
Add a touch of nostalgia. Transforms your
bike to look like a Pan or Knuckle. Compatible
with Original Equipment rocker components.
Complete kits include front and rear rocker box
assemblies, gaskets and hardware.
Chrome Pan-Style
02017 Fits Twin Cam 88® models from 1999 to
present . . . . . . . . . . . . . . . . . . . . . . . . . . .$789.99
02000 Fits Evolution® Big Twins from 1984 thru
1999 (except FXR models) . . . . . . . . . .$739.99
02022 Fits Evolution® FXR models from 1984 thru
2000, and Evolution® Sportster® models
from 1986 thru 2003. . . . . . . . . . . . . . .$739.99
02010 Pan cover gaskets (pack of 10) . . . . . .$49.99
02000
Chrome Knuckle-Style
02030 Fits Twin Cam 88® models from 1999 to
present . . . . . . . . . . . . . . . . . . . . . . . . . . .$799.99
02024 Fits Evolution® Big Twins from 1984 thru
1999, and Evolution® Sportster® models
from 1986 thru 2003. . . . . . . . . . . . . . .$799.99
02040 Replacement Knucklehead O-rings (pack
of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$20.99
Polished Knuckle-Style
602101 Fits Twin Cam 88® models from
1999 to present . . . . . . . . . . . . . . . . .$859.99
02024
U.S. Design Patent
#D368,682
02024
ENGINE
9
Ribbed Panhead Covers
S&S Roller Rockers
and Rocker Covers for
Shovelhead Engines
Just the fact that the S&S polished
billet rocker covers for Shovelheads
look so good may be reason enough
to put them on your bike, but the
beauty is not just skin deep. The well
thought out design offers a number
of advantages over conventional cast
rocker boxes. Machined from billets of
356 aluminum on modern CNC equipment, these rocker boxes provide
the ultimate in dimensional accuracy
and stability. The top and bottom
sections of the covers are sealed with
an O-ring type seal that insures leak
free operation. Rocker shafts used in
the Shovelhead rocker boxes are an
economical straight design similar to
those found in Evolution® engines.
601713 Front and rear rocker boxes
with shafts . . . . . . . . . . . . $759.99
601712 Roller rocker arms (set of four)
. . . . . . . . . . . . . . . . . . . . . . . $459.99
601794 Replacement rocker shafts
(set of four) . . . . . . . . . . . . .$84.99
9.52
Heavy-gauge steel covers with out of
sight lookin’ ribs!. Beautifully showchromed and fit all Panheads from
1948 thru 1965. Use with our #12270
“D” rings. Sold in pairs. Made in USA
by Paughco.
632256 Ribbed Panhead covers $64.99
Multiple Skull Rocker Box Covers
Ominous 3-dimensional skulls design. Made from polished
aluminum, each piece is sand-cast from a hand-carved
original. Sold in pairs.
37725 Fits Evolution® Big Twins from 1984 thru 1999
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.99
33150 Fit Twin Cam 88® models from 1999 to present
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.99
Split Shovelhead
Rocker Box Kit
from Stevenson
Cycle
The Shovelhead is one
of the coolest looking
motors ever produced,
and splitting the rocker
boxes makes it look just that much cooler! Now,
all you Shovel owners who were thinking about
splitting your rocker boxes, can actually do it…
yourself! Before this kit, the rockers would need to
be removed, welded, machined to exacting specifications, then all the outside oiler parts fabbed;
time consuming, expensive, and requiring a great
deal of expertise. These split rocker boxes fit all
Shovelhead motors manufactured from 1966 to 1984 as well as all aftermarket motors using the same
type of rocker box. The kit includes brand new rocker boxes in raw metal form with the machined areas
cut as shown, ready for you to finish and send out to chrome, polish, powder coat, or just left in the
rough form. Includes exterior copper oil line kit and machined rocker shaft nuts. Developed in partnership with our buddy Steve Broyles Sr. of Stevenson’s Cycle… thanks Steve, these are Bitchin!
632910 Split Shovelhead Rocker Box Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $659.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
ROCKER COVER COMPONENTS
INDEX
APPAREL
36190
SEATS
& BAGS
36151
FOOT
CONTROLS
Colony Rocker Box Acorn Nut
Kits for Shovelheads
Fits all models from 1966 thru 1984.
36151 Complete kit . . . . . . . . . . . . . . . . . . . $37.99
Rocker Box Mounting Kit
Fits all models from 1966 thru 1984.
36190 Complete kit . . . . . . . . . . . . . . . . . . . $12.99
HAND
CONTROLS
Complete Rocker Box
Hardware Kit
Full 32 piece rocker box mounting kit contains
everything needed to install two rocker boxes.
Fits all Evolution® Big Twin and Sportster®
lower rocker boxes.
94053 Rocker box hardware kit. . . . . . . . $17.99
Chrome Panhead ‘D’ Rings
Thick aluminum ‘D’ rings with a show-chrome
finish for all Original Equipment pan covers
as well as any of the aftermarket offerings.
Helps prevent oil leaks around the pan
gasket. Comes complete with chrome
sockethead capscrews.
12270 ‘D’ rings and screws . . . . . . . . . . . . $71.99
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
Colony Rocker Box Cap Nut Set
Colony Knucklehead Look-Alike
Rocker Plug Sets
Custom cap nut set for the rocker boxes on all
Shovelhead motors 1966 thru 1984.
36111 Complete set . . . . . . . . . . . . . . . . . . . $35.99
Chrome
Rocker Arm
Shaft
Plug Sets
Fits the rockershafts on
Sportster® models
from 1971 thru
1985 and Big
Twins from 1971
thru 1984.
36188 Set of 4 . . . . . . . . . . . . . . . . . . . . . . . . $27.99
S&S
Crankcase
Breather
Valves
for Twin Cam
88® Models
By installing pressure sensors in
the crankcase, cam chest and rocker covers
S&S determined the source and solution for
the problem of “oil carry-over”, or in other
words, oil out the breather. The result is an
ingenious valve that is installed over the pinion shaft and inside the pinion bearing boss.
It’s contained between the pinion bearing
outer retaining ring and the oil pump. Also
increases midrange horsepower and torque
very slightly.
601115 Fits all Twin Cam 88® models (except
Softail® models) from 1999 thru
2002 . . . . . . . . . . . . . . . . . . . . . . . . . $99.95
601116 Fits all Twin Cam 88® models (except
Softail® models) from 2003 thru
2006 . . . . . . . . . . . . . . . . . . . . . . . . . $99.95
Rocker Box Stud Kit
for Shovelhead Engines
Sold in sets of four.
36065 Fits Sportster® models 1971 thru 1985;
Shovelheads 1971 thru 1984 . . . . $25.99
36064 Fits Sportster® models 1957 thru 1970;
Shovelheads 1966 thru 1970 . . . . $25.99
ENGINE
GASKETS
TRANNY
& CLUTCH
This high-quality American-made kit contains
8 long studs, 2 short studs and 1 motor mount
stud. The extra short stud provided replaces
one of the long studs on late-model
Shovelheads.
28455 Replaces OEMs 17506-66, 17508-66
and 16864-48 . . . . . . . . . . . . . . . . . . $42.99
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
S&S Crankcase
Breather Reed
Valves for 1993'99 Engines
The S&S breather reed
valve for 1993-'99 big
twins replaces the standard rotary breather
valve. Installation is fast
and simple. Remove the originalbreather gear
and insert the new S&S reed valve assembly
into the breather valve cavity. No aligning
timing marks, and no rotating parts. The S&S
crankcase breather reed valve can be used to
replace the stock style rotary breather valve in
engines with minor breather cavity damage,
and there is a +.030” oversized reed valve for
engines with heavily damaged breather bores.
Standard Diameter
614581 +.030” Oversize –
(For damaged engines.) . . . . . . .$89.95
614582 +.030” Oversize –
(For damaged engines.) . . . . . . .$99.95
WWW.CUSTOMCHROME.COM
Colony Chrome Rockershaft
Cap Nut Kit
Replace the ‘Red-Dot’ nuts on the left-side
of the rockershafts of all 1966 thru 1984
Shovelheads and 1957 thru 1985 Sportster®
models.
36119 Set of 4 . . . . . . . . . . . . . . . . . . . . . . . . . $9.59
Rocker Shaft
End Plug
and Nut Kits
FORKS
& SHOCKS
SHEETMETAL
GAUGES
Original style rocker
shaft end plug and
nut kit for two heads.
Available with chrome
or cadmium finish. Fits
Sportster® models 19711985 and Big Twin models 1971-1984.
500450 Chrome . $31.99
CHEMICALS
GENERAL
9.53
CROSS
REFERENCE
ROCKER OIL LINES . BREATHER VALVES
12427
12428
Overhead Rocker Arm Oil Lines
Sets of two braided oil lines
12427 Fits 1966 thru 1984 Shovelheads $21.99
12428 Fits 1957 thru 1985 Sportster®
models. . . . . . . . . . . . . . . . . . . . . . . . . $28.99
U.S. Patent #4,869,213
28015
ENGINE
9
RevTech® Adjustable Breather Valves
28016
Permit the engine builder to alter breather timing to match the displacement of the motor.
Increasing the stroke or cylinder bore changes the total volume of the crankcase. If the breather is
not modified, the cylinders fight the pressure build-up in the lower end that a stock breather cannot relieve. RevTech® offers an all-steel breather valve for Big Twins from late 1977 thru 1999. It’s
designed to replace the stock steel or plastic breather valve and with its removable gear, permits
you to dial in the exact timing needed to ensure proper scavenging. Includes a selection of four
different-sized thrust washers. Fit engines from late 1977 thru 1999 (except Twin Cam 88® models).
58076 Stock duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.99
58077 +10° duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.99
58079 +10° duration, +.030" oversize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.99
Chrome Rocker Oil Lines
Chromed rocker box oil lines for Sportster®
models and Shovelheads. Includes complete
set of fittings and seals (2 lines).
28015 Fits Shovelheads 1966 thru 1984 (repl.
OEMs 62783-66A, 62785-66A) . . . $22.99
28016 Fits Sportster® models (except magneto models) from 1957 thru 1985 (repl.
OEM 17324-57A) . . . . . . . . . . . . . . . $22.99
Rocker Box Oil Line Fittings
Includes chrome fittings and seals for the
rocker box oil lines on all Sportster® models
and Shovelheads 1957 thru 1985.
010421 Sold in pairs (repl. OEMs
63527-57A, 63526-57) . . . . . . . . . . . $5.99
12074 Motor Factory® oil line sleeves ONLY
(repl. OEM 63529-57) pack of 10 . $2.59
9.54
S&S Breather Valves
These steel breathers for Big Twins are
designed to replace and outperform their
Original Equipment counterparts.
Special Design Features:
• Steel vs. plastic means greater durability and strength. Particles are less likely
to get imbedded in the gear which can
damage the crankcase breather gear
cavity.
• A screen vs. slots means better protection. Particles are stopped from getting to the gear cavity where they may
damage the gears or pump.
• S&S steel gear with welded in screen
with larger diameter holes vs. stock
steel gear with screen with smaller
holes held in with a clip means
improved air flow/oil scavenging from
the flywheel side.
• Crankcase flywheel cavity vacuum and
oil scavenging in late 1977 thru 1999
engines further improved with synchronizing refinements.
45845 Breather valve with shims for Big Twin models from 1977 thru 1999
(repl. OEMs 25313-77A, 25313-77B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.99
45716 Breather valve ONLY for Big Twin models from 1977 thru 1999
(repl. OEMs 25313-77A, 25313-77B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99
45717 Breather valve ONLY for Big Twin models from 1954 thru 1977
(repl. OEM 25313-73) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
BREATHER VALVES . REVTECH CAMS
INDEX
APPAREL
SEATS
& BAGS
JIMS® Breather Valves
Aerospace-quality steel breather valves with very precise
breather timing. An excellent upgrade for stock plastic breather valves. Oversized versions allow repair of worn case without
welding and machining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.99
20936 Fits all Big Twins (except Twin Cam 88® models) from
late 1977 thru 1999 (repl. OEM 25313-77)
20935 +.030 oversize for Big Twin models (except Twin Cam
88® models) from late 1977 thru 1999
20937 Fits Big Twin models from 1948-early 1977 (repl. OEM
25313-73)
20938 +.030 oversize for Big Twin models from 1948
to early 1977
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Note: For oversized breather valves, use JIMS reamer CC #20945 to size worn
breather hole in case
ELECTRICAL
EXHAUST
Breather Valves
for Big Twins
INTAKE
These are Original Equipment plastic breather valves
for Big Twin models.
75201 Late 1977 thru 1999 (repl. OEM 25310-82A)
ENGINE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.99
Breather Valve Washers
Original Equipment washers for all Evolution® Big Twin
models from 1970 thru 1999. Packs of 5. . . . . . . . . .$14.99
75202 0.130"-thick
75205 0.145"-thick
(repl. OEM 25320-82)
(repl. OEM 25323-82)
75203 0.135"-thick
75206 0.150"-thick
(repl. OEM 25321-82)
(repl. OEM 25325-82)
75204 0.140"-thick
75207 0.155"-thick
(repl. OEM 25322-82)
(repl. OEM 25326-82)
75208 0.160"-thick
(repl. OEM 25327-82)
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
S&S Crankcase Breather Reed Valves
for 1993-'99 Engines
S&S Crankcase
Breather Valves
for Twin Cam 88®
Models
By installing pressure sensors in
the crankcase, cam chest and
rocker covers S&S determined
the source and solution for the
problem of “oil carry-over”,
or in other words, oil out the
breather. The result is an ingenious valve that is installed
over the pinion shaft and inside the pinion bearing boss. It’s contained
between the pinion bearing outer retaining ring and the oil pump. Also
increases midrange horsepower and torque very slightly.
601115 Fits all Twin Cam 88® models (except Softail® models) from
1999 thru 2002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95
601116 Fits all Twin Cam 88® models (except Softail® models) from
2003 thru 2006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.95
The S&S breather reed valve for 1993-'99 big
twins replaces the standard rotary breather
valve. Installation is fast and simple.
Remove the originalbreather gear and
insert the new S&S reed valve assembly into the breather valve cavity. No
aligning timing marks, and no rotating parts. The S&S crankcase breather reed valve can be used to replace
the stock style rotary breather valve
in engines with minor breather cavity
damage, and there is a +.030” oversized
reed valve for engines with heavily damaged breather bores.
Standard Diameter
614581 +.030” Oversize – (For damaged engines.) . . . . . . . . . . . . . . . $89.95
614582 +.030” Oversize – (For damaged engines.) . . . . . . . . . . . . . . . $99.95
WWW.CUSTOMCHROME.COM
9.55
FORKS
& SHOCKS
SHEETMETAL
GAUGES
CHEMICALS
GENERAL
CROSS
REFERENCE
S . S CAM KITS FOR TWIN CAM
S&S Gear Drive Cam Kits
for Twin Cam 88® Engines
ENGINE
9
Increases valve timing accuracy by eliminating
46756
timing chain lash and the loosely fit stock cam
drive sprockets. This is accomplished by replacing
the stock components with light press fit S&S gear
drive cams. Because the chain, chain guides and
tensioner are eliminated, there is no longer a possibility for these parts to fail and damage other
parts. These kits reverse the rear cam’s direction
of rotation and provide additional operating
clearance between cam lobes, permitting the use
of higher lift cams. When updating from the stock chain drive system, it is easiest to order one of
these complete kits which include camshafts with inner gears, an outer cam drive gear kit, an S&S
cam bearing plate, and the camshaft installation kit. S&S gear drive camshafts must be used with
S&S gear drive components. Six cam profiles are available to cover a wide variety of engine displacements and compression ratios. With the exception
of the “bolt in” 510G cam set (CC #601770), S&S gear drive cams are high lift and were designed to take advantage of the extra flow of ported stock
heads or S&S Super Stock™ cylinder heads. Due to the high lift of these cams, adjustable pushrods and high-performance valve springs are required for
installation. If replacing cams in an engine already equipped with S&S gear drive cams, order the ‘Gear Drive Cams with Inner Gears ONLY’ and reuse
the existing gears. A CC #46752 camshaft installation kit is recommended. If installing a gear drive cam set without inner gears from another cam
manufacturer, a CC #46760 cam gear drive kit provides the inner cam gears as well as an outer cam drive gear kit. A CC #46752 camshaft installation
kit and a CC #601119 S&S cam bearing plate are also recommended. Fit all Twin Cam 88® engines from 1999 to present.
Complete Gear Drive Cam Kits for 2006 Dyna Glides and all 2007 Big Twins
601814 510G cam kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $789.99
601815 570G cam kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $789.99
601816 585G cam kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $789.99
601817 625G cam kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $789.99
601818 640G cam kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $789.99
Complete Gear Drive Cam Kits for 1999 thru 2006 Big Twins
Accessories
(except 2006 Dyna™)
46752
S&S camshaft installation kit. Provides parts needed
to install S&S gear drive cam sets. Includes bearings,
601770 510G cam kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$739.99
bushings, circlip and gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99
601771 570G cam kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$739.99
46760
Cam
drive gear kit (includes front and rear inner cam
601772 585G cam kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$739.99
gears, pinion gear, and outer cam gear). . . . . . . . . . . . . . . . . . .$449.99
601773 625G cam kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$759.99
601119 S&S heavy-duty cam bearing plate for use with all
601774 640G cam kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$759.99
gear drive cams in Big Twin engines (except 2006
Gear Drive Cams with Inner Gears ONLY for 1999 thru 2006 Big
Twins (except 2006 Dyna Glides)
012029 510G cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$459.99
46756
570G cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$459.99
46757
585G cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$459.99
46758
625G cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$479.99
46759
640G cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$479.99
46753
Dyna Glide® models) from 1999 thru 2006 . . . . . . . . . . . . . . . . . $6.99
Outer cam drive gear kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$244.99
Note 1: A hydraulic press and other professional tools are required to install cams in Twin Cam
88® engines. Additionally, material must be removed from the inner surface of the stock gear
cover to install the S&S Gear Drive. Original Equipment crankcases will require clearancing
for the 625G/640G/675G cams. The valve spring pockets will also need to be machined when
installing the 675G cam set. S&S recommends that gear drive cams be installed by a professional
mechanic.
Note 2: Due to the inherent characteristics of gear drives, you may experience more valve train
noise with gear driven cams. Oversized and undersized gears are available to help achieve correct gear lash.
Note 3: Experience shows that with 160 lb. of valve seat force, the S&S gear drive cams will perform well up to 6200 rpm.
If higher rpm is anticipated, valve springs that provide higher seat force should be used.
Cam Specifications
Grind
Open
510G/510GP
Intake
20°
Exhaust
52°
570G/570GP
Intake
20°
Exhaust
55°
585G/585GP
Intake
20°
Exhaust
60°
625G/625GP
Intake
20°
Exhaust
60°
640G/640GP
Intake
25°
Exhaust
65°
9.56
Close
Duration
@ .053
Valve
Lift
38°
20°
238°
252°
.510
.510
40°
20°
240°
255°
.570
.570
45°
20°
245°
260°
.585
.585
55°
20°
255°
260°
.625
.625
60°
25°
265°
270°
.640
.640
Cam Applications
• 510 cam kits are designed as bolt-in cams for
88" to 95" engines with compression ratios
below 9.7:1. Intended primarily for stock heads
that have not been ported
• 570 cam kits are designed for 88" to 95"
engines with compression ratios between 9:1
and 10:1
• 585 cam kits are designed for 88" to 95"
engines with compression ratios from 10 to
10.5:1 and 100" and 107" engines at 9.7:1 to
10.5:1 compression
• 625 cam kits are designed for engines of 95" or
more with compression ratios between 10.0:1
and 10.75:1
• 640 cam kits are designed for engines of 95" or
more with compression ratios between 10.5:1
and 11.5:1
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
ANDREWS CAM KITS FOR TWIN CAM
Andrews Cams for 2006 Dyna Glide
and 2007 Big Twin Models
INDEX
APPAREL
Andrews is on top of their game designing roller chain and cams with
S&S gear driven gears for 2006 Dyna Glide and 2007 Big Twin models.
These cams were designed around the specs for the earlier Andrews
cams for Twin Cam 88® engines. This will help users choose their favorite
combinations. The gear drive kits include two plates for blocking the
chain oil feed holes which are not needed for gear drives.
Andrews 21H / 21HG
A bolt-in cam with more torque for all around riding with heavy bikes,
stock compression ratios and stock pistons. Similar to the EV23 cam for
80" Evolution® engines. Makes power from 1700-4800 RPM.
602020 Chain drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99
602028 Gear drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99
Andrews 26H / 26HG
A bolt-in cam for engines from 88 to 95 inches and stock compression
ratio. Great for two up touring, this cam will add torque and HP at
lower and middle RPM ranges. Makes power from 1800-5200 RPM.
602021 Chain drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99
602029 Gear drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99
Andrews 31H / 31HG
Great cam for motors with 95 inches and 9.8:1 to 10.2:1 compression
ratios. Lower TDC lift for easy installation. Similar to TW37 with different timing. Makes power from 2000-5600 RPM.
602022 Chain drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99
602030 Gear drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99
Andrews 37H / 37HG
Hot street cams for 88 or 95 inches. 80+ rear wheel horsepower is possible with a well tuned 88 incher, more with 95. Smooth idle with broad
torque, and makes power from 2200-5600 RPM. 9.0:1 to 9.5:1 compression ratio.
602023 Chain drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99
602031 Gear drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99
Andrews 44H / 44HG
For engines with 88 or 95 inches and compression ratios from 9.5:1 to
10.2:1. Maximum torque range is from 2300-5800 RPM.
602024 Chain drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99
602032 Gear drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99
Andrews 50H / 50HG
Designed for easy installation in 95 inch motors with stock heads and
9.5:1 to 9.8:1 compression ratios. Makes power from 2400-6000 RPM.
602025 Chain drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99
602033 Gear drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99
Andrews 55H / 55HG
Great cam for 95 inch engines with 9.8:1 to 10.2:1 compression ratios.
Maximum HP and torque at mid and upper RPMs. Makes power from
2600-6200.
602026 Chain drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99
602034 Gear drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
GRIND
21H / 21HG
Intake
Exhaust
26H / 26HG
Intake
Exhaust
31H / 31HG
Intake
Exhaust
37H / 37HG
Intake
Exhaust
44H / 44HG
Intake
Exhaust
50H / 50HG
Intake
Exhaust
55H / 55HG
Intake
Exhaust
60H / 60HG
Intake
Exhaust
67HG
Intake
Exhaust
59HG
Intake
Exhaust
64HG
Intake
Exhaust
OPEN
CLOSE
DURATION
@ .053
VALVE
LIFT
[email protected]
TDC
VALVE
SPRINGS
10°
40°
30°
08°
220°
228°
.498
.498
.134
.121
Stock
Stock
11°
41°
35°
09°
226°
230°
.490
.490
.138
.120
Stock
Stock
10°
52°
46°
08°
236°
240°
.510
.510
.131
.120
Stock
Stock
18°
46°
38°
14°
236°
240°
.510
.510
.174
.148
Stock
Stock
21°
49°
41°
17°
242°
246°
.495
.495
.182
.158
Stock
Stock
20°
54°
48°
18°
248°
252°
.510
.510
.184
.168
Stock
Stock
22°
52°
46°
20°
248°
252°
.550
.550
.197
.181
HI-LIFT
HI-LIFT
24°
58°
56°
22°
260°
260°
.560
.560
.205
.192
HI-LIFT
HI-LIFT
24°
58°
56°
22°
260°
260°
.560
.560
.205
.192
HI-LIFT
HI-LIFT
24°
58°
56°
22°
260°
260°
.560
.560
.205
.192
HI-LIFT
HI-LIFT
24°
58°
56°
22°
260°
260°
.560
.560
.205
.192
HI-LIFT
HI-LIFT
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
Andrews 60H / 60HG
For well prepped 95-103 inchers with 10:1 to 10.5:1 compression ratios,
100+ HP is within reach. Makes power from 2700-6500+ RPM.
602027 Chain drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99
602035 Gear drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99
FORKS
& SHOCKS
Andrews 67HG
Performance cams for 95-107+ inches, and 10:1 to 10.8:1 compression
ratios with high-flow head set-up. Makes power from 2600-6400+ RPM.
602036 Gear drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99
SHEETMETAL
Andrews 59HG
Great cams for 95-107+ inchers with 12:2:1 or higher compression ratio.
Max torque and horsepower from 2700-6500+ RPM.
602037 Gear drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $469.99
GAUGES
Andrews 64HG
Big cams for modified 95-116+ inch motors running 10.2:1 or higher
compression ratio. Heads must be set for .700" lift and modified for
maximum air flow. Makes power from 3000-6500+ RPM.
602038 Gear drive cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $469.99
CHEMICALS
GENERAL
WWW.CUSTOMCHROME.COM
9.57
CROSS
REFERENCE
CRANE . ANDREWS CAM KITS FOR TWIN CAM
Andrews Cams for Twin Cam 88® Models
Andrews Products has added four new cam grinds which show that more
power is within easy reach. The Twin Cam 88® engine with larger cylinder
bores and a shorter stroke has a very broad torque curve compared to earlier engines. All performance cams listed below are intended for use with
Original Equipment hydraulic lifters. Cam kits include one roller bearing
and one ball bearing. For model from 1999-2006 except for Dyna®.
Crane ‘Hi-Roller’ Cams
for Twin Cam 88® Models
ENGINE
9
Tap the potential of your engine by improving it’s breathing. Profiles
available for mild street cruising to race engine builds. All cams are
made for splined cam sprockets. Fit all Twin Cam 88® models from
1999 to 2006 except 2006 Dyna.
Hi-Roller ‘HTC296-2’
24605 For modified engines with 10.25:1 and higher compression, big
bore kits, head mods, etc. Must use high-performance valve
springs clearance for .600" lift, performance air cleaner and freeflow exhaust system. Ideal for use with Edelbrock® Performer
RPM heads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $329.99
Hi-Roller ‘HTC300-2’
24600 Bolt in cam for low-end torque and midrange. Excellent choice
for touring models. Recommended for use in motors with stock
compression and valve springs . . . . . . . . . . . . . . . . . . . . . . . . . . . $329.99
Hi-Roller ‘HTC310-2’
24601 Bolt-in cam with useful increase in torque and horsepower over
a broad rpm range. For stock compression ratio or up to 9.5:1.
Uses stock valve springs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $329.99
Note: Chain Drive: All Andrews cams for Twin Cam 88® models require the additional purchase
of Andrews sprockets. Gear Drive: All Andrews cams for Twin Cam 88® models require the
additional purchase of (#46760)cam gear kit and (#46752) installation kit.
Chain
24587
$285.99
24588
$285.99
24582
$285.99
24589
$285.99
n/a
Hi-Roller ‘HTC316-2’
24602 Bolt-in street performance. Works with compression ratios from
stock to 10.1:1. Uses stock valve springs. . . . . . . . . . . . . . . . . . . $329.99
$285.99
Hi-Roller ‘HTC290-2’
24603 Great low and mid-range torque with upper RPM power. Good
with stock or big bore pistons with 9.5:1 or higher compression
ratio. Must use .570" lift high-performance valve springs. . $329.99
$285.99
Hi-Roller ‘HTC304-2’
24604 Big power for big engines. Excellent for big bore kits, 10.5:1 and
up compression and modified heads. Must use .600" lift highperformance valve springs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $329.99
Grind
Open
Hi-Roller
Intake
Exhaust
Hi-Roller
Intake
Exhaust
Hi-Roller
Intake
Exhaust
Hi-Roller
Intake
Exhaust
Hi-Roller
Intake
Exhaust
Hi-Roller
Intake
Exhaust
‘HTC296-2’
20°
52°
‘HTC300-2’
13°
42°
‘HTC310-2’
20°
47°
‘HTC316-2’
19°
48°
‘HTC290-2’
18°
46°
‘HTC304-2’
25°
56°
Close
Duration
@ .053
Valve
Lift
46°
22°
246°
254°
.619
.619
33°
14°
226°
236°
.505
.505
36°
15°
236°
242°
.505
.505
43°
24°
242°
252°
.505
.505
42°
22°
240°
248°
.570
.570
49°
24°
254°
260°
.600
.600
Note: 1999 models require use of cam drive sprocket kit
OEM 25446-99, cam drive sprocket bolt OEM 996, and washer OEM 6294.
24583
24590
24584
$285.99
GRIND
TW21
Intake
Exhaust
TW26A
Intake
Exhaust
TW37B
Intake
Exhaust
TW44
Intake
Exhaust
54G
Intake
Exhaust
TW50
Intake
Exhaust
TW55
Intake
Exhaust
TW60A
Intake
Exhaust
Gear
614630 ‘TW21’ bolt-in kit with more torque for all around
$273.36 riding and heavy bikes. Designed to run with stock
compression ratio (1700-5200 RPM)
614631 ‘TW26A’ bolt-in cam for low RPM torque when riding
$273.36 two up. This touring cam will add more torque and
horsepower in the lower and middle RPM range
(1800-5500 RPM)
614633 ‘TW37B’ bolt-in cam that delivers a smooth idle, and
$273.36 broad torque band. Runs best with low-restriction
exhausts. '54G' New for 2008 Specially designed for
96 and 103 engines with CR up to 10:1 (2200-5600
RPM range)
n/a
‘TW44’ designed for 88-inch engines with 9.5:1 compression ratio or higher. Maximum torque and horsepower at middle and upper range (2400-6000+ RPM)
614634 '54G' New for 2008 Specially designed for 96 and 103
$273.36 engines with CR up to 10:1 (2200-5600 RPM range)
614635 ‘TW50’ cam for maximum torque and horsepower at
$273.36 higher RPM ranges. Designed for lighter bikes and
engines with 9.5:1 compression ratio (or higher) and
88" to 95" engines
614636 ‘TW55’ high lift cams for maximum torque and
$273.36 horsepower. For 88" to 95" engines with 9.5:1 compression ratio or higher (2600-6000+ RPM)
614637 ‘TW60A’ cam for a well-prepped engine with 95"
$273.36 cylinders and head work and modified exhaust
(high lift)
OPEN
CLOSE
DURATION
@ .053
VALVE
LIFT
[email protected]
TDC
VALVE
SPRINGS
10°
40°
30°
08°
220°
228°
.498
.498
.134
.121
Stock
Stock
11°
41°
35°
09°
226°
230°
.490
.490
.129
.112
Stock
Stock
14°
48°
42°
12°
236°
240°
.510
.510
.151
.140
Stock
Stock
21°
49°
41°
17°
242°
246°
.495
.495
.182
.158
Stock
Stock
16°
52°
42°
08°
238°
238°
.555
.555
.165
.158
Stock
Stock
20°
54°
48°
18°
248°
252°
.510
.510
.184
.168
Stock
Stock
22°
52°
46°
20°
248°
252°
.550
.550
.197
.181
HI-LIFT
HI-LIFT
24°
58°
56°
22°
260°
260°
.560
.560
.205
.205
HI-LIFT
HI-LIFT
Note: TW21, TW26A and TW37B cams work well with fuel injection or carburetors.
9.58
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
S . S EVO CAMS . CAM ACCESSORIES
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Andrews Front and Rear
Cam Sprocket Kits
for Twin Cam 88® Models
Crane Tune-A-Cam Kit
Now it’s quick-and-easy to degree your camshaft for maximum performance with this unique kit. Includes a large, easy-to-read degree wheel,
dial indicator, TDC locator, and lightweight checking springs packed in
a high-impact plastic case. You can also check camshaft and crankshaft
end play, shaft and gear runout.
20132 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $329.99
22298 Degree wheel ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $46.99
All Andrews cam kits for early Twin Cam 88® models require a new
heat-treated 34-tooth rear cam drive sprocket and 17-tooth front cam
sprocket. The new sprocket replaces OEM sprockets. As of winter ‘99,
no Andrews Twin Cam 88® cam sets will be sold without one new drive
sprocket. Sprockets are made from heat-treated alloy steel and are longer-than-stock for greater stability. A full-length 3/16" drive key and 3
spacer shims are included. With the shims, the installed length of new
sprocket can be set to the same length as the original stock sprocket
plus spacer. 34-tooth and drive sprocket will fit all stock Twin Cam 88®
model rear cam shafts. If you are into any performance riding, a new
sprocket is a must installation, even with engines using stock camshafts.
24580 Keyed. Includes 34-tooth gear, 3/16" drive key and 3 shims for
the rear cam on 1999 Twin Cam 88® models . . . . . . . . . . . . . . . $82.99
24596 Splined. Includes 34-tooth gear, grade 8 bolt, hardened washer
and 3 shims for rear cam on all Twin Cam 88® models from 2000
to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $82.99
24586 17 tooth front cam sprocket (repl. OEM 25609-99) . . . . . . . . . $52.99
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
S&S Cams
for Evolution®
Big Twin Models
S&S camshafts go through extensive
dyno testing and real world on the track
experience. All S&S cams are proven to
deliver performance gains in the areas
indicated.Fit all Evolution® Big Twin
models from 1984 thru 1999.
S&S 600
For 313/16" and larger bore engines with
up to 10.25:1 compression. Great power
curve through mid range and top end.
Great all-around performer suited for
large displacement motors.
45611 600 cam . . . . . . . . . . . . . . . . .$189.99
S&S 520
For all engines up to 10:1 compression.
Works well with stock or ported heads.
Short duration and reduced overlap
make large amounts of low end torque
perfect for Touring models or two-up
riding.
45617 520 cam . . . . . . . . . . . . . . . . .$189.99
S&S 563
Best suited for 96" and larger high-performance street and racing engines with
high-compression ratios. Most effective
on top end from about 4500 rpm up.
Promotes easy starting due to the long
duration.
45794 563 cam . . . . . . . . . . . . . . . . .$189.99
S&S 561
Works well with all displacements and a
variety of compression ratios. Ideally
suited for stock to 88" engines with up
to 11:1 compression, 96" with 10:1
com-pression and larger engines with
no greater than 9.5:1 compression.
Moderate duration makes great midrange torque for performance where
most riding is done.
45796 561 cam . . . . . . . . . . . . . . . . .$189.99
New S&S Grinds
These new versions of some popular
S&S grinds work with stock or ported
heads to provide as much as a 10 horsepower gain over stock, but with better
low and midrange torque, while the
improved ramp design makes for quieter
operation. Valve spring spacing is not
required on the 510V, but is required
on the 675V. Please be sure to check all
other clearances. Fit all Evolution® Big
Twin engines from 1984 thru 1999.
601776 510V grind cam for engines to
93" with no greater than 10:1
compression . . . . . . . . . . . . .$189.99
601777 675V grind cam for engines over
120" with 11:1 or greater compression . . . . . . . . . . . . . . . . .$179.99
DRIVELINE
S&S Cam Specifications
Open
Close
Duration
@ .053
600
Intake
Exhaust
20°
60°
55°
20°
255°
260°
.600
.600
520
Intake
Exhaust
0°
50°
40°
2°
220°
232°
.520
.520
563
Intake
Exhaust
32°
64°
60°
32°
276°
276°
.560
.560
561
Intake
Exhaust
32°
50°
40°
26
252
256°
.560
.560
20°
52°
38°
20°
238°
252°
.510
.510
25°
70°
64°
25°
269°
275°
.675
.675
Grind
510V
Intake
Exhaust
675V
Intake
Exhaust
Valve
Lift
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
SHEETMETAL
GAUGES
CHEMICALS
Note: Valve spring spacing and all clearances should be checked before
final assembly
GENERAL
WWW.CUSTOMCHROME.COM
9.59
CROSS
REFERENCE
ANDREWS CAMS FOR EVOLUTION
Use the chart below to determine the
specifications for the cam you are
interested in purchasing.
Grind
Andrews Cams for Evolution® Big Twin Models
Unlock the hidden performance potential of your Evolution® Big Twin with this selection of popular offerings from Andrews. Cams for all models 1984 thru 1999, and may be used with the stock
hydraulic lifters which are capable of 6,000+ RPM.
ENGINE
9
Andrews ‘EV38’
The newest grind for Evolution® Big Twins is
perfect for lighter street driven bikes. This
combination grind offers great mid-range to
top end power. Longer exhaust duration helps
lower oil temp for longer engine life. Works
fine with stock valve springs for easy bolt-in
installation.
23909 Andrews EV38 cam . . . . . . . . . . . . $144.99
Andrews ‘EV23’
Bolt-in cam for heavier touring bikes and high
geared bikes with 65 tooth rear pulleys. More
power from 1500 to 6000 RPM. Works well at
high altitude.
23899 Andrews EV23 cam . . . . . . . . . . . . $149.99
Andrews ‘EV13’
Bolt-in cam for street or touring use with
more mid-range and upper end power than
the original EV1. similar to stock 1988 and
later OEM cams. Especially effective in reducing oil temperature in hot weather.
24220 Andrews EV13 cam . . . . . . . . . . . . $159.99
Andrews ‘EV27’
Bolt-in street cam with broad torque range
and fast open and close ramps. Pulls from
1,500-6,000 RPM.
24307 Andrews EV27 cam . . . . . . . . . . . . $159.99
Andrews ‘EV3’
Bolt-in cam for FXR and Softail® models. Lots
more mid-range power. Idle smoothness
unaffected. This is a 6000+ RPM cam for stock
springs and hydraulic lifters. Requires no head
work to install.
24257 Andrews EV3 cam . . . . . . . . . . . . . $149.99
Andrews ‘EV46’
A bolt-in cam with fast open and close ramps
in a grind similar to the EV3, but produces
higher static compression pressure permitting
6000+ RPM with stock heads and hydraulic
lifters.
24320 Andrews EV46 cam . . . . . . . . . . . . $159.99
Andrews ‘EV5’
For engines that have been mildly stroked
or had head work done. Stock hydraulics are
recommended with stock spring travel set to
.560" minimum. Makes excellent power from
2500-6500 RPM.
24258 Andrews EV5 cam . . . . . . . . . . . . . $149.99
9.60
Andrews ‘EV51’
Fast open and close ramps to generate good
high-RPM power without sacrificing low end
torque, and longer duration for modified
street engines with hydraulic lifters. Power
range from 3,000-6,500 RPM.
24319 Andrews EV51 cam . . . . . . . . . . . . $159.99
Andrews ‘EV59’
Designed for modified 80 to 88 inch motors.
Use with performance springs and collars.
Broad power band to 6,000 RPM.
24308 Andrews EV59 cam . . . . . . . . . . . . $159.99
Andrews ‘EV72’
Designed for 92 inch and larger street motors.
Use with performance springs and titanium
collars. Broad power band from 2,800-6,000
RPM.
24309 Andrews EV72 cam . . . . . . . . . . . . $159.99
Andrews ‘EV79’
High-compression engines of 92 inches or
more will run cooler at sustained high RPMs.
We recommend using the stock hydraulic lifters with Andrews springs and collars up to
7000 RPM.
24192 Andrews EV79 cam . . . . . . . . . . . . $179.99
Andrews ‘EV81’
A high-lift drag cam for 80"-88" motors with
compression ratios of at least 10.5:1. Provides
a wide torque band in motors that have headwork. This cam is capable of 6500+ RPM, but
requires hi-lift valve springs and collars
(CC #24198, #24199).
23906 Andrews EV81 cam . . . . . . . . . . . . $335.99
EV38
Intake
Exhaust
EV23
Intake
Exhaust
EV13
Intake
Exhaust
EV27
Intake
Exhaust
EV3
Intake
Exhaust
EV46
Intake
Exhaust
EV5
Intake
Exhaust
EV51
Intake
Exhaust
EV59
Intake
Exhaust
EV72
Intake
Exhaust
EV79
Intake
Exhaust
EV81
Intake
Exhaust
EV84
Intake
Exhaust
EV88
Intake
Exhaust
Open
Close
Duration
@ .053
Valve
Lift
21°
52°
37°
20°
238°
252°
.495
.500
10°
40°
30°
8°
220°
228°
.498
.498
15°
45°
31°
13°
226°
238°
.485
.495
20°
44°
36°
16°
236°
240°
.495
.495
21°
43°
37°
15°
238°
238°
.495
.495
25°
49°
41°
17°
246°
246°
.495
.495
28°
52°
44°
20°
252°
252°
.530
.530
28°
54°
44°
22°
252°
256°
.510
.510
28°
56°
48°
24°
256°
260°
.560
.560
30°
60°
54°
28°
264°
268°
.560
.560
31°
64°
55°
32°
266°
276°
.560
.550
32°
66°
60°
30°
272°
276°
.610
.610
32°
70°
64°
30°
276°
280°
.640
.640
34°
76°
70°
32°
284°
288°
.680
.680
Note: Late 1984-early 1986 Evolution® engines require their
pistons to be notched to obtain the necessary valve-to-piston
clearance.
Andrews ‘EV84’
A high-lift drag cam for 90"-100" motors with
compression ratios of at least 10.5:1. Provides
a wide torque band in motors that have headwork. This cam is capable of 6500+ RPM, but
requires hi-lift valve springs and collars
(CC #24198, #24199).
23907 Andrews EV88 cam . . . . . . . . . . . . $335.99
Andrews ‘EV88’
A high-lift drag cam for 100"+ motors with
compression ratios of at least 10.5:1. Provides
a wide torque band in motors that have headwork. This cam is capable of 6500+ RPM, but
requires hi-lift valve springs and collars
(CC #24198, #24199).
23908 Andrews EV88 cam . . . . . . . . . . . . $335.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Top Dead Center
Piston Stop Tools
These handy tools from Crane Cams
are used to set the piston at TDC. Fit all Big
Twin and Sportster® models from 1936 to present. Sold each.
24522 Fits 14mm sparkplug holes . . . . . . $19.99
24523 Fits 12mm sparkplug holes . . . . . . $19.99
Please see cautionary information following page Ref.65
CRANE CAMS FOR EVOLUTION
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
Crane ‘FireBall’ Cams
for Evolution® Big Twin Models
FireBall grind cams are for all Evolution® Big
Twin models 1984 thru 1999. These are bolt-in
performance cams that deliver streetable
performance even in a stock engine. The
FireBall cams do not have the multi-index
feature which makes them a lower cost alternative to Crane’s adjustable ‘Hi-Roller’ cams.
Available with or without gear.
FireBall ‘3002B’
This is a bolt-in cam for use with hydraulic
lifters. It provides a broad power range for
streetable performance and is comparable to
an Andrews ‘EV13’ grind.
24037 Fireball 300-2B cam. . . . . . . . . . . . $185.99
24640 Fireball 300-2B cam w/o gear . . $125.99
Crane ‘Hi-Roller’ Cams for Evolution® Big Twin Models
The power of an Evolution® Big Twin engine can be very dramatic when a good performance cam
is installed. Stock hydraulic lifters are capable of 6000+ RPM with stock springs and no valve float.
Crane’s cam grinds have adjustable cam gears which permit you to advance or retard timing by 4°,
permitting adjustment of the power-band for more torque down low or more horsepower on the
top end.
Hi-Roller ‘H286-2B’ Grind
Hi-Roller ‘H314-2’ Grind
This hydraulic cam provides bolt-in perforDesigned especially for large displacement
mance with a noticeable increase throughout
engines to provide maximum street and strip
the RPM range. An excellent cam for speed
performance.
or touring. Larger performance increases can
24517 Hi-Roller cam. . . . . . . . . . . . . . . . . . . $249.99
be achieved with high-performance carb and
Specifications
for Crane ‘Hi-Roller’ Cams
exhaust changes.
DURATION
VALVE
24122 Hi-Roller cam. . . . . . . . . . . . . . . . . . . $249.99 GRIND
OPEN
CLOSE
@ .053
LIFT
Hi-Roller ‘H290-2’ Grind
Produces strong low end and midrange. Works
well with higher-than-stock compression or
increased displacement, up to 88 cubic inches.
24516 Hi-Roller cam. . . . . . . . . . . . . . . . . . . $249.99
Hi-Roller ‘H296-2’ Grind
A hydraulic cam designed to provide increased
performance in mid and upper RPM range
while still providing good streetability.
Requires carb and exhaust changes for optimum performance and must check all clearances.
24123 Hi-Roller cam. . . . . . . . . . . . . . . . . . . $249.99
Hi-Roller ‘H304-2’ Grind
Produces a wide power range in engines with
at least 10:1 compression, and is very good for
strokers up to 95 cubic inches.
24515 Hi-Roller cam. . . . . . . . . . . . . . . . . . . $249.99
Hi-Roller ‘H306-2’ Grind
A hydraulic cam designed for street or strip use
in modified engines with performance carb
and exhaust. Valve-to-valve and valve-to-piston
clearances must be checked.
24124 Hi-Roller cam. . . . . . . . . . . . . . . . . . . $249.99
Hi-Roller
Intake
Exhaust
Hi-Roller
Intake
Exhaust
Hi-Roller
Intake
Exhaust
Hi-Roller
Intake
Exhaust
Hi-Roller
Intake
Exhaust
Hi-Roller
Intake
Exhaust
Hi-Roller
Intake
Exhaust
‘H286-2B’
19°
48°
‘H290-2’
17°
45°
‘H296-2’
23°
56°
‘H304-2’
24°
55°
‘H306-2’
28°
69°
‘H310-2’
23°
68°
‘H314-2’
26°
65°
43°
24°
242°
252°
.490
.490
43°
23°
240°
248°
.581
.581
49°
26°
252°
262°
.490
.500
50°
25°
254°
260°
.600
.600
54°
23°
262°
272°
.500
.510
63°
28°
266°
276°
.550
.550
54°
21°
260°
266°
.600
.600
FireBall ‘3102’
This is a bolt-in cam for use with hydraulic
lifters and a stock carburetor. It also works
well with a performance carb and exhaust.
Comparable to an Andrews ‘EV3’.
24318 Fireball 310-2 cam . . . . . . . . . . . . . $179.99
24641 Fireball 310-2 cam w/o gear . . . . $125.99
FireBall ‘3162B’
This bolt-in cam is for use with hydraulic lifters.
It works best with high-performance carbs and
exhaust, and provides increased performance
throughout the RPM range. It’s excellent
for both performance and touring, and was
designed to be comparable to the Andrews
‘EV35’.
24316 Fireball 316-2B cam. . . . . . . . . . . . $179.99
24642 Fireball 316-2B cam w/o gear . . $125.99
Specifications for Crane ‘FireBall’ Cams
GRIND
Fireball
Intake
Exhaust
Fireball
Intake
Exhaust
Fireball
Intake
Exhaust
Fireball
Intake
Exhaust
OPEN
‘3002B’
12°
41°
‘3102’
19°
46°
‘3162B’
19°
48°
‘3262’
23°
56°
CLOSE
DURATION
@ .053
VALVE
LIFT
34°
15°
226°
236°
.490
.490
37°
16°
236°
242°
.490
.490
43°
24°
242°
252°
.490
.490
49°
26°
252°
262°
.490
.500
Note: Late 1984-early 1986 Evolution® engines require their
pistons to be notched to obtain the necessary valve-to-piston
clearance.
Note: Late 1984-early 1986 Evolution engines require their
pistons to be notched to obtain the necessary valve-to-piston
clearance.
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
SHEETMETAL
GAUGES
®
CHEMICALS
Hi-Roller ‘H310-2’ Grind
A hydraulic cam designed for engines with
increased compression and/or more cubic
inches. The ideal choice for engines with head
work, performance carburetors and exhaust.
Performance springs required to accommodate
the increased lift.
24125 Hi-Roller cam. . . . . . . . . . . . . . . . . . . $249.99
GENERAL
WWW.CUSTOMCHROME.COM
9.61
CROSS
REFERENCE
ANDREWS CAMS FOR PANHEAD . SHOVELHEAD
‘#6’ Grind
Hotter version of a ‘B’ grind. Great street cam especially for 84" and 88"
strokers with maximum torque from 2500-6500 RPM.
24330 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
24331 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
24332 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
‘C’ Grind
The best production cam made for big street engines. Stroker motors
from 84 to 96 inches will really turn on this cam. Broad torque range
pulls from 2000-7000+ RPM.
24333 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
24334 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
24335 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
Andrews Cams for Panhead and Shovelhead Motors
All Andrews/Custom Chrome® cams are computer designed and precision
ground from alloy steel billets.
‘J’ Grind
Mild street; Panheads and Shovelheads, smooth idle, more power through
RPM range. Bolts in with no head work.
24276 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
24277 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
24278 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
ENGINE
9
‘F’ Grind
Basically an ‘A’ grind cam with delayed timing for no ping! Lots more
power than stock cam. Bolts into Shovelheads (except 1980 thru 1981
models) with no head work.
24282 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
24283 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
24284 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
‘A’ Grind
Street/Drags; bolts into Shovelhead engines (except 1980 thru 1981 models) with no head work. More mid-range and top-end power. Idle smoothness
is unaffected.
24250 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
24251 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
24252 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
‘B’ Grind
Street/Drags: much more mid-range and top-end power. Idle smoothness
unaffected. The cam for modified 74" and 80" motors and small strokers.
Spring spacing required, or use with CC #24295 medium lift spring collars,
and CC #24296 low-profile spring collars to simplify installation
24253 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
24254 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
24255 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99
‘AB’ Grind
An ‘A’ intake and a long-duration exhaust for cooler running and more
top-end power. Bolts into Shovelheads (except 1980 thru 1981 models)
with no head work. Works with hydraulic lifters.
24157 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $179.99
24158 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $179.99
24159 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $179.99
‘BH’ Grind
Hydraulic version of ‘B’ cam. Usually a bolt-in, but spring spacing may be
required on 1980 thru 1981 Shovelhead models. CC #24295 and CC #24296
spring collar kits are recommended to simplify installation.
24285 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
24286 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
24287 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
9.62
‘#1’ Grind
This version of an ‘A’ grind cam was designed for 74" and 80" engines
with low compression pistons.
24288 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
24289 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
24290 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
‘#2’ Grind
This one is the low compression version of a ‘B’ grind cam. More power
throughout the RPM range for 74" and 80" engines with low
compression pistons.
24292 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
24293 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
Grind
‘J’ Grind
Intake
Exhaust
‘F’ Grind
Intake
Exhaust
‘A’ Grind
Intake
Exhaust
‘B’ Grind
Intake
Exhaust
‘AB’ Grind
Intake
Exhaust
‘BH’ Grind
Intake
Exhaust
‘#6’ Grind
Intake
Exhaust
‘C’ Grind
Intake
Exhaust
‘#1’ Grind
Intake
Exhaust
‘#2’ Grind
Intake
Exhaust
Open
Close
Duration
@ .053
Valve Lift
Shovel
Pan
21°
41°
41°
21°
242°
242°
.405
.405
.425
.425
16°
48°
48°
16°
244°
244°
.450
.450
.470
.470
21°
43°
43°
21°
244°
244°
.450
.450
.470
.470
26°
50°
50°
26°
256°
256°
.485
.485
.507
.507
21°
50°
43°
26°
244°
256°
.450
.450
.470
.470
24°
52°
52°
24°
256°
256°
.450
.450
.470
.470
32°
56°
56°
32°
268°
268°
.510
.510
.535
.535
37°
61°
61°
37°
278°
278°
.525
.525
.550
.550
16°
36°
36°
16°
232°
232°
.427
.427
.450
.450
15°
35°
35°
15°
230°
230°
.490
.490
—
—
Note: In Big Twin motors 1948 thru 1969, the clearance between the front exhaust lobe and the
ignition drive gear must be checked and modified if required. Big Twin motors 1948 thru 1957
will also require that the clearance between the front intake lobe and the engine case be
checked and modified as necessary.
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
CRANE CAMS FOR PANHEAD . SHOVELHEAD
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Cam Shims for Big Twins
Crane ‘FireBall’ Cams
for Panheads and Shovelheads
These are bolt-in performance cams that deliver streetable performance
even in a stock engine. The FireBall cams do not have the multi-index
feature which makes them a lower cost alternative to Crane’s adjustable
‘Hi-Roller’ series of cams.
FireBall ‘300H’
These are bolt-in cams for use with hydraulic lifters. They provide a
broad power range for streetable performance and are comparable to
an Andrews ‘BH’ grind.
24034 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99
24035 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $189.99
24036 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $189.99
FireBall ‘296A’
Bolt-in cams for use with solid lifters. They provide increased performance throughout the power range. No spring changes are required,
and they work well with the stock carbs and exhaust. They are comparable to an Andrews ‘A’ grind.
24310 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99
24311 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99
24312 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $189.99
For all Big Twins from 1936 thru 1999, and made in the U.S.A. The 10piece set includes a selection of shims from .050" thru .095" to aid in
camshaft installation. Each shim from the set is also available in shop
supply packs of five each.
20210 Set of 10 shims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.99
Shims Available in 11 Different Sizes
Sold in packs of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99
20211 .050" thick (OEM 25550-36)
20212 .055" thick (OEM 25551-36)
20213 .060" thick (OEM 25552-36)
20214 .065" thick (OEM 25553-36)
20215 .070" thick (OEM 25554-36)
20216 .075" thick (OEM 25555-36)
20217 .080" thick (OEM 25556-79)
20218 .085" thick (OEM 25557-79)
20219 .090" thick (OEM 25558-79)
20220 .095" thick (OEM 25558-79)
20221 .100" thick
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
FireBall ‘308B’
These cams are for use with solid lifters which provide increased midrange and top-end performance. The stock springs may be used without
additional head work. They work well with performance carbs and
exhaust, and were designed to be comparable to an Andrews ‘B’ grind.
All clearances must be checked.
24313 1948 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99
24314 1970-early 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99
24315 Late 1977 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $189.99
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
Specifications for Crane ‘FireBall’ Cams
Grind
FireBall ‘300H’
Intake
Exhaust
FireBall ‘296A’
Intake
Exhaust
FireBall ‘308B’
Intake
Exhaust
Open
Close
Duration
@ .053
Valve Lift
Shovel
Pan
24°
44°
44°
24°
248°
248°
.455
.455
.479
.479
20°
44°
44°
20°
244°
244°
.455
.455
.479
.479
26°
50°
50°
26°
256°
256°
.490
.490
.516
.516
FORKS
& SHOCKS
SHEETMETAL
Cam Thrust Plates
American-made reproductions of the Original Equipment part. Fit all
Big Twins from 1958 thru 1999. Pack of 5.
25404 Replaces OEM 25550-57 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.99
Note: In Big Twin motors 1948 thru 1969, the clearance between the front exhaust lobe and the
ignition drive gear must be checked and modified if required. Big Twin motors 1948 thru 1957
will also require that the clearance between the front intake lobe and the engine case must be
checked and modified as necessary.
GAUGES
CHEMICALS
GENERAL
WWW.CUSTOMCHROME.COM
9.63
CROSS
REFERENCE
ANDREWS CAMS FOR SPORTSTER
Andrews Cam Kits for Evolution® Sportster®
and Buell® Models
These are the most popular cam kits for Evolution® Sportster®
and Buell® models that Andrews sells. Fit all 883cc thru 1200cc
models from 1986 thru 1999.
‘V2’ and ‘N2’ Cams and Cam Kits
Bolt-in cams for stock 883cc-1200cc engines with extra power from
2000-6000 RPM. Stock springs and hydraulic lifters are recommended.
Can be used with stock pushrods. Available kitted with the cams and
four adjustable aluminum push-rods, or the cams are available by themselves.
24038 ‘V2’ Cam kit (1986 thru 1990 models) . . . . . . . . . . . . . . . . . . . . . $385.99
23910 ‘V2’ Cams ONLY (1986 thru 1990 models) . . . . . . . . . . . . . . . . . $335.99
24207 ‘N2’ Cams ONLY (1991 thru 1999 models) . . . . . . . . . . . . . . . . . $329.99
‘V4’ and ‘N4’ Cams and Cam Kits
Street/drags: For stock or modified 883cc-1200cc engines. Has a slightly
higher idle speed, but produces power from 2500-6500 RPM. Stock
springs and hydraulic lifters are recommended. Can be used with stock
pushrods. Available kitted with the cams, four adjustable chromemoly
pushrods and a set of titanium upper spring collars, or the cams are
available by themselves.
24039 ‘V4’ Cam kit (1986 thru 1990 models) . . . . . . . . . . . . . . . . . . . . . $479.99
23911 ‘V4’ Cams ONLY (1986 thru 1990 models) . . . . . . . . . . . . . . . . . $335.99
24208 ‘N4’ Cams ONLY (1991 thru 1999 models) . . . . . . . . . . . . . . . . . $329.99
ENGINE
9
‘V6’ and ‘N6’ Cams
For modified 1200cc engines and high-compression pistons up to 80".
These cams produce power from 2500-6500 RPM. Stock springs
and lifters are recommended. Can be used with stock pushrods.
23912 ‘V6’ Cams ONLY (1986 thru 1990 models) . . . . . . . . . . . . . . . . . $335.99
23913 ‘N6’ Cams ONLY (1991 thru 1999 models) . . . . . . . . . . . . . . . . . $335.99
‘V8’ and ‘N8’ Cams
For modified 1100cc-1200cc and stroked 883cc engines. Produces great
mid-range power from 2000-6000 RPM. Stock springs and hydraulic lifters recommended. Can be used with stock pushrods.
23914 ‘V8’ Cams ONLY (1986 thru 1990 models) . . . . . . . . . . . . . . . . . $335.99
23915 ‘N8’ Cams ONLY (1991 thru 1999 models) . . . . . . . . . . . . . . . . . $335.99
‘V80’ and ‘N80’ Cams
For highly-modified 61"-77" engines with at least 10.5:1 high-compression pistons and head work. These cams produce power beyond 6500
RPM. Hydraulic lifters and good-quality adjust-able pushrods are recommended. Hi-lift valve springs and collars (CC #24198, #24199) must be
used.
23916 ‘V80’ Cams ONLY (1986 thru 1990 models) . . . . . . . . . . . . . . . . $485.99
23917 ‘N80’ Cams ONLY (1991 thru 1999 models) . . . . . . . . . . . . . . . . $485.99
Grind
Open
‘V2’ and ‘N2’ Grinds
Intake
22°
Exhaust
46°
‘V4’ and ‘N4’ Grinds
Intake
30°
Exhaust
52°
‘V6’ and ‘N6’ Grinds
Intake
34°
Exhaust
56°
‘V8’ and ‘N8’ Grinds
Intake
32°
Exhaust
56°
‘V80’ and ‘N80’ Grinds
Intake
32°
Exhaust
66°
9.64
Close
Duration
@ .053
Valve
Lift
38°
18°
240°
244°
.465
.440
46°
24°
256°
256°
.490
.490
50°
28°
264°
264°
.500
.500
44°
28°
256°
264°
.490
.500
60°
30°
272°
276°
.600
.600
24039
Andrews Cams for Early Sportster® Models
‘Y’ Cams
Biggest cams available for no headwork installation. Excellent midrange and upper end power. Can use stock springs. A 9:1 or higher compression ration is required for best performance. Sold in sets.
011328 Fits Sportster® models from 1957 thru 1970 . . . . . . . . . . . . . $419.99
011329 Fits Sportster® models from 1971 thru 1980 . . . . . . . . . . . . . $399.99
011330 Fits Sportster® models from 1981-early 1984* . . . . . . . . . . . $399.99
‘PB+’ Cams
Great bolt-in cams for more power throughout the rpm range. No head
work required. Can use stock springs up to 7000 rpm. Sold in sets.
011325 Fits Sportster® models from 1971 thru 1980
011326 Fits Sportster® models from 1981-early 1984
Open
Close
Duration
@ .053
Valve
Lift
‘Y’ Grind
Intake
Exhaust
35°
53°
47°
29°
262°
262°
.425"
.425"
‘PB+’ Grind
Intake
Exhaust
34°
43°
40°
31°
254°
254°
.410"
.410"
Grind
*Note: 1982 models may require spring spacing
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
CAM COVERS . SUPPORT PLATES
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
Back
HAND
CONTROLS
Front
LIGHTING
Fueling Cam Support Plates For Twin Cam 88® Models
• Increases engine oil flow and volume by enlarging critical oil passages and the oil pump reservoirs. The cam plate is blue printed and
matched to the Fueling oil pump which allows the engine to take full
advantage of the increased volume from the Fueling oil pump
• Made from 7075 billet aluminum and hard anodized which increases
the strength and hardness of the camplate, holds tighter tolerances
under temperature and eliminates the pinion shaft bushing
• Increased oil flow to pinion shaft and connecting rod bearings
• Tighter cam bearing bore tolerance for improved press fit
• Pressure relief valve and spring are designed for increased volume
and pressure, eliminating the need to stretch the spring or use a shim
• Decreases engine temperature by 20 degrees
• When matched with the Fueling Race Pump rear wheel power gains
of three horsepower and four ft/lbs of torque are achieved
• For use ONLY with the Feuling oil pumps
• Includes bearing retainer plate and hardware
• Bolts into stock location
622151 Fits Twin Cam 88® engines with gear drive cams (except 2006
Dyna Glide® models) from 1999 thru 2006 . . . . . . . . . . . . . . $385.99
622152 Fits Twin Cam 88® engines with chain drive cams (except 2006
Dyna Glide® models) from 1999 thru 2006 . . . . . . . . . . . . . . $414.99
622153 Fits 2006 Dyna Glide® models, and all 2007 Big Twin models
ELECTRICAL
Electronic Ignition Cam Cover Conversion Kits
for Twin Cam 88® Engines
This kit converts all Twin Cam 88® engines to earlier electronic ignitions,
and can be used with any aftermarket ignition and rotor cup system.
It’s a great for building customs with Twin Cam 88® engines to simplify
the wiring process. You can now wire your bike with all aftermarket
Evolution® wire harnesses.
642501 Conversion kit for engines with chain drive cams . . . . . . . $629.99
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $385.99
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
• Machined out of 6061-T6 billet aluminum
• Measures .645"-thick
• Precise tolerances tighten up the alignment
of your cams and pinion bore
• Optimized oil passages improve efficiency
of oil distribution
• Uses NPT pipe plugs instead of pressed-in
ball bearings to block oil passages
• Utilizes a 2000 to present bearing retainer
plate
17531 Fits all Twin Cam 88® models from
1999 to present . . . . . . . . . . . . . . . $385.99
FORKS
& SHOCKS
Chrome Cam Covers
for Big Twins
Delkron Billet Cam Plate
for Twin Cam 88® Models
Chrome Covers for Late Model
Cam Covers
Unlike some of the other covers being sold
today, these stamped steel covers completely
enclose your cam and point covers like a second skin. They provide an economical means
of chroming the right side of your engine.
Includes all necessary mounting hardware.
For all Big Twins 1970 thru 1992.
28501 Plain version . . . . . . . . . . . . . . . . . . . $39.99
Note: FX and FXR models with mid-shift may require the
brake pedal to be temporarily removed to facilitate the
installation of these covers. Also, due to the wide variety of
Original Equipment and aftermarket exhaust systems being
used, it may be necessary to remove the front exhaust pipe
to gain access to the two lower bolts on the cam cover
WWW.CUSTOMCHROME.COM
These top-quality, chrome-plated aluminum
covers are complete with all the necessary
parts to convert your plain cover to a show
stopper. Models are available to cover each
modification made to the oil pumps and oiling system. Covers include chrome sockethead
screws, bushings must be sized prior to installation.
28116 1993 thru 1999 end oiling (repl. OEM
25256-93) . . . . . . . . . . . . . . . . . . . . . $142.99
28115 1973 thru 1992 end oiling (repl. OEM
25268-84A) . . . . . . . . . . . . . . . . . . . $142.99
28141 1970-early 1973 side oiling (repl. OEM
25218-70) . . . . . . . . . . . . . . . . . . . . . $129.99
Accessories
36264 Colony chrome sockethead screw set
to replace stock screws in stock
gear covers . . . . . . . . . . . . . . . . . . . . . $7.99
9.65
SHEETMETAL
GAUGES
CHEMICALS
GENERAL
CROSS
REFERENCE
CAM COVERS
U.S. Design Patent #D428,832
02048
02047
Xzotic™ Generator-Style Cam Covers for Evolution® Models
Transform your modern Evolution® model with an Xzotic™ cam cover. Keep your electronic ignition while adding a classic look to your bike. Combine
with Xzotic's Pan or Shovelhead rocker box covers and classic exhaust headers to give the appearance of ’48-’69 model. Replaces the stock cam cover.
Must use OEM ignition. Complete with all necessary hardware.
02046
Fits Evolution® Big Twin models from 1993 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $499.99
02047
Fits Evolution® Big Twin models from 1984 thru 1992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $479.99
Note: Use of front exhaust header CC #’s 02057, 02058, 02059, or complete header set CC #’s 02055, 02056 is required to clear the generator cover.
U.S. Design Patent
#D428,832
ENGINE
9
Xzotic Generator and Distributor Kit
Gives the appearance that a generator is actually installed on your late-model motorcycle. Fits Xzotic™ generator cam covers for Evolution® models.
02048
Natural finish with chrome covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $92.99
602103 Polished finish with chrome covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $135.99
Xzotic™ Generator-Style Cam Cover
for Twin Cam 88® Models
Quality cast cover gives the look of a vintage generator model. Combine
with Xzotic's Pan or Shovelhead rocker box covers to complete the retro
look. Easy to install, it fits over the existing cam cover. Complete with all
necessary hardware.
02044 Fits Twin Cam 88® models from 1999 to present . . . . . . . . . . . $249.99
S&S ‘Super Stock™’ Generator Style Case Gearcover
To top off its Super Stock generator style crankcases for Big Twins, S&S
developed a crankcase gear cover for these engines. CNC-machined
from 356-T6 aluminum for close tolerances and extra strength, each
cover is designed with a special removal mechanism to prevent damage to the crankcase/cover during disassembly. Crankcase ventilation
and oil-air mist separation is improved via a larger, redesigned baffle
chamber. Bushings are pre-installed to factory specifications. Gasket and
hardware included.
45779 Fits all Big Twin models from 1954 thru 1969 . . . . . . . . . . . . . . $189.99
Generator Oil Filter Adapter
This adaptor allows you to install an oil
filter in place of the generator on 1936-69
motors as well as our Pandemonium or S&S
Shovelhead engines with generator/alternator
bottoms. Use OEM 63796-77A or equivalent
aftermarket oil filter. Chrome finish.
632025 Generator oil filter adapter . . $114.99
9.66
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
CAM PARTS
INDEX
APPAREL
20082
25400
SEATS
& BAGS
20063
FOOT
CONTROLS
25403
Motor Factory® Cam Bearings
American-made Torrington bearings for
Sportster® and Big Twin models. Sold each.
25400 Fits Sportster® models from 1954 thru
1990 (repl. OEM 9057) . . . . . . . . . . . $5.29
25403 Fits all Big Twin models from 1958
thru 1999 (repl. OEM 9058) . . . . . . $5.29
53973
53974
Motor Factory® Cam Bearings
for Twin Cam 88® Models
Fit models from 1999 to present.
53973 Camshaft ball bearing (repl. OEM
8990A). Set of 2 . . . . . . . . . . . . . . . . $31.99
53974 Camshaft needle bearing (Torrington)
repl. OEM 9198. Set of 2 . . . . . . . . $15.99
75888 Camshaft roller bearing OEM upgrade
for rear cam. Can be used on front
cam (repl. OEM 8983) sold each $35.99
20062
JIMS®
Camshaft Seal
Cam and Pinion Shaft Bushings
American-made bushings and retaining dowels.
Sold each unless otherwise noted.
Cam Bushings
20062 Cam cover bushing. Fits Big Twin models
from 1936 thru 1969 (repl. OEM 25581-36) . . . $11.99
26010 Cam cover bushing. Fits Big Twin models
from 1970 thru 1999 (repl. OEM 25581-70) . . . $11.99
20650 JIMS® standard cam cover bushing. Fits Big Twin
models from 1970 thru 1999
(repl. OEM 25581-70) . . . . . . . . . . . . . . . . . . . . . . . . $18.99
20082 Cam bushing. Fits the #1, #3 and #4 cams in the cam
cover of all Sportster® and K models 1952 thru 2003,
and all four cams in the crankcase of all Sportster®
models 1991 thru 2003 (repl. OEM 25586-37) . $11.99
26012 Cam bushing. Fits the #2 cam in the cam cover of all
Sportster® models from 1957 thru 1990
(repl. OEM 25588-57) . . . . . . . . . . . . . . . . . . . . . . . . $15.99
Pinion Shaft Bushings
20063 Pinion shaft bushing. Fits Big Twin models
from 1954 thru 1992
(repl. OEMs 25582-54, 25582-73) . . . . . . . . . . . . . . $9.69
26011 Pinion shaft bushing. Fits Big Twin models
from 1973 thru 1992 (repl. OEM 25582-73) . . . $10.99
19991 Pinion shaft bushing. Fits Big Twin models
from 1993 thru 1999 (repl. OEM 25582-93) . . . $10.99
20094 Dowel. Fits pinion shaft bushing on many Big Twin,
Sportster® and K-models from 1930 thru 2003
(repl. OEM 275) pack of 25 . . . . . . . . . . . . . . . . . . . . $9.59
Top-quality seal for all Big Twin
models from 1970 thru 1999.
Sold each.
20765 Replaces OEM 83162-51
HAND
CONTROLS
LIGHTING
. . . . . . . . . . . . . . . . . . . . $8.99
ELECTRICAL
EXHAUST
INTAKE
Inner Camshaft Bearing
by Crane
Inner Torrington cam bearing has
the highest static and dynamic
load rating to provide stable
camshaft operation under even
the severest use.
24569 Fits all Big Twin models
from 1958 thru 1999
(repl. OEM 9058) . . . $9.99
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
SHEETMETAL
Cam Cover Air-Oil Separators
Cam Gear Gauge Pins
Cam Shims for Sportster® Models
A must when setting up new cams. Fit 1957
thru 1985 Sportster® engines. Packs of 10.
20084 .007"-thick (repl. OEM 6769) . . . . . $3.79
20085 .005"-thick (repl. OEM 6770) . . . . . $3.89
These pins are used to properly determine
cam and pinion gear sizes.
Sold in pairs.
24196 .105"-diameter . . . . . . . . . . . . . . . . . $17.99
24197 .108"-diameter . . . . . . . . . . . . . . . . . $17.99
WWW.CUSTOMCHROME.COM
These are Original Equipment parts. First fitted as Original Equipment on 1991 model Big
Twins, these little baffles can be used in the
cam cover stand pipe on any Evolution® Big
Twin model to cut down on messy oil transfer
problems. They are also useful when inserted
into the breather hose on models up to 1992
and into the rocker box venting hoses on
1993 and later models with high
flow air cleaners.
75391 Replaces OEM 25329-91
(pack of 10) . . . . . . . . . . . . . . . . . . . . $47.99
9.67
GAUGES
CHEMICALS
GENERAL
CROSS
REFERENCE
POINT COVERS
37860
37861
37862
33152
Cast Aluminum ‘Skull’ Engine and Primary Covers
ENGINE
9
Each of these classic designs is highlighted by making it 3-dimensional. All
parts are manufactured in the USA from sand-cast, polished aluminum.
Point Covers
Derby Covers
Fits all Big Twin and Sportster®
Fits all Big Twin models from 1970
thru 1998
models with horizontal mounting
holes from 1970 thru 2003
37860 Skull . . . . . . . . . . . . . . . $84.99
37862 Skull . . . . . . . . . . . . . . . $37.99
Inspection Covers
Fits Twin Cam 88® models from
Fits all 4-speed FL and FX models
1999 to present
with forward controls from 1965
37728 Skull . . . . . . . . . . . . . . . $35.99
thru 1986, and all Softail® or Dyna
Wide Glide® models from 1984 to
present
37861 Skull . . . . . . . . . . . . . . . $49.99
33153
18916
18917
Forward Facing Skull Point Covers
19008
19007
‘Live To Ride’ Point Covers
Ominous 3-dimensional skulls design. Made from polished aluminum,
each piece is sand-cast from a hand-carved original.
33152 Fits Twin Cam 88® models from 1999 to present . . . . . . . . . . . . $37.99
33153 Fits all Big Twin and Sportster® models with horizontal mounting
holes from 1970 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $37.99
Fits all models from 1970 thru 2003 (except Twin Cam 88® models).
‘A Way of Life’
Sold each.
19007 Horizontal mounting
holes. . . . . . . . . . . . . . . $13.99
19008 Vertical mounting holes
‘Eagle Spirit’
Sold each.
18916 Horizontal mounting
holes. . . . . . . . . . . . . . . $19.99
18917 Vertical mounting holes
. . . . . . . . . . . . . . . . . . . . $13.99
. . . . . . . . . . . . . . . . . . . . $19.99
Chrome Point Cover and
Mounting Screws
Fits all Sportster® and Big Twin models 1970 thru
2003 (except Twin Cam 88® models).
15151 Plain (repl. OEM 32582-85T) . . . . . . . . $6.99
36259 Colony chrome sockethead point cover
screws for models 1979 thru 1999 . . . $3.59
Multiple Skull Point Cover by Skull Enterprises
Note: For additional selections of Derby and Inspection
Covers — see Section 12 “Driveline”
9.68
Polished cast aluminum from hand carved mold. Fits all Big Twin and
Sportster® models from 1970 thru 1999 (except Twin Cam 88® models).
37729 Point cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $27.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
POINT COVERS
INDEX
APPAREL
Points Covers from Indian Larry Legacy
Featuring the respected Indian Larry Legacy logo, these
points covers fit Big Twin HD’s 1970-1999 and Sportsters
1971-2003. Offered in either Vertical or Horizontal mounting, and .available chrome plated or polished brass.
Look Bitchin'!
632992 Indian Larry Chrome Points
Cover Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99
632990 Indian Larry Brass Points
Cover Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99
632993 Indian Larry Chrome Points
Cover Vertical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99
632991 Indian Larry Brass Points
Cover Vertical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
030136
030135
ENGINE
GASKETS
TRANNY
& CLUTCH
Point Covers for Twin Cam 88® Models
DRIVELINE
Made from chrome plated billet aluminum. Available in
smooth finish, or with 3-D skull. Fit all Twin Cam 88® models
from 1999 to present
030135 Smooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $28.99
030136 Skull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $37.99
614514
614515
614516
614517
614518
614519
614520
614521
WHEELS,
TIRES
& BRAKES
FRAMES
Pro-One™ Two-Piece Billet Point Covers
Mix and match the chrome and black anodized covers and inserts to create the custom look you want. All covers and inserts are CNC-machined
from 6061-T6 billet aluminum right here in the USA, and feature hidden
hardware for a super clean look. Includes all necessary mounting hardware. Base plates and inserts sold separately.
Point Cover Base Plates ONLY
Chrome
Black Anodized
614504
614505
FORKS
& SHOCKS
SHEETMETAL
Fits all Big Twins from 1984 thru 2007 . . . . . . . .$64.95
GAUGES
Inserts ONLY
Chrome
Black Anodized
614514
614516
614520
614518
614515
614517
614521
614519
Smooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.95
Ball-Milled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.95
Flame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.95
Spider Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.95
CHEMICALS
Note: Billet points cover base plates and inserts are sold separately.
GENERAL
Note: For additional selections of Derby and Inspection
Covers — see Section 12 “Driveline”
WWW.CUSTOMCHROME.COM
9.69
CROSS
REFERENCE
POINT COVERS
Jesse James WCC Point Covers
2-piece design allows you to color match this
part to your bike. Available with either an
‘FTW’ or ‘WCC’ logo.
‘FTW’ design
690406 2-hole fits all models from 1970
thru 2003 (except Twin Cam models)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.99
690407
5-hole fits all Twin Cam® models
from 1999 to present . . . . . . . . . $99.99
‘WCC’ design
690408 2-hole fits all models from 1970
thru 2003 (except Twin Cam models)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.99
690409
5-hole fits all Twin Cam® models
from 1999 to present . . . . . . . . . $99.99
ENGINE
9
‘Domed’ Point Cover
Cylinder Base Cover for
Twin Cam 88® Models
by KüryAkyn™
Smooths the transition between the cylinders and the
engine cases. This form-fitting cover chromes the entire
gap between the cylinder base and the inner primary. Fits
all Softail® models from 2000 thru 2007, all Touring models
from 1999 thru 2007, Dyna Wide Glide® models from 1999
thru 2005, and any Dyna Glide® model that has been converted to forward controls from 1999 thru 2005.
600383 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $55.99
‘Riveted’ Point Cover
Chrome-plated with six non-functional buttonhead rivets for that high-tech ‘racers only’
look. Includes hardware.
37251 Fits all Sportster® and Big Twin models
1970 thru 2003 (except Twin Cam 88®
models) . . . . . . . . . . . . . . . . . . . . . . . . $19.99
A beautiful chrome die-cast point
cover complete with screws for
all Sportster® and Big Twin models 1970 thru 2003 (except Twin
Cam 88® models).
15153 Replaces OEM 32584-88T
. . . . . . . . . . . . . . . . . . . . $8.99
Note: For additional selections of Derby and Inspection Covers — see Section 12 “Driveline”
9.70
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
POINT COVERS
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
Chrome Ness-Tech®
Flamed Point Cover
Machined from chrome-plated
billet aluminum. Matching covers available. Fits all models with
horizontal mounting holes from
1970 thru 2003 (except Twin Cam
88® models)
05059 Sold each . . . . . . . . . $45.99
LIGHTING
‘Mirage®’ Point Covers
• Chrome-plated die-cast construction
• Decorative black slots can be painted
to match bike
• Unique “hidden mounting bolts” – no
unsightly hardware visible when installed
• Includes gasket and hardware
• Matches other ‘Mirage’ items
27147 Fits all models from 1970 thru 2003
(except Twin Cam 88® models) . . $24.99
27609 Fits Twin Cam 88® models from 1999
to present. . . . . . . . . . . . . . . . . . . . . . $24.99
ELECTRICAL
EXHAUST
Rear Cylinder Base Cover for Touring
Models by KüryAkyn™
Fits all Touring models from 2002 thru 2007.
600392 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $37.99
INTAKE
ENGINE
GASKETS
27487
65349
65451
TRANNY
& CLUTCH
65351
DRIVELINE
WHEELS,
TIRES
& BRAKES
65346
65454
Pro-One™ ‘Millennium’ Covers
Chrome billet engine covers feature
rounded edges. Available in smooth or
ball milled styles.
Derby Covers
Fit all Big Twins from 1970 thru 1998
65348 Smooth . . . . . . . . . . . . . . . . . . .$84.99
65349 Ball milled . . . . . . . . . . . . . . . .$84.99
Fit all Big Twins from 1999 to present
65451 Smooth . . . . . . . . . . . . . . . . . . .$94.99
65452 Ball milled . . . . . . . . . . . . . . . .$94.99
65350
Inspection Covers
Fit 4-speed FX/FL models with forward
controls from 1965 thru 1986, and
Softail® or Dyna Wide Glide®
models from 1984 to present.
65350 Smooth . . . . . . . . . . . . . . . . . . .$54.99
65351 Ball milled . . . . . . . . . . . . . . . .$54.99
‘Inferno®’ Point Covers
• Chrome-plated die-cast construction
• Decorative slots – can be painted to match bike
• Unique “hidden mounting bolts” means no unsightly
hardware visible when installed
• Includes gasket and hardware
• Matches other ‘Inferno’ items
27487 Fits all models from 1970 thru 2003 (except Twin
Cam 88® models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.99
Point Covers
Fit all models from 1970 thru 2003
(except Twin Cam 88® models) not
shown
65346 Smooth . . . . . . . . . . . . . . . . . . .$42.99
65347 Ball milled (horizontal mounting
holes) . . . . . . . . . . . . . . . . . . . . .$42.99
Fit all Twin Cam 88® models from 1999
to present
65453 Smooth . . . . . . . . . . . . . . . . . . .$42.99
65454 Ball milled . . . . . . . . . . . . . . . .$42.99
FRAMES
FORKS
& SHOCKS
SHEETMETAL
GAUGES
CHEMICALS
GENERAL
Note: For additional selections of Derby and
Inspection Covers — see Section 12 “Driveline”
WWW.CUSTOMCHROME.COM
9.71
CROSS
REFERENCE
TAPPETS
Fueling
Raised Solid Lifters
for Twin Cam 88® Engines
ENGINE
9
• Lightweight solid lifters that are taller
to allow use of shorter pushrods,
optimizing valvetrain stability, increasing
engine RPM, horsepower and torque output
• Made from 8620 steel with a hardened surface and held
to aerospace tolerances
• Designed to exceed the needs of performance engines
running high RPM using large lift camshafts and higher
spring pressures, while maintaining proper and critical oil
flow to valves, springs, rockers, shafts and valve guides
• Maintain maximum valve lift and decrease valve float
• Designed to work in conjunction with the Feuling
oil pumps
• CNC-machined, precision ground and pressure tested
• Made in the USA
• Require the use of Feuling ‘Shorty’ adjustable pushrods
(CC #622148)
622147 Lifters ONLY (set of four) . . . . . . . . . . . . . . . . . $299.99
622148 ‘Shorty’ pushrods (set of four) . . . . . . . . . . . . $244.99
Fueling Race Series Hydraulic Lifters
Fit Twin Cam 88® engines from 1999 thru 2007 and Sportster® and Buell® engines
from 2000 thru 2007. Sold in sets of four.
• Optimize valvetrain stability, increase engine RPM, horsepower and torque output
• Decrease valve float
• Made from 8620 steel with a hardened surface and held to aerospace tolerances
• Designed to exceed the needs of performance engines running high RPM using
large lift camshafts and higher spring pressures, while maintaining proper and
critical oil flow to valves, springs, rockers, shafts & valve guides
• Maintain maximum valve lift
• CNC-machined, precision ground and pressure tested
• Recommended for both strip and high performance street engines
• Made in the USA
622160 Standard diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $285.99
622161 0.001" oversized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $299.99
622162 0.0015" oversized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $299.99
S&S High Performance Tappets for
Twin Cam 88® Engines
These tappets are standard equipment in the new S&S 124"
engines, and are a good choice for any stock or high-performance application. Whether you have a stock 88 incher or the
most outrageous big inch engine with a radical cam and spring
combination, these S&S tappets are built to take it. Includes the
HL2T Limited Travel Kit for improved cold starts and high rpm
valve timing accuracy. Fits all Twin Cam 88® engines from 1999
to present.
601729 Tappets (set of 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99
Note: Requires the use of adjustable pushrods.
9.72
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
TAPPETS
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
Standard
Big Axle
JIMS® ‘Big Axle’
Powerglide™ Tappets
All-new design improves tappet reliability by eliminating the inner bearing race.
Simplifying the design of the tappet increases
the wall thickness of the roller by 27%, and
provides a 36% increase in the size of the
tappet axle. The result is a tappet with twice
the strength and stability of the stock design.
Sold each.
For Evolution® Big Twin Models from
1984 thru 1999 and Evolution® Sportster®
and Buell® Models from 1986 thru 1990
Hydraulic tappets compatible with the
Original Equipment tappet blocks.
20732
Standard (repl. OEM 18523-86) $79.99
20733
.005" oversize . . . . . . . . . . . . . . . . $79.99
Solid tappets compatible with the OEM tappet
blocks. Must use adjustable pushrods.
22352
Standard. . . . . . . . . . . . . . . . . . . . . $74.99
JIMS® ‘Powerglide™’
Hydraulic Tappets
RevTech® Hydraulic Tappets
Designed for high-performance. Won’t collapse at high RPM. The performance of a solid
lifter combined with full compensation for
heat expansion. These tappets are coated with
a special dicronite DL-5 coating, and hand-fitted to achieve a running fit of .0002" to eliminate hydraulic tappet collapse.
For Late Evolution® Sportster® Motors
Hydraulic tappets compatible with the
Original Equipment tappet blocks on 5-speed
Evolution® Sportster® and Buell® models from
1991 thru 1999.
20739 Standard .9035" O.D.
(sold each) . . . . . . . . . . . . . . . . . . . . . $82.99
For Twin Cam 88® Models from 1999 to
Present, and Sportster® and Buell® Models
from 2000 to Present
22351 Standard .8425" O.D.
(sold each) . . . . . . . . . . . . . . . . . . . . . $94.99
Solid adjustable tappets compatible with
the Original Equipment tappet blocks on
Panheads and Shovelheads from 1948 thru
1984.
20580
Standard (repl. OEM 18492-48) $69.99
Hydraulic tappets compatible with Original
Equipment tappet blocks and cases with oil
passages to tappet blocks on Panhead and
Shovelhead motors from 1953 thru 1984. Must
be used in conjunction with JIMS® Pro-Lite
Pushrods ONLY (CC #20928).
20586
Standard. . . . . . . . . . . . . . . . . . . . . $94.99
20585
.005" oversize . . . . . . . . . . . . . . . . $94.99
Note: Roller-to-tappet block clearance must be checked on
Panhead and Shovelhead motors with high-lift cams, and
must be used with OEM 17904-66 or equivalent pushrods.
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
010551
DRIVELINE
JIMS® Hydrosolid Tappets
For Early Sportster® Models
Solid tappets compatible with the Original
Equipment tappet blocks on Sportster® models
from 1957 thru 1985.
20581
Standard. . . . . . . . . . . . . . . . . . . . . $69.99
20582
.005" oversize . . . . . . . . . . . . . . . . $69.99
For Big Twins from 1948 thru 1984
Hydraulic tappets compatible with the
Original Equipment tappet blocks on
Panheads and Shovelheads from 1953 thru
1984.
20584
Standard (repl. OEM 18522-53) $61.99
20583
.005" oversize . . . . . . . . . . . . . . . . $61.99
The axle, roller and bearing have a unique
design that increases the durability and stability of the tappets. Perfect for high RPM applications. Fits Evolution® Big Twin models from
1984 thru 1999. Sold each.
59240 Replaces OEM 18523-86A . . . . . . . $31.99
010581
Motor Factory American Made
Tappet Assemblies
®
Top quality American made tappet assemblies available for Sportster®, Panhead and
Shovelhead models. Sold each.
Note: Adjusters and lock nuts sold separately.
010551
010552
010564
010581
010580
Std. for Sportster® models
from 1952 thru 1985 . . . . . . . . . $42.99
+.005" for Sportster® models
from 1952 thru 1985 . . . . . . . . . $42.99
+.005" for Panhead models
from 1948 thru 1952 . . . . . . . . . $45.99
Std. for Panhead and
Shovelhead models from 1953
thru 1984 (hydraulic) . . . . . . . . . $44.99
+.005" for Panhead and
Shovelhead models from 1953
thru 1984 (hydraulic) . . . . . . . . . $42.99
WWW.CUSTOMCHROME.COM
Safely add more horsepower to your higher
RPM levels with the simple installation of
Hydrosolids. Use with any cam be it solid or
hydraulic, and receive 3 to 6 more usable
horsepower from about 5600 RPM, to the
safest RPM level possible for your valve train.
Hydrosolids have a built in anti pump-up
device, so the tappets will not pump-up, preventing valve contact. Sold each.
For Evolution® Big Twin Models from
1984 thru 1999,-and Evolution® Sportster®
and Buell® Models from 1986 thru 1990
20845
Standard .8425" O.D.
(repl. OEM 18523-86) . . . . . . . . . $89.99
22348
+.002" oversize . . . . . . . . . . . . . . $89.99
For Twin Cam 88® Models from 1999 to
Present and Sportster® and Buell® Models
from 2000 thru 2003
22306
Standard .8425" O.D.
(repl. OEM 18538-99) . . . . . . . . . $99.99
For Sportster® Models from 1991 thru 1999
22307
Standard .9035" O.D.
(repl. OEM 18529-89) . . . . . . . . . $89.99
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
SHEETMETAL
GAUGES
CHEMICALS
GENERAL
9.73
CROSS
REFERENCE
TAPPETS . ROLLERS
Tappet Roller Kits
‘HP+ ’ Lifters for Twin Cam 88
Models by Feuling
™
®
High-flow, standard bore hydraulic roller lifters
provide increased oil flow to the top end.
Fit Twin Cam 88® engines from 1999 to present.
• CNC-machined and precision-ground
• Increases critical oil flow to valves, springs,
rockers, shafts and valve guides
• Cooler oil and reduced wear
• Extends life of top end valve gear
• Recommended for use with the Super
Pump™’ by Feuling
• Drop in replacement for stock lifters
• Dyno developed and track tested
600146 Set of 4 . . . . . . . . . . . . . . . . . . . . . $124.99
9
Motor Factory Hydraulic Unit
for Big Twins
®
A high quality hydraulic unit from the
Original Equipment manufacturer for 1953
thru 1984 Panheads and Shovelheads.
56149 Replaces OEM 17920-53A
(sold each) . . . . . . . . . . . . . . . . . . . . . $92.99
Replacement Hydraulic Unit
for Big Twins
Low priced alternative. Fits Panheads and
Shovelheads from 1953 thru 1984.
56140 Replaces OEM 17920-53A
(sold each) . . . . . . . . . . . . . . . . . . . . . $41.99
ENGINE
20053
20052
20088
Tappet Adjusting Screws and Nuts
20257
20256
Crane® Hydraulic Roller Tappets
Increase the performance of your valvetrain
with this new tappet design. Made from highstrength steel alloy that is precision-machined
on CNC equipment and heat-treated for
strength and wear-resistance. Components
are computer-matched and measured to tolerances of microns for more precise oil metering and improved oil control, permitting the
valvetrain to reliably perform up to 500 RPM
higher than stock tappets. Sold each.
20256 Fits Evolution® Big Twin models from
1984 thru 1999 and Sportster® models
from 1986 thru 1990. . . . . . . . . . . . $73.99
20257 Fits Evolution® Sportster® and Buell®
models from 1991 thru 1999 . . . . $26.99
9.74
Fits all OHV Big Twin models (except
Evolution® models) from 1936 thru 1984, and
Sportster® and K models from 1952 thru 1985.
Each kit includes axles. Sets of four.
20051 Replaces OEM 18534-29A . . . . . . . $37.99
24079 Replacement roller axles
(pack of 4) . . . . . . . . . . . . . . . . . . . . . . $6.69
Tappet Roller Kit by Crane®
High quality rollers and axles for stock
replacement on all Evolution® Big Twin
models and 1986 thru 1990 Sportster® models.
Includes tappet axles and rollers.
24570 Set of four . . . . . . . . . . . . . . . . . . . . . $65.99
20053 Screws. Fits OHV Big Twin models
(except Evolution® models) from 1936
thru 1984 (repl. OEM 18555-36) pack
of 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99
20052 Screws. Fits all Sportster® models from
1957 thru 1985 (repl. OEM 18554-57)
pack of 4. . . . . . . . . . . . . . . . . . . . . . . . $9.99
20088 Nuts. Fits all Sportster® models from
1957 thru 1985 and OHV Big Twins
(except Evolution® models) from 1938
thru 1984 (repl. OEM 18570-38) pack
of 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99
Hydraulic-to-Solid
Lifter Conversion
Kit
Converts hydraulic lifters
to solids and still uses the
factory pushrods. A very
easy and inexpensive way to
convert to solid lifters.
Set of four.
36108 Fits Big Twin models
from 1953 thru 1984
(except Evolution®
models) . . . . . . $19.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
S&S Hydraulic Lifter
Travel Limiter Kit
Designed to maximize the efficiency of the
stock hydraulic lifters in Evolution® Big Twin
and Sportster® engines. This simple yet effective kit limits the travel of the hydraulic unit
in high RPM situations, thereby, eliminating
potential engine damage due to high RPM
valve float. Under normal conditions they
allow the lifter to operate as designed, resulting in low valve train noise and nominal maintenance. In effect, this provides a solid lifter
for racing and hydraulic lifter for cruising.
Sets of 4.
Note: Requires use of adjustable pushrods.
45843 Fits Big Twin models from 1984-early
1985 (repl. OEM 18500-84) . . . . . . $19.99
45718 Fits Evolution® Big Twin and Sportster®
models from late 1985 thru 1999 $19.99
Please see cautionary information following page Ref.65
TAPPET BLOCKS
Tappet Blocks for Early Big Twins
These late style tappet blocks fit Big Twin
models from 1953 thru 1984. When fitted to
1953- early 1976 models with stock 1/4"-24
tapered screws, a conversion tappet block screw
set is required. Screws sold separately. Available
with black or chrome finish. Will also fit models
from 1948 thru 1953 without hydraulic lifters.
Sold in pairs. Note: Tappet blocks do not have
vent fitting found on some 1981-1982 models.
020020 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.99
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
Chrome Tappet Block Set
for Evolution® Big Twin Models
LIGHTING
Chrome-plated, aluminum tappet blocks for
all Evolution® Big Twin models 1984 thru 1999.
Includes eight chrome sockethead screws.
26173 Replaces OEMs 18540-83A,
18622-85A (rear) and 18542-83A,
18623-85A (front) . . . . . . . . . . . . . $159.99
20604
ELECTRICAL
EXHAUST
Chrome Lifter Blocks for Big Twins
20605
S&S Tappet Blocks
S&S tappet blocks are designed to be stronger, wear better and last longer than stock.
They’re cast from 356-T6 aluminum alloy and
given a burnished finish to match other S&S
engine components. Kits includes front and
rear tappet blocks, and hardware and gaskets.
45725 Fits all Evolution® Big Twin
models from 1984 thru 1999 . . . $184.99
JIMS® Billet Tappet Blocks
Polished billet tappet blocks are precisionmachined from 7075-T651 aluminum. Tappet
bores are held to centerline tolerance of .002"
and are perpendicular to the mounting flange
to within .0002". They will accommodate a
cam with .550" gross lift (.350" at the tappets), and may be easily modified for higher
lift cams. Sold in pairs.
For Evolution® Big Twin Models
from 1984 thru 1999
Replace OEMs 18540-83A and 18542-83A.
20754 Complete chrome kit (includes chrome
screws and gaskets) . . . . . . . . . . . $479.99
20753 Chrome tappet blocks ONLY . . . $479.99
20604 Polished tappet blocks ONLY . . . $379.99
For Panheads and Shovelheads
from 1953 thru 1984
Replace OEMs 18602-80A and 18603-80A.
20605 Polished tappet blocks ONLY . . . $379.99
Chrome lifter block set for Panhead and
Shovel-head Big Twins from 1953 thru 1984.
Complete with two sets of chrome-plated
sockethead capscrews, 1/4"-20 for models
from late 1976 thru 1984 and 1/4"-24 for
1953-early 1976 models.
26170 Complete set of lifter
blocks and screws . . . . . . . . . . . . . $124.99
25118 1/4"-24 socketheads for Big Twins
from 1953-early 1976 (set of 8) . . . $4.89
25119 1/4"-20 socketheads for Big Twins
from late 1976 thru 1984
(set of 8) . . . . . . . . . . . . . . . . . . . . . . . . $8.29
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
Tappet Guide
for Sportster® Models
Aluminum guide for all models 1957 thru
1985. Sold each.
20009 Replaces OEM 18607-57 . . . . . . . . $64.99
FORKS
& SHOCKS
SHEETMETAL
Note: It is recommended that you use OEM 18522-53 tappets
(or equivalent) with CC #20605.
GAUGES
Tappet Block Screw Sets
Replace your worn screws with a new chromeplated set that replaces the originals perfectly.
Packs of 8.
93148 1/4"-24 12 6-point countersunk
heads for Big Twins from
1953-early 1976 . . . . . . . . . . . . . . . . . $8.99
93149 1/4"-20 12-point heads for Big
Twins from late 1976 thru 1999 . . $8.99
CHEMICALS
GENERAL
WWW.CUSTOMCHROME.COM
9.75
CROSS
REFERENCE
TAPPET BLOCK COVERS . ACCESSORIES
Tappet Block Covers for Evolution®
U.S. Des. Pat. #344,274
These die-cast tappet block covers have been
re-designed to completely cover the original
block mounting bolts for a custom look.
Installation is easy with supplied silicone
adhesive and does not require tappet block
removal. Fits Evolution® Big Twin models from
1984 thru 1999.
020028 Sold in pairs . . . . . . . . . . . . . . . . . $55.99
Chrome Tappet Block Cover Sets
for Evolution® Big Twin Models
ENGINE
9
Dome Lifter Block Bolt Covers
These unique covers are available in stamped
steel and die-cast versions that fit over the
Original Equipment tappet blocks like a
second layer of skin, maintaining the stock
appearance. Each cover has a hidden slot in
the back permitting it to be installed without
removing your pushrods. Just lift the pushrod
tube covers and slip them on. They’re held in
place with silicone adhesive which is provided.
Four 12-point chrome screws are included to
replace the four zinc-plated Original Equipment screws which protrude slightly thru
the holes in the fronts of the covers. Fits all
Evolution® Big Twin models from 1984 thru
1999
26172 Stamped steel set (shown) . . . . . . $28.99
26171 Die-cast set. . . . . . . . . . . . . . . . . . . . . $30.99
Chrome Tappet Block Covers
for Shovelhead Models
Fit over the Original Equipment tappet blocks
like a second layer of skin. Each cover has a
hidden slot in the back which permits it to be
installed without removing your pushrods.
Just lift the pushrod tube covers and slip them
on. They’re held in place with silicone adhesive which is provided. Early and late-style
screws are included to replace the Original
Equipment screws. Fit all Shovelhead models
from 1966 thru 1984.
26178 Stamped steel set . . . . . . . . . . . . . . $44.99
Note: Will not fit late 1981-early 1982 models equipped with
the tappet blocks that had oil evacuation fittings.
Don't ignore the lifter blocks when going for
the full custom look. Set of eight covers install
in seconds with included silicon adhesive.
66004 Fits Big Twins from late 1976 thru 1999
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99
Tappet Guide Puller for Sportster® Models
Crankcase Tappet Oil Screens
Removes press-fit tappet guides from the crankcase after
tappet body adjusting screw is removed. Fits Sportster®
models from 1957 thru 1978.
20104 Replaces OEM
95724-57 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $36.99
These are the Original Equipment parts. Can be used in aftermarket applications as
well. Fits all Big Twin models from 1970 thru 1999 (except Twin Cam 88® models).
75585 Replaces OEM 24981-70
(pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.99
9.76
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
TAPPET KITS
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
V-Thunder™ Hydraulic Lifter Kits
Complete Cam Installation Kits
Permits installation of cams without removal of the rocker boxes or gas
tank. Kit includes: RevTech® adjustable aluminum pushrods, front and
rear tappet block gaskets, early and late Evolution® cam cover gaskets,
cam seal, inner Torrington cam bearing, pushrod o-rings, air-oil separator to update the cam cover breather tube and 1/4 ounce of assembly
lube. Fits Evolution® Big Twin models from 1984 thru 1999.
58587 Cam installation kit plus RevTech® high performance
tappets and chrome tappet blocks (shown) . . . . . . . . . . . . . . . $329.99
Made from premium-quality tool steel and precision-engineered to
provide solid lifter performance with hydraulic lifter convenience.
VelvaTouch™ design replaces the stock aluminum lifter blocks with ones
made of a tough cast iron alloy. Patented oiling system provides each
lifter with its own, independent oil supply and prevents the lifter from
improperly bleeding down as the stock lifter does. No noise, no vibration, no hassle – just quiet, precision performance. Lifter blocks have
show-quality chrome finish.
V-Thunder™ Pushrod Kits
Made from .049"-wall 4130 chromemoly steel and precision-machined
to exacting tolerances for the ultimate in reliability and performance.
Convenient adjustment system makes installation easy on just about
any Big Twin by eliminating the need to remove the rocker boxes.
Sets of four.
30146 Stock-length pushrod kit for Evolution® Big Twin
models from 1984 thru 1999 with stock lifter blocks. . . . . . . $139.99
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
JIMS® Big Axle Powerglide™ Polished Billet
Aluminum Tappet Block Kit
S&S Hydraulic Lifter Update Kit
for Shovelhead Engines
Upgrade your Shovelhead with a modern hydraulic valve train. These kits
include new and improved S&S tappets similar to those used in Evolution®
engines, tappet guides, gaskets, hardware, pushrod cover keepers, and
a set of Quickee pushrods. These kits require the use of one of the S&S
cams for Evolution® engines to complete the installation.
601811 Use with S&S Shovelhead roller rocker arms . . . . . . . . . . . . . . $789.99
601812 Use with stock Shovelhead rocker arms . . . . . . . . . . . . . . . . . . . $789.99
Panhead or Shovelhead engines can now have all the benefits of the
hydraulic tappets fitted to Evolution® engines eliminating the total oil
loss of the stock hydraulic units. Made of 7075-T651 aluminum rated
at 83,000 psi, twice as strong 6061-T6 aluminum. Capable of the highest rpm's engines can safely turn, at a valve lift of .700". Machined to
the center line of the cam and held to a tolerance of ±.002". Bores are
held ±.0002" perpendicular to the mounting flange. Includes front
and rear tappet blocks, 4 Big Axle Powerglide™ tappets, tappet block
gaskets and instructions.
20839 Fits Panhead and Shovelhead engines
from 1953 thru 1984. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $659.99
Tappet Block Screws (sets of 8)
93148 1/4"-24 12 point heads for Big Twins from 1953-early 1976 . . $8.99
93149 1/4"-20 countersunk heads for Big Twins from late
1976 thru 1998 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.99
WWW.CUSTOMCHROME.COM
9.77
SHEETMETAL
GAUGES
CHEMICALS
GENERAL
CROSS
REFERENCE
PUSHRODS
Crane Adjustable Pushrods
for Twin Cam 88® Models
and Evolution® Engines
Made from 3/8" aircraft grade seamless 4130
heat-treated chromemoly steel tubing for
stronger, lighter pushrods that resist ‘harmonic’ vibration. The adjuster optimizes pushrod
geometry, while the 3/8"-diameter eliminates
pushrod ‘rub’. Includes two intake and two
exhaust pushrods.
For Twin Cam 88® Models
24933 Fit all Twin Cam 88® engines with
stock hydraulic lifters from 1999
to present. . . . . . . . . . . . . . . . . . . . . . $94.99
ENGINE
9
For Evolution® Big Twin Models
24169 Fit Evolution® Big Twins with stock cylinders and hydraulic lifters from 1984
thru 1999 (repl. OEM 17900-87) . $94.99
24167 Fit all Evolution® Big Twins with
stroker cylinders and stock
hydraulic lifters . . . . . . . . . . . . . . . . $94.99
For Evolution® Sportster® Models
24162 Fit all Evolution® Sportster® models
with stock hydraulic lifters
1991 thru 2003 . . . . . . . . . . . . . . . . . $94.99
24168 Fit all Evolution® Sportster® models
with stock hydraulic lifters
1986 thru 1990 . . . . . . . . . . . . . . . . . $94.99
Crane ‘Time-Saver’
Adjustable Pushrods
for Twin Cam 88® Models
and Evolution® Big Twins
Crane Solid Tappet Conversion
Kit for Shovelheads
These 7/16"-diameter, aircraft-quality 4130
chromemoly adjustable pushrods permit quick
installation and removal without disassembling the engine because they have a full 2"
of adjustment. The adjusting ends are 9mm
in diameter (.354"), which is 40% larger than
1/4" adjusting ends. Set of four.
24574 Fits Twin Cam 88® models
from 1999 to present . . . . . . . . . . $179.99
24161 Fits all Evolution® Big Twin hydraulic and mechanical lifters, and all
Shovelhead mechanical lifters. . $179.99
Converts hydraulic tappets to mechanical
operation. Kit includes 3/8" chromemoly pushrods that reduce the pushrod angle, and a
pushrod seat and plug that prevents oil from
entering the hollow hydraulic tappet body for
a 25% weight savings over stock.
24180 Fits stock Shovelheads from
1966 thru 1984 . . . . . . . . . . . . . . . . $139.99
24182 Fits Shovelheads with stroker
cylinders from 1966 thru 1984 . $139.99
24170 Replacement pushrod set
for CC #24180 . . . . . . . . . . . . . . . . . . $94.99
Crane® Hydraulic Kits for Shovelheads
Crane® Performance Solid Tappet Kits for Shovelheads
Replaces the stock hydraulic lifters on all Shovelhead motors with a performance kit
consisting of solid lifters and adjustable pushrods. The tappet bodies feature relocated pushrod seat heights, resulting in improved valve train geometry, reduced tappet
block wear and a weight savings (when combined with the pushrods of 33% over the
stock components). Includes a set of 3/8" adjustable pushrods made from seamless
4130 chromemoly steel tubing, heat-treated to 128,000psi tensile strength.
24179 Fits stock Shovelheads from 1966 thru 1984. . . . . . . . . . . . . . . . . . . . . . . . . . . . $249.99
24183 Fits Shovelheads with .005" oversize tappets from 1966 thru 1984 . . . . . . $249.99
24184 Fits Shovelheads with stroker cylinders from 1966 thru 1984 . . . . . . . . . . . . $249.99
9.78
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
These heat treated steel tappet bodies feature relocated
pushrod seat heights, resulting in a weight savings of up
to 33% less than stock and improved valve train geometry
to reduce tappet block wear. Each kit includes a matched
set of 4 roller tappet assemblies with hydraulic units
and Crane’s adjustable chromemoly steel pushrods to
assure outstanding performance and durability. Fits stock
Shovelhead engines from 1966 thru 1984.
010539 Stock tappets and pushrods. . . . . . . . . . . . . . . $544.99
Please see cautionary information following page Ref.65
PUSHRODS
INDEX
APPAREL
SEATS
& BAGS
24577
FOOT
CONTROLS
HAND
CONTROLS
S&S Adjustable Pushrod Kits
24578
S&S Adjustable pushrods are made from 7/16" chromemoly steel tubing. This combination provides maximum strength and durability
regardless of the extent of performance modifications. Kits include four
adjustable pushrods. Can be used in place of stock non-adjustable pushrods with either hydraulic or solid tappets.
45744 Fits Evolution® Big Twin models from 1984 thru 1999. . . . . . $99.99
45740 Fits Evolution® Sportster® models from 1991 thru 2003 . . . . $99.99
45742 Fits Evolution® Sportster® models from 1986 thru 1990 . . . . $99.99
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
24576
24575
ENGINE
Andrews ‘EZ-Install’ Adjustable Pushrod Kits
GASKETS
Include four adjustable pushrods that are available in either 6061-T6
anodized aluminum or 4130 chromemoly steel. They can be installed in
an engine without removing fuel tanks or rocker boxes.
Sold in sets of 4.
TRANNY
& CLUTCH
Note: May require stock pushrods to be cut out with hacksaw or bolt cutters so fuel tanks and
rocker boxes do not have to be removed.
For Twin Cam 88® Models from 1999 to Present
24578 Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $164.99
24577 Chromemoly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $165.99
DRIVELINE
For Evolution® Big Twin Models from 1984 thru 1999
24575 Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
24576 Chromemoly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $164.99
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
S&S Adjustable Pushrods for Twin Cam 88 Models
®
Andrews Adjustable Pushrods
for Evolution® Engines
The aluminum pushrods are lighter and quieter while the chromemoly
pushrods are more rigid and provide more strength. All pushrods are
the same diameter as stock and fit all Evolution® Big Twin and Sportster®
models from 1984 thru 2003.
For Big Twins from 1984 thru 1999
24249 Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $89.99
24339 Chromemoly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $97.99
Manufactured from rigid chromemoly steel tubing. Permits a simple,
trouble-free installation that does not require removal of the gas tank
or rocker assemblies. Stock pushrods may be cut to permit removal
without rocker disassembly. Retainer clips and upper pushrod covers
have been designed to provide a more stable, rigid cover assembly. Kit
includes pushrods, required gaskets, O-rings and replacement pushrod
covers and retainer clips. For stock height Twin Cam 88® engines.
46754 Complete pushrod kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $209.99
GAUGES
CHEMICALS
GENERAL
For 5-Speed Sportster® and Buell® Models from 1991 thru 2003
24595 Chromemoly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $82.99
WWW.CUSTOMCHROME.COM
SHEETMETAL
9.79
CROSS
REFERENCE
PUSHRODS
22312
S&S Quickee Pushrods
ENGINE
9
S&S developed a pushrod with a new adjuster
for use with S&S Shovelhead tappet guides.
It turned out to be such a cool idea that
it is now available for Twin Cam 88® and
Evolution® engines. The threaded adjuster
screws into the pushrod until the threads
disengage and the adjuster simply slides into
the pushrod making installation or removal
a snap. Once the pushrod is installed and
adjusted, the lock nut prevents the adjuster
from moving. The ball ends of the pushrods
are drilled so that oil can flow through them.
This is the stock oiling system for Evolution®
and Twin Cam 88® engines, but this allows
Shovelhead engines to be set up with 1984
and later top end oiling, via the pushrods,
provided S&S Shovelhead tappet guides and
roller rocker arms are
also used.
601753 Fits Twin Cam 88® engines up to
124" from 1999 to present. . . $189.99
601751 Fits Shovelheads up to 103" with
updated S&S valve train components from 1966 thru 1984 . . $189.99
601757 Fits Shovelheads up to 103" with
stock rocker arms from 1966 thru
1984 . . . . . . . . . . . . . . . . . . . . . . . . $209.99
601752 Fits Evolution® Big Twin engines up
to 98" from 1984 thru 1999, and
124" S&S engines . . . . . . . . . . . $189.99
601755 Fits 103" Evolution® Big Twin
engines from 1984 thru 1999, and
103" Evolution® Sportster® engines
from 1986 thru 1990 . . . . . . . . $189.99
601756 Fits 103" Evolution® Sportster®
engines from 1991 to present
20928
JIMS® Pro-Lite Worksaver Pushrod Kits
These adjustable pushrods are strong, light, and made from heat-treated aluminum with heattreated steel ends. No disassembly of the top end, or removal of the cam is required. These are
among the lightest pushrods on the market, weighing in at about .67 grams for Twin Cam 88®
models and .73 grams for Evolution® models. They work with stock or custom pushrod tubes and
with cylinders up to .200"- taller than stock.
22312 Fits Twin Cam 88® models from 1999 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$209.99
20929 Fits Evolution® Big Twin models from 1984 thru 1999. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$209.99
JIMS® Pro-Lite Upgrade for Shovelhead Models
Now all Shovelhead riders, using JIMS® “Powerglide™” big axle tappets, (CC #’s 20585 and 20586
ONLY) can upgrade to the latest design improvements. Use in stock or performance applications.
Kit includes four new 3/8"-diameter pushrod seats to make the Powerglide tappets 5/8" shorter,
and four new Pro-Lite Worksavers Shovelhead Pushrods.
20928 Fits Shovelhead models from 1966 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$209.99
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $189.99
601754
601758
Fits Evolution® Sportster® engines up
to 89" from 1986 thru 1990 . . $189.99
Fits Evolution® Sportster® engines up
to 89" from 1991 to present . $189.99
Note: These pushrods may not be used with solid tappets.
Replacement Pushrod Sets
Adjustable Hydraulic Lifter
Conversion Kit
36032 Fits Panheads from
1953 thru 1965 . . . . . . . . . . . . . . . . . $29.99
36031 Fits Shovelheads from
1966 thru 1984 . . . . . . . . . . . . . . . . . $36.99
Kit will correct all problems associated with
hydraulic lifters and reduce valve train weight.
36034 Fits Panheads from
1953 thru 1965 . . . . . . . . . . . . . . . . . $39.99
36033 Fits Shovelheads from
1966 thru 1984 . . . . . . . . . . . . . . . . . $42.99
9.80
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
PUSHRODS
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Hi-Performance Solid Lifter Kits
Taper-Lite™ Pushrods
for Evolution® Engines
Rivera Engineering designed these tapered
pushrods to use a 3/8"-40 aircraft-quality
adjuster which dramatically increases shear
strength. The pushrods are manufactured
from heat-treated 4130 steel, and have hardened ball ends. Installation is accomplished
without removal of the gas tank, rocker boxes
or camshaft cover.
25113 Fits all Evolution® Big Twin models
from 1984 thru 1999. . . . . . . . . . . $169.99
‘Easy Install’ Adjustable Pushrod
High-performance 7/16"-diameter 4130
chromemoly adjustable pushrods. They have
2" of adjustment for quick installation and
removal without engine disassembly, and
have 9mm (.354") adjusting ends that are 40%
larger than most adjustable pushrods.
Set of four.
25117 Fit Evolution® Big Twins with
hydraulic or mechanical lifters,
and Shovelhead Big Twins
with mechanical lifters . . . . . . . . $149.99
These kits install the adjusters into the lifter
bodies in a manner which increases the stability of the pushrods at greater angles. The
standard kit includes 1/2"-diameter 6061-T6
aluminum pushrods, while the deluxe kit features pushrods made of 7/16"-diameter 4130
seamless chromemoly tubing. The pushrods
are long enough for engines with stroker cylinders, and all wear surfaces are hardened for
durability. Fits Shovelhead motors from 1966
thru 1984.
24050 Complete kit with 7/16"
chromemoly pushrods . . . . . . . . . . $54.99
24051 Complete kit with 1/2"
aluminum pushrods . . . . . . . . . . . . $39.99
24052 Replacement 5/16"-32 split nuts
for the above kits (pack of 10) . . $10.99
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
FORKS
& SHOCKS
SHEETMETAL
GAUGES
RevTech II® Adjustable Pushrods
Install or remove pushrods without removing valve covers and rockers. Available in lightweight,
high-strength aircraft-quality aluminum or even higher-strength chromemoly for engines with heavy
valve springs. Laser-etched index markings and 21/4"-long, 36 thread-per-inch adjustable tips permit
precise micro-adjustments for maximum performance and accurate valvetrain geometry. Both sets
feature tapered shafts with chromemoly adjusters and hardened ends. Fits Evolution® Big Twins from
1984 thru 1999. Sets of four.
59221 Orange-anodized aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $114.99
59227 Black chromemoly steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99
WWW.CUSTOMCHROME.COM
9.81
CHEMICALS
GENERAL
CROSS
REFERENCE
PUSHROD COVERS
Buna-N® Rubber Pushrod Seals
Chrome Custom Pushrod Cover Kits
Fit all Evolution® Big Twin models from 1984 thru 1999.
37064 Complete kit with all pushrod tubes, washers, covers, clips and O-rings . . $61.99
Designed to replace old cork pushrod seals. Fits OHV models 1936-early 1979, and are unaffected by engine heat or
oil contamination, resulting in longer life and an improved
seal. Packs of 100.
12064 Small (repl. OEM 17955-36) . . . . . . . . . . . . . . . . . . $32.99
12065 Large (repl. OEM 17955-48) . . . . . . . . . . . . . . . . . . $35.99
9
ENGINE
010487
Blue Silicone Pushrod Seal Kit
010491
Complete Pushrod Cover Kits
Complete push rod cover sets include inner and outer pushrod covers, springs, spring cups,
retainers, washers, and seals.
010491 Fits Shovelhead models from 1966-early 1979 (cork seals) . . . . . . . . . . . . . . . . . . . . . . . . . .$86.99
010496 Fits Panhead models from 1948 thru 1965 (cork seals) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$70.99
010497 Fits Sportsters® models from 1957 thru 1985 (cork seals) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$70.99
010492 Fits Shovelhead models from late 1979 thru 1984 (O-ring/quad seals) . . . . . . . . . . . . . .$109.99
High tech blue silicone push rod seals resist
heat, seal better and last longer. Kit comes
complete with 4 large and 8 small seals,
enough to reseal any Big Twin engine 1948early 1979.
010487 Kit for one engine. . . . . . . . . . . . . $7.99
090955 Bag of 100 (small seals) . . . . . . . $44.99
090956 Bag of 100 (large seals) . . . . . . . $44.99
Skull Pushrod Tube Clips
by Skull Enterprises
Polished cast aluminum from hand carved mold.
Easily installs onto upper pushrod tubes. Sold each.
37731 Fits all Shovelhead and Evolution® Big
Twin models . . . . . . . . . . . . . . . . . . . . . . $21.99
37732 Fits all Panhead models, Ironhead
Sportster® models and Evolution®
Sportster® models . . . . . . . . . . . . . . . . . $21.99
Push Rod Collars
from Indian Larry Legacy
These polished Brass push rod collars have a
great vintage look, and were originally created as a collaboration between Indian Larry
and Silversmith Fin. Fit any Harley Davidson
OHV style engine 1936 & up. Comes as a four
piece set. A great look with our other
Brass products!
632987 Brass Push Rod Collars . . . . . . . $209.99
9.82
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
PUSHROD COVERS
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
Ness-Tech® ‘Radius’ Billet Pushrod Covers
Smooth contours and an elegant high-tech look are beautifully combined in this Ness® chrome-plated billet design. Uses Original Equipment
inner sleeves and springs for reliable sealing. Includes pushrod seals.
05872 Fits Evolution® Big Twin models from 1984 thru 1999. . . . . . . . $189.99
Ness-Tech® ‘Fat Rods’ Pushrod Tube Covers
ENGINE
•
•
•
•
GASKETS
Fattest pushrod covers in the industry
Look great with today’s big inch motors
Made from chrome-plated 11/4"-round billet aluminum bar stock
Uses the factory inner sleeves and springs to provide the best possible
sealing guaranteed availability of replacement parts
• Includes new seals.
• Set of four
04974 Fits all Twin Cam 88® engines from 1999 to present . . . . . . . $199.99
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
Custom Chrome Pushrod Cover kits
for Twin Cams
Features long pushrod clips for easy access
and removal. Kit includes pushrod tubes,
washers, cover clips and O-rings
637067 Pushrod Cover Kit . . . . . . . . . . . . . . . . . $68.99
FORKS
& SHOCKS
SHEETMETAL
GAUGES
CHEMICALS
GENERAL
WWW.CUSTOMCHROME.COM
9.83
CROSS
REFERENCE
REVTECH OIL PUMP
RevTech® Oil Pump Kits
Features include an improved oil pressure regulation system that ensures perfect oil
control to all areas of the motor, especially during initial start-up. All the oil line fittings
and mounting hardware are chrome-plated. The oil pump body and cover are highly
polished and have a redesigned smooth outer surface with counterbored holes for the
sockethead mounting hardware. The oil feed line can be routed to the stock location
at the top of the cover or directly to the pressure gears through a fitting located at the
bottom of the cover. Engines 1970 thru 1980 will require a small drilling operation, and
1970 thru 1972 engines will also need a plugging step. Each kit includes all the snap
rings, keys, gaskets, shaft, fittings, mounting hardware (1/4"-24 early-style and 1/4"-20
late-style) and detailed instructions.
20281 Fits all Evolution® Big Twin models from 1992 thru 1999 . . . . . . . . . . . . . . . . . . . $199.99
20275 Fits all Big Twin models from 1973 thru 1991 (except Dyna Glide models) . . $199.99
20276 Fits all Big Twin models from 1936 thru 1972 (except Flathead models) . . . . $199.99
Note: CC #’s 20275 and 20276 require CC #20840 (S&S oil pump drill fixture kit)
ENGINE
9
High-Performance by Custom Chrome®
ITEM#
PART#
QTY
DESCRIPTION
1
n/a
EA
1A
n/a
EA
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
n/a
54058
n/a
20233
20234
20235
20236
20029
20095
20237
20238
n/a
20240
54250
20241
EA
10
EA
EA
EA
EA
EA
EA
10
EA
EA
EA
EA
10
EA
Pump body, polished
1973 thru 1991
Pump body, polished
1936 thru 1967
Idler shaft
Pump body seal
Valve stop pin
Plug, 1/8"-27 NPTF
Elbow, 90°
Fitting, 3/8" hose
Fitting, front chain
Drive shaft
Drive shaft key
Drive gear – return
Idler gear – return
Drive gear – supply
Idler gear – supply
Retainer – outer
Spring – relief valve
9.84
REPL. OEM #
ITEM#
—
18
19
20
21
21
22
23
25
26
27
28
29
30
31
32
33
34
35
36
—
26327-68
26227-58
239
—
26338-68
63553-41
—
26346-70
26348-15
26315-68A
26317-68A
26328-74
26326-62A
26348-36
26207-83
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
PART#
QTY
DESCRIPTION
REPL. OEM
20242
19485
20243
20244
54270
54254
20261
20245
20246
20247
20248
092402
20251
20252
20253
20254
n/a
54000
20258
EA
10
EA
EA
10
10
EA
EA
5
EA
5
10
EA
2
4
2
4
10
5
Plunger – relief valve
O-ring
Cover screw
Spring – check valve
Spring – OEM pumps only
Ball – check valve
Gasket set
Adjusting screw
Lock nut, 10/32
Plug, 1/16"-27 NPTF
Plug, 10-32 x 1/4"
Washer, adjuster
Fitting, rear chain
1/4-20 x 11/4 chrome sockethead
1/4-20 x 21/2 chrome sockethead
1/4-24 x 11/4 chrome sockethead
1/4-24 x 21/2 chrome sockethead
Retainer, inner
1/4"-20 sockethead set screw
26400-82
11105
26263-80
26262-80
26363-36
8873
—
63614-72
7638
—
—
6156
—
—
—
—
—
11002
—
Please see cautionary information following page Ref.65
S . S . JIMS OIL PUMPS
INDEX
APPAREL
SEATS
& BAGS
JIMS® Billet Oil Pump Assembly with Custom Cover
Gives an increase in oil return (scavenge) volume over stock pumps,
increasing horsepower by decreasing drag on the flywheels and
other rotating parts. Matched feed and return gears provide
increased oil pressure, even at idle. Cover and body are polished billet 6061-T651 aluminum CNC-machined to exact tolerances for the
most durable, strong and wear resistant oil pumps.
20931 Fits all Big Twin models from 1973 thru 1991 . . . . . . . . . .$409.99
FOOT
CONTROLS
HAND
CONTROLS
Note: 1973 thru 1980 cases will require a simple drilling procedure for oil drain hole by
using JIMS® tool (CC #20859).
LIGHTING
ELECTRICAL
EXHAUST
S&S Billet Aluminum Oil
Pumps for Big Twins
CNC-machined to maintain close tolerances
and strict quality control, these billet oil
pumps all feature the same oiling pattern
as 1981 thru 1999 engines. This results in a
split oil path that applies more pressure to
the top end for longer component life. Each
pump features multiple oil ports for a variety of plumbing options. Kits include: billet
oil pump, supply and return gears, drive
shaft with keys and snap rings, check ball
and spring, pressure relief valve and spring,
check ball and relief valve cover screws with
O-rings, gaskets, fittings, and hardware. No
provision for rear chain oiling.
45827 Fits Big Twin models from 1936 thru
1972 . . . . . . . . . . . . . . . . . . . . . . . . $299.99
45811 Fits all Big Twin models from 1973
thru 1991 . . . . . . . . . . . . . . . . . . . $294.95
45810 Fits Evolution® Big Twin models
from 1992 thru 1999. . . . . . . . . $299.99
45775 Paper gasket kit for 1992 thru 1999
style pumps (except Twin Cam 88®
models) . . . . . . . . . . . . . . . . . . . . . . . $5.49
45766 Paper gasket kit for 1936 thru 1991
style pumps . . . . . . . . . . . . . . . . . . . $5.49
20840 Drill fixture for use on Big Twin
models from 1936 thru 1999 (except
Twin Cam 88® models) . . . . . . . . $45.99
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
Note: S&S Oil pumps on this page require the gasket kits
sold above. Not compatible with OEM style gaskets.
FORKS
& SHOCKS
SHEETMETAL
GAUGES
CHEMICALS
GENERAL
WWW.CUSTOMCHROME.COM
9.85
CROSS
REFERENCE
OIL PUMPS
JIMS® Oil Pumps with Stock Style Cover
and Replacement Parts
High quality, precision components are a JIMS hallmark. These billet oil
pumps and parts are no exception.
Oil Pump Assemblies
American-made, fully CNC-machined and polished billet oil pump assemblies.
22304 Fits Evolution® Big Twin models from 1992 thru 1999. . . . . . . . . . . $409.99
Oil Pump Replacement Parts
Precision cut and finished, then specially heat-treated to outlast the stock
part. Perfect replacements for the Original Equipment pieces on Big Twin
models (except Twin Cam 88® models) from 1973 thru 1999.
20933 24-tooth drive gear for Big Twin models from 1973 thru 1999
(repl. OEM 26345-73) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99
20029 Drive shaft (long) for Big Twin models from 1968 thru 1999
(repl. OEMs 26346-68, 26346-70) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15.99
20927 Pinion and pump key (repl. OEMs 26348-15, 26347-15) pack of 10 $9.99
ENGINE
9
S&S High Volume High Pressure
Billet Oil Pumps
The HVHP billet oil pump is a new, high-capacity pump
that was designed for S&S’s new SSW™ Plus engines that
have piston cooling oil jets. This extra flow capacity is an
upgrade recommended for all Evolution® engines (not recommended for Shovelheads).
• New tooth profile increases capacity
• Wider supply gears pump more capacity
• Wider return gears improves scavenging
601117 Fits Evolution® engines
from 1984 thru 1991 . . . . . . . . . . . . . . . . . . . . . $359.99
601118 Fits Evolution® engines
from 1992 thru 1999 . . . . . . . . . . . . . . . . . . . . . $299.99
Crankcase Tappet Oil Screens
These are the Original Equipment parts. Can be used in aftermarket
applications as well. Fits all Big Twin models from 1970 thru 1999
(except Twin Cam 88® models).
75585 Replaces OEM 24981-70 (pack of 5) . . . . . . . . . . . . . . . . . . . . $17.99
9.86
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
FUELING OIL PUMPS . OIL PUMP PARTS
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
Feuling ‘Super Pump™’ for Early
Twin Cam 88® Engines
The ultimate oil pump for Twin Cam 88
engines! It’s an absolute must for modified
engines and highly recommended for stock
applications.
• Aerospace design
• No wet sumping
• Cooler oil and more horsepower
• 40% more pressure volume and 60% more
scavenge volume
• High-flow 2" gerotor gears
• Bolts into stock oil pump location
600152 Fits all Twin Cam 88® engines
(except 2006 Dyna Glide models)
from 1999 thru 2006 . . . . . . . . $469.99
®
Fueling Race Pump for Early
Twin Cam 88® Engines
• Designed for the racer. Made with tighter
tolerances, harder 7075 billet aluminum
alloy, hard anodized and blueprinted
• The 7075 alloy holds tighter tolerances
under temperature
• 40% pressure volume and 60% scavenge
volume increase over stock
• Eliminates power robbing wet sumping,
blow-by and oily air cleaners
• Cooler oil and engine temperatures
• More horsepower, more torque, more oil
pressure
• When combined with the Feuling Camplate,
test results show a gain of three horsepower
and four ft/lbs of torque to the rear wheel,
while lowering engine temperature
• Recommended for both strip and performance street engines
• Made in the USA
622149 Fits all Twin Cam 88® engines
(except 2006 Dyna Glide models)
from 1999 thru 2006 . . . . . . . . $544.99
LIGHTING
Fueling Oil Pump for Late
Twin Cam 88® Engines
• Increases oil pressure
• Cooler oil and engine temperatures
• No more oily air cleaners
• 20% more pressure volume
• Eliminates blow by and wet sumping
• 30% more scavenge (return) volume
• More rear wheel horsepower and torque
• Stock replacement
622150 Fits 2006 Dyna Glide models, and all
2007 Big Twin models . . . . . . . $444.99
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
DRIVELINE
25207
WHEELS,
TIRES
& BRAKES
FRAMES
Chrome Oil Pump Plugs
for Big Twin Models
Chrome ‘Tight Spot’ Sockethead
Oil Pump Fitting by Rivera
No more custom wrenches, scraped knuckles,
damaged fitting edges or leaky oil pump
fittings!
• Uses a 5/16" sockethead wrench to tighten
or loosen
• Precision machined from solid brass
and show-chromed
• Replaces the 90º fitting on top of the oil
pump body
• Replaces Original Equipment 26338-68
667499 Fits Big Twin models from 1968
thru 1991 . . . . . . . . . . . . . . . . . . . . . $7.99
High Pressure Oil Pump Spring
by Crane
Installing high-performance valve train components can strain the Original Equipment oil
system. This spring increases oil pressure by
2 to 3 lbs. and is ideal for high-performance
applications. Made in the USA.
24572 Fits Big Twins from 1936
thru 1995 . . . . . . . . . . . . . . . . . . . . . . . $7.99
An assortment of chrome-plated sockethead
plugs for the oil pump on most OHV Big Twin
models from 1936 thru 1999. Plugs are complete with O-ring seals when required.
25206 Tappet screen, relief valve and check
valve plug set for Big Twins from
1970 thru 1980 . . . . . . . . . . . . . . . . . $22.99
25207 Tappet screen, relief valve and check
valve plug set for Big Twins from
1981 thru 1999 . . . . . . . . . . . . . . . . . $25.99
FORKS
& SHOCKS
SHEETMETAL
GAUGES
CHEMICALS
GENERAL
WWW.CUSTOMCHROME.COM
9.87
CROSS
REFERENCE
MOTOR MOUNTS
09473
09472
680010
09475
09474
9
09476
08985
ENGINE
09335
680021
09470
Heavy-Duty Billet Aluminum Top Motor Mounts by Yankee Engineuity
Highly polished American-made top motor mounts are CNC-machined from solid billet for strength and superior finish. The coil mount system is specifically designed to be used with other Yankee Engineuity parts and
accessories. Most of the motor mounts contain provisions for dual/single coil mount brackets for Accel, Crane,
Dyna, RevTech®, OEM or Nology™ coils (refer to applications chart for the entire coil mount assembly system).
09475
Fits all Evolution® engines (except S&S Super Sidewinder engines) when solidly mounted in 1986 thru
1999 Softail® or custom frames (has provisions for coil mounts and accessories) . . . . . . . . . . . . . . . . .$189.99
680010 Fits S&S Super Sidewinder engines when solidly mounted in 1986 thru 1999 Softail® or custom frames
(has provisions for coil mounts and accessories) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$209.99
08985
Fits all Evolution® engines when solidly mounted in 1986 thru 1999 Softail® or custom frames (no provisions for coil mounts and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$185.99
09470
Fits Softail® models from 2000 to 2006 and custom frames with solidly mounted Twin Cam 88® engines
(has provisions for coil mounts and accessories) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.99
09476
Fits Dyna Glide models from 1991 thru 1998, and custom rubber-mount frames with Evolution®
engines (has provisions for coil mounts and accessories) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.99
680021 Fits all Twin Cam® models with fuel injection from 1999 thru 2007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$172.72
09335
Fits Sportster® models from late 1984 to present (has provisions for coil mounts and accessories) $199.99
09472
Fits FXR models from 1986 thru 2000 and custom rubber-mount frames with Evolution® engines (has
provisions for coil mounts and accessories) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$179.99
09473
Fits Big Twin models from early 1948 thru 1984 (no provisions for coil mounts and accessories) . .$179.99
09474
Fits Big Twin models from early 1948 to 1984 (has provisions for coil mounts and accessories) . . . .$194.99
9.88
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
While these heavy-duty
motor mounts from
Yankee Engineuity can
be used by themselves,
they are most versatile
when used with the
wide range of YE coil
brackets and covers.
See the “Coil Mounting
System” matrix on the
facing page for more
information.
Please see cautionary information following page Ref.65
MOTOR MOUNTS . OIL PUMP COVERS
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
Chrome Billet Motor Mount
Top Motor Mount with Ignition Switch Mount by Jesse James WCC
This chrome billet aluminum motor mount is
nicely designed to fit the style of any custom
bike. It fits Softail® models 1984 to present
and some custom applications.
640742 Sold each . . . . . . . . . . . . . . . . . . . $135.99
Jesse and his crew are back in the parts game and have developed this top motor mount. It is
constructed from laser cut steel and has an ignition switch mount (switch sold separately CC
#12203). It is designed to fit most Twin Cam and Evo applications.
690402 Top Motor Mount, Raw Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.99
690403 Top Motor Mount, Satin Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$239.99
HAND
CONTROLS
LIGHTING
ELECTRICAL
13065
EXHAUST
INTAKE
13064
13066
ENGINE
Chrome Heavy-Duty
Motor Mounts
695033
Thicker than conventional one-piece welded
motor mounts (over 5/16" thick!). The cylinder
head and frame straps are held in place with
two oversize, heavy-duty bolts. Ideal for stock
or stroked motors. Fully machine-polished and
triple chrome-plated.
13064 Fits models WITHOUT choke or ignition switch on mount (repl. OEM
16852-87T) . . . . . . . . . . . . . . . . . . . . . $31.99
13065 Fits models WITH choke AND ignition
switch on mount (repl. OEM 6901887T) . . . . . . . . . . . . . . . . . . . . . . . . . . . $44.99
13066 Fits models with choke ONLY on
mount (repl. OEM 69013-87T) . . . $39.99
613062
Extended Top Motor Mounts for RevTech® Engines
GASKETS
TRANNY
& CLUTCH
DRIVELINE
WHEELS,
TIRES
& BRAKES
FRAMES
These mounts fit all RevTech100" 4x4 and 110" engines. They’re 1"-longer so you can fit FXR type
coil mounts on motors with larger cylinders and heads, and are made from 1/4"-thick plate steel
(33% thicker than stock) to deliver the ultimate in strength and style.
613062 Fits Softail® models from 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.99
695033 Fits all rubber mount applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99
FORKS
& SHOCKS
SHEETMETAL
GAUGES
31700
Chrome Oil Pump Covers for Big Twins
Designed to bolt-on to stock aluminum oil pumps and made from the finest materials available. Guaranteed to deliver unsurpassed styling and ease of installation. They
fit most Big Twin models 1968 thru 1999.
31503 Fits all Evolution® Big Twin models (except Dyna Glide models) without a fitting for the primary chain oiler 1968 thru 1991 . . . . . . . . . . . . . . . . . . . . . . . . . $24.99
31570 Fits all Big Twin models with a fitting for the primary chain oiler from 1968
thru 1991 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99
31700 Fits all Evolution® Big Twin models from 1992 thru 1999 . . . . . . . . . . . . . . . . . $19.99
WWW.CUSTOMCHROME.COM
CHEMICALS
GENERAL
9.89
CROSS
REFERENCE
MOTOR MOUNTS
25677
This part of
the coil and
bracket faces
inside
Chrome Front Motor Mounts
for Sportster® Models
Chrome duplicates of the Original Equipment
parts. Permit accessory footpeg mounting and
mount easily with the stock hardware.
13045 Fits alternator-equipped Sportster®
models from late 1984 thru 2003 $25.99
13052
Chrome Top Motor Mounts
Top motor mount and coil bracket combination replaces the stock mount so that you can
use late-model coils.
Mounts Without Switch Hole
13051 Fits all 4-speed Big Twin models from
1948 thru 1984 (except Evolution®
models) . . . . . . . . . . . . . . . . . . . . . . . . $23.99
13052 Fits all Sportster® models from 1957
thru 1985 (except 1979 thru 1981 and
XR models). . . . . . . . . . . . . . . . . . . . . $19.99
9
ENGINE
Mounts with Switch Hole
25677 Fits all 4-speed Big Twin models
from 1948 thru 1984 (except
Evolution® models) . . . . . . . . . . . . . $43.99
25676 Fits all Sportster® models from
1957 thru 1985 (except 1979
thru 1981 and XR models) . . . . . . $19.99
12289 Universal key switch . . . . . . . . . . . . $15.99
‘The Mount’ for Softail® Models
by Paul Yaffe Originals
Great looking upper motor mount compliments the natural shape of the V-Twin motor
while solving the problem of where to mount
your coil, run/off and start buttons. Handmade from 1/2"-thick steel plate and shipped
raw, ready for painting or plating.
06570 Fits all Twin Cam 88® Softail® models
from 2000 to present (coil not included) . . . . . . . . . . . . . . . . . . . . . . . . . . . $229.99
13068
13067
12804
Heavy-Duty Chrome Motor
Mounts for Softail®
and FXR Models
These mounts are made from 1/4"-thick plate
steel (33% thicker than stock) delivering the
ultimate in strength and style. They include
chrome choke/horn brackets. The mount for
Softail® models also includes chrome sockethead mounting hardware.
13067 Fits all Evolution® FXR models from
1984 thru 1994 . . . . . . . . . . . . . . . . . $31.99
13068 Fits all Softail® models from 1984 to
present . . . . . . . . . . . . . . . . . . . . . . . . $42.99
12804 Replacement choke cable bracket for
CC #13067 . . . . . . . . . . . . . . . . . . . . . . $4.99
Rear Mount for Sportster® Models
A quality replacement for 1967 thru 1981 XLH
and 1970 thru 1981 XLCH models
(repl. OEM 16203-67).
26611 Sold each . . . . . . . . . . . . . . . . . . . . . . $45.99
Top Motor Mount for
Sportster® Models
Fits Sportster® models 1957 thru 1985.
25185 Replaces OEMs 16250-57, 16251-58
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99
9.90
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
MOTOR MOUNTS
INDEX
APPAREL
16308
SEATS
& BAGS
FOOT
CONTROLS
30134
HAND
CONTROLS
Chrome Top Motor Mount for
Twin Cam 88® Softail® Models
This two-piece top motor mount is a direct
replacement for Twin Cam 88® Softail®
applications, and has a built in horn and
choke bracket.
613063 Fits all Twin Cam 88® Softail® models
from 2000 thru 2005 . . . . . . . . . $22.99
Velva Ride™
30131
Vibration
Control
System by V-Thunder™
Reduces transmitted engine vibration by up
to 50% and provides the comfort needed for
all-day rides.
Velva Ride™ Engine Stabilizers
Stainless steel body contains a stainless steel
plunger encased in specially-formulated urethane that significantly outperforms stock
stabilizers. When installed on rubber mount
models, the engine is completely isolated
from the frame by eliminating all metal-tometal contact. Complete with rod ends and
available with a plain finish or polished bodies
and rod ends. For all rubber-mounted 5-speed
models 1980 to present, and all Buell® models
1991 thru 2002. Replaces OEM 16219-79A.
LIGHTING
Motor Mount Stabilizer Link
by Landmark
Replaces the upper or lower link on all rubber-mounted 5-speed Big Twin models 1980 to
present and 1997 thru 2002 Buell® models. .
16308 Chrome-plated . . . . . . . . . . . . . . . . . $89.99
16309 Zinc-plated. . . . . . . . . . . . . . . . . . . . . $47.99
ELECTRICAL
EXHAUST
INTAKE
ENGINE
Sold in Pairs
30132 Natural finish . . . . . . . . . . . . . . . . . $199.99
30134 Polished . . . . . . . . . . . . . . . . . . . . . . $294.99
GASKETS
Sold Each
Replacement Motor Mounts
for Dyna Glide Models
These are Original Equipment parts. Use to
replace worn or cracked motor mounts to
keep vibration to a minimum. Direct replacement for the original parts. Fit Dyna Glide®
models from 1991 thru 2007.
13046 Front (repl. OEM 47583-90B) . . . $149.99
13047 Rear (repl. OEM 47564-90B) . . . . $149.99
30133 Natural finish . . . . . . . . . . . . . . . . . . $92.99
30135 Polished . . . . . . . . . . . . . . . . . . . . . . . $28.99
Velva Ride™ Motor Mount
Specially-designed urethane motor mount
will out-last and out-dampen the OEM part
by a substantial margin. Available with black
powder coat or highly-polished finishes for
all rubber-mounted 5-speed models (except
Dyna Glide models) 1980 to present and all
Buell® models 1991 thru 2002. Replaces OEM
16207-79B.
30130 Black powder coat. . . . . . . . . . . . . . $99.99
30131 Polished . . . . . . . . . . . . . . . . . . . . . . $125.99
TRANNY
& CLUTCH
Motor Mount Adaptor
for Twin Cam 88® Engines
DRIVELINE
Permits the installation of a Twin Cam 88®
engine into earlier style frames. It’s machined
from billet aluminum and installs to the rear
engine mount. Includes instructions and
mounting hardware.
36995 Complete kit . . . . . . . . . . . . . . . . . . $144.99
FRAMES
Note: Does work with counterbalanced Twin Cam 88®
engines ("B" engines)
FORKS
& SHOCKS
Motor Mount
Stabilizer Link
5-Speed
Front Motor Mount
A replacement front motor mount for all
rubber-mounted 5-speed models from 1980
thru 2007 (except Dyna Glide models).
13055 Replaces OEM 16207-79B . . . . . . . $24.99
These is an Original
Equipment part. Fits
the upper and lower
mount on FLT 1980
to present, FXR 1982
thru 1994 and FXD
models 1991 to present. May also be used
for aftermarket or
custom applications
that require OEM stabilizer link.
13048 Replaces OEM
16258-95A
. . . . . . . . $55.99
WWW.CUSTOMCHROME.COM
WHEELS,
TIRES
& BRAKES
SHEETMETAL
GAUGES
CHEMICALS
Chrome 5-Speed Motor Mount
Fits all rubber mounted 5-speed models 1980
to present (except Dyna Glide models).
95013 Replaces OEM 47159-79TA . . . . . . $35.99
9.91
GENERAL
CROSS
REFERENCE
MOTOR MOUNT PARTS . CRANKCASE BREATHERS
Stainless Steel Engine Skid Plate
Highly-polished part that fits 4-speed Big Twin models from 1965 thru
1984 (except Evolution® models).
17115 Replaces OEM 24490-36T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.99
Top Motor Mount Spacer Kits
Don’t forget to space that top motor mount properly after you widened the
driveline. Each of these kits includes the required hardware and the spacer
listed below.
38061 Raw steel 3/8"-thick spacer kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99
38062 Raw steel 5/8"-thick spacer kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99
38060 Raw steel 1"-thick spacer kit (for 200 to 230-series tires) . . . . $19.99
9
ENGINE
12017
12012
Crankcase Breather Filters
Slotted Crankcase Filter Kit
Chrome Billet Front Motor Mount
Stabilizer for Dyna Glide Models
Helps control fore and aft engine movement.
Mounts to front motor mount on all Dyna
Glide models from 1991 to present.
42689 Motor mount stabilizer . . . . . . . . $144.99
9.92
Our slotted filter housing looks great and provides rigidity so the element doesn’t distort
or collapse with age. The gauze filter medium
cleans up easily with soap and water and
helps keep foreign material out of the bottom
end. Ideal for custom builders or air cleaner
installations that don’t have breather fittings.
Complete with chrome mounting bracket and
hose clamp. Fits all models with 3/8" crankcase
breather hose.
020565 Slotted filter kit . . . . . . . . . . . . . . $18.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Prevent the breather hose from inhaling
impurities into the lower end while quieting
the system. Beneficial on 1975-up models
when the stock air cleaner has been replaced.
Measure approximately 2" in diameter and
11/2"-tall with steel baseplates and 3/8"-I.D.
hose barbs. Sold each.
12017 Single inlet. . . . . . . . . . . . . . . . . . . . . $15.99
12012 Dual inlet . . . . . . . . . . . . . . . . . . . . . . $13.99
Please see cautionary information following page Ref.65
CRANKCASE BREATHERS
INDEX
APPAREL
SEATS
& BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Uni Filter Crankcase Breathers
®
Provides breather filtration when the factory
air cleaner is removed. Fits all models 1975 to
present. Includes hose clamps and zip ties.
12014 Dual 3/8" inlets for mounting
between cylinders . . . . . . . . . . . . . . $14.99
ELECTRICAL
EXHAUST
Inline PowerVent Crankcase Ventilation System by Doherty
• PowerVents are designed around a fast-sealing one way valve that prevents air from being
sucked back up into the crankcase on the upstroke of the piston.
• Stops rocker box and base gasket oil leaks caused by excessive crankcase pressure
• Increases horsepower, improves throttle response
• Universal inline kit comes with all hardware needed to install PowerVent into breather hose.
• Quality billet aluminum construction
• 100% made in the USA
020640 Fits all models with 3/8" crankcase breather hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99
INTAKE
ENGINE
GASKETS
TRANNY
& CLUTCH
Uni Filter® Crankcase Breathers
12152
Feature a ‘ziptie loop’ for attaching them to
the frame, eliminating loose hoses. The washable urethane material requires no oil or special cleaners, and can be washed in soap and
water for years of service.
11966 Fits 5/16" I.D. hose. . . . . . . . . . . . . . $14.99
11967 Fits 3/8" I.D. hose . . . . . . . . . . . . . . . $14.99
DRIVELINE
12121
WHEELS,
TIRES
& BRAKES
FRAMES
Krankvent Crankcase Pressure
Control Valves
Hayden Crankcase Pressure
Relief Valve
Tom Hayden, inventor of the M6 Primary
Chain Tensioner, has turned his engineering
skill to controlling excess crankcase pressure.
The result is an ultra-compact design that
utilizes a calibrated umbrella valve to reduce
crankcase pressure and increase power.
12239 Fits Evolution® Big Twin and
Sportster® models vented
through the crankcase . . . . . . . . . $109.99
Evolution® engines have unique venting
problems because of small crankcase volume
and a relatively long stroke. The Krankvent
solves venting problems using high-tech
materials combined with innovative design
that improves performance and significantly
reduces the build-up of pressure that can
cause oil leaks and seepage at gasket joints
particularly in the top end. Easily installed on
all models.
12121 With mounting tab . . . . . . . . . . . . $119.99
12152 Without mounting tab . . . . . . . . $119.99
FORKS
& SHOCKS
SHEETMETAL
GAUGES
CHEMICALS
GENERAL
WWW.CUSTOMCHROME.COM
9.93
CROSS
REFERENCE
CRANKCASE BREATHERS
Spyke ‘Stealth’ Krankvents
Tired of oil on your pant leg or in your air
cleaner? Vent your frustrations with the
Krankvent from Spyke. It installs almost invisibly in minutes and effectively controls the
messy by-products of all that oily huffing and
puffing as the crankcase breathes.
28840 Fits late model “head breather” Big
Twin models (except Twin Cam 88®
models) with S&S cylinder heads . . .$89.99
28842 Kit includes two Krankvent breather
bolts to replace stock bolts on Sportster®
models from 1991 thru 2003. Works
with stock and aftermarket
air cleaners . . . . . . . . . . . . . . . . . . . . . .$109.99
28843 Kit includes two Krankvents and is
designed to install in the stock air
cleaner on Evolution™ Big Twin
models from 1992 thru 1999 . . . . . .$109.99
28844 Kit with crankcase adapter for Big
Twin models from 1984 thru 1991 . .$89.99
28840
28842
28843
28844
9
ENGINE
‘No-Return’ Crankcase
Breather Assemblies
27515
Special No Return Valve
Special no-return valve improves performance and significantly reduces
the build up of pressure that can
cause oil leaks and seepage at gasket
joints. Complete with a one-piece
filter molded to a lightweight decorative end cap, a chrome zinc die-cast
mounting base with 5/16" inlet
and hose clamp. Fits Big Twin and
Sportster® models from 1975 to present when the stock breather hose has
been re-routed.
27515 Breather kit . . . . . . . . . . . $29.99
Breather Tube Oil Collector
Keeps the filter for the breather hose from
getting oil soaked by oil carried over from the
engine and eliminates oil drips
from the end of the breather
hose. The chrome canister is
divided into two chambers,
allowing the oil to settle out
before the crankcase air is expelled
through the filter. Canister is chromed aluminum, bracket is chromed steel. Includes a long
life K&N filter. Fits 3/8" breather hose.
020629 Chrome finish . . . . . . . . . . . . . . . . . $159.99
020630 Polished finish . . . . . . . . . . . . . . . . $134.99
9.94
Faceted Crankcase
Breather Assembly
Comes complete with a one-piece
filter molded to a lightweight
decorative end cap, a chrome
zinc die-cast mounting base with
5/16" inlet and a hose clamp. The
hose clamp holds the filter to
the base when the vent hose is
installed. Installs in minutes and
is the perfect mate to our faceted
gas caps and oil tank plugs.
12018 Complete assembly $15.99
12029 Replacement
filter only . . . . . . . . . . $9.99
Chrome Crankcase
Breather
Features a bolt for attaching
to any flat surface. Prevents
breather hose from inhaling any
impurities while riding.
Fits 3/8" hose.
12016 Sold each . . . . . . . . . $19.99
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
Please see cautionary information following page Ref.65
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement