Detection Systems OD850 intrusion detector Installation Instructions

Below you will find brief information for intrusion detector OD850. The OD850 is an outdoor intrusion detector capable of monitoring areas up to 50ft by 50ft. It uses both PIR and microwave technologies to ensure accurate detection of movement, while minimizing false alarms from environmental factors like swaying trees or hanging signs. The unit also features a tamper switch to alert you if the device is tampered with.

PDF Download
Document
OD850 Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Outdoor use
  • PIR/Microwave technology
  • Motion Analyzer II PIR signal processing
  • Linear Travel Distance (LTD) microwave processing
  • 50 ft. by 50 ft. coverage
  • Tamper switch
  • Adjustable sensitivity
  • Timed relay
  • AND/OR mode
  • Day/Night mode

Frequently asked questions

The OD850 has a coverage area of 50 ft by 50 ft (15 m by 15 m).

The temperature range of the OD850 is -31°F to +140°F (-35°C to +60°C).

The OD850 can be mounted using surface mount, pole mount, or bracket mount. The specific mounting options include a single-gang electrical box, surface mount without a box, pole mount using a supplied bracket, and bracket mount using an optional bracket.

To test the OD850, you need to walk test across the pattern at its farthest edge, then several times closer to the detector. Start walking from outside of the intended protection area and observe the LED. The edge of the pattern is determined by the first green (PIR) activation of the LED (or the first red activation if the flashing green microwave LED activates first).
Preparing document for printing…
0%