Pentair Fleck 1500 3200, 3210, 3220, 3230, 2300, 2310, 1600, 1650 water softener Service manual

Below you will find brief information for Fleck 1500 3200, Fleck 1500 3210, Fleck 1500 3220, Fleck 1500 3230, Fleck 1500 2300, Fleck 1500 2310, Fleck 1500 1600, Fleck 1500 1650. The Fleck 1500 water softener is designed to remove hard water minerals from your home's water supply. It features a variety of timer settings to adjust regeneration based on usage and a brine system for salt replenishment.

PDF Download
Document
Fleck 1500 3200, 3210, 3220, 3230 Service Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Water Softening
  • Timer Settings
  • Brine System
  • Safety Brine Valve
  • Upflow/Downflow Options
  • Various Meter Sizes
  • Multiple Tank Configurations
  • Electronic Control Options

Frequently asked questions

A minimum of 20 pounds (1.4 bar) of water pressure is required for the regeneration valve to operate effectively.

Use only pellet salt and do not use granulated or rock salt.

Turn the manual regeneration knob clockwise to engage the program wheel and start the regeneration program.

Disconnect the power source, loosen screws near the time plate, turn time plate to desired regeneration time and tighten screws.

The recommended drain line size for residential units is a minimum of 1/2" (13 mm). For backwash flow rates in excess of 7 gpm (26.5 Lpm) or length in excess of 20’ (6 m), use a 3/4" (19 mm) drain line. Commercial drain lines should be the same size as the drain line flow control.
Preparing document for printing…
0%