Alco Electronics A2HW101 10.1Inches Windows Tablet User Manual

Add to my manuals
1 Pages


Alco Electronics A2HW101 10.1Inches Windows Tablet User Manual | Manualzz


Equipment tested for compliance as a complete unit

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.

These limits are designed to provide reasonable protection against har mful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: s Reorient or relocate the receiving antenna.

s Increase the separation between the equipment and receiver.

s s Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance (MLB International Inc., PO Box 1214,

Lockport, NY, 14095, Tel: 716-240-0902) could void the user’s authority to operate the equipment.

CAN ICES-3(B) / NMB-3(B)

This device complies with Industry Canada Licence-exempt RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Warning: the AC adapter is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the mains plug from mains completely, the AC adapter should be disconnected from the mains socket outlet completely.


Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use.

s Read these instructions.

s s Keep these instructions.

Heed all warnings.

s Follow all instructions.

s Do not use this apparatus near water.

s s Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

s Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

s Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.


Only use attachments / accessories specified by the manufacturer.

s Unplug this apparatus during lightning storms or when unused for long periods of time.

s Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.


The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

s Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings.

s s Do not place lighted candles, cigarettes, cigars, etc. on the product.

Care should be taken so that objects do not fall into the product.

s Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components.

s To prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

s Do not play your headset at high volume. Hearing experts warn against extended high-volume play.

Copyright and Trademark Notices

Intel Inside logo is trademarks of Intel Corporation in the U.S. and /or other countries, Copyright Intel Corporation, 2015. All rights reserved.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.

The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG Inc. Other trademarks and trade names are those of their respective owners.

Windows button

Press to open/close the Windows Start screen.

Getting To Know Your Tablet

Turn on the tablet in standby mode

Press the Power tablet screen.

button to turn on the


Use to connect the tablet to keyboard.


Touch pad

Sleep / Standby mode

Press the Power button to turn off the tablet screen.

Power off the tablet

You can shut down your tablet by doing either of the following:

Tap Settings from the Charms bar, then tap and select Shut down to do a normal shutdown.


Volume +/-

Swipe up the lock screen from the bottom edge of the display.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.

About HDMI

High-Definition Multimedia Interface (HDMI) is a high-speed digital interface that can transmit uncompressed high definition video and digital multichannel audio. It delivers high quality picture and sound quality. HDMI is fully backward compatible with DVI. As required by the HDMI standard, connecting to HDMI or DVI products without HDCP (High bandwidth Digital Content Protection) will result in no Video or Audio output.

All other trademark appearing herein are the property of their respective owners. Specifications subject to change without notice.

a. If your tablet is unresponsive, Press and hold the

Power button until the message " Slide to shut down you PC" appears.

b. Slide to the bottom edge of the display, then the tablet will be completely powered off.

Quick Start Guide

Remove tablet from keyboard

Turning on your tablet for the first time

Be sure your home Wi-Fi network is turned on and connected to the internet.

To wall outlet

Press and hold the Power seconds until the RCA logo appears.

button 4~5

Select the region and language, then tap and follow the onscreen instructions to setup the tablet.

Tablet docking

There are two ways to dock the tablet onto the keyboard.



The keyboard connects to the tablet via the Connector. When the connection is successful, the tablet will automatically adjust its settings to use the keyboard.


Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF