Beats Electronics COW81000052 PortableStereo Sound System User Manual

Add to my manuals
8 Pages


Beats Electronics COW81000052 PortableStereo Sound System User Manual | Manualzz

Beatbox Portable

User Guide

BeatboxPortableUG_FinalCopy_26Mar2012 all_r2.indd 1

= Spot gloss varnish

DO NOT print Cyan

-- ”b” logo should be a spot gloss varnish

-- Matte finish for entire manual

5/25/12 3:42 PM

BeatboxPortableUG_FinalCopy_26Mar2012 all_r2.indd 2-1

Table of Contents

EN LED Indicators

Remote Functionality

Important Safety Information

Speaker Placement

FCC Statement

FR Indicateurs DEL

Fonctions de la télécommande

Renseignements de sécurité importants

Positionnement des haut-parleurs

Énoncé de la CFC

ES Indicadores LED

Funcionalidad remota

Información importante sobre la seguridad

Colocación del parlante

Declaración FCC
















5/25/12 3:42 PM

1 - Plug in Power




Select Beatbox Portable

Choisir la Beatbox Portable

Seleccione su Beatbox Portátil







AC Power OR Battery Power

Alimentaition c.a. OU alimentation des piles

Potencia CA O Potencia de la batería

Batteries must be recycled or disposed of properly

Les piles doivent être recyclées ou jetées de manière adéquate

Las baterías deben reciclarse o deshecharse de forma adecuada

2 - Install Batteries

5 - Activate Pairing

BeatboxPortableUG_FinalCopy_26Mar2012 all_r2.indd 2-3

Auto detects docked device when connected

Détection automatique du raccordement de l'appareil une fois connecté

Detecta automáticamente un dispositivo acoplado cuando se conecta

6 - Choose Source

Power On

Allumer l'appareil



Pairing Mode

Mode d'appariement

Modo de conexión


3 - Power On

Manually override source input

Commande manuelle de priorité

sur l'entrée source

Controle manualmente la entrada

a fuente


7 - Change Source

4 - Initiate Pairing

5/25/12 3:42 PM


LED Indicators

Solid: Unit Powered On

Blink: Pairing Initiated

Rapid Blink: Volume Adjust

Slow Blink: Low Battery

Blink (x1): Switching Input


BeatboxPortableUG_FinalCopy_26Mar2012 all_r2.indd 4-5


Remote Functionality


5/25/12 3:42 PM


When device is docked


BeatboxPortableUG_FinalCopy_26Mar2012 all_r2.indd 6-7

When using audio aux jack/ BT


Important Safety Information

• Read, follow, and keep these instructions.

• Pay attention to all warnings.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. The wider blade is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.


5/25/12 3:42 PM


• Protect the power cord from being walked on or pinched, particularly at the plugs and the point where it exits from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.

• To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC receptacle.

• The mains plug of the power supply cord shall remain readily operable.

Warning: Batteries (battery or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.


BeatboxPortableUG_FinalCopy_26Mar2012 all_r2.indd 8-9


Speaker Placement

Some helpful guidelines that will help you achieve the best performance from your Beatbox.

Your Portable Beatbox is designed and engineered to sound great anywhere you place it. However, realizing that every space is different, there are placements that will maximize the performance of your Beatbox. The home environment can present a challenge in choosing the best location for your

Beatbox. The trick is to place the Beatbox in a location that will take advantage of the acoustic properties of your room and give you the best overall balance of sound.

Distance to the side walls, back wall and corners can have the biggest impact on the sound of your Beatbox. The closer the Beatbox is to a wall, floor, or ceiling the more bass reinforcement you will get. Maximum bass comes when it’s placed in a corner.

The shape of Beatbox allows you to place it perfectly into a corner, giving you a great combo of space saving and deep bass. The surface you place your

Beatbox on can also significantly impact the sound. Make sure you place your

Beatbox on a solid surface to avoid unwanted distortion to the sound.


5/25/12 3:42 PM


The height of your Beatbox in relation to your listening position can also affect the sound quality. Ideally, your Beatbox should be as close to ear level as possible and at least four feet away from your listening position for the best performance.

We encourage you to spend the time to experiment with the location of your

Beatbox. Trial and error is the best way to hear how your Beatbox reacts in your environment. Take your time to find the ideal location to ensure you experience the best sound quality your Beatbox has to offer.


BeatboxPortableUG_FinalCopy_26Mar2012 all_r2.indd 10-11


FCC Statement

FCC-ID: COW81000052

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.


5/25/12 3:42 PM


FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.


The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Canada Statement

This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section

2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain

Canadian information on RF exposure and compliance.

Register Your Beats Today


BeatboxPortableUG_FinalCopy_26Mar2012 all_r2.indd 12-13


Indicateurs DEL

Fixe : appareil allumé

Clignotant : appariement initié

Cllignotement rapide : réglage du volume

Clignotement lent : piles faibles

Clignote (1x) : changement de l'entrée


5/25/12 3:42 PM


Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals