ARGtek Communication CPE2630 CPE Quick Installation Guide

Below you will find brief information for CPE CPE2630. This CPE is a WLAN Broadband Router and is delivered with factory default parameters on the Ethernet LAN interfaces. It has four operation modes: Gateway, Bridge, WISP, and AP Client. It takes about 25 seconds to complete the boot up sequence after power on from PoE.

PDF Download
Document
CPE CPE2630 Quick Installation Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • WLAN Broadband Router
  • Four operation modes
  • Default IP Address: 10.10.10.254
  • Default IP subnet mask: 255.255.255.0
  • WEB login User Name: admin
  • WEB login Password: admin
  • PoE connection
  • Reset button

Frequently asked questions

The default IP address for the device is 10.10.10.254 for Bridge/WISP/AP Client modes and 172.32.1.254 for Gateway mode.

It takes approximately 25 seconds for the CPE2630 to complete the boot up sequence after power on from PoE.

To reset the CPE, press and hold the reset button for about 10 seconds and wait for 35 seconds for the CPE to reboot.
Preparing document for printing…
0%