Manual for OBD II Automotive Fault Code Reader

Manual for OBD II Automotive Fault Code Reader
DIAGNOSTIC SCAN TOOL CAN OBDII
Item Number W2977
OWNER’S MANUAL
WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product. The
owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and
while in use, maintaining the unit in good working order. If the owner and/or operator are not fluent in English,
the product warnings and instructions shall be read and discussed with the operators’ native language by the
purchaser/owner or his designee. Make sure that the operator comprehends its contents. Safety information
shall be emphasized and understood prior to usage. The product shall be inspected per the operating
instructions.
Users of this product must fully understand these instructions. Each person operating this product must also
be of sound mind and body and must not be under the influence of any substance that might impair their
vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
TABLE OF CONTENTS
Safety Precautions and Warnings........................................3
General Information .............................................................4
On-Board-Diagnostics (OBD) II .........................................4
Diagnostic Trouble Codes (DTCs) .....................................4
Location of the Data Link Connector (DLC)........................5
OBD II Readiness Monitors ................................................5
OBD II Monitor Readiness Status ......................................6
OBD II Terminology ............................................................7
Product Information ..............................................................8
Tool Description...................................................................8
Product Specifications.........................................................9
Product Features ................................................................9
Vehicle Coverage ...............................................................10
Operating Instructions..........................................................11
Reading Codes ..................................................................11
Erasing Codes ...................................................................14
Retrieving I/M Readiness Status........................................15
Viewing VIN Number..........................................................17
Rescanning Data ...............................................................18
Diagnostic Trouble Code (DTC) Definitions..........................19
Limited One Year Warranty..................................................48
2
SAFETY PRECAUTIONS AND WARNINGS
To prevent personal injury or damage to vehicles and/or the
Scan Tool, read this instruction manual first and observe the
following safety precautions at a minimum whenever working
on a vehicle:
• Always perform automotive testing in a safe environment.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc, away from all
moving or hot engine parts.
• Operate the vehicle in a well-ventilated work area; Exhaust gases
are poisonous.
• Put blocks on drive wheels and never leave vehicle unattended
while running tests.
• Use extreme caution when working around the ignition coil,
distributor cap, ignition wires and spark plugs. These components
create hazardous voltages when the engine is running.
• Put transmission in PARK (for automatic transmission) or
NEUTRAL (for manual transmission) and make sure the parking
brake is engaged.
• Keep a fire extinguisher suitable for gasoline/chemical/electrical
fires nearby.
• Don’t connect or disconnect any test equipment with ignition on or
engine running.
• Keep the Scan Tool dry, clean and free from oil, water and grease.
Use a mild detergent on a clean cloth to clean the outside of the
Scan Tool, when necessary.
3
GENERAL INFORMATION
On-Board-Diagnostics (OBD) II
The first generation of On-Board Diagnostic (called OBD I), was
developed by the California Air Resources Board (ARB) and
implemented in 1988 to monitor some of the emission control
components on vehicles. As technology evolved and the desire to
improve the OBD I system increased, a new generation of On-Board
Diagnostics system was developed. This second generation of
On-Board Diagnostic regulations is called “OBD II”. The OBD II
system is designed to monitor emission control systems and key
engine components by performing either continuous or periodic
tests of specific components and vehicle conditions. When a
problem is detected, the OBD II system turns on a warning lamp
(MIL) on the vehicle instrument panel to alert the driver typically by
the phrase of “Check Engine” or “Service Engine Soon”. The system
will also store important information about the detected malfunction
so that a technician can accurately find and fix the problem.
Here below follow three pieces of such valuable information:
• Whether the Malfunction Indicator Light (MIL) is commanded ‘on’ or ‘off’;
• Which, if any, Diagnostic Trouble Codes (DTCs) are stored;
• Readiness Monitor Status.
Diagnostic Trouble Codes (DTCs)
OBD II Diagnostic Trouble Codes are codes that are stored by the
on-board computer diagnostic system in response to a problem
found in the vehicle. These codes identify a particular problem area
and are intended to provide you with a guide as to where a fault
might be occurring within a vehicle. OBD II Diagnostic Trouble
Codes consist of a five-digit alphanumeric code. The first character,
a letter, identifies the control system which sets the code. The other
four characters, all numbers, provide additional information on
where the DTC originated and the operating conditions that caused
it to set. Here is an example to illustrate the structure of the digits:
4
DTC EXAMPLE
P0202
Systems
B = Body
Sub-Systems
C = Chassis
1 = Fuel & Air Metering
P = Powertrain
2 = Fuel & Air Metering U = Network
3 = Ignition System or
Engine Misfire
4 = Auxiliary Emissions Controls
5 = Vehicle Speed Control
Code Type
& Idol Controls
0 = Generic
6 = Computer Output Circuits
1 = Manufacturer
7 = Transmission Controls
Specific
8 = Transmission Controls
Identifying
specific
malfunctioning
section of the
systems
Location of the Data Link Connector (DLC)
The DLC (Data Link Connector or Diagnostic Link Connector) is
the standardized 16-cavity connector where diagnostic scan tools
interface with the vehicle’s on-board computer. The DLC is usually
located 12 inches from the center of the instrument panel (dash),
under or around the driver’s side for most vehicles. For some Asian
and European vehicles, the DLC is located behind the ashtray and
the ashtray must be removed to access the connector. Refer to the
vehicle’s service manual for the location if the DLC cannot be found.
OBD II Readiness Monitors
An important part of a vehicle’s OBDII system is the Readiness
monitors, which are indicators used to find out if all of the emissions
components have been evaluated by the OBD II system. They are
running periodic tests on specific systems and components to
ensure that they are performing within allowable limits.
5
Currently, there are eleven OBD II Readiness Monitors (or I/M Monitors)
defined by the U.S. Environmental Protection Agency (EPA). Not all
monitors are supported by all vehicles and the exact number of monitors in
any vehicle depends on the motor vehicle manufacturer’s emissions control
strategy. Continuous Monitors -- Some of the vehicle components or
systems are continuously tested by the vehicle’s OBDII system, while
others are tested only under specific vehicle operating conditions. The
continuously monitored components listed below are always ready:
1. Misfire
2. Fuel System
3. Comprehensive Components (CCM)
Once the vehicle is running, the OBDII system is continuously checking the
above components, monitoring key engine sensors, watching for engine
misfire, and monitoring fuel demands. Non--Continuous Monitors -- Unlike
the continuous monitors, many emissions and engine system components
require the vehicle to be operated under specific conditions before the
monitor is ready. These monitors are termed non-continuous monitors and
are listed below:
1. EGR System
2. O2 Sensors
3. Catalyst
4. Evaporative System
5. O2 Sensor Heater
6. Secondary air
7. Heated Catalyst
8. A/C system
OBD II Monitor Readiness Status
OBDII systems must indicate whether or not the vehicle’s PCM’s monitor
system has completed testing on each component. Components that have
been tested will be reported as “Ready”, or “Complete”, meaning they have
been tested by the OBDII system. The purpose of recording readiness
status is to allow inspectors to determine if the vehicle’s OBDII system has
tested all the components and/or systems. mThe powertrain control module
(PCM) sets a monitor to “Ready” or “Complete” after an appropriate drive
cycle has been performed. The drive cycle that enables a monitor and sets
readiness codes to “ready” varies for each individual monitor. Once a
monitor is set as “Ready” or “Complete”, it will remain in this state.
6
A number of factors, including erasing of diagnostic trouble codes (DTCs)
with a scan tool or a disconnected battery, can result in Readiness Monitors
being set to “not ready”. Since the three continuous monitors are constantly
evaluating, they will be reported as “Ready” all of the time. If testing of a
particular supported non-continuous monitor has not been completed, the
monitor status will be reported as “Not Complete” or “Not Ready.”
In order for the OBD monitor system to become ready, the vehicle should
be driven under a variety of normal operating conditions. These operating
conditions may include a mix of highway driving and stop and go, city type
driving, and at least one overnight-off period. For specific information on
getting your vehicle’s OBD monitor system ready, please consult your
vehicle owner’s manual.
OBD II Terminology
Powertrain Control Module (PCM)--OBDII terminology for the on-board
computer that controls engine and drive train. Malfunction Indicator Light
(MIL)--Malfunction Indicator Light (Service Engine Soon, Check Engine) is a
term used for the light on the instrument panel. It is to alert the driver and/or
the repair technician that there is a problem with one or more of vehicle’s
systems and may cause emissions to exceed federal standards. If the MIL
illuminates with a steady light, it indicates that a problem has been detected
and the vehicle should be serviced as soon as possible.Under certain
conditions, the dashboard light will blink or flash. This indicates a severe
problem and flashing is intended to discourage vehicle operation. The
vehicle onboard diagnostic system can not turn the MIL off until the
necessary repairs are completed or the condition no longer exists.
DTC--Diagnostic Trouble Codes (DTC) that identifies which section
of the emission control system has malfunctioned.
Enabling criteria--Also termed Enabling Conditions. They are the
vehicle-specific events or conditions that must occur within the engine
before the various monitors will set, or run. Some monitors require the
vehicle to follow a prescribed “drive cycle” routine as part of the enabling
criteria. Drive cycles vary among vehicles and for each monitor in any
particular vehicle.
7
OBDII Drive Cycle-- A specific mode of vehicle operation that
provides conditions required to set all the readiness monitors
applicable to the vehicle to the “Ready” condition. The purpose
ofcompleting an OBD II drive cycle is to force the vehicle to run its
onboard diagnostics. Some form of a drive cycle needs to be
performed after DTCs have been erased from the PCM’s memory or
after the battery has been disconnected. Running through a
vehicle’s complete drive cycle will “set” the readiness monitors so
that future faults can be detected. Drive cycles vary depending on
the vehicle and the monitor that needs to be reset. For vehicle
specific drive cycle, consult the vehicle’s Owner’s Manual.
PRODUCT INFORMATION
Tool Description
1
2
3
4
1. LCD DISPLAY--Indicates test results. It is a backlit 2-line
display with 8 characters on each line.
2. ENTER BUTTON--Confirms a selection (or action) from a menu
list, or returns to the main menu.
3. SCROLL BUTTON-- Scrolls through menu items or cancel an operation.
4. OBD II CONNECTOR--Connects the Code Scanner to the
vehicle’s Data Link Connector (DLC).
8
Product Specifications
• Display--Backlit LCD, 2 lines, 8 characters each
• Operating Temperature--0 to 50°C (32 to 122 F°)
• Storage Temperature-- -20 to 70°C (-4 to 158 F°)
• Power--DC12V provided via the vehicle’s battery
• Dimensions: Length Width Height 113 mm (4.4") 74 mm (2.9") 21mm (0.83")
• Weight--250g (8.9 oz) 3.3
Product Features
• Works with all 1996 and newer cars & light trucks that are OBD II
compliant (including the CAN, VPW, PWM, ISO and KWP 2000
protocols)
• Reads and clears generic and manufacturer specific Diagnostic
Trouble Codes (DTCs) and turns off check engine light
• Supports multiple trouble code requests: generic codes, pending
codes and manufacturer’s specific codes
• Reviews the emission readiness status of OBD monitors
• Retrieves VIN (Vehicle Identification No.) on 2002 and newer
vehicles that support Mode 9
• Determines the malfunction indicator lamp (MIL) status
• Easy to use with one plug-in; Highly reliable and accurate
• Easy-to-read crystal-clear backlit 2-line LCD display
• Stand-alone unit with no need for an additional laptop computer to operate
• Small in size and conveniently fits in your palm
• Safely communicates with the on-board computer
• No batteries needed--powered via detachable OBD II cable
9
Vehicle Coverage
The MaxiScan OBD II Scan Tool is specially designed to work with
all OBD II compliant vehicles, including those equipped with the
next-generation protocol-Control Area Network (CAN). It is required
by EPA that All 1996 and newer vehicles (cars and light trucks) sold
in the United States must be OBD II compliant and this includes all
Domestic, Asian and European vehicles.
A small number of 1994 and 1995 model year gasoline vehicles are
OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II
compliant, check the Vehicle Emissions Control Information (VECI)
Label which is located under the hood or by the radiator of most
vehicles. If the vehicle is OBD II compliant, the label will designate
“OBD II Certified”. Additionally, Government regulations mandate
that all OBD II compliant vehicles must have a “common” sixteen-pin
Data Link Connector (DLC).
For your vehicle to be OBD II compliant it must have a 16-pin DLC
(Data Link Connector) under the dash and the Vehicle Emission Control
Information Label must state that the vehicle is OBD II compliant.
10
OPERATING INSTRUCTIONS
Reading Codes
CAUTION: Don’t connect or disconnect any test equipment
with ignition on or engine running.
1. Turn the ignition off.
2. Locate the 16-pin Data Link Connector (DLC) and plug into the
Scan Tool cable connector to the DLC.
3. Wait for the LCD display to read “C.A.N.OBD2”.
C.A.N.
OBD2
4. Turn the ignition on. But do not start the engine.
5. Press the ENTER button. A sequence of messages showing the
OBD2 protocols will be observed on the display until the vehicle
protocol is detected.
SCAN...
VPW
SCAN...
PWM
SCAN...
KPW 2000
ISO9141
PROTOCOL
SCAN...
CAN
• Not all the above messages will be displayed unless protocol of
the vehicle being tested is the last one—the ISO9141 protocol.
11
They will stop appearing after the vehicle protocol is detected and a
confirmation message of “XXX Protocol” is displayed.
• If a “LINK ERROR!” message shows up, turn the ignition off for
about 10 seconds, check if the Scan Tool’s OBDII connector is
securely connected to the vehicle’s DLC, and then turn the ignition
back to on. Repeat the procedure from step 5. If the “LINK ERROR”
message does not go away, then there may be problems for the
Scan Tool to communicate with the vehicle.
6. Wait for the main menu to come up after a brief overview
displaying the scanning results with the total number of DTCs and
the overall I/M Monitor Status.
DTC: 02
IM: YES
7. Select “DTC” from the main menu by pressing the ENTER button.
MENU:
1. DTC
• If there are no Diagnostic Trouble Codes retrieved, the display will
indicate “NO CODES”.
NO
CODES
• If there are any Diagnostic Trouble Codes, then the total number of
the Fault Codes followed by that of the Pending Codes will be reported on
the display.
12
FAULT: 02
PEND: 02
8. Read the Diagnostic Trouble Codes by pressing the SCROLL button.
• The first code number will appear on the first line of the LCD
display, the numerical sequence of the code and the total number of
the codes stored will appear on the second line. To view additional
codes, press the SCROLL button to scroll, as necessary, until all the
codes have been shown up.
P0101
01/04
• If the code retrieved is a pending code, a “PD” will show on the
LCD display in the end.
P0005 PD
01/05
• To view previous codes, press the SCROLL button to scroll
through to the end, and then start from the first of the list.
9. Look up part 5 for Diagnostic Trouble Code Definitions. Match the
retrieved DTC(S) with those listed and read the definitions.
13
Erasing Codes
CAUTION: Erasing the Diagnostic Trouble Codes allows the Scan Tool
to delete not only the codes from the vehicle’s on-board computer, but
also “Freeze Frame” data and manufacturer specific enhanced data.
Further, the I/M Readiness Monitor Status for all vehicle Monitors is
reset to Not Ready or Not Complete status. Do not erase the codes
before the system has been checked completely by a technician.
1. If you decide to erase the DTCs, Select “2. ERASE” from the
main menu by pressing the ENTER button.
MENU:
2. ERASE
• If the Scan Tool is not connected or no communication is
established with the vehicle yet, then refer to “Reading Codes” from 1
to 6 on page 10.
2. A message of “ERASE? YES NO” comes up asking for your
confirmation.
ERASE?
YES NO
3. If you do not want to proceed with erasing the codes, press the
SCROLL button to exit.
4. If you do wish to proceed to erase the codes, then press the
ENTER button.
5. If the codes are cleared successfully, an “ERASE DONE!” message
will show on the display. Press the ENTER button to Return to the main
Menu list.
14
ERASE
DONE
6. If the codes are not cleared, then an “ERASE FAIL!” message will
appear. Press the ENTER button to Return to the main Menu list.
ERASE
FAIL!
HOT KEY: Pressing and Holding the SCROLL button for about 3 seconds
will allow you to erase the DTCs more quickly than through the main menu.
Retrieving I/M Readiness Status
IMPORTANT: I/M Readiness function is used to check the operations of
the Emission System on OBD2 compliant vehicles. It is an excellent
function to use prior to having a vehicle inspected for compliance to a
state emissions program.
An I/M Readiness Status result of “NO” does not necessarily indicate that
the vehicle being tested will fail the state I/M inspection. For some states,
one or more such monitors may be allowed to be “Not Ready” to pass the
emissions inspection.
• “YES”--All monitors supported on the vehicle have completed their
diagnostic testing and the MIL light is not on
• “NO”--At least one monitor supported on the vehicle has not completed its
diagnostic testing, and (or) the “Check Engine”( MIL) light is on
• “READY”—Indicates that a particular monitor being checked has
completed its diagnostic testing
• “Not RDY(NOT READY)”—Indicates that a particular monitor being
checked has not completed its diagnostic testing.
• “N/A”—The monitor is not supported on that vehicle
• “ ͢ ”-- A flashing Right Arrow indicates additional information is available
on the next screen
• “˿_”-- A flashing Left Arrow indicates additional information is
available on the previous screen
15
1. Select “3. I/M” from the main menu by pressing the ENTER button.
MENU:
3. VM
• If the Scan Tool is not connected yet, then refer to “Reading
Codes” from 1 to 6 on page10.
2. Use the SCROLL button to view the status of the MIL light (“ON”
or “OFF) and the following monitors:
• MISFIRE--Misfire monitor
• FUEL--Fuel System Monitor
• CCM--Comprehensive Components Monitor
• CAT-- Catalyst Monitor
• HCM--Heated Catalyst Monitor
• EVAP-- Evaporative System Monitor
• 2AIR-- Secondary Air Monitor
• A/C--A/C system Monitor
• O2S-- O2 Sensors Monitor
• HO2S--O2 Sensor Heater Monitor
• EGR-- EGR System Monitor
3. Press the ENTER button to return to the main Menu.
16
Viewing VIN Number
The View VIN function allows you to retrieve the Vehicle
Identification No. on 2002 and newer vehicles that support Mode 9.
1. Select “4. VIN” from the main menu by pressing the ENTER button.
MENU:
4. VIN
• If the Scan Tool is not connected yet, then refer to “Reading
Codes” from step 1 to 6 on page 10.
2. Use the SCROLL button to view additional digits of the 17-digit
string.
• “ ͢ ”-- A flashing Right Arrow indicates additional digits of VIN
string are available on the next screen.
• “˿_”-- A flashing Left Arrow indicates additional digits of VIN string
are available on the previous screen
3. Press the ENTER button to return to the main Menu.
Rescanning Data
The RESCAN function allows you to retrieve the most current data
stored in the ECM or to re-link to the vehicle if communication is
disconnected.
1. Select “5. RESCAN” from the main menu by pressing the
ENTER button.
MENU:
5. RESCAN
• If the Scan Tool is not connected yet, then refer to “Reading
Codes” from 1 to 6 on page 10.
2. Use either the SCROLL or ENTER button to return to the main menu.
17
DIAGNOSTIC TROUBLE CODE (DTC) DEFINITIONS
The following Diagnostic Trouble Code Definitions lists provide only Generic
Diagnostic Trouble Codes. For Manufacturer Specific Diagnostic Trouble
Code Definitions, consult the vehicle’s service manual.
CAUTION: Parts or components should not be replaced based on
only a DTC without first consulting the vehicle service manual for
more information on possible causes of the fault as well as required
testing procedures.
OBDII Generic DTC Definitions
P0001 P0002 P0003 P0004 P0005 P0006 P0007 P0008 P0009 P0010 P0011 P0012 P0013 P0014 P0015 P0016 P0017 P0018 P0019 P0020 P0021 P0022 18
Fuel Volume Regulator Control Circuit Open
Fuel Volume Regulator Control Circuit Range/Performance
Fuel Volume Regulator Control Circuit Low
Fuel Volume Regulator Control Circuit High
Fuel Shutoff Valve. A Control Circuit Open
Fuel Shutoff Valve. A Control Circuit Low
Fuel Shutoff Valve. A Control Circuit High
Engine Position System Performance (Bank 1)
Engine Position System Performance (Bank 2)
Camshaft Position Actuator A -Bank 1 Circuit Malfunction
Camshaft Position Actuator A -Bank 1 Timing Over-Advanced
Camshaft Position Actuator A - Bank 1 Timing Over-Retarded
Camshaft Position Actuator B - Bank 1 Circuit Malfunction
Camshaft Position Actuator B - Bank 1 Timing Over-Advanced
Camshaft Position Actuator B - Bank 1 Timing Over-Retarded
Cam/Crankshaft Pos. Correlation Sensor A - Bank 1
Cam/Crankshaft Pos. Correlation Sensor B - Bank 1
Cam/Crankshaft Pos. Correlation Sensor A - Bank 2
Cam/Crankshaft Pos. Correlation Sensor B - Bank 2
Camshaft Position Actuator A - Bank 2 Circuit Malfunction
Camshaft Position Actuator A - Bank 2 Timing Over-Advanced
Camshaft Position Actuator A -Bank 2 Timing Over-Retarded
OBDII Generic DTC Definitions
P0023 P0024 P0025 P0026 P0027 P0028 P0029 P0030 P0031 P0032 P0033 P0034 P0035 P0036 P0037 P0038 P0039 P0040 P0041 P0042 P0043 P0044 P0045 P0046 P0047 P0048 P0049 P0050 P0051 P0052 P0053 P0054 P0055 P0056 P0057 P0058 Camshaft Position Actuator B - Bank 2 Circuit Malfunction
Camshaft Position Actuator B - Bank 2 Timing Over-Advanced
Camshaft Position Actuator B - Bank 2 Timing Over-Retarded
Intake Valve-Bank 1 Control Solenoid CKT Range/Performance
Exhaust Valve-Bank 1 Control Solenoid CKT Range/Performance
Intake Valve-Bank 2 Control Solenoid CKT Range/Performance
Exhaust Valve-Bank 2 Control Solenoid CKT Range/Performance
HO2S Bank 1 Sensor 1 Heater Circuit
HO2S Bank 1 Sensor 1 Heater Circuit Low
HO2S Bank 1 Sensor 1 Heater Circuit High
Turbo/Sup Wastegate Control Circuit
Turbo/Sup Wastegate Control Circuit Low
Turbo/Sup Wastegate Control Circuit High
HO2S Bank 1 Sensor 2 Heater Circuit
HO2S Bank 1 Sensor 2 Heater Circuit Low
HO2S Bank 1 Sensor 2 Heater Circuit High
Turbo/Super Charger Bypass Control CKT Performance
O2 Bank 1 Sensor 1 Signals Swapped w/ O2 Bank 2 Sensor 1
O2 Bank 1 Sensor 2 Signals Swapped w/ O2 Bank 2 Sensor 2
HO2S Bank 1 Sensor 3 Heater Circuit
HO2S Bank 1 Sensor 3 Heater Circuit Low
HO2S Bank 1 Sensor 3 Heater Circuit High
Turbo/Super Charger Boost Control Solenoid A Circuit Open
Turbo/Super Charger Boost Control Solenoid A Circuit Range/ Perform
Turbo/Super Charger Boost Control Solenoid A Circuit Low
Turbo/Super Charger Boost Control Solenoid A Circuit High
Turbo/Super Charger Boost Input/Turbine Speed Overspeed
HO2S Bank 2 Sensor 1 Heater Circuit
HO2S Bank 2 Sensor 1 Heater Circuit Low
HO2S Bank 2 Sensor 1 Heater Circuit High
HO2S Bank 1 Sensor 1 Heater Resistance
HO2S Bank 1 Sensor 2 Heater Resistance
HO2S Bank 1 Sensor 3 Heater Resistance
HO2S Bank 2 Sensor 2 Heater Circuit
HO2S Bank 2 Sensor 2 Heater Circuit Low
HO2S Bank 2 Sensor 2 Heater Circuit High
19
OBDII Generic DTC Definitions
P0059 P0060 P0061 P0062 P0063 P0064 P0065 P0066 P0067 P0068 P0069 P0070 P0071 P0072 P0073 P0074 P0075 P0076 P0077 P0078 P0079 P0080 P0081 P0082 P0083 P0084 P0085 P0086 P0087 P0088 P0089 P0090 P0091 P0092 P0093 P0094 20
HO2S Bank 2 Sensor 1 Heater Resistance
HO2S Bank 2 Sensor 2 Heater Resistance
HO2S Bank 2 Sensor 3 Heater Resistance
HO2S Bank 2 Sensor 3 Heater Circuit
HO2S Bank 2 Sensor 3 Heater Circuit Low
HO2S Bank 2 Sensor 3 Heater Circuit High
Air Assisted Injector. Control Range/Performance
Air Assisted Injector. Control Circuit Low
Air Assisted Injector. Control Circuit High
MAF/MAP Sensor Throttle Position Correlation
MAP/BARO Correlation
Ambient Air Temp. Sensor Circuit
Ambient Air Temp. Sensor Range/Performance
Ambient Air Temp. Sensor Circuit Low
Ambient Air Temp. Sensor Circuit High
Ambient Air Temp. Sensor CKT Intermittent
Intake Valve-Bank 1 Control Circuit
Intake Valve-Bank 1 Control Circuit Low
Intake Valve-Bank 1 Control Circuit High
Exhaust Valve-Bank1 Control Circuit
Exhaust Valve-Bank1 Control Circuit Low
Exhaust Valve-Bank1 Control Circuit High
Intake Valve-Bank 2 Control Circuit
Intake Valve-Bank 2 Control Circuit Low
Intake Valve-Bank 2 Control Circuit High
Exhaust Valve-Bank2 Control Circuit
Exhaust Valve-Bank2 Control Circuit Low
Exhaust Valve-Bank2 Control Circuit High
Fuel Rail Pressure Too Low
Fuel Rail Pressure Too High
Fuel Pressure Regulator 1 Performance
Fuel Pressure Regulator 1 Control Circuit
Fuel Pressure Regulator 1 Control Circuit Low
Fuel Pressure Regulator 1 Control Circuit High
Fuel System Leak (Large)
Fuel System Leak (Small)
OBDII Generic DTC Definitions
P0095 P0096 P0097 P0098 P0099 P0100 P0101 P0102 P0103 P0104 P0105 P0106 P0107 P0108 P0109 P0110 P0111 P0112 P0113 P0114 P0115 P0116 P0117 P0118 P0119 P0120 P0121 P0122 P0123 P0124 P0125 P0126 P0127 P0128 P0129 P0130 IAT Sensor 2 Circuit
IAT Sensor 2 CKT Range/Performance
IAT Sensor 2 Circuit Low
IAT Sensor 2 Circuit High
IAT Sensor 2 CKT Intermittent
MAF or VAF A Circuit Malfunction
MAF or VAF A Circuit Range/Performance
MAF or VAF A Circuit Low Input
MAF or VAF A Circuit High Input
MAF or VAF A Circuit Intermittent
MAP/BARO Circuit Malfunction
MAP/BARO CKT Range/Performance
MAP/BARO Circuit Low Input
MAP/BARO Circuit High Input
MAP/BARO CKT Intermittent
IAT Sensor Circuit Malfunction
IAT Sensor 1 CKT Range/Performance
IAT Sensor 1 Circuit Low Input
IAT Sensor 1 Circuit High Input
IAT Sensor 1 CKT Intermittent
Engine Coolant Temp Circuit Malfunction
Engine Coolant Temp CKT Range/Performance
Engine Coolant Temp Circuit Low Input
Engine Coolant Temp Circuit High Input
Engine Coolant Temp CKT Intermittent
TPS/Pedal Position Sensor A Circuit Malfunction
TPS/Pedal Position Sensor A CKT Range/Performance
TPS/Pedal Position Sensor A Circuit Low Input
TPS/Pedal Position Sensor A Circuit High Input
TPS/Pedal Position Sensor A CKT Intermittent
Closed Loop Fuel Ctrl Insufficient Coolant Temp
Coolant Temp Insufficient Stable Operation
IAT Sensor Too High
Coolant Temp Below Thermostat Regulating Temp
Barometric Pressure Too Low
O2 Sensor Circuit Malfunction (Bank 1 Sensor 1)
21
OBDII Generic DTC Definitions
P0131 P0132 P0133 P0134 P0135 P0136 P0137 P0138 P0139 P0140 P0141 P0142 P0143 P0144 P0145 P0146 P0147 P0148 P0149 P0150 P0151 P0152 P0153 P0154 P0155 P0156 P0157 P0158 P0159 P0160 P0161 P0162 P0163 P0164 P0165 P0166 22
O2 Sensor Circuit Low Volts (Bank 1 Sensor 1)
O2 Sensor Circuit High Volts (Bank 1 Sensor 1)
O2 Sensor CKT Slow Response (Bank 1 Sensor 1)
O2 Sensor CKT No Activity (Bank 1 Sensor 1)
O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1)
O2 Sensor Circuit Malfunction (Bank 1 Sensor 2)
O2 Sensor Circuit Low Volts (Bank 1 Sensor 2)
O2 Sensor Circuit High Volts (Bank 1 Sensor 2)
O2 Sensor CKT Slow Response (Bank 1 Sensor 2)
O2 Sensor CKT No Activity (Bank 1 Sensor 2)
O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)
O2 Sensor Circuit Malfunction (Bank 1 Sensor 3)
O2 Sensor Circuit Low Volts (Bank 1 Sensor 3)
O2 Sensor Circuit High Volts (Bank 1 Sensor 3)
O2 Sensor CKT Slow Response (Bank 1 Sensor 3)
O2 Sensor CKT No Activity (Bank 1 Sensor 3)
O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 3)
Fuel Delivery Malfunction
Fuel Timing Malfunction
O2 Sensor Circuit Malfunction (Bank 2 Sensor 1)
O2 Sensor Circuit Low Volts (Bank 2 Sensor 1)
O2 Sensor Circuit High Volts (Bank 2 Sensor 1)
O2 Sensor CKT Slow Response (Bank 2 Sensor 1)
O2 Sensor CKT No Activity (Bank 2 Sensor 1)
O2 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)
O2 Sensor Circuit Malfunction (Bank 2 Sensor 2)
O2 Sensor Circuit Low Volts (Bank 2 Sensor 2)
O2 Sensor Circuit High Volts (Bank 2 Sensor 2)
O2 Sensor CKT Slow Response (Bank 2 Sensor 2)
O2 Sensor CKT No Activity (Bank 2 Sensor 2)
O2 Sensor Heater Circuit Malfunction (Bank 2 Sensor 2)
O2 Sensor Circuit Malfunction (Bank 2 Sensor 3)
O2 Sensor Circuit Low Volts (Bank 2 Sensor 3)
O2 Sensor Circuit High Volts (Bank 2 Sensor 3)
O2 Sensor CKT Slow Response (Bank 2 Sensor 3)
O2 Sensor CKT No Activity (Bank 2 Sensor 3)
OBDII Generic DTC Definitions
P0167 P0168 P0169 P0170 P0171 P0172 P0173 P0174 P0175 P0176 P0177 P0178 P0179 P0180 P0181 P0182 P0183 P0184 P0185 P0186 P0187 P0188 P0189 P0190 P0191 P0192 P0193 P0194 P0195 P0196 P0197 P0198 P0199 P0200 P0201 P0202 O2 Sensor Heater Circuit Malfunction (Bank 2 Sensor 3)
Engine Fuel Temperature Too High
Fuel Composition Incorrect
Fuel Trim Malfunction (Bank 1)
System Too Lean (Bank 1)
System Too Rich (Bank 1)
Fuel Trim Malfunction (Bank 2)
System Too Lean (Bank 2)
System Too Rich (Bank 2)
Fuel Compensation Sensor Circuit Malfunction
Fuel Compensation Sensor CKT Range/Performance
Fuel Compensation Sensor Circuit Low Input
Fuel Compensation Sensor Circuit High Input
Fuel Temperature Sensor A Circuit Malfunction
Fuel Temperature Sensor A CKT Range/Performance
Fuel Temperature Sensor A Circuit Low Input
Fuel Temperature Sensor A Circuit High Input
Fuel Temperature Sensor A CKT Intermittent
Fuel Temperature Sensor B Circuit Malfunction
Fuel Temperature Sensor B CKT Range/Performance
Fuel Temperature Sensor B Circuit Low Input
Fuel Temperature Sensor B Circuit High Input
Fuel Temperature Sensor B CKT Intermittent
Fuel Rail Pressure Sensor Circuit Malfunction
Fuel Rail Pressure Sensor CKT Range/Performance
Fuel Rail Pressure Sensor Circuit Low Input
Fuel Rail Pressure Sensor Circuit High Input
Fuel Rail Pressure Sensor CKT Intermittent
Engine Oil Temp Sensor Circuit Malfunction
Engine Oil Temp Sensor CKT Range/Performance
Engine Oil Temp Sensor Circuit Low Input
Engine Oil Temp Sensor Circuit High Input
Engine Oil Temp Sensor CKT Intermittent
Injector Circuit Open
Injector Circuit Open Cylinder 1
Injector Circuit Open Cylinder 2
23
OBDII Generic DTC Definitions
P0203 P0204 P0205 P0206 P0207 P0208 P0209 P0210 P0211 P0212 P0213 P0214 P0215 P0216 P0217 P0218 P0219 P0220 P0221 P0222 P0223 P0224 P0225 P0226 P0227 P0228 P0229 P0230 P0231 P0232 P0233 P0234 P0235 P0236 P0237 P0238 24
Injector Circuit Open Cylinder 3
Injector Circuit Open Cylinder 4
Injector Circuit Open Cylinder 5
Injector Circuit Open Cylinder 6
Injector Circuit Open Cylinder 7
Injector Circuit Open Cylinder 8
Injector Circuit Open Cylinder 9
Injector Circuit Open Cylinder 10
Injector Circuit Open Cylinder 11
Injector Circuit Open Cylinder 12
Cold Start Injector 1 Malfunction
Cold Start Injector 2 Malfunction
Engine Shutoff Solenoid Malfunction
Injection Timing Control Circuit Malfunction
Engine Overtemp Condition
Transmission Overtemp Condition
Engine Overspeed Condition
TPS/Pedal Position Sensor/Switch B Circuit Malfunction
TPS/Pedal Position Sensor/Switch B CKT Range/Performance
TPS/Pedal Position Sensor/Switch B Circuit Low Input
TPS/Pedal Position Sensor/Switch B Circuit High Input
TPS/Pedal Position Sensor/Switch B CKT Intermittent
TPS/Pedal Position Sensor/Switch C Circuit Malfunction
TPS/Pedal Position Sensor/Switch C CKT Range/Performance
TPS/Pedal Position Sensor/Switch C Circuit Low Input
TPS/Pedal Position Sensor/Switch C Circuit High Input
TPS/Pedal Position Sensor/Switch C CKT Intermittent
Fuel Pump Primary Circuit Malfunction
Fuel Pump Secondary Circuit Low
Fuel Pump Secondary Circuit High
Fuel Pump Secondary Circuit Intermittent Ckt
Engine Overboost Condition
Turbo/Super Boost Sensor A Circuit Malfunction
Turbo/Super Boost Sensor A CKT Range/Performance
Turbo/Super Boost Sensor A Circuit Low Input
Turbo/Super Boost Sensor A Circuit High Input
OBDII Generic DTC Definitions
P0239 Turbo/Super Boost Sensor B Circuit Malfunction
P0240 Turbo/Super Boost Sensor B CKT Range/Performance
P0241 Turbo/Super Boost Sensor B Circuit Low Input
P0242 Turbo/Super Boost Sensor B Circuit High Input
P0243 Turbo/Sup Wastegate Solenoid A Malfunction
P0244 Turbo/Sup Wastegate Solenoid A Range/Performance
P0245 Turbo/Sup Wastegate Solenoid A Low
P0246 Turbo/Sup Wastegate Solenoid A High
P0247 Turbo/Sup Wastegate Solenoid B Malfunction
P0248 Turbo /Sup Wastegate Solenoid B Range/Performance
P0249 Turbo/Sup Wastegate Solenoid B Low
P0250 Turbo/Sup Wastegate Solenoid B High
P0251 Injection Pump Metering Control A
P0252 Injection Pump Metering Control A Range/Performance
P0253 Injection Pump Metering Control A Low
P0254 Injection Pump Metering Control A High
P0255 Injection Pump Metering Control A Intermittent (Cam/Rotor/Injector)
P0256 Injection Pump Metering Control B Malfunction (Cam/Rotor/Injector)
Injection Pump Metering Control B Range/Performance
P0257
(Cam/Rotor/Injector)
P0258 Injection Pump Metering Control B Low (Cam/Rotor/Injector)
P0259 Injection Pump Metering Control B High (Cam/Rotor/Injector)
Injection Pump Metering Control B Intermittent
P0260
(Cam/Rotor/Injector)
P0261 Cylinder 1 Injector Control Circuit Low
P0262 Cylinder 1 Injector Control Circuit High
P0263 Cylinder 1 Contribution Balance Fault
P0264 Cylinder 2 Injector Control Circuit Low
P0265 Cylinder 2 Injector Control Circuit High
P0266 Cylinder 2 Contribution Balance Fault
P0267 Cylinder 3 Injector Control Circuit Low
P0268 Cylinder 3 Injector Control Circuit High
P0269 Cylinder 3 Contribution Balance Fault
P0270 Cylinder 4 Injector Control Circuit Low
P0271 Cylinder 4 Injector Control Circuit High
P0272 Cylinder 4 Contribution Balance Fault
25
OBDII Generic DTC Definitions
P0273 P0274 P0275 P0276 P0277 P0278 P0279 P0280 P0281 P0282 P0283 P0284 P0285 P0286 P0287 P0288 P0289 P0290 P0291 P0292 P0293 P0294 P0295 P0296 P0297 P0298 P0299 P0300 P0301 P0302 P0303 P0304 P0305 P0306 P0307 P0308 26
Cylinder 5 Injector Control Circuit Low
Cylinder 5 Injector Control Circuit High
Cylinder 5 Contribution Balance Fault
Cylinder 6 Injector Control Circuit Low
Cylinder 6 Injector Control Circuit High
Cylinder 6 Contribution Balance Fault
Cylinder 7 Injector Control Circuit Low
Cylinder 7 Injector Control Circuit High
Cylinder 7 Contribution Balance Fault
Cylinder 8 Injector Control Circuit Low
Cylinder 8 Injector Control Circuit High
Cylinder 8 Contribution Balance Fault
Cylinder 9 Injector Control Circuit Low
Cylinder 9 Injector Control Circuit High
Cylinder 9 Contribution Balance Fault
Cylinder 10 Injector Control Circuit Low
Cylinder 10 Injector Control Circuit High
Cylinder 10 Contribution Balance Fault
Cylinder 11 Injector Control Circuit Low
Cylinder 11 Injector Control Circuit High
Cylinder 11 Contribution Balance Fault
Cylinder 12 Injector Control Circuit Low
Cylinder 12 Injector Control Circuit High
Cylinder 12 Contribution Balance Fault
Vehicle Overspeed Error
Engine Oil Temperature Too High
Turbo/Super Charger UnderBoost
Random/Multiple Cylinder Misfire Detected
Cylinder 1 Misfire Detected
Cylinder 2 Misfire Detected
Cylinder 3 Misfire Detected
Cylinder 4 Misfire Detected
Cylinder 5 Misfire Detected
Cylinder 6 Misfire Detected
Cylinder 7 Misfire Detected
Cylinder 8 Misfire Detected
OBDII Generic DTC Definitions
P0309 P0310 P0311 P0312 P0313 P0314 P0315 P0316 P0317 P0318 P0319 P0320 P0321 P0322 P0323 P0324 P0325 P0326 P0327 P0328 P0329 P0330 P0331 P0332 P0333 P0334 P0335 P0336 P0337 P0338 P0339 P0340 P0341 P0342 P0343 P0344 Cylinder 9 Misfire Detected
Cylinder 10 Misfire Detected
Cylinder 11 Misfire Detected
Cylinder 12 Misfire Detected
Misfire Detected Low Fuel Level
Misfire Detected Cyl. not Specific
Crankshaft Position System Variation Not Learned
Misfire Detected 1st 1000 Revs.
Rough Road Hardware Not Present
Rough Road Sensor A Signal Circuit
Rough Road Sensor B
Ignition/Dist Engine Speed Input Circuit Malfunction
Ignition/Dist Engine Speed Input CKT Range/Performance
Ignition/Dist Engine Speed Input Circuit No Signal
Ignition/Dist Engine Speed Input CKT Intermittent
Knock Control System Malfunction
Knock Sensor 1 Circuit Malfunction Bank 1 or 1 Sensor
Knock Sensor 1 CKT Range/Performance Bank 1 or 1 Sensor
Knock Sensor 1 Circuit Low Input Bank 1 or 1 Sensor
Knock Sensor 1 Circuit High Input Bank 1 or 1 Sensor
Knock Sensor 1 CKT Intermittent Bank 1 or 1 Sensor
Knock Sensor 2 Circuit Malfunction (Bank 2)
Knock Sensor 2 CKT Range/Performance (Bank 2)
Knock Sensor 2 Circuit Low Input (Bank 2)
Knock Sensor 2 Circuit High Input (Bank 2)
Knock Sensor 2 CKT Intermittent (Bank 2)
Crankshaft Position Sensor A Circuit Malfunction
Crankshaft Position Sensor A CKT Range/Performance
Crankshaft Position Sensor A Circuit Low Input
Crankshaft Position Sensor A Circuit High Input
Crankshaft Position Sensor A CKT Intermittent
Camshaft Position Sensor A - Bank 1 Circuit Malfunction
Camshaft Position Sensor A - Bank 1 CKT Range/Performance
Camshaft Position Sensor A - Bank 1 Circuit Low Input
Camshaft Position Sensor A - Bank 1 Circuit High Input
Camshaft Position Sensor A - Bank 1 CKT Intermittent
27
OBDII Generic DTC Definitions
P0345 P0346 P0347 P0348 P0349 P0350 P0351 P0352 P0353 P0354 P0355 P0356 P0357 P0358 P0359 P0360 P0361 P0362 P0363 P0365 P0366 P0367 P0368 P0369 P0370 P0371 P0372 P0373 P0374 P0375 P0376 P0377 P0378 P0379 P0380 P0381 28
Camshaft Position Sensor A - Bank 2 Circuit Malfunction
Camshaft Position Sensor A - Bank 2 CKT Range/Performance
Camshaft Position Sensor A - Bank 2 Circuit Low Input
Camshaft Position Sensor A - Bank 2 Circuit High Input
Camshaft Position Sensor A - Bank 2 CKT Intermittent
Ignition Coil Primary/Secondary Circuit Malfunction
Ignition Coil A Primary/Secondary Circuit Malfunction
Ignition Coil B Primary/Secondary Circuit Malfunction
Ignition Coil C Primary/Secondary Circuit Malfunction
Ignition Coil D Primary/Secondary Circuit Malfunction
Ignition Coil E Primary/Secondary Circuit Malfunction
Ignition Coil F Primary/Secondary Circuit Malfunction
Ignition Coil G Primary/Secondary Circuit Malfunction
Ignition Coil H Primary/Secondary Circuit Malfunction
Ignition Coil I Primary/Secondary Circuit Malfunction
Ignition Coil J Primary/Secondary Circuit Malfunction
Ignition Coil K Primary/Secondary Circuit Malfunction
Ignition Coil L Primary/Secondary Circuit Malfunction
Misfire Detected Fueling Disabled
Camshaft Position Sensor B - Bank 1 Circuit Malfunction
Camshaft Position Sensor B - Bank 1 CKT Range/Performance
Camshaft Position Sensor B - Bank 1 Circuit Low Input
Camshaft Position Sensor B - Bank 1 Circuit High Input
Camshaft Position Sensor B - Bank 1 CKT Intermittent
Timing Reference High Resolution Signal A Malfunction
Timing Reference High Resolution Signal A Too Many Pulses
Timing Reference High Resolution Signal A Too Few Pulses
Timing Reference High Resolution Signal A Erratic Pulses
Timing Reference High Resolution Signal A No Pulses
Timing Reference High Resolution Signal B Malfunction
Timing Reference High Resolution Signal B Too Many Pulses
Timing Reference High Resolution Signal B Too Few Pulses
Timing Reference High Resolution Signal B Erratic Pulses
Timing Reference High Resolution Signal B No Pulses
Glow Plug/Heater CKT A Malfunction
Glow Plug/Heater Indicator Circuit Malfunction
OBDII Generic DTC Definitions
P0382 P0383 P0384 P0385 P0386 P0387 P0388 P0389 P0390 P0391 P0392 P0393 P0394 P0400 P0401 P0402 P0403 P0404 P0405 P0406 P0407 P0408 P0409 P0410 P0411 P0412 P0413 P0414 P0415 P0416 P0417 P0418 P0419 P0420 P0421 P0422 Glow Plug/Heater CKT B Malfunction
Glow Plug Module Control Circuit Low
Glow Plug Module Control Circuit High
Crankshaft Position Sensor B Circuit Malfunction
Crankshaft Position Sensor B CKT Range/Performance
Crankshaft Position Sensor B Circuit Low Input
Crankshaft Position Sensor B Circuit High Input
Crankshaft Position Sensor B CKT Intermittent
Camshaft Position Sensor B - Bank 2 Circuit Malfunction
Camshaft Position Sensor B - Bank 2 CKT Range/Performance
Camshaft Position Sensor B - Bank 2 Circuit Low Input
Camshaft Position Sensor B - Bank 2 Circuit High Input
Camshaft Position Sensor B - Bank 2 CKT Intermittent
EGR Flow Malfunction
EGR Flow Insufficient
EGR Flow Excessive
EGR Flow Circuit Malfunction
EGR Flow CKT Range/Performance
EGR Flow Sensor A Circuit Low Input
EGR Flow Sensor A Circuit High Input
EGR Flow Sensor B Circuit Low Input
EGR Flow Sensor B Circuit High Input
EGR Flow Sensor A Circuit
Secondary Air Injection System Malfunction
Secondary Air Injection System Incorrect Flow
Secondary Air Injection System Valve A Malfunction
Secondary Air Injection System Valve A CKT Open
Secondary Air Injection System Valve A CKT Short
Secondary Air Injection System Valve B Malfunction
Secondary Air Injection System Valve B CKT Open
Secondary Air Injection System Valve B CKT Short
Secondary Air Injection System Relay A Malfunction
Secondary Air Injection System Relay B Malfunction
Catalyst Efficiency Below Threshold (Bank 1)
Warm Up Catalyst Below Threshold (Bank 1)
Main Catalyst Below Threshold (Bank 1)
29
OBDII Generic DTC Definitions
P0423 P0424 P0425 P0426 P0427 P0428 P0429 P0430 P0431 P0432 P0433 P0434 P0435 P0436 P0437 P0438 P0439 P0440 P0441 P0442 P0443 P0444 P0445 P0446 P0447 P0448 P0449 P0450 P0451 P0452 P0453 P0454 P0455 P0456 P0457 P0458 30
Heated Catalyst Below Threshold (Bank 1)
Heated Catalyst Temp Below Threshold (Bank 1)
Catalyst Temp. Sensor (Bank 1 Sensor 1)
Catalyst Temp. Sensor Performance (Bank 1 Sensor 1)
Catalyst Temp. Sensor Circuit Low (Bank 1 Sensor 1)
Catalyst Temp. Sensor Circuit High (Bank 1 Sensor 1)
Catalyst Heater Control (Bank 1)
Catalyst Efficiency Below Threshold (Bank 2)
Warm Up Catalyst Below Threshold (Bank 2)
Main Catalyst Below Threshold (Bank 2)
Heated Catalyst Below Threshold (Bank 2)
Heated Catalyst Temp Below Threshold (Bank 2)
Catalyst Temp. Sensor (Bank 2 Sensor 1)
Catalyst Temp. Sensor Performance (Bank 2 Sensor 1)
Catalyst Temp. Sensor Circuit Low (Bank 2 Sensor 1)
Catalyst Temp. Sensor Circuit High (Bank 2 Sensor 1)
Catalyst Heater Control (Bank 2)
EVAP Emission Control System Malfunction
EVAP Emission Control System Purge Flow Fault
EVAP Emission Control System Leak (Small)
EVAP Emission Control System Purge Valve C Fault
EVAP Emission Control System Purge Valve C Open
EVAP Emission Control System Purge Valve C Short
EVAP Emission Control System Vent Circuit Malf
EVAP Emission Control System Vent Circuit Open
EVAP Emission Control System Vent Circuit Short
EVAP Emission Control System Vent Vlv/Sol Malf
EVAP Emission Control System Pres Sensor Fault
EVAP Emission Control System Pres Sensor Range
EVAP Emission Control System Pres Sensor Low
EVAP Emission Control System Pres Sensor High
EVAP Emission Control System Pres Sensor Erratic
EVAP Emission Control System Leak (Large)
EVAP Emission Control System Leak Very Small
EVAP Emission Control System Leak Cap Loose/Off
EVAP System Canister Purge Sol Circuit Low
OBDII Generic DTC Definitions
P0459 P0460 P0461 P0462 P0463 P0464 P0465 P0466 P0467 P0468 P0469 P0470 P0471 P0472 P0473 P0474 P0475 P0476 P0477 P0478 P0479 P0480 P0481 P0482 P0483 P0484 P0485 P0486 P0487 P0488 P0489 P0490 P0491 P0492 P0493 P0494 EVAP System Canister Purge Sol Circuit High
Fuel Level Sensor A Circuit Malfunction
Fuel Level Sensor A CKT Range/Performance
Fuel Level Sensor A Circuit Low Input
Fuel Level Sensor A Circuit High Input
Fuel Level Sensor A CKT Intermittent
EVAP Emission Purge Flow Sensor Circuit Malfunction
EVAP Emission Purge Flow Sensor CKT Range/Performance
EVAP Emission Purge Flow Sensor Circuit Low Input
EVAP Emission Purge Flow Sensor Circuit High Input
EVAP Emission Purge Flow Sensor CKT Intermittent
Exhaust Pressure Sensor Circuit Malfunction
Exhaust Pressure Sensor CKT Range/Performance
Exhaust Pressure Sensor Circuit Low Input
Exhaust Pressure Sensor Circuit High Input
Exhaust Pressure Sensor CKT Intermittent
Exhaust Pressure Control Valve Circuit Malfunction
Exhaust Pressure Control Valve CKT Range/Performance
Exhaust Pressure Control Valve Circuit Low Input
Exhaust Pressure Control Valve Circuit High Input
Exhaust Pressure Control Valve CKT Intermittent
Cooling Fan 1 Control Circuit
Cooling Fan 2 Control Circuit
Cooling Fan 3 Control Circuit
Control Fan Rationality Check Malfunction
Control Fan CKT Over Current
Control Fan Power/Ground Circuit Malfunction
EGR System Sensor B Circuit
EGR TPS Control Circuit
EGR TPS Control CKT Range/Performance
EGR Control Circuit Low
EGR Control Circuit High
Secondary Air System (Bank 1)
Secondary Air System (Bank 2)
Fan Speed Overspeed
Fan Speed Low
31
OBDII Generic DTC Definitions
P0495 P0496 P0497 P0498 P0499 P0500 P0501 P0502 P0503 P0504 P0505 P0506 P0507 P0508 P0509 P0510 P0511 P0512 P0513 P0514 P0515 P0516 P0517 P0518 P0519 P0520 P0521 P0522 P0523 P0524 P0525 P0526 P0527 P0528 P0529 P0530 32
Fan Speed High
EVAP Emission High Purge Flow Fault
EVAP Emission Low Purge Flow Fault
EVAP Emission Vent Vlv/Sol Malf Circuit Low
EVAP Emission Vent Vlv/Sol Malf Circuit High
Vehicle Speed Sensor A Malfunction
Vehicle Speed Sensor A Range/Performance
Vehicle Speed Sensor A Circuit Low Input
Vehicle Speed Sensor A Erratic/High
Brake Switch A Brake Switch B Correlation
Idle Control System Malfunction
Idle Control System RPM Low
Idle Control System RPM High
Idle Control System Circuit Low
Idle Control System Circuit High
Closed Throttle Position Switch
Idle Air Control Circuit
Starter Signal Circuit
Immobilizer Incorrect
Battery Temperature Sensor CKT Range/Performance
Battery Temperature Sensor Circuit
Battery Temperature Circuit Low
Battery Temperature Circuit High
Idle Air Control CKT Intermittent
Idle Air Control System Performance
Engine Oil Pressure Sensor/Switch Circuit Malfunction
Engine Oil Pressure Sensor/Switch Range/Performance
Engine Oil Pressure Sensor/Switch Low Voltage
Engine Oil Pressure Sensor/Switch High Voltage
Engine Oil Pressure Too Low
Cruise Servo CKT Range/Performance
Fan Speed Sensor Circuit
Fan Speed Sensor CKT Range/Performance
Fan Speed Sensor Circuit No Signal
Fan Speed Sensor CKT Intermittent
A/C Refrigerant Pressure Sensor A Circuit Malfunction
OBDII Generic DTC Definitions
P0531 P0532 P0533 P0534 P0535 P0536 P0537 P0538 P0539 P0540 P0541 P0542 P0543 P0544 P0545 P0546 P0547 P0548 P0549 P0550 P0551 P0552 P0553 P0554 P0555 P0556 P0557 P0558 P0559 P0560 P0561 P0562 P0563 P0564 P0565 P0566 A/C Refrigerant Pressure Sensor A CKT Range/Performance
A/C Refrigerant Pressure Sensor A Circuit Low Input
A/C Refrigerant Pressure Sensor A Circuit High Input
A/C Refrigerant Charge Loss
A/C Evaporator Temperature Sensor Circuit
A/C Evaporator Temperature Sensor CKT Range/Performance
A/C Evaporator Temperature Sensor Circuit Low
A/C Evaporator Temperature Sensor Circuit High
A/C Evaporator Temperature Sensor CKT Intermittent
Intake Air Heater A Circuit
Intake Air Heater A Circuit Low
Intake Air Heater A Circuit High
Intake Air Heater A Circuit Open
Exhaust Gas Temp. Sensor Circuit (Bank 1 Sensor 1)
Exhaust Gas Temp. Sensor Circuit Low (Bank 1 Sensor 1)
Exhaust Gas Temp. Sensor Circuit High (Bank 1 Sensor 1)
Exhaust Gas Temp. Sensor Circuit (Bank 2 Sensor 1)
Exhaust Gas Temp. Sensor Circuit Low (Bank 2 Sensor 1)
Exhaust Gas Temp. Sensor Circuit High (Bank 2 Sensor 1)
Power Steering Pres Sensor Circuit Malfunction
Power Steering Pres Sensor CKT Range/Performance
Power Steering Pres Sensor Circuit Low Input
Power Steering Pres Sensor Circuit High Input
Power Steering Pres Sensor CKT Intermittent
Brake Booster Pressure Sensor Circuit
Brake Booster Pressure Sensor CKT Range/Performance
Brake Booster Pressure Sensor Circuit Low Input
Brake Booster Pressure Sensor Circuit High Input
Brake Booster Pressure Sensor CKT Intermittent
System Voltage Malfunction
System Voltage Unstable
System Voltage Low
System Voltage High
Cruise Control Multi-Function. Input A Signal Error
Cruise Control On Signal Malfunction
Cruise Control Off Signal Malfunction
33
OBDII Generic DTC Definitions
P0567 P0568 P0569 P0570 P0571 P0572 P0573 P0574 P0575 P0576 P0577 P0578 P0579 P0580 P0581 P0582 P0583 P0584 P0585 P0586 P0587 P0588 P0589 P0590 P0591 P0592 P0593 P0594 P0595 P0596 P0597 P0598 P0599 P0600 P0601 P0602 34
Cruise Control Resume Signal Malfunction
Cruise Control Set Signal Malfunction
Cruise Control Coast Signal Malfunction
Cruise Control Acceleration Signal Error
Brake Switch A Circuit Malfunction
Brake Switch A Circuit Low Input
Brake Switch A Circuit High Input
Cruise Control Vehicle Speed Too High
Cruise Control Circuit Malfunction
Cruise Control Circuit Low Input
Cruise Control Circuit High Input
Cruise Control Multi-Function Input A Circuit Stuck
Cruise Control Multi-Function Input A CKT Range/Performance
Cruise Control Multi-Function Input A Circuit Low
Cruise Control Multi-Function Input A Circuit High
Cruise Control Vacuum Control Circuit Open
Cruise Control Vacuum Control Circuit Low
Cruise Control Vacuum Control Circuit High
Cruise Control Multi-Function Input Correlation
Cruise Control Vent Control Circuit Open
Cruise Control Vent Control Circuit Low
Cruise Control Vent Control Circuit High
Cruise Control Multi-Function Input B Circuit
Cruise Control Multi-Function Input B Circuit Stuck
Cruise Control Multi-Function Input B CKT Range/Performance
Cruise Control Multi-Function Input B Circuit Low
Cruise Control Multi-Function Input B Circuit High
Cruise Control Servo Control Circuit Open
Cruise Control Servo Control Circuit Low
Cruise Control Servo Control Circuit High
Cruise Control Circuit Open
Cruise Control Circuit Low
Cruise Control Circuit High
Serial Communication Link Malfunction
Internal Control Module Memory Check Sum Error
Control Module Programming Error
OBDII Generic DTC Definitions
P0603 P0604 P0605 P0606 P0607 P0608 P0609 P0610 P0611 P0612 P0613 P0614 P0615 P0616 P0617 P0618 P0619 P0620 P0621 P0622 P0623 P0624 P0625 P0626 P0627 P0628 P0629 P0630 P0631 P0632 P0633 P0634 P0635 P0636 P0637 P0638 PCM Keep Alive Memory (KAM) Error
PCM Random Access Memory (RAM) Error
PCM Read Only Memory (ROM) Error
PCM Processor Fault
Control Module Performance
Control Module VSS Output A Malfunction
Control Module VSS Output B Malfunction
Control Module Vehicle Options Malfunction
Injector Control Module Performance
Injector Control Module Relay Control
TCM Processor Fault
ECM/TCM Incompatible
Starter Relay Circuit
Starter Relay Circuit Low
Starter Relay Circuit High
Alternative Fuel Module (KAM) Error
Alternative Fuel Module Memory
Generator Control Malfunction
Generator L-Term. Lamp Control
Generator F-Term. Field F Control
Generator Lamp Control Circuit
Fuel Cap Lamp Circuit
Generator F-Term. Circuit Low
Generator F-Term. Circuit High
Fuel Pump A Control Circuit Open
Fuel Pump A Control Circuit Low
Fuel Pump A Control Circuit High
PCM VIN Not Program. Or Mismatch
TCM VIN Not Program. Or Mismatch
Odometer Code Not Programmed ECM/PCM
Immobilizer Code Not Programmed ECM/PCM
PCM/ECM/TCM Internal Temp. Too High
Power Steering Control Circuit
Power Steering Control Circuit Low
Power Steering Control Circuit High
Throttle Actuator Range/Performance (Bank 1)
35
OBDII Generic DTC Definitions
P0639 P0640 P0641 P0642 P0643 P0644 P0645 P0646 P0647 P0648 P0649 P0650 P0651 P0652 P0653 P0654 P0655 P0656 P0657 P0658 P0659 P0660 P0661 P0662 P0663 P0664 P0665 P0666 P0667 P0668 P0669 P0670 P0671 P0672 P0673 P0674 36
Throttle Actuator Range/Performance (Bank 2)
Intake Air Heater Control Circuit
Sensor A Reference Voltage Circuit Open
Sensor A Reference Voltage Circuit Low
Sensor A Reference Voltage Circuit High
Driver Display Serial Communication Link
A/C Clutch Relay Control Circuit
A/C Clutch Relay Control Circuit Low
A/C Clutch Relay Control Circuit High
Immobilizer Lamp Circuit
Cruise Control Lamp Circuit
MIL Control Circuit Malfunction
Sensor B Reference Voltage Circuit Open
Sensor B Reference Voltage Circuit Low
Sensor B Reference Voltage Circuit High
Engine RPM Circuit Malfunction
Engine Hot Lamp Output Circuit Malfunction
Fuel Level Output Circuit Malfunction
Actuator Supply Voltage A Circuit Open
Actuator Supply Voltage A Circuit Low
Actuator Supply Voltage A Circuit High
Intake Man Tuning Control CKT Open (Bank 1)
Intake Man Tuning Control CKT Low (Bank 1)
Intake Man Tuning Control CKT High (Bank 1)
Intake Man Tuning Control CKT Open (Bank 2)
Intake Man Tuning Control CKT Low (Bank 2)
Intake Man Tuning Control CKT High (Bank 2)
PCM/ECM/TCM Internal Temp. Sensor Circuit
PCM/ECM/TCM Internal Temp. Sensor Range/Performance
PCM/ECM/TCM Internal Temp. Sensor Circuit Low
PCM/ECM/TCM Internal Temp. Sensor Circuit High
Glow Plug/Heater Module Control
Glow Plug/Heater Cylinder 1
Glow Plug/Heater Cylinder 2
Glow Plug/Heater Cylinder 3
Glow Plug/Heater Cylinder 4
OBDII Generic DTC Definitions
P0675 P0676 P0677 P0678 P0679 P0680 P0681 P0682 P0683 P0684 P0685 P0686 P0687 P0688 P0689 P0690 P0691 P0692 P0693 P0694 P0695 P0696 P0697 P0698 P0699 P0700 P0701 P0702 P0703 P0704 P0705 P0706 P0707 P0708 P0709 P0710 Glow Plug/Heater Cylinder 5
Glow Plug/Heater Cylinder 6
Glow Plug/Heater Cylinder 7
Glow Plug/Heater Cylinder 8
Glow Plug/Heater Cylinder 9
Glow Plug/Heater Cylinder 10
Glow Plug/Heater Cylinder 11
Glow Plug/Heater Cylinder 12
Glow Plug/Heater Module Communication Problem
Glow Plug/Heater Communication Problem CKT Range/Performance
ECM/PCM Power Relay Control Circuit Open
ECM/PCM Power Relay Control Circuit Low
ECM/PCM Power Relay Control Circuit High
ECM/PCM Power Relay Sense Circuit Open
ECM/PCM Power Relay Sense Circuit Low
ECM/PCM Power Relay Sense Circuit High
Fan 1 Control Circuit Low
Fan 1 Control Circuit High
Fan 2 Control Circuit Low
Fan 2 Control Circuit High
Fan 3 Control Circuit Low
Fan 3 Control Circuit High
Sensor C Reference Voltage Circuit Open
Sensor C Reference Voltage Circuit Low
Sensor C Reference Voltage Circuit High
Trans Control Sys Malfunction
Trans Control Sys Range/Performance
Trans Control Sys Electrical
Brake Switch B Circuit Malfunction
Clutch Switch Input Circuit Malfunction
Trans Range Sensor Circuit Malfunction (PRNDL Input)
Trans Range Sensor CKT Range/Performance
Trans Range Sensor Circuit Low Input
Trans Range Sensor Circuit High Input
Trans Range Sensor CKT Intermittent
Transmission Fluid Temperature Sensor Circuit Malfunction
37
OBDII Generic DTC Definitions
P0711 P0712 P0713 P0714 P0715 P0716 P0717 P0718 P0719 P0720 P0721 P0722 P0723 P0724 P0725 P0726 P0727 P0728 P0729 P0730 P0731 P0732 P0733 P0734 P0735 P0736 P0737 P0738 P0739 P0740 P0741 P0742 P0743 P0744 P0745 P0746 38
Trans Fluid Temp Sensor A CKT Range/Performance
Trans Fluid Temp Sensor A Circuit Low Input
Trans Fluid Temp Sensor A Circuit High Input
Trans Fluid Temp Sensor A CKT Intermittent
Input/Turbine Speed Sensor A Circuit Malfunction
Input/Turbine Speed Sensor A CKT Range/Performance
Input/Turbine Speed Sensor A Circuit No Signal
Input/Turbine Speed Sensor A CKT Intermittent
Brake Switch B Circuit Low Input
Output Speed Sensor Circuit Malfunction
Output Speed Sensor Circuit Range/Performance
Output Speed Sensor Circuit No Signal
Output Speed Sensor CKT Intermittent
Brake Switch B Circuit High Input
Engine Speed Sensor Circuit Malfunction
Engine Speed Sensor CKT Range/Performance
Engine Speed Sensor Circuit No Signal
Engine Speed Sensor CKT Intermittent
Gear 6 Ratio Incorrect
Gear Ratio Incorrect
Gear 1 Ratio Incorrect
Gear 2 Ratio Incorrect
Gear 3 Ratio Incorrect
Gear 4 Ratio Incorrect
Gear 5 Ratio Incorrect
Reverse Ratio Incorrect
TCM Engine Speed Output Circuit
TCM Engine Speed Output Circuit Low
TCM Engine Speed Output Circuit High
TCC Circuit Malfunction
Torque Converter CKT Performance Or Stuck Off
Torque Converter Circuit Stuck On
Torque Converter Circuit Electrical
Torque Converter CKT Intermittent
Pres Control Sol. A Circuit Malfunction
Pres Control Sol. A CKT Performance Or Stuck Off
OBDII Generic DTC Definitions
P0747 P0748 P0749 P0750 P0751 P0752 P0753 P0754 P0755 P0756 P0757 P0758 P0759 P0760 P0761 P0762 P0763 P0764 P0765 P0766 P0767 P0768 P0769 P0770 P0771 P0772 P0773 P0774 P0775 P0776 P0777 P0778 P0779 P0780 P0781 P0782 Pres Control Sol. A Circuit Stuck On
Pres Control Sol. A Circuit Electrical
Pres Control Sol. A CKT Intermittent
Shift Solenoid A Malfunction
Shift Solenoid A CKT Performance Or Stuck Off
Shift Solenoid A Circuit Stuck On
Shift Solenoid A Circuit Electrical
Shift Solenoid A CKT Intermittent
Shift Solenoid B Malfunction
Shift Solenoid B CKT Performance Or Stuck Off
Shift Solenoid B Circuit Stuck On
Shift Solenoid B Circuit Electrical
Shift Solenoid B CKT Intermittent
Shift Solenoid C Malfunction
Shift Solenoid C CKT Performance Or Stuck Off
Shift Solenoid C Circuit Stuck On
Shift Solenoid C Circuit Electrical
Shift Solenoid C CKT Intermittent
Shift Solenoid D Malfunction
Shift Solenoid D CKT Performance Or Stuck Off
Shift Solenoid D Circuit Stuck On
Shift Solenoid D Circuit Electrical
Shift Solenoid D CKT Intermittent
Shift Solenoid E Malfunction
Shift Solenoid E CKT Performance Or Stuck Off
Shift Solenoid E Circuit Stuck On
Shift Solenoid E Circuit Electrical
Shift Solenoid E CKT Intermittent
Pres Ctrl Sol. B Circuit Malfunction
Pres Ctrl Sol. B CKT Performance Or Stuck Off
Pres Ctrl Sol. B Circuit Stuck On
Pres Ctrl Sol. B Circuit Electrical
Pres Ctrl Sol. B CKT Intermittent
Shift Malfunction
1-2 Shift Malfunction
2-3 Shift Malfunction
39
OBDII Generic DTC Definitions
P0783 P0784 P0785 P0786 P0787 P0788 P0789 P0790 P0791 P0792 P0793 P0794 P0795 P0796 P0797 P0798 P0799 P0800 P0801 P0802 P0803 P0804 P0805 P0806 P0807 P0808 P0809 P0810 P0811 P0812 P0813 P0814 P0815 P0816 P0817 P0818 40
3-4 Shift Malfunction
4-5 Shift Malfunction
Shift/Timing Solenoid Malfunction
Shift/Timing Solenoid Range/Performance
Shift/Timing Solenoid Low
Shift/Timing Solenoid High
Shift/Timing Solenoid Intermittent Ckt
Normal/Performance Switch Circuit Malfunction
Intermediate Shaft Speed Sensor A Circuit
Intermediate Shaft Speed Sensor A Circuit Range/Performance
Intermediate Shaft Speed Sensor A Circuit No Signal
Intermediate Shaft Speed Sensor A CKT Intermittent
Pres Ctrl Sol. C Malfunction
Pres Ctrl Sol. C CKT Performance Or Stuck Off
Pres Ctrl Sol. C Circuit Stuck On
Pres Ctrl Sol. C Circuit Electrical
Pres Ctrl Sol. C CKT Intermittent
Transfer Case Control System MIL Request
Reverse Inhibit Control Circuit Malfunction
Trans Control Sys MIL Request Circuit Open
1-4 Upshift (Skip Shift) Solenoid Circuit Malfunction
1-4 Upshift (Skip Shift) Lamp Circuit Malfunction
Clutch Position Sensor Circuit Malfunction
Clutch Position Sensor Circuit Range/Performance
Clutch Position Sensor Circuit Low
Clutch Position Sensor Circuit High
Clutch Position Sensor Circuit Intermittent Ckt
Clutch Position Control Malfunction
Clutch Slippage Excessive
Reverse Input Circuit Malfunction
Reverse Output Circuit Malfunction
Trans Range Display Circuit Malfunction
Upshift Switch Circuit Malfunction
Downshift Switch Circuit Malfunction
Starter Disable Circuit
Driveline Disconnect Switch Input
OBDII Generic DTC Definitions
P0819 P0820 P0821 P0822 P0823 P0824 P0825 P0826 P0827 P0828 P0829 P0830 P0831 P0832 P0833 P0834 P0835 P0836 P0837 P0838 P0839 P0840 P0841 P0842 P0843 P0844 P0845 P0846 P0847 P0848 P0849 P0850 P0851 P0852 P0853 P0854 Up/Down Shift SW Transmission Range Correlation
Gear Lever X-Y Sensor Circuit
Gear Lever X Sensor Circuit
Gear Lever Y Sensor Circuit
Gear Lever X Sensor Circuit Intermittent Ckt
Gear Lever Y Sensor Circuit Intermittent Ckt
Gear Lever Push/Pull Switch (Shift Anticipate)
Upshift Switch Downshift Switch Circuit
Upshift Switch Downshift Switch Circuit Low
Upshift Switch Downshift Switch Circuit High
5-6 Shift
Clutch Position Switch A Circuit Malfunction
Clutch Position Switch A Circuit Low
Clutch Position Switch A Circuit High
Clutch Position Switch B Circuit Malfunction
Clutch Position Switch B Circuit Low
Clutch Position Switch B Circuit High
4 Wheel Drive Switch Circuit Malfunction
4 Wheel Drive Switch CKT Range/Performance
4 Wheel Drive Switch Circuit Low
4 Wheel Drive Switch Circuit High
Trans Fluid Press Sensor/Switch A Circuit Malfunction
Trans Fluid Press Sensor/Switch A CKT Range/Performance
Trans Fluid Press Sensor/Switch A Circuit Low
Trans Fluid Press Sensor/Switch A Circuit High
Trans Fluid Press Sensor/Switch A CKT Intermittent
Trans Fluid Press Sensor/Switch B Circuit Malfunction
Trans Fluid Press Sensor/Switch B CKT Range/Performance
Trans Fluid Press Sensor/Switch B Circuit Low
Trans Fluid Press Sensor/Switch B Circuit High
Trans Fluid Press Sensor/Switch B CKT Intermittent
Park/Neutral Switch Input Circuit
Park/Neutral Switch Circuit Low Input
Park/Neutral Switch Circuit High Input
Drive Switch Input Circuit
Drive Switch Circuit Low Input
41
OBDII Generic DTC Definitions
P0855 P0856 P0857 P0858 P0859 P0860 P0861 P0862 P0863 P0864 P0865 P0866 P0867 P0868 P0869 P0870 P0871 P0872 P0873 P0874 P0875 P0876 P0877 P0878 P0879 P0880 P0881 P0882 P0883 P0884 P0885 P0886 P0887 P0888 P0889 P0890 42
Drive Switch Circuit High Input
Traction Control Input Signal
Traction Control Input Signal Range/Performance
Traction Control Input Signal Low
Traction Control Input Signal High
Gear Shift Module Communications Circuit
Gear Shift Module Communications Circuit Low
Gear Shift Module Communications Circuit High
TCM Communications Circuit
TCM Communications CKT Range/Performance
TCM Communications Circuit Low
TCM Communications Circuit High
Trans Fluid Press
Trans Fluid Press Low
Trans Fluid Press High
Trans Fluid Press Sensor/Switch C Circuit
Trans Fluid Press Sensor/Switch C CKT Range/Performance
Trans Fluid Press Sensor/Switch C Circuit Low
Trans Fluid Press Sensor/Switch C Circuit High
Trans Fluid Press Sensor/Switch C CKT Intermittent
Trans Fluid Press Sensor/Switch D Circuit
Trans Fluid Press Sensor/Switch D CKT Range/Performance
Trans Fluid Press Sensor/Switch D Circuit Low
Trans Fluid Press Sensor/Switch D Circuit High
Trans Fluid Press Sensor/Switch D CKT Intermittent
TCM Power Input Signal
TCM Power Input Signal Range/Performance
TCM Power Input Signal Low
TCM Power Input Signal High
TCM Power Input Signal CKT Intermittent
TCM Power Relay Control Circuit Open
TCM Power Relay Control Circuit Low
TCM Power Relay Control Circuit High
TCM Power Relay Sense Circuit
TCM Power Relay Sense CKT Range/Performance
TCM Power Relay Sense Circuit Low
OBDII Generic DTC Definitions
P0891 P0892 P0893 P0894 P0895 P0896 P0897 P0898 P0899 P0900 P0901 P0902 P0903 P0904 P0905 P0906 P0907 P0908 P0909 P0910 P0911 P0912 P0913 P0914 P0915 P0916 P0917 P0918 P0919 P0920 P0921 P0922 P0923 P0924 P0925 P0926 TCM Power Relay Sense Circuit High
TCM Power Relay Sense CKT Intermittent
Multiple Gears Engaged
Transmission Comp. Slipping
Shift Time Too Short
Shift Time Too Long
Transmission Fluid Deteriorated
Transmission Ctrl. MIL Request Circuit Low
Transmission Ctrl. MIL Request Circuit High
Clutch Actuator Circuit Open
Clutch Actuator CKT Range/Performance
Clutch Actuator Circuit Low
Clutch Actuator Circuit High
Gate Select Position Circuit
Gate Select Position CKT Range/Performance
Gate Select Position Circuit Low
Gate Select Position Circuit High
Gate Select Position CKT Intermittent
Gate Select Control Error
Gate Select Actuator Circuit Open
Gate Select Actuator CKT Range/Performance
Gate Select Actuator Circuit Low
Gate Select Actuator Circuit High
Gear Shift Position Circuit
Gear Shift Position CKT Range/Performance
Gear Shift Position Circuit Low
Gear Shift Position Circuit High
Gear Shift Position CKT Intermittent
Gear Shift Position Control Error
Gear Shift Forward Actuator Circuit Open
Gear Shift Forward Actuator CKT Range/Performance
Gear Shift Forward Actuator Circuit Low
Gear Shift Forward Actuator Circuit High
Gear Shift Reverse Actuator Circuit Open
Gear Shift Reverse Actuator CKT Range/Performance
Gear Shift Reverse Actuator Circuit Low
43
OBDII Generic DTC Definitions
P0927 P0928 P0929 P0930 P0931 P0932 P0933 P0934 P0935 P0936 P0937 P0938 P0939 P0940 P0941 P0942 P0943 P0944 P0945 P0946 P0947 P0948 P0949 P0950 P0951 P0952 P0953 P0954 P0955 P0956 P0957 P0958 P0959 P0960 P0961 P0962 44
Gear Shift Reverse Actuator Circuit High
Gear Shift Lock Solenoid Ctrl Circuit Open
Gear Shift Lock Solenoid Ctrl CKT Range/Performance
Gear Shift Lock Solenoid Ctrl Circuit Low
Gear Shift Lock Solenoid Ctrl Circuit High
Hydraulic Pressure Sensor Circuit
Hydraulic Pressure Sensor CKT Range/Performance
Hydraulic Pressure Sensor Circuit Low
Hydraulic Pressure Sensor Circuit High
Hydraulic Pressure Sensor CKT Intermittent
Hydraulic Oil Temp Sensor Circuit
Hydraulic Oil Temp Sensor CKT Range/Performance
Hydraulic Oil Temp Sensor Circuit Low
Hydraulic Oil Temp Sensor Circuit High
Hydraulic Oil Temp Sensor CKT Intermittent
Hyd. Pressure Unit
Hyd. Pressure Unit Cycling Too Short
Hyd. Pressure Unit Loss of Pressure
Hyd. Pump Relay Circuit Open
Hyd. Pump Relay CKT Range/Performance
Hyd. Pump Relay Circuit Low
Hyd. Pump Relay Circuit High
Auto Shift Adaptive Learning Not Complete
Auto Shift Manual Control Circuit
Auto Shift Manual Control CKT Range/Performance
Auto Shift Manual Control Circuit Low
Auto Shift Manual Control Circuit High
Auto Shift Manual Control CKT Intermittent
Auto Shift Manual Mode Circuit
Auto Shift Manual Mode CKT Range/Performance
Auto Shift Manual Mode Circuit Low
Auto Shift Manual Mode Circuit High
Auto Shift Manual Mode CKT Intermittent
Pressure Control Solenoid A Control Circuit Open
Pressure Control Solenoid A Control CKT Range/Performance
Pressure Control Solenoid A Control Circuit Low
P0963 P0964 P0965 P0966 P0967 P0968 P0969 P0970 P0971 P0972 P0973 P0974 P0975 P0976 P0977 P0978 P0979 P0980 P0981 P0982 P0983 P0984 P0985 P0986 P0987 P0988 P0989 P0990 P0991 P0992 P0993 P0994 P0995 P0996 P0997 P0998 P0999 OBDII Generic DTC Definitions
Pressure Control Solenoid A Control Circuit High
Pressure Control Solenoid B Control Circuit Open
Pressure Control Solenoid B Control CKT Range/Performance
Pressure Control Solenoid B Control Circuit Low
Pressure Control Solenoid B Control Circuit High
Pressure Control Solenoid C Control Circuit Open
Pressure Control Solenoid C Control CKT Range/Performance
Pressure Control Solenoid C Control Circuit Low
Pressure Control Solenoid C Control Circuit High
Shift Solenoid A Control CKT Range/Performance
Shift Solenoid A Control Circuit Low
Shift Solenoid A Control Circuit High
Shift Solenoid B Control CKT Range/Performance
Shift Solenoid B Control Circuit Low
Shift Solenoid B Control Circuit High
Shift Solenoid C Control CKT Range/Performance
Shift Solenoid C Control Circuit Low
Shift Solenoid C Control Circuit High
Shift Solenoid D Control CKT Range/Performance
Shift Solenoid D Control Circuit Low
Shift Solenoid D Control Circuit High
Shift Solenoid E Control CKT Range/Performance
Shift Solenoid E Control Circuit Low
Shift Solenoid E Control Circuit High
Trans Fluid Press Sensor/Switch E Circuit
Trans Fluid Press Sensor/Switch E CKT Range/Performance
Trans Fluid Press Sensor/Switch E Circuit Low
Trans Fluid Press Sensor/Switch E Circuit High
Trans Fluid Press Sensor/Switch E CKT Intermittent
Trans Fluid Press Sensor/Switch F Circuit
Trans Fluid Press Sensor/Switch F CKT Range/Performance
Trans Fluid Press Sensor/Switch F Circuit Low
Trans Fluid Press Sensor/Switch F Circuit High
Trans Fluid Press Sensor/Switch F CKT Intermittent
Shift Solenoid F Control CKT Range/Performance
Shift Solenoid F Control Circuit Low
Shift Solenoid F Control Circuit High
45
NOTES:
45
NOTES:
47
1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal
rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of
warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and service. A
defective product may be returned for a free replacement within 90 days from the date of purchase, provided that product is returned to place of
purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace
at no charge any parts which our examination shall disclose to be defective and under warranty. These warranties shall be valid only when a
sales receipt showing the date of purchase accompanies the defective product or defective part(s) being returned. For part(s) after 90 days,
please remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal use
and service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which has been
repaired or altered in any way so as to affect adversely its performance or reliability, nor shall these warranties apply to any product or part
which has been subject to misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied
warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability and no
implied warranty of fitness for any particular purpose, except that for goods purchased primarily for personal, family or household use and not
for commercial or business use, PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an
implied warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the duration, expressly
warranted above. The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any
product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be the
repair, or replacement thereof as provided above. The laws on limitation of remedies or on consequential, incidental or special damages may
vary from state to state, so the above limitations may not apply in all cases.
© Copyright 2014 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement