Truck Tire Data Book

Add to My manuals
94 Pages

advertisement

Truck Tire Data Book | Manualzz
RV Tires
Commercial Light
Truck Tires
Truck Tires
Retreads
8th Edition
If you require information for Michelin products not listed in this data book, please contact your
Michelin representative or your Michelin dealer.
Load and inflation industry standards are in a constant state of change. Michelin continually
updates its product information to reflect these changes. Therefore, printed material may not
reflect the current load and inflation information. Always refer to the tire sidewall markings for
maximum load and pressure information.
Never exceed the rim manufacturer’s maximum air pressure limitation.
TABLE OF CONTENTS
MOUNTING AND SAFETY INFORMATION . . 1 - 6
WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Instructions for Tubeless Tires . . . . . . . . . . . . . . 3 - 4
General Instructions for Tube-Type Tires . . . . . . . . . . . . . 5 - 6
XZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
XZY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
XZY 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
XZY-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
X One XZU S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
XZU S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
XZU / XZU 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
XZU 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
®
®
®
™
®
RV TIRES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 14
Michelin RV Tire Reference Chart . . . . . . . . . . . . . . . . . . . . . . 8
XRV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Michelin Inflation Charts for RV Usage Only . . . 10 - 14
Wheel Diameter - 16" . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Wheel Diameter - 17" . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Wheel Diameter - 19.5" . . . . . . . . . . . . . . . . . . . . . . . . . 11
Wheel Diameter - 22.5" . . . . . . . . . . . . . . . . . . . . . 12 - 13
Wheel Diameter - 24.5" . . . . . . . . . . . . . . . . . . . . . . . . . 14
®
®
®
®
®
®
DRIVE TIRES
X One XDA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
X One XDA-HT PLUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
XDA ENERGY / XDA2 + ENERGY . . . . . . . . . . . . . . . . . . . . . 40
XDA3 / XD2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
XD4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
XDA-HT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
XDHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
XDE 2 / XDE 2+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
XDE M/S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
XDE A/T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
XDY-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
XDY 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
XDY-EX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
XDN 2 / XDN 2 GRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
XDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
®
®
®
™
®
®
™
®
®
™
COMMERCIAL LIGHT TRUCK TIRES . . . . . 15 - 22
Michelin Light Truck Tire Reference Chart . . . . . . . . . . . . . 16
LTX A/S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
LTX M/S Commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
LTX A/T Commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
XPS RIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
XPS TRACTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
XCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Michelin Inflation Charts for Light Truck Tires . . 20 - 22
Wheel Diameter - 15" . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Wheel Diameter - 16" . . . . . . . . . . . . . . . . . . . . . . 20 - 22
Wheel Diameter - 16.5" . . . . . . . . . . . . . . . . . . . . . . . . . 22
Wheel Diameter - 17" . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
®
®
®
®
®
®
®
®
®
®
®
™
®
™
®
®
®
Tread Pattern Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Tire Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Product Segmentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Michelin Truck Tire Reference Chart . . . . . . . . . . . . . . 26 - 28
Michelin Product Availability . . . . . . . . . . . . . . . . . . . . . 29 - 30
TRAILER TIRES
X One XTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
X One XTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
XTA ENERGY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
XTA 2 ENERGY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
XT-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
XTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
XTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
XTE2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
XTY 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
STEER/ALL-POSITION TIRES
XZA3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
XZA2 / XZ2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
XZA2 Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
XZA -1+ / XZA -1B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
XZA 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
XZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
XZE 2 / XZE 2+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
SPECIAL APPLICATION TIRES
XTE2 (Wide Base) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
XZA 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
XZL (Wide Base) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
XZY 3 (Wide Base) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
XDL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
XS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
XZL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
®
®
®
™
®
TRUCK TIRES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 - 66
®
®
®
®
®
®
®
®
®
®
®
®
®
™
®
®
®
®
™
®
®
™
™
Michelin Inflation Charts for Truck Tires . . . . . . . 56 - 66
Wheel Diameter - 15" . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Wheel Diameter - 17.5" . . . . . . . . . . . . . . . . . . . . . 56 - 57
Wheel Diameter - 19.5" . . . . . . . . . . . . . . . . . . . . . 57 - 58
Wheel Diameter - 20" . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Wheel Diameter - 20.5" . . . . . . . . . . . . . . . . . . . . . . . . . 60
Wheel Diameter - 21" . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Wheel Diameter - 22.5" . . . . . . . . . . . . . . . . . . . . . 60 - 64
Wheel Diameter - 24" . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Wheel Diameter - 24.5" . . . . . . . . . . . . . . . . . . . . . 65 - 66
RETREAD PRODUCTS . . . . . . . . . . . . . . . . . . . 67 - 78
Michelin Retreads Quick Reference Tread Guide . . . . . 68
Custom Mold Tread Guide . . . . . . . . . . . . . . . . . . . . . . . . . 69
Casing Fitment Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Buffing Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Retread Tread Design . . . . . . . . . . . . . . . . . . . . . . . . . . 71-78
DRIVE POSITION
XDA2 19/23 Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . 71
XDA + AT Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . 71
XDA-HT Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . 71
XD4 Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
XDN Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 71
XDHT Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . 71
Recamic XDA Pre-Mold Retread . . . . . . . . . . . . . . . . . . 72
XDC LL 18/22 Pre-Mold Retread . . . . . . . . . . . . . . . . . . 72
XM+S4 Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . 72
XDE M/S Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . 72
XDS Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
XDU S Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . 73
XDY Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
XDY-1 Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . 73
®
™
®
TRAILER
XT-1 Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
XTA -1 Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . 75
Recamic XTA Pre-Mold Retread . . . . . . . . . . . . . . . . . . 75
XTY SA Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . 75
®
™
®
™
®
®
®
™
™
WIDE BASE RETREADS
XTE2 (Wide Base) Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . 76
XZH (Wide Base) Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . 76
XZY (Wide Base) Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . .76
XZA (Wide Base) Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . .76
®
™
™
™
®
™
®
™
X ONE RETREADS
X One XDA Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . 77
X One XTA Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . 77
X One XTE Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . 77
®
®
®
®
®
®
™
™
™
™
X ONE RETREADS - CAP AND CASING
X One XTA Custom Mold Retread . . . . . . . . . . . . . . . . 78
X One XTE Custom Mold Retread . . . . . . . . . . . . . . . . 78
X One XDA Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . 78
®
®
®
®
™
®
®
™
™
™
™
™
™
®
™
®
™
®
™
®
®
™
®
™
®
™
®
™
®
™
®
™
®
™
™
™
ALL-WHEEL POSITION
XZA Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Recamic XZA Pre-Mold Retread . . . . . . . . . . . . . . . . . . 74
XZE SA Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . 74
XZE Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
XZU S Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 74
XZY Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
XZY-1 Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . 75
XZY-2 Pre-Mold Retread . . . . . . . . . . . . . . . . . . . . . . . . . 75
®
™
®
®
™
®
™
®
™
®
™
®
™
™
™
™
™
APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 - 86
Tubes, Flaps and Valves . . . . . . . . . . . . . . . . . . . . . . . 80 - 81
Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Load Range / Ply Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Speed Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Load Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Static and Low Speed Load and
Pressure Coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Proper application of On/Off Road (Y and L) Tires . . . .85
Cold Climate Pressure Correction . . . . . . . . . . . . . . . . . . .85
Changes in Top Speed When
Tire’s Rev./Mile Changes . . . . . . . . . . . . . . . . . . . . . . . . .86
Load / Inflation Table
for 315/80R22.5 LRL on 8.25" Rim . . . . . . . . . . . . . . . . .87
Load / Inflation Table
for 455/55R22.5 LRM on 13.00" Rim . . . . . . . . . . . . . . . 87
Tire / Wheel Assembly Balance and Runout Limits . . . 88
Recommended Balance and Runout Values
For Disc Wheels and Demountable Rims . . . . . . . . . . 88
Mounting and
Safety Instructions
Mounting
and Safety
Instructions
1
Mounting and
Safety Instructions
WARNINGS!
IMPORTANT: BE SURE TO READ THIS SAFETY
INFORMATION. Make sure that everyone who services
tires or vehicles in your operation has read and understands these warnings. SERIOUS INJURY OR DEATH
CAN RESULT FROM FAILURE TO FOLLOW SAFETY
WARNINGS. For additional warnings and instructions
consult Michelin Truck Tire Service Manual - MWL40732.
No matter how well any tire is constructed, punctures, impact damage, improper inflation, improper
maintenance or service factors may cause tire failure creating a risk of property damage and serious or fatal injury
to you and/or your customer.
Encourage your customers to examine their tires frequently for snags, bulges, excessive treadwear, separations or cuts. If such conditions appear, advise them to
demount the tire, use their spare, and see you immediately. If you spot any of the above conditions, bring them to
the customer’s attention immediately. For safety, comply
with the following warnings.
AIR PRESSURE
Customers should be advised that the air pressure in
tires, including the spare, should be checked at least
Tire and rim servicing can be dangerous and must be done only by trained
personnel using proper tools and procedures. Failure to read and comply
with all procedures may result in serious injury or
death to you or others.
Re-inflation of any type of tire and rim
assembly that has been operated in a
run-flat or underinflated condition
(80% or less of recommended operating pressure) can result in serious injury or death.
The tire may be damaged on the inside and can
explode while you are adding air. The rim parts
may be worn, damaged or dislodged and can
explosively separate.
Refer to RMA Tire
Information Service Bulletin on potential “zipper
ruptures” (TISB 33 Number 2).
Use of starting fluid, ether, gasoline or
any other flammable material to lubricate, seal or seat the beads of a tubeless tire can cause the tire to explode
or can cause the explosive separation
of the tire/rim assembly resulting in serious injury
or death. The use of any flammable material during tire servicing is absolutely prohibited.
2
monthly and always before extended driving, when tires
are cold (at least three hours after the vehicle has been
stopped and before it is driven more than one mile or two
kilometers). Do not reduce pressure when tires are hot;
use an accurate air pressure gauge to check pressure and
maintain it at the level recommended on the vehicle tire
placard or in the vehicle Owner’s Manual. Underinflation
produces extreme flexing of sidewalls and builds up heat
to the point that tire failure may occur. Overinflation can
cause the tire to be more susceptible to impact damage.
Over/under inflation may also adversely affect vehicle
handling. Cold tire pressures should never be higher than
the limit molded on the sidewall.
LOAD LIMITS
Exceeding the load-carrying capacity of a tire can be
dangerous. Overloading builds up excessive heat in the
tire and could lead to failure. However, upon occasion,
loads can be increased if speeds are reduced. Please refer
to the chart on Page 84 for additional information.
Never exceed loads or air pressure limits of the wheel or
rim without the permission of the component manufacturer.
Any inflated tire mounted on a rim
contains explosive energy. The use of
damaged, mismatched or improperly
assembled tire/rim parts can cause the
assembly to burst apart with explosive force. If
you are struck by an exploding tire, rim part or
the air blast, you can be seriously injured or
killed.
Re-assembly and inflation of mismatched parts can result in serious
injury or death. Just because parts
come in together does not mean that
they belong together. Check for proper matching of all rim parts before putting any
parts together.
Mismatching tire and rim diameters is
dangerous. A mismatched tire and rim
assembly may explode and can result
in serious injury or death. This warning applies to any combination of mismatched
components, such as 14" and 14.5", 15" and 15.5",
16" and 16.5" 17" and 17.5", 18" and 18.5" or 19"
and 19.5" tires, and rim combinations. Never
assemble a tire and rim unless you have positively identified and correctly matched the parts.
A tire cannot perform properly unless it is mounted
properly on the correct size rim or wheel. The following
are general instructions for demounting and mounting
Michelin tubeless tires, including the X One tire. For
detailed instructions on mounting and demounting truck
tires on particular types of rims and wheels, refer to the
instructions of the rim and wheel manufacturer or the
RMA wall charts.
®
®
2. TIRE AND RIM LUBRICATION:
It is essential that an approved tire mounting lubricant be used. Preferred materials for use as bead lubricants are vegetable oil soaps or animal soaps, in solution.
Never use antifreeze, silicones, or petroleum-base lubricants. Lubricants not mixed to the manufacturer’s specifications may have a harmful effect on the tire and wheel.
Mounting and
Safety Instructions
GENERAL INSTRUCTIONS
FOR TUBELESS TIRE MOUNTING/DEMOUNTING
The lubricant serves the following three purposes:
PROPER USE OF DIRECTIONAL TIRES
Truck tires featuring directional tread designs have
arrows molded into the shoulder / edge of the outer ribs
to indicate the intended direction of tire rotation. It is
important, to maximize tire performance, that directional
tires be mounted correctly on wheels to ensure that the
directionality is respected when mounted on the vehicle.
For example, when mounting directional drive tires
on a set of 8 wheels use the drop centers as a reference.
Four tires should be mounted with the arrows pointing to
the left of the technician and four tires with the arrows
pointing to the right. This ensures that when the assemblies are fitted onto the vehicle that all tires can be pointed in the desired direction of rotation.
Pairs of steer tires should be mounted in a similar
fashion, one each direction.
Once directional tires are worn greater than 50%,
there is generally no negative effect of running them in a
direction opposite to the indicated direction of rotation.
Operating directional tires from new to 50% worn in
the opposite direction of that indicated on the tire will
result in the premature onset of irregular wear, excessive
noise levels and significantly reduced tread life.
1. SELECTION OF PROPER COMPONENTS
AND MATERIALS:
a. All tires must be mounted with the proper rim/wheel
as indicated in the specification tables. For complete
tire specifications, refer to application specific data
books.
• Minimizes the possibility of damage to the tire beads
from the mounting tools.
• Eases the insertion of the tire onto the rim by lubricating all contacting surfaces.
• Assists proper bead seating (tire/rim centering) and
helps to prevent eccentric mountings.
Avoid using excessive amounts of lubricant, which can
become trapped between the tire and tube and can
result in tube damage and rapid air loss.
CAUTION: It is important that tire lubricant be
clean and free of dirt, sand, metal shavings or other hard
particles. The following practice is recommended:
a. Use a fresh supply of tire lubricant each day drawing
from a clean supply and placing the lubricant in a
clean portable container.
b. Provide a cover for the portable container and/or
other means to prevent contamination of the lubricant when not in use. For lubricants in solution, we
suggest the following method, which has proven to be
successful in minimizing contamination and preventing excess lubricant from entering the tire casing: provide a special cover for the portable container that has
a funnel-like device attached. The small opening of
the funnel should be sized so that when a swab is
inserted through the opening into the reserve of lubricant and then withdrawn, the swab is compressed,
removing excess lubricant. This allows the cover to be
left in place providing added protection. A mesh false
bottom in the container is a further safeguard against
contaminants. The tire should be mounted and
inflated promptly before lubricant dries.
b. Make certain that rim/wheel components are properly matched and of the correct dimensions for the tire.
3. PREPARATION OF WHEELS, RIMS
AND TIRES:
c.
Always install new valve cores, and metal valve caps
containing plastic or rubber seals.
Never weld or apply heat to a rim or wheel on which a
tire is mounted.
d. Always replace any rubber valve stem on a 16"
through 19.5" wheel.
a. Always wear safety goggles or face shields when buffing or grinding rims or wheels.
e.
b. Inspect wheel/rim assemblies for cracks, distortion,
and deformation of flanges. Using a file and/or emery
cloth, smooth all burrs, welds, dents, etc. that are
present on the tire side of the rim. Inspect the condition of bolt holes on the wheels.
Always use a safety device such as an inflation cage
or other restraining device that will constrain all
rim/wheel components during an explosive separation of a multi-piece rim/wheel, or during the sudden
release of the contained air of a single piece wheel that
is in compliance with OSHA standards. Never stand
over a tire or in front of a tire when inflating. Always
use a clip on valve chuck and stand to the side when
inflating.
Note: Safety cages, portable and/or permanent are
also available for inflation of the X One tire assemblies.
®
c.
Remove rust with a wire brush and apply a rust
inhibiting paint on steel wheels.
d. Remove any accumulation of rubber or grease, which
might be stuck to the tire, being careful not to damage
it. Wipe the beads down with a dry rag.
3
Mounting and
Safety Instructions
TUBELESS TIRE MOUNTING/DEMOUNTING
Re-inflation of any type of tire/rim
assembly that has been operated in a
run-flat or underinflated condition
(80% or less of recommended pressure) can result in serious injury or death. The tire
may be damaged on the inside and can explode
while you are adding air. The rim parts may be
worn, damaged or dislodged and can explosively
separate.
DEMOUNTING OF TUBELESS TIRES
1. Before loosening any nuts, deflate the tire by removing the valve core.
2. With the tire assembly lying flat, break the bead seat
of both beads with a bead breaking tool. Do not use
hammers of any type. Striking a wheel/rim assembly
with a hammer of any type can damage the tire or
wheel and endanger the installer. Use a steel duck
billed hammer only as a wedge. Do not strike the
head of a hammer with another hard faced hammer –
use a rim mallet.
3. Apply the lubricant to all surfaces of the bead area of
the tire. When applying lubricant to the rim, lubricate
the entire rim surface from flange to flange. The tire
should be mounted and inflated promptly before the
lubricant dries.
4. Beginning at the valve, remove the tire using tire irons
designed for this purpose. Starting at the valve will
minimize chances of damaging the bead. Make certain that the flange with the tapered ledge that has the
shortest span to the drop center is facing up. Always
attempt to keep the bead not being worked by the
irons, in the full depth of the drop center cavity.
MOUNTING TUBELESS TIRES
1. Inspect the condition of the bolt holes on the wheels,
look for signs of fatigue. Check flanges for excessive
wear by using the wheel manufacturer’s flange wear
indicator.
2. Replace valve seals and inspect valve stem for damage
and wear. Replace valve stem if necessary.
3. Apply lubricant according to previous instructions.
The tire should be mounted and inflated promptly
before the lubricant dries.
4. With the short ledge up, lay the tire over the rim at the
valve side and work it on with proper tubeless tire tools,
making full use of the drop center well. The 19.5-inch
tire should be mounted from the short side. Care
should be taken to insure any internal monitoring system is not damaged or dislodged during this service.
4
5. Do not use any kind of hammer. Bead damage may
occur leading to tire destruction.
6. The X One tire is designed to
replace dual tires on the drive
and trailer positions of tandem over the road vehicles
and the tires must be mounted
on 22.5 x 14.00" size wheels.
Position the tire and wheel
assembly so the valve stem is
facing outward, away from the
vehicle.
®
GG-Ring
Wheel
INFLATION OF TUBELESS TIRES
Re-inflation of any type of tire/rim
assembly that has been operated in a
run-flat or underinflated condition
(80% or less of recommended pressure) can result in serious injury or death. The tire
may be damaged on the inside and can explode
while you are adding air. The rim parts may be
worn, damaged or dislodged and can explosively
separate.
1. Lay tire/wheel assembly horizontally and inflate to no
more than 5 psi to position the beads on the flanges.
2. To complete the seating of the beads, place the
assembly in an approved safety cage and inflate to 20
psi. Check the assembly carefully for any signs of distortion or irregularities from run flat. If runflat is
detected, scrap the tire.
3. If no damage is detected, continue to inflate to the
maximum air pressure marked on the sidewall.
RMA recommends that a tire suspected of being
underinflated be overinflated by 20 psi and remain in
the cage for 20 minutes prior to handling.
4. Insure that the guide rib is positioned concentric in
relation to the rim flange with no greater than 2/32" of
difference found circumferentially. If bead(s) did not
seat, deflate tire, relubricate the bead seats and reinflate.
5. After beads are properly seated, adjust tire pressure to
recommended operating pressure. Check valve core
for leakage, then install suitable valve cap.
Never inflate or re-inflate any tires that have
been run underinflated or flat without careful
inspection for damage, inside and out.
A tire cannot perform properly unless it is mounted
properly on the correct size rim or wheel. The following
are general instructions for demounting and mounting
Michelin tube-type tires. For detailed instructions on
mounting and demounting truck tires on particular types
of rims and wheels, refer to the instructions of the rim and
wheel manufacturer or the RMA wall charts.
®
Do not re-inflate any tires that have
been run underinflated or flat without
careful inspection for damage. If runflat damage is detected, scrap the tire.
A tire is considered runflat if it is found to be 80%
below recommended operating pressure. This can
result in serious injury or death. The tire may be
damaged on the inside and can explode while you
are adding air. The rim parts may be worn, damaged or dislodged and can explosively separate.
1. SELECTION OF PROPER COMPONENTS AND
MATERIALS:
a. All tires must be mounted with the proper Michelin
tube and flap (if required) and rim or wheel as indicated in the specification tables. For complete tire specifications, refer to application specific data books.
(See Introduction for listing.)
b. Make certain that rim/wheel components are properly matched and of the correct dimensions for the tire.
c.
Always fit a new Michelin tube in a new mounting.
Since a tube will exhibit growth in size through normal use, an old tube used in a new mounting increases the possibility of tube creasing and chafing, possibly resulting in failure.
d. Always install a new flap in a new mounting.
A flap, through extended use, becomes hard and brittle. After a limited time, it will develop a set to match
the tire and rim in which it is fitted. Therefore, it will
not exactly match a new tire/rim combination.
e.
Always install new valve cores, and metal valve caps
containing plastic or rubber seals. For tires requiring
‘O’ Rings, be sure to properly install a new silicone ‘O’
Ring at every tire change.
f.
Always use a safety device such as an inflation cage or
other restraining device that will constrain all
rim/wheel components during an explosive separation of a multi-piece rim/wheel, or during the sudden
release of the contained air of a single piece wheel that
is in compliance with OSHA standards. Never stand
over a tire or in front of a tire when inflating. Always
use a clip on valve chuck and stand to the side when
inflating.
2. TIRE AND RIM LUBRICATION:
It is essential that an approved tire mounting lubricant be used. Preferred materials for use as bead lubricants are vegetable oil soaps or animal soaps, in solution.
Never use antifreeze, silicones, or petroleum-base lubricants. Lubricants not mixed to the manufacturer’s specifications may have a harmful effect on the tire and wheel.
The lubricant serves the following three purposes:
• Minimizes the possibility of damage to the tire beads
from the mounting tools.
Mounting and
Safety Instructions
GENERAL INSTRUCTIONS FOR MOUNTING
AND DEMOUNTING TUBE-TYPE TIRES
• Eases the insertion of the tire onto the rim by lubricating all contacting surfaces.
• Assists proper bead seating (tire/rim centering) and
helps to prevent eccentric mountings.
Apply a clean lubricant to all portions of the tire bead
area and the exposed portion of the flap using sufficient
but sparing quantities of lubricant. Also lubricate the
entire rim surface. Avoid using excessive amounts of
lubricant, which can become trapped between the tire,
and tube and can result in tube damage and rapid air loss.
CAUTION: It is important that tire lubricant be
clean and free of dirt, sand, metal shavings or other hard
particles. These particles may lodge between the tube
and the flap edges resulting in splits in the tube. The following practice is recommended:
a. Use a fresh supply of tire lubricant each day drawing
from a clean supply and placing the lubricant in a
clean portable container.
b. Provide a cover for the portable container and/or
other means to prevent contamination of the lubricant when not in use. For lubricants in solution, we
suggest the following method, which has proven to be
successful in minimizing contamination and preventing excess lubricant from entering the tire casing: provide a special cover for the portable container that has
a funnel-like device attached. The small opening of
the funnel should be sized so that when a swab is
inserted through the opening into the reserve of lubricant and then withdrawn, the swab is compressed,
removing excess lubricant. This allows the cover to be
left in place providing added protection. A mesh false
bottom in the container is a further safeguard against
contaminants. The tire should be mounted and
inflated promptly before lubricant dries.
3. PREPARATION OF WHEELS, RIMS AND
TIRES:
Never weld or apply heat to a rim or wheel on which a
tire is mounted.
a. Always wear safety goggles or face shields when buffing or grinding rims or wheels.
b. Inspect wheel/rim assemblies for cracks, distortion,
deformation of flanges, side rings, lock rings, etc.
Using a file and/or emery cloth, smooth all burrs,
welds, dents, etc. that are present on the tire side of
the rim. Inspect the condition of bolt holes on the
wheels.
c.
Remove rust with a wire brush and apply a rust
inhibiting paint.
d. Remove any accumulation of rubber or grease that
might be stuck to the tire, being careful not to damage
it. Wipe the beads down with a dry rag.
5
Mounting and
Safety Instructions
TUBE-TYPE TIRE MOUNTING/DEMOUNTING
Any inflated tire mounted on a rim contains explosive energy. The use of damaged, mismatched or improperly
assembled tire/rim parts can cause the
assembly to burst apart with explosive force. If
you are struck by an exploding tire, rim part or the
air blast, you can be seriously injured or killed. Do
not attempt to dismount the tire while the assembly is still installed on the vehicle. Use proper tools
to demount or mount rim parts. Never use a steel
hammer to seat rim parts — use only rubber, plastic, or brass tipped mallets. Striking a wheel/rim
assembly with a hammer of any type can damage
the tire or wheel and endanger the installer. Use a
steel duck billed hammer only as a wedge. Do not
strike the head of a hammer with another hard
faced hammer — use a rim mallet.
DEMOUNTING TUBE-TYPE TIRES
1. If a tire has been running underinflated or if any damage to the tire or wheel is suspected, the valve core
should be removed prior to removing the tire/wheel
assembly from the vehicle axle. This is to prevent a
possible accident.
2. Before unlocking any side ring or lock ring, remove
the valve core and allow the tire to deflate completely.
3. Remove all rim or wheel parts.
MOUNTING OF TUBE-TYPE TIRES
1. Insert the proper size Michelin tube into the tire and
partially inflate (3 psi) to round out the tube (with
larger sizes it may be necessary to use bead spreaders
– see below for mounting instructions).
®
2. Insert the valve through the flap valve hole. (Make
sure the reinforced patch that is directly over the flap
valve hole is facing outwards.) Then insert the
remainder of the flap into the tire.
3. Check the flap wings to insure against folding. This is
easily accomplished by placing your hand into one
tire side, then the other, and then running your hand
along the entire flap wing.
4. Inflate the tube until the flap is secured against the
tire wall and the beads start to spread apart, making
sure not to exceed 3 psi.
a. Place the first at a 90° angle to the valve. (Flap is
positioned between the spreader and the tube.)
b. Place the second directly opposite the first.
c. Spread the beads and insert the flap.
d. Close the beads, remove spreaders.
2. Follow Steps 4 through 7 of the “Mounting of TubeType Tires”.
MOUNTING OF TUBE-TYPE TIRES
USING AUTOMATIC SPREADERS:
1. Spread the tire beads.
2. Inflate the tube to approximately 3 psi.
3. Insert the tube into the tire. Apply a proper tire lubricant to the inside and outside surfaces of both beads
and to that portion of the tube that appears between
the beads. Make sure that excess lubricant does not
run down into the tire.
4. Insert the valve through the flap valve hole. (As mentioned, the flap reinforced valve area must face outwards.) Insert the remainder of the flap into the tire.
5. Close the beads.
6. Follow Steps 4 through 7 of the “Mounting of TubeType Tires”.
INFLATION OF TUBE-TYPE TIRES
1. An air line with an extension (30" minimum), in-line
gauge, and a clip-on valve chuck should be used for
inflation. Remove valve core and lay the assembly flat
on the ground. Using an approved restraining device,
inflate partially to seat beads. While the tire is still in
the restraining device, make sure all rim components
are centered and locked properly. If not, the tire must
be deflated, broken down, re-lubricated and reinflated. Do not attempt to seat the lock ring by
means of a hammer.
2. Deflate the tire by removing the air line. This is to
allow the tube to relax, thus, eliminating any wrinkles
or uneven stretching that may have occurred during
primary inflation.
6. Place tire, tube and flap on the wheel or rim, taking
care to center the valve in the slot.
3. Install the valve core and, using a safety cage or other
approved restraining device meeting OSHA standards, re-inflate the tire to the pressure shown on the
sidewall in order to insure proper bead seating. Then
adjust the tire to the proper operating pressure. Never
stand over a tire or in front of a tire when inflating.
Always use a clip on valve chuck and stand to the side
when inflating.
7. Fit side ring and lock ring, insuring that they are properly positioned, locked, and are correct for the ‘fitment’.
4. Re-inspect the assembly for proper positioning of all
components.
5. Apply a proper tire lubricant to both beads and the
exposed flap. Make sure that excess lubricant does
not run down into the tire.
5. Check for leaks and install a suitable valve cap.
MOUNTING OF TUBE-TYPE TIRES
USING MANUAL SPREADERS:
6
1. Follow Steps 1 through 3 of the “Mounting of TubeType Tires”. However, before inserting the flap into
the tire, position two bead spreaders in the following
manner:
6. Do not re-inflate any tires that have been run underinflated or flat without careful inspection for damage. If runflat damage is detected, scrap the tire.
A tire is considered runflat when it is found to be
80% below recommended operating pressure.
RV Tires
RV Tires
7
MICHELIN RV TIRES REFERENCE CHART
®
RV TIRES AND SPECIFICATIONS
SPECIFICATIONS PAGE NUMBER
XRV
®
9
®
19
XCA
®
XPS RIB
XZA
18
®
34
®
32
®
31
XZA2 ENERGY
XZA3
RV Tires
XZE
®
33
PRIMARY RECOMMENDATION IS LISTED FIRST
SINGLE
SIZE
LR
TREAD
7.50R16
D
XPS RIB
LT225/75R16
E
XPS RIB
LT245/75R16
E
XPS RIB
MAX LOAD
MAX PSI
MAX LOAD
MAX PSI
®
2470
65
2150
65
®
2680
80
2470
80
®
3042
80
2778
80
®
2680
80
2470
80
®
3042
80
2778
80
®
2800
75
2600
75
®
3525
110
3305
110
3640
95
3415
95
3970
110
3750
110
LT215/85R16
E
XPS RIB
LT235/85R16
E
XPS RIB
7.50R17
D
XCA
8R19.5
F
XZA
225/70R19.5
F
XRV , XZE
®
®
®
225/70R19.5
G
XZE
245/70R19.5
F
XRV , XZE
4080
95
3860
95
245/70R19.5
H
XZE
4940
120
4675
120
11R22.5
G
XZA3
®
6175
105
5840
105
11R22.5
H
XZA3
®
6610
120
6005
120
12R22.5
H
XZ2 , XZE
7390
120
6780
120
255/70R22.5
H
5510
120
5070
120
®
®®
®
®
®
XZE ®
275/70R22.5
J
XZA2 ENERGY
305/70R22.5
L
XRV
365/70R22.5
L
XZA
235/80R22.5
G
®
®
6940
130
6395
120
7830
120
6940
120
10500
125
N/A
N/A
®
®
4675
110
4410
110
®
®
XRV , XZE
255/80R22.5
G
XRV , XZE
275/80R22.5
G
XZA3
275/80R22.5
H
XZA3
295/80R22.5
H
XZA2 ENERGY
5205
110
4805
110
®
6175
110
5675
110
®
7160
120
6610
120
7830
120
6940
120
®
®
315/80R22.5
L
XZA2 ENERGY
9090
130
8270
130
11R24.5
G
XZA3 , XZE
®
6610
105
6005
105
305/75R24.5
J
XZE 2
8270
120
7160
120
275/80R24.5
G
XZA3
®
6175
110
5675
110
®
®
With chip and cut resistant tread compound.
8
DUAL
(1)
(2)
XRV
®
The all-position radial designed specifically for
exceptional performance on recreational vehicles
and motorhomes
• Wide, "see-through" grooves promote drainage efficiency to help
improve traction on wet surfaces
• Multi-siping helps deliver dependable grip and long, even wear
• Enlarged sidewall characters makes load / pressure information
easier to read, facilitating proper use and maintenance
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
225/70R19.5 (1)
F
58916
13
75
Loaded
Radius
in.
mm.
14.9
379
RV Tires
• Stable tread with cool running compound engineered to reduce
squirm and lower heat for improved handling and durability
XRV
®
Overall
Diameter
in.
mm.
32.0
813
Overall
Width
(‡)
in.
mm.
8.7
222
Approved
Rims
6.00, 6.75
Min. Dual
Spacing
(‡)
in.
mm.
9.7
246
Revs
per
Mile
lbs.
648
3640
Max. Tire Load
Single
psi
kg.
95
1650
kPa
lbs.
660
3415
Max. Tire Load
Dual
psi
kg.
95
1550
kPa
660
245/70R19.5 (1)
F
67140
14
75
15.5
393
33.3
846
9.6
245
6.75, 7.50
10.7
272
625
4080
95
1850
660
3860
95
1750
660
235/80R22.5 (1)
G
87511
16
75
17.4
443
37.1
943
9.2
233
6.75, 7.50
10.3
262
556
4675
110
2120
760
4410
110
2000
760
255/80R22.5 (1)
G
59634
17
75
17.8
452
38.2
972
9.9
251
7.50, 8.25
11.2
284
541
5205
110
2360
760
4805
110
2180
760
(2)
L
93499
16
75
18.1
460
39.1
994
12.3
312
9.00, 8.25
13.5
343
531
7830
120
3550
830
6940
120
3150
830
305/70R22.5
(1, 2) Tread design as indicated above the tire pictures.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time
without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
9
MICHELIN INFLATION CHARTS FOR RV USAGE ONLY
For RV use only, Michelin displays tire loads per axle
end in the load and inflation tables, as we recommend
weighing each axle end separately and using the heaviest
end weight to determine the axle's cold inflation tire pressure. For control of your RV, it is critical the tire pressures
be the same across an axle, while NEVER exceeding the
maximum air pressure limit stamped on the wheels.
tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not
match any table listed, please contact your Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates
its product information to reflect these changes. Printed
material may not reflect the latest load and inflation
standards.
To select the proper load and inflation table, locate
your tire size in the following pages, then match your
RV Tires
In the load and inflation tables, SINGLE means an axle with one tire mounted on each end, while DUAL means an axle
with two tires mounted on each end. The loads indicated represent the total weight of an axle end, in an RV application.
When one axle end weighs more than the other, use the heaviest of the two end weights to determine the unique tire
pressure for all tires on the axle. The maximum cold air pressure for each axle may vary, depending on their weights.
These tables are applicable for all RV axles, whether or not they are power-driven.
WHEEL DIAMETER - 16”
7.50R16 LRD
PSI
35
40
45
50
55
60
65
kPa
250
280
310
350
380
410
450
SINGLE
1620
1770
1930
2040
2190
2310
2470
S
2470 LBS AT
65 PSI
DUAL
2860
3130
3380
3640
3860
4080
4300
D
2150 LBS AT
65 PSI
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
735
805
875
925
995
1050
1120
S
1120 KG
AT 450 kPa
DUAL
1300
1420
1530
1650
1750
1850
1950
D
975 KG
AT 450 kPa
LT225/75R16 LRE
PSI
35
40
45
50
55
60
65
70
75
80
kPa
250
280
310
350
380
410
450
480
520
550
SINGLE
1500
1650
1790
1940
2060
2190
2335
2440
2560
2680
S
2680 LBS AT
80 PSI
DUAL
2730
3000
3260
3530
3750
3990
4300
4440
4660
4940
D
2470 LBS AT
80 PSI
SINGLE
700
750
813
880
935
995
1060
1108
1160
1215
S
1215 KG
AT 550 kPa
DUAL
1270
1360
1480
1600
1700
1810
1950
2015
2115
2240
D
1120 KG
AT 550 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT245/75R16 LRE
PSI
35
40
45
50
55
60
65
70
75
80
kPa
250
280
310
350
380
410
450
480
520
550
SINGLE
1700
1865
2030
2205
2335
2480
2625
2765
2900
3042
S
3042 LBS AT
80 PSI
DUAL
3090
3390
3690
4010
4250
4510
4763
5030
5280
5556
D
2778 LBS AT
80 PSI
SINGLE
790
845
920
1000
1060
1125
1190
1255
1315
1380
S
1380 KG
AT 550 kPa
DUAL
1440
1540
1675
1820
1930
2045
2160
2280
2395
2520
D
1260 KG
AT 550 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT215/85R16 LRE
PSI
35
40
45
50
55
60
65
70
75
80
kPa
250
280
310
350
380
410
450
480
520
550
SINGLE
1495
1640
1785
1940
2050
2180
2335
2430
2550
2680
S
2680 LBS AT
80 PSI
DUAL
2720
2980
3250
3530
3730
3970
4300
4420
4640
4940
D
2470 LBS AT
80 PSI
SINGLE
695
745
810
880
930
990
1060
1100
1155
1215
S
1215 KG
AT 550 kPa
DUAL
1260
1350
1475
1600
1690
1800
1950
2005
2105
2240
D
1120 KG
AT 550 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT235/85R16 LRE
PSI
35
40
45
50
55
60
65
70
75
80
kPa
250
280
310
350
380
410
450
480
520
550
SINGLE
1700
1870
2030
2205
2335
2485
2625
2765
2905
3042
S
3042 LBS AT
80 PSI
DUAL
3090
3400
3690
4010
4250
4520
4760
5030
5290
5556
D
2778 LBS AT
80 PSI
SINGLE
790
850
920
1000
1060
1130
1190
1255
1320
1380
S
1380 KG
AT 550 kPa
DUAL
1440
1545
1675
1820
1930
2050
2160
2280
2400
2520
D
1260 KG
AT 550 kPa
LBS
KG
10
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
MICHELIN INFLATION CHARTS FOR RV USAGE ONLY
In the load and inflation tables, SINGLE means an axle with one tire mounted on each end, while DUAL means an axle
with two tires mounted on each end. The loads indicated represent the total weight of an axle end, in an RV application.
When one axle end weighs more than the other, use the heaviest of the two end weights to determine the unique tire
pressure for all tires on the axle. The maximum cold air pressure for each axle may vary, depending on their weights.
These tables are applicable for all RV axles, whether or not they are power-driven.
WHEEL DIAMETER - 17”
7.50R17 LRD
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
1345
1520
1695
1860
2025
2185
2340
2495
2650
2800
S
2800 LBS at
75 PSI
DUAL
2500
2830
3140
3460
3760
4060
4350
4640
4920
5200
D
2600 LBS at
75 PSI
SINGLE
610
680
770
840
900
990
1050
1130
1190
1270
S
1270 KG
at 520 kPa
DUAL
1140
1280
1440
1560
1680
1840
1960
2100
2220
2360
D
1180 KG
at 520 kPa
RV Tires
PSI
WHEEL DIAMETER - 19.5”
8R19.5 LRF
PSI
70
75
80
85
90
95
100
105
110
kPa
480
520
550
590
620
660
690
720
760
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
2540
2680
2835
2955
3075
3195
3305
3415
3525
S
3525 LBS at 110 PSI
DUAL
4920
5140
5360
5570
5780
6000
6200
6400
6610
D
3305 LBS at 110 PSI
SINGLE
1150
1220
1285
1340
1400
1450
1500
1550
1600
S
1600 KG
at 760 kPa
DUAL
2240
2340
2430
2520
2620
2720
2820
2920
3000
D
1500 KG
at 760 kPa
225/70R19.5 LRF
PSI
65
70
75
80
85
90
95
kPa
450
480
520
550
590
620
660
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
2755
2895
3040
3195
3315
3450
3640
S
3640 LBS at
95 PSI
DUAL
5200
5440
5720
6000
6230
6490
6830
D
3415 LBS at
95 PSI
SINGLE
1250
1310
1380
1450
1500
1570
1650
S
1650 KG
at 660 kPa
DUAL
2360
2460
2600
2720
2820
2940
3100
D
1550 KG
at 660 kPa
225/70R19.5 LRG
PSI
65
70
75
80
85
90
95
100
105
110
kPa
450
480
520
550
590
620
660
690
720
760
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
2755
2895
3040
3195
3315
3450
3640
3715
3845
3970
S
3970 LBS at 110 PSI
DUAL
5200
5440
5720
6000
6230
6490
6830
6980
7230
7500
D
3750 LBS at 110 PSI
SINGLE
1250
1310
1380
1450
1500
1570
1650
1690
1740
1800
S
1800 KG
at 760 kPa
DUAL
2360
2460
2600
2720
2820
2940
3100
3160
3280
3400
D
1700 KG
at 760 kPa
245/70R19.5 LRF
PSI
80
85
90
95
kPa
550
590
620
660
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
3640
3740
3890
4080
S
4080 LBS at
95 PSI
DUAL
6830
7030
7310
7720
D
3860 LBS at
95 PSI
SINGLE
1650
1700
1770
1850
S
1850 KG
at 660 kPa
DUAL
3100
3180
3320
3500
D
1750 KG
at 660 kPa
245/70R19.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
3390
3570
3750
3925
4100
4270
4440
4610
4775
4940
S
4940 LBS at 120 PSI
DUAL
6420
6760
7100
7430
7760
8080
8400
8720
9040
9350
D
4675 LBS at 120 PSI
SINGLE
1540
1610
1700
1770
1860
1930
2000
2090
2150
2240
S
2240 KG
at 830 kPa
DUAL
2920
3060
3220
3360
3520
3660
3780
3960
4080
4240
D
2120 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
11
MICHELIN INFLATION CHARTS FOR RV USAGE ONLY
In the load and inflation tables, SINGLE means an axle with one tire mounted on each end, while DUAL means an axle
with two tires mounted on each end. The loads indicated represent the total weight of an axle end, in an RV application.
When one axle end weighs more than the other, use the heaviest of the two end weights to determine the unique tire
pressure for all tires on the axle. The maximum cold air pressure for each axle may vary, depending on their weights.
These tables are applicable for all RV axles, whether or not they are power-driven.
WHEEL DIAMETER - 22.5”
11R22.5 LRG
PSI
70
75
80
85
90
95
100
105
kPa
480
520
550
590
620
660
690
720
SINGLE
4530
4770
4990
5220
5510
5730
5950
6175
S
6175 LBS at 105 PSI
DUAL
8760
9160
9520
9900
10410
10830
11250
11680
D
5840 LBS at 105 PSI
SINGLE
2050
2160
2260
2370
2500
2600
2700
2800
S
2800 KG
at 720 kPa
DUAL
3980
4160
4320
4500
4720
4920
5120
5300
D
2650 KG
at 720 kPa
LBS
RV Tires
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
11R22.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
4770
4990
5220
5510
5730
5950
6175
6320
6465
6610
S
6610 LBS at 120 PSI
DUAL
9160
9520
9900
10410
10830
11250
11680
11790
11900
12010
D
6005 LBS at 120 PSI
SINGLE
2160
2260
2370
2500
2600
2700
2800
2870
2940
3000
S
3000 KG
at 830 kPa
DUAL
4160
4320
4500
4720
4920
5120
5300
5360
5420
5450
D
2725 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
12R22.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
5200
5450
5690
6005
6205
6405
6610
6870
7130
7390
S
7390 LBS at 120 PSI
DUAL
9980
10380
10780
11350
11570
11790
12010
12530
13050
13560
D
6780 LBS at 120 PSI
SINGLE
2360
2470
2580
2725
2820
2910
3000
3120
3240
3350
S
3350 KG
at 830 kPa
DUAL
4520
4700
4880
5150
5260
5360
5450
5680
5920
6150
D
3075 KG
at 830 kPa
255/70R22.5 LRH
PSI
80
85
90
95
100
105
110
115
120
kPa
550
590
620
660
690
720
760
790
830
SINGLE
4190
4370
4550
4675
4895
5065
5205
5400
5510
S
5510 LBS at 120 PSI
DUAL
7940
8220
8550
8820
8910
9220
9350
9830
10140
D
5070 LBS at 120 PSI
SINGLE
1900
1980
2060
2120
2220
2300
2360
2450
2500
S
2500 KG
at 830 kPa
DUAL
3600
3720
3880
4000
4040
4180
4240
4460
4600
D
2300 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
275/70R22.5 LRJ
PSI
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
6730
6940
LBS
KG
SINGLE
4940
5170
5400
5625
5850
6070
6290
6510
DUAL
9710
10160
10610
11050
11490
11930
12360
12790
SINGLE
2250
2340
2460
2550
2640
2750
2840
2950
DUAL
4420
4600
4820
5000
5180
5400
5580
5800
3040
3150
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
S
6940 LBS at 130 PSI
D
6395 LBS at 120 PSI
S
3150 KG
at 900 kPa
D
2900 KG
at 830 kPa
305/70R22.5 LRL
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
5375
5660
5940
6220
6495
6770
7040
7300
7570
7830
S
7830 LBS at 120 PSI
DUAL
9530
10030
10530
11030
11510
12000
12470
12950
13420
13880
D
6940 LBS at 120 PSI
SINGLE
2440
2550
2700
2810
2960
3060
3170
3310
3410
3550
S
3550 KG
at 830 kPa
DUAL
4340
4540
4800
4980
5240
5440
5620
5880
6060
6300
D
3150 KG
at 830 kPa
365/70R22.5 LRL
PSI
80
85
90
95
100
105
110
115
120
125
kPa
550
590
620
660
690
720
760
790
830
860
SINGLE
7350
7710
8070
8430
8780
9130
9480
9820
10200
10500
S
SINGLE
3320
3510
3660
3840
3980
4120
4300
4440
4620
4750
S
LBS
KG
12
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
10500 LBS at 125 PSI
4750 KG
at 860 kPa
MICHELIN INFLATION CHARTS FOR RV USAGE ONLY
In the load and inflation tables, SINGLE means an axle with one tire mounted on each end, while DUAL means an axle
with two tires mounted on each end. The loads indicated represent the total weight of an axle end, in an RV application.
When one axle end weighs more than the other, use the heaviest of the two end weights to determine the unique tire
pressure for all tires on the axle. The maximum cold air pressure for each axle may vary, depending on their weights.
These tables are applicable for all RV axles, whether or not they are power-driven.
WHEEL DIAMETER - 22.5”
235/80R22.5 LRG
70
75
80
85
90
95
100
105
110
kPa
480
520
550
590
620
660
690
720
760
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
3470
3645
3860
3975
4140
4300
4455
4610
4675
S
4675 LBS at 110 PSI
DUAL
6320
6630
7050
7230
7530
7940
8110
8390
8820
D
4410 LBS at 110 PSI
SINGLE
1570
1650
1750
1800
1880
1950
2020
2090
2120
S
2120 KG
at 760 kPa
DUAL
2860
3000
3200
3280
3420
3600
3680
3800
4000
D
2000 KG
at 760 kPa
255/80R22.5 LRG
PSI
70
75
80
85
90
95
100
105
110
kPa
480
520
550
590
620
660
690
720
760
LBS
KG
RV Tires
PSI
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
3875
4070
4300
4440
4620
4805
4975
5150
5205
S
5205 LBS at 110 PSI
DUAL
7050
7410
7720
8080
8410
8820
9050
9370
9610
D
4805 LBS at 110 PSI
SINGLE
1760
1850
1950
2010
2100
2180
2260
2340
2360
S
2360 KG
at 760 kPa
DUAL
3200
3360
3500
3660
3820
4000
4100
4260
4360
D
2180 KG
at 760 kPa
275/80R22.5 LRG
PSI
70
75
80
85
90
95
100
105
110
kPa
480
520
550
590
620
660
690
720
760
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
4500
4725
4940
5155
5370
5510
5780
5980
6175
S
6175 LBS at 110 PSI
DUAL
8190
8600
9080
9380
9770
10140
10520
10880
11350
D
5675 LBS at 110 PSI
SINGLE
2040
2140
2240
2340
2440
2500
2620
2710
2800
S
2800 KG
at 760 kPa
DUAL
3720
3900
4120
4260
4440
4600
4780
4940
5150
D
2575 KG
at 760 kPa
275/80R22.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
4915
5175
5435
5690
5940
6190
6435
6680
6920
7160
S
7160 LBS at 120 PSI
DUAL
9080
9560
10030
10500
10970
11430
11880
12330
12780
13220
D
6610 LBS at 120 PSI
SINGLE
2240
2340
2470
2570
2710
2800
2900
3030
3120
3250
S
3250 KG
at 830 kPa
DUAL
4120
4320
4560
4760
5000
5180
5360
5600
5760
6000
D
3000 KG
at 830 kPa
295/80R22.5 LRH
PSI
75
80
85
90
95
100
105
110
1150
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
5375
5660
5940
6220
6495
6770
7040
7300
7570
7830
S
7830 LBS at 120 PSI
DUAL
9530
10030
10530
11030
11510
12000
12470
12950
13420
13880
D
6940 LBS at 120 PSI
SINGLE
2440
2550
2700
2810
2960
3060
3170
3310
3410
3550
S
3550 KG
at 830 kPa
DUAL
4340
4540
4800
4980
5240
5440
5620
5880
6060
6300
D
3150 KG
at 830 kPa
315/80R22.5 LRL
PSI
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
6415
6670
6940
7190
7440
7610
7920
8270
8810
9090
S
DUAL
11680
12140
12790
13090
13540
13880
14420
15220
16020
16540
D
9090 LBS at 130 PSI
8270 LBS at 130 PSI
SINGLE
2910
3030
3150
3260
3370
3450
3590
3750
3980
4125
S
4125 KG
at 900 kPa
DUAL
5300
5500
5800
5940
6140
6300
6540
6900
7240
7500
D
3750 KG
at 900 kPa
13
MICHELIN INFLATION CHARTS FOR RV USAGE ONLY
In the load and inflation tables, SINGLE means an axle with one tire mounted on each end, while DUAL means an axle
with two tires mounted on each end. The loads indicated represent the total weight of an axle end, in an RV application.
When one axle end weighs more than the other, use the heaviest of the two end weights to determine the unique tire
pressure for all tires on the axle. The maximum cold air pressure for each axle may vary, depending on their weights.
These tables are applicable for all RV axles, whether or not they are power-driven.
WHEEL DIAMETER - 24.5”
11R24.5 LRG
PSI
70
75
80
85
90
95
100
105
kPa
480
520
550
590
620
660
690
720
SINGLE
4820
5070
5310
5550
5840
6095
6350
6610
S
6610 LBS at 105 PSI
DUAL
9320
9740
10140
10520
11020
11350
11680
12010
D
6005 LBS at 105 PSI
SINGLE
2190
2300
2410
2520
2650
2770
2890
3000
S
3000 KG
at 720 kPa
DUAL
4220
4420
4600
4780
5000
5160
5320
5450
D
2725 KG
at 720 kPa
LBS
RV Tires
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
305/75R24.5 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
5680
5980
6275
6570
6860
7150
7430
7710
7990
8270
S
8270 LBS at 120 PSI
DUAL
9830
10350
10870
11380
11880
12380
12870
13360
13840
14320
D
7160 LBS at 120 PSI
SINGLE
2580
2700
2850
2970
3120
3230
3350
3490
3600
3750
S
3750 KG
at 830 kPa
DUAL
4480
4680
4940
5140
5420
5600
5800
6060
6240
6500
D
3250 KG
at 830 kPa
275/80R24.5 LRG
PSI
70
75
80
85
90
95
100
105
110
kPa
480
520
550
590
620
660
690
720
760
SINGLE
4545
4770
4940
5210
5420
5675
5835
6040
6175
S
6175 LBS at 110 PSI
DUAL
8270
8680
9080
9480
9860
10410
10620
10990
11350
D
5675 LBS at 110 PSI
SINGLE
2060
2160
2240
2360
2460
2575
2650
2740
2800
S
2800 KG
at 760 kPa
DUAL
3740
3940
4120
4300
4480
4720
4820
4980
5150
D
2575 KG
at 760 kPa
LBS
KG
14
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
Commercial Light
Truck Tires
Commercial
Light Truck Tires
15
MICHELIN COMMERCIAL
LIGHT TRUCK TIRE REFERENCE CHART
ALL-TERRAIN RADIALS
ALL-SEASON RADIALS
LTX A/S
LTX M/S
LTX A/T
• Designed to meet
demanding O.E.
requirements
• Smooth and even wear
in commercial applications
• Exceptional wet, snow
and off-highway traction
• Exceptional mileage
• Smooth and quiet ride
• Off-highway durability
• Quiet and comfortable
ride on highway
®
®
®
Commercial Light
Truck Tires
RIB RADIALS
XPS RIB
TRACTION RADIALS
XCA
XPS TRACTION
• All-wheel-position
highway rib
• High mileage and
excellent fuel economy
• Designed for
commercial applications
• All-steel construction
• Fully retreadable
• Excellent on/off road
traction
• Designed for commercial operations
®
®
• All-steel construction
• Fully retreadable
• Exceptional mileage in
commercial operations
®
PRODUCT AVAILABILITY
A letter entry indicates the load range(s) in which Michelin markets a particular tread design and size. Tread Depth (32nds) is listed to the right of the load range(s).
SIZES
LTX
A/S
LT235/75R15
LTX
M/S
LTX
A/T
C ⁄ 13
C ⁄ 15
7.50R16
XPS
TRACTION
XCA
D ⁄ 13
LT215/85R16
E ⁄ 13
DE ⁄ 15
D ⁄ 16
E ⁄ 15
LT225/75R16
E ⁄ 13
DE ⁄ 15
D ⁄ 16
E ⁄ 14
LT235/85R16
E ⁄ 14
DE ⁄ 15
E ⁄ 16
E ⁄ 15
LT245/75R16
E ⁄ 14
E ⁄ 15
E ⁄ 16
E ⁄ 15
LT265/75R16
E ⁄ 15
E ⁄ 14
C ⁄ 16
9.50R16.5
E ⁄ 17
E ⁄ 17
E ⁄ 13
7.50R17
16
XPS
RIB
D ⁄ 13
LT245/70R17
E ⁄ 15
LT265/70R17
E ⁄ 15
LTX A/S
®
For jobs that demand a lot of driving in varied seasons and conditions,
Michelin LTX A/S tires help provide excellent all-season traction. They also
have a remarkably quiet ride thanks to a tread block pattern that helps
minimize road noise, and offers a variety of tread patterns designed for
specific original equipment vehicle models and applications.
®
Key Benefits:
• Exceptionally quiet ride
• Excellent all-season traction
• Extra-long tread life
• Versatile truck, SUV or trailer use
Tire Specifics:
• Original equipment on vehicles such as:
2004 Dodge Ram Pickups
2004 Jeep Grand Cherokee LTD
2004 Ford F-150
Specifications for Tread Design:
Max
Load Catalog Tread Speed
Range Number Depth
(2)
32nds mph
Size (1)
Loaded
Radius
in.
mm.
LTX A/S
®
Overall
Diameter
in.
mm.
Overall
Width (3)
in.
mm.
Approved
Rims (4)
Min. Dual
Spacing (3)
in.
mm.
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
kPa
lbs.
LT215/85R16
E
41550
13
100
14.2
360
30.3
770
8.7
221
6.00, 5.50, 7.00
9.90
251
687
2680
80
1215
550
2470
80
1120
550
kPa
LT225/75R16
E
46049
13
100
13.7
347
29.3
745
9.1
231
6.50, 6.00, 7.00 10.40
264
709
2680
80
1215
550
2470
80
1120
550
LT235/85R16
E
15038
14
100
14.8
376
31.8
808
9.2
234
7.00, 6.50, 7.50 10.60
269
653
3042
80
1380
550
2778
80
1120
550
LT245/75R16
E
63532
14
100
14.4
366
30.6
777
9.6
244
6.50, 6.00, 7.00 11.10
282
679
3042
80
1380
550
2778
80
1260
550
LT265/75R16
E
54264
13
100
14.8
376
31.8
808
10.6
269
7.50, 7.00, 8.00 12.20
310
654
3415
80
1550
550
3085
80
1400
550
LT245/70R17
E
90771
15
100
14.4
366
30.6
777
9.5
241
7.50, 6.50, 7.50 11.54
293
675
3000
80
1360
550
2755
80
1250
550
LT265/70R17
E
83116
15
100
14.6
371
31.4
798
10.4
264
8.00, 7.00, 8.50 12.40
316
657
3195
80
1450
550
2910
80
1320
LTX M/S COMMERCIAL
®
Commercial Light
Truck Tires
®
Given its exceptional blend of all-season traction, smooth, comfortable ride
and durable, long-lasting tread design, this commercial version of our bestselling Michelin LTX M/S tire makes plenty of sense for all types of
commercial applications. A third steel belt (in the D and E load ranges) also
helps to protect against punctures helping Michelin LTX M/S Commercial tires
handle rough terrain.
®
®
®
Key Benefits:
• Exceptional comfort in a commercial tire
• Maximized puncture resistance
Specifications for Tread Design:
Max
Load Catalog Tread Speed
Range Number Depth
(2)
32nds mph
Size (1)
Loaded
Radius
in.
mm.
®
Tire Specifics:
• Available commercial replacement coverage**
** See warranty book for details.
LTX M/S
®
Overall
Diameter
in.
mm.
Overall
Width (3)
in.
mm.
Approved
Rims (4)
Min. Dual
Spacing (3)
in.
mm.
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
kPa
lbs.
LT235/75R15
C
78868
13
100
13.5
343
28.8
732
9.5
241 6.50, 6.00, 7.00 10.75
273
727
1985
50
900
350
1820
50
LT215/85R16
D
20898
15
100
14.2
360
30.5
775
8.7
221 6.00, 5.50, 7.00 9.90
251
685
2335
65
1060
450
2150
LT215/85R16
E
57810
15
100
14.2
360
30.5
775
8.7
221 6.00, 5.50, 7.00 9.90
251
685
2680
80
1215
550
2470
LT225/75R16
D
00978
15
100
13.7
347
29.3
744
9.1
231 6.00, 6.50, 7.00 10.20
259
709
2335
65
1060
450
2150
LT225/75R16
E
25516
15
100
13.7
347
29.4
747
8.8
224 6.00, 6.50, 7.00 10.20
259
709
2680
80
1215
550
2470
LT235/85R16
D
06854
15
100
14.8
376
31.9
810
9.2
234 6.00, 6.50, 7.00 10.60
269
655
2623
65
1190
450
LT235/85R16
E
07364
15
100
14.8
376
32.0
813
9.3
236 6.50, 6.00, 7.00 10.80
274
654
3042
80
1380
550
LT245/75R16
E
22606
15
100
14.6
371
30.7
780
9.8
249 7.00, 6.50, 7.50 11.34
288
681
3042
80
1380
LT265/75R16
E
52169
14
100
14.8
376
31.8
808
10.7
272 7.50, 7.00, 8.00 12.20
310
652
3415
80
1550
kPa
825
350
65
975
450
80
1120
550
65
975
450
80
1120
550
2381
65
1080
450
2778
80
1260
550
550
2778
80
1260
550
550
3085
80
1400
550
Note: All comparisons are between Michelin tires within this category.
(1) Sizes listed do not include P-metric and floatation dimensions. For full range of products refer to “Michelin Data Book” No. MDL41080.
(2) Exceeding the lawful speed limit is neither recommended nor endorsed.
(3) Tire section widths and overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
(4) Range of approved rim widths. For specific rim profiles and measuring rim, refer to “Michelin Data Book” No. MDL41080.
DANGER: Never mount a 16" diameter tire on a 16.5" rim.
WARNING: Serious or fatal injury may result from tire failure due to underinflation/overinflation/overloading. To ensure correct air pressure and vehicle load, refer to
vehicle owner’s manual or tire information placard in the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper
mounting. Only tire professionals should mount tires, and they should never inflate beyond 40 psi to seat the beads. See Tire Dealer for proper mounting. Before
mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner’s manual for recommendations.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
®
17
LTX A/T COMMERCIAL
®
When the job takes you to locations that the road doesn’t, you can count on
the all-terrain traction and durability of Michelin LTX A/T Commercial tires.
Self-cleaning treads, a unique tread pattern and water-channeling grooves
all contribute to the off-road prowess of Michelin LTX A/T Commercial tires.
®
®
®
Key Benefits:
• Dependable off-road traction and control
• Durable construction that help resist damage
®
Tire Specifics:
• Available commercial replacement
coverage**
** See warranty book for details.
Specifications for Tread Design:
Max
Load Catalog Tread Speed
Range Number Depth
(2)
32nds mph
Size (1)
Loaded
Radius
in.
mm.
LTX A/T
®
Overall
Diameter
in.
mm.
Overall
Width (3)
in.
mm.
Approved
Rims (4)
Min. Dual
Spacing (3)
in.
mm.
Revs
per
Mile
Max. Tire Load
Dual
psi
kg.
Commercial Light
Truck Tires
kPa
lbs.
LT235/75R15
C
38468
15
100
13.5
343
28.9
734
9.5
241 6.50, 6.00, 7.00 10.75
273
726
1985
50
900
350
1820
50
825
350
LT215/85R16
D
34130
16
100
14.2
360
30.5
775
8.7
221 6.00, 5.50, 7.00 9.90
251
684
2335
65
1060
450
2150
65
975
450
LT225/75R16
D
30752
16
100
13.7
347
29.5
749
9.0
229
10.20
259
708
2335
65
1060
450
2150
65
975
450
LT235/85R16
E
17982
16
100
14.8
376
32.0
813
9.3
236 6.50, 6.00, 7.00 10.80
274
653
3042
80
1380
550
2778
80
1260
550
LT245/75R16
E
33566
16
100
14.5
368
30.8
782
9.7
246 7.00, 6.50, 7.50 11.34
288
680
3042
80
1380
550
2778
80
1260
550
LT265/75R16
C
05100
16
100
14.8
376
31.9
810
10.9
277 7.50, 7.00, 8.00 12.20
310
657
2470
50
1120
350
2270
50
1030
350
XPS RIB
6.00, 7.00
lbs.
Max. Tire Load
Single
psi
kg.
kPa
®
Michelin XPS Rib tires are the best value per mile in the Michelin
commercial tire lineup and a smart choice for commercial trailers
because of low rolling resistance (for better fuel economy), a long-wear
rib tread design and retreadability. These tires also have the strength
of reinforced all-steel construction for lasting durability.
®
®
Key Benefits:
• Responsive handling helps you
negotiate through tough traffic
• Excellent wet traction
Tire Specifics:
• Lowest cost per mile in this category
• Retreadable
• All-wheel-position tire
Specifications for Tread Design:
Size
Max
Load Catalog Tread Speed
Range Number Depth
(2)
32nds mph
(1)
Loaded
Radius
in.
mm.
XPS RIB
Overall
Diameter
in.
mm.
®
Overall
Width (3)
in.
mm.
Approved
Rims (4)
Min. Dual
Spacing (3)
in.
mm.
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
kPa
lbs.
7.50R16
D
10818
13
75
14.7
374
31.8
808
8.3
211 6.00, 5.50, 6.50 9.53
242
654
2470
65
1120
450
2150
65
975
450
kPa
LT215/85R16
E
39510
15
75
14.2
360
30.5
775
8.9
225 6.00, 5.50, 7.00 9.88
251
687
2680
80
1215
550
2470
80
1120
550
LT225/75R16
E
08404
14
75
13.7
347
29.4
746
9.0
229 6.50, 6.00, 7.00 10.39
264
706
2680
80
1215
550
2470
80
1120
550
LT235/85R16
E
13080
15
75
14.8
376
32.2
818
9.7
246
6.00, 7.00
10.60
269
655
3042
80
1380
550
2778
80
1260
550
LT245/75R16
E
26848
15
75
14.4
366
30.6
777
9.6
244
7.00
11.34
288
676
3042
80
1380
550
2778
80
1260
550
9.50R16.5
E
03530
13
75
14.0
355
30.4
772
9.4
239
6.75, 8.25
10.4
264
686
3195
80
1450
550
2835
80
1285
550
Note: All comparisons are between Michelin tires within this category.
(1) Sizes listed do not include P-metric and floatation dimensions. For full range of products refer to “Michelin Data Book” No. MDL41080.
(2) Exceeding the lawful speed limit is neither recommended nor endorsed.
(3) Tire section widths and overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
(4) Range of approved rim widths. For specific rim profiles and measuring rim, refer to “Michelin Data Book” No. MDL41080.
DANGER: Never mount a 16" diameter tire on a 16.5" rim.
WARNING: Serious or fatal injury may result from tire failure due to underinflation/overinflation/overloading. To ensure correct air pressure and vehicle load, refer to
vehicle owner’s manual or tire information placard in the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper
mounting. Only tire professionals should mount tires, and they should never inflate beyond 40 psi to seat the beads. See Tire Dealer for proper mounting. Before
mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner’s manual for recommendations.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligation.
®
18
XPS TRACTION
®
Thanks to their rugged lug tread design, Michelin XPS Traction tires help
provide exceptional traction, especially in mud. Michelin XPS Traction tires
are built of a durable all-steel casing and are easily retreaded, thus they are
a smart, economical choice as well.
®
®
®
®
Key Benefits:
• On- and off-road capabilities
• Easily retreadable all-steel casing
• Exceptional durability
• All-wheel-position tire
Specifications for Tread Design:
Max
Load Catalog Tread Speed
Range Number Depth
(2)
32nds mph
Size (1)
Loaded
Radius
in.
mm.
XPS TRACTION
Overall
Diameter
in.
mm.
Overall
Width (3)
in.
mm.
Approved
Rims (4)
®
Min. Dual
Spacing (3)
in.
mm.
Revs
per
Mile
Max. Tire Load
Dual
psi
kg.
lbs.
E
35260
17
75
14.3
363
30.7
780
8.8
224 6.00, 5.50, 7.00 9.90
251
681
2680
80
1215
550
2470
80
1120
550
kPa
LT235/85R16
E
36496
17
75
14.8
376
32.0
813
9.6
245 6.50, 6.00, 7.00 10.80
274
655
3042
80
1380
550
2778
80
1260
550
Commercial Light
Truck Tires
kPa
LT215/85R16
XCA
lbs.
Max. Tire Load
Single
psi
kg.
®
The all-position steel radial designed for high mileage in light
commercial applications.
• Wide circumferential grooves for optimized water evacuation on wet surfaces and
excellent traction
• Application specific compound engineered for resistance to scrub and irregular wear
• Tough steel belt and steel casing combine to help deliver outstanding retreadability
Specifications for Tread Design:
Max
Load Catalog Tread Speed
Range Number Depth
(2)
32nds mph
Size (1)
7.50R17
D
23176
13
75
Loaded
Radius
in.
mm.
15.6
396
XCA
Overall
Diameter
in.
mm.
33.5
850
®
Overall
Width (3)
in.
mm.
8.2
209
Approved
Rims (4)
6.00
Min. Dual
Spacing (3)
in.
mm.
9.50
242
Revs
per
Mile
lbs.
621
2800
Max. Tire Load
Single
psi
kg.
75
1270
kPa
lbs.
520
2600
Max. Tire Load
Dual
psi
kg.
75
1180
kPa
520
Note: All comparisons are between Michelin tires within this category.
(1) Sizes listed do not include P-metric and floatation dimensions. For full range of products refer to “Michelin Data Book” No. MDL41080.
(2) Exceeding the lawful speed limit is neither recommended nor endorsed.
(3) Tire section widths and overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
(4) Range of approved rim widths. For specific rim profiles and measuring rim, refer to “Michelin Data Book” No. MDL41080.
DANGER: Never mount a 16" diameter tire on a 16.5" rim.
WARNING: Serious or fatal injury may result from tire failure due to underinflation/overinflation/overloading. To ensure correct air pressure and vehicle load, refer to
vehicle owner’s manual or tire information placard in the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper
mounting. Only tire professionals should mount tires, and they should never inflate beyond 40 psi to seat the beads. See Tire Dealer for proper mounting. Before
mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner’s manual for recommendations.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligation.
®
19
MICHELIN INFLATION CHARTS FOR LIGHT TRUCK TIRES
To select the proper load and inflation table, locate
your tire size in the following pages, then match your
tire's sidewall markings to the table with the same
sidewall markings. If your tire's sidewall markings do not
match any table listed, please contact your Michelin
dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant
state of change, and Michelin continually updates its
product information to reflect these changes. Printed
material may not reflect the latest load and inflation
standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 15”
LT235/75R15 LRC
PSI
35
40
45
50
kPa
250
280
310
350
SINGLE
3060
3360
3650
3970
S
1985 LBS AT
50 PSI
DUAL
5560
6120
6640
7280
D
1820 LBS AT
50 PSI
SINGLE
1420
1525
1655
1800
S
900 KG
AT 350 kPa
DUAL
2580
2775
3010
3300
D
825 KG
AT 350 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
Commercial Light
Truck Tires
WHEEL DIAMETER - 16”
7.50R16 LRD
PSI
35
40
45
50
55
60
65
kPa
250
280
310
350
380
410
450
SINGLE
3240
3540
3860
4080
4380
4620
4940
S
2470 LBS AT
65 PSI
DUAL
5720
6260
6760
7280
7720
8160
8600
D
2150 LBS AT
65 PSI
SINGLE
1470
1610
1750
1850
1990
2100
2240
S
1120 KG
AT 450 kPa
DUAL
2600
2840
3060
3300
3500
3700
3900
D
975 KG
AT 450 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT215/85R16 LRD
PSI
35
40
45
50
55
60
65
kPa
250
280
310
350
380
410
450
SINGLE
2990
3280
3570
3880
4100
4360
4670
S
2335 LBS AT
65 PSI
DUAL
5440
5960
6500
7060
7460
7940
8600
D
2150 LBS AT
65 PSI
SINGLE
1990
1488
1619
1760
1860
1978
2120
S
1060 KG
AT 450 kPa
DUAL
2520
2703
2948
3200
3384
3602
3900
D
975 KG
AT 450 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT215/85R16 LRE
PSI
35
40
45
50
55
60
65
70
75
80
kPa
250
280
310
350
380
410
450
480
520
550
SINGLE
2990
3280
3570
3880
4100
4360
4670
4860
5100
5360
S
2680 LBS AT
80 PSI
DUAL
5440
5960
6500
7060
7460
7940
8600
8840
9280
9880
D
2470 LBS AT
80 PSI
SINGLE
1990
1488
1619
1760
1860
1978
2120
2205
2313
2430
S
1215 KG
AT 550 kPa
DUAL
2520
2703
2948
3200
3384
3602
3900
4010
4209
4480
D
1120 KG
AT 550 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT225/75R16 LRC
PSI
35
40
45
50
kPa
250
280
310
350
SINGLE
3000
3300
3580
3880
S
1940 LBS AT
50 PSI
DUAL
5460
6000
6520
7060
D
1765 LBS AT
50 PSI
SINGLE
1400
1497
1624
1760
S
880 KG
AT 350 kPa
DUAL
2540
2721
2957
3200
D
800 KG
AT 350 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT225/75R16 LRD
PSI
35
40
45
50
55
60
65
kPa
250
280
310
350
380
410
450
SINGLE
3000
3300
3580
3880
4120
4380
4670
S
2335 LBS AT
65 PSI
DUAL
5460
6000
6520
7060
7500
7980
8600
D
2150 LBS AT
65 PSI
SINGLE
1400
1490
1620
1760
1870
1990
2120
S
1060 KG
AT 450 kPa
DUAL
2540
2720
2960
3200
3400
3620
3900
D
975 KG
AT 450 kPa
LBS
KG
20
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
To select the proper load and inflation table, locate
your tire size in the following pages, then match your
tire's sidewall markings to the table with the same
sidewall markings. If your tire's sidewall markings do not
match any table listed, please contact your Michelin
dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant
state of change, and Michelin continually updates its
product information to reflect these changes. Printed
material may not reflect the latest load and inflation
standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 16”
LT225/75R16 LRE
PSI
35
40
45
50
55
60
65
70
75
80
kPa
250
280
310
350
380
410
450
480
520
550
SINGLE
3000
3300
3580
3880
4120
4380
4670
4880
5120
5360
S
2680 LBS AT
80 PSI
DUAL
5460
6000
6520
7060
7500
7980
8600
8880
9320
9880
D
2470 LBS AT
80 PSI
SINGLE
1400
1500
1625
1760
1870
1990
2120
2215
2320
2430
S
1215 KG
AT 550 kPa
DUAL
2540
2720
2960
3200
3400
3620
3900
4030
4230
4480
D
1120 KG
AT 550 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT235/85R16 LRD
PSI
35
40
45
50
55
60
65
kPa
250
280
310
350
380
410
450
SINGLE
3400
3740
4060
4410
4670
4970
5246
S
2623 LBS AT
65 PSI
DUAL
6180
6800
7380
8024
8500
9040
9524
D
2381 LBS AT
65 PSI
SINGLE
1580
1696
1842
2000
2118
2254
2380
S
1190 KG
AT 450 kPa
DUAL
2880
3084
3348
3640
3856
4100
4320
D
1080 KG
AT 450 kPa
KG
LT235/85R16 LRE
PSI
35
40
45
50
55
60
65
70
75
80
kPa
250
280
310
350
380
410
450
480
520
550
SINGLE
3400
3740
4060
4410
4670
4970
5246
5530
5810
6084
S
3042 LBS AT
80 PSI
DUAL
6180
6800
7380
8024
8500
9040
9524
10060
10580
11112
D
2778 LBS AT
80 PSI
SINGLE
1580
1696
1842
2000
2118
2254
2380
2508
2635
2760
S
1380 KG
AT 550 kPa
DUAL
2880
3084
3348
3640
3856
4100
4320
4563
4799
5040
D
1260 KG
AT 550 kPa
LBS
KG
Commercial Light
Truck Tires
LBS
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT245/75R16 LRE
PSI
35
40
45
50
55
60
65
70
75
80
kPa
250
280
310
350
380
410
450
480
520
550
SINGLE
3400
3730
4060
4410
4670
4960
5250
5530
5800
6084
S
3042 LBS AT
80 PSI
DUAL
6180
6780
7380
8024
8500
9020
9525
10060
10560
11112
D
2778 LBS AT
80 PSI
SINGLE
1580
1690
1840
2000
2120
2250
2380
2510
2630
2760
S
1380 KG
AT 550 kPa
DUAL
2880
33075
3350
3640
3855
4090
4320
4560
4790
5040
D
1260 KG
AT 550 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT265/75R16 LRC
PSI
35
40
45
50
kPa
250
280
310
350
SINGLE
3820
4200
4560
4940
S
2470 LBS AT
50 PSI
DUAL
6960
7640
8300
8600
D
2270 LBS AT
50 PSI
SINGLE
1780
2020
2240
2240
S
1120 KG
AT 350 kPa
DUAL
3600
4120
4600
3900
D
1030 KG
AT 350 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT265/75R16 LRE
PSI
35
40
45
50
55
60
65
70
75
80
kPa
250
280
310
350
380
410
450
480
520
550
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
3820
4200
4560
4940
5250
5580
6000
6210
6520
6830
S
3415 LBS AT
80 PSI
DUAL
6960
7640
8300
9080
9560
10160
11020
11300
11860
12340
D
3085 LBS AT
80 PSI
SINGLE
1780
1905
2070
2240
2380
2530
2720
2815
2960
3100
S
1550 KG
AT 550 kPa
DUAL
3240
3465
3765
4120
4340
4610
5000
5125
5380
5600
D
1400 KG
AT 550 kPa
21
To select the proper load and inflation table, locate
your tire size in the following pages, then match your
tire's sidewall markings to the table with the same
sidewall markings. If your tire's sidewall markings do not
match any table listed, please contact your Michelin
dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant
state of change, and Michelin continually updates its
product information to reflect these changes. Printed
material may not reflect the latest load and inflation
standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 16”
8.75R16.5 LRE
PSI
30
35
40
45
50
55
60
65
70
75
kPa
210
240
280
310
340
380
410
450
480
520
SINGLE
2580
2910
3240
3560
3880
4180
4480
4780
5070
5360
S
2680 LBS AT
75 PSI
DUAL
4900
5540
6160
6780
7380
7960
8540
9100
9660
10200
D
2550 LBS AT
75 PSI
SINGLE
1180
1300
1480
1600
1720
1880
2000
2160
2260
2420
S
1215 KG
AT 520 kPa
DUAL
2240
2480
2840
3080
3320
3600
3840
4120
4360
4640
D
1155 KG
AT 520 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
Commercial Light
Truck Tires
WHEEL DIAMETER - 16.5”
9.50R16.5 LRE
PSI
45
50
55
60
65
70
75
80
kPa
310
340
380
410
450
480
520
550
SINGLE
3750
4105
4475
4835
5245
5560
5950
6340
S
3170 LBS AT
80 PSI
DUAL
7145
7825
8520
9205
9995
10560
11300
12040
D
3010 LBS AT
80 PSI
SINGLE
1700
1860
2030
2190
2380
2520
2700
2880
S
1438 KG
AT 550 kPa
DUAL
3240
3550
3860
4180
4530
4790
5130
5460
D
1365 KG
AT 550 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
WHEEL DIAMETER - 17”
7.50R17 LRD
PSI
50
55
60
65
70
75
kPa
350
380
410
450
480
520
SINGLE
4010
4270
4540
4800
5150
5510
S
2755 LBS AT
75 PSI
DUAL
7490
8110
8634
9160
9690
10400
D
2600 LBS AT
75 PSI
SINGLE
1820
1940
2060
2180
2340
2500
S
1250 KG
AT 520 kPa
DUAL
3400
3680
3920
4160
4400
4720
D
1180 KG
AT 520 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT245/70R17 LRE
PSI
35
40
45
50
55
60
65
70
75
80
kPa
250
280
310
350
380
410
450
480
520
550
SINGLE
3380
3710
4020
4410
4630
4920
5200
5480
5750
6000
S
3000 LBS AT
80 PSI
DUAL
6160
6760
7320
7940
8420
8960
9340
9980
10460
11020
D
2755 LBS AT
80 PSI
SINGLE
1570
1685
1825
2000
2100
2230
2360
2485
2610
2720
S
1360 KG
AT 550 kPa
DUAL
2860
3065
3320
3600
3820
4065
4240
4525
4745
5000
D
1250 KG
AT 550 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
LT265/70R17 LRE
PSI
35
40
45
50
55
60
65
70
75
80
kPa
250
280
310
350
380
410
450
480
520
550
SINGLE
3780
4150
4510
4940
5190
5520
5820
6010
6200
6390
S
3195 LBS AT
80 PSI
DUAL
6880
7560
8200
9080
9440
10040
10720
10940
11280
11640
D
2910 LBS AT
80 PSI
SINGLE
1760
1880
2044
2240
2360
2500
2640
2730
2800
2900
S
1450 KG
AT 550 kPa
DUAL
3200
3440
3720
4120
4280
4560
4860
4960
5120
5280
D
1320 KG
AT 550 kPa
LBS
KG
22
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
Truck Tires
Truck Tires
23
TREAD PATTERN DESIGNATIONS
Michelin uses specific numbers or letters to identify different types of tread patterns
or casing construction.
X
Michelin
Radial
Trademark
®
D
A
Position
Application
3
™
Index
(Used to denote
product evolution
or attributes)
For example:
X
Index
Truck Tires
Application
Position
®
24
=
Michelin radial
D
=
Drive
T
=
Trailer
Z
=
All position
F
=
Front (Steer)
A
=
Highway applications
E
=
Regional applications
Y
=
80% On-road use, 20% Off-road use
U
=
Urban
L
=
20% On-road use, 80% Off-road use
=
Anti-chip / cut-resistant compound
HT
=
High Torque
Energy
=
Fuel Efficient
X One
=
One tire replacing 2 traditional duals
M/S
=
Mud and Snow
A/T
=
All Terrain
S
=
Severe Service
®
TIRE APPLICATIONS
The specific tread design used should only be considered after the vehicle type and user
vocation has been examined.
There are several categories of tire service applications:
HIGHWAY
REGIONAL
ON/OFF ROAD
A
Primarily interstate or divided highway.
E
Medium to heavy loads, frequently on 2-lane roads.
Vehicles generally return to home base at night.
Y
Heavy loads and slower speeds, operating on a mixture
of improved secondary and aggressive road surface.
U
URBAN
Heavy loads and high speeds for extended periods of time.
Stop-and-go delivery ... service within a limited radius –
metro and suburban.
L
Very heavy loads normally on poor or
unimproved surfaces.
Truck Tires
ON/OFF ROAD
PRODUCT SEGMENTATION
Application Stress
MICHELIN
SEGMENTS
MARKET
SEGMENTS
VOCATIONS
A
Long Haul
• Truckload Carrier
E
Regional
Y
On/Off Road
L - OFF ROAD
U
Urban
•
•
•
•
•
•
•
Public Utilities
School Bus
Food Distribution
Petroleum Delivery
Courier and Delivery Service
Manufacturing
Auto Carriers
On/Off
Urban
Regional
Surface
Aggression
Long Haul
• Construction and Mining
• Forestry and Logging
• Oil Field
• Urban Buses
• Sanitation and Refuse
25
MICHELIN TRUCK TIRE REFERENCE CHART
STEER/ALL-POSITION TIRES
XZA3
®
R
O/O
XZA2 Energy
XZA -1+
XZA 1
• Advanced Technology™
compounding offers
excellent fuel economy
• Engineered for irregular
wear resistance
• 7/7/3* casing limited
warranty
• 365/70R22.5 available in
XZA tread design
• Optimized channel
design allows for long
tread life and minimized irregular wear
• Low rolling resistance
compounds for fuel
economy in highway
service
• Optimized for steer axle
service
• Decoupling groove
built for resistance to
irregular wear
• Optimized for steer axle
• Built for highway
service
• Optimized for steer axle
• Variable groove angles
help reduce irregular
wear
®
• Ultra-long haul tire
that helps deliver long
original life
• 19/32nd tread depth
• Directional tread built
for irregular wear
resistance and fuel
economy
• 7/7/3* casing limited
warranty
LH
XZA2 /XZ2
U
®
LH
®
Truck Tires
• Exclusively for
motorhome use
• Cool running tread
design
• Excellent ozone
resistance in sidewalls
R
O/O
R
O/O
XZE
XRV
LH
®
U
U
®
R
O/O
U
XZY 3
XZU 3
• New tread compound
offers excellent protection against aggression,
chipping and scaling
• Groove bottom protectors help guard against
stone penetrations
• Extra robust casing
construction for
maximized retreadability
• Optimized for Urban
operation with frequent starts and stops
• Regrooving depth
indicators
• Matrix sipes help
provide excellent
traction and even wear
throughout life of tire
®
LH
R
O/O
R
O/O
O/O
U
LH
U
R
O/O
®
U
LH
R
O/O
XZA
XZY-2
• Buttressed shoulder
helps resist wear in
high scrub applications
• Full-depth sipes offer
exceptional traction
throughout the usable
life of the tire
• Excellent steer tire for
regional operation
• Designed for long
mileage and even
tread wear
• Durable casing
(Low profile sizes)
• Cut and chip resistant
tread compound
• Buttressed shoulders
• Four belt crown package for casing life
LH
®
R
O/O
U
®
LH
R
O/O
O/O
U
XZU S
LH
R
O/O
R
O/O
®
• 10,000 lb/tire capacity
at 65 mph
• Helps improve bead
durability from extra
long metallic chafter
• Long tread life in high
scrub service from
application specific
tread compound
U
LH
®
®
™
®
™
U
X One XZU S
®
®
• Optimized for Urban
operation with
frequent starts and
stops
• Regrooving depth
indicators
• Increased sidewall
protection and thickness indicators
LH
R
U
®
• Optimized for weight
savings in urban and
regional operation
• Reinforced bead package for resistance to
heat
• 23/32nds OTD**
LH
R
* 7/7/3 Limited Casing Warranty: 700,000 miles, 7 years, or 3 retreads for XZA3 , XZA2 , XDA3 , and XDA Energy only. See limited warranty for details.
** OTD - Original tread depth
26
U
XZE 2 / XZE 2+
®
TM
LH
R
®
XZU / XZU 2
®
U
LH
®
• Solid shoulders to help
resist scrub
• Curb guards on
sidewalls
• Deep, wide tread
• Full depth siping for
efficient traction
• Compounds for scrub
resistance
• 22/32nds OTD**
LH
®
O/O
U
MICHELIN TRUCK TIRE REFERENCE CHART
DRIVE TIRES
®
®
• Ultra-fuel efficient with
unique Infini-Coil
technology
• Engineered to replace
duals on a 6x4 tractor
for long haul
• 24/32nds OTD**
™
LH
R
XDA-HT
O/O
U
R
XDY-2
R
™
LH
O/O
R
O/O
U
U
• High mileage, fuel
efficient, long haul
drive tire
• Available in all four
major sizes
• 7/7/3* casing limited
warranty
• 26/32nds OTD**
LH
R
O/O
U
• 28/32 deep tread
• Excellent traction for
high-torque applications
• Optimized for high
scrub applications
• Deep, 28/32nds OTD**
• Wide tread profile
designed for improved
mileage
• Large, stable, alternating
block design built for
handling and traction
while helping to
minimize noise
• 19.5" and 17.5" sizes
LH
R
O/O
®
U
LH
R
O/O
U
XDY-EX
• New tread compound
offers excellent protection against aggression,
chipping and scaling
• Groove bottom protectors help guard against
stone penetrations
• Massive open shoulder
design helps provide
maximized traction
• 31/32nds OTD**
• Extra aggressive design
• Shock pads at all belt
edges offer additional
long-term casing life
• Special compound to
help resist chipping
and scaling
• Extra deep 32/32nds
OTD**
LH
R
O/O
LH
R
• Ultra-fuel efficient
drive-axle tire designed
for long wear
• Available in LP 22.5"
• 7/7/3* casing limited
warranty
• 26/32nds OTD**
• Designed exclusively for
the 4x2 high torque
applications
• 30/32nds OTD** for
long wear
• Open shoulders
LH
R
O/O
U
®
LH
XDE M/S
R
O/O
®
O/O
U
U
TM
R
O/O
U
• Aggressive tread design
built for improved mud
traction
• Chip and cut resistant
compound
• Deep tread built for
protection and mileage
• Sidewall protection
• 30/32nds OTD**
LH
U
R
O/O
U
XDS
®
• All-weather highway
drive tire
• Patented Matrix sipes
deliver exceptional
traction and excellent
wear.
• 27/32nds OTD**
LH
O/O
®
• All-purpose drive tire
for regional/P&D
applications
• Open shoulder design
offers excellent
traction, especially in
loose soil and mud
• Versions feature
chip/cut resistant
compound
LH
R
XDE A/T
®
XDN 2/XDN 2 GRIP
™
U
XD4
®
XDY 3
®
XDA Energy
®
XDE 2/XDE 2+
™
U
™
XDHT
®
• Deep directional tread
optimized for traction
and mileage
• Chip and cut resistant
compound
• Excellent casing
protection
• Sidewall protection to
help minimize damage
LH
• Promotes long original
life while helping to
provide substantial
weight savings
• Infini-Coil technology ,
helps provide an
excellent ride and
vehicle stability
• Deep, 28/32nds OTD**
High Torque
O/O
XDA3
®
™
™
• High mileage tread
design
• Proprietary compound
specifically designed for
high HP, high scrub
applications
• 30/32nds OTD**
LH
X One
XDA-HT PLUS
Truck Tires
X One XDA
®
• High traction drive tire
optimized for severe
winter conditions.
• Patented zig zag sipes
• Extra casing protection
• Excellent wear
• 26/32nds OTD**
LH
R
O/O
U
* 7/7/3 Limited Casing Warranty: 700,000 miles, 7 years, or 3 retreads for XZA3 , XZA2 , XDA3 , and XDA Energy only. See limited warranty for details.
** OTD - Original tread depth
®
®
™
®
27
MICHELIN TRUCK TIRE REFERENCE CHART
TRAILER TIRES
X One XTA
X One XTE
• Ultra-fuel efficient with
unique Infini-Coil
technology
• Engineered to replace
duals in fuel and
weight sensitive long
haul trailer applications
• 13/32nds OTD**
• Trailer tire designed to
replace duals in high
scrub applications
• Helps deliver substantial
weight savings versus
comparable dual
assembly
• Unique Infini-Coil
technology belt
promotes excellent
vehicle stability
• Deep, 16⁄32nds OTD**
®
®
™
LH
R
O/O
XT-1
U
Truck Tires
R
O/O
™
LH
R
O/O
U
LH
U
U
• Long tread life from
scrub resistant compound
• Extra thick casing
protection from sidewall and curb guards
• Robust Michelin quality
casing
• 16/32nds OTD**
LH
R
O/O
U
• Optimized for low
platform trailer
application
• Solid shoulders help
resist lateral scrub
• Cut resistant compound
LH
R
LH
O/O
R
LH
U
®
Wide Base
O/O
U
™
LH
R
O/O
U
XDL
• Open tread design to
help resist stone
retention
• Cut and chip resistant
compound
• Reinforced belt package
for added retreadability
• Off-road drive tire
• Designed for excellent
mileage and protection
• Chip and cut resistant
compounding
• 12.00R24 size
• Restricted to 50 mph
• Deep 38/32nds OTD**
LH
R
O/O
U
LH
R
• Optimized for mobile
crane applications
• 50 mph speed rating
LH
R
XZY 3
O/O
U
®
Wide Base
• High traction and
floatation capability
• Excellent sidewall
protection
• Long, even tread wear
• Anti-chip compound
• All-wheel positions
®
U
R
XZA 4
®
• Rib design for quiet
ride
• Large shoulders help
provide resistance to
scrub
• Alternating groove wall
angles help minimize
stone retention
XZL
™
O/O
XTE2
XTY 2
®
* Exceeding the legal speed limit is neither recommended nor endorsed.
** OTD - Original tread depth
28
O/O
• Advanced Technology
compounding offers
excellent fuel economy
• Designed to help provide even wear and
cool running casing
• 17.5" and 19.5" sizes
• Optimized for low bed
trailer application
• 15" and 17.5" sizes
U
R
XTE
XTE2
O/O
• Ultra-fuel efficient long
haul trailer tire
• Available in LP 22.5"
• Designed for long,
smooth wear
• 13/32nds OTD**
XTA 2 Energy
®
R
®
™
XTA
LH
XTA Energy
®
®
• Decoupling groove for
resistance to irregular
wear
• Fuel efficient line haul
trailer tires
• 12/32nds OTD**
LH
®
SPECIAL APPLICATION TIRES
• Casing durability and
protection from
increased shoulder and
sidewall thickness
• Easier mounting/
demounting due to
rounded bead design
• Cut and scrub resistant
tread compound
LH
R
O/O
XZL
®
O/O
Wide Base
U
U
™
• All-terrain, all-position
radial for special service
• Open shoulder tread
design to help enhance
traction and floatation
capabilities on varied
terrains
• Non-directional design
LH
R
O/O
U
MICHELIN PRODUCT AVAILABILITY
A letter entry indicates the load range(s) in which Michelin markets a particular tread design and size. Tread Depth (32nds) is listed to the right of the load range(s).
LONG HAUL
XZA3 7
XZA2
XZ2
XZA2
XZA-1+
ENERGY
XZA-1B 6
XZA1
XRV
XDA3
XDA
XD2
ENERGY
XD4
XDN2
XDA-HT XDHT 6
XTA
XT-1
ENERGY
XTA2
XTA
ENERGY
7.50R15
H ⁄ 13
8.25R15
H ⁄ 14
10.00R15
J ⁄ 14
215/75R17.5
J ⁄ 15
235/75R17.5
J ⁄ 13
245/70R17.5
J ⁄ 13
225/70R19.5
F ⁄ 13
245/70R19.5
F ⁄ 14
265/70R19.5
J ⁄ 15
445/45R19.5
M ⁄ 18
11R22.5
GH ⁄ 19 7 G ⁄ 18
12R22.5
H ⁄ 19 1
G ⁄ 18
G ⁄ 26
GH ⁄ 27
G ⁄ 30
G ⁄ 28
G ⁄ 30
G ⁄ 28
G ⁄ 12
H ⁄ 27
235/80R22.5
G ⁄ 16
255/80R22.5
G ⁄ 17
H ⁄ 25 4
255/70R22.5
275/80R22.5
G ⁄ 30
GH ⁄
19 7
G ⁄ 18
G ⁄ 18
275/70R22.5
J ⁄ 18
295/60R22.5
J ⁄ 16
295/80R22.5
H ⁄ 16
G ⁄ 26
G ⁄ 26
G ⁄ 30
G ⁄ 27
G ⁄ 13
G ⁄ 12
J ⁄ 23 5,7
305/70R22.5
L ⁄ 16
315/80R22.5
L ⁄ 17
L 2 ⁄ 27
L ⁄ 18
L / 19 3
365/70R22.5
11R24.5
G⁄
19 7
G ⁄ 18
G ⁄ 18
G ⁄ 26
275/80R24.5
G ⁄ 19 7
G ⁄ 18
G ⁄ 18
G ⁄ 26
GH ⁄ 27 GH ⁄ 30
G ⁄ 27
G ⁄ 30
G ⁄ 28
G ⁄ 12
G ⁄ 28
G ⁄ 12
(1) XZ2 tread design.
(2) XDN 2 Grip tread design.
(3) XZA tread design.
(4) XD2 tread design.
(5) XDA2 + Energy tread design.
(6) May not be processed on North American Fleet Account delivery receipts.
(7) Directional tread design.
Truck Tires
®
®
®
®
®
A letter entry indicates the load range(s) in which Michelin markets a particular tread design and size. Tread Depth (32nds) is listed to the right of the load range(s).
ON / OFF ROAD and SPECIALTY
XZY
XZY-2
XZY 3
XTY2
445/65R19.5
XZY
XZY3
Wide Base Wide Base
XZL
XZA4
XZL
XDY-2 2
Wide Base
XDY 3
H ⁄ 30 2
H ⁄ 31
XDY-EX
XDL
L ⁄ 22
14.00R20
M ⁄ 18
395/85R20
G ⁄ 33
24R20.5
H ⁄ 21 1
24R21
H ⁄ 31
11R22.5
H ⁄ 23
12R22.5
GH ⁄ 24
H ⁄ 24
275/70R22.5
H ⁄ 30
H ⁄ 30
J ⁄ 21
315/80R22.5
L ⁄ 31 2
L ⁄ 23
385/65R22.5
J ⁄ 22
425/65R22.5
L ⁄ 23
L ⁄ 26
445/65R22.5
L ⁄ 23
L ⁄ 27
12.00R24
XDE
A/T
J ⁄ 23
11R24.5
12R24.5
(1) XS tread design.
(2) Directional tread design.
J ⁄ 38
H ⁄ 23
GH ⁄ 24
H ⁄ 24
H⁄
30 2
H ⁄ 31
H ⁄ 30
H ⁄ 32
H ⁄ 31
™
29
MICHELIN PRODUCT AVAILABILITY
A letter entry indicates the load range(s) in which Michelin markets a particular tread design and size. Tread Depth (32nds) is listed to the right of the load range(s).
REGIONAL
XZA ‡
G ⁄ 16
10R17.5
XZE
215/75R17.5
XZE2 / XZE2+
XDE2 / XDE2+ 4
G ⁄ 16
G ⁄ 19
XDE M/S
XDS 4
XTE 5
XTE2 / XTE2 WB
235/75R17.5
J ⁄ 15
8R19.5
F ⁄ 16
225/70R19.5
FG ⁄ 17
245/70R19.5
FH ⁄ 18
FG ⁄ 22
H ⁄ 22
17 2
265/70R19.5
G⁄
285/70R19.5
H ⁄ 18 2
305/70R19.5
G⁄
20 3,4
H ⁄ 21 3,4
J ⁄ 18
J ⁄ 18
9.00R20
G ⁄ 18
10.00R20
H ⁄ 18
11.00R20
H ⁄ 19
12.00R20
J ⁄ 20
365/80R20
L ⁄ 21
9R22.5
F ⁄ 18
F ⁄ 22
10R22.5
FG ⁄ 21
FG ⁄ 23
11R22.5
G ⁄ 22, H ⁄ 22 1
G ⁄ 26, H ⁄ 28 1
H ⁄ 26 4
12R22.5
H ⁄ 22 1
H ⁄ 28 1
H ⁄ 26 4
235/80R22.5
G ⁄ 19
G ⁄ 23
255/80R22.5
G ⁄ 20
G ⁄ 23
255/70R22.5
H ⁄ 18 1
275/80R22.5
GH ⁄ 22
G ⁄ 26
G ⁄ 16
G ⁄ 16
19 2
275/70R22.5
J⁄
295/80R22.5
H / 20 2
Truck Tires
385/65R22.5
L ⁄ 21
425/65R22.5
L ⁄ 21
445/65R22.5
L ⁄ 21
G ⁄ 22, H ⁄ 22 1
11R24.5
275/80R24.5
G ⁄ 26, H ⁄ 28 1
H ⁄ 26 4
G ⁄ 22
305/75R24.5
G ⁄ 16
G ⁄ 16
J / 22
(‡) XZA tread design has 3 different tread patterns.
(1) With cut and chip resistant tread compound for more aggressive environments.
(2) XZE 2+ tread design.
(3) XDE 2+ tread design.
(4) Directional tread design.
(5) May not be processed on North American Fleet Account delivery receipts.
®
®
®
A letter entry indicates the load range(s) in which Michelin markets a particular tread design and size. Tread Depth (32nds) is listed to the right of the load range(s).
X ONE
URBAN
XZU / XZU2
XZU 3
12R22.5
J ⁄ 24
445/50R22.5
275/70R22.5
J ⁄ 21
455/55R22.5
305/70R22.5
L ⁄ 22
305/75R24.5
(1) XZU tread design.
®
Urban
X ONE XDA-HT PLUS
X ONE XTA
X ONE XTE
X ONE XZUS
L ⁄ 24
L ⁄ 28
L ⁄ 13
L ⁄ 16
L ⁄ 28
L ⁄ 16 1
(1) With cut and chip resistant tread compound for more aggressive environments.
J ⁄ 26
315/80R22.5
30
Long Haul
H ⁄ 22 1
305/85R22.5
Regional
X ONE XDA
XZUS
11R22.5
L / 23
J ⁄ 22
M ⁄ 23
XZA3
®
The premium, ultra-fuel-efficient radial that delivers our
longest original tread life in long haul steer service
• Directional miniature sipes in the groove walls help defend against the onset of
irregular wear and contribute to long original tread life
• 19/32 of Michelin's latest Advanced Technology compound helps deliver exceptional
fuel efficiency and long tread life for more miles
• Enhanced shoulder rib is 80% wider than the XZA2 tire for improved shoulder wear
®
• Wide, flat tread optimizes footprint shape for improved handling and response in line
haul service
• 7 Year / 700,000 Mile / 3-Retread Limited Warranty (2)
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XZA3
Overall
Diameter
in.
mm.
®
Overall
Width
(‡)
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
73162
19
75
19.3
489
41.3 1048 11.1
283
8.25, 7.50
12.5
318
502
6175
105
2800
720
5840
105
2650
720
11R22.5 (1)
H
47488
19
75
19.1
485
41.3 1049 11.2
284
8.25, 7.50
12.5
318
503
6610
120
3000
830
6005
120
2725
830
275/80R22.5 (1)
G
73146
19
75
18.6
473
40.1 1018 10.9
277
8.25, 7.50
12.2
311
518
6175
110
2800
760
5675
110
2575
760
(1)
H
69192
19
75
18.7
474
40.1 1018 10.9
278
8.25, 7.50
12.2
311
518
7160
120
3250
830
6610
120
3000
830
G
73181
19
75
20.2
513
43.3 1099 11.1
282
8.25, 7.50
12.5
318
479
6610
105
3000
720
6005
105
2725
720
G
73173
19
75
19.3
491
41.3 1049 10.7
272
8.25, 7.50
12.2
311
501
6175
110
2800
760
5675
110
2575
760
11R24.5
275/80R24.5 (1)
lbs.
Max. Tire Load
Single
psi
kg.
G
(1)
mm.
Revs
per
Mile
11R22.5 (1)
275/80R22.5
in.
Min. Dual
Spacing
Approved
Rims
(‡)
kPa
(1) Directional tread design.
(2) 7/7/3 Limited Casing Warranty: 700,000 miles, 7 years, or 3 retreads for XZA3 , XZA2 , XDA3 , and XDA Energy only. See limited warranty for details.
®
®
™
®
(1)
(2)
XZA2 / XZ2
®
®
• Advanced Technology compounding helps reduce rolling
resistance promoting low fuel consumption in balance with
mileage, durability and casing endurance
• Over 7,000 trapezoidal micro sipes on groove edges help
break water surface tension to promote traction on wet and
slippery surfaces
• Patented shoulder groove design offers enhanced resistance
to uneven shoulder wear
• 7 Year / 700,000 Mile / 3-Retread Limited Warranty (5)
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
11R22.5 (1)
12R22.5 (3)
275/80R22.5
365/70R22.5
(1)
(2, 4)
Loaded
Radius
in.
mm.
XZA2 / XZ2
®
Overall
Diameter
in.
mm.
®
Overall
Width
in.
Min. Dual
Spacing
Approved
Rims
(‡)
(‡)
mm.
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
G
94030
18
75
19.2
487
41.2 1047 11.1
283
8.25, 7.50
12.5
318
504
6175
105
2800
720
5840
105
2650
720
kPa
H
73659
19
75
19.7
501
42.4 1078 11.2
285
8.25, 9.00
13.2
335
490
7390
120
3350
830
6780
120
3075
830
G
84597
18
75
18.6
472
40.0 1017 10.9
277 8.25, 7.50, 9.00
12.2
311
519
6175
110
2800
760
5675
110
2575
760
L
71842
19
75
19.6
497
42.5 1080 14.3
363
10.50
—
—
490 10500 125
4750
860
—
—
—
—
11R24.5 (1)
G
94476
18
75
20.2
513
43.3 1099 11.1
282
8.25, 7.50, -
12.5
318
479
6610
105
3000
720
6005
105
2725
720
275/80R24.5 (1)
G
78216
18
75
19.2
488
41.3 1048 10.6
270
8.25, 7.50, -
12.2
311
503
6175
110
2800
760
5675
110
2575
760
(1, 2) Tread design as indicated above the tire pictures.
(3) XZ2 tread design.
(4) XZA tread design.
(5) 7/7/3 Limited Casing Warranty: 700,000 miles, 7 years, or 3 retreads for XZA3 , XZA2 , XDA3 , and XDA Energy only. See limited warranty for details.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time
without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
Steer / All-position Tires
Truck Tires
The fuel-efficient all-position radial designed
for long life in over the road steer axle service
®
®
®
®
™
®
®
31
XZA2 Energy
®
(1)
(2)
The fuel-efficient all-position radial designed for
long life in highway steer axle service
• Unique intermediate rib design helps combat the onset of
irregular wear in highway service
• Exceptional handling and responsiveness through optimized
shoulder design
• Traction and lateral control offered by miniature sipes and
variable groove angles
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XZA2 Energy
®
Overall
Width
Overall
Diameter
in.
mm.
(‡)
Approved
Rims
Min. Dual
Spacing
(‡)
Revs
per
Mile
Max. Tire Load
Dual
psi
kg.
in.
mm.
in.
mm.
kPa
lbs.
275/70R22.5 (1)
J
90059
18
75
17.6
448
38.0
966
10.9
277
7.50, 8.25
11.9
303
545
6940
130
3150
900
6395
120
2900
830
295/60R22.5 (1)
J
33215
16
65
16.7
424
36.1
918
11.4
290
9.00
13.0
329
575
7390
130
3350
900
6780
130
3075
900
295/80R22.5 (2)
H
76807
16
75
19.1
486
41.3 1048 11.8
299
9.00, 8.25
13.2
335
503
7830
120
3550
830
6940
120
3150
830
13.8
351
492
9090
130
4125
900
8270
130
3750
900
Max. Tire Load
Dual
lbs.
psi
kg.
kPa
315/80R22.5
(1)
L
76184
17
75
19.5
496
42.3 1074 12.5
318
9.00,
8.25 (3)
lbs.
Max. Tire Load
Single
psi
kg.
kPa
(1, 2) Tread design as indicated above the tire pictures.
(3) For use with 8.25x22.5 wheels, see Page 87.
XZA -1+ / XZA -1B
®
®
The all-position radial optimized for steer axles in
highway and limited regional service
Truck Tires
• The "original" shoulder decoupling groove helps resist irregular wear in
slow wear rate applications
• Miniature groove wall sipes help inhibit the onset of irregular wear while
helping to improve traction on wet surfaces
Steer / All-position Tires
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
®
Overall
Diameter
in.
mm.
®
Overall
Width
(‡)
in.
Approved
Rims
mm.
Min. Dual
Spacing
(‡)
in.
mm.
12.5
318
Revs
per
Mile
Max. Tire Load
Single
lbs.
psi
kg.
kPa
XZA-1+
11R22.5
G
06032
18
75
19.3
489
41.3 1049 11.1
281
8.25, 7.50
501
6175
105
2800
720
5840
105
2650
720
275/80R22.5
G
18678
18
75
18.7
474
40.1 1019 10.9
276
8.25, 7.50
12.2
311
516
6175
110
2800
760
5675
110
2575
760
11R24.5
G
10274
18
75
20.2
513
43.3 1099 11.1
282
8.25, 7.50
12.5
318
479
6610
105
3000
720
6005
105
2725
720
275/80R24.5
G
30968
18
75
19.3
489
41.3 1049 10.7
271
8.25, 7.50
12.2
311
501
6175
110
2800
760
5675
110
2575
760
XZA-1B
May not be processed on North American Fleet Accounts delivery receipts.
11R22.5
G
93834
18
75
19.3
489
41.3 1049 11.1
281
8.25, 7.50
12.5
318
501
6175
105
2800
720
5840
105
2650
720
275/80R22.5
G
90907
18
75
18.7
474
40.1 1019 10.9
276
8.25, 7.50
12.2
311
516
6175
110
2800
760
5675
110
2575
760
11R24.5
G
49235
18
75
20.2
513
43.3 1099 11.1
282
8.25, 7.50
12.5
318
479
6610
105
3000
720
6005
105
2725
720
275/80R24.5
G
89975
18
75
19.3
489
41.3 1049 10.7
271
8.25, 7.50
12.2
311
501
6175
110
2800
760
5675
110
2575
760
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time
without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
32
Loaded
Radius
in.
mm.
XZA -1+ / XZA -1B
XZA 1
®
The even-wearing all-position tire optimized for heavy axle
loads in highway & limited regional service
• Miniature sipes in groove walls and variable groove angles help reduce irregular
wear and improve overall performance
• Full-width elastic protector ply helps protect the working plies from bruising and
penetrations
• Flat crown radius helps enhance wear and treadlife
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
315/80R22.5
L
47056
18
75
Loaded
Radius
in.
mm.
19.6
499
XZA 1
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
in.
Approved
Rims
mm.
42.5 1079 12.5
317
9.00, 8.25 (1)
Min. Dual
Spacing
(‡)
in.
mm.
13.8
351
Revs
per
Mile
lbs.
489
9090
Max. Tire Load
Single
psi
kg.
130
4125
kPa
lbs.
900
8270
Max. Tire Load
Dual
psi
kg.
130
3750
kPa
900
(1) For use with 8.25x22.5 wheels, see Page 87.
XZE
®
The premium all-position radial with extra-wide, extra-deep tread
designed to help deliver our best wear in high scrub applications
• Beefy, buttressed shoulders help resist tearing and accelerated wear in high scrub
applications
• Extra strong curb guards help protect sidewalls against most impacts and abrasions
for long casing life
• Groove bottom protectors help deliver additional defense against stone drilling
• Application specific high scrub compound for chip and cut resistance in LRH versions
with designation make the XZE tire our longest wearing regional steer tire
• Deep, wide tread and optimized footprint shape help deliver long, even treadwear
®
Size
Loaded
Radius
in.
mm.
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
Approved
Rims
Min. Dual
Spacing
(‡)
Revs
per
Mile
Max. Tire Load
Dual
psi
kg.
in.
mm.
in.
mm.
kPa
lbs.
225/70R19. 5
F
81473
17
75
14.9
378
32.2
819
8.9
227
6.00, 6.75
9.7
246
646
3640
95
1650
660
3415
95
1550
660
225/70R19.5
G
91043
17
75
14.9
378
32.2
819
8.9
227
6.00, 6.75
9.7
246
646
3970
110
1800
760
3750
110
1700
760
245/70R19.5
F
63523
18
75
15.6
395
33.6
853
9.7
247
6.75, 7.50
10.7
272
619
4080
95
1850
660
3860
95
1750
660
245/70R19.5
H
75997
18
75
15.6
396
33.6
853
9.7
247
6.75, 7.50
10.7
272
619
4940
120
2240
830
4675
120
2120
830
9R22.5
F
75473
18
75
17.8
452
38.2
970
8.9
226 6.00, 6.75, 7.50 10.0
254
543
4540
105
2060
720
4300
105
1950
720
10R22.5
F
79883
21
75
18.7
475
40.1 1019 10.2
259
6.75, 7.50
11.1
282
517
5205
100
2360
690
4940
100
2240
690
10R22.5
G
99141
21
75
18.7
475
40.1 1019 10.2
259
6.75, 7.50
11.1
282
517
5675
115
2575
790
5355
115
2430
790
11R22.5
G
62165
22
75
19.2
488
41.3 1050 11.2
285
8.25, 7.50
12.5
318
502
6175
105
2800
720
5840
105
2650
720
11R22.5 H
95283
22
75
19.2
488
41.4 1051 11.3
286
8.25, 7.50
12.5
318
501
6610
120
3000
830
6005
120
2725
830
12R22.5 H
85335
22
75
19.8
503
42.6 1082 11.4
290
8.25, 9.00
13.2
335
486
7390
120
3350
830
6780
120
3075
830
235/80R22.5
G
68749
19
75
17.4
443
37.4
949
9.3
236
6.75, 7.50
10.3
262
555
4675
110
2120
760
4410
110
2000
760
255/80R22.5
G
94390
20
75
17.9
455
38.5
979
10.0
254
7.50, 8.25
11.3
287
538
5205
110
2360
760
4805
110
2180
760
275/80R22.5
G
73348
22
75
18.6
473
40.2 1021 11.1
282
8.25, 7.50
12.2
311
517
6175
110
2800
760
5675
110
2575
760
275/80R22.5
H
01637
22
75
18.7
475
40.2 1022 11.1
282
8.25, 7.50
12.2
311
516
7160
120
3250
830
6610
120
3000
830
255/70R22.5 H
61737
18
75
17.2
437
36.7
10.2
260
8.25, 7.50
11.6
295
563
5510
120
2500
830
5070
120
2300
830
11R24.5
G
93749
22
75
20.3
516
43.5 1104 11.1
281
8.25, 7.50
12.5
318
476
6610
105
3000
720
6005
105
2725
720
11R24.5 H
65618
22
75
20.3
516
43.5 1104 11.1
281
8.25, 7.50
12.5
318
478
7160
120
3250
830
6610
120
3000
830
275/80R24.5
G
57425
22
75
19.3
490
41.3 1050 10.8
274
8.25, 7.50
12.2
311
502
6175
110
2800
760
5675
110
2575
760
932
lbs.
Max. Tire Load
Single
psi
kg.
kPa
Truck Tires
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
XZE
Steer / All-position Tires
Specifications for Tread Design:
With chip and cut resistant tread compound.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time
without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
33
(1)
XZE 2 / XZE 2+
®
®
(2)
The all-position radial optimized for steer axles
in regional and limited highway service
• Buttressed shoulder helps resist wear in high scrub applications
• Full depth sipes offer enhanced traction throughout the usable
tire life
• Full-width protector ply helps protect the working plies from
bruises and penetrations
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XZE 2 / XZE 2+
®
®
Overall
Width
Overall
Diameter
in.
mm.
(‡)
in.
mm.
8.5
217
Approved
Rims
Min. Dual
Spacing
(‡)
Revs
per
Mile
Max. Tire Load
Single
lbs.
psi
kg.
kPa
Max. Tire Load
Dual
lbs.
psi
kg.
in.
mm.
kPa
9.4
239
684
3750
100
1700
690
3525
100
1600
690
XZE2
215/75R17.5 (4)
G
19502
16
75
14.1
357
30.5
9.00R20 (1, 3)
774
6.00, 6.75
G
06131
18
65
18.7
474
40.0 1017 10.0
253 7.00, 6.00, 6.50 11.6
295
517
5510
105
2500
720
5070
105
2300
720
10.00R20
(1, 3)
H
01889
18
65
19.2
488
41.3 1049 11.1
281
7.5, 6.5, 7.0
318
503
6780
115
3075
790
6005
115
2725
790
11.00R20
(1, 3)
H
77021
19
65
19.8
502
42.4 1077 11.7
297
8.0, 7.5, 8.5
13.2
335
489
7390
120
3350
830
6780
120
3075
830
12.00R20 (1, 3)
J
23014
20
65
20.5
520
44.0 1117 12.4
315
8.50
14.1
358
472
8270
120
3750
830
7610
120
3450
830
305/75R24.5 (2)
J
67251
22
65
19.8
504
42.7 1084 11.6
294
8.25
13.1
334
486
8270
120
3750
830
7160
120
3250
830
265/70R19.5 (1)
G
46194
17
75
15.8
402
34.3
870
10.4
263 7.50, 6.75, 8.25 11.6
295
607
5510
110
2500
760
5205
110
2360
760
285/70R19.5 (1)
H
68419
18
75
16.2
412
35.2
895
11.1
283 7.50, 8.25, 9.00 12.2
311
592
6395
120
2900
830
6005
120
2725
830
275/70R22.5 (1)
J
78395
19
75
17.6
448
38.0
966
10.9
276
7.50, 8.25
11.9
303
545
6940
130
3150
900
6395
120
2900
830
295/80R22.5 (1)
H
81993
20
75
19.3
489
41.5 1055 11.7
298
8.25, 9.00
12.8
326
500
7830
120
3550
830
6940
120
3150
830
12.5
XZE2+
Truck Tires
(1, 2) Tread design as indicated above the tire pictures.
(3) For tube and flap information see Page 80 - 81.
(4) Tread design not shown.
(1)
XZA
®
(2)
Steer / All-position Tires
The all-position radial with proven versatility
• Massive shoulders and application specific compound help resist
scrub and abrasion, promoting extended tread life.
• Zig-zag groove design for true all-position use.
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XZA
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
in.
mm.
9.5
241
10R17.5 (1)
G
05008
16
65
15.6
397
33.9
861
8R19.5 (1)
F
60893
16
75
15.6
395
33.6
854
8.1
206
305/70R19.5 (2)
J
50505
18
75
16.7
424
36.3
922
11.8
300
Approved
Rims
Min. Dual
Spacing
(‡)
Revs
per
Mile
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
11.1
282
615
4805
115
2180
790
4540
115
2060
790
5.25, 6.00
8.8
224
616
3525
110
1600
760
3305
110
1500
760
8.25, 9.00
13.1
334
575
6940
120
3150
830
6395
120
2900
830
6.75, 7.50
lbs.
Max. Tire Load
Single
psi
kg.
kPa
(1, 2) Tread design as indicated above the tire pictures.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
34
XZY
®
The all-position radial for on / off road service
• Offset block shoulder design promotes soft soil mobility
• Application specific compound to help resist aggressions from chipping and cutting
• Zig-zag groove angles help resist stone retention and drilling
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
12.00R24 (1)
J
05256
23
65
Loaded
Radius
in.
mm.
22.4
568
XZY
®
Overall
Width
Overall
Diameter
in.
mm.
(‡)
in.
Approved
Rims
mm.
48.1 1222 12.3
313
8.50, 7.50
Min. Dual
Spacing
(‡)
in.
mm.
13.9
354
Revs
per
Mile
431
Max. Tire Load
Single
lbs.
psi
kg.
9370
120
4250
kPa
830
Max. Tire Load
Dual
lbs.
psi
kg.
8540
120
3875
kPa
830
(1) For tube and flap information see Page 80 - 81.
XZY 3
®
The premium all-position radial designed for exceptional
wear and traction in mixed on / off road service
(1)
(2)
• 24/32 of application specific compound featuring Michelin Co-Ex
technology promotes maximized resistance against aggressions, long
treadlife and enhanced casing life
• Maximized soft soil and mud traction throughout the tire life as
ribs and shoulder edges retain their aggressive notches
• Protectors in all grooves help provide optimized defense against
stone drilling
• Extra thick sidewalls with protector ribs help resist damages from
most shocks and impacts
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XZY 3
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
in.
Approved
Rims
mm.
Min. Dual
Spacing
(‡)
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
11R22.5 (1)
G
84455
24
65
19.6
498
41.8 1061 11.3
288
8.25, 7.50
12.5
318
496
6175
105
2800
720
5840
105
2650
720
kPa
11R22.5 (1)
H
80927
24
65
19.6
498
41.8 1061 11.3
288
8.25, 7.50
12.5
318
496
6610
120
3000
830
6005
120
2725
830
12R22.5 (1)
H
47947
24
65
20.1
509
42.9 1089 11.4
290
8.25, 9.00
13.2
335
483
7390
120
3350
830
6780
120
3075
830
315/80R22.5 (2,4)
L
40200
23
65
19.8
502
42.9 1089 12.5
318
9.00, 8.25
13.8
351
486
9090
130
4125
900
8270
130
3750
900
11R24.5
(1)
G
47945
24
65
20.5
520
43.7 1110 11.3
288
8.25, 7.50
12.5
318
473
6610
105
3000
720
6005
105
2725
720
11R24.5
(1)
H
79250
24
65
20.5
520
43.7 1111 11.4
289
8.25, 7.50
12.5
318
473
7160
120
3250
830
6610
120
3000
830
12R24.5 (2)
H
47951
24
65
21.0
533
44.9 1140 11.5
291
8.25, 9.00
13.2
335
461
7830
120
3550
830
7160
120
3250
830
Steer / All-position Tires
Truck Tires
• +11% increase in tread volume for increased durability
and mileage (3)
+ 5% in tread width (3)
+ 4% in tread depth (3)
(1, 2) Tread design as indicated above the tire pictures.
(3) When compared to Michelin XZY-2 ; tire.
(4) For use with 8.25x22.5 wheels, see Page 87.
®
™
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
35
XZY-2
™
The all-position radial for on / off road service
• Square solid shoulders to help improve resistance to scrub
• 23/32 of application specific compound to promote resistance to aggressions
and long tread life
• Robust four-belt crown package with extra wide working plies help deliver
exceptional casing life
• Center groove protection helps defend against stone drilling
• Extra thick sidewalls with protector ribs help resist damages from most shocks
and impacts
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
XZY-2
™
Loaded
Radius
in.
mm.
Overall
Diameter
in.
mm.
Overall
Width
(‡)
in.
Min. Dual
Spacing
Approved
Rims
(‡)
mm.
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
11R22.5
H
97624
23
65
19.5
496
41.7 1058 11.0
279
8.25, 7.50
12.5
318
497
6610
120
3000
830
6005
120
2725
830
kPa
11R24.5
H
47396
23
65
20.4
519
43.7 1109 11.0
279
8.25, 7.50
12.5
318
474
7160
120
3250
830
6610
120
3000
830
X One XZU S
®
®
Truck Tires
The latest Michelin all-position radial innovation designed
for optimized weight savings and significant fuel savings
in urban regional operations
• Long tread life and outstanding scrub resistance in Urban / Regional service
with 23/32nd OTD** of application specific compound
• Outstanding traction and wear through Michelin’s patented Infini-Coil
technology helping to provide a flat, stable contact area
™
Steer / All-position Tires
• Enhanced protection against stone drilling from variable pitch groove walls
and groove bottom protectors in all grooves
• Great bead durability and resistance to heat from reinforced bead package
featuring a wide metallic chafer
Specifications for Tread Design:
Size
455/55R22.5
Load
Range
Catalog
Number
Tread
Depth
32nds
M
28513
23
Max
Speed
X One XZU S
®
Loaded Radius
®
Overall Diameter
Overall Width
(*)
(‡)
mph
in.
mm.
in.
mm.
in.
mm.
75
19.5
496
42.2
1071
17.7
450
Approved
Rims
Revs
per
Mile
14.00 (1)
493
lbs.
11700
Max. Tire Load
Single
psi
kg.
kPa
130
900
5300
** OTD - Original tread depth.
(1) For use with 13.00x22.5 wheels. see Page 87.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
36
XZU S
®
The premium all-position radial with high carrying capacity
designed for exception treadlife in high scrub urban applications
such as waste vehicles
• Significant increase in treadlife from tread volume, and application specific compounds
for scrub resistance (1)
• 65 mph rating with Michelin Co-Ex technology, promoting optimized scrub resistance
and reduced operating temperatures in the crown area
• Bead design changes help resistance to high brake temperatures common in urban
stop / start service
• Fostered reduced mounting and dismounting damage with Michelin's rounded
bead toe design
• Outstanding traction on wet surfaces with wider tread contact area and new compounds
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
315/80R22.5
L
90902
23
65
XZU S
®
Loaded
Radius
in.
mm.
19.8
Overall
Width
Overall
Diameter
in.
mm.
502
(‡)
in.
Approved
Rims
mm.
42.9 1089 12.5
318
9.00, 8.25 (2)
Min. Dual
Spacing
(‡)
in.
mm.
13.8
351
Revs
per
Mile
Max. Tire Load
Single
lbs.
psi
kg.
486 10000 130
4535
kPa
900
Max. Tire Load
Dual
lbs.
psi
kg.
8270
130
3750
kPa
900
(1) When compared to the 315/80R22.5 Michelin XZY-2S .
(2) For use with 8.25x22.5 wheels, see Page 87.
®
™
(1)
XZU / XZU 2
®
(2)
®
Truck Tires
The all-position radial optimized for high scrub
urban applications with frequent stops, such as
transit buses, delivery and waste vehicles
• Application specific compounds designed to resist the scrub and
abrasion of most urban applications
• Extra sidewall thickness with scrub indicators help protect
against most curb damage and promote timely casing rotation
• Thick undertread with regrooving depth indicators facilitates
efficient regrooving for extended treadlife
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XZU / XZU 2
®
Overall
Diameter
in.
mm.
®
Overall
Width
(‡)
in.
Approved
Rims
mm.
Min. Dual
Spacing
(‡)
in.
mm.
12.2
310
Revs
per
Mile
Max. Tire Load
Single
lbs.
psi
kg.
kPa
Max. Tire Load
Dual
lbs.
psi
kg.
kPa
11R22.5 (1)
H
95752
22
62
19.4
494
41.7 1059 10.8
12R22.5 (2)
J
43714
24
62
19.9
506
42.9 1089 11.4
289
8.25, 9.00
13.2
335
485
7830
120
3550
830
6940
120
3150
830
275/70R22.5 (2)
J
57317
21
62
17.7
449
38.1
11.0
280
7.50, 8.25
11.9
303
545
6940
130
3150
900
6395
120
2900
830
305/70R22.5 (2)
L
95623
22
65
18.3
465
39.4 1001 11.9
303
8.25, 9.00
13.5
343
526
7830
120
3550
830
6940
120
3150
830
968
275
7.50, 8.25
497
6940
120
3150
830
6395
120
2900
Steer / All-position Tires
• Wide, deep circumferential grooves and full depth sipes
promote excellent traction throughout tire life
830
(1) XZU tread design.
(2) XZU 2 tread design.
®
®
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
37
XZU 3
(1)
®
(2)
The all-wheel-position radial for for urban
operations involving frequent stopping and
starting
• Improved tread life from new, application specific compounds
• Outstanding scrub resistance from large, solid shoulder
• Improved(3) traction on wet and slippery surfaces through
Michelin's patented Matrix™ siping technology
• Extended retreadability with extra-robust casing design and
special, elongated metallic chaffer in bead
• Resistance to curbing and impacts through reinforced sidewall
as compared to highway/regional tires
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XZU 3
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
in.
Approved
Rims
mm.
Min. Dual
Spacing
(‡)
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
305/85R22.5 (1)
J
56332
26
65
20.0
508
43.0 1093 11.6
294
8.25, 9.00
13.2
335
482
7830
120
3550
830
7160
120
3250
830
kPa
305/75R24.5 (2)
J
60143
22
65
19.9
504
42.7 1084 11.6
294
8.25
13.1
334
486
8270
120
3750
830
7160
120
3250
830
(1, 2) Tread design as indicated above the tire pictures.
(3) When compared to Michelin XZU 2 tire.
®
®
Truck Tires
Steer / All-position Tires
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
38
X One XDA
®
®
The latest Michelin drive axle innovation that helps
deliver optimized fuel efficiency and significant weight
savings in long haul operations (1)
• Engineered to replace duals
• Innovative belt design and Advanced Technology compounds combine to
help deliver fuel-efficient, long tread life
• Features Michelin's patented Infini-Coil technology , incorporating a
1/4 mile of continuous steel cable to help eliminate casing growth
™
Specifications for Tread Design:
Size
445/50R22.5
Load
Range
Catalog
Number
Tread
Depth
32nds
L
90348
24
Max
Speed
X One XDA
®
Loaded Radius
®
Overall Diameter
Overall Width
(*)
(‡)
mph
in.
mm.
in.
mm.
in.
mm.
75
18.5
471
40.2
1021
17.1
435
Approved
Rims
Revs
per
Mile
14.00
518
lbs.
10200
Max. Tire Load
Single
psi
kg.
kPa
120
830
4625
(1) Comparison based on rolling resistance of Michelin XDA3 on all drive positions vs. Michelin X One XDA on all drive positions.
®
™
®
X One XDA-HT
®
™
®
®
PLUS
The latest Michelin drive axle innovation designed for
optimized weight savings in long haul and regional
operations (1)
Truck Tires
®
• Engineered to replace duals
• Weight savings of approximately 425 lb. per tractor
(1)
• Deep 26/32 tread depth offers long original tread life and excellent
all weather traction
• Features Michelin's patented Infini-Coil technology , incorporating
1/4 mile of continuous steel cable to help eliminate casing growth
Specifications for Tread Design:
Max
Speed
X One XDA-HT
®
Overall Diameter
PLUS
Approved
Rims
Revs
per
Mile
435
14.00
514
448
14.00
493
Load
Range
Catalog
Number
Tread
Depth
32nds
mph
in.
mm.
in.
mm.
in.
mm.
445/50R22.5
L
38873
28
75
18.7
475
40.5
1028
17.1
455/55R22.5
L
10239
28
75
19.6
498
42.5
1078
17.6
Size
Loaded Radius
™
Overall Width
(*)
Drive Tires
™
(‡)
Max. Tire Load
Single
psi
kg.
kPa
10200
120
4625
830
11000
125
5000
860
lbs.
(1) Comparison based on tractor equipped with 275/80R22.5 Michelin XDA-HT mounted in dual assembly on 8.25x22.5 inch aluminum wheels.
®
™
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
39
XDA Energy /
XDA2 + Energy
(1)
®
(2)
®
The most fuel-efficient, quietest standard drive tire
• Latest Advanced Technology tread compounds for outstanding
fuel efficiency
• Alternating groove wall angles help resist stone retention
and improve traction throughout the life of the tire
• Wide circumferential grooves quickly evacuate water
• 7 Year / 700,000 Mile / 3-Retread Limited Warranty (4)
Specifications for Tread Design:
XDA Energy / XDA2 + Energy
®
®
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
Overall
Diameter
in.
mm.
Overall
Width
(‡)
mm.
Revs
per
Mile
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
G
42564
26
75
18.8
478
40.5 1028 10.9
278
8.25, 7.50
12.2
311
513
6175
110
2800
760
5675
110
2575
760
295/60R22.5 (2, 3)
J
97550
23
65
16.9
429
36.5
289
9.00
13.0
329
569
7390
130
3350
900
6780
130
3075
900
11.4
lbs.
Max. Tire Load
Single
psi
kg.
275/80R22.5 (1)
928
in.
Min. Dual
Spacing
Approved
Rims
(‡)
kPa
(1, 2) Tread design as indicated above the tire pictures.
(3) Directional tread design.
(4) 7/7/3 Limited Casing Warranty: 700,000 miles, 7 years, or 3 retreads for XZA3 , XZA2 , XDA3 , and XDA Energy only. See limited warranty for details.
®
®
™
®
XDA3 / XD2
™
®
The newest, fuel-efficient, standard drive tire that helps deliver
long, even tread wear and a smooth quiet ride
Truck Tires
• Our newest compound formulation combines low rolling resistance with long original
treadlife
• Alternating groove wall angles help resist stone retention and improve traction
throughout the life of the tire
• Wide circumferential grooves quickly evacuate water
• 7 Year / 700,000 Mile / 3-Retread Limited Warranty (2)
Drive Tires
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XDA3 / XD2
™
Overall
Diameter
in.
mm.
Overall
Width
Min. Dual
Spacing
Approved
Rims
(‡)
(‡)
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
96666
26
75
19.5
496
41.9 1063 11.1
283
8.25, 7.50
12.5
318
495
6175
105
2800
720
5840
105
2650
720
255/70R22.5 (1)
H
74493
25
75
17.4
442
37.2
10.2
258
8.25, 7.50
11.6
295
558
5510
120
2500
830
5070
120
2300
830
275/80R22.5
G
73095
26
75
18.8
478
40.5 1028 10.9
278
8.25, 7.50
12.2
311
513
6175
110
2800
760
5675
110
2575
760
11R24.5
G
71551
26
75
20.5
521
43.8 1113 11.1
283
8.25, 7.50
12.5
318
473
6610
105
3000
720
6005
105
2725
720
275/80R24.5
G
68934
26
75
19.5
496
41.9 1063 10.7
271
8.25, 7.50
12.2
311
495
6175
110
2800
760
5675
110
2575
760
944
mm.
Revs
per
Mile
G
11R22.5
in.
®
kPa
(1) XD2 tread design.
(2) 7/7/3 Limited Casing Warranty: 700,000 miles, 7 years, or 3 retreads for XZA3 , XZA2 , XDA3 , and XDA Energy only. See limited warranty for details.
®
®
™
®
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
40
XD4
®
The high-torque drive axle radial engineered exclusively for
4 x 2 highway service
• Open lug and shoulder design helps provide biting lateral edges for adverse
weather conditions
• 30/32nds OTD** and open shoulder design help deliver long tread life and
excellent year round traction
• Wide footprint and square shoulders help improve stability and increase mileage
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XD4
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
in.
Approved
Rims
Min. Dual
Spacing
(‡)
mm.
Revs
per
Mile
Max. Tire Load
Single
lbs.
psi
kg.
kPa
Max. Tire Load
Dual
lbs.
psi
kg.
in.
mm.
11R22.5
G
87033
30
75
19.5
495
42.0 1066 11.2
284
8.25, 7.50
12.5
318
495
6175
105
2800
720
5840
105
2650
720
kPa
275/80R22.5
G
82292
30
75
19.0
482
40.8 1036 10.9
278
8.25, 7.50
12.2
311
509
6175
110
2800
760
5675
110
2575
760
** OTD - Original tread depth.
XDA-HT
™
High Torque
Truck Tires
The 30/32 high-mileage drive tire engineered for high torque
6 x 4 service
• Michelin Co-Ex technology helps ensure high removal mileages with excellent
retreadability
• Open lug design helps provide biting lateral edges for adverse weather conditions
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
11R22.5
G
93430
30
75
Loaded
Radius
in.
mm.
19.5
495
XDA-HT
Overall
Diameter
in.
mm.
™
Overall
Width
(‡)
in.
42.0 1067 11.2
High Torque
Approved
Rims
mm.
284
Drive Tires
• Wide footprint and square, beefy shoulders help improve stability and increase
mileage
8.25, 7.50
Min. Dual
Spacing
(‡)
in.
mm.
12.5
318
Revs
per
Mile
495
Max. Tire Load
Single
lbs.
psi
kg.
6175
105
2800
kPa
720
Max. Tire Load
Dual
lbs.
psi
kg.
5840
105
2650
kPa
720
275/80R22.5
G
50575
30
75
19.0
483
40.8 1036 10.9
278
8.25, 7.50
12.2
311
509
6175
110
2800
760
5675
110
2575
760
11R24.5
G
81937
30
75
20.6
523
43.8 1113 11.2
285
8.25, 7.50
12.5
318
471
6610
105
3000
720
6005
105
2725
720
11R24.5
H
59777
30
75
20.6
523
43.8 1113 11.2
285
8.25, 7.50
12.5
318
471
7160
120
3250
830
6610
120
3000
830
275/80R24.5
G
55519
30
75
19.5
495
42.0 1066 10.7
272
8.25, 7.50
12.2
311
495
6175
110
2800
760
5675
110
2575
760
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
41
XDHT
®
The drive axle radial combining long mileage with all-season
traction for highway and regional applications
• Transverse sipes help provide the traction needed to keep trucks moving in adverse
weather conditions
• 28/32 tread depth helps resist scrub
• Flat, wide tread radius helps provide a wide contact patch to extend tread life
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XDHT
®
Overall
Width
Overall
Diameter
in.
mm.
(‡)
in.
Approved
Rims
mm.
Min. Dual
Spacing
(‡)
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
11R22.5
G
37895
28
75
19.5
495
41.9 1063 11.1
283
8.25, 7.50
12.5
318
496
6175
105
2800
720
5840
105
2650
720
kPa
275/80R22.5
G
33236
28
75
18.9
480
40.7 1034 10.9
278
8.25, 7.50
12.2
311
510
6175
110
2800
760
5675
110
2575
760
11R24.5
G
37556
28
75
20.5
521
43.9 1114 11.1
283
8.25, 7.50
12.5
318
472
6610
105
3000
720
6005
105
2725
720
275/80R24.5
G
13196
28
75
19.5
495
41.9 1063 10.7
271
8.25, 7.50
12.2
311
496
6175
110
2800
760
5675
110
2575
760
May not be processed on North American Fleet Account delivery receipts.
XDE 2 / XDE 2+
®
(1)
®
(2)
The open shoulder drive axle radial designed
for regional / highway service
Truck Tires
• Bridged center block design helps improve tread stability
• High density lateral grooves help provide excellent traction in
all weather conditions
• XDE 2+ directional tread design helps provide good traction
and long treadlife
®
Drive Tires
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XDE 2 / XDE 2+
®
Overall
Diameter
in.
mm.
®
Overall
Width
(‡)
Approved
Rims
Min. Dual
Spacing
(‡)
Revs
per
Mile
Max. Tire Load
Dual
psi
kg.
in.
mm.
in.
mm.
kPa
lbs.
215/75R17.5 (1)
G
38457
19
75
14.2
360
30.6
778
8.5
216
9.6
245
679
3750
100
1700
690
3525
100
1600
690
265/70R19.5 (2)
G
95319
20
75
15.9
404
34.4
875
10.3
262 7.50, 6.75, 8.25 11.6
295
605
5510
110
2500
760
5205
110
2360
760
(2)
H
79456
21
75
16.3
414
35.4
899
10.8
274 7.50, 8.25, 9.00 12.2
311
587
6395
120
2900
830
6005
120
2725
830
285/70R19.5
6.00, 6.75
lbs.
Max. Tire Load
Single
psi
kg.
kPa
(1) XDE 2 tread design (non-directional).
(2) XDE 2+ tread design (directional).
®
®
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
42
XDE M/S
®
The open shoulder drive axle radial engineered for excellent
mileage and traction across a wide range of applications
• Aggressive open shoulder design with deep tapered lateral grooves help provide
outstanding year round traction and excellent water and mud dispersion
• Application specific compounds help resist the effects of scrubbing in standard LRF/LRG
sizes. LRH sizes with a designation feature for chip and cut resistant compound.
• Full depth sipes help provide additional traction on wet and slippery surfaces in
LRF / LRG sizes
• Offset shoulder blocks for excellent traction in mud and soft soil conditions
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XDE M/S
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
Approved
Rims
Min. Dual
Spacing
(‡)
Revs
per
Mile
Max. Tire Load
Single
lbs.
psi
kg.
kPa
Max. Tire Load
Dual
lbs.
psi
kg.
in.
mm.
in.
mm.
225/70R19.5
F
70421
22
75
15.0
381
32.6
828
8.7
221
6.00, 6.75
9.7
246
639
3640
95
1650
660
3415
95
1550
660
kPa
225/70R19.5
G
58903
22
75
15.0
381
32.6
828
8.7
221
6.00, 6.75
9.7
246
639
3970
110
1800
760
3750
110
1700
760
245/70R19.5
H
62204
22
75
15.7
398
33.8
858
9.8
248
6.75, 7.50
10.7
272
614
4940
120
2240
830
4675
120
2120
830
9R22.5
F
92230
22
75
17.9
456
38.4
977
8.9
226 6.00, 6.75, 7.50 10.0
254
539
4540
105
2060
720
4300
105
1950
720
10R22.5
F
87904
23
75
18.8
477
40.2 1022 10.2
259
6.75, 7.50
11.1
282
515
5205
100
2360
690
4940
100
2240
690
10R22.5
G
87357
23
75
18.8
477
40.2 1022 10.2
259
6.75, 7.50
11.1
282
515
5675
115
2575
790
5355
115
2430
790
11R22.5
G
73493
26
75
19.4
492
41.6 1057 11.2
285
8.25, 7.50
12.5
318
498
6175
105
2800
720
5840
105
2650
720
11R22.5 H
73927
28
75
19.4
493
41.7 1060 11.2
285
8.25, 7.50
12.5
318
497
6610
120
3000
830
6005
120
2725
830
12R22.5 H
94806
28
75
20.0
509
43.0 1092 11.4
290
8.25, 9.00
13.2
335
481
7390
120
3350
830
6780
120
3075
830
235/80R22.5
G
62848
23
75
17.6
446
37.6
956
9.3
236
6.75, 7.50
10.3
262
551
4675
110
2120
760
4410
110
2000
760
255/80R22.5
G
74299
23
75
18.0
457
38.7
983
10.0
254
7.50, 8.25
11.3
287
536
5205
110
2360
760
4805
110
2180
760
275/80R22.5
G
61426
26
75
18.7
476
40.5 1028 11.1
282
8.25, 7.50
12.2
311
513
6175
110
2800
760
5675
110
2575
760
11R24.5
G
51273
26
75
20.4
518
43.8 1113 11.1
281
8.25, 7.50
12.5
318
475
6610
105
3000
720
6005
105
2725
720
11R24.5 H
46695
28
75
20.4
519
43.9 1115 11.1
281
8.25, 7.50
12.5
318
474
7160
120
3250
830
6610
120
3000
830
Drive Tires
With chip and cut resistant tread compound.
Truck Tires
Specifications for Tread Design:
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
43
XDE A/T
®
The aggressive drive axle radial designed for vehicles operating
in mixed highway / off-road applications
• Extra wide tread designed to reduce sidewall vulnerability and extend treadlife while
helping to improve traction and handling
• Deep lateral grooves help provide high levels of traction with great performance in
over-the-road service
• Extra robust four-belt crown package with extra wide working plies help deliver
exceptional casing life
• Full-width elastic protector ply and extra thick rubber under the tread, help protect
the working plies from shocks, bruises and impacts
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XDE A/T
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
in.
Approved
Rims
mm.
Min. Dual
Spacing
(‡)
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
11R22.5
H
97124
30
65
19.7
499
42.1 1068 11.0
279
8.25, 7.50
12.5
318
494
6610
120
3000
830
6005
120
2725
830
kPa
12R22.5
H
67075
30
65
20.1
512
43.0 1092 11.8
300
8.25, 9.00
13.2
335
486
7390
120
3350
830
6780
120
3075
830
11R24.5
H
72631
30
65
20.7
525
44.1 1120 11.0
279
8.25, 7.50
12.5
318
470
7160
120
3250
830
6610
120
3000
830
XDY-2
™
The aggressive radial truck tire designed for on / off service in
severe conditions
Truck Tires
• Rugged directional tread with application specific compounds helps provide outstanding
self-cleaning capability combined with resistance to aggressions
• Deep lateral shoulder grooves aid water and mud dispersion to help enhance traction
• Extra robust four-belt crown package with extra wide working plies help deliver
exceptional casing life
• Extra thick sidewalls, designed to increase protection from shocks, snags and impacts
Drive Tires
• Full-width elastic protector ply and extra thick rubber under the tread help protect the
working plies from shocks, bruises and impacts
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XDY-2
Overall
Diameter
in.
mm.
™
Overall
Width
(‡)
in.
Approved
Rims
mm.
Min. Dual
Spacing
(‡)
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
11R22.5 (1)
H
77416
30
65
19.7
501
42.1 1069 11.0
279
8.25, 7.50
12.5
318
493
6610
120
3000
830
6005
120
2725
830
kPa
11R24.5 (1)
H
76789
30
65
20.6
524
44.1 1120 11.0
279
8.25, 7.50
12.5
318
469
7160
120
3250
830
6610
120
3000
830
(1) Directional tread design.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
44
XDY 3
(1)
®
(2)
The premium on / off road drive tire optimized for
exceptional traction and wear in mixed and severe
on / off road service.
• Michelin Co-Ex technology helps deliver 32/32nds OTD** of our
most aggression resistant tread compound while helping to keep
the crown package cool for a long casing life
• 12% increase in tread volume for increased mileage and durability (3)
+ 5% tread width (3)
+ 3% tread depth (3)
• Maximized traction in soft soil and mud through massive,
open lateral shoulder grooves
• Extra robust four-belt crown package with extra wide working
plies helps deliver exceptional casing life (4)
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XDY 3
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
in.
Approved
Rims
mm.
Min. Dual
Spacing
(‡)
Revs
per
Mile
Max. Tire Load
Single
lbs.
psi
kg.
kPa
Max. Tire Load
Dual
lbs.
psi
kg.
in.
mm.
11R22.5 (1)
G
47957
31
65
19.8
503
42.2 1072 11.3
287
8.25, 7.50
12.5
318
490
6175
105
2800
720
5840
105
2650
720
kPa
11R22.5 (1)
H
97079
31
65
19.8
503
42.2 1072 11.3
287
8.25, 7.50
12.5
318
490
6610
120
3000
830
6005
120
2725
830
315/80R22.5 (2, 4)
L
40302
31
65
20.0
508
43.3 1099 12.5
318
9.00, 8.25
13.8
351
480
9090
130
4125
900
8270
130
3750
900
11R24.5
(1)
H
47962
31
65
20.8
528
44.4 1127 11.3
287
8.25, 7.50
12.5
318
467
7160
120
3250
830
6610
120
3000
830
12R24.5
(1)
H
47966
31
65
21.3
542
45.6 1157 11.3
287
8.25, 9.00
13.2
335
454
7830
120
3550
830
7160
120
3250
830
** OTD - Original tread depth.
(1, 2) Tread design as indicated above the tire pictures.
(3) When compared to Michelin XDY-2 tire.
(4) The 315/80R22.5 has a directional tread design with three belt construction. Refer to Page 87 for service conditions on an 8.25” rim.
®
™
Truck Tires
XDY-EX
™
The aggressive drive axle radial designed for vehicles operating in
extreme conditions where maximized traction is the priority
• 32/32nds OTD** of rugged chip and cut resistant compound. Michelin Co-Ex technology
keeps the crown package cool for a long casing life
• Massive isolated tread blocks with wide tapered grooves help maximize deep snow and
mud traction while helping to minimize stone retention
Drive Tires
• Extra robust four-belt crown package with extra wide working plies helps deliver
exceptional casing life
• Extra thick sidewalls, designed to increase protection from shocks, snags and impacts
• Full-width elastic protector ply and extra thick rubber under the tread help protect the
working plies from shocks, bruises and impacts
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
11R24.5
H
46268
32
65
Loaded
Radius
in.
mm.
20.6
524
XDY-EX
Overall
Diameter
in.
mm.
™
Overall
Width
(‡)
in.
44.4 1127 11.4
Approved
Rims
mm.
289
8.25, 7.50
Min. Dual
Spacing
(‡)
in.
mm.
12.5
318
Revs
per
Mile
468
Max. Tire Load
Single
lbs.
psi
kg.
7160
120
3250
kPa
830
Max. Tire Load
Dual
lbs.
psi
kg.
6610
120
3000
kPa
830
** OTD - Original tread depth.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
45
(1)
XDN 2 / XDN 2 GRIP
®
®
(2)
The all weather premium drive tire optimized
for exceptional traction and mileage
• Michelin's patented Matrix™ siping technology helps provide
exceptional traction on dry and slippery surfaces. Over 1,300
biting edges combine to help provide excellent levels of
traction while the 3 dimensional Matrix™ sipes lock together
for the stability normally associated with solid tread blocks
• Extra wide tread (nearly 1" wider than Michelin XDN tire) helps
provide stability while helping to improve handling and mileage
®
®
• Full 27/32 tread depth helps provide long original tread life
• Wide, open shoulder grooves help deliver additional traction
balanced with tread life
Specifications for Tread Design:
XDN 2 / XDN 2 GRIP
®
®
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
Overall
Width
Overall
Diameter
in.
mm.
(‡)
(‡)
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
G
72805
27
75
19.5
495
41.7 1060 11.2
284
8.25, 7.50
12.5
318
496
6175
105
2800
720
5840
105
2650
720
11R22.5 (1)
H
64321
27
75
19.5
495
41.7 1060 11.2
284
8.25, 7.50
12.5
318
496
6610
120
3000
830
6005
120
2725
830
12R22.5
mm.
Min. Dual
Spacing
11R22.5 (1)
(1)
in.
Approved
Rims
kPa
H
51753
27
75
20.0
508
42.9 1089 11.3
287
8.25, 9.00
13.2
335
483
7390
120
3350
830
6780
120
3075
830
275/80R22.5 (1)
G
63465
27
75
18.9
481
40.6 1030 11.0
279
8.25, 7.50
12.2
311
511
6175
110
2800
760
5675
110
2575
760
315/80R22.5 (2, 3)
L
04355
28
75
20.0
507
43.1 1094 12.5
317
9.00, 8.25 (3)
13.8
351
486
9090
130
4125
900
8270
130
3750
900
G
87459
27
75
20.4
519
43.7 1111 11.2
284
8.25, 7.50
12.5
318
473
6610
105
3000
720
6005
105
2725
720
11R24.5
(1)
11R24.5
(1)
275/80R24.5 (1)
H
87129
27
75
20.5
522
43.8 1112 11.2
284
8.25, 7.50
12.5
318
473
7160
120
3250
830
6610
120
3000
830
G
75684
27
75
19.6
497
41.8 1061 10.6
270
8.25, 7.50
12.2
311
495
6175
110
2800
760
5675
110
2575
760
(1) XDN 2 tread design (non-directional).
(2) XDN 2 GRIP tread design (directional).
(3) For use with 8.25x22.5 wheels, see Page 87.
®
®
Truck Tires
XDS
®
The drive axle radial for year-round traction and optimized for
severe winter conditions
• Rugged directional tread design helps boost snow and ice traction and helps reduce
heel/toe wear typically associated with open shoulder designs
• Full-width patented zig-zag sipes interlock to enhance block stability under torque while
helping to provide extra bite, especially in deep snow
Drive Tires
• Deep V shaped lateral shoulder grooves help maximize mud and snow evacuation
• Extra robust four-belt crown package with extra wide working plies help deliver
exceptional casing life
• Full-width elastic protector ply and extra thick rubber under the tread help protect the
working plies from shocks, bruises and impacts
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XDS
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
mm.
Min. Dual
Spacing
(‡)
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
11R22.5 (1)
H
53709
26
65
19.5
496
41.8 1062 11.0
279
8.25, 7.50
12.5
318
496
6610
120
3000
830
6005
120
2725
830
12R22.5 (1)
H
62208
26
65
19.9
506
42.8 1087 11.8
300
8.25, 9.00
13.2
335
484
7390
120
3350
830
6780
120
3075
830
(1)
H
43825
26
65
20.5
521
43.9 1114 11.0
279
8.25, 7.50
12.5
318
472
7160
120
3250
830
6610
120
3000
830
11R24.5
in.
Approved
Rims
kPa
(1) Directional tread design.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
46
X One XTA
®
®
The latest Michelin trailer axle innovation that helps
deliver optimized fuel efficiency and significant weight
savings in long haul operations
• Engineered to replace duals on long haul trailer axle fitments
• Advanced technology compounds offer remarkable fuel savings balanced
with wet traction, mileage and even wear
• Four unique decoupling ribs help provide excellent resistance to irregular wear
• Features Michelin's patented Infini-Coil technology , incorporating1/4 mile of
continuous steel cable to help eliminate casing growth and ensure a consistent
footprint
™
Specifications for Tread Design:
Size
445/50R22.5 (1)
Load
Range
Catalog
Number
Tread
Depth
32nds
L
49694
13
Max
Speed
X One XTA
®
Loaded Radius
®
Overall Diameter
Overall Width
(*)
(‡)
mph
in.
mm.
in.
mm.
in.
mm.
75
18.2
463
39.5
1003
17.1
435
Approved
Rims
Revs
per
Mile
14.00
527
Approved
Rims
Revs
per
Mile
lbs.
10200
Max. Tire Load
Single
psi
kg.
kPa
120
830
4625
(1) Equivalent overall diameter to Michelin 275/80R22.5 trailer tire offering.
X One XTE
®
™
Truck Tires
The latest Michelin trailer axle innovation that helps
deliver optimized weight savings and significant fuel
efficiency in highway and regional operations
• Engineered to replace duals on highway and regional trailer axle fitments
• Michelin's best scrub resistant (chip and cut resistant in designated version)
compounds offer remarkable resistance to scrub balanced with wet traction
or mileage
• Unique nine rib design helps deliver stability and excellent resistance to
uneven wear
• Features Michelin's patented Infini-Coil technology , incorporating a 1/4 mile
of continuous steel cable to help eliminate casing growth and ensure a
consistent footprint
Specifications for Tread Design:
Max
Speed
Trailer Tires
™
X One XTE
®
Load
Range
Catalog
Number
Tread
Depth
32nds
mph
in.
mm.
in.
mm.
in.
mm.
445/50R22.5 (1)
L
59070
16
75
18.3
464
39.7
1008
17.1
435
14.00
525
455/55R22.5 (2)
L
82791
16
75
19.2
489
41.7
1058
17.6
447
14.00
500
Size
Loaded Radius
™
Overall Diameter
Overall Width
(*)
(‡)
Max. Tire Load
Single
psi
kg.
kPa
10200
120
4625
830
11000
125
5000
860
lbs.
With chip and cut resistant tread compound.
(1) Equivalent overall diameter to Michelin 275/80R22.5 trailer tire offering.
(2) Equivalent overall diameter to Michelin 11R22.5 or 275/80R24.5 trailer tire offering.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
47
XTA Energy
®
The most fuel-efficient, quietest standard trailer tire for long
haul service
• Latest Advanced Technology tread compounds for outstanding fuel efficiency
• 13/32 tread depth to help resist irregular wear
• Four see-through circumferential grooves aid water evacuation for excellent wet
weather performance
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
275/80R22.5
G
73176
13
75
Loaded
Radius
in.
mm.
18.4
467
XTA Energy
®
Overall
Width
Overall
Diameter
in.
mm.
(‡)
in.
Approved
Rims
mm.
39.6 1007 11.0
280
8.25, 7.50
Min. Dual
Spacing
(‡)
in.
mm.
12.2
311
Revs
per
Mile
lbs.
524
6175
Max. Tire Load
Single
psi
kg.
110
2800
kPa
lbs.
760
5675
(1)
Max. Tire Load
Dual
psi
kg.
110
2575
kPa
760
(2)
XTA 2 Energy
®
Truck Tires
The fuel-efficient, small diameter trailer tire that
helps deliver long, even tread wear in high cube
highway service
• Advanced technology compounds formulated to help provide
low rolling resistance and cool operating temperatures
• See-through circumferential grooves promote efficient water
evacuation for good wet braking and traction throughout the
life of the tire
Trailer Tires
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XTA 2 Energy
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
in.
mm.
Approved
Rims
Min. Dual
Spacing
(‡)
in.
mm.
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
kPa
lbs.
Max. Tire Load
Dual
psi
kg.
kPa
235/75R17.5 (1)
J
88143
13
62
14.2
361
31.2
792
9.5
241
6.75, 7.50
10.3
262
670
6005
125
2725
860
5675
125
2575
860
245/70R17.5 (1)
J
78370
13
62
14.2
361
31.2
792
9.5
241
6.75, 7.50
10.6
270
670
6005
125
2725
860
5675
125
2575
860
265/70R19.5
(2)
J
83728
15
62
15.7
400
34.1
865
10.4
265 7.50, 6.75, 8.25 11.6
295
612
6005
120
2725
830
5675
120
2575
830
445/45R19.5
(3)
M
69910
18
62
16.3
414
35.7
906
17.1
434
585
9920
130
4500
900
14.00
(1, 2) Tread design as indicated above the tire pictures.
(3) Tread design not shown.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
48
XT-1
®
The fuel-efficient, standard trailer tire that helps deliver long,
even tread wear in long haul service
• Standardized casing dimensions help ensure interchangeability with Michelin long
haul steer and drive casings for efficient casing management
• Curb guard ribs help provide added defense against injuries from curbing
• Unique shoulder groove design helps provide excellent resistance to uneven
shoulder wear
• Four see-through circumferential grooves aid water evacuation for good wet
weather performance
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XT-1
®
Overall
Width
Overall
Diameter
in.
mm.
(‡)
in.
Approved
Rims
mm.
Min. Dual
Spacing
(‡)
Revs
per
Mile
Max. Tire Load
Single
lbs.
psi
kg.
kPa
Max. Tire Load
Dual
lbs.
psi
kg.
in.
mm.
11R22.5
G
02078
12
75
19.1
485
40.8 1036 11.2
285
8.25, 7.50
12.5
318
501
6175
105
2800
720
5840
105
2650
720
kPa
275/80R22.5
G
19518
12
75
18.4
467
39.7 1008 11.1
281
8.25, 7.50
12.2
311
524
6175
110
2800
760
5675
110
2575
760
11R24.5
G
22754
12
75
20.0
508
43.0 1092 11.1
283
8.25, 7.50
12.5
318
483
6610
105
3000
720
6005
105
2725
720
275/80R24.5
G
29684
12
75
19.1
485
40.8 1036 10.8
274
8.25, 7.50
12.2
311
501
6175
110
2800
760
5675
110
2575
760
Max. Tire Load
Single
psi
kg.
kPa
lbs.
XTA
®
Truck Tires
The small diameter highway trailer tire optimized for
low platform, high cube trailers
• Application specific compound
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
Trailer Tires
• Significant groove angles to help resist stone retention drilling
XTA
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
in.
mm.
Approved
Rims
Min. Dual
Spacing
(‡)
in.
mm.
Revs
per
Mile
lbs.
Max. Tire Load
Dual
psi
kg.
kPa
10.00R15 (1)
J
70667
14
55
16.5
419
36.0
914
10.6
269
7.50, 7.00
12.5
318
579
6940
120
3150
830
6395
120
2900
830
7.50R15 (1)
H
89279
13
55
13.9
354
30.3
769
8.3
210
6.00, 5.00
9.5
242
688
4805
120
2180
830
4540
120
2060
830
(1)
H
27383
14
55
15.0
382
32.9
836
9.1
230
6.50, 7.00
10.4
265
633
6005
120
2725
830
5675
120
2575
830
J
82636
15
62
14.1
359
30.7
779
8.7
221
6.00, 6.75
9.4
239
679
4805
120
2180
830
4540
120
2060
830
8.25R15
215/75R17.5
(1) For tube and flap information see Page 80 - 81.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
49
XTE
™
The robust trailer radial designed to withstand the demands
of high scrub and spread axle service
• Long treadlife from 16/32 of application specific compounds
• Smooth, even wear in high scrub service from beefy, solid shoulders and trailer
optimized design
• Protection from impacts and curbing promoted by sidewall scallops and curb
guard features
• Standardized casing dimensions help ensure interchangeability with Michelin long
haul steer and drive casings for efficient casing management
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XTE
™
Overall
Width
Overall
Diameter
in.
mm.
(‡)
in.
Approved
Rims
mm.
Min. Dual
Spacing
(‡)
Revs
per
Mile
lbs.
Max. Tire Load
Single
psi
kg.
Max. Tire Load
Dual
psi
kg.
in.
mm.
kPa
lbs.
11R22.5
G
44340
16
75
19.1
484
41.0 1041 11.3
288
8.25, 7.50
12.5
318
506
6175
105
2800
720
5840
105
2650
720
kPa
275/80R22.5
G
89823
16
75
18.6
472
39.8 1012 11.0
280
8.25, 7.50
12.2
311
520
6175
110
2800
760
5675
110
2575
760
11R24.5
G
73708
16
75
20.0
509
43.0 1093 11.3
286
8.25, 7.50
12.5
318
482
6610
105
3000
720
6005
105
2725
720
275/80R24.5
G
40644
16
75
19.2
488
41.1 1043 10.7
272
8.25, 7.50
12.2
311
504
6175
110
2800
760
5675
110
2575
760
May not be processed on North American Fleet Account delivery receipts.
XTE2
®
Truck Tires
The robust small diameter trailer tire designed to
withstand the demands of high scrub and spread axle
service on low platform and specialty trailers
• Dual compound rubber helps ensure cool operating temperatures while
upper tread abrasion resistance helps keep wear rates low
• Deep, wide channels help provide excellent water evacuation throughout
the life of the tire
• Lateral siping along rib edges help enhance traction and braking in adverse
weather conditions
Trailer Tires
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
Loaded
Radius
in.
mm.
XTE2
Overall
Diameter
in.
mm.
®
Overall
Width
(‡)
Approved
Rims
Min. Dual
Spacing
(‡)
Revs
per
Mile
Max. Tire Load
Single
lbs.
psi
kg.
kPa
Max. Tire Load
Dual
lbs.
psi
kg.
in.
mm.
in.
mm.
235/75R17.5
J
01963
15
65
14.3
363
31.3
796
9.5
241
6.75, 7.50
10.3
262
668
6005
125
2725
860
5675
125
2575
860
kPa
285/70R19.5
J
37840
18
65
16.1
409
35.2
894
11.2
285
8.25, 9.00
12.2
311
594
7390
130
3350
900
6940
130
3150
900
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
50
XTY 2
®
The low profile radial designed for rugged, mixed trailer service
• Compound for chip and cut resistance to help resist the abusive conditions of on/off
road applications
• Four steel belt construction helps deliver extra casing protection and added stability
• Extra wide protector ply extends under all major grooves and helps protect the
working plies from most bruising and penetrations
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
J
42407
21
62
17.7
450
®
Overall
Diameter
in.
mm.
38.2
970
Overall
Width
(‡)
in.
mm.
10.9
276
Approved
Rims
7.50, 8.25
Min. Dual
Spacing
(‡)
in.
mm.
11.9
303
Revs
per
Mile
lbs.
544
6940
Max. Tire Load
Single
psi
kg.
120
3150
kPa
lbs.
830
6395
Max. Tire Load
Dual
psi
kg.
120
2900
kPa
830
Trailer Tires
Truck Tires
275/70R22.5
Loaded
Radius
in.
mm.
XTY 2
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
51
XTE2
®
WIDE BASE
The all-wheel position wide base radial that helps deliver high
mileage and a quiet ride in heavy front axle regional service
• Dual compound rubber helps ensure cool operating temperatures while abrasion
resistant upper tread helps keep wear rates low
• Deep, wide channels help provide excellent water evacuation throughout the life
of the tire
• Lateral siping along rib edges help enhance traction and braking in adverse
weather conditions
• Robust crown design with 4-steel belt package
Specifications for Tread Design:
Max
Speed
XTE2
WIDE BASE
Approved
Rims
Revs
per
Mile
368
10.00V, 10.00
479
14.9
379
11.75, 12.25
1130
16.6
421
1158
17.8
451
Load
Range
Catalog
Number
Tread
Depth
32nds
mph
in.
mm.
in.
mm.
in.
mm.
365/80R20 (1)
L
84879
21
65
20.1
510
43.4
1102
14.5
385/65R22.5
L
94098
21
65
19.6
497
42.2
1072
425/65R22.5
L
45276
21
65
20.6
522
44.5
445/65R22.5
L
58004
21
65
21.0
534
45.6
Size
Loaded Radius
®
Overall Diameter
Overall Width
(*)
Max. Tire Load
Single
psi
kg.
kPa
10000
130
4540
900
492
9920
130
4500
900
13.00, 12.25
468
11400
120
5150
830
14.00, 13.00
457
12800
130
5800
900
lbs.
Max. Tire Load
Dual
psi
kg.
(‡)
lbs.
(1) For tube and flap information see Page 80 - 81.
XZA 4
®
The high capacity tube type all-position tire designed for
heavy axle applications such as mobile cranes
Truck Tires
• Five deep circumferential grooves for excellent water evacuation and wet
traction
• Full-width working plies help provide a flat footprint for exceptional stability
• Extra high load carrying capacity for the tough requirements of special
applications
• Maximum speed 50 mph
Special Application Tires
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
G20 (14.00R20) (1)
M
70870
18
50
XZA 4
Loaded
Radius
in.
mm.
22.4
568
®
Overall
Diameter
in.
mm.
Overall
Width
(‡)
in.
48.8 1239 15.0
Approved
Rims
mm.
380
10.00
Min. Dual
Spacing
(‡)
Revs
per
Mile
Max. Tire Load
Single
psi
kg.
in.
mm.
lbs.
16.8
426
428 11000 115
5000
kPa
790 10200 115
4625
kPa
790
(1) For tube and flap information see Page 80 - 81.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
52
XZL
™
WIDE BASE
The all-position wide base radial designed for optimized
on/off road traction
• Self-cleaning, open-shoulder tread design features offset elements to help
enhance traction and floatation capabilities
• Stable block design helps ensure a consistent footprint, even in free rolling
positions, to help deliver smooth even wear and a quiet ride
• Deep, application specific compounds help provide resistance to
aggressions and abrasion common in off road service
• Full-width steel belts and elastic protector ply help protect the casing
against shocks, bruising and penetrations
XZL
™
Specifications for Tread Design:
Max
Speed
WIDE BASE
421
13.00, 12.25
467
448
14.00, 13.00
453
Tread
Depth
32nds
mph
in.
mm.
in.
mm.
in.
mm.
425/65R22.5
L
53254
26
60
20.6
524
44.8
1139
16.6
445/65R22.5
L
84103
27
60
21.2
538
46.0
1168
17.6
®
Overall Diameter
Revs
per
Mile
Catalog
Number
XZY 3
Loaded Radius
Approved
Rims
Load
Range
Size
Overall Width
(*)
(‡)
Max. Tire Load
Single
psi
kg.
kPa
11400
120
5150
830
12300
120
5600
830
lbs.
WIDE BASE
The premium all-position wide base radial designed for heavy
front axle service in mixed service applications
®
XZY 3
®
Specifications for Tread Design:
Size
445/65R19.5 (2)
Load
Range
Catalog
Number
Tread
Depth
32nds
L
54436
22
Max
Speed
Loaded Radius
WIDE BASE
Overall Diameter
Overall Width
(*)
(‡)
mph
in.
mm.
in.
mm.
in.
mm.
65
19.5
495
42.6
1081
17.8
451
Approved
Rims
Revs
per
Mile
14.00, 13.00
493
lbs.
11400
Max. Tire Load
Single
psi
kg.
kPa
120
830
5150
385/65R22.5
J
53779
22
65
19.6
499
42.4
1078
14.9
379
11.75, 12.25
491
9370
120
4250
830
425/65R22.5
L
40321
23
65
20.6
523
44.7
1136
16.6
421
13.00, 12.25
465
11400
120
5150
830
445/65R22.5
L
83691
23
65
21.1
536
45.8
1164
17.8
451
14.00, 13.00
455
12800
130
5800
900
Special Application Tires
Truck Tires
• Improved traction in soft soil and mud promoted by aggressive new tread design(1)
• Improved floatation offered by wider tread (almost 1 inch wider than
XZY Wide Base)
• Great resistance to shocks, bruising and penetrations fostered by new four-belt
design featuring full-width elastic protector ply
• Added sidewall and shoulder protection from thicker rubber and new aggressive
shoulder design
• Improved wet traction throughout the tread life cultivated by deep, wide
circumferential grooves and minimized bridging between tread elements
(1) When compared with XZY Wide Base.
(2) 445/65R19.5 available in XZY Wide Base tread only.
®
®
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
53
XDL
®
The high capacity tube type drive tire designed for mostly
off road application such as logging and mining
• Open shoulder design for enhanced self-cleaning capability and soft soil mobility
• Massive tread elements offer exceptional resistance to cuts and penetrations
• Application specific compound helps resist cutting, chipping and chunking
common in severe off road service
• Maximum speed 50 mph
20% Highway / 80% Off road
XDL
Specifications for Tread Design:
Max
Load Catalog Tread Speed
(*)
Range Number Depth
32nds mph
Size
12.00R24 (1)
J
30049
38
50
Loaded
Radius
in.
mm.
23.1
586
Overall
Diameter
in.
mm.
®
Overall
Width
(‡)
in.
Min. Dual
Spacing
Approved
Rims
(‡)
mm.
49.4 1255 12.7
323
8.50, 8.00
in.
mm.
14.1
358
Revs
per
Mile
lbs.
422
9370
Max. Tire Load
Single
psi
kg.
120
4250
kPa
lbs.
830
8540
Max. Tire Load
Dual
psi
kg.
120
3875
kPa
830
(1) For tube and flap information see Page 80 - 81.
XS
™
The soft soil, all-position radial for special service such as
Emergency Response vehicles
Truck Tires
• Tread design optimized to help minimize sandy surface disturbance
• Efficient grip with exceptional floatation capabilities
Steer / All-position Tires
Specifications for Tread Design:
Load
Range
Size
24R20.5
H
Catalog
Number
23002
Tread
Depth
32nds
21
Max
Speed
XS
™
Loaded Radius
Overall Diameter
Overall Width
(*)
(‡)
mph
in.
mm.
in.
mm.
in.
mm.
50
24.4
620
54.1
1374
23.7
602
Approved
Rims
Revs
per
Mile
lbs.
18.00
388
15700
Max. Tire Load
Single
psi
kg.
85
7100
kPa
590
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
54
XZL
™
The all-terrain, all-position radial for special service such as
Emergency Response vehicles
• Self-cleaning, open shoulder tread design features offset elements to help
enhance traction and floatation capabilities on varied terrains including snow,
sand, mud and highway
• Non-directional design for versatility
• Full-width steel belts and elastic protector ply help provide added casing
protection against most off road hazards
• Tubeless construction compatible with Central Tire Inflation systems and bead
locks
Specifications for Tread Design:
Max
Speed
XZL
™
Overall Diameter
Revs
per
Mile
388
10.00W, 10.00
446
9370
95
4250
660
608
18.00
383
15700
85
7100
590
Catalog
Number
Tread
Depth
32nds
mph
in.
mm.
in.
mm.
in.
mm.
395/85R20 (1, 2)
G
37727
33
70
21.4
544
46.8
1189
15.3
24R21 (1, 2)
H
76025
31
55
24.8
631
54.6
1388
23.9
Size
Loaded Radius
Approved
Rims
Load
Range
Overall Width
(*)
(‡)
lbs.
Max. Tire Load
Single
psi
kg.
kPa
Special Application Tires
Truck Tires
(1) For tube and flap information see Page 80 - 81.
(2) Tubeless, may be used with tube.
Note: Rim listed first is the measuring rim.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
Michelin tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
®
55
MICHELIN INFLATION CHARTS FOR TRUCK TIRES
To select the proper load and inflation table, locate
your tire size in the following pages, then match your tire's
sidewall markings to the table with the same sidewall
markings. If your tire's sidewall markings do not match
any table listed, please contact your Michelin dealer for
the applicable load and inflation table.
product information to reflect these changes. Printed
material may not reflect the latest load and inflation
standards.
Industry load and inflation standards are in a constant
state of change, and Michelin continually updates its
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
WHEEL DIAMETER - 15”
7.50R15 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
6900
7200
7500
7800
8100
8400
8700
9000
9300
9610
S
DUAL
13040
13640
14240
14840
15400
15960
16250
14120
17680
18160
D
4805 LBS at 120 PSI
4540 LBS at 120 PSI
SINGLE
3130
3266
3402
3538
3674
3810
3946
4082
4218
4360
S
2180 KG
at 830 kPa
DUAL
5915
6187
6459
6731
6985
7239
7371
6405
8020
8240
D
2060 KG
at 830 kPa
8.25R15 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
SINGLE
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
8250
8680
9110
9540
9960
10380
10790
11200
11610
12010
S
6005 LBS at 120 PSI
15580
16420
17220
18040
18840
19620
20400
21180
21940
22700
D
5675 LBS at 120 PSI
SINGLE
3740
3920
4140
4320
4540
4700
4860
5080
5240
5450
S
2725 KG
at 830 kPa
DUAL
7080
7400
7840
8160
8560
8880
9200
9600
9920
10300
D
2575 KG
at 830 kPa
DUAL
10.00R15 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
9530
10030
10530
11030
11510
12000
12470
12950
13420
13880
S
DUAL
17560
18500
19420
20320
21220
22100
22980
23860
24720
25580
D
6395 LBS at 120 PSI
SINGLE
4340
4540
4800
4980
5240
5440
5620
5880
6060
6300
S
3150 KG
at 830 kPa
DUAL
7960
8360
8840
9200
9640
10000
10360
10800
11160
11600
D
2900 KG
at 830 kPa
LBS
Truck Tires
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
6940 LBS at 120 PSI
WHEEL DIAMETER - 17.5”
10R17.5 LRG
PSI
85
90
95
100
105
110
115
kPa
590
620
660
690
720
760
790
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
7720
8010
8300
8600
8940
9280
9610
S
4805 LBS at 115 PSI
DUAL
14560
15140
15720
16320
16940
17560
18160
D
4540 LBS at 115 PSI
SINGLE
3500
3640
3780
3900
4060
4220
4360
S
2180 KG
at 790 kPa
DUAL
6600
6880
7160
7400
7680
7960
8240
D
2060 KG
at 790 kPa
215/75R17.5 LRG
PSI
55
60
65
70
75
80
85
90
95
100
kPa
380
410
450
480
520
550
590
620
660
690
LBS
KG
SINGLE
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
4650
4980
5310
5640
5960
6270
6590
6890
7200
7500
S
DUAL
8740
9380
9980
10600
11200
11800
12380
12960
13540
14100
D
3750 LBS at 100 PSI
3525 LBS at 100 PSI
SINGLE
2110
2240
2420
2540
2720
2840
3000
3120
3280
3400
S
1700 KG
at 690 kPa
DUAL
3960
4240
4560
4800
5120
5320
5640
5880
6160
6400
D
1600 KG
at 690 kPa
215/75R17.5 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
6750
7080
7390
7720
8020
8360
8660
8990
9300
9610
S
4805 LBS at 120 PSI
4540 LBS at 120 PSI
LBS
KG
56
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
DUAL
12790
13400
14000
14590
15190
15780
16380
16980
17570
18160
D
SINGLE
3062
3211
3352
3502
3638
3792
3928
4078
4218
4360
S
2180 KG
at 830 kPa
DUAL
5802
6078
6350
6618
6890
7158
7430
7702
7970
8240
D
2060 KG
at 830 kPa
To select the proper load and inflation table, locate your tire
size in the following pages, then match your tire's sidewall markings
to the table with the same sidewall markings. If your tire's sidewall
markings do not match any table listed, please contact your
Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of
change, and Michelin continually updates its product information
to reflect these changes. Printed material may not reflect the latest
load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 17.5”
235/75R17.5 LRJ
PSI
80
85
90
95
100
105
110
115
120
125
kPa
550
590
620
660
690
720
760
790
830
860
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
8400
8820
9230
9640
10050
10450
10840
11240
11620
12010
S
DUAL
15880
16680
17460
18220
18980
19740
20500
21240
21980
22700
D
6005 LBS at 125 PSI
5675 LBS at 125 PSI
SINGLE
3820
4040
4200
4400
4560
4720
4940
5100
5300
5450
S
2725 KG
at 860 kPa
DUAL
7200
7600
7920
8320
8640
8920
9320
9640
10000
10300
D
2575 KG
at 860 kPa
245/70R17.5 LRJ
PSI
80
85
90
95
100
105
110
115
120
125
kPa
550
590
620
660
690
720
760
790
830
860
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
8400
8820
9230
9640
10050
10450
10840
11240
11620
12010
S
DUAL
15880
16680
17460
18220
18980
19740
20500
21240
21980
22700
D
6005 LBS at 125 PSI
5675 LBS at 125 PSI
SINGLE
3820
4040
4200
4400
4560
4720
4940
5100
5300
5450
S
2725 KG
at 860 kPa
DUAL
7200
7600
7920
8320
8640
8920
9320
9640
10000
10300
D
2575 KG
at 860 kPa
WHEEL DIAMETER - 19.5”
8R19.5 LRF
PSI
70
75
80
85
90
95
100
105
110
kPa
480
520
550
590
620
660
690
720
760
SINGLE
5080
5360
5670
5910
6150
6390
6610
6830
7050
S
3525 LBS at 110 PSI
DUAL
9840
10280
10720
11140
11560
12000
12400
12800
13220
D
3305 LBS at 110 PSI
SINGLE
2300
2440
2570
2680
2800
2900
3000
3100
3200
S
1600 KG
at 760 kPa
DUAL
4480
4680
4860
5040
5240
5440
5640
5840
6000
D
1500 KG
at 760 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
PSI
65
70
75
80
85
90
95
kPa
450
480
520
550
590
620
660
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
5510
5790
6080
6390
6630
6900
7280
S
3640 LBS at
95 PSI
DUAL
10400
10880
11440
12000
12460
12980
13660
D
3415 LBS at
95 PSI
SINGLE
2500
2620
2760
2900
3000
3140
3300
S
1650 KG
at 660 kPa
DUAL
4720
4920
5200
5440
5640
5880
6200
D
1550 KG
at 660 kPa
Truck Tires
225/70R19.5 LRF
225/70R19.5 LRG
PSI
65
70
75
80
85
90
95
100
105
110
kPa
450
480
520
550
590
620
660
690
720
760
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
5510
5790
6080
6390
6630
6900
7280
7430
7690
7940
S
3970 LBS at 110 PSI
DUAL
10400
10880
11440
12000
12460
12980
13660
13960
14460
15000
D
3750 LBS at 110 PSI
SINGLE
2500
2620
2760
2900
3000
3140
3300
3380
3480
3600
S
1800 KG
at 760 kPa
DUAL
4720
4920
5200
5440
5640
5880
6200
6320
6560
6800
D
1700 KG
at 760 kPa
245/70R19.5 LRF
PSI
80
85
90
95
kPa
550
590
620
660
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
7280
7480
7780
8160
S
4080 LBS at
95 PSI
DUAL
13660
14060
14620
15440
D
3860 LBS at
95 PSI
SINGLE
3300
3400
3540
3700
S
1850 KG
at 660 kPa
DUAL
6200
6360
6640
7000
D
1750 KG
at 660 kPa
245/70R19.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
6780
7140
7500
7850
8200
8540
8880
9220
9550
9880
S
DUAL
12840
13520
14200
14860
15520
16160
16800
17440
18080
18700
D
4940 LBS at 120 PSI
4675 LBS at 120 PSI
SINGLE
3080
3220
3400
3540
3720
3860
4000
4180
4300
4480
S
2240 KG
at 830 kPa
DUAL
5840
6120
6440
6720
7040
7320
7560
7920
8160
8480
D
2120 KG
at 830 kPa
57
To select the proper load and inflation table, locate your tire
size in the following pages, then match your tire's sidewall markings
to the table with the same sidewall markings. If your tire's sidewall
markings do not match any table listed, please contact your
Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of
change, and Michelin continually updates its product information
to reflect these changes. Printed material may not reflect the latest
load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 19.5”
265/70R19.5 LRG
PSI
65
70
75
80
85
90
95
100
105
110
kPa
450
480
520
550
590
620
660
690
720
760
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
7230
7680
8110
8540
8970
9390
9800
10210
10620
11020
S
DUAL
13660
14500
15320
16140
16940
17740
18520
19300
20060
20820
D
5510 LBS at 110 PSI
5205 LBS at 110 PSI
SINGLE
3280
3460
3700
3860
4080
4240
4460
4620
4780
5000
S
2500 KG
at 760 kPa
DUAL
6200
6520
6960
7280
7720
8040
8440
8720
9040
9440
D
2360 KG
at 760 kPa
265/70R19.5 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
8250
8680
9110
9540
9960
10380
10790
11200
11610
12010
S
6005 LBS at 120 PSI
DUAL
15580
16420
17220
18040
18840
19620
20400
21180
21940
22700
D
5675 LBS at 120 PSI
SINGLE
3740
3920
4140
4320
4540
4700
4860
5080
5240
5450
S
2725 KG
at 830 kPa
DUAL
7080
7400
7840
8160
8560
8880
9200
9600
9920
10300
D
2575 KG
at 830 kPa
285/70R19.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
8780
9250
9710
10160
10610
11050
11490
11930
12360
12790
S
6395 LBS at 120 PSI
DUAL
16500
17360
18220
19080
19920
20760
21580
22400
23220
24020
D
6005 LBS at 120 PSI
SINGLE
3980
4180
4420
4600
4820
5000
5180
5400
5580
5800
S
2900 KG
at 830 kPa
DUAL
7480
7840
8280
8640
9080
9400
9720
10160
10480
10900
D
2725 KG
at 830 kPa
285/70R19.5 LRJ
Truck Tires
PSI
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
SINGLE
10520
11010
11500
11980
12460
12930
13400
13860
14320
14780
S
DUAL
19760
20680
21600
22500
23400
24280
25160
26040
26920
27760
D
6940 LBS at 130 PSI
SINGLE
4780
4980
5220
5420
5600
5860
6040
6280
6460
6700
S
3350 KG
at 900 kPa
DUAL
9000
9360
9840
10200
10560
11000
11360
11800
12160
12600
D
3150 KG
at 900 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
7390 LBS at 130 PSI
305/70R19.5 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
9530
10030
10530
11030
11510
12000
12470
12950
13420
13880
S
DUAL
17560
18500
19420
20320
21220
22100
22980
23860
24720
25580
D
6395 LBS at 120 PSI
SINGLE
4340
4540
4800
4980
5240
5440
5620
5880
6060
6300
S
3150 KG
at 830 kPa
DUAL
7960
8360
8840
9200
9640
10000
10360
10800
11160
11600
D
2900 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
6940 LBS at 120 PSI
445/45R19.5 LRM
PSI
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
14120
14780
15440
16080
16720
17360
17980
18600
19220
19840
S
9920 LBS at 130 PSI
6420
6680
7020
7280
7520
7860
8100
8440
8680
9000
S
4500 KG
LBS
KG
SINGLE
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
DUAL
SINGLE
at 900 kPa
DUAL
445/65R19.5 LRL
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
15660
16480
17300
18120
18920
19700
20400
21200
22000
22800
S
SINGLE
7080
7420
7840
8160
8580
8880
9200
9600
9900
10300
S
LBS
KG
58
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
11400 LBS at 120 PSI
5150 KG
at 830 kPa
To select the proper load and inflation table, locate your tire
size in the following pages, then match your tire's sidewall markings
to the table with the same sidewall markings. If your tire's sidewall
markings do not match any table listed, please contact your
Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of
change, and Michelin continually updates its product information
to reflect these changes. Printed material may not reflect the latest
load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 20”
9.00R20 LRG
PSI
60
65
70
75
80
85
90
95
100
105
kPa
410
450
480
520
550
590
620
660
690
720
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
7040
7510
7970
8420
8870
9310
9740
10170
10600
11020
S
DUAL
12960
13820
14660
15500
16320
17120
17920
18720
19500
20280
D
5510 LBS at 105 PSI
5070 LBS at 105 PSI
SINGLE
3180
3440
3620
3860
4040
4260
4440
4660
4840
5000
S
2500 KG
at 720 kPa
DUAL
5880
6320
6640
7080
7400
7840
8160
8600
8880
9200
D
2300 KG
at 720 kPa
10.00R20 LRH
PSI
70
75
80
85
90
95
100
105
110
115
kPa
480
520
550
590
620
660
690
720
760
790
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
9120
9630
10140
10650
11150
11640
12130
12610
13090
13560
S
DUAL
16140
17060
17960
18860
19740
20620
21480
22340
23180
24020
D
6780 LBS at 115 PSI
6005 LBS at 115 PSI
SINGLE
4120
4400
4600
4860
5060
5320
5520
5720
5960
6150
S
3075 KG
at 790 kPa
DUAL
7370
7800
8160
8640
8960
9440
9800
10120
10560
10920
D
2725 KG
at 790 kPa
11.00R20 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
10400
10900
11380
12010
12410
12810
13220
13740
14260
14780
S
DUAL
19960
20760
21560
22700
23140
23580
24020
25060
26100
27120
D
6780 LBS at 120 PSI
SINGLE
4720
4940
5160
5450
5640
5820
6000
6240
6480
6700
S
3350 KG
at 830 kPa
DUAL
9040
9440
9800
10300
10520
10720
10900
11360
11840
12300
D
3075 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
7390 LBS at 120 PSI
12.00R20 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
11840
12400
12960
13480
14320
14760
15200
15660
16100
16540
S
DUAL
22720
23640
24560
25440
26440
27160
27880
28640
29560
30440
D
7610 LBS at 120 PSI
SINGLE
5380
5620
5880
6120
6500
6700
6900
7100
7300
7500
S
3750 KG
at 830 kPa
DUAL
10320
10720
11160
11520
12000
12320
12640
13000
13400
13800
D
3450 KG
at 830 kPa
KG
8270 LBS at 120 PSI
Truck Tires
LBS
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
G20 (14.00R20) LRM
PSI
70
75
80
85
90
95
100
105
110
115
kPa
480
520
550
590
620
660
690
720
760
790
SINGLE
15660
16500
17200
18180
18920
19660
20400
20940
21480
22000
S
DUAL
28640
30120
31600
33080
34560
36040
37480
38600
39720
40800
D 10200 LBS at 115 PSI
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
11000 LBS at 115 PSI
SINGLE
7100
7480
7860
8250
8580
8920
9250
9500
9760
10000
S
5000 KG
at 790 kPa
DUAL
13000
13680
14360
15000
15680
16360
17000
29520
18040
18500
D
4625 KG
at 790 kPa
365/80R20 LRL
PSI
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
SINGLE
14240
14900
15560
16220
16860
17500
18140
18760
19380
20000
S
SINGLE
6480
6740
7080
7340
7600
7940
8180
8520
8760
9080
S
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
10000 LBS at 130 PSI
4540 KG
at 900 kPa
395/85R20 LRG
PSI
80
85
90
95
kPa
550
590
620
660
SINGLE
16820
17560
18280
18740
S
9370 LBS at
SINGLE
7640
7960
8280
8500
S
4250 KG
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
95 PSI
at 660 kPa
59
To select the proper load and inflation table, locate your tire
size in the following pages, then match your tire's sidewall markings
to the table with the same sidewall markings. If your tire's sidewall
markings do not match any table listed, please contact your
Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of
change, and Michelin continually updates its product information
to reflect these changes. Printed material may not reflect the latest
load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 20.5”
24R20.5 LRH
PSI
40
45
50
55
60
65
70
75
80
85
kPa
280
310
340
380
410
450
480
520
550
590
SINGLE
17180
18880
20600
22200
23800
25400
26800
28400
30000
31400
S
SINGLE
7820
8480
9140
9980
10620
11440
12040
12840
13420
14200
S
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
15700 LBS at
7100 KG
85 PSI
at 590 kPa
WHEEL DIAMETER - 21”
24R21 LRH
PSI
40
45
50
55
60
65
70
75
80
85
kPa
280
310
340
380
410
450
480
520
550
590
SINGLE
17180
18880
20600
22200
23800
25400
26800
28400
30000
31400
S
SINGLE
7820
8480
9140
9980
10620
11440
12040
12840
13420
14200
S
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
15700 LBS at
7100 KG
85 PSI
at 590 kPa
Truck Tires
WHEEL DIAMETER - 22.5”
9R22.5 LRF
PSI
70
75
80
85
90
95
100
105
kPa
480
520
550
590
620
660
690
720
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
6740
7120
7460
7780
8160
8470
8780
9080
S
4540 LBS at 105 PSI
DUAL
13080
13640
14200
14760
15440
16020
16600
17200
D
4300 LBS at 105 PSI
SINGLE
3060
3230
3380
3520
3700
3840
3980
4120
S
2060 KG
at 720 kPa
DUAL
5920
6200
6440
6680
7000
7280
7560
7800
D
1950 KG
at 720 kPa
10R22.5 LRF
PSI
70
75
80
85
90
95
100
kPa
480
520
550
590
620
660
690
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
8160
8560
8960
9350
9700
10050
10410
S
5205 LBS at 100 PSI
DUAL
15440
16180
16920
17640
18340
19040
19760
D
4940 LBS at 100 PSI
SINGLE
3700
3880
4060
4240
4400
4560
4720
S
2360 KG
at 690 kPa
DUAL
7000
7320
7640
8000
8320
8640
8960
D
2240 KG
at 690 kPa
10R22.5 LRG
PSI
70
75
80
85
90
95
100
105
110
115
kPa
480
520
550
590
620
660
690
720
760
790
SINGLE
8160
8560
8960
9350
9700
10050
10410
10720
11030
11350
S
DUAL
15440
16180
16920
17640
18340
19040
19760
20300
20840
21420
D
5355 LBS at 115 PSI
SINGLE
3700
3880
4060
4240
4400
4560
4720
4860
5000
5150
S
2575 KG
at 790 kPa
DUAL
7000
7320
7640
8000
8320
8640
8960
9200
9440
9720
D
2430 KG
at 790 kPa
LBS
KG
60
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
5675 LBS at 115 PSI
To select the proper load and inflation table, locate your tire
size in the following pages, then match your tire's sidewall markings
to the table with the same sidewall markings. If your tire's sidewall
markings do not match any table listed, please contact your
Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of
change, and Michelin continually updates its product information
to reflect these changes. Printed material may not reflect the latest
load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 22.5”
11R22.5 LRG
PSI
70
75
80
85
90
95
100
105
kPa
480
520
550
590
620
660
690
720
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
9060
9540
9980
10440
11020
11460
11900
12350
S
6175 LBS at 105 PSI
DUAL
17520
18320
19040
19800
20820
21660
22500
23360
D
5840 LBS at 105 PSI
SINGLE
4100
4320
4520
4740
5000
5200
5400
5600
S
2800 KG
at 720 kPa
DUAL
7960
8320
8640
9000
9440
9840
10240
10600
D
2650 KG
at 720 kPa
11R22.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
9530
10030
10530
11030
11510
12000
12470
12950
13420
13880
S
DUAL
17560
18500
19420
20320
21220
22100
22980
23860
24720
25580
D
6395 LBS at 120 PSI
SINGLE
4340
4540
4800
4980
5240
5440
5620
5880
6060
6300
S
3150 KG
at 830 kPa
DUAL
7960
8360
8840
9200
9640
10000
10360
10800
11160
11600
D
2900 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
6940 LBS at 120 PSI
11R22.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
9540
9980
10440
11020
11460
11900
12350
12640
12930
13220
S
DUAL
18320
19040
19800
20820
21660
22500
23360
23580
23800
24020
D
6610 LBS at 120 PSI
6005 LBS at 120 PSI
SINGLE
4320
4520
4740
5000
5200
5400
5600
5740
5880
6000
S
3000 KG
at 830 kPa
DUAL
8320
8640
9000
9440
9840
10240
10600
10720
10840
10900
D
2725 KG
at 830 kPa
12R22.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
10400
10900
11380
12010
12410
12810
13220
13740
14260
14780
S
DUAL
19960
20760
21560
22700
23140
23580
24020
25060
26100
27120
D
6780 LBS at 120 PSI
SINGLE
4720
4940
5160
5450
5640
5820
6000
6240
6480
6700
S
3350 KG
at 830 kPa
DUAL
9040
9400
9760
10300
10520
10720
10900
11360
11840
12300
D
3075 KG
at 830 kPa
KG
7390 LBS at 120 PSI
Truck Tires
LBS
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
12R22.5 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
10750
11320
11880
12440
12990
13540
14080
14600
15140
15660
S
DUAL
19060
20060
21060
22060
23020
24000
24940
25900
26840
27760
D
6940 LBS at 120 PSI
SINGLE
4880
5100
5400
5620
5920
6120
6340
6620
6820
7100
S
3550 KG
at 830 kPa
DUAL
8680
9080
9600
9960
10480
10880
11240
11760
12120
12600
D
3150 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
7830 LBS at 120 PSI
235/80R22.5 LRG
PSI
70
75
80
85
90
95
100
105
110
115
kPa
480
520
550
590
620
660
690
720
760
790
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
6940
7290
7720
7950
8280
8600
8910
9220
9350
S
DUAL
12640
13260
14100
14460
15060
15880
16220
16780
17640
D
4675 LBS at 110 PSI
4410 LBS at 110 PSI
SINGLE
3140
3300
3500
3600
3760
3900
4040
4180
4240
S
2120 KG
at 760 kPa
DUAL
5720
6000
6400
6560
6840
7200
7360
7600
8000
D
2000 KG
at 760 kPa
255/70R22.5 LRH
PSI
80
85
90
95
100
105
110
115
120
kPa
550
590
620
660
690
720
760
790
830
SINGLE
8380
8740
9100
9350
9790
10130
10410
10800
11020
S
DUAL
15880
16440
17100
17640
17820
18440
18700
19660
20280
D
5070 LBS at 120 PSI
SINGLE
3800
3960
4120
4240
4440
4600
4720
4900
5000
S
2500 KG
at 830 kPa
DUAL
7200
7440
7760
8000
8080
8360
8480
8920
9200
D
2300 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
5510 LBS at 120 PSI
61
To select the proper load and inflation table, locate your tire
size in the following pages, then match your tire's sidewall markings
to the table with the same sidewall markings. If your tire's sidewall
markings do not match any table listed, please contact your
Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of
change, and Michelin continually updates its product information
to reflect these changes. Printed material may not reflect the latest
load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 22.5”
255/80R22.5 LRG
PSI
70
75
80
85
90
95
100
105
110
kPa
480
520
550
590
620
660
690
720
760
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
7750
8140
8600
8880
9240
9610
9950
10300
10410
S
DUAL
14100
14820
15440
16160
16820
17640
18100
18740
19220
D
5205 LBS at 110 PSI
4805 LBS at 110 PSI
SINGLE
3520
3700
3900
4020
4200
4360
4520
4680
4720
S
2360 KG
at 760 kPa
DUAL
6400
6720
7000
7320
7640
8000
8200
8520
8720
D
2180 KG
at 760 kPa
275/70R22.5 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
9530
10030
10530
11030
11510
12000
12470
12950
13420
13880
S
DUAL
17560
18500
19420
20320
21220
22100
22980
23860
24720
25580
D
6395 LBS at 120 PSI
SINGLE
4340
4540
4800
4980
5240
5440
5620
5880
6060
6300
S
3150 KG
at 830 kPa
DUAL
7960
8360
8840
9200
9640
10000
10360
10800
11160
11600
D
2900 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
6940 LBS at 120 PSI
275/70R22.5 LRJ
PSI
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
SINGLE
9880
10340
10800
11250
11700
12140
12580
13020
13460
13880
DUAL
19420
20320
21220
22100
22980
23860
24720
25580
SINGLE
4500
4680
4920
5100
5280
5500
5680
5900
DUAL
8840
9200
9640
10000
10360
10800
11160
11600
LBS
KG
6080
6300
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
S
6940 LBS at 130 PSI
D
6395 LBS at 120 PSI
S
3150 KG
at 900 kPa
D
2900 KG
at 830 kPa
275/80R22.5 LRG
PSI
70
75
80
85
90
95
100
105
110
kPa
480
520
550
590
620
660
690
720
760
Truck Tires
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
SINGLE
9000
9450
9880
10310
10740
11020
11560
11960
12350
S
DUAL
16380
17200
18160
18760
19540
20280
21040
21760
22700
D
6175 LBS at 110 PSI
5675 LBS at 110 PSI
SINGLE
4080
4280
4480
4680
4880
5000
5240
5420
5600
S
2800 KG
at 760 kPa
DUAL
7440
7800
8240
8520
8880
9200
9560
9880
10300
D
2575 KG
at 760 kPa
275/80R22.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
9830
10350
10870
11380
11880
12380
12870
13360
13840
14320
S
DUAL
18160
19120
20060
21000
21940
22860
23760
24660
25560
26440
D
6610 LBS at 120 PSI
SINGLE
4480
4680
4940
5140
5420
5600
5800
6060
6240
6500
S
3250 KG
at 830 kPa
DUAL
8240
8640
9120
9520
10000
10360
10720
11200
11520
12000
D
3000 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
7160 LBS at 120 PSI
295/60R22.5 LRJ
PSI
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
SINGLE
10520
11010
11500
11980
12460
12930
13400
13860
14320
14780
S
DUAL
19300
20200
21100
21980
22860
23720
24580
25440
26280
27120
D
6780 LBS at 130 PSI
SINGLE
4780
4980
5220
5420
5600
5860
6040
6280
6460
6700
S
3350 KG
at 900 kPa
DUAL
8760
9120
9600
9960
10280
10760
11080
11520
11880
12300
D
3075 KG
at 900 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
7390 LBS at 130 PSI
295/80R22.5 LRH
PSI
75
80
85
90
95
100
105
110
1150
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
10750
11320
11880
12440
12990
13540
14080
14600
15140
15660
S
DUAL
19060
20060
21060
22060
23020
24000
24940
25900
26840
27760
D
6940 LBS at 120 PSI
SINGLE
4880
5100
5400
5620
5920
6120
6340
6620
6820
7100
S
3550 KG
at 830 kPa
DUAL
8680
9080
9600
9960
10480
10880
11240
11760
12120
12600
D
3150 KG
at 830 kPa
LBS
KG
62
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
7830 LBS at 120 PSI
To select the proper load and inflation table, locate your tire
size in the following pages, then match your tire's sidewall markings
to the table with the same sidewall markings. If your tire's sidewall
markings do not match any table listed, please contact your
Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of
change, and Michelin continually updates its product information
to reflect these changes. Printed material may not reflect the latest
load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 22.5”
305/70R22.5 LRL
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
10750
11320
11880
12440
12990
13540
14080
14600
15140
15660
S
DUAL
19060
20060
21060
22060
23020
24000
24940
25900
26840
27760
D
6940 LBS at 120 PSI
SINGLE
4880
5100
5400
5620
5920
6120
6340
6620
6820
7100
S
3550 KG
at 830 kPa
DUAL
8680
9080
9600
9960
10480
10880
11240
11760
12120
12600
D
3150 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
7830 LBS at 120 PSI
305/85R22.5 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
11680
12200
12700
13220
13660
14140
14780
15140
15660
S
7830 LBS at 120 PSI
DUAL
21420
22200
23120
24020
24860
25740
27120
27680
28640
D
7160 LBS at 120 PSI
SINGLE
5300
5540
5760
6000
6200
6420
6700
6820
7100
S
3550 KG
at 830 kPa
DUAL
9720
10080
10480
10900
11280
11680
12300
12480
13000
D
3250 KG
at 830 kPa
KG
315/80R22.5 LRL (XZU S ONLY)
®
See Page 87 for use on 8.25" Wheel.
PSI
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
SINGLE
14240
14900
15560
16220
16860
17500
18140
18760
19380
20000
S
DUAL
23540
24640
25740
26800
27880
28960
30000
31040
32040
33080
D
8270 LBS at 130 PSI
SINGLE
6460
6740
7080
7340
7580
7920
8180
8500
8740
9070
S
4535 KG
at 900 kPa
DUAL
10680
11120
11720
12120
12560
13120
13520
14040
14480
15000
D
3750 KG
at 900 kPa
LBS
KG
315/80R22.5 LRL
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
10000 LBS at 130 PSI
See Page 87 for use on 8.25" Wheel.
PSI
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
SINGLE
12830
13340
13880
14380
14880
15220
15840
16540
17620
18180
S
DUAL
23360
24280
25580
26180
27080
27760
28840
30440
32040
33080
D
8270 LBS at 130 PSI
SINGLE
5820
6060
6300
6520
6740
6900
7180
7500
7960
8250
S
4125 KG
at 900 kPa
DUAL
10600
11000
11600
11880
12280
12600
13080
13800
14480
15000
D
3750 KG
at 900 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
9090 LBS at 130 PSI
Truck Tires
LBS
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
365/70R22.5 LRL
PSI
80
85
90
95
100
105
110
115
120
125
kPa
550
590
620
660
690
720
760
790
830
860
SINGLE
14700
15420
16140
16860
17560
18260
18960
19640
20400
21000
S
SINGLE
6640
7020
7320
7680
7960
8240
8600
8880
9240
9500
S
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
10500 LBS at 125 PSI
4750 KG
at 860 kPa
385/65R22.5 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
13440
13880
14700
15300
16100
16460
17020
17640
18100
18740
S
9370 LBS at 120 PSI
SINGLE
6120
6300
6700
6940
7300
7480
7700
8000
8200
8500
S
4250 KG
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
at 830 kPa
385/65R22.5 LRL
PSI
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
SINGLE
14120
14780
15440
16080
16720
17360
17980
18600
19220
19840
S
9920 LBS at 130 PSI
SINGLE
6420
6680
7020
7280
7520
7860
8100
8440
8680
9000
S
4500 KG
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
at 900 kPa
63
To select the proper load and inflation table, locate your tire
size in the following pages, then match your tire's sidewall markings
to the table with the same sidewall markings. If your tire's sidewall
markings do not match any table listed, please contact your
Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of
change, and Michelin continually updates its product information
to reflect these changes. Printed material may not reflect the latest
load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 22.5”
425/65R22.5 LRL
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
15980
16540
17480
18200
18740
19580
20200
21000
21800
22800
S
SINGLE
7280
7500
7960
8260
8500
8880
9160
9500
9890
10300
S
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
11400 LBS at 120 PSI
5150 KG
at 830 kPa
445/50R22.5 LRL (X One Tires)
®
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
14000
14740
15480
16200
16920
17640
18340
19020
19720
20400
S
SINGLE
6360
6660
7040
7320
7700
7980
8260
8620
8900
9250
S
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
10200 LBS at 120 PSI
4625 KG
at 830 kPa
445/65R22.5 LRL
PSI
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
SINGLE
18220
19080
19920
20800
21600
22400
23200
24000
24800
25600
S
SINGLE
8280
8600
9060
9380
9700
10140
10460
10880
11180
11600
S
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
12800 LBS at 130 PSI
5800 KG
at 900 kPa
445/65R22.5 LRL
Truck Tires
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
17320
18180
18960
19740
20400
21200
22000
22800
23400
24600
S
SINGLE
7900
8250
8640
8940
9250
9640
9920
10300
10580
11200
S
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
12300 LBS at 120 PSI
5600 KG
at 830 kPa
455/55R22.5 LRL (X One Tires)
®
PSI
80
85
90
95
100
105
110
115
120
125
kPa
550
590
620
660
690
720
760
790
830
860
SINGLE
15400
16160
16920
17660
18400
19140
19860
20600
21200
22000
S
SINGLE
7000
7400
7700
8100
8380
8680
9060
9340
9720
10000
S
LBS
KG
455/55R22.5 LRM (X One Tires)
®
85
90
95
100
105
110
115
120
125
130
kPa
590
620
660
690
720
760
790
830
860
900
SINGLE
16660
17440
18200
18960
19720
20400
21200
22000
22600
23400
S
SINGLE
7560
7860
8280
8580
8860
9260
9560
9940
10220
10600
S
KG
11000 LBS at 125 PSI
5000 KG
at 860 kPa
See Page 87 for use on 13.00x22.5" Wheel.
PSI
LBS
64
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
11700 LBS at 130 PSI
5300 KG
at 900 kPa
To select the proper load and inflation table, locate your tire
size in the following pages, then match your tire's sidewall markings
to the table with the same sidewall markings. If your tire's sidewall
markings do not match any table listed, please contact your
Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of
change, and Michelin continually updates its product information
to reflect these changes. Printed material may not reflect the latest
load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 24”
12.00R24 LRH
PSI
70
75
80
85
90
95
100
105
110
kPa
480
520
550
590
620
660
690
720
760
SINGLE
12660
13320
13960
14560
15160
16100
16620
17140
17640
S
DUAL
24480
25560
26600
27640
28640
29560
30440
31320
32200
D
8050 LBS at 110 PSI
SINGLE
5740
6040
6340
6600
6880
7300
7540
7780
8000
S
4000 KG
at 760 kPa
DUAL
11120
11440
12080
12560
13000
13400
13800
14200
14600
D
3650 KG
at 760 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
8820 LBS at 110 PSI
12.00R24 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
13320
13960
14560
15160
16100
16620
17140
17640
18200
18740
S
DUAL
25560
26600
27640
28640
29560
30440
31320
32200
33200
34160
D
8540 LBS at 120 PSI
SINGLE
6040
6340
6600
6880
7300
7540
7780
8000
8260
8500
S
4250 KG
at 830 kPa
DUAL
11440
12080
12560
13000
13400
13800
14200
14600
15040
15500
D
3875 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
9370 LBS at 120 PSI
WHEEL DIAMETER - 24.5”
11R24.5 LRG
PSI
70
75
80
85
90
95
100
105
kPa
480
520
550
590
620
660
690
720
SINGLE
9640
10140
10620
11100
11680
12190
12700
13220
S
6610 LBS at 105 PSI
DUAL
18640
19480
20280
21040
22040
22700
23360
24020
D
6005 LBS at 105 PSI
SINGLE
4380
4600
4820
5040
5300
5540
5780
6000
S
3000 KG
at 720 kPa
DUAL
8440
8840
9200
9560
10000
10320
10640
10900
D
2725 KG
at 720 kPa
KG
Truck Tires
LBS
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
11R24.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
10140
10620
11100
11680
12190
12700
13220
13580
13940
14320
S
DUAL
19480
20280
21040
22040
22700
23360
24020
24820
25620
26440
D
6610 LBS at 120 PSI
SINGLE
4600
4820
5040
5300
5540
5780
6000
6160
6320
6500
S
3250 KG
at 830 kPa
DUAL
8840
9200
9560
10000
10320
10640
10900
11280
11640
12000
D
3000 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
7160 LBS at 120 PSI
12R24.5 LRH
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
11040
11580
12080
12790
13300
13820
14320
14760
15200
15660
S
DUAL
21200
22080
22920
23360
24380
25400
26440
27160
27880
28640
D
7160 LBS at 120 PSI
SINGLE
5000
5260
5480
5800
6040
6280
6500
6700
6900
7100
S
3550 KG
at 830 kPa
DUAL
9600
10000
10400
10600
11080
11560
12000
12320
12640
13000
D
3250 KG
at 830 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
7830 LBS at 120 PSI
275/80R24.5 LRG
PSI
70
75
80
85
90
95
100
105
110
kPa
480
520
550
590
620
660
690
720
760
SINGLE
9090
9540
9880
10420
10840
11350
11670
12080
12350
S
DUAL
16540
17360
18160
18960
19720
20820
21240
21980
22700
D
5675 LBS at 110 PSI
SINGLE
4120
4320
4480
4720
4920
5150
5300
5480
5600
S
2800 KG
at 760 kPa
DUAL
7480
7880
8240
8600
8960
9440
9640
9960
10300
D
2575 KG
at 760 kPa
LBS
KG
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
6175 LBS at 110 PSI
65
To select the proper load and inflation table, locate your tire
size in the following pages, then match your tire's sidewall markings
to the table with the same sidewall markings. If your tire's sidewall
markings do not match any table listed, please contact your
Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of
change, and Michelin continually updates its product information
to reflect these changes. Printed material may not reflect the latest
load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s
maximum air pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
WHEEL DIAMETER - 24.5”
305/75R24.5 LRJ
PSI
75
80
85
90
95
100
105
110
115
120
kPa
520
550
590
620
660
690
720
760
790
830
SINGLE
11360
11960
12550
13140
13720
14300
14860
15420
15980
16540
S
DUAL
19660
20700
21740
22760
23760
24760
25740
26720
27680
28640
D
7160 LBS at 120 PSI
SINGLE
5160
5400
5700
5940
6240
6460
6700
6980
7200
7500
S
3750 KG
at 830 kPa
DUAL
8960
9360
9880
10280
10840
11200
11600
12120
12480
13000
D
3250 KG
at 830 kPa
LBS
KG
Truck Tires
66
MAXIMUM LOAD
AND PRESSURE ON SIDEWALL
8270 LBS at 120 PSI
Retread Products
Retread
Products
67
MICHELIN RETREADS QUICK REFERENCE TREAD GUIDE
®
Product Availability
Standard Sizes
Tread Size
140
150
Size \ DIE
Spread Axle Sizes
160
170
180
190
162 \ 4
168 \ 5
177 \ 6
194 \ 7
185
(Tread Depth in Shaded Boxes)
200
210
220
203 \ 8 211\ 8.5N 219 \ 9 225 \ 9.5
195
205
215
XDA2 23 AT*
®
23
23
23
230
19
19
19
XDA + AT*
23
23
23
23
XDA-HT
28
28
28
28
XD4
28
28
28
28
26
26
26
™
®
XDN
17
®
XDHT
XDA
®
19
(1)
23
23
23
23
23
XDC LL
14
23
14
XDC 22
22
22
22
22
22
XDC 18
18
18
18
18
18
21
21
®
®
XM+S4
®
XDE M/S
®
21
21
21
21
21
21
18
18
18
20
20
22
XDS
®
22
22
25
25
XDU S
®
XDY
26
®
XDY-1
™
XZE
®
13
(1)
13
13
(1)
26
26
26
26
30
30
30
30
13
13
15
15
15
15
15
16
18
18
18
18
18
18
18
18
18
XZE SA
®
18
18
26
25
32
26
32
30
32
32
30
26
26
18
18
18
18
18
20
XZY-1
20
20
20
20
20
26
XZY-2
26
26
26
26
®
™
™
XT-1 AT* (1)
®
XTA -1 (1)
11
®
26
12
12
12
12
11
11
11
11
XTA
16
®
Retread Products
XTY SA
22
®
For up-to-date product information please visit www.michelintruck.com
*“AT” designated Advanced Technology compounds for fuel saving.
(1) Available siped. Consult Michelin Retread Technologies dealers for availability.
Wide Base and X One Sizes
®
Tread Size
290
XTE2 Wide Base
20
XZA Wide Base
19
®
®
320
350
19
19
XZH Wide Base
XZY Wide Base
X One XDA
®
20
20
X One XTA
13
X One XTE
™
16
®
390
24
24
20
®
®
®
380
20
™
®
375
22
32
18
XZU S
XZY
26
20
®
68
25
25
®
XZA
270
28
®
®
260
23
19
®
250
232 \ 10 238 \ 10.5 252 \ 12
225
XDA2 19 AT*
®
240
26
16
CUSTOM MOLD TREAD GUIDE
™
SIZE
XDA2 AT
XD4
XDN
XDHT
XDS
XZA
XZE
XT-1 AT
XTA -1
XZY WIDE BASE
X One XTA
X One XTE
®
®
®
®
®
®
®
®
®
®
®
®
™
11R22.5
11R24.5
275/80R22.5
275/80R24.5
425/65R22.5
445/50R22.5
23
NA
25
23
25
15
18
12
11
NA
NA
NA
23
NA
NA
23
25
15
18
12
11
NA
NA
NA
23
NA
NA
23
NA
15
18
12
11
NA
NA
NA
23
28
NA
23
NA
15
18
12
11
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
20
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
13
16
Please contact your local MRTI locations for size and tread design availability.
CASING FITMENT GUIDE
THIS DOCUMENT IS DESIGNED FOR USE AS A SALES TOOL ONLY AND SHOULD NOT BE USED AS OR CONSIDERED TO BE A TECHNICAL RECOMMENDATION.
MRTI shop will use the normal MRTI production processes to determine the final tread size needed for each individual tire. This publication should be
used as a general guide during the sales process to help select the MRTI tread width that could optimally be used for a particular casing size.
150
152
160
162
170
168
180
177
190
194
200
203
210
211
Standard
7.50R16
7.50R17
9R17.5
8R19.5
9R22.5
7.50R16
7.50R17
9R17.5
8R19.5
9R22.5
7.50R16
8.75R16.5
9R17.5
8R19.5
8.75R16.5
9R17.5
10R17.5
8R19.5
8.25R20
9R22.5
10R22.5
11R22.5
8.75R16.5
10R17.5
11R17.5
8R19.5
8.25R20
9R22.5
10R22.5
11R17.5
9.00R20
10.00R20
9R22.5
10R22.5
11R17.5
9.00R20
10.00R20
10R22.5
11R22.5
Low Profile
215/85R16
215/85R16
215/85R16
225/70R19.5
245/70R19.5
265/70R19.5
255/70R22.5
235/80R22.5
255/80R22.5
225/70R19.5
245/70R19.5
265/70R19.5
255/70R22.5
235/80R22.5
255/80R22.5
215/85R16 215/85R16
215/75R17.5 225/75R16
215/75R17.5
225/70R19.5
219
225
230
232
10.00R20
10.00R22
11R22.5
11R24.5
12R24.5
10.00R20
11.00R20
11R22.5
12R22.5
11.00R24
12.00R24
11R24.5
12R24.5
10.00R20
10.00R22
11R22.5
12R22.5
11.00R24
12.00R24
11R24.5
12R24.5
12.00R20
11.00R22
11R22.5
12R22.5
11.00R24
12.00R24
11R24.5
12R24.5
245/70R19.5
265/70R19.5
255/70R22.5
255/80R22.5
275/80R22.5
275/80R24.5
285/70R19.5
275/80R22.5
295/80R22.5
275/80R24.5
Tread Width
240
250
260
270
290
320
350
375
238
252
SIZE 15
SIZE 16.5
SIZE 18
Standard
11.00R20
13.00R20
15R22.5
16.5R19.5
18R19.5
12.00R20
14.00R20
15R22.5
18R22.5
11.00R22
12.00R24
16.5R22.5
11R22.5
12R22.5
12/80R22.5
11.00R24
12.00R24
11R24.5
12R24.5
Low Profile
275/80R22.5 335/80R20 315/80R22.5 315/80R22.5 365/80R20
365/80R20 445/65R22.5 445/50R22.5
295/80R22.5 365/80R20 305/75R24.5 305/75R24.5 385/65R22.5 385/65R22.5 445/65R19.5
305/70R22.5 305/70R22.5
425/65R22.5
315/80R22.5 315/80R22.5
275/80R24.5
220
380
285/70R19.5 275/80R22.5
275/80R22.5 315/80R22.5
295/80R22.5 275/80R24.5
315/80R22.5
275/80R24.5
385
390
Retread Products
Tread Width
140
445/50R22.5
455/55R22.5 455/55R22.5
69
BUFFING SPECS
SCULP
SIZE
X One XDA
X One XDA-HT
X One XTA
X One XTE
445/50R22.5
445/50R22.5
445/50R22.5
445/50R22.5
455/55R22.5 7.5R17
285/70R19.5
255/70R22.5
11R22.5
275/80R22.5
275/80R24.5
275/80R22.5
11R22.5
11R24.5
11R22.5
275/80R22.5
275/80R24.5
11R22.5
12R22.5
11R24.5
225/70R19.5
225/70R19.5
245/70R19.5
10R22.5
10R22.5
11R22.5
235/80R22.5
255/80R22.5
275/80R22.5
9R22.5
11R22.5 215/75R17.5
265/70R19.5
285/70R19.5
11R22.5
275/80R22.5
11R24.5
275/80R24.5
12.00R24
315/80R22.5
11R22.5
11R22.5
12R22.5
275/80R22.5
11R22.5
12R22.5
11R22.5
11R22.5
315/80R22.5
11R22.5
225/70R19.5
245/70R19.5
235/80R22.5
255/80R22.5
11R22.5
275/80R22.5
11R24.5
275/80R24.5
10.00R15
7.50R15
8.25R15
215/75R17.5
275/80R22.5
245/70R17.5
11R22.5
275/80R22.5
11R24.5
275/80R24.5
XCA
XD2
XD4
XDA ENERGY
XDA3
XDA-HT
XDE A/T
XDE M/S
XDE1
XDE2+
XDHT
XDL
XDN GRIP
XDN2
XDS
Retread Products
XDY 3
XDY-2
XRV
XT-1
XTA
XTA ENERGY
XTA2 ENERGY
XTE
70
LR BUFF RADIUS BUFF WIDTH OPT BUFF
mm
mm
WIDTH
L
2000
380
L
2000
380
L
2000
380
L
2000
380
L
2000
390
D
300
140
H
750
225
219
H
850
211
203
G
675
230
225
G
675
230
225
G
675
230
225
G
675
230
225
G
675
230
225
G
675
230
225
G
675
230
225
G
675
230
225
G
675
230
225
H
675
230
225
H
675
230
225
H
600
224
219
F
500
194
177
G
500
194
177
H
1000
212
203
F
675
203
194
G
675
203
194
G
675
230
225
G
550
194
177
G
600
203
194
G
675
230
225
F
550
168
152
H
675
230
225
F
525
177
168
G
550
194
177
H
750
225
219
G
675
230
225
G
675
230
225
G
675
230
225
G
675
230
225
J
675
225
219
L
700
G
675
230
225
H
675
230
225
H
675
252
250
G
675
230
225
H
675
230
225
H
675
230
225
H
675
230
225
G
675
230
225
L
700
H
675
230
225
F
500
194
177
F
450
193
177
G
550
194
177
G
600
203
194
G
675
230
225
G
675
230
225
G
675
230
225
G
675
230
225
J
450
177
168
H
450
152
140
H
450
152
140
J
525
177
168
G
675
230
225
J
650
203
194
G
675
230
225
G
675
230
225
G
675
230
225
G
675
230
225
SCULP
SIZE
XTE2
XTE2 (Wide Base)
285/70R19.5
385/65R22.5
425/65R22.5
445/65R22.5
275/70R22.5
12R22.5
10R17.5
8R19.5
305/70R19.5
11R22.5
11R22.5
275/80R22.5
275/80R22.5
11R24.5
275/80R24.5
315/80R22.5
11R22.5
275/80R22.5
11R24.5
275/80R24.5
11R22.5
275/80R22.5
11R24.5
275/80R24.5
275/70R22.5
295/80R22.5
315/80R22.5
G20 (14.00R20)
225/70R19.5
225/70R19.5
245/70R19.5
245/70R19.5
9R22.5
10R22.5
10R22.5
11R22.5
11R22.5 12R22.5 235/80R22.5
255/80R22.5
255/70R22.5 275/80R22.5
11R24.5
11R24.5 275/80R24.5
215/75R17.5
9.00R20
10.00R20
11.00R20
12.00R20
265/70R19.5
285/70R19.5
275/70R22.5
295/80R22.5
425/65R22.5
445/65R22.5
12.00R24
12R22.5
385/65R22.5
425/65R22.5
445/65R22.5
11R22.5
11R24.5
XTY2
XZ2
XZA
XZA3
XZA1
XZA-1
XZA-1B
XZA2
XZA2 Energy
XZA4
XZE
XZE1
XZE2
XZE2+
XZL (Wide Base)
XZY
XZY 3
XZY 3 (Wide Base)
XZY-2
LR BUFF RADIUS BUFF WIDTH OPT BUFF
mm
mm
WIDTH
J
750
225
219
L
1300
286
L
1300
318
290
L
1200
340
320
J
850
225
219
H
675
230
225
G
500
168
152
F
300
152
140
J
950
238
232
G
675
230
225
H
675
230
225
G
675
230
225
H
675
230
225
G
675
230
225
G
675
230
225
L
700
240
238
G
675
230
225
G
675
230
225
G
675
230
225
G
600
218
211
G
675
230
225
G
675
230
225
G
675
230
225
G
675
230
225
J
850
225
219
H
675
225
219
L
700
M
675
273
G
500
194
177
F
500
194
177
F
600
210
203
H
1000
211
203
F
550
168
152
G
675
203
194
F
675
203
194
G
675
230
225
H
675
230
225
H
675
230
225
G
550
194
177
G
600
203
194
H
850
211
194
G
675
230
225
G
675
230
225
H
675
230
225
G
675
230
225
F
525
177
168
G
600
177
168
H
600
219
216
H
600
219
216
J
675
230
225
G
550
194
177
H
750
225
219
J
850
225
219
H
675
225
219
L
1300
318
290
L
1200
365
320
J
675
225
219
H
675
230
225
J
1300
286
L
1300
318
290
L
1200
340
320
H
675
230
225
H
675
230
225
With chip and cut resistant tread compound.
RETREAD TREAD DESIGN
DRIVE POSITION
XDA2 19 Pre-Mold Retread
XDA2 23 Pre-Mold Retread
™
®
™
XDA2 19 Pre-Mold Retread Data
XDA2 23 Pre-Mold Retread Data
™
®
™
Width
XDA2 19
Tread Depth
203 \ 8.0
19/32"
—
211 \ 8.5
19/32"
23/32"
®
219 \ 9.0
19/32"
23/32"
®
225 \ 9.5
19/32"
23/32"
232 \ 10.0
—
23/32"
• Fuel-efficient Advanced Technology compound
• No compromise performance
• Modified tread block design optimized for long,
even wear
• XDA2 19 - 19/32nds tread depth and
XDA2 23 - 23/32nds tread depth
• XDA2 23 - also available as a Custom Mold retread
®
™
LH
R
O/O
U
XDA + AT Pre-Mold Retread
®
•
•
•
•
®
™
XDA + Pre-Mold Retread Data
®
Fuel-efficient Advanced Technology compound
No compromise performance
Block design for long mileage and even wear
23/32nds tread depth
LH
XDA-HT
R
O/O
™
High Torque
R
O/O
™
23/32"
219 \ 9.0
23/32"
225 \ 9.5
23/32"
™
Width
Tread Depth
200 mm
28/32"
210 mm
28/32"
220 mm
28/32"
230 mm
28/32"
240 mm
28/32"
®
™
LH
R
O/O
™
Width
Tread Depth
203 \ 8.0
28/32"
210
28/32"
220
28/32"
230
28/32"
U
XDN Pre-Mold Retread
™
XDN Pre-Mold Retread Data
®
LH
R
O/O
™
Width
Tread Depth
180 mm
17/32"
210 mm
26/32"
220 mm
26/32"
230 mm
26/32"
250 mm
25/32"
U
XDHT Pre-Mold Retread
®
211 \ 8.5
XD4 Pre-Mold Retread Data
• Extra deep tread design optimized for high torque
applications e.g. 4x2’s
• Open shoulder design helps deliver exceptional traction
• 28/32nds tread depth
• Unique scrub resistant compound
• Also available as a Custom Mold retread.
™
23/32"
U
XD4 Pre-Mold Retread
• Excellent traction levels in snow and ice conditions
• Sipes and lateral inter-locking grooves for rain and snow
evacuation
• Excellent mileage
• Square shoulder for stability
• 17/32nds or 26/32nds tread depth - depending on
tread width
• Also available as a Custom Mold retread
Tread Depth
™
LH
®
Width
203 \ 8.0
XDA-HT Pre-Mold Retread Data
• Unique two compound design to help deliver long
mileage and to help minimize internal casing
temperatures
• Solid shoulder design optimized for long, smooth wear
• Open lug design helps provide excellent traction in
adverse conditions
• 28/32nds tread depth
®
™
U
Pre-Mold Retread
™
XDA2 23
Tread Depth
Retread Products
®
™
XDHT Pre-Mold Retread Data
®
• Solid shoulder design optimized for high scrub
applications
• Block design optimized for high torque applications
• 19/32nds or 23/32nds tread depth - depending on
tread width
• Available siped
• Also available as a Custom Mold retread
™
LH
R
O/O
U
™
Width
Tread Depth
180 mm
194 \ 7.0
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
232 \ 10.0
19/32"
23/32"
23/32"
23/32"
23/32"
23/32"
23/32"
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
71
RETREAD TREAD DESIGN
DRIVE POSITION
Recamic XDA Pre-Mold Retread
®
•
•
•
•
®
™
Recamic XDA Pre-Mold
Retread Data
®
Square shoulder for stability
Slow, even wear
Excellent mileage
25/32nds tread depth
LH
R
O/O
™
®
®
®
LH
R
O/O
U
XDC LL Pre-Mold Retread
®
Width
Tread Depth
240 mm
25/32"
XDC 18 Pre-Mold Retread Data
XDC 22 Pre-Mold Retread Data
™
• Open shoulder design optimized for exceptional traction
• Solid center rib promotes long, even wear
• Classic drive axle design helps deliver excellent wear
and traction
• XDC 18 – 18/32nds tread depth and
XDC 22 – 22/32nds tread depth
™
®
™
®
™
Width
XDC 18
Tread Depth
XDC 22
Tread Depth
194 \ 7.0
18/32"
22/32"
203 \ 8.0
18/32"
22/32"
211 \ 8.5
18/32"
22/32"
219 \ 9.0
18/32"
22/32"
225 \ 9.5
18/32"
22/32"
XDC LL Pre-Mold Retread Data
®
• Designed for trade-in vehicles
• Meets truck manufacturers trade-in requirements
LH
R
O/O
Tread Depth
210
220
14/32"
14/32"
XM+S4 Pre-Mold Retread Data
®
LH
R
O/O
U
XDE M/S Pre-Mold Retread
™
®
Width
Tread Depth
162 \ 4.0
168 \ 5.0
177 \ 6.0
194 \ 7.0
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
21/32"
21/32"
21/32"
21/32"
21/32"
21/32"
21/32"
21/32"
®
Retread Products
• Open shoulder tread design optimized to help deliver
high traction while providing excellent treadwear
• Offset shoulder blocks help provide added traction in
mud and soft soil conditions
• 18/32nds, 20/32nds, 22/32nds, or 26/32nds tread depth
depending on tread width
R
O/O
™
Width
Tread Depth
Width
Tread Depth
160 mm
18/32"
210 mm
22/32"
170 mm
18/32"
220 mm
22/32"
180 mm
18/32"
230 mm
22/32"
190 mm
20/32"
240 mm
26/32"
200 mm
20/32"
250 mm
26/32"
U
XDS Pre-Mold Retread
™
XDS Pre-Mold Retread Data
®
• Unique Michelin compounding and tread siping to help
deliver outstanding traction in severe snow conditions
• Extensive full-width sipes and lateral grooves for
effective rain and snow evacuation
• Directional tread optimized for traction
• Also available as a Custom Mold retread
• 25/32nds tread depth
™
LH
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
™
XDE M/S Pre-Mold Retread Data
LH
72
Width
™
• Standard highway compound
• Open lug tread design promotes self-cleaning of lugs
and helps maximize mud and snow traction
• Chevron block design for high traction and low noise
• 21/32nds tread depth
®
™
U
XM+S4 Pre-Mold Retread
®
™
U
XDC 18 Pre-Mold Retread
XDC 22 Pre-Mold Retread
®
®
R
O/O
U
™
Width
Tread Depth
220 mm
25/32"
230 mm
25/32"
250 mm
25/32"
RETREAD TREAD DESIGN
DRIVE POSITION
XDU S Pre-Mold Retread
®
™
• More rubber mass to aid in scrub resistance
• Exclusive, unique two-layer compound designed to minimize
internal casing temperatures for long tread and casing life
• Proprietary compound specifically formulated for
demanding, high scrub operations
• Lug design optimized for high scrub, high traction
operations
• 32/32nds tread depth
XDU S Pre-Mold Retread Data
®
LH
R
O/O
™
32/32"
250 mm
32/32"
270 mm
32/32"
®
LH
R
O/O
U
XDY-1 Pre-Mold Retread
•
•
•
•
Tread Depth
XDY Pre-Mold Retread Data
• Compound for chip and cut resistance
• Deep tread for traction and mileage
• 26/32nds or 32/32nds tread depth depending on
tread width
™
Width
240 mm
U
XDY Pre-Mold Retread
®
™
™
™
Width
Tread Depth
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
232 \ 10.0
238 \ 10.5
240 mm
252 \ 12.0
26/32"
26/32"
26/32"
26/32"
26/32"
26/32"
32/32"
32/32"
XDY-1 Pre-Mold Retread Data
™
Compound for chip and cut resistance
Directional tread optimized for traction
Extra deep tread for extra protection and mileage
30/32nds tread depth
R
O/O
U
Width
Tread Depth
211 \ 8.5
30/32"
219 \ 9.0
30/32"
225 \ 9.5
30/32"
232 \ 10.0
30/32"
238 \ 10.5
30/32"
250 mm
30/32"
Retread Products
LH
™
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
73
RETREAD TREAD DESIGN
ALL-WHEEL POSITION
XZA Pre-Mold Retread
®
•
•
•
•
•
™
XZA Pre-Mold Retread Data
®
Solid shoulder to help withstand scrub and abrasion
Designed for long mileage and even wear
Available siped
Also available as a Custom Mold retread
13/32nds or 15/32nds tread depth depending on
tread width
Width
™
LH
R
O/O
U
Recamic XZA Pre-Mold Retread
®
®
™
R
O/O
™
R
O/O
™
Solid shoulders to help withstand scrub and abrasion
Deep siping for optimized traction
Deep tread depth designed for long mileage
Available siped
Also available as a Custom Mold retread
16/32nds or 18/32nds tread depth depending on
tread width
™
R
O/O
U
XZU S Pre-Mold Retread
™
160 mm
13/32"
211 \ 8.5
15/32"
170 mm
13/32"
219 \ 9.0
15/32"
180 mm
13/32"
225 \ 9.5
15/32"
®
Width
Tread Depth
240 mm
20/32"
™
™
Width
Tread Depth
185 mm
18/32"
195 mm
18/32"
205 mm
18/32"
215 mm
18/32"
225 mm
18/32"
™
Width
Tread Depth
168 \ 5.0
177 \ 6.0
194 \ 7.0
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
16/32"
18/32"
18/32"
18/32"
18/32"
18/32"
18/32"
Retread Products
XZU S Pre-Mold Retread Data
®
LH
R
O/O
™
Width
Tread Depth
240 mm
26/32"
250 mm
26/32"
270 mm
26/32"
U
™
XZY Pre-Mold Retread Data
®
Compound for chip and cut resistance
Rib design optimized for quiet running and even wear
All wheel position capable
Shoulder scallops help provide additional traction
18/32nds or 20/32nds tread depth depending on
tread width
LH
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
15/32"
®
XZY Pre-Mold Retread
74
203 \ 8.0
XZE Pre-Mold Retread Data
LH
•
•
•
•
•
13/32"
U
XZE Pre-Mold Retread
®
150 mm
®
LH
• More rubber mass to aid in scrub resistance
• Exclusive, unique two-layer compound designed to
minimize internal casing temperatures for long tread
and casing life
• Proprietary compound specifically formulated for
demanding, high scrub operations
• Rib design optimized for high scrub, medium traction
operations
• 26/32nds tread depth
15/32"
XZE SA Pre-Mold Retread Data
• Rounded shoulders to help minimize scrub effects
typical of spread axle applications
• Tapered tread extensions to help withstand shifting
footprint stress typical of spread axle applications
while helping to maintain casing durability
• 18/32nds tread depth
®
Tread Depth
194 \ 7.0
U
XZE SA Pre-Mold Retread
•
•
•
•
•
•
Width
13/32"
®
LH
®
Tread Depth
140 mm
Recamic XZA Pre-Mold
Retread Data
• Excellent mileage
• Smooth, even wear
• 20/32nds tread depth
®
™
R
O/O
U
™
Width
Tread Depth
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
232 \ 10.0
238 \ 10.5
250 mm
18/32"
18/32"
18/32"
18/32"
18/32"
18/32"
20/32"
RETREAD TREAD DESIGN
ALL-WHEEL POSITION
XZY-1 Pre-Mold Retread
™
•
•
•
•
™
XZY-1 Pre-Mold Retread Data
™
Compound for chip and cut resistance
Square shoulder helps increase ground contact
All-wheel-position capable
20/32nds or 26/32nds tread depth depending on tread
width
LH
R
O/O
U
XZY-2 Pre-Mold Retread
™
™
™
Width
Tread Depth
211 \ 8.5
20/32"
219 \ 9.0
20/32"
225 \ 9.5
20/32"
232 \ 10.0
20/32"
238 \ 10.5
20/32"
252 \ 12.0
26/32"
XZY-2 Pre-Mold Retread Data
™
• Compound for chip and cut resistance
• Square buttressed shoulder helps provide impact
protection from road hazards
• Zig zag tread grooves and shoulder traction scallops
help enhance traction in virtually all weather
conditions
• 26/32nds tread depth
LH
R
O/O
™
Width
Tread Depth
210 mm
26/32"
220 mm
26/32"
230 mm
26/32"
240 mm
26/32"
250 mm
26/32"
U
TRAILER POSITION
XT-1 AT Pre-Mold Retread
•
•
•
•
•
™
XT-1 AT Pre-Mold Retread Data
®
Fuel efficient Advanced Technology compound
No Compromise performance
12/32nds tread depth
Available siped
Also available as a Custom Mold retread
™
LH
R
O/O
•
•
•
•
•
™
LH
R
O/O
U
Recamic XTA Pre-Mold Retread
™
219 \ 9.0
12/32"
225 \ 9.5
12/32"
™
Width
Tread Depth
194 \ 7.0
11/32"
203 \ 8.0
11/32"
211 \ 8.5
11/32"
219 \ 9.0
11/32"
225 \ 9.5
11/32"
®
LH
R
O/O
®
™
Width
Tread Depth
240 mm
16/32"
260 mm
16/32"
U
XTY SA Pre-Mold Retread
™
• Application specific compound for chip and cut resistance
• Tapered tread extensions to help withstand shifting
footprint stress typical of spread axle and multi-axle
applications
• Aggressive tread design for demanding regional and
on/off road trailer operations
• 22/32nds tread depth
12/32"
Recamic XTA Pre-Mold
Retread Data
• Excellent stability
• Good resistance in high scrub operations
• 16/32nds tread depth
®
12/32"
211 \ 8.5
®
™
®
203 \ 8.0
XTA -1 Pre-Mold Retread Data
Solid shoulder to withstand most scrub and abrasion
No compromise performance
11/32nds tread depth
Available siped
Also available as a Custom Mold retread
®
Tread Depth
U
XTA -1 Pre-Mold Retread
®
™
Width
Retread Products
®
XTY SA Pre-Mold Retread Data
®
LH
R
O/O
™
Width
Tread Depth
205 mm
22/32"
215 mm
22/32"
U
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
75
RETREAD TREAD DESIGN
WIDE BASE RETREADS
XTE2
®
Pre-Mold Retread
™
WIDE BASE
XTE2 WIDE BASE Pre-Mold Retread Data
®
• Wide grooves help provide exceptional water evacuation
• Wide shoulder rib to help resist scrub and abrasion
• Tapered tread extensions to help withstand shifting
footprint stress typical of wide base service
• 20/32nds tread depth
LH
XZH
™
R
O/O
Pre-Mold Retread
R
O/O
Pre-Mold Retread
R
O/O
Pre-Mold Retread
20/32"
™
Width
Tread Depth
290 mm
20/32"
320 mm
20/32"
350 mm
20/32"
®
LH
Retread Products
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
Tread Depth
XZA WIDE BASE Pre-Mold Retread Data
• Wide shoulder rib to help withstand scrub and abrasion
• Tapered tread extensions to help withstand shifting
footprint stress typical of wide base service
• 19/32nds tread depth
76
Width
U
™
WIDE BASE
™
350 mm
®
LH
®
Pre-Mold Retread Data
XZY WIDE BASE Pre-Mold Retread Data
• Compound for abrasion-resistance to promote long
casing and tread life
• Tapered tread extensions to help withstand shifting
footprint stress typical of wide base service
• 20/32nds tread depth
XZA
WIDE BASE
U
™
WIDE BASE
20/32"
™
LH
®
Tread Depth
XZH
• Compound for abrasion-resistance
• Self-cleaning lugs, open shoulder design for exceptional
traction and excellent floatation
• Tapered tread extensions to help withstand shifting
footprint stress typical of wide base service
• 20/32nds tread depth
XZY
Width
290 mm
U
™
WIDE BASE
™
R
O/O
U
™
Width
Tread Depth
290 mm
19/32"
320 mm
19/32"
350 mm
19/32"
RETREAD TREAD DESIGN
X ONE RETREADS
X One XDA Pre-Mold Retread
®
®
™
X One XDA
Pre-Mold Retread Data
®
• Fuel-efficient Advanced Technology compound
• Deep tread depth offering long original tread life and
excellent all-weather traction
• 24/32nds tread depth
LH
R
O/O
®
™
24/32"
390 mm
24/32"
®
®
™
LH
R
O/O
Width
Tread Depth
375 mm
13/32"
U
X One XTE Pre-Mold Retread
™
Tread Depth
X One XTA
Pre-Mold Retread Data
• Tread design optimized to promote stability and
resistance to uneven wear
• Fuel-efficient Advanced Technology compound
• Tapered tread extensions to help withstand the stress
of long haul trailer use
• 13/32 tread depth
®
Width
380 mm
U
X One XTA Pre-Mold Retread
®
®
™
™
X One XTE
Pre-Mold Retread Data
®
™
™
• Tread design optimized to promote stability and
resistance to uneven wear
• Compound for scrub resistance for high scrub regional
trailer operations
• 16/32nds tread depth
R
O/O
Tread Depth
375 mm
16/32"
U
Retread Products
LH
Width
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
77
RETREAD TREAD DESIGN
X ONE RETREADS - CAP AND CASING
X One XDA Pre-Mold Retread
®
®
™
X One XDA
Pre-Mold Retread Data
®
®
™
• Fuel-efficient Advanced Technology compound
• Deep tread depth offering long original tread life and
excellent all-weather traction
• 24/32nds tread depth
LH
R
O/O
®
Tread Depth
445/50R22.5
24/32"
455/55R22.5
24/32”
U
X One XTA Custom Mold Retread
®
Casing Size
™
X One XTA
Custom Mold Retread Data
®
®
™
• Tread design optimized for stability and resistance
to uneven wear
• Available exclusively as a Custom Mold retread
• 13/32nds tread depth
™
LH
R
O/O
™
Tread Depth
445/50R22.5
13/32"
U
X One XTE Custom Mold Retread
®
Casing Size
™
X One XTE
Custom Mold Retread Data
®
™
™
• Tread design optimized to promote stability and
resistance to uneven wear
• Available exclusively as a Custom Mold retread
• 16/32nds tread depth
™
LH
Retread Products
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
78
R
O/O
U
Casing Size
Tread Depth
445/50R22.5
16/32"
Appendix
Appendix
79
TUBES, FLAPS AND VALVES
FLAP REPLACEMENT
Michelin is transitioning to a new type of flap that will replace the L/LB type flaps. These improved flaps,
illustrated below, are stronger, more durable and help resist against deterioration and abrasion.
Thicker flap wings help prevent
deterioration of the tube.
New Flap = 7 mm
Thicker bend of the flap wing helps
provide less flowing into the side ring
housing and better resistance to
abrasion at the bead point of the tire.
Old Flap = 4 mm
NYLON PLATES (used on - 15", 20" and 24") are fixed to the flaps for extra support under
very extreme conditions, (heat build up due to the brake drums, very high inflation pressures).
The plate also helps restrict movement of the valve at the valve slot.
Assembly with new flap
and nylon plate
Nylon Plate
Rim
Appendix
80
New Flap
Valve
Tube
TUBES, FLAPS AND VALVES
TABLE OF FLAP CHARACTERISTICS
TUBE
FLAP
SIZE
TUBE
CODE
VALVE
REF
TUBE
CATALOG
NUMBER
OLD
FLAP
CODE
NEW
FLAP
CODE
NEW FLAP
CATALOG
NUMBER
INCLUDES
NYLON
PLATE
7.00R15
15/16F
570
23262
15/16J
1221
73993
200-15L
15x6.00
62152
YES
8.25R15
15K
1221
38850
10.00R15
15P
582
04560
220-15L
15x7.50
58753
YES
7.50R16
16J
7.50R16
16J150
1156
28182
170-16L
16x6.00
97037
NO
923
37836
9.00R16
16M
1713
18456
9.00R16
16N
579
17786
170-16LD
16x6.00D
94605
NO
11.00R16
6P15
611
03062
7.50R17
17K
1348
26362
170-17LD
17x6.00D
45608
NO
200-20L
20x7.50
44274
YES
20x8.50
49781
YES
20x10.00
47501
YES
48842
YES
7.00R15
7.50R15
7.50R20
20J
1156
37776
8.25R20
20K
1021
13924
9.00R20
20M
1157
25980
10.00R20
20N
1158
17078
11.00R20
20P
1158
06934
210-20LB
12.00R20
20Q
1158
39144
240-20L
14/80R20
20Q
1158
39144
395/85R20
20S
582
32420
20P15
611
37090
335/80R20
20P
1158
06934
365/80R20
20Q
1158
39144
20S
582
32420
20V
576
32961
14.00R20
12.5R20
14.5R20
14.75/80R20
280-20L
270-20LB
270-20LB
310-20LB
16.00R20
24R21
21 WAM
1837
39650
10.00R22
22N
734
12682
11.00R22
22P
734
12716
11.00R24
24P
582
48983
12.00R24
24Q
582
11708
14.00R24
24/25T
1837
01072
17-20
N/A
220-22L
N/A
230-24/25L
24/25x8.50
13-24/25
N/A
Appendix
15.5/80R20
81
UNITS
Quantity
Length
S.I. Units
m
(meter)
Mass
Other Units
1 inch (") = 0.0254 m or 25.4 mm
1 mile = 1609 m (1.609 km)
1 kilometer = 0.621 mile
kg
1 pound (lb) = 0.4536 kg
(Kilogram) 1 kilogram (kg) = 2.205 lbs.
Pressure
kPa
(Pascal)
Speed
1
1
1
1
bar* = 100 kPa
psi = 6.895 kPa
pound per square inch
kg/cm - 98.066 kPa
2
m/s
1 kilometer per hour (kph)* =
(meter per
0.27778 m/s
second) 1 mile per hour (mph) = 0.4470 m/s
(or 1.60935 kph)
* Non S.I. unit to be retained for use in specialized fields.
LOAD RANGE / PLY RATING
B
–
4
F
–
12
L
–
20
C
–
6
G
–
14
M
–
22
D
–
8
H
–
16
E
–
10
J
–
18
SPEED SYMBOL
The ISO* SPEED SYMBOL indicates the speed at which the tire can carry a load corresponding to its
Load Index under service conditions specified by the tire manufacturer.
Speed
Symbol
Appendix
A1
A2
A3
A4
A5
A6
Speed
(kph)
mph
5
10
15
20
25
30
2.5
5
10
12.5
15
20
Speed
Symbol
A7
A8
B
C
D
E
* International Standards Organization
Exceeding the lawful speed limit is neither recommended nor endorsed.
82
Speed
(kph)
mph
35
40
50
60
65
70
22.5
25
30
35
40
43
Speed
Symbol
F
G
J
K
L
M
N
Speed
(kph)
mph
80
90
100
110
120
130
140
50
56
62
68
75
81
87
LOAD INDEX
Load
Index
kg
lbs.
Load
Index
kg
lbs.
Load
Index
kg
lbs.
100
800
1,765
134
2,120
4,675
168
5,600
12,300
101
825
1,820
135
2,180
4,805
169
5,800
12,800
102
850
1,875
136
2,240
4,940
170
6,000
13,200
103
875
1,930
137
2,300
5,070
171
6,150
13,600
104
900
1,985
138
2,360
5,205
172
6,300
13,900
105
925
2,040
139
2,430
5,355
173
6,500
14,300
106
950
2,095
140
2,500
5,510
174
6,700
14,800
107
975
2,150
141
2,575
5,675
175
6,900
15,200
108
1,000
2,205
142
2,650
5,840
176
7,100
15,700
109
1,030
2,270
143
2,725
6,005
177
7,300
16,100
110
1,060
2,335
144
2,800
6,175
178
7,500
16,500
111
1,090
2,405
145
2,900
6,395
179
7,750
17,100
112
1,120
2470
146
3,000
6,610
180
8,000
17,600
113
1,150
2,535
147
3,075
6,780
181
8,250
18,195
114
1,180
2,600
148
3,150
6,940
182
8,500
18,745
115
1,215
2,680
149
3,250
7,160
183
8,750
19,295
116
1,250
2,755
150
3,350
7,390
184
9,000
19,845
117
1,285
2,835
151
3,450
7,610
185
9,250
20,400
118
1,320
2,910
152
3,550
7,830
186
9,500
21,000
119
1,360
3,000
153
3,650
8,050
187
9,750
21,500
120
1,400
3,085
154
3,750
8,270
188
10,000
22,050
121
1,450
3,195
155
3,875
8,540
189
10,300
22,720
122
1,500
3,305
156
4,000
8,820
190
10,600
23,400
123
1,550
3,415
157
4,125
9,090
191
10,900
24,040
124
1,600
3,525
158
4,250
9,370
192
11,200
24,700
125
1,650
3,640
159
4,375
9,650
193
11,500
25,360
126
1,700
3,750
160
4,500
9,920
194
11,800
26,020
127
1,750
3,860
161
4,625
10,200
195
12,150
26,800
128
1,800
3,970
162
4,750
10,500
196
12,500
27,565
129
1,850
4,080
163
4,875
10,700
197
12,850
28,355
130
1,900
4,190
164
5,000
11,000
198
13,200
29,110
131
1,950
4,300
165
5,150
11,400
199
13,600
30,000
132
2,000
4,410
166
5,300
11,700
200
14,000
30,870
133
2,060
4,540
167
5,450
12,000
201
14,500
31,980
Appendix
The ISO LOAD INDEX is a numerical code associated with the maximum load a tire can carry at the
speed indicated by its SPEED SYMBOL under service conditions specified by the tire manufacturer.
(1 kg = 2,205 lbs.)
83
STATIC AND LOW SPEED LOAD AND PRESSURE COEFFICIENTS
Do not exceed loads or air pressure limits of the wheel or rim without
permission of the component manufacturer.
TIRE AND RIM ASSOCIATION STANDARD
(These Tables apply to tires only. Consult rim/wheel manufacturer for rim/wheel load and inflation capacities.)
Load limits at various speeds for radial ply
truck-bus tires used on improved surfaces. (1)
Exceeding the legal speed limit is neither recommended nor endorsed.
A. METRIC AND WIDE BASE TIRES
B. CONVENTIONAL TIRES
The service load and minimum (cold) inflation must comply
with the following limitations unless a speed restriction is indicated on the tire or the manufacturer rates the tire at 75 mph
or above. (See Table C below.)
The service load and minimum (cold) inflation must comply
with the following limitations unless a speed restriction is indicated on the tire or the manufacturer rates the tire at 75 mph
or above. (See Table D below.)
Radial Ply Tires
Radial Ply Tires
Speed Range
(mph)
% Load Change
Inflation Pressure
Change
Speed Range
(mph)
% Load Change
Inflation Pressure
Change
71 thru 75
66 thru 70
51 thru 65
41 thru 50
31 thru 40
21 thru 30
11 thru 20
6 thru 10
2.6 thru 5
Creep thru 2.5
Creep
Stationary
-12%
-4%
None
+7%
+9%
+12%
+17%
+25%
+45%
+55%
+75%
+105%
+5 psi
+5 psi
No increase
No increase
No increase
+10 psi
+15 psi
+20 psi
+20 psi
+20 psi
+30 psi
+30 psi
71 thru 75
66 thru 70
51 thru 65
41 thru 50
31 thru 40
21 thru 30
11 thru 20
6 thru 10
2.6 thru 5
Creep thru 2.5
Creep
Stationary
-12%
-4%
None
+9%
+16%
+24%
+32%
+60%
+85%
+115%
+140%
+185%
+5 psi
+5 psi
No increase
No increase
No increase
+10 psi
+15 psi
+30 psi
+30 psi
+30 psi
+40 psi
+40 psi
(2)
(2)
Note: For bias ply tires please consult the TRA Year Book.
Load limits at various speeds for radial ply truck-bus tires,
rated at 75 mph or above, used on improved surfaces. (1)
C. METRIC AND WIDE BASE TIRES
D. CONVENTIONAL TIRES
Radial Ply Tires
Speed Range
(mph)
% Load Pressure
Inflation Pressure
Change
71 thru 75
66 thru 70
51 thru 65
41 thru 50
31 thru 40
21 thru 30
11 thru 20
6 thru 10
2.6 thru 5
Creep thru 2.5
Creep
Stationary
None
None
None
+7%
+9%
+12%
+17%
+25%
+45%
+55%
+75%
+105%
No increase
No increase
No increase
No increase
No increase
+10 psi
+15 psi
+20 psi
+20 psi
+20 psi
+30 psi
+30 psi
(2)
Appendix
84
Radial Ply Tires
Speed Range
(mph)
71 thru 75
66 thru 70
51 thru 65
41 thru 50
31 thru 40
21 thru 30
11 thru 20
6 thru 10
2.6 thru 5
Creep thru 2.5
Creep
Stationary
(3)
(3)
(2)(3)
(3)
(3)
% Load Pressure
Inflation Pressure
Change
None
None
None
+9%
+16%
+24%
+32%
+60%
+85%
+115%
+140%
+185%
No increase
No increase
No increase
No increase
No increase
+10 psi
+15 psi
+30 psi
+30 psi
+30 psi
+40 psi
+40 psi
(1) This information does not apply to off-road tires.
(2) Creep – Motion for not over 200 feet in a 30-minute period.
(3) Apply these increases to dual loads and inflation pressures.
Note 1: The inflation pressures shown in the referenced tables are minimum cold pressures for the various loads listed. Higher pressures should be used as follows:
A. When required by the above speed/load table.
B. When higher pressures are desirable to obtain improved operating performance.
Note 2: Load limits at various speeds for:
Tires used in highway service at restricted speed.
Mining and logging tires used in intermittent highway service
PROPER APPLICATION OF ON/OFF ROAD (Y AND L) TIRES
The tires with “Y” or “L” (see Page 25) as the third
character in the tread designations are designed and optimized for on/off road applications and are speed restricted. These tires should not be used in applications that
operate the tires continuously on highway over an extended period of time or at speeds that exceed the speed rating
of the tire. This could lead to heat build up and cause premature or sudden tire failure.
of 50 mph while others have maximum speeds of 55, 60
and of 70 mph.
Tires optimized for highway applications have a maximum speed of 75 mph.
Tires with the “Y” designation are for applications
expected to be 80% On-road use and 20% Off-road use.
They have a maximum speed of 65 mph.
The Tire and Rim Association (TRA) permits operating a 65 mph rated tire at higher speeds with a reduced
load and increased inflation. No such permission is
granted by TRA for tires with speed rating rated below
65 mph.
Tires with the “L” designation are for applications
expected to be 20% On-road use and 80% Off-road use.
Some of the “L” designated tires have a maximum speed
Always refer to this Michelin Truck Tire Data Book
on Page 25 and match the tire to the application when
making tire selections.
COLD CLIMATE PRESSURE CORRECTION
Because the air pressure inside a tire will decrease when
the vehicle is taken from a warm environment to a cold
one, some adjustments may be necessary when adjusting
the tire pressures of a vehicle to be operated in very cold
temperatures.
In extreme cases, the following table should be used to
help ensure that the operating pressure and deflection of
tires are adequate at the outside ambient temperature.
Using the load and pressure charts in the book, determine
the appropriate “Recommended Pressure” required for
the axle load. Then find the same pressure down the left
column of the table to the right. Going across to the relevant outside ambient temperature you will find the corrected inflation pressure to be used.
These adjustments are only necessary if the pressures are
verified and adjusted inside a heated garage with an air
supply that is also at the higher room temperature. (No
adjustment necessary if done outside.)
Adjusted Inflation Pressure (PSI)
(when inflating indoors at 65°F [18°C])
For example:
The truck is equipped with
11R24.5 XZY 3 LRG tires.
®
The recommended pressure for
this fitment is 105 psi.
The truck is parked overnight
in a heated garage.
The outside high forecasted for
today is -20 oF.
The tire pressures are checked
and adjusted prior to leaving
the heated garage.
According to the the chart
below, the tires should be
adjusted to: 128 psi.
Recommended
Pressure
°F
(psi)*
°C
Outside Ambient Temperature
50°
10°
40°
4°
30°
-1°
20°
-7°
10°
-12°
0°
-18°
-10°
-23°
-20°
-29°
-30°
-34°
-40°
-40°
-50°
-46°
75
78
80
81
83
86
88
90
92
95
98
100
80
85
90
95
100
105
110
115
120
125
130
83
88
93
98
103
109
114
119
124
129
134
85
90
95
101
106
111
116
122
127
132
137
87
92
98
103
108
114
119
124
130
135
140
89
94
100
105
111
116
122
127
133
138
144
91
97
102
108
113
119
125
130
136
141
147
93
99
105
111
116
122
128
133
139
145
150
96
102
108
113
119
125
131
137
143
148
154
98
104
110
116
122
128
134
140
146
152
158
101
107
113
119
125
132
138
144
150
156
162
104
110
116
123
129
135
141
148
154
160
166
107
113
119
126
132
139
145
151
158
164
171
* Never exceed the rim manufacturer’s maximum air pressure limitation.
Appendix
A log truck in Alaska has a front
axle capacity of 12,000 lbs.
85
CHANGES IN TOP SPEED
WHEN TIRE’S REV./MILE CHANGES
When changing from a standard tire to a low profile tire or to a tire with a different aspect ratio, the changes in the Tire’s
Rev./Mile will affect the accuracy of the speedometer reading at top speed.
• The formula for calculating the top speed is:
Top Speed (MPH)
= Engine RPM x 60
(Tires Rev./Mile) x R
Where MPH
= Miles Per Hour
RPM
= Revolutions Per Minute (Engine)
R
= Overall Gear Reduction
• Since engine RPM and R will remain the same when changing from one tire to another, the comparison is simply a
straight ratio of the Tire’s Rev./Mile.
Example:
RATIO
TIRES REV./MILE
8R19.5 LRF = 619
225/70R19.5 LRF = 647
619 ÷ 647 = .96
If the top speed for a vehicle originally equipped with 8R19.5 LRF tires is 75 MPH,
the top speed with 225/70R19.5 LRF tires will be (.96) (75 MPH) = 72 MPH.
Therefore, when the vehicle’s speedometer reads 75 MPH the vehicle is actually traveling 72 MPH. If the top speed for a
vehicle originally equipped with 225/70R19.5 LRF tires is 75 MPH, the top speed with 8R19.5 LRF tires will be (647 ÷ 619) (75
MPH) = (1.05) (75 MPH) = 78.8 MPH. The speedometer will read 75 MPH when the vehicle is actually traveling 78.8 MPH.
Rule of Thumb: When going from a lower Tire Rev./Mile to a higher Tire Rev./Mile, the actual vehicle speed is less than the
speedometer reading. When going from a higher Tire Rev./Mile to a lower Tire Rev./Mile, the actual vehicle speed is
greater than the speedometer reading.
Appendix
86
To determine the proper load/inflation table, always comply with to the markings on the tire sidewall for maximum
load at cold pressure.
Load and inflation industry standards are in a constant state of change. Michelin continually updates its product information to reflect these changes.
Therefore, printed material may not reflect the current load and inflation information.
NOTE: Never exceed the wheel manufacturer’s maximum air pressure limitation.
S = Single configuration – 2 tires per axle. D = Dual configuration – 4 tires per axle. Loads are indicated per axle.
LOAD / INFLATION TABLE FOR MICHELIN 315/80R22.5 LRL
The following table applies to LRL use with 8.25x22.5 Wheels.
8.25” rim – New Michelin recommendation (loads per axle):
Dimension
Load
psi
80
85
90
95
100
105
110
115
Range
kPa
550
590
620
660
690
720
760
790
830
315/80R22.5
8.25" rim
Minimum dual spacing 13.2" (335 mm)
L
120
lbs.
S
11570
12140
12710
13280
13820
14380
14920
15460
16000
per axle
D
22000
23100
24180
25260
26300
27360
28400
29440
30440
kg.
S
5220
5520
5740
6040
6260
6480
6760
6980
7260
per axle
D
9920
10520
10920
11480
11920
12320
12880
13280
13800
Note: Never exceed the wheel manufacturer's maximum cold air pressure limitation and/or load rating.
TECHNICAL SPECIFICATIONS FOR MICHELIN 455/55R22.5
LRM WITH 13.00X22.5 WHEELS — SANITATION TRUCK
STEER AXLE, FIRST LIFE ONLY
Dimension
455/55R22.5
Dimension
455/55R22.5
13.00" rim
Load
Loaded Radius
Range
in.
mm.
LRM
19.5
496
RPM
493
Max. Load Single*
lbs.
psi
kg.
kPa
10000
120
4535
830
Load
psi
75
80
85
90
95
100
105
110
115
Range
kPa
520
550
590
620
660
690
720
760
790
120
830
LRM
lbs. per axle
13740
14460
15180
15880
16600
17280
17980
18660
19340
20000
kg. per axle
6240
6520
6900
7180
7560
7820
8100
8460
8720
9070
Appendix
* Note: When used on a 13.00" rim the max load and pressure is lower than that indicated on the sidewall.
87
TIRE / WHEEL ASSEMBLY BALANCE AND RUNOUT LIMITS
Tire Position
19.5
Tires/Wheels
Over The Road
Applications
On-Off Road
Applications
Wide Base
Tires/Wheel
Maximum total weight correction expressed in ounces of weight
required to correct at rim diameter per rotating assembly
Steer
14 oz.
16 oz.
18 oz.
24 oz.
Drive/Trailer
18 oz.
20 oz.
22 oz.
28 oz.
Lateral runout for rotating assembly
Steer/Drive
0.095"
0.095"
0.110"
0.125"
Trailer
0.125"
0.125"
0.125"
0.125"
Radial runout for rotating assembly
Steer/Drive
0.095"
0.095"
0.110"
0.125"
Trailer
0.125"
0.125"
0.125"
0.125"
NOTE: If tire and wheel assembly is within these limits and ride problem still exists, refer to TMC RP648 Diagnosing Ride Complaints.
RECOMMENDED BALANCE AND RUNOUT VALUES
FOR DISC WHEELS AND DEMOUNTABLE RIMS
Balance
(See Note 2)
Radial Runout
(See Note 3)
Lateral Runout
(See Note 3)
Tubeless Steel Disc Wheels
6 oz. max
0.07 inch max
0.07 inch max.
Tubeless Aluminum Disc Wheels
4 oz. max
0.03 inch max
0.03 inch max
N/A
0.07 inch max
0.07 inch max
Steel
See Note 1
0.75 inch max
0.75 inch max
Aluminum
See Note 1
0.30 inch max
0.30 inch max
Tubeless Demountable Rims
Wide Base Wheels:
NOTE 1: Refer to the manufacturer’s specifications for balance and runout values.
NOTE 2: Amount of weight applied to rim to balance individual wheel component.
NOTE 3: For steel wheels and demountable rims, the area adjacent to the rim butt weld is not considered in runout measurements.
Appendix
88
NOTES
89
NOTES
90
Michelin Data Book
RV Tires • Commercial Light Truck Tires • Truck Tires • Retreads
To learn more please contact
your Michelin Sales Representative or visit
www.michelintruck.com
To order more books, please call
Promotional Fulfillment Center
1-800-677-3322, Option #2
Monday through Friday, 9 a.m. to 6 p.m. Eastern Time
MICHELIN NORTH AMERICA, INC., Greenville, South Carolina, USA
MICHELIN NORTH AMERICA (CANADA) INC., Laval, Quebec, Canada
MICHELIN MEXICO S.A. DE C.V., Querétaro, Mexico
An Equal Opportunity Employer
© 2006 MNA, Inc. (02/06)
MWL40731

advertisement

Related manuals

Download PDF

advertisement

Languages