USER’S MANUAL
ATTACHMENT F
Road Weigher
Road Weigher
------------------------------------------------------
MODEL : RW – 10PRF
------------------------------------------------------
OWNER'S MANUAL
Federal Communications Commission Requirements
Road Weigher
Warning : Changes or modifications not expressly approved by the party responsible for compliance with the FCC ’ S rules could void the user's authority to operate the equipment.
THIS DEVICE COMPLIES WITH PARTS 15 OF FCC RULES
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
Road Weigher
Table of Contents
1. Introduction
••••••••••••••••••••••••••••••••••••••••••••
3
2.
Feature
•••••••••••••••••••••••••••••••••••••••••••••••••••
3. Technical
Specification
••••••••••••••••••••••••••••••••••
5
∅
Overview
∅
Dimension
∅
Specification
4. Connection for
Scale
•••••••••••••••••••••••••••••••••••••
8
5.
Description
••••••••••••••••••••••••••••••••••••••••••••••
4
10
1. Introduction
We greatly appreciate your purchase of CAS Road Weigher, which is used for
Road Weigher displaying the value of weight loaded on each shaft of vehicle.
These goods have hold excellent performance and splendid properties through strike
tests as well as devoting ourselves under severe quality management.
Also, it is programmed on the basic of the user's convenience help display functions
to be used easily.
Before using road Weigher, It is recommended to read this manual carefully and to apply the function application fully.
Refer to Indicator(RW-2601PRF) manual about weighing display.
cautions
∅
Do not press the on/off keys hardly, for the keys are in operation
with soft touch.
∅
Keep it in dry place.
∅
Floor Clint max 1/50(1
°
)
∅
Please weight vehicle in 1
°
(1/57) slop.
¡Æ
1
∅
Do not use at the place with excessive electrical noises and
57
vibration.
∅
Refer to page6 for weighing exactly in case of 2 axle.
3
Road Weigher
2. Feature
∅
Wireless data communication
∅
Ease to install, because of radio frequency
∅
Slim size
∅
Portable type to carry easily
Option
∅
Dummy plate
∅
PC Terminal
4
3. Technical Specification
∅
Overview
Road Weigher
5
Road Weigher
Dimension
6
Road Weigher
Specification
N o .
1
2
3
4
5
I T E M
MODEL
Max
Division
Accuracy
Size(mm)
6 Power Source
7 Operating Time
8
9
Weight
Function
10 Frequency
11
12
13
14
Channel
Channel interval
Generating
Power
Communication method
15 Comm. Speed
S P E C
RW-10PRF
10 000 lb (5 000k )
10 lb (5kg)
5 lb (2k )
0.1%
(W)720
⋅
(L)520
⋅
(H)40
Rechargeable Battery DC1.2V(Ni-MH) or
Dry Battery 1.5V AA size BATTERY x 12EA
RW-10PRF : 15 hour(TX) , RW-2601PRF : 12 hour(RX)
29kg (RAMP 4.5kg/EA)
Back Light , Zero , Tare , sum , Print
903Mhz ~ 918.5Mhz
32 Channel
500kHz
Maximum 10mW
FSK(Frequency Shift Keying fsk)
9600βπσ
7
Road Weigher
4. Connection for Scale
8
Road Weigher
9
Road Weigher
5. Description
Battery Exchange
500
ON/OFF Switch
Handle for carrier
Adjust Roller
Example
10
Road Weigher
Roller
11