Simplicity Landlord 18HP, Hydro and 50" Mower Deck Manual

Parts Manual
Mfg. No: 1692007
Landlord 18HP, Hydro and 50" Mower
Deck
Copyright © Briggs & Stratton. All Rights reserved
19-Dec-2021
Attachments and Accessories
1691996 - 50" Mower Deck. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1692006 - Landlord 18HP, Hydro. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
2
n
o
19-Dec-2021
Table Of Contents
Model Components
Page
44" & 50" Mower - Clutch & Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
44" & 50" Mower - Deck, Arbors & Blades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50" Mower - Height Adjustment & Roller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clutch & Support Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Decal Group - Early Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electric Lift Assembly - Service Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electric Lift Kit, Mfg. No. 1692032 (Optional On Gear Models). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Group - Lower Harness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Group - Main Harness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Group - Electric Clutch - 16 & 18HP Briggs & Stratton - Early Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot Controls Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frame & Front Axle Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hand Controls Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hood, Grille & Dash Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Housing & Arbor Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydro Pump Service Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydro Transmission Service Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydro Transmission Service Parts - Diagram 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydro Transmission Service Parts - Diagram 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydro Transmission Service Parts - Diagram 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydrostatic Cam & Lever Group - Early Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydrostatic Cam & Lever Group - Later Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydrostatic Transmission, Pump & Pulley Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Seat, Deck & Fuel Tank Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steering Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheels & Tires Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Torque Specification Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
3
n
o
4
6
8
10
12
14
16
18
20
22
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
58
60
19-Dec-2021
44" & 50" Mower - Clutch & Support
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
4
Mfg. No: 1692007
n
o
19-Dec-2021
44" & 50" Mower - Clutch & Support
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
2106681SM
2157081SM
2167031
2812808SM
1601672SM
1656936SM
1665835
1666294SM
1674669SM
1676148SM
1677135ASM
1685150SM
1703836SM
1715759SM
1704658SM
1718561SM
1707432ASM
1707740SM
1715435SM
1916950SM
1916965SM
1919439SM
1921969SM
1923938SM
1924356SM
1924940SM
1931352SM
1931353SM
1960093SM
1
2
1
2
1
1
1
2
2
4
1
2
1
1
1
1
1
1
1
3
3
2
2
1
2
2
1
2
2
SPRING
SPACER
V-BELT, Deck Drive (44")
GREASE FITTING
V-BELT, Mower Drive (44")
SPRING
GRIP, Lever
SPACER
SPACER, .39 X 5/8 X 1.15
BUSHING
IDLER, Stop
PULLEY ASSY.
V-BELT, Arbor Drive, 50"
ROD, 3/8 x 8
LEVER ASSY, Idler (Incl. Qty 2, Ref. No. 10)
LEVER ASSY., Idler Arm (Incl. Qty 2, Ref. No. 10)
HITCH ASSY.
V-BELT, Mower Drive, 50"
SPRING
NUT, Hex, 3/8-16
LOCKWASHER, 3/8
NUT, Hex, Lock, 3/8-16
CAPSCREW, Hex Hd., 3/8-16 x 1-1/2
CAPSCREW, Hex Hd., 3/8-16 x 3-1/2
WASHER
WASHER, 5/16
BOLT, Carriage, Short Neck, 3/8-16 x 1-1/2
CARRIAGE BOLT, 3/8-16 x 1-3/4
NUT, Push On
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
5
u
d
i
t
c
n
o
19-Dec-2021
44" & 50" Mower - Deck, Arbors & Blades
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
6
Mfg. No: 1692007
n
o
19-Dec-2021
44" & 50" Mower - Deck, Arbors & Blades
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
11
12
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
32
33
34
35
36
37
38
39
40
2108202SM
1655729ASM
1655777SM
1656916SM
1656927SM
1657969SM
1664847SM
1672132SM
1685245SM
1685251SM
1685411SM
1687131SM
1685460SM
1687133SM
1700229SM
1700230SM
1703273ASM
1703601SM
1704100ASM
1704121ASM
1704123ASM
1704314SM
1720560SM
1704873SM
1723938SM
1705115SM
1705449SM
1706709SM
1707335SM
1708229ASM
1920397SM
1918199SM
1919326SM
2823471SM
2823471SM
1924856SM
1931318SM
1933263SM
1960353SM
1960518SM
1960545SM
6
3
3
3
3
3
18
3
3
3
1
1
1
1
3
3
3
1
3
1
2
3
1
1
1
1
1
1
3
3
2
3
1
2
3
7
2
3
2
1
1
BEARING
HOUSING, Arbor, Top
ADAPTOR, Blade
WASHER, Spring
WASHER, Spline
SHIELD, Bearing Upper, Arbor
SCREW, Hex, Taptite, 5/16 x 3/4
COLLAR, Mower Arbor
SHAFT, Arbor (Incl. Ref. No. 8)
SHAFT & BEARING ASSY. (Center & Outer)(Incl. Ref. Nos. 1, 9, & 27)
HOUSING ASSY., 44" (Orange)
HOUSING ASSY., 44" (Black)
HOUSING ASSY., 50" (Orange)
HOUSING ASSY., 50" (Black)
SHIELD, Grass, Bottom
WASHER, Shim
HOUSING ASSY., Arbor, Bottom (Incl. Ref. Nos. 15 & 20)
COVER, Arbor
BLADE, Mower, 16-1/8
PULLEY ASSY.
PULLEY ASSY., Deck Drive
GREASE FITTING
COVER, Arbor
CLAMP, Wire, 5/16 Diameter
SPRING
PLUG, Hole
DEFLECTOR, Plastic
ROD, Deflector
GASKET, Foam
BLADE, Mower, 50"
NUT, Hex, 1/4-20 ESNA
LOCKWASHER, 7/16
WASHER, 5/16
CAPSCREW, Hex Hd., 7/16-14 x 1-1/4
CAPSCREW, Hex Hd., 7/16-14 x 1
SCREW, Hex, Taptite, 5/16 x 1/2
CARRIAGE BOLT, 1/4-20 x 7/8
WASHER, Plain
WASHER, Flat
NUT, Push On
CAPSCREW, Hex Hd., 7/16-14 x 3-1/4
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
7
u
d
i
t
c
n
o
19-Dec-2021
50" Mower - Height Adjustment & Roller
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
8
Mfg. No: 1692007
n
o
19-Dec-2021
50" Mower - Height Adjustment & Roller
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
2118053SM
2153124SM
2172622SM
2816001SM
1664847SM
1665374SM
1668513SM
1677507SM
1704074ASM
1704080ASM
1704082SM
1704083ASM
1704086SM
1704087SM
1704094SM
1704097SM
1704114SM
1704116ASM
1722995SM
1706644SM
1706645ASM
1686687SM
1718828SM
1709195SM
1714084SM
1915726SM
1916950SM
1916965SM
1917356SM
1917372SM
1918452SM
1919381SM
1921977SM
1922606SM
1924361SM
1924366SM
1924940SM
1928352SM
1930644SM
1931202SM
1931352SM
1960093SM
1960170SM
1
2
1
1
6
3
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
2
2
2
2
2
1
1
2
1
1
10
1
1
2
2
1
1
1
PIN, Clevis
RING, Retaining
BOLT, Shoulder, 3/8-16 X 1.34, 1/2 Shoulder
PIN, Roll, 1" Long
SCREW, Hex, Taptite, 5/16 x 3/4
STRAP
ROLLER, .652 ID, 2.50 OD, 4.10 LG
SLIDE
BAR, Roller
PLATE, Mower Support
NUT, Hex Adjusting, 11/16
ARM, Rear, Mower, RH
TRUNNION
TRUNNION, Threaded
CRANK, Cutting Height
WASHER, Detent
INDICATOR, Cutting Height
BRACKET, Cutting Height
ROD, Adjustment
SPACER
TRUNNION
SHAFT ASSY., Roller, 50"
ARM ASSY., Mower
SPACER, .66 X 7/8 X 1 1/4
KNOB, Height Crank
NUT, Hex, Jam, 1/2-13
NUT, Hex Hd., 3/8-16
LOCKWASHER
LOCKWASHER, 5/16
NUT, Hex, 5/16-18
COTTER PIN
WASHER, Flat, 5/16
CAPSCREW, Hex Head, 5/16-18 x 1 1/4
CAPSCREW, Hex Head, 3/8-16 x 1-3/4
WASHER, Plain, 1/2
WASHER, 5/8
WASHER, Plain
NUT, Hex, Whizlock, 3/8-16
NUT, Hex Flange, Two-Way Lock, 1/2-13
SCREW, Hex, Washer, Taptite, 5/16-18 x 1-1/4
BOLT, Carriage, Short Neck, 3/8-16 x 1-1/2
PAL NUT
WASHER, 33/64
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
9
u
d
i
t
c
n
o
19-Dec-2021
Clutch & Support Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
10
Mfg. No: 1692007
n
o
19-Dec-2021
Clutch & Support Group
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
19
20
21
22
23
24
25
25
26
27
1665835
1916950SM
1916965SM
1924940SM
1921969SM
1685150SM
1656936SM
1931353SM
1674669SM
1676148SM
1715435SM
1677135ASM
1704658SM
2812808SM
1718561SM
1924356SM
1923938SM
1919439SM
1721532SM
1703836SM
2157081SM
1960093SM
1715759SM
1707432ASM
2106681SM
1601672SM
1707740SM
1666294SM
1931352SM
1
3
3
15
2
2
1
2
2
4
1
1
1
2
1
2
1
2
1
1
2
2
1
1
1
1
1
2
1
GRIP, Lever
NUT, Hex, 3/8-16
LOCKWASHER, 3/8
WASHER, 5/16
CAPSCREW, Hex Hd., 3/8-16 x 1-1/2
PULLEY ASSY.
SPRING
CARRIAGE BOLT, 3/8-16 x 1-3/4
SPACER, .39 X 5/8 X 1.15
BUSHING
SPRING
IDLER, Stop
LEVER ASSY, Idler (Incl. Qty 2, Ref. No. 10)
GREASE FITTING
LEVER ASSY., Idler Arm (Incl. Qty 2, Ref. No. 10)
WASHER
CAPSCREW, Hex Hd., 3/8-16 x 3-1/2
NUT, Hex, Lock, 3/8-16
V-BELT, Deck Drive (44")
V-BELT, Arbor Drive, 50"
SPACER
NUT, Push On
ROD, 3/8 x 8
HITCH ASSY.
SPRING
V-BELT, Mower Drive (44")
V-BELT, Mower Drive, 50"
SPACER
BOLT, Carriage, Short Neck, 3/8-16 x 1-1/2
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
11
u
d
i
t
c
n
o
19-Dec-2021
Decal Group - Early Models
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
12
Mfg. No: 1692007
n
o
19-Dec-2021
Decal Group - Early Models
REF NO
PART NO
QTY
DESCRIPTION
1
1
1
1
2
2
2
2
3
4
5
5
6
6
7
8
9
10
11
11
12
13
14
15
16
17
18
1704462
1708600
1708602
1708604
1704463
1708601
1708603
1708605
1709061
1709066
1713497
1708285
1707362
1704269
1707366
1721197SM
1704276SM
----1722790SM
1722789SM
1704277SM
1704473SM
----1704466SM
1722551SM
175216
1708927
1707948
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DECAL, Hood, L.H., GT Models
DECAL, Hood, L.H., 18 HP Landlord
DECAL, Hood, L.H., 16 HP Landlord
DECAL, Hood, L.H., 14 HP Landlord
DECAL, Hood, R.H., GT Models
DECAL, Hood, R.H., 18 HP Landlord
DECAL, Hood, R.H., 16 HP Landlord
DECAL, Hood, R.H., 14 HP Landlord
DECAL, Paint
DECAL, Belt, Blade
DECAL, Operating Inst. (Hydro models only)
DECAL, Operating Inst. (Gear models only)
DECAL, 14 GTG (GT models only)
DECAL, 16 GTH (GT models only)
DECAL, Push Valve (Hydro models only)
DECAL, Mower Height
DECAL, Danger (Hand Under Deck)
DECAL, OPEI
DECAL, Cutting Width, 50"
DECAL, Cutting Width, 44"
DECAL, Danger (Chute in Place)
DECAL, Grille, Hot
I.D. PLATE
DECAL, Choke (Dash), (Gear models only)
DECAL, Simplicity
DECAL, Lift Lever (Gear models only)
DECAL, Logo U.S.A.
ENGINE DECAL, (Gear models only)
-Not Shown
r
o
u
F
d
t
o
o
r
N ep
R
i
t
c
n
o
Footnotes:
Note:* Not a serviceable part.
Note:* Not a servicable part.
Copyright © Briggs & Stratton. All Rights reserved
13
19-Dec-2021
Electric Lift Assembly - Service Parts
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
14
Mfg. No: 1692007
n
o
19-Dec-2021
Electric Lift Assembly - Service Parts
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
1709104SM
1709105SM
1663966
1709106SM
1709107
1703531SM
1605773
1709108SM
1605778SM
1667788SM
1720713SM
1720713SM
1
1
1
1
1
1
1
1
1
1
1
1
BALL SCREW ASSY.
MOTOR & GEARBOX ASSY., 12 VDC, 17:1 Ratio
MOTOR KIT, 12 VDC
BRUSH & LEAD (Red)
BRUSH & LEAD (Black)
SEAL, Outer Tube (Top)
CAPSCREW, Taptite
SEAL, Inner Tube (Top)
PIN, Drive
GASKET, Housing
OUTPUT GEAR & SLIP CLUTCH ASSY.
GEAR ASSY., 2nd & 3rd
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
15
u
d
i
t
c
n
o
19-Dec-2021
Electric Lift Kit, Mfg. No. 1692032 (Optional On Gear Models)
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
16
Mfg. No: 1692007
n
o
19-Dec-2021
Electric Lift Kit, Mfg. No. 1692032 (Optional On Gear Models)
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
20
21
22
23
24
25
1706733SM
1701877SM
1926106SM
1919438SM
1714844SM
703570
1920415SM
1919439SM
1704712ASM
1706529SM
1923325SM
1708291SM
1960064SM
1918451SM
1706525SM
1911386SM
1960033SM
1708299SM
1672344SM
1707514ASM
1708088ASM
1930570SM
1919381SM
1922755SM
1708298SM
175838
1
1
1
4
1
2
2
2
1
1
6
1
1
1
1
1
2
1
1
2
2
2
4
1
1
1
POWER LIFT ASSY. (See next page for service parts)
BRACKET, Actuator
CAPSCREW, Hex, 5/16-18 x 3-1/4
NUT, Hex, Lock, Esna, 5/16-18
SUPPORT, Actuator
CAPSCREW, Hex Head, 5/16-18 x 1 1/4
CAPSCREW, Hex, Whizlock 3/8-16 x 1
NUT, Hex, Lock, Esna, 3/8-16
LIFT, Pivot Bracket
SUPPORT, Lift
CAPSCREW, Hex, 5/16-18 x 7/8
LIFT ARM ASSY.
PIN
PIN, Cotter
SHAFT ASSY.
WASHER, Plain
CLIP, Hair Pin
LIFT TUBE ASSY. (See note on illustration)
CLEVIS PIN
CHAIN, 3-Link
CHAIN, Lift, 4 Link
CAPSCREW, Hex, 5/16-18 x 1-1/2
WASHER, Plain
WASHER, Plain
PIN, Clevis
PIN, Clevis (Early models only)
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
17
u
d
i
t
c
n
o
19-Dec-2021
Electrical Group - Lower Harness
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
18
Mfg. No: 1692007
n
o
19-Dec-2021
Electrical Group - Lower Harness
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
3
4
5
6
7
8
9
10
11
12
13
14
15
1704379SM
1715635SM
1707234SM
1707297
1707232SM
1674358SM
1677370SM
1703946SM
1703249SM
1677371SM
1703248SM
1703945SM
1701011SM
2172434SM
1701229SM
1705921SM
1
1
1
1
1
1
2
2
1
2
1
1
1
1
1
1
SWITCH, Seat, Operator Present
WIRE ASSY., Seat Switch and Lift
HARNESS ASSY., Lower (All models except Mfg. Nos. 1692024, 1692033)
HARNESS ASSY., Lower (Mfg. Nos. 1692024, 1692033 Only)
WIRE ASSY., Engine Ground
WIRE ASSY., Headlight
SOCKET, Bulb
HEAT SHIELD
BEZEL, Headlight
BULB, Headlight ,12.8V
LENS, Headlight
HEADLIGHT ASSY. (Incl. Ref. Nos. 6-10)
TIE, Cable
CLIP, Speed
BUSHING, Snap, Small (Qty. 2 used on Briggs & Stratton engine)
BUSHING, Snap, Small (Kohler engine only)
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
19
u
d
i
t
c
n
o
19-Dec-2021
Electrical Group - Main Harness
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
20
Mfg. No: 1692007
n
o
19-Dec-2021
Electrical Group - Main Harness
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
1716332SM
1676130SM
1960369SM
1665238SM
1665237SM
1917356SM
1686734SM
1714055SM
1704346SM
1714054SM
1703972SM
1686981SM
1960728SM
1603618SM
1701521SM
1703799SM
1704614SM
1677296SM
1704349SM
1704112SM
1685215SM
1704581
1612103SM
1923341SM
1921319SM
1713163SM
1916964SM
1916622SM
1718596
2820263SM
1704632SM
2122023SM
1668819SM
1713500SM
1707007SM
1715138SM
1709188SM
1
5
7
1
1
2
1
1
1
2
1
1
2
1
1
1
1
1
2
1
1
1
1
2
6
1
2
2
1
2
2
1
1
1
1
1
1
38
1708208
1
39
1708207SM
1
40
1929477SM
2
* SWITCH, PTO, Electric Clutch
BULB, Indicator Light
SCREW, Plastite, #8-16 x 1/2
CIRCUIT BREAKER
WIRE ASSY.
LOCKWASHER 5/16
IGNITION SWITCH KIT (Incl. Ref. Nos. 8 & 10)
ADAPTER, Nut
COVER, Key Switch
KEYS
MODULE
SOLENOID
SCREW, Plastite, 1/4-20 x 5/8
CABLE, Battery-to-Solenoid
SWITCH, Transmission, Neutral Start
SWITCH, Headlight
STRAP, Wire Retainer
BOOT, Insulator
NUT, Plastic, 1/4-20
TRAY, Battery
BATTERY, 39 Amp (Power Max)
VENT, Battery
HOSE, Battery, Drain
CAPSCREW, Hex, 1/4-20 x 3/4
WASHER, Plain, 9/32
CABLE, Battery-to-Ground
LOCKWASHER, 1/4
NUT, Hex, Full, 1/4-20
HOLD DOWN, Battery
NUT, Hex, 5/16-24
ROD, Battery Hold Down
COVER, Terminal
CABLE, Solenoid-to-Starter
* HARNESS, Upper
SWITCH, Lift (Hydro only)
HOURMETER
PLUG, Dash
-Gear Models Only
HARNESS, Wiring
-Gear Models Only
SWITCH
-Gear Models Only
SCREW, Taptite 10-24 x 1/2
-Gear Models Only
r
o
u
F
d
t
o
o
r
N ep
R
i
t
c
n
o
Footnotes:
Note:* For units equipped with early style PTO switch (shown in illustration), order Wiring Harness Kit, part no. 1686623. Kit includes later style wiring harness (Ref.No. 34) along
with
connectors
part no. 1713513,
required
for use
with
early style
PTO .
Note:*
For units equipped
with early
style PTO
switch
(shown
in illustration),
order PTO Switch Kit, part no. 1686620. This kit includes the later style PTO switch (Ref.No. 1), along
with connector, part no. 1713508, required for use with early style
Copyright © Briggs & Stratton. All Rights reserved
21
19-Dec-2021
Engine Group - Electric Clutch - 16 & 18HP Briggs & Stratton - Early Models
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
22
Mfg. No: 1692007
n
o
19-Dec-2021
Engine Group - Electric Clutch - 16 & 18HP Briggs & Stratton - Early Models
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
1666268SM
1930531SM
1931338SM
1685699SM
1713844SM
2860171SM
2158475SM
1919438SM
1928919SM
1960728SM
1704335SM
2101025SM
2162085SM
1919381SM
1704344SM
1917356SM
1917372SM
1667346SM
1704343SM
1708587SM
2860112SM
1703956SM
1718678SM
----2171241SM
1708104ASM
1704419SM
1960407SM
1930598SM
1706692SM
1708264SM
1960458SM
1918199SM
1704357SM
1960368SM
1703971SM
1935255SM
1931342SM
1676183SM
1703986SM
1919326SM
703570
1707334SM
2834683SM
1960295SM
2820427SM
1924940SM
1707586SM
1
1
1
1
1
2
1
1
1
3
1
1
1
1
1
2
1
1
1
1
2
1
1
1
1
1
2
4
4
1
1
1
1
1
4
1
1
1
1
1
2
1
1
1
4
1
2
1
CABLE, Throttle
SCREW, Trusshead, 10-32 x 1/2
CARRIAGE BOLT, 5/16-18 x 1-3/4
HANDLE, Throttle (Incl. Ref. No. 4)
KNOB, Throttle
WASHER, Nylon
CLIP, Bowden Wire
NUT, Hex, Lock, Esna Light, 5/16-18
NUT ASSY., 10-32
SCREW, Plastite, 1/4-20 x 5/8
BRACKET, Throttle Mounting
WASHER
SPRING
WASHER, Plain, 5/16
CABLE, Choke Control
LOCKWASHER, 5/16
NUT, Hex, Full, 5/16-18
CAP, Oil
DRAIN, Oil
SPACER
CLAMP, Hose
SWITCH, Oil Pressure
HOSE, Fuel, 45.5" Long
ENGINE, Briggs & Stratton
KEY, Hi-Pro
PULLEY ASSY.
BELT STOP
SCREW, Metric
SCREW, Taptite, 3/8-16 x 1-1/2
ELECTRIC CLUTCH (Incl. Ref. Nos. 48-50)
WASHER
CAPSCREW, 7/16-20 x 4
LOCKWASHER, 7/16
DUCT, Lower Muffler
NUT, Pal, 1/4-20
MUFFLER ASSY.
NUT, Speed, Lug Type, 5/16-18
CARRIAGE BOLT, 5/16-18 x 2-3/4
CLAMP, Mumer
MANIFOLD, Exhaust
WASHER, 5/16
CAPSCREW, Hex Head, 5/16-18 x 1 1/4
DUCT, Upper Muffler
CLIP
SCREW, Flange Whiz, 1/4-20 x 5/8
LOCKWASHER, External Tooth
WASHER, Plain, 13/32
FIELD ASSY., Clutch
r
o
u
F
d
t
o
o
r
N ep
R
i
t
c
n
o
Footnotes:
Note:* See your local Briggs & Stratton distributor for parts and service.
Copyright © Briggs & Stratton. All Rights reserved
23
19-Dec-2021
Engine Group - Electric Clutch - 16 & 18HP Briggs & Stratton - Early Models
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
24
Mfg. No: 1692007
n
o
19-Dec-2021
Engine Group - Electric Clutch - 16 & 18HP Briggs & Stratton - Early Models
REF NO
PART NO
QTY
DESCRIPTION
49
50
1706692SM
1707587SM
1
1
ROTOR ASSY./ARMATURE KIT
SPRING & NUT KIT
r
o
u
F
d
t
o
o
r
N ep
R
i
t
c
n
o
Footnotes:
Note:* See your local Briggs & Stratton distributor for parts and service.
Copyright © Briggs & Stratton. All Rights reserved
25
19-Dec-2021
Foot Controls Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
26
Mfg. No: 1692007
n
o
19-Dec-2021
Foot Controls Group
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
1707428SM
1663114SM
1704295SM
1718944SM
1919326SM
1923360SM
1704429SM
1676374SM
1713855SM
1713480SM
1921319SM
2821133SM
1664022SM
1916950SM
1707213SM
1918451SM
1960020SM
1704420SM
1924940SM
1721133SM
1923701SM
1707288SM
1656054SM
2165068SM
1707192SM
1709951SM
1916965SM
1919439SM
1922755SM
1707677
1
4
1
1
2
1
1
1
1
1
1
1
1
2
1
2
1
1
3
1
2
1
2
1
1
1
2
1
1
1
SPRING, Torsion
BUSHING
BRAKE PEDAL ASSY.
PAD, Foot Pedal
WASHER, 5/16
COTTER PIN
CAM, Parking Brake
KNOB, Plastic (Mfg. Nos. 1692006, 1692036, 1692042, 1692044)
KNOB, Soft (Mfg. Nos. 1692440, 1692442, 1692446, 1692448,1692502)
ROD, Parking Brake
WASHER, Plain, 9/32
FITTING, Grease
GROMMET
NUT, Hex, Full, 3/8-16
IDLER ARM ASSY.
PIN, Cotter
WASHER, Plain, 21/32
KLIP RING, 5/8
WASHER, Plain, 13/32
PULLEY, Flat, Idler
CAPSCREW, 3/8-16 x 2
PULLEY, "V"
BELT STOP
SPRING, Tension
ROD, Clutch
ARM, Foot Pedal
LOCKWASHER, 3/8
NUT, Hex, Lock, 3/8-16
WASHER
TUBE, Closure
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
27
u
d
i
t
c
n
o
19-Dec-2021
Frame & Front Axle Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
28
Mfg. No: 1692007
n
o
19-Dec-2021
Frame & Front Axle Group
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1704310SM
1701229SM
1703968SM
1919439SM
1705921SM
1934654SM
1704351SM
1704311SM
2176440SM
1704314SM
2860530SM
1703475ASM
1718856SM
1960270SM
1708400
1707677
1
2
2
4
1
4
12
1
4
2
2
1
1
1
1
1
PAD, Footrest, R.H.
BUSHING, Snap
SUPPORT, Seat
NUT, Hex, Esna Lock, 3/8-16
BUSHING, Snap (Gear only)
CAPSCREW, Hex Whizlock, 3/8-16 x 1
FASTENER, Panel
PAD, Footrest, L.H.
BUSHING
GREASE, Fitting
WASHER, Special
AXLE ASSY., Front
AXLE PIVOT ASSY.
NUT, Hex, Full Lock, 3/4-16
FRAME ASSY.
PLUG, Button
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
29
u
d
i
t
c
n
o
19-Dec-2021
Hand Controls Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
30
Mfg. No: 1692007
n
o
19-Dec-2021
Hand Controls Group
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
2106681SM
1918447SM
1919326SM
1919438SM
1919381SM
1707307SM
2164094SM
1685492SM
1704428SM
2176440SM
1685700SM
1676743SM
1713843SM
1924361SM
1709236SM
1704620SM
1704332SM
1960020SM
1922127SM
1677746SM
1708360SM
1668737SM
1917372SM
1931317SM
1921319SM
1916964SM
1916622SM
1709140SM
1917356SM
1960206SM
1713100SM
1709043SM
1960044SM
1709166SM
1709211
1677746SM
1919438SM
1
3
1
3
3
1
1
1
2
1
1
1
1
2
1
1
1
2
1
1
1
1
2
2
2
2
2
1
2
1
1
1
2
1
1
1
1
SPRING, Extension
COTTER PIN
WASHER, 5/16
NUT, Hex, Lock, ESNA, 5/16-18
WASHER, Flat (Qty. 2 on later models)
ROD, Brake
ROD GUIDE ASSY.
SHIFT LEVER ASSY. (Early models only)
BUSHING, Plastic, 1/2 Dia.
BUSHING, Plastic, 3/4 Dia.
LEVER, Shift
KNOB, Plastic (Mfg. Nos. 1692006, 1692036, 1692042, 1692044)
KNOB, Soft (Mfg. Nos. 1692440, 1692442, 1692446, 1692448, 1692502)
WASHER, Plain (Qty. 1 on later models)
SPRING, Torsion (Early models)
BRACKET, Tension (See Note B on illustration page)
SPACER (Early models only)
WASHER, Plain, 21/32
SCREW, Hex Head Cap, 5/16-18 x 1 3/4
SPRING (Early models only)
SPRING, Compression
WASHER, Curved Spring
NUT, Hex, 5/16-18 (Later models only)
SCREW, Rd. Hd. Sq. Nk., 1/4-20 x 3/4
WASHER, Plain, 1/4
LOCKWASHER, 1/4
NUT, Hex, 1/4-20
WASHER, H.T.
LOCKWASHER, 5/16
WASHER
SPRING, Torsion
SPACER
WASHER, Plain, 5/16
SHIFT LEVER ASSY. (Later models only)
STUD
SPRING, Compression
NUT, Hex, Nylon Lock, 5/16-18 (See Note A on illustration page)
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
31
u
d
i
t
c
n
o
19-Dec-2021
Hood, Grille & Dash Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
32
Mfg. No: 1692007
n
o
19-Dec-2021
Hood, Grille & Dash Group
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
1719978SM
1707325SM
1707326SM
1714025SM
1
1
1
1
4
5
6
6
7
8
9
10
11
12
13
13
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
29
29
30
30
30
31
1686642SM
1960368SM
1930594SM
1960295SM
1921319SM
1715755SM
2176440SM
1925003SM
1960295SM
1719845SM
1704879CSM
1704879
31704879
2171600SM
1960096SM
1933896SM
1920397SM
1722006SM
1704927SM
1704342SM
1721203SM
1716128SM
1705249SM
1960373SM
1704626SM
1704628SM
1930601SM
1705248SM
1704878CSM
1704878
1704878DSM
1703240SM
1703240SM
1729505SM
1960430
1
10
2
2
2
1
1
8
20
1
1
1
1
2
2
2
10
1
1
2
1
2
2
2
2
2
2
2
1
1
1
1
1
1
2
32
1708202
2
33
1931317SM
2
34
1916964SM
2
35
1916622SM
2
36
1670675SM
2
37
1709188SM
1
SUPPORT, Bulkhead, R.H.
AIR DUCT
SEAL, Air Duct
DASH ASSY. (Gear models)
-Hydro Models, Mfg. Nos. 1692006, 1692036*, 1692042 & 1692044 order Dash
Kit, part no. 1686641. Gear Models, Mfg. Nos. 1692024 & 1692033 order Dash
Kit, part no. 1686643. Kit includes new style throttle & cable assy.
DASH ASSY. (Hydro models)
PAL NUT, 1/4-20
CAPSCREW, Whizlock, 1/4-20 x 3/4 (Hydro models)
CAPSCREW, Whizlock, 1/4-20 x 5/8 (Gear models)
WASHER, Plain, 1/4
DASH, Lower
BUSHING, Nylon
SCREW, Taptite, 1/4-20 x 1/2
CAPSCREW, Whizlock, 1/4-20 x 5/8 (Qty. 18 on gear models)
SUPPORT, Bulkhead, L.H.
SIDE PANEL ASSY., L.H. (Orange)
SIDE PANEL ASSY., L.H. (Green)
SIDE PANEL ASSY., L.H. (Red)
STRAP, Hood
WASHER, Special
NUT, Hex, Lock, Nylon #10-24
NUT, Hex, Full Lock, 1/4-20
BULKHEAD
GROMMET, Wire Harness
GROMMETS, Bulkhead (Qty. 1 on hydro models)
GRILLE
HINGE, Hood
SPACER
SCREW, Taptite, 5/16-18 x 1
SPACER, Hood
CLIP, Hairpin
SCREW, Taptite, 5/16-18 x 5/8
PIVOT, Hood
SIDE PANEL ASSY., R.H. (Orange)
SIDE PANEL ASSY., R.H. (Green)
SIDE PANEL ASSY., R.H. (Red)
HOOD (Orange)
HOOD (Green)
HOOD (Reds
CAPSCREW, 1/4-20 x 1, Hex Washer Hd.
-Gear Models Only
BRACE, Dashboard
-Gear Models Only
CARRIAGE BOLT, 1/4-20 x 3/4
-Gear Models Only
LOCKWASHER, 1/4
-Gear Models Only
NUT, Hex. Full, 1/4-20
-Gear Models Only
PLUG, Bumper
-Gear Models Only
PLUG, Dash, Electric Lift
-Gear Models Only
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
33
u
d
i
t
c
n
o
19-Dec-2021
Housing & Arbor Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
34
Mfg. No: 1692007
n
o
19-Dec-2021
Housing & Arbor Group
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
22
23
24
25
26
26
26
26
27
28
29
30
31
32
33
34
35
36
37
38
39
2823471SM
1918199SM
1933263SM
1704123ASM
1657969SM
1655729ASM
1685245SM
2108202SM
1685251SM
1930585SM
1704121ASM
1703273ASM
----1704314SM
1924856SM
1720560SM
1664847SM
1700230SM
1700229SM
1655777SM
1672132SM
1704100ASM
1708229ASM
1656927SM
1656916SM
2823471SM
1685411SM
1687131SM
1685460SM
1687133SM
1931318SM
1705115SM
1703601SM
1960518SM
1960353SM
1704873SM
1919326SM
1723938SM
1916964SM
1916622SM
1706709SM
1705449SM
1707335SM
2
3
3
2
3
3
3
6
3
1
1
3
3
3
7
1
18
3
3
3
3
3
3
3
3
3
1
1
1
1
2
1
1
1
2
1
1
1
2
2
1
1
3
CAPSCREW, Hex Hd., 7/16-14 x 1-1/4
LOCKWASHER, 7/16
WASHER, Plain
PULLEY ASSY., Deck Drive
SHIELD, Bearing Upper, Arbor
HOUSING, Arbor, Top
SHAFT, Arbor (Incl. Ref. No. 21)
BEARING
SHAFT 8 BEARING ASSY. (Center & Outer) (Incl. Ref. Nos. 7, 8, 8 39 )
CAPSCREW, Hex Hd., 7/16-14 x 3-1/2
PULLEY ASSY.
HOUSING ASSY., Arbor, Bottom (Incl. Ref. Nos. 13 & 14)
HOUSING, Arbor, Bottom (See Ref. No. 12)
GREASE FITTING
SCREW, Hex, Taptite, 5/16 x 1/2
COVER, Arbor
SCREW, Hex, Taptite, 5/16 x 3/4
WASHER, Shim
SHIELD, Grass, Bottom
ADAPTOR, Blade
COLLAR, Mower Arbor
BLADE, Mower, 16-1/8
BLADE, Mower, 50"
WASHER, Spline
WASHER, Spring
CAPSCREW, Hex Hd., 7/16-14 x 1
HOUSING ASSY., 44" (Orange)
HOUSING ASSY., 44" (Black)
HOUSING ASSY., 50" (Orange)
HOUSING ASSY., 50" (Black)
CARRIAGE BOLT, 1/4-20 x 7/8
PLUG, Hole
COVER, Arbor
NUT, Push On
WASHER, Flat
CLAMP, Wire, 5/16 Diameter
WASHER, 5/16
SPRING
LOCKWASHER, 1/4
NUT, Hex, 1/4-20
ROD, Deflector
DEFLECTOR, Plastic
GASKET, Foam
r
o
u
F
d
t
o
o
r
N ep
R
i
t
c
n
o
Footnotes:
Note:* Not serviced seperately, order complete Housing Assembly.
Copyright © Briggs & Stratton. All Rights reserved
35
19-Dec-2021
Hydro Pump Service Parts
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
36
Mfg. No: 1692007
n
o
19-Dec-2021
Hydro Pump Service Parts
REF NO
PART NO
QTY
DESCRIPTION
1
1707913SM
1
2
1707914SM
1
3
1707915SM
1
4
1707916SM
1
5
1707917SM
1
6
1707918SM
1
7
1707919SM
1
8
9
10
11
12
13
14
15
16
17
1707920
1707921SM
1707922SM
1707923SM
1707924
1706179SM
1707925SM
1707926SM
1706176SM
1706183SM
1
1
1
1
1
2
2
8
1
4
1715282SM
1707928SM
1
2
1706182SM
1706184SM
1707929SM
1707930SM
1706190SM
1706191SM
1
1
1
1
1
1
26
27
1706188SM
1706187SM
1
1
28
1708100SM
1
29
1708101
1
30
31
1708103SM
1707931SM
1
1
RETAINING RING
-Included in Overhaul Seal Kit (1707931), Ref. No. 31
SPACER
-Included in Overhaul Seal Kit (1707931), Ref. No. 31
SEAL
-Included in Overhaul Seal Kit (1707931), Ref. No. 31
SEAL
-Included in Overhaul Seal Kit (1707931), Ref. No. 31
LIP SEAL
-Included in Overhaul Seal Kit (1707931), Ref. No. 31
GASKET, Center Section
-Included in Overhaul Seal Kit (1707931), Ref. No. 31
O-RING, Rubber
-Included in Overhaul Seal Kit (1707931), Ref. No. 31
CHARGE PUMP HOUSING
GEROTOR ASSEMBLY
SPRING
BALL
PIN
BOSS PLUG, O-Ring
SCREW, M8 x 20
SCREW, M8 x 35
PIPE PLUG
O-RING, Rubber
-Included in Check Valve Kit (1708103), Ref. No. 30 Included in Overhaul Seal
Kit (1707931), Ref. No. 31
CHECK VALVE KIT (Incl. Ref. Nos.17, 19, 20, 21)
SPRING
-Included in Check Valve Kit (1708103), Ref. No. 30
CHECK VALVE PLUG
BALL
BY-PASS VALVE KIT (Incl. Ref. Nos. 23-27)
BY-PASS SPOOL
BY-PASS PLUG
O-RING
-Included in Overhaul Seal Kit (1707931), Ref. No. 31
SPRING
O-RING, Rubber
-Included in Overhaul Seal Kit (1707931), Ref. No. 31
PLUG
-Included in Check Valve Kit (1708103), Ref. No. 30
POPPET, Orifice
-Included in Check Valve Kit (1708103), Ref. No. 30
CHECK VALVE KlT, Poppet (Incl. Ref. Nos. 17, 19, 28, 29)
OVERHAUL SEAL KIT (Incl. Ref. Nos. 1-7, 17, 25, 27)
18
19
20
21
22
23
24
25
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
37
u
d
i
t
c
n
o
19-Dec-2021
Hydro Transmission Service Parts
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
38
Mfg. No: 1692007
n
o
19-Dec-2021
Hydro Transmission Service Parts
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
1707784SM
1707782SM
1707776SM
1707903SM
1707870SM
1707783SM
1707889SM
1707890SM
1707777SM
1707778SM
1707786SM
1707905SM
1707860SM
1707855SM
1707904SM
1707902SM
1707789SM
1707779SM
1707785SM
1707871SM
1707887SM
1707888SM
2
2
2
1
1
2
1
2
1
1
1
1
4
2
1
1
12
1
1
1
1
1
BEARING, Needle
RING
SEAL
SHAFT, Axle, Right
HOUSING, Transaxle, Right
PIN, Roll
LEVER ASSY., Range
SCREW, Taptite
FITTING
CAP, Oil
PACKING
BEARING
WASHER
RING
BEARING
SHAFT, Axle, Left
SCREW, Taptite
PLUG
PACKING
HOUSING, Transaxle, Left
GEAR SET, Idle
SHAFT, Idle
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
39
u
d
i
t
c
n
o
19-Dec-2021
Hydro Transmission Service Parts - Diagram 2
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
40
Mfg. No: 1692007
n
o
19-Dec-2021
Hydro Transmission Service Parts - Diagram 2
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
1707876SM
1707873SM
1707880SM
1707877SM
1723214SM
1707875SM
1707874SM
1707879SM
1707891SM
2860444SM
1921319SM
1916964SM
1
1
2
2
4
1
4
4
1
2
2
2
FITTING
OIL FILTER
BOLT
COLLAR
CLAMP, Hose
TUBE, Suction
ELBOW
PACKING
TUBE, Drain
BOLT
WASHER, Flat
LOCKWASHER
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
41
u
d
i
t
c
n
o
19-Dec-2021
Hydro Transmission Service Parts - Diagram 3
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
42
Mfg. No: 1692007
n
o
19-Dec-2021
Hydro Transmission Service Parts - Diagram 3
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1707872SM
1707803SM
1707809SM
1707885
1707886SM
1707882
1707884SM
1707881SM
1707883
1707901SM
1707899SM
1707900SM
1707906SM
1707909SM
1707908SM
1707911SM
1707910
1707907SM
1707869
1707912SM
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
4
1
SEAL
SHIM SET
BEARING
REDUCTION SHAFT ASSY.
BEARING
MOTOR GEAR, Spiral, 19 Tooth
BEARING
COLLAR
RING
BEARING
SHAFT, Final Pinion
GEAR, Final Shaft, 24 Tooth
BRAKE ASSY. (Includes Ref. Nos. 14 thru 18)
SHAFT, Cam Lever
COVER, Brake
RING
SHOE SET, Brake
DRUM, Brake
BOLT, w/Washer
RING
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
43
u
d
i
t
c
n
o
19-Dec-2021
Hydro Transmission Service Parts - Diagram 4
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
44
Mfg. No: 1692007
n
o
19-Dec-2021
Hydro Transmission Service Parts - Diagram 4
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
1707846
1707845SM
1707897SM
1707893SM
1707894SM
1707895SM
1707848SM
1707892SM
1707896SM
1707898SM
2
2
6
2
2
1
2
1
6
6
GEAR SET, Differential
WASHER
BOLT
CASE ASSY., Differential (Includes Ref. No. 5)
BEARING
GEAR SET, Final, 59 Tooth
WASHER, Differential Pinion
SHAFT, Differential Pinion
WASHER
BOLT
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
45
u
d
i
t
c
n
o
19-Dec-2021
Hydrostatic Cam & Lever Group - Early Models
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
46
Mfg. No: 1692007
n
o
19-Dec-2021
Hydrostatic Cam & Lever Group - Early Models
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
1918447SM
1924361SM
1921977SM
1919381SM
1709208SM
2171371SM
1917356SM
1917372SM
1709703SM
1709703SM
1709703SM
1931338SM
1960151SM
1921159SM
1707053SM
1708082SM
2817579SM
1916622SM
1916964SM
1921319SM
1707317SM
1707152
1950018SM
960446
1707188
1931317SM
1707296SM
1960457SM
1713280SM
1920397SM
960464
1707132SM
1919326SM
1704739SM
2
2
1
5
1
2
3
2
4
2
2
1
2
1
1
1
1
2
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
PIN, Cotter
WASHER, Plain
CAPSCREW, Hex Head, 5/16-18 x 1 1/4
WASHER, Flat
ROD, Shift
SPACER
LOCKWASHER, 5/16
NUT, Hex 5/16-18
WASHER, Nylon
BEARING, Needle
SPACER, Cam, Control
CARRIAGE BOLT, 5/16-18 x 1-3/4
WASHER, Flat
CAPSCREW, Hex Hd., 1/4-20 x 2-1/4
RETAINER, Ball
SPRING
BALL
NUT, Hex 1/4-20
LOCKWASHER, 1/4
WASHER, Flat 1/4
SPACER
BRACKET, Detent Support
SCREW, M8 - 1.25 x 20mm, Hex Head
NUT, Hex 6 mm-1.0
LEVER, Speed Control
CARRIAGE BOLT, 1/4-20 x 3/4
CAM, Neutral Return
RING, Retaining
ROD, Return-To-Neutral
NUT, Hex, Lock ESNA 1/4-20
CAPSCREW, Hex, 6 mm-1.0 x 51 mm
CAM, Control-Directional
WASHER, 5/16
TIE, Self-Locking
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
47
u
d
i
t
c
n
o
19-Dec-2021
Hydrostatic Cam & Lever Group - Later Models
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
48
Mfg. No: 1692007
n
o
19-Dec-2021
Hydrostatic Cam & Lever Group - Later Models
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
1918447SM
1924361SM
1921978SM
1919381SM
1709208SM
2171371SM
1917356SM
1917372SM
1709703SM
1709703SM
1709703SM
1931338SM
1960151SM
1921159SM
1709703SM
2821133SM
1923358SM
1916622SM
1916964SM
1960353SM
1708183SM
1709333SM
1950018SM
960446
1709204SM
1931323SM
1707296SM
1960457SM
1713280SM
1920397SM
960464
1707132SM
1713278
1704739SM
1922837SM
1919438SM
1921319SM
1709329SM
1709330SM
1709337SM
1708554SM
1709331SM
1709314SM
2
2
1
6
1
2
2
1
4
3
2
1
2
1
3
1
3
3
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
PIN, Cotter
WASHER, Plain
CAPSCREW, Hex Head 5/16-18 x 2 G5
WASHER, Flat
ROD, Shift
SPACER
LOCKWASHER, 5/16
NUT, Hex, 5/16-18
WASHER, Nylon
ROLLER, Cam
SPACER, Cam, Control
CARRIAGE BOLT, 5/16-18 x 1-3/4
WASHER, Flat
CAPSCREW, Hex, 1/4-20 x 2-1/4
ROLLER, Cam
FITTING, Lube 1/4
NUT, Hex, Center Lock, 1/4-20
NUT, Hex, 1/4-20
LOCKWASHER, 1/4
WASHER, Flat, 1/4
SPACER
BRACKET, Control Support
SCREW, M8 - 1.25 x 20mm, Hex Head
NUT, Hex, 6 mm-1.0
LEVER, Speed Control
CARRIAGE BOLT, 1/4-20 x 2
CAM, Neutral Return
RING, Retaining
ROD, Return-To-Neutral
NUT, Hex, Lock ESNA 1/4-20
CAPSCREW, Hex, 6mm-1.0 x 55 mm
CAM, Control-Directional
SPACER, 5/16 x 1/8 O.D. x 3/4 Long
TIE, Self-Locking
CAPSCREW, Hex, 1/4-20 x 1-1/2
NUT, Hex Lock ESNA 5/16-18
WASHER
LEVER, Neutral Adj.
PIVOT, Adj. Lever
PIN, Pivot
RING, Retaining, Ext. 3/8
ARM, Neutral Roller
SPRING, Extension
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
49
u
d
i
t
c
n
o
19-Dec-2021
Hydrostatic Transmission, Pump & Pulley Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
50
Mfg. No: 1692007
n
o
19-Dec-2021
Hydrostatic Transmission, Pump & Pulley Group
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
2860444SM
1916964SM
1960151SM
1700021SM
1707299SM
1960110SM
2157427SM
2860454SM
2860443SM
1917356SM
1705983SM
1707328SM
1707400
1916622SM
1676253SM
1921319SM
1707399
1923938SM
1729280SM
1930645SM
1960251SM
1921210SM
1707006SM
1950036SM
1920427SM
1930645SM
1706589
2170164SM
1
6
1
2
2
1
4
3
2
1
2
1
3
1
3
3
4
2
1
1
1
1
1
1
1
1
1
1
CAPSCREW, Hex Hd., 6 mm-1.0 x 15 mm
LOCKWASHER, 1/4
WASHER, Flat
FAN, 10 Blade
PULLEY
SETSCREW, Sq. Hd., 1/4-28
KEY, Parallel
CAPSCREW, Hex Hd., 8 mm-1.25 x 80 mm
CAPSCREW, Hex Hd., 8 mm-1.25 x 140 mm
LOCKWASHER, 5/16
HYDRO PUMP
GASKET, Rubber
COVER, Vinyl
NUT, Hex 1/4-20
SPRING, Conical
WASHER, Flat, 1/4
ROD, Tow Valve
CAPSCREW, Hex Hd., 3/8-16 x 3-1/2
BOLT, Hub, Rear Wheel
NUT, Hex, Flange Lock, 3/8-16
NUT, Hex, Jam Lock, 3/8-16
CAPSCREW, Hex Hd., 3/8-16 x 1
SUPPORT, Transmission
CAPSCREW, Hex, 10 mm-1.5 x 25 mm
LOCKWASHER, Ext. Tooth, 3/8
NUT, Hex, Flange Lock 3/8-16
HYDRO TRANSAXLE
BELT, Drive
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
51
u
d
i
t
c
n
o
19-Dec-2021
Seat, Deck & Fuel Tank Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
52
Mfg. No: 1692007
n
o
19-Dec-2021
Seat, Deck & Fuel Tank Group
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
25
25
26
27
28
29
30
31
32
33
34
35
36
37
1687020SM
1685449
1931338SM
935112
1707525
1709308SM
1719809SM
1704728SM
1933468SM
1704723SM
1919438SM
1704724SM
1931350SM
1718858SM
1663752SM
1924940SM
1719712SM
1919439SM
1704366SM
1708054SM
1704108SM
1654930SM
1960459SM
1925003SM
1706513SM
1706513SM
1729511SM
1701229SM
1930601SM
1931648SM
1707137SM
1714441SM
1924356SM
1928352SM
1708361SM
1709307SM
1931339SM
1704299SM
1709256SM
1
1
2
1
2
2
1
2
2
1
2
2
2
1
2
2
1
2
1
1
1
1
2
4
1
1
1
1
2
4
1
1
2
2
1
1
2
2
2
SEAT
SUPPORT, Seat, Pivot (Early models - see note on illustration page)
CARRIAGE BOLT, 5/16-18 x 1-3/4 (Early models)
CLIP, Speed
SPACER (Early models)
SPRING, Compression
PLATE, Switch
SPRING, Compression, 2" O.D.
WASHER, Plain (Early models)
HANDLE, Grip
NUT, Hex, Full, 5/16-18
COVER, Spring
CARRIAGE BOLT, 3/8-16 x 1
BRACKET, Seat, Pivot
SPACER, 25/64 x 5/8 x 3/16
WASHER, Plain, 13/32
LEVER, Seat Release
NUT, Hex Hd., Nyloc, 3/8-16
CAP, Fuel Gauge
TANK, Fuel
ELBOW & TUBE ASSY.
BUSHING
SCREW, Truss Hd., Torx Dr., 3/8-16 x 1
SCREW, Taptite, 1/4-20 x 1/2
SEAT DECK (Orange)
SEAT DECK (Green)
SEAT DECK (Red)
BUSHING, Snap
SCREW, Taptite, 5/16-18 x 5/8
BOLT, Hex, Whizlock, 5/16-18 x 5/8
SPRING
BRACKET, Seat Slide
WASHER, Plain, 1-1/2 O.D. (Early models only)
NUT, Hex, Flange, Whizlock, 3/8-16
PLATE, Reinforcement (Later models only)
SUPPORT, Seat, Pivot (Later models only)
CARRIAGE BOLT, 5/16-18 x 2 (Later models only)
SPACER (Later models only)
WASHER, Spring, 5/16 x 1 1/4
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
53
u
d
i
t
c
n
o
19-Dec-2021
Steering Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
54
Mfg. No: 1692007
n
o
19-Dec-2021
Steering Group
REF NO
PART NO
QTY
DESCRIPTION
1
1923362SM
1
2
1919326SM
2
3
1657017SM
1
4
1925690SM
1
5
1686651SM
1
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
1707321SM
1919314SM
1960114SM
2173668SM
1931350SM
1703508ASM
2176440SM
1928352SM
1673796SM
1919438SM
1668927SM
1669567SM
1918403SM
1685478SM
1706991ASM
1960373SM
1716117SM
1686824SM
1921221SM
2830670SM
1706956SM
2154487SM
1611705SM
1930645SM
1706996SM
1928721SM
1706997SM
1707431SM
1714400SM
1704420SM
1960020SM
2171375SM
2170168SM
2154486SM
1729254SM
1960619SM
1685478SM
1708236SM
1702779SM
1919262SM
1708084A
1921969SM
1
1
13
1
4
1
3
2
1
1
2
1
1
1
2
2
1
1
1
1
1
2
2
2
1
2
1
1
1
2
2
2
2
4
2
2
1
2
2
2
1
2
NUT, Hex, Lock, 5/16-18
-Mfg. Nos. 1692006, 1692024, 1692033, 1692036, 1692042, 1692301, 1692303
WASHER, 5/16
-Mfg. Nos. 1692006, 1692024, 1692033, 1692036, 1692042, 1692301, 1692303
CAP, Steering Wheel
-Mfg. Nos. 1692006, 1692024, 1692033, 1692036, 1692042, 1692301, 1692303
CAPSCREW, 5/16-18 x 3-1/2
-Mfg. Nos. 1692006, 1692024, 1692033, 1692036, 1692042, 1692301, 1692303
STEERING WHEEL (Incl. Ref. Nos. 50, 51 & 52)(Ref. Nos. 1-4 are not required
with this kit.)
-Mfg. Nos. 1692006, 1692024, 1692033, 1692036, 1692042, 1692301, 1692303
SHAFT ASSY., Steering
COTTER PIN
WASHER, Plain, 49/64
WASHER, Plain
CARRIAGE BOLT, 3/8-16 x 1
PLATE, Mounting, Steering
BUSHING, Nylon
NUT
SPACER, Stop
NUT, Hex, Lock ESNA Light 5/16-18
NUT, Special, 3/8-24 (Early models)
BALL JOINT ASSY. (Early models)
NUT, Jam, 3/8-24 (Early models)
DRAG LINK (See Ref. No. 45)
SPINDLE ASSY.
SCREW, Taptite 5/16-18 x 3/4
SECTOR MOUNTING PLATE
GEAR ASSY., Steering
CAPSCREW, Hex Hd., 5/16-18 x 1-1/2
KEY, Hi Pro
TIE ROD
CAP, Hub
SPACER
NUT, Hex, Lock, Flange, 3/8-16
ARM ASSY., Steering, R.H.
SETSCREW, Sq. Hd., 5/16-18 x 1/2
STEERING ARM ASSY., L.H.
PITMAN ARM ASSY.
TUBE, Steering
KLIP RING
WASHER, Plain, 21/32
SPACER
SEAL
BEARING, Cone
COLLAR, Set
SETSCREW, Sq. Hd.
DRAG LINK ASSY. (Includes Ref. Nos. 43-49)
SPACER
JOINT-BALL .500-20 THD .500ID
NUT, Hex, Jam, 1/2-20
DRAG LINK
CAPSCREW, Hex Hd., 3/8-16 x 1-1/2
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
55
u
d
i
t
c
n
o
19-Dec-2021
Steering Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
56
Mfg. No: 1692007
n
o
19-Dec-2021
Steering Group
REF NO
PART NO
QTY
DESCRIPTION
48
49
50
51
1922755SM
1930645SM
1686651SM
1960540SM
2
2
1
1
52
1714097SM
1
WASHER
NUT, Hex Flange, 3/8-16
STEERING WHEEL, 15"
PIN, Spring, 5/16 x 2-1/2
-Mfg. Nos. 1692438, 1692440, 1692442, 1692444, 1692446, 1692448, 1692501
CAP, Steering Wheel
-Mfg. Nos. 1692438, 1692440, 1692442, 1692444, 1692446, 1692448, 1692501
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
57
u
d
i
t
c
n
o
19-Dec-2021
Wheels & Tires Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
58
Mfg. No: 1692007
n
o
19-Dec-2021
Wheels & Tires Group
REF NO
PART NO
QTY
DESCRIPTION
1
1713059
2
1
1713060
2
2
3
4
4
5
6
6
1713528SM
2164247SM
1713177SM
1713177SM
172352
1713062SM
1713062SM
2
1
2
2
2
2
2
7
8
9
9
10
11
12
12
1709969SM
2157638SM
1713174SM
1713174SM
2154393SM
2154486SM
2172353SM
2103049SM
2
1
2
2
2
2
2
1
12
1685718SM
1
FRONT WHEEL & TIRE ASSY., 16 x 6.50-8, Beige (Incl. Ref. Nos. 2, 3, 4, 5, 10
& 11)
FRONT WHEEL & TIRE ASSY., 16 x 6.50-8, Metallic Gray (Incl. Ref. Nos. 2, 3, 4,
5, 10 & 11)
TIRE, Dico, 16 x 6.50-8
TUBE, 16 X 6.50-8, (Service only, see note below.)
WHEEL ASSY. (Incl. Ref. No. 10), Beige
WHEEL ASSY. (Incl. Ref. No. 10), Silver
VALVE STEM & CAP
REAR WHEEL & TIRE ASSY., 23 x 10.5-12, Beige (Incl. Ref. Nos. 7, 8, 9 & 12)
REAR WHEEL & TIRE ASSY., 23 x 10.5-12, Metallic Gray (Incl. Ref. Nos. 7, 8, 9
& 12)
TIRE, Dico, 23 x 10.5-12
TUBE, (23 x 10.5-12)
WHEEL ASSY., Beige
WHEEL ASSY., Metallic Gray
BEARING CUP
BEARING CONE
VALVE STEM & CAP
TOUCH-UP PAINT, Beige, 13 oz. Spray Can
-Not shown
TOUCH-UP PAINT, Metallic Gray, 13 oz. Spray Can
-Not shown
FRONT WHEEL & TIRE ASSY., 16 x 6.50-8, Beige (Incl.Ref.Nos. 2, 3, 4, 5, 10 &
11)
FRONT WHEEL & TIRE ASSY. (16 x 6.50-8), Silver (Incl. Ref. Nos. 2, 3, 4, 5, 10
& 11)
TIRE, Carlisle, 16 x 6.50-8
TUBE, 16 X 6.50-8 (Service only, see note below.)
WHEEL ASSY., Beige (Incl. Ref. No.10)
WHEEL ASSY., Silver (Incl. Ref. No.10)
VALVE STEM & CAP
REAR WHEEL & TIRE ASSY., 23 x 10.5-12, Beige (Incl.Ref.Nos. 7, 8, 9 & 12)
REAR WHEEL & TIRE ASSY., 23 x 10.5-12, Silver (Incl. Ref. Nos. 7, 8, 9 & 12)
TIRE, Carlisle, 23 x 10.5-12
TUBE, 23 x 10.5-12
WHEEL ASSY., Beige
WHEE LASSY., Silver
BEARING CUP
BEARING CONE
VALVE STEM & CAP
TOUCH-UP PAINT, Beige, 13 oz. Spray Can
-Not Shown
TOUCH-UP PAINT, Silver, 13 oz. Spray Can
-Not Shown
1
1
2
3
4
4
5
6
6
7
8
9
9
10
11
12
12
12
F
t
o
N
1707203
2
1707535
2
1713528SM
2164247SM
1713177SM
1713177SM
2172353SM
1713062SM
1713062SM
1709969SM
2157638SM
1707523
1713174SM
2154393SM
2154486SM
2172353SM
2103049SM
2
1
2
2
2
2
2
2
1
2
2
2
2
2
1
1685644
1
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
59
u
d
i
t
c
n
o
19-Dec-2021
Hardware Identification & Torque Specifications
Torque Specification Chart
Torque Specification Chart
FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)
Property
Class
5.6
8.8
Class 5.6
Class 8.8
in/lbs
Size Of
Hardware ft/lbs
M3
M4
M5
M6
M7
M8
M10
M12
M14
M16
M18
M20
M22
M24
M27
M30
M33
M36
M39
5.88
13.44
26.4
44.64
5.2
7.7
15
26
42
64
89
126
169
217
320
435
590
759
988
10.9
Nm.
Nm.
in/lbs
ft/lbs
.56
1.28
2.50
4.3
7.1
10.5
21
36
58
88
121
171
230
295
435
590
800
1030
1340
13.44
30.72
60.96
7.3
12.1
17.7
35
61
101
147
202
290
390
497
733
995
1349
1740
2249
1.28 19.2
2.90 43.44
5.75 5.97
9.9 10.3
16.5 16.9
25
24
50
48
83 86.2
136
132
210
200
287
275
405
390
559
530
708
375
995 1032
1350 1401
1830 1902
2360 2441
3050 3163
SAE Grade 2
Class 12.9
Size Of
Hardware
Nm.
in/lbs
ft/lbs
Nm.
1.80
4.10
8.10
14
23
34
67
117
185
285
390
550
745
960
1400
1900
2580
3310
4290
22.92
52.56
7.15
12.1
19.9
29
59
103
162
250
346
486
656
840
1239
1681
2278
2935
3798
2.15
4.95
9.7
16.5
27
40
81
140
220
340
470
660
890
1140
1680
2280
3090
3980
5150
20
10
30
40
50
60
80
70
Body Length
Screw, M8- 1.25 x 25
Thread
Diameter (mm)
Threads
Inside
Diameter (in) per inch
1/4
1/2
3/4
1
2.1
2.3
3.1
3.5
7.6
8.6
15.0
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
102.0
122.4
136
217.6
244.8
190.4
210.8
299.2
326.4
Body
Length (mm)
Body
Length (in)
in/lbs
ft/lbs
30
31
43
49
8
10
17
19
30
35
50
55
75
90
110
120
150
180
260
300
400
440
580
640
SAE Grade 8
Nm.
in/lbs
ft/lbs
Nm.
3.4
3.5
4.9
5.5
10.9
13.6
23.1
25.8
40.8
47.6
68.0
74.8
102.0
122.4
149.6
163.2
204.0
244.8
353.6
408.0
544.0
598.4
788.8
870.4
41
43
60
68
12
14
25
29
45
50
70
80
110
120
150
170
220
240
386
420
600
660
900
1,000
4.6
4.9
6.8
7.7
16.3
19.0
34.0
34.0
61.2
68.0
95.2
108.8
149.6
163.2
204.0
231.2
299.2
326.4
525.0
571.2
816.0
897.6
1,244.0
1,360.0
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Screw, 1/2- 16 x 2
Nut, 1/2-16
0
Distance between
threads (mm)
Threads
per inch
Thread
Diameter (mm)
Body
Diameter
19
20
27
31
66
76
11
12
20
23
30
35
50
55
65
75
90
100
160
180
140
155
220
240
SAE Grade 5
Nm.
100
90
Body
Diameter
Nut, M8
in/lbs
ft/lbs
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
The guides and ruler furnished below are designed to
help you select the appropriate hardware.
0
No
Marks
Hardware
Grade
12.9
Class 10.9
in/lbs
ft/lbs
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
1/4
1/2
3/4
2
1/4
1/2
3/4
3
1/4
1/2
3/4
4
Common Hardware Types
Hex Head Capscrew
Washer
Standard Hardware Sizing
When a washer or nut is identified as 1/2” (M8), this is
the Nominal size, meaning the inside diameter is 1/2 inch
(8mm metric thread diameter); if a second number is present
it represents the threads per inch (distance between threads).
When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50),
this means the Nominal size, or body diameter is 1/2 inch (8mm
metric thread diameter), the second number,16, represents the
threads per inch, (distance between threads). The final number
is the body length of the bolt or screw, 2 inches (50mm).
Lockwasher
Carriage Bolt
Hex Nut
Wrench & Fastener Size Guide
1/4” Bolt or Nut
Wrench—7/16”
5/16” Bolt or Nut
Wrench—1/2”
3/8” Bolt or Nut
Wrench—9/16”
M6 Bolt or Nut
Wrench—10mm
M8 Bolt or Nut
Wrench—13mm
M10 Bolt or Nut
Wrench—17mm
7/16” Bolt or Nut
1/2” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench—3/4”
Wrench (Nut)—11/16”
M12 Bolt or Nut
Wrench—19mm
M14 Bolt or Nut
Wrench—22 mm
Copyright © Briggs & Stratton. All Rights reserved
19-Dec-2021

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project