Ariston NEW 60 cm PLATFORM Refrigerator Service Manual
NEW ARISTON 60 cm PLATFORM is a refrigerator with a variety of features. The refrigerator offers the user the possibility to select different temperatures for different compartments. The fridge offers a variable temperature compartment which can be used for chilling certain types of food.
Advertisement
Advertisement
SERVICE MANUAL
NEW ARISTON 60 cm PLATFORM
E
N
All the parts included in this document are the property of Indesit Company S.p.A.
All rights reserved. This document and all the information contained in it are supplied without responsibility for possible errors or omissions and no part of it can be reproduced, used or removed without written permission or a contractual clause.
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
1
E
N
Contents of the Manual: Note for the Engineer.
This manual is a supporting document for technical personnel. It contains a description of the various product types, the general operating principles and indications concerning assistance.
Technical personnel should, in any case, consult the specific model on
(www.servicenet. indesitcompany.com) to access data and updates of electrical diagrams, technical bulletins and spare parts.
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
2
CONTENTS
Legend
Interfaces
Energy Label
2.
OPERATING LOGIC
Product types
Explanation of setting and operation of control knob interfaces
Explanation of setting and operation of TOUCH control interfaces
Product characteristics
Static appliances
Full No Frost appliances
3.
COMPONENTS
4.
WIRING DIAGRAMS
Electronic thermostat wiring diagram
Full wiring diagram
5. ASSISTANCE
Demo Mode
Auto Test
Faults and Solutions
Troubleshooting
Dismantling the TOUCH interface
6.
EXPLODED VIEWS
7.
APPENDIXES
Probes Table (Temperature / Resistance)
4-6
4
5
6
7-17
7
8-10
11-14
15
16
17
18
19-22
19-20
21-22
23-25
23
23-26
27-30
31
32-34
35-45
46
46
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
3
1. PRODUCT TYPE:
1.1. ARISTON APPLIANCES LEGEND:
M B T 20 2 2 CZ -
M=Ariston B = Combi
T = Double Door
M = Mechanic
L = LED + Ele + Air
T = TOUCH + Ele + Air
P = BUTTONS + Ele + Air
15 = 150cm
17 = 175 cm
18 = 187cm
3 = A++
2 = A+
Freezer Temp.
1 = A
1 = White
2 =
Stainless steel
C = Chiller
Z = Variable
I = Integrated Everfresh
Q= Aquacare T = Tropical
L = Lock
F= No Frost
S= NF Surround
20 = 200cm 3 = Silver V = Ventilated
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
4
E
N
1.2. INTERFACE:
Electronic thermostat
Electronic Static Combi - No Frost Basic
2
Interface: Everfresh
13
1 3 4
14
5 6 7
Legend:
1. SUPER FRIDGE button
2. FRIDGE knob
3. SUPER FRIDGE indicator led
4. Power supply indicator led
5. SUPER FREEZE indicator led
6. SUPER FREEZE button
7. FREEZER knob
Interface: without Everfresh
13 14
4
2
3
7
8
9
10
11
4
2
3
7
8
9
11
6 6
12 12
1
Legend:
1. ON/OFF button
2. VARIABLE TEMPERATURE
COMPARTMENT temperature selector
3. FREEZER COMPARTMENT
temperature selector
5
1
5
4. FRIDGE COMPARTMENT
temperature button
5. “I CARE” button
6. “HOLIDAY” button
7. “RESET ALARM” button
8. “SUPER FRIDGE” button
9. “SUPER FREEZE” button
10. “EVER FRESH” button
11. “ICE PARTY” button
12. FREEZER display
13. FRIDGE display
14. VARIABLE TEMPERATURE
COMPARTMENT display
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
5
1.3. ENERGY LABEL:
Energy Label for appliances:
Ariston
XXX
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
6
2. PRODUCT TYPE
2.1 ARISTON DOUBLE DOOR,
ELECTRONIC THERMOSTAT:
2.2 ARISTON COMBI,
ELECTRONIC THERMOSTAT:
E
N
Consult Indesit New Cold Platform Manual.
Operation is identical or similar to equivalent
Indesit appliance.
Consult Indesit New Cold Platform Manual.
Appliance operation is the same as the Indesit brand appliance.
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
7
E
N
2.3 APPLIANCES WITH CONTROL KNOB INTERFACE
2.3.1 “FREEZER KNOB” FUNCTIONS:
Switching the appliance ON/OFF:
The freezer knob is used for switching the appliance on/off. In the“OFF” position, the appliance is switched off (Logical Off). Turn the knob clockwise to switch the refrigerator on.
To switch it off, turn the knob anti-clockwise to
Off (Virtual Off).
Activation/Setting of the C.C.Z. variable temperature compartment (where available) and/or Freezer compartment temperature setting:
In appliances with knob controls, temperature setting of the variable temperature compartment and of the freezer compartment are interdependent, since both are adjusted with the same control knob.
The first half of the knob’s range activates the variable temperature compartment (C.C.Z.) and the freezer compartment temperature will be approx. -18°C.
For C.C.Z. temperature setting the user has three options:
• STRAWBERRY symbol, sets temperature to
-8°C.
• ICE CREAM symbol, sets temperature to approx. -12°C.
• BOTTLE symbol: sets temperature to approx.
-18°C.
If the knob is set past the half way mark (after the bottle), the C.C.Z. switches off and the relative drawer can be used as an additional standard freezer drawer.
To select the lowest temperatures, turn the knob clockwise (past the half-way mark). To select the higher temperatures, turn anti-clockwise (to the section next to the bottle symbol).
Note.: to activate the I CARE function, the fridge and freezer knobs must both be set to the I CARE position.
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
8
E
N
2.3.2 FRIDGE COMPARTMENT KNOB:
The fridge compartment knob is used for switching the refrigerator compartment on/off. If the knob is set to OFF, the fridge compartment is switched off. Turn the knob clockwise (away from the OFF position) to switch the fridge compartment on.
To switch it off, turn the knob anti-clockwise to the OFF position.
To select the lowest temperatures, turn the knob clockwise. Turn anti-clockwise to select the higher temperatures.
The refrigerator knob is also used to select the
Holiday function (two beeps signal activation, one beep signals deactivation), indicated with a beach umbrella symbol (the function on this platform has the same characteristics as the
Indesit New Electronic Cold Platform - Consult manual).
2.3.3 SUPER FREEZE BUTTON:
The Super Freeze button is used for activating/ deactivating the Super Freeze function for 24 /
48 hours for static appliances and for 24 hours for
No Frost appliances.
To activate the 24 hour Super freeze function on static appliances, press the relative button, the indicator led will light up steady. This function operates with the same logic as appliances in the
Indesit New Electronic Cold Platform (consult manual). The function is deactivated automatically when the maximum time has elapsed (24 hours) or once a given temperature has been reached and maintained for a time interval parameterised in the EEPROM memory.
To activate the 48 hour Super freeze function, press and hold the button for 3 seconds. The led
When this function is selected, the fridge compartment will be thermostat-controlled at around 12°C and the freezer compartment will be approx. -18°C.
Note.: to activate the I CARE function, the fridge and freezer knobs must both be set to the I CARE position.
will flash to indicate that the function has been activated and will continue to flash for the first
24 hours, after which it will remain lit steady for the last 24 hours. This function has the same characteristics as appliances in the Indesit New
Electronic Cold Platform (consult manual).
The function is deactivated automatically at the end of the 48 hours.
On No Frost products, the Super Freeze function can only be set for 24 hours. The function is activated by pressing the relative button and is deactivated automatically when the maximum time has elapsed (24 hours) or once a given temperature has been reached and maintained for a time interval parameterised in the EEPROM memory.
With both appliances, the function can be deactivated: by pressing the relative button again or switching off the appliance. In the event of a power failure while the function is activated, when the power is restored the PCB (which controls the function), will reactivate it, completing the remaining hours. In the event of an alarm mode, the function cannot be activated and if already active, the PCB will automatically deactivate it.
The Super Freeze function cannot be activated together with the Holiday function.
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
9
2.3.4 SUPER FRIDGE OR EVER FRESH BUTTON (depending on model):
To activate the Super Fridge function, press the relative button, the corresponding Led will light up to signal activation. The function is deactivated automatically upon completion of the cycles parameterised for this function on the PCB.
The function can be deactivated: by pressing the relative button again or switching off the refrigerator compartment or appliance.
In the event of a power failure while the function is activated, when the power is restored, the PCB
(which controls the function), will reactivate it from where it was interrupted.
In the event of an alarm mode, the function cannot be activated and if already active, the PCB will automatically deactivate it.
The function cannot be activated if the Holiday function is already active.
In other models with control knob interface, where available, this button is also used to activate the Ever Fresh function. For further information on the operation of this function, see chapter PRODUCT CHARACTERISTICS.
2.3.5 LEDs:
The appliances has 3 leds (from left to right):
1. Super Fridge (Ever Fresh) led which lights up when the user activates the Super Fridge function or, on some models (where featured), lights up when the user activates the Ever
Fresh function.
2. Appliance Powered led which lights up automatically when the appliance is connected to the power supply.
3. Super Freeze led which lights up steady when the user activates the 24 hour Super Freeze function and flashes when the user activates the 48 hour Super Freeze function (only available on static appliances).
Another function of the Leds is to alert the user and/or technician to any Faults (see Assistance
chapter - Fault Table).
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
10
E
N
2.4 APPLIANCES WITH TOUCH INTERFACE:
2.4.1 Switching the appliance ON/OFF:
To switch the appliance ON, press the Power ON button. The led changes from red to green and the
I CARE function is automatically activated. The display shows the temperatures for the fridge and freezer compartments (+ 5 and -18 respectively) and the AUTO led lights up, the ICE CREAM function of the CCZ.
The user can now change/personalise settings.
To switch the appliance off, press the power button for two seconds. The corresponding led changes colour (from green to red) and all the control panel leds switch off.
2.4.2 SWITCHING THE FRIDGE
COMPARTMENT ON/ OFF:
The fridge compartment switches on automatically when the appliance is switched on
(see previous paragraph).
The refrigerator compartment can be switched off by then pressing the “-” button, the temperature will reach +2°C, press again and the display will show “- -”, indicating that the compartment is switched off. To switch it back on again, press
“+”, the display will show +2°C, continue pressing the button to obtain the desired temperature.
2.4.3 SETTING FUNCTIONS:
All available functions are highlighted on the control panel with special symbols.
To activate a function, simply press the relative button; the corresponding led will light up to indicate that the function has been selected.
Those functions having a duration parameterised in the EEPROM memory will end once the exit conditions are met or, when the function button is pressed again.
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
11
E
N
2.4.4 SETTING FRIDGE AND FREEZER TEMPERATURE:
When the appliance is switched on, the I CARE function is automatically activated (see details of
I CARE function) and the display shows +5°C for the fridge compartment and -18°C for the freezer compartment. The AUTO led lights up.
To change the temperatures simply press the “+” or “-” button next to the relative display (fridge or freezer display) to increase or decrease the temperature of the desired compartment. When the temperature in one of the compartments is changed, the “AUTO” led switches off.
2.4.5 ACTIVATING THE VARIABLE TEMPERATURE COMPARTMENT (C.C.Z.):
When the appliance is switched on, the variable temperature compartment is activated and the display shows the ICE CREAM symbol (-12°C).
Press the arrow (left of the symbol) to change the setting and select the desired temperature or to switch off the compartment (in this case, no symbol will remain lit) and use it as simply another freezer drawer.
The setting options for this compartment are as follows:
a. STRAWBERRY symbol, for a temperature of -
8°C.
b. ICE CREAM symbol, maintains the C.C.Z.
temperature at approx. -12°C and,
3. BOTTLE symbol, for a temperature of approx. -18°C.
4. All leds switch off, which means the compartment operates as a normal freezer drawer.
2.4.6 APPLIANCE SPECIAL FUNCTIONS
HOLIDAY Function:
For details of this function, see the Indesit New Electronic Cold Platform manual.
When the Holiday function is active, the Ever Fresh function can be activated, the temperature in the variable temperature compartment can be changed and the child lock can be activated/ deactivated.
ICE PARTY Function:
This function enables the user to chill a bottle (Champagne, wine, ...) in the freezer compartment as quickly as possible. The appliance will force the compressor to run continuously in order to have the maximum refrigerating power and rapidly chill the bottle. After 30 minutes, the time parameterised in the EEPROM for this function, the display and an acoustic signal alert the user to remove the bottle in order to prevent it from breaking.
The function is activated by pressing the corresponding function button. The function is deactivated at the end of the set time or by pressing the function button again, after which the appliance will continue with normal operation.
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
12
At the end of the function, when end of function conditions are met, the appliance emits an acoustic signal and the led starts flashing, alerting the user to remove the bottle. To exit the function, the user must press the button until the function led indicator stops flashing.
The function cannot be activated in an alarm condition or in tandem with the HOLIDAY function. Activation of the HOLIDAY function automatically deactivates the ICE PARTY function and activates the corresponding buzzer and led, prompting the user to remove the bottle.
The I CARE or SUPER FREEZER functions can be activated but will start at the end of the ICE PARTY function.
IMPORTANT: In the event of a power failure during the I CARE function, when the power supply is restored the function will not be reactivated and the end of function signal will be activated immediately.
Super Freeze Function:
See the Super Freeze function of the Indesit New Electronic Cold Platform (24 hour version for
No Frost models and 24/48 hour version for Static models).
Super Fridge Function:
See the Super Fridge function of the Indesit New Electronic Platform.
Child Lock:
The Child Lock function is designed to prevent accidental changes to appliance settings.
To activate the function, press and hold the “Alarm” button for two seconds, the display shows
“LO CH” and the buzzer emits a short beep. The appliance shows “LO CH” on the display for the time parameterised in the EEPROM memory while the function remains active.
The function is deactivated by pressing the “Alarm” button again for two seconds. The buzzer beeps and the message “CH OF” appears on the display, confirming exit from the function.
In the event of a temperature alarm, an Ever Fresh or door open alarm, or if the ICE-PARTY function ends or a Fault is detected, these situation take priority, halting and deactivating the Child Lock. When the alarm situation is over, the Child Lock function WILL NOT be reactivated automatically.
In the event of a power failure, when power is restored the function will be reactivated automatically.
I CARE:
For appliances with control knob interface, the I CARE function, featured on the Ariston New
Electronic Cold Platform, is identical to the ECO function on the Indesit New Electronic Cold
Platform.
For appliances with TOUCH interface, this function is activated automatically when the appliance is switched on. The Auto led also lights up automatically, only switching off if and when the user changes the preset temperature.
If the user changes the temperature and later reverts to the temperatures managed by I CARE manually, the Auto led will not light up again and the PCB will not switch the solenoid valve before switching off the compressor at the end of the cooling demand from the fridge compartment. In short, the appliance will operate as a normal appliance with normal temperature settings. To once again activate function, the user must set the I CARE function by pressing the relative button.
The temperature bands can be changed without exiting the I CARE function.
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
13
To do this, hold the function button down and, at the same time, press the temperature change buttons for the desired compartment. The variation options are:
Fridge compartment: +4°C, +5°C, +6°C.
Freezer compartment: -18°C, -19°C, -20°C.
EVER FRESH (Where available):
This function enables the user to store vacuum packed food for a prolonged period of time.
Before pressing the button to select the function, the user must set the ring of the container to
“Vacuum empty” and insert the container in the allotted space, pulling the internal button on the shelf and activating Ever Fresh function with the button. When the user activates the function
(pressing the function button with the appliance on), the PCB activates a TRIAC which in turn switches on the vacuum pump.
The function is deactivated automatically when the PCB receives Feed Back from the vacuum switch indicating that air has been removed from the container, or by pressing the Ever Fresh button again or switching off the fridge compartment (only for appliances with control knobs) or the entire appliance. In the event the vacuum pump continues running, for a period of time established as the maximum parameter, the pump will be deactivated and the function will enter alarm mode.
In appliances with Led interface, when in alarm mode the relative Led will flash and the buzzer will beep twice. In appliances with TOUCH interface the Led will change colour (from blue to red), it will also start flashing and the buzzer will beep twice. In both cases, to reset the alarm simply press the Ever Fresh button.
Note.: entering alarm mode automatically results in deactivation of the function. This function does not interact with other appliance functions and cannot be activated when the appliance is switched off.
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
14
E
N
2.5 PRODUCT CHARACTERISTICS:
SURROUND:
The innovative SURROUND refrigeration system featured on all Ariston Full No Frost refrigerators guarantees a uniform temperature throughout the refrigeration compartment thanks to numerous ventilation cells.
It is easy to identify since inside the fridge an extension of the multiflow which reaches to the very roof of the compartment is clearly visible.
The Surround system It is managed by the appliance’s main PCB which controls a stepper type electronic damper with three positions:
a. Closed: when there is no cooling demand from the fridge compartment. In this case there is no air circulation inside the compartment.
b. Open 45°: which allows circulation of air through the multiflow column. This grading occurs when the user selects any function other than I CARE or
Super Fridge, and therefore, the SURROUND system is not activated.
c. Open 90°: In this case the SURROUND system is active and the four vents are operational (with air flow). The electronic circuit board will open the
Damper at 90°. The SURROUND system will be activated by the PCB automatically if the user has set the I CARE and/or Super Fridge function on the control panel.
Control Care Zone (C.C.Z.):
-12°C represented by the ICE CREAM and, -18°C represented by a BOTTLE.
Note.: with C.C.Z. switched off, the drawer in question operates as a normal freezer compartment drawer, both in Static and No
Frost appliances.
The Control Care Zone (C.C.Z.) or variable temperature compartment is an area of the freezer (top drawer) which allows the user to set a different temperature compared to the rest of the freezer compartment (which will operate as a normal freezer). The setting options are: -8°C represented by the STRAWBERRY symbol,
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
15
E
N
2.6 STATIC APPLIANCES:
To introduce this technology in static appliances, the following thermodynamic changes had to be made: There are two solenoid valves instead of one, physically positioned in “series” (cascade connection), and three capillary tubes as opposed to two; all electronically controlled as follows:
E.V.1-ON / E.V.2-Off (Capillary 1):
The gas is sent first to the fridge evaporator and then to the freezer evaporator, as in traditional models.
E.V.1-Off / E.V.2-Off (Capillary 2):
Here the gas is sent only to the freezer compartment (not to the CCZ).
E.V.1-Off / E.V.2-On (Capillary 3):
In this case, the gas is sent first to the variable temperature compartment and then to the freezer compartment.
2 flags
1 flag
Gas in
2 flags
Capillary 3: TVZ+Fz
Capillary 2: Fz
Capillary 1: Fr+Fz
1 flag
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
16
2.7 FULL NO FROST APPLIANCES:
In Full No Frost appliances, a secondary On/Off type damper (different from the stepper type used in the fridge compartment) has been fitted; when there is a cooling demand from the variable temperature compartment (C.C.Z.), the PCB activates the compressor and after a period of time parameterised in the EEPROM memory it activates the fan and opens the damper, thus cooling the latter.
The setting options are: -8°C represented by a
STRAWBERRY, -12°C represented by an ICE
CREAM and, -18°C represented by a BOTTLE.
In the case of defrosting, there is a pre-defrosting procedure when the fan is activated and the damper is opened for a period of time parameterised in the eeprom memory.
For the defrosting characteristics/procedure, consult the Indesit New Cold Platform manual.
After defrosting, the compressor continues running for a period of time prior to the opening of the secondary damper in order to prevent circulation of any warm air.
Damper ON-OFF
Variable temp.
comp. drawer
Polystyrene conveyor 1
Position air probe variable temp. comp.
(located inside refrigerator)
Support 2
Conveyor 1
Damper connection housing
Base FZ
L shaped separator
Cold air from base to damper
Cold air from damper to vents
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
17
E
N
3. COMPONENTS:
ELECTRONIC THERMOSTAT NO FROST COMBI.
Damper Display PCB
Variable temperature compartment separator panel
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
18
4. WIRING DIAGRAMS:
Legend
AC Power supply
CO
PT
C
RH
Compressor
Starter relay
Running condenser (where fitted)
Klixon thermoprotector
VZ NF freezer fan
R1, R2 Defrosting element
TF
TP
Thermo fuse
Thermoprotector
IF
LR
S
Fridge door button/magnetic reed
Fridge light
Fridge air probe
S
IF
LR
VZ
RH
CO
C
PT
AC
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
TP
R2
R1
Edition
2006.06.15
TF
Language
English
19
Wiring diagram for Combi No Frost
A
B
C
D
E
Thermo fuse
Thermoprotector
Evaporator element
Drip tray element
Freezer fan
Wiring Diagram Double Door No Frost
A
B
C
D
E
Thermo fuse
Thermoprotector
Evaporator element
Drip tray element
Freezer fan
CONNECTIONS
W 1
W 2
W 3
PROBES
COMBI
NO-FROST
MECHANICAL
YES
YES
YES WITHOUT IF
YES
DOUBLE DOOR
NO-FROST
MECHANICAL
YES
YES
YES
YES
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
20
4.2 FULL WIRING DIAGRAM
Legend
AC Power supply
IF
LR
VR
LZ
E2
CO
PT
C
RH
Compressor
Starter relay
Running condenser (where fitted)
Klixon thermoprotector
E1
VZ
Solenoid valve
NF freezer fan
R1, R2 Defrosting element
T1, T2 Thermo fuse
VA
D1
Fridge door button/magnetic reed
Fridge light
AIR fridge fan
Freezer light
Variable temperature compartment solenoid valve
Vacuum switch (no measurable signal)
Variable temperature compartment damper on/off switch (J7 pin 1-3 power supply 100V, pin 4-5 open/close reed limit switch)
PV
D2
S
UI
S1
S2
S3
S4
Vacuum pump
Stepper damper (12V signal not measurable)
Serial line
Interface card with microprocessor
(J13 pin 3-4 power supply 12V, with ref. to 220V do not touch the powered card)
Evaporator probe (fridge for static models, freezer for NF)
Fridge air probe
Freezer air probe
Variable temperature compartment air probe
S4
S1
S2
S3
4 3 2 1
UI
D2
2
1
4
3
PV
1 2
3
4 5 6
1 2 3 4
J11 J13
S
2 1
1 2 3 4 5
J3 J4
AC
c m
CO
s
PT
RH
C
D1
VR
IF
LR
VA
E2
LZ
VZ
E1
R1
T1
R2
T2
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
21
E
N
Solenoid valve diagram for variable temperature compartment (CCZ)
A
B
C
Capillary 1: Fridge fridge
Capillary 2. Freezer
Capillary 3: Special compartment + Freezer
EV2
2 flags
Gas in
EV1
1 flag
Wiring diagram for Combi No Frost
A
B
C
D
E
Thermo fuse
Thermo fuse
Evaporator element
Drip tray element
Freezer fan
CONNECTIONS
J 1
J 2
J 3
J 4
J 5
J 6
J 7
J 8
J 9
J 10
J 11
J 12
J 13
STATIC
CCZ
TOUCH
YES
YES
----
----
YES
----
STATIC
CCZ
UI LED
YES
AIR (1-3)
LAMP. FR (4-6)
----
----
YES
----
----
YES
----
----
YES
VS AIR PROBE
(3-4)
YES
----
YES
----
----
YES
VS AIR PROBE
(3-4)
YES
NO-FROST
CCZ
EF TOUCH
YES
LAMP. FR (4-6)
INT. FR (4-6)
YES
YES
----
DEFROST.EL.
FREEZ.FAN
(3-4) (5-6)
YES
----
----
VACUUM SWITCH
(5-6)
YES
VS AIR PROBE
(3-4)
YES
NO-FROST
EF
UI LED
YES
LAMP. FR (4-6)
YES
YES
----
DEFROST.EL.
FREEZ.FAN
(3-4) (5-6)
----
----
----
VACUUM SWITCH
(5-6)
YES
----
YES
A
C
B
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
22
5. ASSISTANCE:
5.1. DEMO MODE:
This mode is not available in products with
Electronic Thermostat or Control Knob
Interface.
For appliances with Touch Interface, without any great energy consumption (approx. 3 W) the
Demo Mode makes it possible to show the appliance’s full potential, so it appears as if the appliance is switched on and operating normally, but without any load.
To activate the DEMO mode, simply switch off the appliance (On/Off button) and press the I CARE
+ HOLIDAY buttons at the same time for six seconds. The fridge and freezer displays will show “dEon” and the Buzzer will beep.
To deactivate and return to normal operation, press the same buttons (I CARE + HOLIDAY) for three seconds. The displays will show “dEoF” and the buzzer will beep again.
During Demo mode, every six seconds the fridge and freezer displays will show “dEon” for around two seconds. In the event of a power failure, when power is restored the appliance will continue in
DEMO mode.
5.2. AUTO TEST:
AUTOTEST in appliances with Electronic Thermostat:
Electronic Thermostat Autotest:
The Autotest function is activated by carrying out the following movements with the thermostat knob:
E
N
1. Turn the thermostat knob to the minimum setting (applianceOFF)
2. Turn the knob from OFF to the maximum setting.
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
23
3. Turn the knob from maximum to minimum
(appliance OFF).
The function terminates automatically after 255 seconds.
AUTOTEST in Appliances with Knob
Controls:
To activate the Autotest procedure, turn the
Fridge and Freezer knobs to OFF and press the
Super Freeze button for more than 3 seconds (all the leds light up for 5 seconds).
The function terminates automatically after 255 seconds (time parameterised for the autotest) or, it can be terminated by the user by switching on the appliance using the freezer knob or by disconnecting and reconnecting the mains power supply. The buzzer emits a beep to signal activation and deactivation.
It is possible to halt or exit the AUTOTEST function by switching the appliance on with the thermostat knob or by disconnecting the appliance from the power supply and then reconnecting it.
With regard to appliance loads driven by the PCB during during the autotest procedure, any faults will be signaled by flashing of the fridge lamp.
Note.: remember the important points with regard to Autotest on these appliances.
Any faults will be signaled by flashing of the three
Leds on the control panel. As regards the sensors, any faults will be signaled by the three
Leds and the flashing of the fridge lamp at the same time.
AUTOTEST in appliances with TOUCH interface:
To activate the AUTOTEST procedure, turn the appliance off (On/Off button) and press the following buttons at the same time for six seconds: Super Cool + Super Freeze + Ice Party.
Upon activation, the red led “Ever Fresh” (where featured) lights up for 2 seconds, after which all the leds light up for 5 seconds (Ever Fresh blue).
The function terminates automatically after
255 seconds (time parameterised for the autotest) or, it can be terminated by the user by switching on the appliance (pressing the On/Off button) or by disconnecting and reconnecting the mains power supply. The buzzer emits a beep to signal activation and deactivation.
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
24
5.3 AUTOTEST SEQUENCE:
Model: ELECTRONIC THERMOSTAT
Duration of Autotest procedure: 255 seconds.
Test sequence: 1. test defrosting element (8 seconds) pause 3 seconds
2. test freezer air probe (8 seconds) pause 3 seconds
3. test freezer fan (8 seconds) pause 3 seconds
Fault signalling:
4. Element and fan on for approx. 230 seconds.
After each step the appliance light switches on steady to indicate that the test detected no faults, or flashing to indicate faults.
Note. do not forget the important points for correct autotest sequence
(e.g.: the Freezer compartment temperature must be below -10°C).
Model: COMBI NO-FROST BASIC
Duration of Autotest procedure: 255 seconds.
Test sequence:
Fault signalling:
The probes are tested for the first 5 seconds. 10 seconds after Autotest activation, the freezer fan and defrost elements switch on and remain in operation until the end of the test. 10 seconds after activation of the Autotest, the electronic damper is opened for 125 seconds and then closes again at the end of the autotest.
Any faults are signaled by a specific combination of leds on the interface. In the event of Probe faults, the fridge lamp will also flash.
Model: COMBI STATIC BASIC
E
N
Duration of Autotest procedure: 255 seconds.
Test sequence:
Fault signalling:
The probes are tested for the first 5 seconds of the procedure. 10 seconds after
Autotest activation, the freezer fan switches on and runs until the end of the procedure.
Any faults are signalled by a specific combination of leds on the interface. In the event of Probe faults, the fridge lamp will also flash.
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
25
E
N
Model: COMBI STATIC BASIC with CCZ
Duration of Autotest procedure: 255 seconds.
Test sequence:
Fault signalling:
The probes are tested for the first 5 seconds of the procedure. 10 seconds after
Autotest activation, the freezer fan switches on and runs until the end of the procedure.
Fault signalling: Any faults are signalled by a specific combination of leds on the interface. In the event of Probe faults, the fridge lamp will also flash.
Model: COMBI STATIC TOUCH with CCZ
Duration of Autotest procedure: 255 seconds.
Test sequence:
Fault signalling:
The probes are tested for the first 5 seconds of the procedure. 10 seconds after Autotest activation, the freezer fan switches on and runs until the end of the procedure.
Any faults are signalled on the fridge and freezer displays (e.g. F01). In the event of Probe faults, the fridge lamp will also flash.
Model: COMBI NO-FROST TOUCH with CCZ and Ever Fresh
Duration of Autotest procedure: 255 seconds.
Test sequence:
Fault signalling:
The probes are tested for the first 5 seconds. 10 seconds after Autotest activation, the freezer fan and defrost elements switch on and remain in operation until the end of the test. 10 seconds after activation of the Autotest, the electronic damper is opened for 125 seconds and then closes again at the end of the autotest. 10 seconds after activation of the Autotest, the electronic damper in the variable temperature compartment is opened for 125 seconds and then closes again at the end of the autotest.
Any faults are signalled on the fridge and freezer displays (e.g. F01). In the event of Probe faults, the fridge lamp will also flash.
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
26
E
N
5.4 LED INDICATED FAULTS AND SOLUTIONS:
1 2 3
Legend: 1 = LED 1; 2 = LED 2; 3 = LED 3;
Reading of faults shown by LEDs
The control panel LEDs light up, to signal the fault, according to the following table (the LEDs stay on while the fault lasts).
Faults
F05
F06
F07
F08
F01
F02
F03
F04 off on off on
Flashing on off
Flashing
F09
F12
F14
F21
Flashing off on on
F22
F23
Flashing
Flashing
F24
F25 off on
Table. Led Faults Blocking Faults
LED 1
Signal
LED 2
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing off off on on on on off
Non-blocking Faults
Flashing on on
Flashing on
Flashing
Flashing
Flashing off off on on on
Flashing
Flashing off
LED 3
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
27
FAULT
F1
F2
F3
F4
F5
F6
F7
F8
F9
CAUSE CORRECTIVE ACTIONS
Compressor relay sticking
Compressor relay open
- Check for water leaks that may affect connector J1 causing the relative contacts to short;
- Check motor terminal board (possible problems due to incorrect connection which may cause short-circuits);
- Renew motor;
- Renew PCB.
- Check effi ciency of contacts on connector J1 on the PCB;
- Check on wiring connector J1 between pins 3 and 2 for an impedance value that is compatible with the value given in the specifi c table.
- Check that the compressor is not stopped due to overtemperature conditions (thermal cutout open)
- Renew motor;
- Renew PCB.
Faulty power board
Freezer fan unit does not run
- Check effi ciency of contacts on connector J6 on the PCB;
- Check impedance on wiring connector J6 between pins 2 and 1 checking that the value is compatible with the value given in the relevant table;
- Check correct connection of the freezer fan on the freezer compartment wiring junction box;
- Renew freezer fan unit;
- Renew PCB.
Electronic damper does not close/open
- Check effi ciency of J3 connector contacts on PCB;
- Check effi ciency of connection of electronic damper at foam protected connector behind multifl ow;
- Renew electronic damper;
- Renew PCB.
Triac driving defrost heating element short-circuit
No power draw of defrost heating element
- Check effi ciency of contacts on connector J6 on the PCB;
- Check condition by checking for impedance on wiring connector J6 pins 3 and 4;
- Check connections of the defrost heating elements and possible short circuits on the freezer compartment wiring junction box;
- Renew heating element.
- Renew PCB
- Check effi ciency of contacts on connector J6 on the PCB;
- Check for continuity of the defrost heating element on pins 3 and 4 of connector J6, ensuring that the impedance value read is compatible with the value given in the relevant table;
- Check for correct connection of the defrost heating element and the drip tray heating element on the freezer compartment wiring junction box;
- Check the correct impedance value on the defrost heating element across the heating element terminals;
- Check that the fuses have not blown;
- Renew defrost heating element;
- Renew PCB.
Incorrect switching of solenoid valve
- Check effi ciency of contacts on connector J8 on the PCB;
- Check for impedance on wiring connector J8 pins 1 and 2 and ensure that the value is compatible with the value given in the relevant table;
- Check correct switching of the solenoid valve With the compressor running, check that the solenoid valve switches when the refrigerator compartment is set to OFF.
- Renew solenoid valve;
- Renew PCB.
File setup error (EEPROM not programmed or faulty)
- In the case of a production PCB, renew PCB and EEPROM;
- In the case of replacement PCB and EEPROM, check correct insertion of EEPROM in
PCB socket.
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
28
E
N
FAULT CAUSE CORRECTIVE ACTIONS
F10
F12
No communication between display PCB and control PCB
For LED interface PCB:
- Check effi ciency of contacts on connector J13 on PCB;
- Check continuity of connector J13 / LED PCB 5-way and 7-way connectors;
- Renew main PCB;
- Renew display PCB;
For Indesit digit interface PCB and Ariston LED interface PCB on appliances with CCZ and/or Ever Fresh System:
- Check effi ciency of contacts on connector J13 on PCB;
- Check continuity of connector J13/ interface PCB 4-way connector;
- Renew main PCB;
- Renew display PCB.
For Touch interface PCB:
- Check effi ciency of contacts on connector J13 on PCB;
- Check continuity of connector J13/interface PCB 4-way connector;
- Check continuity of connector J13/connector inside cabinet control panel;
- Check continuity of connector inside cabinet control panel / interface PCB
4-way connector;
- Renew main PCB;
- Renew display PCB.
F14
Faulty power board
- Renew PCB.
F16
NO-FROST Models: Faulty ON/
OFF DAMPER
STATIC Models with CCZ: SEC-
ONDARY SOLENOID VALVE
FAULT
NO-FROST Models: Faulty ON/OFF DAMPER
- Check effi ciency of contacts on connector J7 on the PCB;
- Check effi ciency of the damper connection to the connector inside the air duct in the variable temperature refrigerator compartment;
- Renew ON/OFF damper;
- Renew PCB.
CCZ STATIC models with SECONDARY SOLENOID VALVE fault
- Check effi ciency of contacts on connector J5 on PCB;
- Check impedance on wiring connector J5 pins 1 and 2, ensuring that the value is compatible with the value given in the relevant table;
- Check correct switching of the solenoid valve. With the compressor running, check that the solenoid valve switches when the variable temperature compartment is set to OFF.
- Renew solenoid valve;
- Renew PCB. Check
Fridge fan unit does not run
- Check effi ciency of contacts on connector J2 on PCB;
- Check for impedance on wiring connector J2 pins 3 and 1, ensuring that the value read is compatible with the value given in the relevant table;
- Check correct connection of the fridge fan inside refrigerator
compartment;
- Renew fridge fan unit;
- Renew main PCB.
F17
F20
F21
F22
Vacuum pump does not work
- Check effi ciency of contacts on connector J4 on PCB;
- Check impedance on wiring connector J4 pins 1 and 2, ensuring that the value read is compatible with the value given in the relevant table;
- Renew vacuum pump;
- Renew main PCB.
Fridge lamp fails to switch on
- Check effi ciency of contacts on connector J2 on PCB;
- Check for impedance on wiring connector J2 pins 4 and 6;
- Renew lamps;
- Renew main PCB.
NTC ambient probe UI
- Renew main PCB.
FRIDGE Air NTC probe open / short circuit
- Check effi ciency of contacts on connector J11 on the PCB;
- Check NTC probe, ensuring that the impedance value read on pins 3 and 4 of wiring connector J11 is compatible with the values in the temperature-impedance correlation table (also heat the probe by holding it with your hand where possible and checking the change in the impedance value);
- Renew main PCB.
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
29
FAULT CAUSE CORRECTIVE ACTIONS
F23
F24
FRIDGE Evaporator NTC probe open / short-circuit
- Check effi ciency of contacts on connector J11 on the PCB;
- Check NTC probe, ensuring that the impedance value read on pins 1 and 2 of wiring connector J11 is compatible with the values in the temperature-impedance correlation table (also heat the probe by holding it with your hand where possible and checking the change in the impedance value);
- Renew main PCB.
FREEZER Air NTC probe open / short-circuit
- Check effi ciency of contacts on connector J11 on the PCB;
- Check NTC probe, ensuring that the impedance value read on pins 5 and 6 of wiring connector J11 is compatible with the values in the temperature-impedance correlation table (also heat the probe by holding it with your hand where possible and checking the change in the impedance value);
- Renew main PCB.
F25
FREEZER Evaporator NTC probe open / short-circuit
- Check effi ciency of contacts on connector J11 on the PCB;
- Check NTC probe, ensuring that the impedance value read on pins 1 and 2 of wiring connector J11 is compatible with the values in the temperature-impedance correlation table (also heat the probe by holding it with your hand where possible and checking the change in the impedance value);
- Renew main PCB.
F26
CCZ Air NTC probe open / shortcircuit
- Check effi ciency of contacts on connector J12 on the PCB;
- Check NTC probe, ensuring that the impedance value read on pins 3 and 4 of wiring connector J11 is compatible with the values in the temperature-impedance correlation table (also heat the probe by holding it with your hand where possible and checking the change in the impedance value);
- Renew main PCB.
F28
Display PCB does not work
- Renew Touch display PCB
F40
“ON/OFF ” button does not work
F41
“I Care” button does not work
F42
“Holiday” button does not work
- Renew Touch display PCB
- Renew Touch display PCB
- Renew Touch display PCB
- Renew Touch display PCB
F43
“ICE PARTY” button
F44
“Ever Fresh” button
F45 “Super Freeze” button
F46 “Super Cool” button
F47
“Alarm” button
F49
FRIDGE “+” button
F50 FRIDGE “-” button
F51 CCZ button
F52
FREEZER “+” button
- Renew Touch display PCB
- Renew Touch display PCB
- Renew Touch display PCB
- Renew Touch display PCB
- Renew Touch display PCB
- Renew Touch display PCB
- Renew Touch display PCB
- Renew Touch display PCB
F53 FREEZER “-” button
- Renew Touch display PCB
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
30
E
N
5.6 Troubleshooting:
FAULT REMEDY
Fails to switch on.
Compressor runs but appliance fails to cool.
- Check voltage on mains socket outlet.
- Check power cord.
Compressor fails to start.
- Check continuity of windings.
- Check operation of Klixon relay.
- Faulty PCB.
- Appliance set to OFF.
- Compressor is cold - check refrigerant charge.
- Compressor is very hot - Check for traces of oil or refrigerant circuit is blocked.
- Check for possible faulty compressor.
Compressor unable to start.
- Faulty Klixon relay.
- Faulty compressor.
- Mains voltage too low.
Water under crisper drawers.
- Drain hole blocked.
- Container or wrapping paper touching refrigeration walls.
Water on floor.
- Condensation collection bowl ruptured.
- Water drain tube incorrectly positioned.
- Condensation collection bowl not in contact with compressor.
Compressor fails to stop.
- Faulty thermostat.
- Incorrectly positioned thermostat.
- Unsuitable electrical installation on Klixon.
- Door closure fault.
- Refrigerant circuit insufficient charge or blocked.
Compressor fails to start.
- Damaged compressor.
- Check Thermostat/PCB.
Door open alarm sounds continuously.
Display switches off occasionally.
For No-Frost:
Compartments are not very cold.
- No magnet in door.
- Faulty PCB.
- Door is distorted.
- Check display cable.
- Check display PCB.
- Evaporator coil clogged with ice.
- Check thermo fuse.
- Check heating elements.
For No-Frost: Refrigerator compartment not cold enough.
For No-Frost: Refrigerator compartment too cold - food tends to freeze.
- Chilled air suction fan motor.
- Ice has formed in the duct between the refrigerator and freezer compartments.
- Check temperature probes.
- Damper does not close properly
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
31
5.7 DISMANTLING:
5.7.1 TOUCH INTERFACE:
Removing the Display PCB:
1. Attach some adhesive tape to the bottom of the PCB to prevent damage to the panel.
4. Release the 2 screws (one top, one bottom) that secure the PCB.
2. Using a screwdriver, prise the PCB off at the bottom on each side.
5. Pull to remove the PCB and disconnect the terminals.
E
N
3. Remove the surround carefully.
Service Manual
NEW ARISTON 60 cm PLATFORM
6. PCB disconnected.
Edition
2006.06.15
Language
English
32
E
N
Removing components of the Variable Temperature Compartment:
1. Remove the drawers from the freezer compartment.
4. Release the 5 screws of the freezer damper housing.
2. Release the screws of the shelf of the variable temperature compartment.
5. Remove the damper housing, taking care not to damage the connection.
3. Remove the shelf
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
33
Removing components of the Variable Temperature Compartment:
2. Remove the shelf.
1. Release the screws of the shelf of the variable temperature compartment.
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
34
E
N
6. EXPLODED VIEWS
6.1.1 INTERNAL DETAILS
Ref.
006
006
007
007
008
009
010
011
000
000
001
002
003
003
004
005
012
013
014
015
016
017
018
019
019
Description
HANDBOOK MBT1821-2022Z (IT-GB-FR-ES-PT-PL)
HANDBOOK MBT022Z (CZ-RO-HU)
ALUMINIUM CONTROL PANEL-K22 596X55X298 “AR05”
TOP HINGE (D.9) RT-LT CHROME
TOP HINGE COVER RT ALUMINIUM-K22
TOP HINGE COVER LT ALUMINIUM-K22
COVER 75X21 CONTROL PANEL ALUMINIUM CABINET
POLARW REAR GLASS PROFILE (474x55)
GLASS SHEF (472X328X4)
CHILLER GLASS SHELF (472X270X4)
POLARW FRONT GLASS PROFILE 505X78X15
PW FRONT PROFILE CHILLER GLASS 504X42
PW REAR PROFILE/ CRISPER GLASS (L.502)
GLASS TRAY -CHILLER (478X269X4)
GLASS PROFILE CRISPER 504X78X9 POLARW
PW CHILLER WHEEL
PW CHILLER DRAWER (LXH 480X113X266)
RUNNER BUSHING PW CHILLER
DRAWER RUNNER/CHILLER RT POLARW 370X200
DRAWER RUNNER/CHILLER LT POLARW 370X200
CHILLER FRONT LIGHT GREEN-PW 480X123X30
POLARW FRIDGE SEPARATOR PANEL 497X295X22
CRISPER COVER PROFILE PW 504X93(PINS 6.5MM)
RUBBER SHEET COVER PW
GLASS CRISPER FLAP (L.491X164)
Ref.
Description
027
028
029
030
031
032
033
034
020
021
022
023
024
024
025
026
035
036
037
038
039
040
041
042
CLEAR CRISPER FRONT 492X155
CRISPER DRAWER P0LARW (465X434X137
SUPER. DRAWER POLARW (LXP 434X394x123)
SUP. DRAWER FRONT (429X155) GLASS/PW
POLARW FREEZER SEPARATOR PANEL 434X421X49
SEPARATOR RETAINER
POLARW MIDDLE DRAWER LXP 434X392
ICE TRAY (LXH)398X64 ARISTON
DRAWER FRONT (429X240) GLASS/PW
BOTTOM DRAWER POLARWH (LXP 433X227)
DRAWER FRONT (LxH 429X197) GLASS/PW
ICE SCRAPER (730412)
COMPLETE ICE PACK ARISTON
ALUMINIUM PLINTH PLUG-K22
ALUMIUM PLINTH+ DRAIN 594X72X75 “AR-05”
ADJUSTABLE FOOT D.17.7X37.5
BOTTOM HINGE (M6) RT-LT CHROME
HINGE PIN M6X (3.5+10) “SKME1650”
BOTTOM HINGE PLATE 30X40 (6 HOLES)
WHITE DRAIN PLUG D.10.5 MM “INDESIT”
FINISH COVER 56-GREY D.4.5X3M “HINGE”
CENTRAL HINGE CHROME FINISH STEEL
CONDENSATION DRAIN PIPE D.14.5X950 MM “IND”
FRIDGE CLEANING BRUSH (D.6X120) “RF-ROUND”
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
35
6.1.2 doors and components
E
N
Ref.
001
002
003
004
005
006
007
008
009
010
013
014
015
Description
ALUMINIUM PLUG (H.6.4 D.12/14)
TOP HINGE PIN M8X3 (18+2.5)
DOOR HINGE ARM (M6)
GREY BUSHING 3 MM DOOR-DRAWER DOOR
EGG COMPARTMENT LXH 500X72X103 (ARISTON)
EGG DOOR TRAY LXH 498X82X111(GLASS)
EGG HOLDER X 6 (152X95X20) GREEN GLASS
INTERM. DOOR TRAY 500X44X111(GLASS/PW)
CAN HOLDER PW/LIGHT GREEN (361X83)
BUTTER DISH (152X50X93) KIT
BOTTLE RETAINER PROFILE POLARW L=452X63
BOTTLE HOLDER DOOR TRAY 500X183 GLASS /PW
DOOR CLOSURE BUSHING RT GREY 40ø 60219...
Ref.
015
015
015
016
017
018
019
020
021
022
023
024
Description
DOOR CLOSURE BUSHING LT GREY 40ø 60219...
DOOR CLOSURE BUSHING LT GREY 49ø 00218...
DOOR CLOSURE BUSHING RT GREY 49ø 60218...
FREEZER DOOR-ARISTON STAINLESS STEEL 592X803X71
DOOR SEAL POLAR WHITE (552X713)
PLUG AL/SILVER X BUSHING H.14 D.13.8/
GREY BUSHING 4 MM “DOOR HINGE”
FRIDGE DOOR ARIS. STAINLESS STEEL 592X1140X71DISPLAY
DOOR SEAL POLAR WHITE (552X1050)
ARISTON LOGO
CONTROL PANEL COVER ALUM. DOOR 586X47(NSPIE
MAGNET. SWITCH 15X10X5 DOOR CLOSED
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
36
6.1.3 functional components
E
N
Ref.
001
002
003
004
005
006
007
008
010
011
Description Ref.
LEFT FIXTURE EVAPORATOR “C138 IND00”
RIGHT FIXTURE EVAPORATOR “C138 IND00”
WHITE PROFILE L=443.5 MM “FIX.EVAP”
FREEZ.EVAP.CONDENSER L407X473(10PIPELINES+ROUND
SOLENOID VALVE FIX.BRACKET
3-WAY SOLENOID BITRON 220/50 R134-R600
3-WAY SOLENOID BITRON 220/50 R134-R600
RUNNING CONDENSER 4MF (ATT.RAP.8MM)
POWER CORD 3X0.75 EU MM 2500
COMPRESSOR CROSSPIECE 586X110 MM UNIT.
012
013
014
015
016
017
018
019
020
Description
RUBBER DAMPER “EMBRACO EM-PW-FF”
COMPRESSOR FIXING PLATE (750908)
COMPR. HTK95AA 220-240/50 1/5HP-167W R60
LOKRING PIPE WITH VALVE (6 NFMSSV)
CONDENSATION COLLECTION TAB 209X175X58 (POLAND)
FILTER GR.12 (D.4.8/D.3.2 MM) GAS R600A
CONDENSER 576X1200x48 (R600)
WALL MOUNTED SPACER X CONDENSER “IND.00”
POWER CORD HOOK
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
37
6.1.4 OTHER COMPONENTS
E
N
Ref.
010
010
011
012
013
014
001
002
006
006
007
008
009
009
Description
MAGNETIC SENSOR SWITCH
WIRING J13E DISPLAY-MODULE
TOUCH KIT DISPLAY 60621...
TOUCH DISPLAY ROHS KIT 60622...
ALUMINIUM SURROUND TOUCH DISPLAY
ADHESIVE SPONGE TOUCH DISPLAY 415X6X3
AL. TAPE H50MMX50MT.X GLASS P.F (1PZ=1M)
LIGHT BOX (LIGHT XTRA)
LAMP HOLDER (VOSSLOH)250V E14 “GIUGIARO”
WIRING-AMP FRIDGE LAMP
LAMP 220-240V/15W (E14)
LAMP COVER (MAX 15W) COLOUR 44
FAN MOTOR SUPPORT-AIR (PW)
RUBBER STOP FAN MOTOR “NO-FROST”
Service Manual
NEW ARISTON 60 cm PLATFORM
Ref.
Description
015
016
017
018
019
020
021
022
023
024
025
026
FAN UNIT C09R1907 220V 3.5W (FATON)
FAN MOTOR SUPPORT-AIR (COMPL) PW
COVER MOTOR TURBOCOOLING “ARISTON”
PROBE FIXTURE “C238”
EEPROM COMBY2005 SW 28348120001 ST-FULL
FULL POWER BOARD WITHOUT EEPROM
COMPRESSOR WIRING
SOLEVNOID VALVE WIRING EV1
SOLENOID VALVE WIRING (EV2)
MODULE HOLDER-SMD
MODULE HOLDER COVER-SMD
SERIAL PLUG
Edition
2006.06.15
Language
English
38
E
N
6.2.1 INTERNAL DETAILS
Ref.
005
006
006
007
008
008
009
010
000
000
000
001
002
003
003
004
011
012
012
013
014
015
016
017
Description
HANDBOOK MBT1812-2012IZS (IT-GB-FR-ES-PT)
HANDBOOK MBT2012IZS (PL-RO)
QUICK REFERENCE TOUCH ARISTON
ALUMINIUM CONTROL PANEL-K22 596X55X298 “AR05”
TOP HINGE (D.9) RT-LT CHROME
TOP HINGE COVER RT ALUMINIUM-K22
TOP HINGE COVER LT ALUMINIUM-K22
COVER 75X21 CONTROL PANEL ALUMINIUM CABINET
POLARW REAR GLASS PROFILE (474x55)
GLASS SHEF-NF (472X321X4)
GLASS SHEF-NF (472X321X4) ROHS
POLARW FRONT GLASS PROFILE 505X78X15
GLASS SHEF-EVER FRESH (472X296X4)
GLASS SHEF-EVER FRESH (472X296X4) ROHS
EVER FRESH BOX POLAR WHITE COMPLETE
SUPPORT EVER FRESH BUTTON COMPLETE
RUBBER HOSE DI.4/DE.7 L=450MM
SILICON SEAL (EVER FRESH)
VACUUM ELBOW SEAL CROSS
RUNNER BUSHING PW CHILLER
DRAWER RUNNER/CHILLER LT POLARW 370X200
DRAWER RUNNER/CHILLER RT POLARW 370X200
FRIDGE SEPARATOR PANEL POLARW 497X282X30
CRISPER COVER PROFILE PW 504X93(PINS 6.5MM)
Ref.
Description
025
026
027
028
029
030
031
032
018
019
019
020
021
022
023
024
033
034
035
036
037
038
038
CHILLER WHEEL PW
RUBBER SHEET COVER PW
GLASS CRISPER FLAP (L.491X164)
CLEAR CRISPER FRONT 492X155
CRISPER DRAWER P0LARW (465X434X137
SUPER. DRAWER POLARW (LXP 434X300x123)
SUP. DRAWER FRONT (429X155) GLASS/PW
FREEZER SEPARATOR PANEL-NF POLARW 435X330X38
MIDDLE DRAWER POLARW LXP 434X300
ICE TRAY (LXH)398X64 ARISTON
DRAWER FRONT (429X240) GLASS/PW
BOTTOM DRAWER POLARWH (LXP 433X227)
DRAWER FRONT (LxH 429X197) GLASS/PW
COMPLETE ICE PACK ARISTON
ALUMINIUM PLINTH PLUG -K22
ALUMINIUM PLINTH + DRAIN 594X72X75 “AR-05”
ADJUSTABLE FOOT D.17.7X37.5
BOTTOM HINGE (M6) RT-LT CHROME
HINGE PIN M6X (3.5+10) “SKME1650”
BOTTOM HINGE PLATE 30X40 (6 HOLES)
FINISH COVER 56-GREY D.4.5X3M “HINGE”
CENTRAL HINGE CHROME FINISH STEEL
CENTRAL HINGE ZAMAK
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
39
6.2.2 DOORS AND COMPONENTS
E
N
Ref.
001
002
003
004
005
006
007
008
009
010
011
012
Description
ALUMINIUM PLUG (H.6.4 D.12/14)
TOP HINGE PIN M8X3 (18+2.5)
DOOR HINGE ARM (M6)
GREY BUSHING 3 MM DOOR-DRAWER DOOR
EGG COMPARTMENT LXH 500X72X103 (ARISTON)
EGG DOOR TRAY LXH 498X82X111(GLASS)
EGG HOLDER X 6 (152X95X20) GREEN GLASS
INTERM. DOOR TRAY 500X44X111(GLASS/PW)
CAN HOLDER PW/LIGHT GREEN (361X83)
BUTTER DISH (152X50X93) KIT
BOTTLE RETAINER PROFILE POLARW L=423X39
BOTTLE-HOLDER DOOR TRAY 500X104(GLASS/PW)
Ref.
015
015
016
017
018
019
020
021
022
023
024
Description
DOOR CLOSURE BUSHING RT GREY 40ø
DOOR CLOSURE BUSHING LT GREY 40ø
FREEZER DOOR-ARISTON STAINLESS STEEL 592X803X71
DOOR SEAL POLAR WHITE (552X713)
PLUG AL/SILVER X BUSHING H.14 D.13.8/
GREY BUSHING 4 MM “DOOR HINGE”
FRIDGE DOOR-NF AR.IX 592X1140X71 DISPLAY
DOOR SEAL POLAR WHITE (552X1050)
ARISTON LOGO
CONTROL PANEL COVER ALUM. DOOR 586X47(NSPIE
MAGNET. SWITCH 15X10X5 DOOR CLOSED
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
40
6.2.3 FUNCTIONAL COMPONENTS
E
N
Ref.
008
009
010
011
011
012
023
001
002
003
003
004
005
006
007
Description
EVAPORATOR KIT-FZ NF-26 PIPES (ELECTR)
ELEMENT KIT + THERMOFUSE 125W/72°C
EVAPORATOR SPONGE (HXLXSP) 41X43X25
EVAPORATOR SPONGE (HXLXP) 41X50X42
FAN MOTOR SUPPORT (NO FROST)
RUBBER STOP FAN MOTOR “NO-FROST”
FAN UNIT F6410 220V 3.5W (AMP-4VIE
ADHESIVE SPONGE ELBOWS NF (58X108X3)
ALUMINIUM PANEL COMBY NF
FREEZER AIR CONVEYOR KIT COMBY NF60
CONTROL PANEL COVER 74X20 CABINET POLAR-WHI
ADHESIVE SPONGE L=500X12
ADHESIVE SPONGE L=1300x12x5
FREEZER BASE KIT PW (NF) 401X530
VACUUM PUMP SUPPORT
Ref.
032
032
033
035
036
099
099
024
025
026
027
028
029
030
031
Description
VACUUM PUMP ASSEMBLY
COMPRESSOR CROSSPIECE 586X110 MM ASSEMBLY.
RUBBER DAMPER “EMBRACO EM-PW-FF”
COMPR. HTK95AA 220-240/50 1/5HP-167W R60
COMPRESSOR FIXING PLATE (750908)
LOKRING PIPE WITH VALVE (6 NFMSSV)
CONDENSATION COLLECTION TAB 209X175X58 (POLAND)
CONDENSATION DRAIN PIPE MEMBRANE DI.14 MM
FILTER GR.12 (D.1.95/D.4MM) GAS R600A “ECO”
FILTER GR10(D.1.9/4.9) R134-600 3-WAY KIT
CONDENSER IMAT 576X1200x44 (R600)
POWER CORD HOOK
CONDENSER SPACER
DEFROSTING ELEMENT 220V 28.3W (AMP)
WIRING COMBY NF (AMP) X SAT
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
41
E
N
6.2.4 OTHER COMPONENTS
Touch Display
Ref.
Description
010
011
012
013
014
015
016
017
001 MAGNETIC SENSOR SWITCH
002 WIRING J13E DISPLAY-MODULE
006
006
TOUCH DISPLAY (EVER FRESH) KIT
TOUCH DISPLAY (EVER FRESH) ROHS KIT
007
008
009
010
ALUMINIUM SURROUND TOUCH DISPLAY
ADHESIVE SPONGE TOUCH DISPLAY 415X6X3
EEPROM COMBY2005 SW 28365580001 NF-FULL
FULL POWER BOARD WITHOUT EEPROM
018
018
019
FULL POWER BOARD WITHOUT EEPROM ROHS
COMPRESSOR WIRING
VACUUM PUMP WIRING
MODULE HOLDER-SMD
MODULE HOLDER COVER-SMD
SERIAL PLUG
PROBE FIXTURE “C238”
CONDENSER FIXING PLATE
RUNNING CONDENSER 4MF (pin M8)
RUNNING CONDENSER 4MF (8MM) ROHS
POWER CORD 3X0.75 EU MM 2500
Ref.
Description
030
031
034
036
037
099
099
099
099
099
020
022
023
024
026
027
028
029
ADHESIVE SPONGE L=500X12
THERM. DAMPER FBZ118F 1W AC100V 50/60HZ
ADHESIVE SPONGE (367X324X2) WHITE
FREEZER MULTIFLOW ASSEMBLY COMBYNF-IZS
LAMP HEAT PROTECTION (80X100X0.1)
DAMPER THERMOSTAT DC12C 0.48W NSBA001RF1
DAMPER ADHESIVE SPONGE NF/ELECTRONIC
WIRING-AMP FRIDGE LAMP (SURROUND)
LAMP HOLDER (VOSSLOH)250V E14 KIT
LAMP 220-240V/10W (E14)
LAMP COVER (145X85)
MULTIFLOW ADHESIVE SPONGE NF-MECHANICAL
MULTIFLOW ASSEMBLY H.854 COMBYNF SURROUND
ADHESIVE SPONGE H=10x2 (L=75 CM)
ADHESIVE SPONGE H=55x2 (L=120 CM)
PROBES 4-WAY CONNECTOR (AMP) KIT
PROBES 6-WAY CONNECTOR (AMP) KIT
ADHESIVE SPONGE L=1300x12x5
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
42
6.3.1 INTERNAL DETAILS
E
N
Ref.
008
009
010
011
012
013
014
015
000
001
002
003
004
005
006
007
016
017
018
019
Description
HANDBOOK MBL1821Z (IT-GB-FR-ES-PT-PL)
ALUMINIUM CONTROL PANEL (ELECTRONIC) 596X55
TOP HINGE (D.9) RT-LT CHROME
COVER 75X21 CONTROL PANEL ALUMINIUM CABINET (ASO
COVER 75X21 CONTROL PANEL ALUMINIUM CABINET
POLARW REAR GLASS PROFILE (474x55)
GLASS SHEF (472X328X4)
POLARW FRONT GLASS PROFILE 505X78X15
PW REAR PROFILE/ CRISPER GLASS (L.502)
GLASS SHELF (478X328X4)
GLASS PROFILE CRISPER 504X78X9 POLARW
WINE AREA ASSEMBLY LIGHT GREEN
PROFILE AIR CLOSURE (L.423) POLAR-W
GLASS CRISPER DRAWER COVER L=478X333X4(ANG.90
GLASS PROFILE CRISPER 504X78X9 POLARW
WHITE CRISPER LXH 240X146X326 “IND4”
CLEAR CRISPER FRONT 240X159X30
SUPER DRAWER POLARW (LXP 434X394x123)
SUP. DRAWER FRONT (429X155) GLASS/PW
ADHESIVE SPONGE L=500X12
Ref.
Description
026
027
028
029
030
031
032
033
019
019
020
021
022
023
024
025
034
035
036
FREEZER SEPARATOR PANEL POLARW 434X421X49
SEPARATOR RETAINER
MIDDLE DRAWER POLARW LXP 434X392
ICE TRAY (LXH)398X64 ARISTON
DRAWER FRONT (429X240) GLASS/PW
BOTTOM DRAWER POLARWH (LXP 433X227)
DRAWER FRONT (LxH 429X197) GLASS/PW
ICE SCRAPER (730412)
ALUMINIUM PLINTH PLUG -K22
ALUMINIUM PLINTH + DRAIN 594X72X75 “AR-05”
ADJUSTABLE FOOT D.17.7X37.5
BOTTOM HINGE (M6) RT-LT CHROME
HINGE PIN M6X (3.5+10) “SKME1650”
BOTTOM HINGE PLATE 30X40 (6 HOLES)
WHITE DRAIN PLUG D.10.5 MM “INDESIT”
FINISH COVER 56-GREY D. 4.5X3M “HINGE”
CENTRAL HINGE CHROME FINISH STEEL
CONDENSATION DRAIN PIPE D.14.5X950 MM “IND”
FRIDGE CLEANING BRUSH (D.6X120) “RF-ROUNDED”
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
43
6.3.2 DOORS AND COMPONENTS
E
N
Ref.
001
002
003
004
005
006
007
008
009
011
012
013
013
Description
ALUMINIUM PLUG (H.6.4 D.12/14)
TOP HINGE PIN M8X3 (18+2.5)
DOOR HINGE ARM (M6)
GREY BUSHING 3 MM DOOR-DRAWER DOOR
EGG COMPARTMENT LXH 500X72X103 (ARISTON)
EGG DOOR TRAY LXH 498X82X111(GLASS)
EGG HOLDER X 6 (152X95X20) GREEN GLASS
INTERM. DOOR TRAY 500X44X111(GLASS/PW)
CAN HOLDER PW/LIGHT GREEN (361X83)
BOTTLE RETAINER PROFILE POLARW L=423X39
BOTTLE-HOLDER DOOR TRAY 500X104(GLASS/PW)
DOOR CLOSURE BUSHING RT GREY 40ø 60219...
DOOR CLOSURE BUSHING LT GREY 40ø 60219...
Ref.
Description
013
013
016
015
016
017
018
019
020
021
022
023
DOOR CLOSURE BUSHING LT GREY 49ø 00218...
DOOR CLOSURE BUSHING RT GREY 49ø 60218...
FREEZER DOOR-ARISTON STAINLESS STEEL 592X803X71
DOOR SEAL POLAR WHITE (552X713)
PLUG AL/SILVER X BUSHING H.14 D.13.8/
GREY BUSHING 4 MM “DOOR HINGE”
FRIDGE DOOR ARIS.STAINLESS STEEL 592X1015X71 3-LEDS
DOOR SEAL POLAR WHITE (552X925)
ARISTON LOGO
CONTROL PANEL COVER AL. DOOR 586X47 (3-LEDS
LED INDICATOR LENS (A+ CLASS)
MAGNET.SWITCH 15X10X5 DOOR CLOSED
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
44
6.3.3 FUNCTIONAL COMPONENTS
E
N
Ref.
006
007
008
016
017
018
019
020
021
022
023
009
010
010
011
012
013
014
015
001
002
003
004
005
Description Ref.
LED PCB ARISTON05 BASIC (4 WAY)
SPONGE (350X8X8) “CONTROL PANEL C138-238”
TRIMMER KNOB ALUMINIUM-MET (C238)
LED INDICATOR LENS (CONTROL PANEL) R.EXT 22.7X12.4
ALUMINIUM BUTTON COVER-K22 (H=5.5+7.7 MM)
LED INDICATOR LENS (CONTROL PANEL) R.INT. 8.2X9.3
PROBE FIXTURE “C238”
AL.TAPE H50MMX50MT.X GLASS P.F (1PZ=1M)
LIGHT BOX (DUAL LIGHT)
LAMP HOLDER (VOSSLOH)250V E14 “GIUGIARO”
WIRING-AMP FRIDGE LAMP
LAMP 220-240V/15W (E14)
LAMP COVER (MAX 15W) COLOUR 44
FAN MOTOR SUPPORT-AIR (PW)
RUBBER STOP FAN MOTOR “NO-FROST”
FAN UNIT C09R1907 220V 3.5W (FATON)
FAN MOTOR SUPPORT-AIR (COMPL) PW
COVER MOTOR TURBOCOOLING “ARISTON”
RIGHT FIXTURE EVAPORATOR “C138 IND00”
LEFT FIXTURE EVAPORATOR “C138 IND00”
WHITE PROFILE L=443.5 MM “FIX.EVAP”
FREEZ.EVAP.CONDENSER L407X473(10PIPELINES+ROUND
EEPROM COMBY2005 SW 28347950000 ST-STRIP
FULL POWER BOARD WITHOUT EEPROM
033
034
035
036
037
038
039
040
024
025
026
027
028
029
030
032
041
042
043
044
045
099
099
Description
COMPRESSOR WIRING
SOLEVNOID VALVE WIRING EV1
SOLENOID VALVE WIRING (EV2)
MODULE HOLDER-SMD
MODULE HOLDER COVER-SMD
SERIAL PLUG
RUNNING CONDENSER 4MF (ATT.RAP.8MM)
POWER CORD.3X0.75 EU MM 2500
COMPRESSOR CROSSPIECE 586X110 MM ASSEMBLY
COMPR. HTK95AA 220-240/50 1/5HP-167W R60
RUBBER DAMPER “EMBRACO EM-PW-FF”
COMPRESSOR FIXING PLATE (750908)
LOKRING PIPE WITH VALVE (6 NFMSSV)
CONDENSATION COLLECTION TAB 209X175X58 (POLAND)
3-WAY SOLENOID BITRON 220/50 R134-R600
3-WAY SOLENOID BITRON 220/50 R134-R600
SOLENOID VALVE FIX.BRACKET
FILTER GR.12 (D.4.8/D.3.2 MM) GAS R600A
CONDENSER 576X1000x48 (R600)
WALL MOUNTED SPACER X CONDENSER “IND.00”
POWER CORD HOOK
PROBES 6 WAY CONNECTOR (AMP) KIT
PROBES 4-WAY CONNECTOR (AMP) KIT
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
45
7. APPENDIX:
Probe Temperature Table:
Temperatures
(deg C)
-8
-7
-6
-5
-12
-11
-10
-9
-4
-3
-2
-1
0
-16
-15
-14
-13
-20
-19
-18
-17
Impedance
(Ohms)
96358,15841
90961,0458
85898,49833
81147,91786
76688,3509
72500,36067
68565,90983
64868,25279
61391,83683
58122,21121
55045,94375
52150,54393
49424,39237
46856,67575
44437,32697
42156,97006
40006,86932
37978,88256
36065,41784
34259,39368
32554,20227
Temperatures
(deg C)
13
14
15
16
9
10
11
12
17
18
19
20
7
8
5
6
3
4
1
2
Impedance
(Ohms)
30943,67548
29422,05356
27983,95607
26624,35516
25338,55076
24122,14763
22971,03419
21881,36283
20849,53175
19872,16807
18946,11223
18068,4035
17236,26649
16447,09875
15698,45915
14988,05714
14313,74275
13673,49734
13065,42494
12487,74426
E
N
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
46
Indesit Company
viale Aristide Merloni, 47
60044 Fabriano - Italy tel. +39 0732 66 11 - telex 560196 - fax +39 0732 66 2954 - www.indesitcompany.com
Service Manual
NEW ARISTON 60 cm PLATFORM
Edition
2006.06.15
Language
English
Advertisement
Key features
- Variable temperature compartment
- Super Freeze
- Holiday function
- I CARE
- Ever Fresh
- Touch Interface
- Electronic Thermostat
- Control Knob Interface
- Surround refrigeration system
- Static appliances
