employees` state insurance corporation hospital, peenya

employees` state insurance corporation hospital, peenya
EMPLOYEES’ STATE INSURANCE CORPORATION
HOSPITAL, PEENYA
(Under Ministry of Labour& Employment, Govt. of India)
Sy.No. 11/55/1, Plot No.1, 5th Main (FTI Campus), Yeshwanthpur
Industrial Suburb, Bengaluru – 560 022
Telefax: No.080-23579467
e-mail:esichpeenya@gmail.com
No. 492/U/16/30/2012/Central Stores
Dated: 31.07.2012
TENDER NOTIFICATION
Sealed and superscribed tenders are invited from reputed Manufacturers or their sole
authorized dealers, in prescribed tender forms for “SUPPLY, INSTALLATION,
COMMISSIONING & MAINTENANCE OF MEDICAL EQUIPMENTS TO
VARIOUS DEPARTMENTS”. The list of medical equipment is as under:
LIST OF MEDICAL EQUIPMENTS
Sl.No
Tender No.
Name of the Equipment
Qtt
EMD
(In Rs.)
Perf.
BG
(In Rs.)
LABORATORY
GROUP - 1
1
NO.492/U/16/30/2012/A(1)/LAB
Digital Incubator
1
1250
2500
2
NO.492/U/16/30/2012/A(2)/LAB
Trinocular microscope with
photomicrography and
facility for upgradation
1
14000
28000
3
NO.492/U/16/30/2012/A(3)/LAB
1
2500
5000
4
NO.492/U/16/30/2012/A(4)/LAB
4
10000
20000
5
NO.492/U/16/30/2012/A(5)/LAB
Hot Air oven
1
1000
2000
6
NO.492/U/16/30/2012/A/(6)/LAB
Centrifuge
3
4500
9000
NO.492/U/16/30/2012/A/(7)/LAB
Semi Automated
coagulation Analyser
1
5000
10000
7
Slide Cabinet (50000
capacity)
Binocular microscope with
illumination
GENERAL SURGERY
GROUP - 1
1
NO.492/U/16/19//2012/B(1)/SURG
LED Mobile O.T Light
7
17500
35000
2
NO.492/U/16/19/2012/B(2)/SURG
OT TABLE FOR MINOR OT
1
50000
100000
PEDIATRICS
GROUP - 1
NO.492/U/16/30//2012/F(1)/PED
Electronic digital weighing
scales
NO.492/U/16/30/2012/F(1i)/PED
I) Neonate
2
2000
4000
NO.492/U/16/30/2012/F(1ii)/PED
ii) Infant & Child
2
2000
4000
2
NO.492/U/16/30/2012/F(2)/PED
Ophthalmoscope
2
1500
3000
3
NO.492/U/16/30/2012/F(3)/PED
Cutaneous bilirubinometer
1
8750
17500
4
NO.492/U/16/30/2012/F(4)PED
Double surface CFL
Phototherapy
4
14000
28000
5
NO.492/U/16/30/2012/F(5)/PED
Neonatal open care system
8
200000
400000
6
NO.492/U/16/30/2012/F(6)/PED
Resuscitation warmer
2
6000
12000
1
GROUP - 1
Tender opening
dates
DERMATOLOGY
GROUP - 1
Date of opening
Technical bids 05.09.2012.
Date of
demonstration
of equipment
by tenderers
qualifying in
Technical bids 06.09.2012.
Date of opening
of Financial
tenders of
tenderers
qualifying
through
technical bids &
demonstration 07.09.2012
1
NO.492/U/16/30/2012/H(1)/DERMA
Liquid nitrogen cryojet
machine
1
2500
5000
2
NO.492/U/16/30/2012/H(2)/DERMA
Graft spreader and
dissector, double ended
1
2500
5000
3
NO.492/U/16/30/2012/H(3)/DERMA
High frequency radio surgery
unit – electro diathermy
machine
1
1250
2500
4
NO.492/U/16/30/2012/H(4)/DERMA
Dark field microscope
1
10000
20000
5
NO.492/U/16/30/2012/H(5/DERMA
Nail extractor & dissector
1
1000
2000
6
NO.492/U/16/30/2012/H(6)/DERMA
Tattoo pencil set
1
1500
3000
E.N.T
GROUP - 2
1
NO.492/U/16/30//2012/C(1)/ENT
E.N.T Operating Microscope
with Zoom and 5 step
magnification changer
2
NO.492/U/16/30//2012/C(2)/ENT
Clinical Diagnostic Pure tone
Audiometry
GROUP - 2
GROUP - 2
1
25000
50000
1
10000
20000
OPHTHALMOLOGY
1
NO.492/U/16/30/2012/L(1)/OPTH
Goldmann aplanation
tonometer
2
NO.492/U/16/30/2012/L(2)/OPTH
A Scan
1
6250
12500
3
NO.492/U/16/30/2012/L(3)/OPTH
Automated Perimeter
1
45000
90000
4
NO.492/U/16/30/2012/L(4)/OPTH
Indirect Ophthalmoscopy
1
4000
8000
5
NO.492/U/16/30/2012/L(5)/OPTH
Automated Lensometer with
printer
1
11250
22500
6
NO.492/U/16/30/2012/L(6)/OPTH
Operating Microscope
(Ophthalmology)
1
60000
120000
NO.492/U/16/30/2012/I(1 )/CAS
4250
8500
GROUP - 3
CASUALITY
GROUP - 3
1
1
Multi parameter bedside
monitor
12
120000
240000
15
1500
7500
1
7500
15000
MEDICINE
GROUP - 3
Nebulizer
1
NO.492/U/16/30/2012/K(1)/MED
1
NO.492/U/16/30//2012/M(1)/ANAS
1
NO.492/U/16/30/2012/N(1)/ICU
Defibrillator
8
120000
240000
2
NO.492/U/16/30/2012/N(2)/ICU
Syringe pump
8
24000
48000
3
NO.492/U/16/30/2012/N(3)/ICU
Blood Gas Analyser
1
50000
100000
4
NO.492/U/16/30/2012/N(4)/ICU
Fluid Warmers
4
18000
36000
GROUP - 3
ANAESTHESIOLOGY
Nerve Stimulator
GROUP - 3
GROUP - 4
ICU
OCCUPATIONAL THERAPY
1
NO.492/U/16/30//2012/D(1)/OCC.TH
Dual channel E.M.G
1
2500
5000
2
NO.492/U/16/30//2012/D(2)/OCC.TH
Finger Dextrity Testy
1
1000
2000
3
NO.492/U/16/30//2012/D(3)/OCC.TH
cerebral palsy chair
1
750
1500
4
NO.492/U/16/30//2012/D(4)/OCC.TH
Hand Dynamometer
1
1000
2000
NO.492/U/16/30//2012/D(5)/OCC.TH
Hand Evaluvation kit
(JAMER)
1
2500
5000
5
Date of opening
Technical bids 10.09.2012.
Date of
demonstration
of equipment
by tenderers
qualifying in
Technical bids 11.09.2012.
Date of opening
of Financial
tenders of
tenderers
qualifying
through
technical bids &
demonstration 12.09.2012.
Date of opening
Technical bids 13.09.2012.
Date of
demonstration
of equipment
by tenderers
qualifying in
Technical bids –
14.09.2012.
Date of opening
of Financial
tenders of
tenderers
qualifying
through
technical bids &
demonstration 15.09.2012.
6
NO.492/U/16/30//2012/D(6)/OCC.TH
Hand Tapper test board
(Electric)
7
NO.492/U/16/30//2012/D(7)/OCC.TH
8
1set
750
1500
Hand Tool Test Frame
1
750
1500
NO.492/U/16/30//2012/D(8)/OCC.TH
P.E.G Board Test (PURDUE
PEG BOARD)
1
1500
3000
9
NO.492/U/16/30//2012/D(9)/OCC.TH
Sensory Integration and
praxis test (SIPT)
1
2500
5000
10
NO.492/U/16/30//2012/D(10)/OCC.TH
Activity Mattress
1
750
1500
11
NO.492/U/16/30//2012/D(11)/OCC.TH
Ankle Excerciser
1
750
1500
12
NO.492/U/16/30//2012/D(12)/OCC.TH
Continous passive motion
(UPPER EXTREMITY)
1
2000
4000
13
NO.492/U/16/30//2012/D(13)/OCC.TH
Ergometer-MX-1
1
2000
4000
14
NO.492/U/16/30//2012/D(14)/OCC.TH
Medicinal Balls (1-5kgs)
1each
2500
5000
15
NO.492/U/16/30//2012/D(15)/OCC.TH
Nirmal Table For Hand
Excerciser
1
1000
2000
16
NO.492/U/16/30//2012/D(16)/OCC.TH
Peddo Cycle
1
1500
3000
17
NO.492/U/16/30//2012/D(17)/OCC.TH
Sanding unit overhead with
stand
1
750
1500
18
NO.492/U/16/30//2012/D(18)/OCC.TH
1
750
1500
19
NO.492/U/16/30//2012/D(19)/OCC.TH
1
750
1500
20
NO.492/U/16/30//2012/D(20)/OCC.TH
1
1250
2500
21
NO.492/U/16/30//2012/D(21)/OCC.TH
Vestibulo proprioceptive
equipments- a) Swing
1set
1500
3000
22
NO.492/U/16/30//2012/D(22)/OCC.TH
Ramp with Curbs
1
1000
2000
23
NO.492/U/16/30//2012/D(23)/OCC.TH
Bubble ball bath (with Balls)
1
1000
2000
24
NO.492/U/16/30//2012/D(24)/OCC.TH
JUMP – 200 (Trampoline)
1
750
1500
25
NO.492/U/16/30//2012/D(25)/OCC.TH
Thermoplast sheets ( 10
sheets)
10
3000
6000
26
NO.492/U/16/30//2012/D(26)/OCC.TH
Splint thermal bath
1
1000
2000
27
NO.492/U/16/30//2012/D(27)/OCC.TH
Foam pad ( Ethaflex) 10
sheets
10
750
1500
28
NO.492/U/16/30//2012/D(28)/OCC.TH
Wheel chair (adjustable)
1
1250
2500
29
NO.492/U/16/30//2012/D(29)/OCC.TH
Multiactivity workstation
1
2500
5000
Sanding unit vertical (wall
mounting)
Sanding unit with adjustable
incline for reciprocal
exerciser
Tilt table (Electrically
operated)
GROUP - 4
GROUP - 4
Date of opening
Technical bids 20.09.2012.
Date of
demonstration
of equipment
by tenderers
qualifying in
Technical bids 21.09.2012.
Date of opening
of Financial
tenders of
tenderers
qualifying
through
technical bids &
demonstration
22.09.2012.
PHYSIOTHERAPY
1
NO.492/U/16/30//2012/E(1)/PHY
Hand exerciser
1
1595
3190
2
NO.492/U/16/30//2012/E(2)/PHY
Upright bi-directional bike
2
3160
6320
Detailed information with all terms and conditions are given in the Tender
Document. Application forms and the tender documents can be obtained in person from
Central Stores of the office of the Medical Superintendent by giving a request letter on
letter head of the tenderer along with a crossed DD / Banker's Cheque for Rs.1,000/(Rupees One thousand only), drawn in favour of ESIC a\c NO.1, payable at Bangalore.
The application fee is non-refundable. Application &Tender document can be
downloaded from our Website www.esickar.gov.in &www.eprocure.gov.in
-SdMedical Superintendent
ANNEXURE - 1
IMPORTANT INSTRUCTIONS TO TENDERERS
Application forms & tender documents are non-transferable.
SIGNING OF TENDER:
Individuals signing tender or other documents connected with the contract specify:
(i) Whether signing as a “Sole Proprietor” of the firm or his attorney.
(ii) Whether signing as a “Registered Active Partner” of the firm or his attorney.
(iii) Whether signing for the firm “Per Procurationem.”
(iv) In the case of companies and firms registered under the Indian Partnership Act
the - capacity in which signing, e.g. Secretary, Manager, Partner etc. or their attorney
and produce copy of a document, empowering him to do so, if called upon to do so.
Note: In case of unregistered firms all the members or all attorneys duly authorized
by all of them or the Manager of the firm should sign the tender and subsequent
documents.
ADDRESSING THE TENDER:
The tender documents should be addressed to “The Medical Superintendent, ESIC
Hospital, 5th Main Road (FTI Campus), Yeshwanthpur Industrial Sub-urb, Bengaluru –
560 022”.
PREPARATION OF TENDER:
a) Tenders should be prepared in three separate covers for (i) Price bid (in triplicate)
(ii) Technical bid (in triplicate) and (iii) Bid Guarantee, all three duly sealed,
superscribed and addressed to the hospital.
b) All the above referred three envelopes should be placed in a big envelope which
will form the main cover. This main cover must be superscribed “Tender for
_________________________ due on ___________ at ___________ Hrs.
c) The technical bid should contain precise technical, operating & maintenance
details. Any limitations or extension of the requirement should be clearly spelt
out. Bids not giving the precise technical details are liable to be rejected. The
operating and service manual of the equipment should accompany the technical
bid.
d) The Price bid should contain quotes both in figures & words. Bids not giving the
quote in words are liable to be rejected.
e) In addition to quoting for the equipment as per the format, the tenderer must also
quote the charges and terms and conditions of CMC/AMC service for a period of
5 (five) years for maintaining the equipment at this hospital after the expiry of the
period or warranty / guarantee. The service contract charges should be quoted
only for labour (which will include the cost of the engineer’s / support staff’s
time, travel, etc.) and excluding the cost of any replacements / components that
may be required at the time of providing such service.
DELIVERY OF TENDER DOCUMENTS:
a) The bids should be submitted to the office as detailed elsewhere in this document,
within the stipulated date & time. No relaxations / exceptions will be permitted in
this regard, under any circumstances.
b) The price bid/Bid Guarantee should be kept valid for acceptance for a period of
180 days after opening of the tender.
c) The purchaser will not be responsible for any postal delay or any other cause that
may lead to delay in the receipt of the tender documents in this office beyond the
stipulated date and time stated in the tender documents.
WHO CAN BID:
a) Only manufacturers or their sole authorized distributors / sole agents are entitled to
submit the bid documents.
b) All offers other than from the manufacturers should be supported by an authority
letter in original from the manufacturer/s authorizing the firm to submit bids on their
behalf.
c) Certificate to the effect that the bidder is the manufacturer of the equipment /
authorised sole distributors or sole agents for manufacturer on whose behalf they are
quoting, must be included in the documents. The said certificate should be duly
attested & stamped by the authorized signatory of the manufacturer / sole authorised
distributor or sole agent, as the case may be.
d) The firm should enclose a certificate that they are enrolled with the Directorate
General of Supplies & stamped by the authorized signatory of the firm. The
firm should enclose a certificate that they are enrolled with the Directorate
General of Supplies & Disposals, Parliament Street, New Delhi to act as Indian
Agent.
IMPORTANT DATES FOR ISSUE & SUBMISSION OF TENDER
DOCUMENTS:
a) Tender documents can be obtained from the Central Stores of the Office of the
Medical Superintendent from 6/08/2012 to 27/08/2012, between 1000 Hrs &
1500 Hrs on all working days, on submitting an application in writing, enclosing
a DD/BPO for an amount of Rs1000/- (Rupees One thousand only), drawn in
favour of “ESIC A/c No.1”, payable at Bengaluru & issued by any nationalised
bank.
b) The last date for submission of duly filled in applications alongwith all
enclosures as mentioned in this document is 4/09/2012, 1500 Hrs. No
applications submitted after the due date or time shall be accepted by the hospital
under any circumstances. In the event of the day of submission and opening of the
tender being a holiday for hospital then due date for submission of completed
tenders / opening of the tender will be the immediately following working day at
the same hour.
c) Application & the tender document can also be downloaded from our web site
www.esickar.gov.in. & www.eprocure.gov.in.
In case of applications &
documents downloaded from the web site, the same shall be submitted alongwith
the application fees, failing which the application is liable for rejection and no
further communication shall be entertained in the matter.
TERMS & CONDITIONS:
a) During the service contract period the firm shall provide preventive maintenance
and in addition attend to all emergent and breakdown calls.
b) During the currency of the Warranty/Guarantee period, all parts, replacements /
components covered therein shall be replaced free of cost, including labour.
c) During the CMC/AMC service period, charges / costs, as per the agreed terms,
based on the bids submitted shall be paid by the hospital. However, the firm
should complete all formalities of procuring / importing the parts / replacements /
components etc., the cost of which shall be borne by the hospital, on submission
of authenticated documentary evidence for all the expenses incurred thereon, after
the satisfactory service, duly certified by the user department.
d) The bidders are required to submit a certificate that they have satisfactory service
arrangements and fully trained service staff to support the uptime guarantees.
Details of the service centres alongwith the postal addresses & contact persons &
telephone numbers should also be enclosed to the technical bid. Tenders not
containing service contract details & charges are liable to be rejected.
e) The bidders are required to undertake the repair / replacement / service /
maintenance of the equipment supplied by them through CMC/AMC, till the
operating life of the equipment. The bidders cannot opt out of the CMC/AMC
service contract, except under the condition that their entity has become insolvent
or liquidated or stops their operations completely.
f) Bidders must attach, along with the Technical Bid a photocopy of the relevant
document showing the constitution of the entity, with the details of all the stake
holders of the entity.
g) Foreign firms bidding directly should attach along with the technical bid, a
certificate giving the name and address of their Indian agents or their
representatives in position, in India for servicing the equipment.
h) In case the bid is from other than manufacturers, then a certificate that the
quantum of Commission charged by them is the same or lesser than that being
charged to other departments / Institutions for similar/same items, must
accompany the Technical Bid. A list detailing all places in India where the
same/similar equipment has been provided/installed by the bidder should be
attached. Documentary evidence wherever possible, in support of this list and also
certificates of its satisfactory working from those mentioned in the list, should be
enclosed.
i) In case the offer is from other than manufacturers, then a letter of authority from
the manufacturers authorizing the firm to tender on their behalf must accompany
the technical bid, failing which the bid is liable to be rejected.
j) Bidders must furnish along with the technical bid the latest, current, valid, Income
Tax clearance Certificate and Sales Tax Certificate or attested photocopies there
of.
k) Bidders must furnish along with their technical bid a certificate that the Agency
Commission, if any payable, has been included and that no Agency Commission
l)
m)
n)
o)
p)
q)
r)
s)
t)
u)
v)
w)
x)
y)
other than that included in the bid price is payable by the manufacturers to the
Agency.
The tender must be accompanied with the stipulated Earnest Money as detailed
elsewhere in this document.
Bids not accompanied by Earnest money as stated above or less are liable to be
rejected.
Earnest money / security deposit / any other sums of the tenderers with the
hospital in connection with any other tender / case will not be considered against
this tender.
The successful bidder shall be required to furnish a contract Performance
Guarantee by way of a Bank Guarantee, issued by a nationalised bank for an
amount as stipulated elsewhere in this document, at the time of execution of the
Agreement.
The Bank guarantee should be for a period covering the entire CMC/AMC service
contract, including the warranty/guarantee period. The Bank guarantee should be
submitted within a period of 15 days after the placement of the supply order or
supply of the equipment, whichever is earlier, failing which the order is liable to
be cancelled and the Earnest money forfeited.
The Bank guarantee is returnable to the equipment supplier on completion of the
normal operating life of the equipment.
The hospital reserves their right to invoke the Bank guarantee, if any of the terms
& conditions of the supply is not met by the supplier.
The Earnest Money is returnable to both the successful and other bidders, after the
submission of the Bank guarantee and within three months from the completion of
the tendering process, respectively.
The hospital does not pledge itself to accept the lowest or any other tender, and
reserves it’s right to accept the whole or any part of the tender or portion of the
quantity offered and the bidder shall be required to supply the same at the rate
quoted. The hospital reserves it’s right to accept or reject any or all the tenders
without assigning any reasons there of.
CUSTOMS CLEARANCE: The equipment requiring import from abroad shall
be done so under the OGL scheme, for which tenderer will ensure before
shipment takes place, that the equipment in question can be imported under the
said scheme.
It will be the responsibility of the tenderer to get the customs clearance of the
equipment with the assistance of the hospital, as required, by way of providing
any letters / authorisations, etc. The tenderer will pursue any claims with the
custom authorities / insurance company / cargo operators and transporters as may
arise at any stage.
The N.M.I.C (Not manufactured in India) Certificate, the duty exemption
certificate and any other documents required for custom clearance will be
provided by the hospital.
INSURANCE: The tenderer will ensure that the equipment is properly insured
for the full CIF value to cover the transit upto installation site & period.
If the installation is delayed beyond the agreed date of satisfactory installation,
commissioning and handing over of the equipment, then in that event any transit
and storage damages which come to light after such delays, shall be at the sole
risk, responsibility and cost of the tenderers.
z) The tenderer shall provide to the hospital after the inspection, a detailed list of any
loss or damage to the equipment that may have occurred so as to enable the
hospital to file appropriate claims with the Insurance Company. However, it shall
be the responsibility of the hospital to prepare, lodge and pursue any claims that
may arise with the Insurance Company.
aa) The tenderer shall provide all assistance in pursuing any such insurance claims
expeditiously. The tenderer shall make free replacement, if required, in lieu of
damaged / lost items etc., irrespective of any settlement by the insurers.
bb) The tenderer’s liability shall be restricted to making free replacement /
rectification and any local expenses such as custom duty, Octroi, clearance, etc.
connected with such replacements shall be borne by the hospital.
cc) If, in consideration or offer of earlier delivery, the contract is placed with higher
tenderer on preference to the lowest offer, the tenderer will be liable to pay to the
hospital the difference between the contract rate and that of the lowest acceptable
tenders on the basis of the final price CIF destination, including all elements of
freight, sales tax, local taxes, duties and other incidentals, in case of failure to
complete supplies in terms of such contract within the date of delivery specified
and incorporated in the contract. This is in addition to compensating the hospital
on all other losses and damages resulting from delayed supplies and cancellation
and risk purchase in case of failure to supply the equipment.
dd) GUARANTEE / WARRANTY: The tenderer will be required to furnish
guarantee / warranty from the manufacturers as under against defects of
manufacture / workmanship and poor quality components for the entire equipment
shall be for a period of 24 months with spares, and 36 months without spares
starting from the date of satisfactory installation / commissioning and handing
over of the equipment in working order.
ee) During the guarantee / warranty period, the replacement of any part(s) /
components of the equipment or rectification of defects of works will be free of
cost. In case of any replacement during guarantee / warranty period, all
formalities connected with such import of replacement shall be completed by the
tenderer with the assistance of the hospital, as required. Further, the defective
parts / equipment shall be returned by the hospital to the supplier, after
replacement.
ff) If there are any parts that are consumable in nature which are not covered under
the above said guarantee / warranty clause, then details of same with
nomenclature etc. must be furnished.
gg) The tenderer should submit a certificate that the equipment being offered is the
latest model as per specifications and that spares for the equipment will be
available for a period of at least 10 years after the warranty period. The tenderer
should also certify that they will keep the hospital informed of any update of the
equipment over a period of next 5 years and undertake to provide the same to the
hospital at no extra cost.
hh) The tenderer will guarantee that they will regularly supply any items of spare
parts requisitioned by the hospital for satisfactory operation of the equipment till
the completion of the normal life span of the equipment, as and when required, on
agreed basis for an agreed price. The agreed basis could be an agreed discount on
the published catalogue price or an agreed percentage of profit on the landed cost.
ii) The tenderer will further guarantee that the hospital will be given advance notice,
before the parts / components, etc. of an equipment goes out of production so that
the hospital will be in a position to procure the required quantity of these parts /
components to ensure that the equipment completes it’s normal life span without
any irreparable break downs.
jj) The tenderer should guarantee that they will make available to the hospital the
blue – prints and drawings of the spare parts if and when required in connection
with the equipment.
kk) UNDERTAKING: The tenderer shall furnish the undertaking, alongwith the
tender document to the effect that the goods / stores / articles supplied to the
hospital under this contract shall be of the best quality and workmanship and shall
be strictly in accordance with the specifications and particulars contained /
mentioned in the clause here of and the tenderer hereby guarantee that the said
goods / stores / articles conform to the description and quality aforesaid. The
hospital will be entitled to reject the said goods / stores / articles or such portion
there of as may be discovered not to conform to the said description and quality.
And on such eventuality, the goods / stores / articles will be at the tenderer’s
risk& responsibility and all the provisions here in contained relating to rejection
of goods etc. shall apply. The tenderer shall, if called upon to do so, replace
within a period of fourteen days or such time as may be stipulated by the hospital
at their discretion, the goods / stores / articles or such portion there of as rejected
by the hospital and in such an event the above mentioned warranty period shall
apply to the goods / stores / articles replaced from the date of the replacement
there of, otherwise the tenderer shall pay to the hospital such damage as may arise
by reason of breach of the conditions here in contained. Nothing herein contained
shall prejudice any other right of the hospital in this regard.
ll) MODE OF DESPATCH, DELIVERY AND COMMISSIONING OF
EQUIPEMENT: The equipment with all its accessories should be dispatched
duly insured, freight, insurance and all incidental charges prepaid. The tenderer is
required to undertake to deliver, install and commission the equipment within a
period of 15 days or as expressly stipulated in the supply order.
mm)
DELAY IN SUPPLIES / INSTALLATION (LIQUIDATED
DAMAGE): In the event of delays in supply, installation and commissioning of
the equipment to the satisfaction of the hospital beyond the stipulated date / time,
the hospital shall have full rights to recover damages at the rate of 1% of the CIF
value of the equipment (including components, spares, accessories and optional
items) per each day of delay or part there of, till the actual supply, installation &
commissioning of the equipment to the satisfaction of the hospital, subject to a
maximum of 10% of the CIF value, beyond which the supply order shall stand
automatically cancelled, the EMD forfeited & the Bank Guarantee is liable to be
invoked.
nn) OPENING OF BIDS: The Technical bids shall be opened first on the dates
stipulated elsewhere in this document. The tenderers are also required to give a
demonstration of their equipment vis-à-vis the specifications offered, before the
Technical Evaluation Committee (TEC). The space, electric power & such
normal facilities that are available with the hospital will be provided for the
technical demonstration. However, all the required materials and other
paraphernalia required for the demonstration shall be carried by the tenderers
themselves. The decision of the TEC is final and binding on the tenderer with
regard to the acceptance of the technical bids and final technical evaluation
through demonstrations and no communication in this regard will be entertained.
The Financial bids of only those tenderers whose technical bids have been
accepted and have also qualified in the demonstrations will be opened on the
dates / times mentioned elsewhere in this document.
oo) TIME & PLACE OF OPENING BIDS: All bids, whether technical or financial
shall be opened in the Conference Hall of the hospital at 1100 Hrs, on the dates
stipulated elsewhere in this document. The time of demonstration of the
equipment shall be at 1000 Hrs., at the place as stipulated by the competent
authority, based on the requirements of demonstrations and other related issues.
However, the dates of demonstrations remain the same as mentioned elsewhere in
this document.
pp) SIGNING OF CONTRACT: The successful bidder will be required to enter into
an agreement with the hospital on a non-judicial stamped paper for the supply and
satisfactory installation and commissioning of the equipment as per specifications
and terms and conditions listed in this tender document and agreed upon. The
tenderer shall bear the cost of agreement and registration as required.
qq) TRAINING:The tenderer shall, after the satisfactory installation and
commissioning of the equipment, adequate training to the staff of the hospital at
site at no extra cost.
rr) OPERATING MANUALS: The tenderer shall provide the complete operating
manuals in English or Hindi or Kannada languages for the equipment supplied by
them. (Atleast English is a must)
ss) Warranty / Guarantee: The tenderer shall provide duly signed, dated, stamped
and authenticated Warrranty/Guarantee cards/documents, which shall come into
effect from the date of successful commissioning of the equipment to the
satisfaction of the hospital.
tt) UPTIME GUARANTEE: At the end of the warranty / guarantee period the
hospital shall enter into a CMC/AMC service contract with the tenderer. The
tenderer shall ensure during and after the warranty/guarantee/CMC or AMC
service contract that the equipment will be maintained in good working condition
for a period of 347 days out of a period of 365 days (i.e 95% Uptime). Nonfunctioning of the equipment for a period of 8 (eight) hours shall be considered as
one day down time. Essential period to shut down the equipment fully or partially
shall also be included in the down time while calculating the 95% guaranteed
uptime. No deduction or advantage of any kind on account of Sundays, half days
on Saturdays, public / Govt. holidays observed by the hospital shall be allowed
from the total down time permissible as defined above except that such of
Sundays, half days on Saturday, Pubic / Govt. holidays on which the hospital is
not able to provide facilities for service / repairs of the equipment shall be
excluded for counting the downtime. This guaranteed uptime shall be calculated
for each block of 365 days. The firm will be required to pay a penalty of
Rs1,000/- (Rupees One thousand only) per day in case the number of days of
downtime in each period of 365 days is more than the downtime permissible
which is to be calculated as defined above and the delay for not bringing the
equipment in functioning order is in any way directly or even partially attributable
to the tenderer.Further, the penalty will apply only for the number of days the
permissible down time as defined above is exceeded. For the purpose of
calculation of down time, any downtime period less than 8 hours shall be
excluded. During the CMC/AMC service contract period the time taken by the
hospital in providing to the firm the spare parts shall not count towards the
downtime. During the guarantee period the time taken by the hospital to provide
the custom's duty exemption certificate, Not Manufactured in India certificate,
Import License etc. for enabling the tenderer to import any spare part, shall not
count towards the downtime.
uu) TIME OF OPENING OF TENDER: The process of opening the technical and
financial bids and the times thereon are as stipulated elsewhere in this document.
The tenderer is at liberty to be present, in person or through their authorized
representative at the opening of the tender. In the event of the day of receipt and
opening of the tender being a holiday for hospital then due date for receipt of
completed tenders / opening of the tender will be the immediately following
working day at the same hour.
vv) VALIDITY OF TENDERS: The tenderers shall make their offers valid for
acceptance for a period of 180 days from the date of opening of the bids.
ww)
PAYMENT: The hospital will pay 90% of the CIF value excluding the
Agency Commission of the equipments to the tenderer through an irrevocable
Letter of Credit (LOC) against negotiable shipping documents or cheque drawn in
favour of the tenderer, as the case may be. The balance 10% of the payment will
be made after 3 months of satisfactory performance of the equipment.
xx) In case of imported equipment the country of origin will be only one. Any single
equipment having more than one country of origin will not be accepted by the
hospital. The cost of release of LOC by the foreign firm will be borne by the
tenderers. No amendment in LOC will be allowed, in deviation from the
conditions contained in the original tender.
yy) PAYMENT OF COMMISSION TO INDIAN AGENCIES FOR IMPORTED
EQUIPMENTS:The hospital shall make all reasonable and due efforts to pay the
Indian Agency Commission at the earliest possible date after 3 months of
satisfactory installation / commissioning & handing over of the equipment in
good working condition, besides training of the staff in operating the equipment.
The rate of exchange applicable for converting agency commission into
equivalent Indian Rupees shall be the T.T selling rate prevalent on the date of
releasing the documents by the Bankers. The Indian Agency Commission will be
paid in Indian Currency (Rupees) to the Indian Agents.
zz) PACKING & MARKING:Best in trade packing practices suitable for safe Rail /
Road / Air transit shall be used subject to packing and marking being acceptable
to the Inspecting Authority. The tenderer shall provide such packing of the goods
as is required to prevent their damage or deterioration during transit to their final
destination as indicated in the contract. The packing shall be sufficient to
withstand without limitation, rough handling during transit and exposure to
extreme temperature, humidity, mechanical shocks & vibrations, salt and
precipitation during transit and open storage, etc. The Packing case, size and
weights shall duly take into consideration, the remoteness of the equipment’s final
destination and absence of heavy handling facilities at all points in transit. The
packing marking shall show the description of the equipment/s, quantity, contents,
the name of the consignee and address, the gross weight, a distinctive number of
mark sufficient for the purpose of identification. Besides, each package shall
contain - the number and date of order, nomenclature of the goods, Schedule of
parts for each complete equipment giving part number with reference to assembly,
a packing note quoting the name of the purchaser.
aaa)
Not withstanding anything stated in the relevant clauses, the tenderer shall
be entirely responsible for any loss, damage, deterioration, depreciation of the
goods due to faulty packing.
bbb)
ARBITRATION: If at any time, any question, dispute or difference,
whatsoever, shall arise between the two parties (hospital on the one hand and
tenderer on the other hand) in relation to the purchase either of the parties may
give to the other a notice in writing of the existence of such a question, dispute or
difference and the same shall be referred to two arbitrators, one to be nominated
by the hospital and the other to be nominated by the tenderer. Such a notice of the
existence of any question, dispute or difference in connection with this purchase
shall be served by either party within 30 days of the beginning of such dispute
failing which all rights and claims shall be deemed to have been forfeited and
absolutely barred.
ccc)
Before proceeding with the reference/s of arbitration, the arbitrators shall
appoint / nominate an Authority, who shall be the Medical Superintendent of the
hospital. In the event the arbitrators do not agree among themselves on their
findings, the authority so nominated / appointed shall enter upon the reference and
his award shall be binding on both the parties. The venue of the arbitration shall
be at ESIC Hospital, 5th Main Road (FTI Campus) Yeshwanthpur Industrial
Suburb, Bengaluru – 560 022
ddd)
The provisions of the Indian Arbitration and Reconciliation Act 1996 and
of rules framed thereon, and any statutory modification thereof shall be deemed to
apply and be incorporated for the supply, installation and commissioning etc.
eee)
Upon every or any such reference, the cost incidental to the reference and
award (s) shall be at the discretion of the arbitrators or in the event of their not
agreeing, of the authority appointed by them, respectively, who may determine
the amount thereof and direct the same to be fixed as between solicitors and client
or as between parties and shall direct by whom and in what manner the same shall
be borne and be paid.
fff) JURISDICTION: The courts at Bengaluru alone will have the jurisdiction to try
any matter, dispute on reference between the parties arising out of the contract. It
is specifically agreed that no court outside shall have jurisdiction in the matter.
ggg)
FORCE MAJEURE: Any failure of omission or commission to carry out
the provisions of the contract by the tenderer shall not give rise to any claim by
any party, one against the other, if such failure of omission or commission arises
from an act of God, which shall include all acts of natural calamities such as fire,
flood, earthquake, hurricane or any pestilence or from civil strikes, compliance
with any statute and / or regulation of the Government, lockouts, strikes, riots,
embargo or from any political or other reasons beyond the tenderer’s control
including war (whether declared or not), civil war or state of insurrection,
provided that notice of the occurrence of any event by either party to the other
shall be given within two weeks from the date of occurrence of such an event
which could be attributed to Force Majuere conditions.
hhh)
TERMINATION FOR INSOLVENCY: The hospital may at any time
terminate the contract by giving written notice to the tenderer, without
compensation to them, if they became bankrupt of otherwise insolvent (which
events shall of themselves be a breach of the contract on the part of the tenderer),
provided such termination will not prejudice or affect any right of action or
remedy which has accrued or will accrue thereafter to the purchaser.
iii) TERMINATION FOR CONVENIENCE: The purchaser, may by written
notice sent to the tenderer, terminate the contract, in whole or in part, at any time
for his convenience. The notice of termination shall specify that termination is for
the hospital’s convenience in public interest. However, the equipment that are
ready for shipment within 30 days after the tenderer’s receipt of notice of
termination shall be purchased by the hospital at the contract terms and prices. For
remaining equipment, the hospital may choose to have any portion completed and
delivered at the contract terms and prices; and / or to cancel the remainder of the
supply order.
jjj) GOVERNMENT LANGUAGE:The contract shall be written in the language of
the Bid (English Language) as specified by the hospital. All correspondence and
other documents pertaining to the contract shall be in English or Hindi or
Kannada.
Medical Superintendent
ANNEXURE- 2
DETAILS OF THE TENDERER
Sl.N
o.
1
2
Particulars
Name of the Firm/Supplier
Postal Address with
Telephone No./Fax
No./Mobile No./E.Mail
Address
Annual Turnover for the last
three years
3
a. 2008-2009
b. 2009-2010
c. 2010-2011
4
5
CST/KST/VAT/PAN No.
a. Factory License No.
b. Shops &Estt. License
TO BE FILLED BY THE TENDERER
No.
c. Municipal/Local
authority License No.
(copy to be enclosed)
Details of EMD
6
7
a. DD/Bankers’ Cheque
No.
b. Name of the Bank
c. Branch
d. Amount
Whether Assessed under IT
Act.
If so, enclose IT returns for
the last three years
8
Names & addresses of other
hospitals, etc., to whom linen
is supplied
9
Whether service is provided
for 24 hours and on all days
10
Any other information
relevant to the subject
Declaration: I/We, hereby declare that the information as provided
above is correct & true to the best of my knowledge.
Place:
Date:
Name, Signature & Seal of the tenderer
Annexure - 3
UNDERTAKING
I/We, the undersigned tenderers / duly authorized signatory/ies
Shri/Smt.______________________________________________
of M/s________________________________________________
hereby undertake that the goods / stores / articles supplied to the
hospital under this contract shall be of the best quality and
workmanship and shall be strictly in accordance with the
specifications and particulars contained / mentioned in the clause
here of and I/We hereby guarantee that the said goods / stores /
articles conform to the description and quality aforesaid. The
hospital will be entitled to reject the said goods / stores / articles or
such portion there of as may be discovered not to conform to the
said description and quality. And on such eventuality, the goods /
stores / articles will be at my/our own risk & responsibility and all
the provisions here in contained relating to rejection of goods etc.
shall apply. I/we shall, if called upon to do so, replace within a
period of fourteen days or such time as may be stipulated by the
hospital at their discretion, the goods / stores / articles or such
portion there of as rejected by the hospital and in such an event the
above mentioned warranty/guarantee period shall apply to the
goods / stores / articles replaced from the date of the replacement
there of failing which, I/we shall pay to the hospital such damage
as may arise by reason of breach of the conditions here in
contained. Nothing herein contained shall prejudice any other right
of the hospital in this regard.
Name, Signature, Designation,
Stamp of the tenderer /
AuthorisedSignatory
ANNEXURE – 4
TO BE FILLED IN BY TENDERER AND RETURNED WITH THE TENDER
To:
The Medical Superintendent,
ESIC Hospital,
Sy.No.11-55-1, Plot No.1, 5th Main Road (FTI Campus),
Yeshwanthapur Industrial Sub-urb,
BANGALORE - 560 022.
Dear Sir,
Sub:
Your
advertised
No………………………………………………..,
medical equipment – Reg.
tender
enquiry
dated ……………………., for
We submit herewith our quote against your advertised tender enquiry, bearing
No…………………………………………………………………….,
dated:…………………, for linen items. We have carefully perused the Terms and
Conditions as stipulated therein and accept the same unconditionally.
(Firm’s Name & Address)
(Signature of Authorised Signatory)
WITNESS:
Signed in my presence.
Name :
Designation:
Seal:
Notary Public/Gazetted Officer
(with name & Complete Address)
Place:
Date:
EMPLOYEES’ STATE INSURANCE CORPORATION HOSPITAL
(Under Ministry of Labour& Employment, Govt. of India)
Sy.No. 11/55/1, Plot No.1, 5th Main (FTI Campus), Yeshwanthpur Industrial
Suburb, Bengaluru – 560 022
Telefax: No.080-23579467
No. 492/U/16/30/2012/Central Stores
To:
________________________________
________________________________
________________________________
________________________________
e-mail:esichpeenya@gmail.com
Dated:31. 07.2012
Application Cost
Rs1000/- (Non-refundable)
Dear Sir,
Sub: Your requisition for issue of tender documents for supply,
installation, commissioning & maintenance of Medical Equipment of
various departments – Reg.
Ref:
1. Our advertised tender enquiry of even no., dated………………
2. Your request letter bearing No…………………………, dated
………………...
*
*
*
With reference to above, please find enclosed a set of tender
documents alongwith all annexures.
Yours faithfully,
Stores Manager
Received:
A set of tender documents with all enclosures.
Name, Seal & Signature of the tenderer.
ANNEXURE - 5
EMPLOYEES’ STATE INSURANCE CORPORATION HOSPITAL
(Under Ministry of Labour& Employment, Govt. of India)
Sy.No. 11/55/1, Plot No.1, 5th Main (FTI Campus), Yeshwanthpur Industrial
Suburb, Bengaluru – 560 022
Telefax: No.080-23579467
No. 492/U/16/30/2012/Central Stores
e-mail:esichpeenya@gmail.com
Dated:31.07.2012
TECHNICAL SPECIFICATIONS OF MEDICAL EQUIPMENT
LABORATORY
No.492/U/16/30/2012/A(1)LAB
DIGITAL INCUBATOR
•
Temperature ranges from 5 degree C ambient to 80 degree C.
•
Outside to be made up of mild steel duly powder coated 2.5 thick glass wool insulation.
•
Double walled inside to be made up to stainless steel.
•
Digital temperature control with an accuracy of +/- 1 degree C.
•
Should include all circulating fan.
•
Perforated Adjustable shelves.
•
Digital Display of temperature.
•
Heating Element to be placed is ribs that the bottom and sides 13 size mating element.
•
To work with 230 V AC with on/off switch cord and plug.
•
Size 450X450X450 mm of chamber 2 (95 L).
•
Warranty for 2 Years.
•
Original Instrument not refurbished.
•
AMC to be provided and calibration to be given every year.
•
After sale service should be best in the industry with service Engineer/ Applications
Specialist based in Bangalore.
TRINOCULAR MICROSCOPE
No.492/U/16/30/2012/A(2)LAB




Universal Infinity Corrected Optical System.
Wide Field 10 X Plan eye pieces with Acromatic Objectives 2X,5X,10X,40X and100X.
Built in transmitted Kochler illuminater/LED type white light illumination.
X-Y Stage with double slide holder.










Focus control with course and fine focus facility.
Scratch Resistance Stage.
Trinocular, 30-35 degree viewing angle with inter pupillary adjustment.
Should be upgradable with facility for florescents, polorizer, phase contrast, dark field
condenser.
Digital Camera Attachment up to 10 Mega pixel live resolution CCD Sensor Size of 8.1
X 6.64 mm.
Universal Condenser.
Warranty for 2 years.
Original Instrument not refurbished.
User certificate to be given.
AMC to be provided.
SLIDE CABINET
No.492/U/16/30/2012/A(3)LAB




Stainless steel, rust proof.
Capacity 50,000 Slides.
Sturdy.
To be provided with lock and key.
BINOCULAR MICROSCOPE SPECIFICATION
No.492/U/16/30/2012/A(4)LAB















Infinity plan objectives 4X,10X,40X (SL) 100X (SL) Oil.
Eye piece WF 10X(FOV 22mm) Focusable type.
Anti-fungal treat, head free HEA Coated optic.
Single mould study ergonomic design stand.
Universal infinity optical system, quadraple reverse Non-piece.
Binocular head inclined at 30 degree scaled inter Papillary distance.
Illumination: LED/Halogen with controls and built in battery backups of approximately 2
hours.
Packed in styrofoam moulded box.
Smooth CAM technology co-axial control coarse and fine focusing.
Rackles X axis double plate stage, double slide holder.
X/4 to travel range 76x50 mm.
Abbe condenser NA 1.25 with aspheric lens and aperture iris diaphragm.
After sale service should be best in the industry with service engineer based in Bangalore
AMC to be provided and calibration to be given every six months.
CMC for 5 years and Warranty for 2 years.
HOT AIR OVEN
No.492/U/16/30/2012/A(5)LAB

















Internal size 45cm X45cm.
Door Single door.
No of shelves two adjustable at any Height.
Door filter on heavy brass heat and Chrome-plated hinges and brass west Chrome-plated
spring type lock handle.
Cabin: Inside made up of stainless steel.
Outside mild steel only powder coated to 2 1/2 “ filled by glass wood insulation.
Temperature ranges from 50 degree C to 150 degree C.
Temperature controlled by Hydraulic types.
Thermostat Knobs of which is graduated 50 degree C to 250 degree C.
Unit working on 220 V AC and control Panel have on/off.
Temperature display by mercury manometer on dial type thermometer and above digital
display.
Switch high/low switches indicator lamp and thermostat.
Heating elements in 3 sides.
Digital temperature controller and air circulation fan.
Instrument should not be refurbished.
After sale service should be best in the industry with service Engineer/ Applications
Specialist based in Bangalore.
AMC to be provided and calibration to be given every year.
CENTRIFUGE
NO.492/U/16/30/2012/A/(6)/LAB



















24 Bucket capacity.
Stepless spud regulator.
Safety lid interlock to prevent cover opening during centrifugation.
Digital speedometer, 0-60 '' digital countdown timing.
Brushlem induction motor with frequency device.
Stable speed out put even under unstable Voltage condition.
7 segment LED Display of speed.
Digital Countdown times.
Dynamic brake for quick acceleration.
Imbalance and Inverters fault detection with Auto shutdown.
Selection of 3 acceleration and deceleration profiles.
Recall of last set parameter. Useful for repetitive analysis.
Alpha, Numeric LCD display of speed.
Automatic door opening through gas hinges.
The Maximum rpm is 6000 rpm.
Capacity maximum 400 ml Max and 5070 g.
Warranty 2 years.
Instrument should not be refurbished.
After sales service should be the best in Industry with service Engineer/Application


specialist based in Bangalore.
AMC should be available, calibration certificates to be given every 6 months.
CMC for 5 years.
N0 492/U/16/30/2012/A/(7)/LAB
Semiautomated coagulation analyser

















Should be able to perform PT/APTT/TT/fibrinogen assay, clot based assay, D-dimer
Measuring system must be optomechanical
Measuring channels – dual channels
Mixing with magnetic stirrer motor
Tungsten light source
Two incubation block, incubation block temperature controlled at 37degree +/-1 degree
Reagent position 4, cuvette position 12
Back illuminate liquid crystal display (LCD)
Should have built in thermal printer
Should be able to detect even the smallest fibrin clot
Should provide certainty and uniformity in the INR values
After sales service should be the best in industry with service engineer/application specialist
based in Bangalore
AMC should be available, calibration certificate to be given every 6 months
To be supplied with UPS
CMC for 5 years
Demo kit reagents to be provided
PM kit every 6 months as per instrument requirement
B. GENERAL SURGERY
L.E.D Mobile Operation theater Light
No.492/U/16/19/2012/B(1)SURGERY








Illumination intensity at 1m /1Lakh.
Field size of 1m distance 20cm-25cm.
Working distance -120cm.
Focus adjustable by sterilizable handle.
L.E.D. Life time 50,000 hours.
Light rotation 360 Degree.
No of light modules-6.
Emergency Battery backup - 4hrs at least

I S O CERTIFIED
OT TABLE for MINOR O T
No.492/U/16/19/2012/B(2)SURGERY















SPECIFICATION:
Should be mobile, modular operating table for any surgery, electro hydraulic drive,
with corded hand control, with upper back plate, with leg plates, with head rest,
with SFC padding of 80 mm.
Electro mechanical adjustments
Height 760mm to 960 mm.
Trendlenberg/reverse trendlenberg,25/25 degree
Lateral tilt: 15 degree
Manual adjustments
a) standard back plate: + 90o/-450
b)standard head rest : + 450/ -450
back rest with gas spring up/down – 650/750
head rest detachable
leg rest detachable
standard four section mattress- one set
Accessories
a)arm board- two
b) anaesthesia screen - one
c) body strap - one
d) radial setting clamp- three
e) goepel knee crutches- two
f) perineal cut out filter – one
Base braking (lock/unlocking)
Shall meet IEC -60601- 1-2: 2001 or equivalent safety.
General requirement of safety for electro magnetic compatibility or should comply
with 89/ 366/EEC: E M C- directive.
Manufacturer should have ISO certification. Should be FDA, CE, UL or BIS
approved.
F.PEDIATRICS
NO.492/U/16/30/2012/F(1)/PED
ELECTRONIC DIGITAL WEIGHING SCALES
(i) Neonate



Electronic digital scale with a large pan with stable base. Capacity Upto 10 kg witha
provision for measuring height (Upto 50 cm) on the side.
Accuracy +/-1 gm. Large LCD display for reading. Easy to Clean.
Note for all scale weighing ,caliberation check should be done once half yearly at least
(ii) Infant and Child






Capacity – Upto 120 kg
Resolution 10 gm.
Accuracy + 1to 10 gm.
Measuring position supine, sitting and standing.
Large LCD Display.
Note for all scale weighing ,caliberation check should be done once half yearly at least
OPTHALMOSCOPE
NO.492/U/16/30/2012/F(2)/PED
Big handle with 2 big size cells with box case.
CUTANEOUS BILIRUBINOMETER
NO.492/U/16/30/2012/F(3)/PED







Measuring range 0.0 mg/dl to 20mg/dl
Standard error + or – 1 mg/dl, based on clinical data
hand held, light weight.
Should have internal rechargeable battery, lasting upto 500 measurements / charge
preferably nil consumables
easy to ready display mg/dl, μ mol/ L
Should confirm to IEC, CE standards
DOUBLE SURFACE CFL PHOTOTHERAPY UNIT
NO.492/U/16/30/2012)/ F(4)/PED
Unit should have CFL Lamp source in both upper and lower sides
(a) Upper surface

Microprocessor controlled with up, down side tilt facility and height adjustable.

6 CFL unit, 4 blue light & 2 white light.

Should have an irradiance level of more than 18µ w/em2/nm.

Chronometer to measure lamp usage.

Should have a wide base for rigidity.

Should have internal and external reflectors to avoid wastage of light rays by
sending uniform rays to the bed surface.
(b) Under Surface unit

Microprocessor controlled.

Irradiance 18µ w/em2/nm.

Energy efficient 6 CFL blue light.

Should have convenient baby bed with transparent acrylic fiber body leak proof
with transparent acrylic side railings.

Up& down tilt facility of bed should be available upto 30degree.

The lower surface should be detachable from the main unit so as to use under
radiant warmers.

One unit should be on movable wheels with brakes.

Should have internal & external reflectors designed to avoid wastage of light rays.
Microprocessor control for
1.Lamp usage. 2. Dose time 3. Feeding alarm 4.Display of set time.
5. Auto cut off. 6. Automate facility.
System should confirm to CE/IE standards and should be ISO certified.
NEONATAL OPEN CARE SYSTEM
NO.492/U/16/30/2012)/ F(5)/PED
Unit consisting of Warmer, n-CPAP (Optional), Pulse Oxymeter, Baby Weighing Scale
(Optional) and Motorized Height Adjustment.
EV Specifications

Operating temperature range 20º – 38 º C.

Operating Humidity range 0 – 100% RH.
Power requirements
 Voltage rating – 230 V.
Should have self setting microprocessor based servo control system. Skin temperature
probe should have

Range 26.4º C – 40º C.

Accuracy ± 0.2º C.

Resolution 0.1º C.

Probe interchangeability ± 0.2º C (Servo).

Infant required Temperature range (servo) 32º C – 38º C.

Should have following alarms:

Audio & Visual alarms.

High infant temperature.

Low infant temperature

Probe failure.

Heat failure.

Power failure.

Spo2 High and Low alarm, 1.

Battery Low alarm.

System failure with automatic heater cut off.
Heater Element

Single element quartz infrared heating element placed in a parabolic reflector.

Heater output control range (Manual) 0 – 100%.

Suction control should be provided.

Internal weighing scale (Optional).

Range 0 – 10 kg.

Accuracy 10 gm.

Should be provided with integrated Pulse Oxymeter (optional).

Oxygen saturation range: 1 – 100%.

Pulse rate range: 25- 250 BPM.

Should have an integral n-CPAP (Optional) with following features.

Should be supplied with bonnet and cap for correct fixation of nasal prongs.

Should be supplied with 3 sizes of prongs (Small, Medium and Large) at least one
each. Should be supplied with porper air and Oxygen blender and not air and
oxygen flow meter to mix gas.

Should be provided with PEEP Generator near baby to ease respiratory effort by
baby and reduce dead space.

Should be provided with digital manometer 0 -99 cm of H2O.

Should have I.V stand (Both side), Myo tray- 2 nos on same side Oxygen cylinder
index – optional.

Should have an oval shaped bed for greater accessibility and without crevices for
ease in cleaning.

Should have a firm antibacterial matters.

Should have LCD Graphical Display.

Should have the provision to take X rays with help of portable X-ray machine
without shifting the baby.

Equipment should confirm CE/IEC Standards and ISO certified.

Equipment should be movable with wheels and brakes.
RESUSCITATION WARMER
NO.492/U/16/30/2012)/ F(6)/PED

The unit is used for resuscitation of babies in labour ward/operation theater.

Should be a mobile unit mounted on at least 100mm castor.

Base of the unit should be built such that it allows the caregiver leg to move freely
below the bed of the unit without any hindrance.

The pillar supporting the control panel and heated unit should be on 1 corner of
the bed to allow free access on all four sides of the baby bed.

Should be able to swivel the heated unit to accommodate X-ray unit.

Infant bed should have provision for X-ray cassette holder the sides of bed should
have marking to enable easy positioning of X-ray cassette.

Should have integrated Halogen examination lamps.

Should have I.V pole.

Should have swivel able monitor tray.

Should have three different positions on the pillar to mount monitor tray.
The bed of the unit should be at least of following dimensions

Mattress size: 800X500X45mm.

Bed size: 830X520X210mm.

Side panel covering the bed should at least 110 mm above mattress.

Side panel should be easily removable for cleaning.

Should be able to tilt bed on either side max. 8 degrees and should be able to
position at any tilt as per the caregiver requirement

The wheels should be atleast four inches and with at least two lockable wheels.

Should have a tray and a draw for keeping essential of the baby, below the infant
bed.

Should have a APGAR timer that alerts every minute.

Should have a warmer controller with pre-warm and manual mode of operation.
Should indicate infant temperature with following specification

Range: 20 to 45 degree Celsius.

Accuracy: ± 0.2º C.

Resolution: ± 0.1º C.

Interchangeability: ± 0.1º C between sensors.

Manual mode of operation should be limited to 15 min at power above 80% to the
heater.

The unit should cut off heated to a safe level and trigger an alarm on elapse of 15
min in manual mode with power above 80%.
Should have a resuscitation unit with following specification

Oxygen outlet: 1 No.

Flow meter: 0 -12 lpm with 0.5lpm graduations.

Oxygen tube of 2 m length

Slow suction: 0 -200 mm Hg.

Adjustable with vacuum gouge indication

Poly carbonate jar with 600ml capacity.

Should work on venturi principle.

Autoclavable tubing to be provided.

Should be supplied with 1 No. patients skin temperature probe.

The mattress should be easily removable for cleaning and made of anti-bacterial
and flame retardant cover.

The manufacturer should have ISO 9001:2000 and ISO 13485 certification.
H.DERMATOLOGY
LIQUID NITROGEN CRYOJET MACHINE
NO.492/U/16/30/2012/H(1)/DERMA
 LIGHT WEIGHT
 HIGH QUALITY DEWAR FLASK
 ACCESSERIES=DIFFERENT PROBES=SHARP=BEWEL EDGE=FLAT=STRAIGHT
 Acne spray.=contact adopter with tips.
 Liquid nitrogen storage tank.
 Liquid nitrogen (-196 degree c) supply from local vendors.
 Regular maintenance.
GRAFT SPREADER AND DISSECTOR, DOUBLE ENDED
NO.492/U/16/30/2012/H(2)/DERMA
 Double ended
HIGH FREQUENCY RADIO – SURGERY UNIT - ELECTRO DIATHERMY
MACHINE
NO.492/U/16/30/2012/H(3)/DERMA
 Power required = 230V / 50Hz
 Dimensions (mm = 260 x 300 x 150)
 weight = 7 Kg
 Electrodes = Insulated
 Frequency = .20 – 2.93 μ Hz
 Cut = 70 % Cut, 30 % Loag
 Loag = 60 % Loag, 40 % Cut
 Fulgration = should be availabe
 Intensity Control = linear
 Standard accessories
 Monopolar handle = 1
 patient plate = 1
 Electrodes set = 1 (extra set for replacement to be given complimentary)
 Foot Switch = 1
 Carrying Case = 1
 Hand Switch = 1
 Bipolar cable and forceps = 1 no each

Maintenance to be done once / year
DARK FIELD MICROSCOPE
NO.492/U/16/30/2012/H(4)/DERMA
 Binocular microscope
 Dry dark field condenser
 30o inclined, 360 o swiveling ,compensation free binocular head
 3-D mechanical stage
 Intensity variable halogen illumination system
 40X – 2000X
NAIL EXTRACTOR AND DISSECTOR
NO.492/U/16/30/2012/H(5)/DERMA
 14 cm long
 Concave blades
ELECTRICAL TATTOO PENCIL MACHINE SET
NO.492/U/16/30/2012/H(6)/DERMA
 Very light weight
 Single/ double pin needle arrangement
 Battery backup facility
 Hand switch control
 Both press and do/auto switch available
 Pigments set
C. E.N.T
E.N.T Operating Microscope with Zoom and 5 step magnification changer
NO.492/U/16/30/2012/C(1)/ENT.






















Focusing system – internal, manual, continuously adjustable from 200mm to 415mm
Continuously adjustable via hand grip or foot control panel
Working length – 200mm to 415mm
Magnification – manual Galilean 1:6 in 5 steps
Optics – Apochromatic.
Main binocular tube – straight tube (0 degree) with 12.5 x or 10 x wide field eye pieces
Main illumination and back up xenon lamp fast action changer
Filters – UV/IR
Automatic lamp changer
Stand – floor stand
Voltage – 115V/230V
Frequency – 50 to 60 Hz
Power consumption - -115v max 10A, 230 V max 8 A
Automatic circuit breaker
Accessories
Stereo co – observation tube
Camera – suitable 3 chip CCTV camera
UPS 1000VA 6Amp / 1500 10 Amp
Desktop computer (branded) with 21” LCD medical grade monitor
Intel C2D 2.66 GHZ – 2GB RAM -/500 GB Hard disk DVD RW/n VIDIA 9300 GE,
512 MB dedicated Graphics/ LAN/Card reader/2.1 speaker / mike/ In built TV
Tunner card / Vista Home Premium/Multi Media key board/ mouse, wireless LAN /
Desktop trolley.
CLINICAL DIAGNOSTIC PURE TONE AUDIOMETRY
NO.492/U/16/30/2012/C(2)/ENT







Two channel audiometer
Pure tone ; channel 1 and 2
Frequency range
Air conduction :125 Hz to 12000Hz
Bone conduction :125 Hz to 12000 Hz
Speech:Channels 1 and 2
Microphone intensity range

















Masking intensity range
Signal format
Special test for cognition
Communications & monitoring
Automatic and manual tests
Print and store test automatically
Internal memory stores up to 250 tests & above
Test head set (TDH39P), bone vibrator, subject response hand switch, , free field speaker,
Accessories
Very good quality table with drawer to keep audiometer & accessories.
Revolving chair with back rest for audiologist.
Desktop Computer (Intel dual core 3.2GHz, intel mother board 9.75x, LCD monitor 17”,
HDD – 320 SATA, RAM 4GB, ATX cabinet, DVD rewriter, mouse, multimedia
keyboard,
2.1 speaker, card reader, mike, antivirus, windows 7 OS with compatible software).
Laser printer cum copier Large print out results (color printer) Fast print ( less than 20
seconds )
UPS
L.OPTHALMOLOGY
NO.492/U/16/31/2012/L(1)/OPTHAL
GOLDMANN APPLANATION TONOMETER









It should be Original Goldmann standard in IOP measurement
Must have Best reproducibility and accuracy
Should be having Measuring range from 0- 80mmHg
Measurement Divergence of the force impingement on the measuring prism over a
measuring range from 0-58.84Mn
Reverse Span < 0.49mN,
Net Weight should be 0.500kg or less
Should be compatible with Haag Streit/Type Slit Lamps
Reliable and durable,
Reusable Tonometers Prism should be supplied along with one extra prism
TECHNICAL SPECIFICATION OF A SCAN BIOMETER
NO.492/U/16/30/2012/L(2)/OPTHAL


Transducer Probe
Frequency :


Fixation


Sampling
Frequency :

10mhz ±
10%
Internal
LED
15.625
MHz ±
10%


IOL power Calculation formulas
SRK T
Haigis

SRK II
Hoffer Q

Holladay
Binkhorst I

Bandwidth :



Accuracy :
Electronic :
 ± 0.02mm
Sound Velocity/phakic status
functions
Anterior
 1533m/s
Chamber :
Normal lens:
 1641m/s
Vitreous :
 1532m/s
Aphakic :
 1532m/s
Cataract :
1629 m/s







>6mhz at 6db
IOL



PMMA :
Silicone :
Acrylic :




Automatic
Continuous
Manual
Calibration




Scan Memory is 10 per eye with
Standard Deviation of Axial
Length & Anterior:
Chamber Depth
User Memory :
Surgeon
 6 Profiles

IOL styles


2718m/s
1486m/s
2200m/s
Measurement modes









Software Memory
Patient
Memory
Analysis




Through External Thermal Printer (Optional)
Power
Voltage
 100-240VAC

Frequency:















Consumption :
 26VAC
Size :
Height :
 12 cm/5”
Width :
 30 cm /12”
Depth :
 28 cm/11”
Weight :
 2.6 Kgs.
Standard Accessories :
Solid tip transducer with fixation light
User Manual
2 spare fuses
RS 232 Port




10/surgeon
<100



10

AUTOMATED PERIMETRY
NO.492/U/16/30/2012/L(3)/OPTHAL
Peripheral Range 90º
Static Perimetry, DS, NS
Fixation Control & Pupil Measure
Print Out

50-60Hz
Head position recognition
Ethernet connection
Stimulus Sizes 111, V
Stimulus Sizes 1 – V
Expert Opinion ( Easterman test)
Kinetic Disability test
Automated Lens Holder
Lens Distance Control
EyeSuite Perimetry Lite
Standard white/white perimetry SAP
Dynamic ( Adaptive step size, 5-8 min)
Normal ( 4-2-1 bracketing, 8-12 min)
BT, BG, FG, Esterman
Country dependent static expert opinion Test
Country dependent automatic kinetic test
Custom Test ( individual test patterns)
Features:
Fixation ( Real time fixation & Blink Control)
Automatic Averaging pupil measurement
Non contact head recognition sensors
Ehternet access and PC software
One click testing ( follow up button)
Lens distance control
LVS ( Low Vision Goldmann V) 2-LT, 1-LT
Test Library:
G - Physilogical Glaucoma Test
M- Physiological Macular Test 5º/12 º /30 º
32, ST, LVC, 07, LVP, D1, N1, 30-2, 24-2, 10-2
Electrical & Mechanical Specifications
Power Requirements
100-120VAC/220-240VAC 50/60 Hz
Operating Temperature
+ 15º C … + 40º C
Light Source life span
>20’000 hrs for stimulus, background and
fixation
Conformity
CE:93/42/EEC, 89/336/EEC, conformity
module A CSA C & US
Measures ( W x L x H)
648mm x 519mm x 796mm
Weight
25 Kg
LED WIRELESS BINOCULAR INDIRECT OPHTHALMOSCOPE
NO.492/U/16/30/2012/L(4)/OPTHAL
IPD : Adjustable 47-75mm
d. Light Output : Rheostat control for illumination
e. Standard Accessories: Cobalt Blue, UV Filters green filter, teaching mirror, sclera
depressor, rechargeable battery pack , charger for battery, branded original case for IDO
Detachment charts, colour pencils 2 spare bulbs(LED/Halogen)
AUTOMATED LENSOMETER WITH PRINTER
NO.492/U/16/30/2012/L(5)/OPTHAL
Measurement range
Sphere
Spectacle lenses
0 to ± 25 D (0,10/0,12/0,25D steps)
Contact lenses
0 to ± 25 D(0.01/0.06/0.12/0.25D increment
Cylinder
0 to ± 10 D (0,10/0,12/0,25D steps)
Axis
1˚ to 180˚ (1˚ step)
Prism
0 to ± 20∆ (0,01/0,12/0,25∆ steps)
Addition
0 to + 10 D (0,10/0,12/0,25D steps)
Cylinder mode
Mix / - / +
Prism mode
X-Y (Orthogonal coordinates),
P-B (Polarcoordinates)
No display
Lens detection
Single / Progressive / Auto
Wavelength criterion
e-lined / d-line with ABBE compensation
Lens Diameter
Ø 5 to 100 mm
Screen
5, 7 inch/320x240 dots colour
Data display
S, C, A, P, Add, R/L Bar-meter, distance Rx, add power
PD-Measurement range( on
PD model only)
50-90 mm
External interface
RS232Cx2, USB(2.0)x1
Power supply
100-240V/50 VA (Auto shut-off in 10 minutes)
Dimensions
194(W)x 220(D)x408(H) mm
Weight
Approx.4kg
Drop-in fast printer
Thermal printer with auto cutter
Standard accessories
Power cord, Dust cover, Nosepiece for contact lenses,Printer paper,
Measuring progressive power lenses explanation sheet
Optional accessories
Eye care card, RS-232C communication cable, USB Cable (with
special USB driver), foot switch,
OPERATING MICROSCOPE( OPTHALMOLOGY)
NO.492/U/16/30/2012/L(6)/OPTHAL
Magnification changer
Focusing
Objective
Eyepieces
illumination
APO-chromatic 5-step-changer, motorized
Motorized, 40mm, adjustable speed
f = 200mm OPTIONS: 175mm, 225mm, or WD =
175mm, 200mm APO
10× / 21 B wide-field eyepieces for eye-glasses wearers
Diopter adjustment +/– 5 with adjustable eyecup
Halogen Homogenous, coaxial, integrated Red Reflex
illumination,
Sterile adjustment of light intensity by surgeon
Long-lasting -illumination free of UV and IR
2 free openings for selectable filters dia 32mm
Inclining mechanism +/– 15° manual fine adjustment
Adjustable speed for drives
Foot switch
XY-unit
Stand
Type
Base
Base dimension
Maximum load
Maximum reach
Minimum ight
Weight approx.
Accessories
Assistant’s attachment
Beam splitter
TV/photo
Asepsis
Electrical data
Supply
Protection class
8-Function foot switch, waterproof
upgradeable XY-unit
Positioning range 40 × 40mm with reset, adjustable
speed
Compact floor stand
Compact foot with 4 movable rollers, 4 foot brakes
608 × 608mm
3.5kg accessories on the microscope
1068mm
1680mm
100 kg minimum equipment
Stereo co-viewer, Monocular co-viewer
50/50% or 70/30%
2D video system, Zoom Video Adapter f = 35–100mm
Photo/TV dual attachment f = 60/85/107mm for TV, f =
250/350mm for 35-mm camera
TV attachment f = 107mm, Photo attachment f =
250/350mm
Sterilisable components for all controls
100–240 VAC, +/– 10%, 50/60 Hz/100 VA
Class I
I.CASUALITY
NO.492/U/16/30/2012/I(1)/Casualty
MULTIPARA METER BEDSIDE MONITOR

Should have TFT/LCD display 10.4” to 12” with wave form & numeric display. The
waveform should be user selectable.

Should be able to monitor ECG, SPO2,NIBP,,Temperature simultaneously,

Should be portable with carrying handle and weight not more than 5 K G with
battery,

Monitor should have built in lithium ion type battery for 4 hrs continous operation
in case of power failure.

Should have key for quick access to main functions.

Five lead ECG monitoring with lethal arrththmia recognition and capability for ST
analysis.

Should have respiration and apnea alarm.

Manual, auto & stat modes for NIBP monitoring and range should be 2 to 230 mm
Hg.

Should have separate volume control for beep sound QRS and alarm sound.

Facility for last 24 hours critical alarm review and facility for patient data entry.

Equipment performance should not be affected by electromagnetic fields or that
conducted through power lines from other devices.

Should work on 220 to 240 Volts/50Hz with in-built re-chargeable battery.

Should provide following accessories
a) Re-usable adult, pediatric SPO2 finger probes- one pair each at least.
b) Adult and pediatric NIBP cuff’s of different sizes - one pair each at least.

Should have safety certificate from a competent Indian authority or CE/FDA or
valid detailed and functional safety test report from ERTL, as the case may be.
Copy of the certificate / test report should be submitted along with the technical
bid.
K.MEDICINE
NO.492/U/16/30/2012/K(1)/MED
NEBULIZER
 Compact and heavy duty for hospital use
 Must be able to run continuously for 1 hour uninterrupted
 Must be easily portable
 Must be compressor type
 Electrical requirements : 220-240 VAC ,50 Hz
 Sound level not less than 60 db
 Air flow= 9 lpm
 Nebulization rate=0.15ml/min
 Nebulizer aerosol size=5 microns
 Compressor pressure =2 to 2.5 bar
 Operating temperature =+5 to +40 degree c
 Operating humidity = upto 95%
 Nebulizer capacity=6 ml
 Mode of operation =continuous
 Should comply with I EC 60601-1-2 or BIS equivalent
 Should work with Indian plug pin
 Should be supplied with English instruction guide
Warranty period must be 5 years.
M. ANAESTHESIOLOGY
NERVE STIMULATOR
NO.492/U/16/31/2012/M(1)/ANAS
Standby: A Standby switch maintains power to the instrument without generating stimulus pulses.
Twitch: 1 s (1 pulses/S); 2 Hz (2 pulses/S); 10s (1 pulse/10s).
Tetanus: 50 Hz (50 pulses/S); 100 Hz (100 pulses/s).
Stimulus Pulse: Square Wave Monophasic pulses (200 – U.S. Duration)
Stimulus Pulse: 22 milliseconds, square wave monophasic
Pulse Width: .30 millisec
Current: 0-35 millisec
Indicators: Battery LED indicater.
Power Source: 9-V alkaline battery (access door on rear panel)
Power Consumption: Approximately 15.5 Ma
Power Source: One 9-Volt battery
Voltage: 0-450 volts (open circuit)
Output Voltage: 450V ± 10%
Output: Adjustable with rotating potentionmeter
Case: High – impact ABS plastic with lexan overlay on membrane touch-switches 1.0” H x 2.42”
W x 3.88” D
Train of Four: (4 pulses/2 s); repeats every 10 secs
Output Current: 0 – 70 Ma, Adjustable in 0.1 – mA increments (HI Range
0-6.0 mA, ADJUSTABLE IN 0.1mA increments (LO Ranges).
Display Resolutions: 0.1 mA.
Dimensions: 5.5” long x 1.5”wide & 1” thick
Size: 2.09” Hx 3.60” W x 5.75” D.
Weight: 11 oz, including battery.
Warranty : 1 year, parts and labor.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Should have a current range from 0.1 to 5 mA.
Should have a resolution of 0.01 Ma
Should have a digital display for current.
Should have short stimulus pulse duration of 0.1 ms.
Should have a frequency range from 0.1 to 99 Hz.
Should be able to monitor single twitch, Train of four, PTC and DBC.
Should have integrated electrode cable with lead.
Should be battery operated.
Should be supplied with 5 sets of insulated needles in varied length.
Should have safety certificate from a competent authority CE / STQC CB certificate /
STQC S certificate or valid detailed electrical and functional safety test report from
ERTL. Copy of the certificate / test report shall be produced along with the technical bid.
N. ICU
NO.492/U/16/30/2012/N(1)/ICU
BIPHASIC DEFIBRILLATOR








.
.
Biphasic (fully automatic)
Waveform display
External energy from 2J TO 200J ,biphasic
changing time less than 8 seconds @ 200J (with a changed battery)
Synchronizer and cardiovession
Unique disarm button( in addition to automatic time delay)
Should come with higher resolution monitor
Should come with 3 lead ECG that can be measured from cables, adult external paddles,
pediatric paddles
 Heart rate:20 to 300 bpm with user selectable alarms
 Should come with extended pacing, demand and asynchronous modes
 Should display cpr in real time
 Should have large memory that stores and prints 25 ECG events
 Battery to last not more than 2 hrs of continuous ECG monitoring or 30 full energy
discharges.
 Battery indicator on display and self test on battery.
 Accessories needed:
a .Paddle with remote energy selection ,charge and discharge buttons on paddles.
b .Paediatric paddles adaptors(set of 2)
c .A/C 240 V TO 50 HZ charger and main power source, adult paddles and test paddles.
d.3 lead patient cable.
e.One spare battery
f. Roll of 50mm recording paper x 10 rolls
g .5 oz tube of defibrillator gel x 5 tubes
h.External disposable pacing pads 2 sets.
I.Operation manual , service manual complete.
SYRING PUMP
NO.492/U/16/30/2012/N/(2)/ICU





Accept all standard syringe of 10ml,20ml and 50ml.
Built in double CPU.
Powerful alarm system with both Audible and Visible alarms.
Water proof, Moisture proof, Anti-interference, Anti-high and low temperatures.
Injection rate 10 ml syringe-0.1/hour to 100 ml/hour. (incrant 0.1ml/hr)
20 ml syring-0.1ml/hr to 200 ml/hr.
50 ml syringe -0.1 ml/hr to 500ml/hr.

Bolus Rate 10 ml-100 ml /hr.
20 ml -200 ml/hr.
50 ml – 500 ml/hr.

Battery: Type – Lithium Polymel battery.
Life – > 2 hours continous running.
BLOOD GAS ANALYSER
NO.492/U/16/30/2012/N/(3)/ICU


















Fully automatic, fast & latest blood gas analyzer for the analyses of blood gases.
Measures pH, pCO2 , pO2, Hct, & Barometric pressure
Upgradable to measure Na+, K+ , Cl-, Ca++.
Calculated parameters which includes pH, pCO2 , pO2 at patient temperature, BE, BEact,
BEecf, BB, HCO3-, CtCO2, stHCO3-, stpH, ctO2, aH+, AaDO2, P50, Qs/Qt, a/Ao2, avDo2,
AG, OER, PAO2, Respiratory index, etc.
Direct aspiration of samples from syringe, capillaries, QC ampoules, Cups, Test tubes
with out the use of any adapters.
Sample volume – 75 ul max s
Sample throughput – 30 samples/hour
Fast analysis time – maximum 50 sec to results
Maintenance free electrodes including reference electrode with individual electrode
ON/OFF facility
Fully automatic liquid calibration of all parameters at user defined intervals without the
use of external gases, tanks & regulators.
Continuos reagent level monitoring with graphic display.
Automatic sample device recognition.
Data display on well illuminated LCD color touch screen display
Data printout on built in graphic printer with cutter.
Storage facility of measured data in case of power failure.
Built in data storage facility for at least 1000 patient & QC results and provision for
optional PCMCIA card.
Built in QC analysis software for Levy Jennings, West guard rule etc.
Built in barcode scanner.
FLUID/BLOOD WARMER
NO.492/U/16/30/2012/N/(4)/ICU







Numerical display for real time temperature/setting temperature.
Accuracy +/- 0.50o degree C.
Temperature setting : 33 degree to 42 degree C (adjustable at rate 0.1degree C)
High temperature cut – off :setting temperature +1 degree C/43 degree C/48 degree C+/3 degree C.
Low temperature alarm : Setting temperature – 1 degree C.
Uses normal transfusion/infusion tubing.
Recommended flow rate : 0 to 16 ml/min
D.OCCUPATIONAL THERAPY
DUAL-CHANNEL EMG
NO.492/U/16/30/2012/D(1)OCC.TH

Should be easy-to-use and portable

Surface EMG for single site, dual site and ratio (A/B) monitoring.

Should provide both easy-to-understand patient feedback and statistical information.
Audio: Patients should easily hear the changes in their EMG activity. Feedback should
be provided continuously, above threshold or below threshold.
Visual: Should provide easy-to-see visual feedback for each channel with bright LED
numerical.
EMG SPECIFICATIONS
Channels
Two Independent Channel
A Only, B only, A/B (ratio), A+B simultaneously
Visual Feedback-per channel
Display options
Numerical
LED only.
LED+lightbar,lightbar
Settings
0.5,1.0,2.0,4.0,6.0,10.0,60.0 seconds
LVA(last vaule attained)
Continuous,maximum,minimum
only,Numerical
Light bar range
15 segments,logarithmic scale corresponding to
threshold setting.
Audio Feedback -per channel
Tones
Piano,continuous,clicks,Raw
Volume
Levels 0 TO 7
Audio provided
Continuously,Above or below threshold,after 3 or 5
seconds
Statistics-per channel
Statistics aquired (summary)
Min,Min,Mean,SD,%SD,%time>or<threshold
Statistics aquired(intra-stats)
Choice
of
Min,Max,Mean,SD,%SD,%time>or<Threshold
Sampling Capacity
30 to 300 minutes of data(depending on the
sampling rate)
Intra-session data collection rate
0.5,1.0,2.5,or5.0 minutes.
Data Display Rate
2.5 seconds
4 Hz (every 0.25 seconds)of VRMS
Electrical-per channel
Resolution
0.10ŭV
Bandpass
24-425
Bandpass Rolloff
18 dB per octave
Common mode Rejection
120 dB
Notch Filter
60 Hz,25dB,(50 Hz option)
Differtial Input Impedence& input >1,000,000 megohms;0.3μV
noise
Leakage Current
In compliance with UL2601 specifications
Audio output
3.5 mm stereo earphone jack(mono output)
Analog output
Linear 0-3 volt DC signal,compatible with most
computer interfaces
Line power Input
120 volt,60 HZ,220V,50/60 Hz
Battery Longitivity Rating
10 to 12 hours continuous use
Battery Recharge
16 hours maximum with built-in overcharge
protection.
STANDARD ACCESSORIES








1 UL listed isolation adapter
2 Installed Ni-Cad rechargeable batteries
3 6-foot EMG sensor cable
4 Leather strap for ambulatory use
5 Quick-Stick pre-gelled, disposable EMG electrode sets
6 Top cover instruction label
7 Carrying case
8 User manual
FINGER DEXTERITY TEST
NO.492/U/16/30//2012/D(2)/OCC.TH






Light weight, portable, durable and storable after use.
Wooden material, should be laminated
Cabins for Tweezer S.S. Plain pins S.S.Screws, washers and nuts
Set should consist:
Laminated board has 100 holes to place in pegs & covered recess to store
parts.
Tweezer S.S.
Plain pins S.S.
Screws, washers and nuts.
CEREBRAL PALSY CHAIR
NO.492/U/16/30//2012/D(3)/OCC.TH





Cerebral Palsy chair should be made up of wooden material and polished.
Foam padded for seat, back rest, leg and foot rest and for forearm
support.
Straps should be provided for chest, hip,forearm, leg and foot.
Seat height, width and back rest should be adjustable.
Should be provided with caster wheels with lock for mobility and
stability
HAND DYNAMOMETER (ELECTRONIC, WALL MOUNTED)
NO.492/U/16/30/2012/D(4)OCC.TH


Hand-Grip Digital Dynamometer with electronic Strain-gauge
Should be suitable for routine screening work & evaluating max strength of subjects grip.


Unit should be wall mounted.
The sealed system should be with peak hold facility, register force in 1kg graduation
from 0 to 9kg, ensuring a high degree of accuracy.
HAND EVALUATION KIT (JAMER)
NO.492/U/16/30/2012/D(5)/OCC.TH
Hands-On-Hand Evaluation Set should include








JAMAR Hydraulic Hand Dynamometer
B & L Pinch Gauge (0-60 lbs.; 0-27 kg)
Small Joint Goniometer
6¾" E-Z Read Goniometer
Flexible Tape Measure
Finger Circumference Gauge (centimeters)
Semmes-Weinstein Monofilaments (Set of Five: 2.83, 3.61, 4.31, 4.56, 6.65)
DISCRIM-A-GON
HAND TAPPER TEST BOARD (ELECTRIC)
NO.492/U/16/30/2012/D/(6)OCC.TH




Should be in wooden material, laminated & durable.
Should have digital counter & timer to record the progress.
Heavy duty for hospital use.
Should be supplied with English instruction guide.
HAND TOOL TEST FRAME
NO.492/U/16/30/2012/D/(7)OCC.TH





The test should consist of tools & two uprights with bolts.
Container (Drawer) should be provide to store tools
Test should measure proficiency in using ordinary mechanics tools.
Should be in wooden material, should be laminated
Should be durable & portable.
PEG BOARD TEST (PURDUE PEG BOARD)
NO.492/U/16/30/2012/D/(8)OCC.TH
Measures gross movement of hands, fingers and arms and finger dexterity.
Should Include






Manual with instructions.
Normative data.
Record blanks.
A stopwatch.
Pins, Washers, and Collars.
Laminated & durable Pegboard.
SENSORY INTEGRATION AND PRAXIS TEST (SIPT)
NO.492/U/16/30/2012/D/(9)OCC.TH
Composed of the following 17 brief tests

















Space Visualization
Figure-Ground Perception
Standing/Walking Balance
Design Copying
Postural Praxis
Bilateral Motor Coordination
Praxis on Verbal Command
Constructional Praxis
Postrotary Nystagmus
Motor Accuracy
Sequencing Praxis
Oral Praxis
Manual Form Perception
Kinesthesia
Finger Identification
Graphesthesia
Localization of Tactile Stimuli.
ACTIVITY MATTRESS
NO.492/U/16/30/2012/D/(10)OCC.TH
Foam material covered with dark colour rexin with zip lock at one side.
 1 extra rexin cover.
 l X b X h = 190 X100 X 10 cms.
 Durable for heavy use.
ANKLE EXERCISER
NO.492/U/16/30/2012/D/(11)OCC.TH


Should hold the foot in a foot moulde
Straps to hold foot in place


Mounted on a laminated base with stainless steel sheet bracket having two springs for
ankle exercises
The resistance of these units can be increased further by tightening spring's nut.
CONTINUOS PASSIVE MOTION (UPPER EXTREMITY)
NO.492/U/16/30/2012/D/(12)/OCC.TH







CPM for MCP, PIP & DIP joints of index, middle, ring & little fingers.
Should be light weighted & user friendly
Forearm & wrist straps to secure the CPM while in action
Intermittent & continues movement option to be provided
Should be rechargable and comply with 240 V AC & Indian plug pin
Supplied with English instruction guide
Should be provided with guarantee & warranty
ERGOMETER –MX-1
NO.492/U/16/30/2012/D/(13)OCC.TH
Compact & heavy duty for hospital use

Must have training programs





Electronically controlled brake
Seat filled with gel, vertically and horizontally adjustable
Deep entrance
Load control independent of rotational speed
Transport rollers-at the front
Training computer with following features
Graphic representation of the load profileTraining evaluationPerformance into wattsChronometryEnergy consumptionTraining distanceSpeed-







Should have
Technical data
Performance: 25 to 400 watt

Loading capacity: 150 kg
MEDICINAL BALLS (1 – 5 KG)
NO.492/U/16/30/2012/D/(14)/OCC.TH




Must have wooden cabinet with shelf to hold five balls.
Should have out ward swing doors with glass panel and handles.
Balls must be made out of leather, securely stitched with strong leather cord.
Set of 5 balls in different sizes with 1, 2, 3, 4, 5 kgs each.
NIRMAL TABLE FOR HAND EXERCISER
NO.492/U/16/30/2012/L(15)OCC.TH
Hand exerciser must be



Hard-wood table with laminated top, size 24"x 30"x 30" high fitted with 6 pulleys in a
steel frame.
Leather loops and nylon cord passing through the pulleys with hanging weight
underneath for fingers hand, wrist and forearm exercises.
Supinator/pronator and wrist circumduction wheel for wrist exercises. Five sets of
weights, each set consists of 5 weights of one each of 100, 200, 300, 400 and 500 gms.
PEDDO CYCLE
NO.492/U/16/30/2012/D/(16)/OCC.TH







A motorized pedo cycle should have digital meter to display the workout.
Should be designed to improve movement range, muscle power and coordination ability
of limb joints.
Should come with resistance control mechanism
Should be compact and withstand for heavy duty
Light weight and portable
Should be provided with English user manual.
Should comply with Indian power standards- 220V Ac
SANDING UNIT OVERHEAD WITH STAND
NO.492/U/16/30/2012/D/(17)/OCC.TH





Should have heavy & wide based stand adjustable in height
Semi circulator wooden plank with 6" wide should be fitted in the stand.
Roller should be covered with emery cloth for resistance.
Seat with back rest should be provided
Whole assembly and chair should be fitted over a platform which should be non slippery
SANDING UNIT VERTICAL (WALL MOUNTING)
NO.492/U/16/30/2012/D/(18)OCC.TH

Wooden, wall mounting sanding unit with 20cm width x 100cm length fitted on an
angular metal frame for angle adjustment and should have six weight plates (1kg each)

for resistance and one sanding block.
Block should be covered with felt for resistance
SANDING UNIT WITH ADJUSTABLE INCLINE FOR RECIPROCAL EXERCISER
NO.492/U/16/30/2012/D/(19)/OCC.TH
Consists two wooden hinged planks


Upper plank's angle of inclination should be adjusted from horizontal to vertical position.
Two pulleys fitted at the top of 30cm wide upper plank for reciprocal hand-shoulder
exercises three sets of sanding hand blocks with different grasp holds to be provided with
the unit
 Unit should be made of wood & polished
specifications
 Upper plank. : 30cm x 100cm high with center divider with measuring tape.
 Lower plank. : 30cm wide with 6 slots to hold upper plank for angle adjustment.
Sand# blocks. : 3 pairs, with different grasp holds & clips to fix sandpaper
TILT TABLE (ELECTRICALLY OPERATED)
NO.492/U/16/30/2012/D/(20)/OCC.TH








Electrically operated to tilt the table.
Foam padded top.
Straps to hold the patient.
Heavy duty motor for silent and smooth lifting action with easy to operate control
switches.
Range: adjustable between 0 to 85 degrees.
Table top: 61cm wide x 198cm long x 80cm high.
Fitted on a heavy duty tubular steel frame with four locking wheels of 10 cm dia. for easy
mobility.
Work on 220V AC.
SWING VESTIBULO PROPRIOCEPTIVE EQUIPMENTS
NO.492/U/16/30/2012/D/(21)/OCC.TH
Large frame of iron railing for suspension of swings over it.
Net swing- 5 ft L x 2 ft W, strong nylon net. Edges having piping of canvas
cloth. ½”
diameter
4 nylon ropes, and 1” diameter 2 hooks for suspending swing.
Weight bearing capacity up to 55
kg.
Platform swing- 32” L x 17” W, 1” thick platform covered with Rexene/nylon.
Platform
to be suspended to the ceiling with ½” diameter 4 nylon ropes, 1” diameter 2
C-hooks. Weight
bearing capacity up to 55 kg.
Bolster swing – 8” diameter coir material cylindrical piece covered with
nylon/Rexene. 1” diameter circular hooks at each end. ½” diameter 2 nylon ropes and 1”
diameter 2 C-hooks,
55 kg.
for suspending the bolster to the ceiling. Weight bearing capacity up to
Hanging ladder – 1½” diameter 2 ropes, 16” L x 1” diameter wood sticks /steel
rods. 12” gap between each step of ladder. 6ft ladder hanging at least 4 ft above ground.
Weight bearing capacity up to 55 kg.
Trapeze swing – 4 ft L, 2” diameter, wood stick /steel rod suspended to ceiling
by 1½” diameter nylon ropes and 1” diameter C-hooks. Weight bearing capacity up to 55 kg.
Crash mat – 6 ft L x 4 ft W coir material mat, covered with nylon.
RAMP WITH CURBS
NO.492/U/16/30/2012/D/(22))/OCC.TH





Ramp should be of wooden material.
Upper surface of the ramp should be non slippery.
Angle of inclination: 2 inch raise for 1 foot length.
Length x Breadth: 7 ft x 2.5 ft.
Curbs are designed to be nested below the ramp at right angle.
BUBBLE BALL BATH
NO.492/U/16/30/2012/D/(23)OCC.TH



The round pool should be 120cm in diameter x 50cm high, & has 10cm thick padded
sides.
The pool must contain 500 multi colour balls of 7cm or 8cm diameter.
Pool side and bottom is covered with durable rexin that easily wipes clean and foam
padded.
JUMP- 200 (TRAMPOLINE)
NO.492/U/16/30/2012/D/(24)OCC.TH





Large trampoline with stand to hold while jumping.
With heavy duty frame and springs, 38” D x 9” H trampoline should be covered in vinyl
with reinforced stitching.
Stands should be unscrewed during storage.
Rubber feet for secure grip and protect floor.
Handle 36” W x 44”H. Weight bearing capacity up to 140 kg.
THERMOPLAST SHEETS –10 SHEETS
NO.492/U/16/30/2012/D/(25)OCC.TH

Thermoplastic sheets of 5mm thickness perforated type – 10 sheets of standard



size.
Degree of perforations: 38%.
Should have 100 percentage plastic memory.
Should be light/skin coloured.
SPLINT THERMAL BATH
NO.492/U/16/31/2012/D/(26)OCC.TH









Stainless steel splint thermal bath with split cover should hold an 18" x 24" sheet of
thermoplastic material.
Should be Water-resistant, illuminated on-off switch and digital LED temperature
controller.
Temperature adjustments from 140°F-180°F with preset temperature facility.
Internally insulated with microprocessor controls to ensure correct and constant
temperature.
Durable plastic handle to minimize contact with warm lid surface.
Drain valve, fuses and power cord should located at rear of appliance.
Should comply with Indian power standards- 220V Ac.
Should be supplied with max guarantee & warranty period.
Insulated & comply high standards.
FOAM PAD (ETHA FLEX) –10 SHEETS
NO.492/U/16/31/2012/D/(27)OCC.TH





3mm thick flex sheet – 10 sheets/1 roll of standard size.
Light or skin coloured.
Soft & durable to with stand constant pressure.
Supplied with one side pre adhesive & ready to use.
Compatible with thermoplastic material for binding with adhesive.
WHEEL CHAIR
NO.492/U/16/31/2012/D/(28)/OCC.TH






Should be light weight, folding type with removable armrests and swinging foot-rests.
Should be fitted with push breaks, which needs minimal effort by patient to stop the
wheel chair.
Removable armrests should be fitted with S.S. guard and P.U. rubber foamed.
Foldable and swinging footrests must be separately detachable and fitted with leg
supporting belt.
Multi directional caster wheels should be free to move and turn 180 degrees.
Hand rim should be non slippery to ensure better grip.
MULTI ACTIVITY WORKSTATION
NO.492/U/16/31/2012/D/(29)/OCC.TH







6 ft L x 4 ft W x 4 ft H teak wood box, with in-built shelves for storage.
3 hinged work surfaces- 2 at sides, 1 at front which can be closed back after use.
Work surfaces at sides should be 2 ft L x 4 ft W and 1½” gauge (thick).
Work surface at front should be 6 ft Lx 1½ ft W and 1½” gauge (thick).
Finely polished surfaces and rounded edges and corners.
Freely rotating ball wheels at each corner of box base.
It should contain- pinch tree, PVC pipe tree, 25 hole peg board, multi-shaped peg board,
bolt board assembly, finger dexterity board, door latch board, dressing board, shoulder
ladder, hand exercise board (Velcro), hand gym board activities
E. PHYSIOTHERAPY
HAND EXERCISER
NO.492/U/16/30/2012/E(1)PHY
Digi–flex hand exerciser develops isolated finger strength, flexibility and co-ordination while
building hand and forearm strength, 5 different resistance levels
UPRIGHT BI-DIRECTIONAL BIKE
NO.492/U/16/30/2012/E(2)PHY
 Display of no. minimum pedal RPM
 ISO-Strength program
 an accommodating resistance program should be there
 adjustable seat (hight + front back)
 Durable, maximum user weight 200 Kg
Display of energy expenditure in particular time and speed of exercise with user manual
****>>><<<****
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising