Circus World Displays SMH-LVTW502P LevanaTwinkle502 User Manual

Add to my manuals
20 Pages

advertisement

Circus World Displays SMH-LVTW502P LevanaTwinkle502 User Manual | Manualzz

86H560$18$/

ZZZP\/HYDQDFRP

PRODUCT WARRANTY

INFORMATION

Please visit our web site at www.myLEVANA.com for information about your product’s warranty

We take quality very seriously. This is why all of our products come with a one year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following methods:

Phone: 1.866.946.7828

Fax: 1.888.771.1701

Web: www.myLEVANA.com

LEVANA Canada

4080 Montrose Road

Niagara Falls, ON

Canada, L2H 1J9

LEVANA USA

60 Industrial Parkway #Z64

Cheektowaga NY 14227

USA 14305

Warranty Terms

1. LEVANA products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price at LEVANA’s option.

2. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered with contrary to the applicable instruction manual.

3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty.

4. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty, expressed or implied is provided. LEVANA assumes no responsibilities for any other claims not specifically mentioned in this warranty.

5. This warranty does not cover the shipping cost, insurance or any other incidental charges.

6. You MUST call LEVANA before sending any product back for repair. You will be sent a Return

Authorization form with return instructions. When returning the product for warranty service, please pack it carefully in the original box with all supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem (include RA #).

7. This warranty is valid only in Canada and the continental U.S.

8. This warranty cannot be re-issued.

2

INTRODUCTION

Congratulations on your purchase of the Levana TW502

Digital Video Baby Monitor! This monitor uses advanced

Clearvu® digital technology that will deliver a crystal clear view of your baby’s room no matter where you are in the house. Feel free to relax and take comfort in knowing that your child is in good hands with Levana.

TABLE OF CONTENTS

PRODUCT WARRANTY INFORMATION .................................................................. 2

INTRODUCTION ................................................................................................ 3

FEATURES ........................................................................................................ 4

WHAT’S INCLUDED ............................................................................................ 5

BUTTONS AND CONNECTIONS - MONITOR ............................................................. 6

BUTTONS AND CONNECTIONS - CAMERA .............................................................. 8

SETTING UP YOUR SYSTEM ................................................................................. 10

PLACING THE BABY MONITOR ............................................................... 10

BATTERY OPERATION .......................................................................... 10

ATTACHING POWER TO THE CAMERA ..................................................... 10

USING THE RECHARGEABLE BATTERY .................................................... 11

ATTACHING POWER TO THE CHARGING BASE .......................................... 11

CHARGING THE MONITOR AND RECHARGEABLE BATTERY ......................... 11

CAMERA OPERATION ......................................................................................... 12

SWITCHING THE CAMERA ON/OFF ......................................................... 12

NIGHT VISION .................................................................................... 12

MONITOR OPERATION ....................................................................................... 13

SWITCHING THE CAMERA ON/OFF ......................................................... 13

SETTING THE BRIGHTNESS ................................................................... 13

ADJUSTING THE TEMPERATURE MEASUREMENT ..................................... 13

SWITCHING THE NIGHT LIGHT ON/OFF ................................................... 14

SWITCHING THE VIBRATION FUNCTION ON/OFF ..................................... 14

ADJUSTING THE VOX SENSITIVITY ......................................................... 15

SELECTING A LULLABY ......................................................................... 15

INTERCOM FEATURE ............................................................................ 16

RANGE .............................................................................................. 16

ADJUSTING THE VOLUME ..................................................................... 16

PAIRING THE DEVICES ....................................................................................... 17

TROUBLESHOOTING .......................................................................................... 18

SPECIFICATIONS ............................................................................................... 19

FCC STATEMENT ............................................................................................... 20

SAFETY INSTRUCTIONS ...................................................................................... 20

3

FEATURES

ClearVu® Digital Wireless Technology

ClearVu® technology ensures outstanding image and sound clarity so that you can watch and listen to your child up to 450ft away. With Levana, you’ll never miss a moment.

Temperature Monitoring to Ensure Safety

Many studies indicate that your baby’s room should be between 61°-68° F (16°-20° C).

This system is equipped so you can monitor the temperature in your baby’s room and know that they are always safe and comfortable.

Sound-Activated Vibration

This unique feature allows you to monitor your baby’s every sound without any loud disturbances. Simply turn on the vibrate function and the parent unit will vibrate whenever any noise is detected in your baby’s room.

Night Vision

The built-in night vision allows you to see your child, even in complete darkness. When the lights go down the system automatically adjusts to the level of light. With 10ft of night vision range, the camera can be placed anywhere in your child’s room while still displaying a precise image of your baby.

Relaxing LED Night Light

The baby unit has a gentle night light that you are able to turn on and off from the parent unit. Turn the light on if your baby is getting restless to calm them and turn it off when your baby is asleep, all without going into the baby’s room.

Five Soothing Lullabies

Choose from five different lullabies to sooth your baby to sleep. Turn lullabies on and off as well as change the song being played all from the parent unit with the simple push of a button.

Voice Activated Control

Conserve battery power with VOX activation. You have the ability to adjust the level of sound needed in order for your monitor to turn on. Turn VOX up high if your baby is quieter or turn it down low at night, so you are only woken when your baby really needs you.

Talk to Baby Intercom

Sooth your baby from a distance with the talk-to-baby intercom. With the simple press of a button you can let your baby know you are on your way to their nursery or simply talk to them until they fall back to sleep without having to go into his or her room.

Rechargeable Monitor

When you’re not on the move, simply put your monitor on its base to recharge – no batteries required! Enjoy up to four hours of continuous audio and video monitoring with a fully charged unit.

4

FEATURES

LED Noise Level Indication Lights

The monitor has LED lights on it that light up to display up to five different levels of sound. This means you can turn the volume all the way down, relax and still know when and how much noise your baby is making.

All-in-One Table Stand and Belt Clip

The table-stand also functions as a belt clip for ultra usability. With the table stand, place the monitor upright when you are in the same room or carry the monitor with you and still have both hands available by using the belt clip.

Energy Efficient Power Adapter

The power adapters save you on power all while saving the environment. They are rated with a Level V efficiency standard which means they are 30% more energy efficient then other conventional power adapters.

Wall Mount on Baby Camera for the Best Viewing Angle

The camera can be wall mounted so you can easily view your baby in its crib as well as see all other parts of the nursery.

24/7 Lifetime Live Customer Support

Our customer support team can be reached by phone 24/7 or by email and live web chat services, so you always have access to an expert.

WHAT’S INCLUDED

5

BUTTONS AND CONNECTIONS - MONITOR

1. Antenna

Transmits and receives signals

2. Volume Level LEDs

Indicates the amount of sound being heard by the camera

3. Increase Volume and Brightness

Increases the volume through the speaker, and adjusts settings in the menu

4. Decrease Volume and Brightness

Decreases the volume through the speaker, and adjusts settings in the menu

Turns the unit ON and OFF

Illuminated green when the monitor has power, blinks when there is no camera detected

7. Microphone

Captures the sound of your voice in intercom mode

Place the monitor in the charging base to recharge the battery

9. Play/Pause

Plays or pauses the lullaby playing through the camera

10. Lullaby Selector

Selects the lullaby that the camera will play

11. Talk Button

Enables you to speak through the camera intercom

12. Menu Button

Brings up the menu options

13. VOX LED

Illuminates red when VOX is enabled

(see page 15 for more information)

14. Speaker

Belt Clip and Support Located on Back of Monitor

7

BUTTONS AND CONNECTIONS - CAMERA

1. Antenna

Transmits and receives signals

2. Night Vision IR LEDs

Allows you to see up to 10 feet in complete darkness

6. CDS Light Sensor

Detects the absence of light and turns on night vision

Indicates that the camera is

Point at what you would like to view on the monitor

4. Microphone

Captures all sounds in the baby’s room

8. Power

Plug the included adapter into

Soothe baby to sleep with the built in night light

Reads the temperature and displays it on the monitor

10. Battery Compartment

Remove screw to install 4 AAA batteries

(not included) for a completely wireless system

9

SETTING UP YOUR SYSTEM

Placing the Baby Monitor

This monitor can be placed on a tabletop or hung from a screw on the wall above the area being monitored. Place the monitor within ten feet of the area being monitored for best picture and to ensure that everything will be visible with the IR LEDs on.

1. You can carry the monitor on your belt by turning up the clip on the back of the monitor.

2. You can also set up the monitor on a tabletop by turning the belt clip down and using it as a support stand.

Battery Operation

The camera unit can be powered using 4 AAA batteries instead of the included AC adapter.

1. Remove the battery compartment cover on the bottom of the camera base, using a small phillips (cross) head screwdriver.

2. Place 4 AAA batteries (not included) in the compartment, paying attention to the labelled polarity markings.

3. Replace the battery compartment cover using the small screwdriver.

Note: The power LED will flash when the battery charge is low.

Attaching Power to the Camera

1. Connect the AC adapter to the transmitter as shown in the diagram.

2. Connect the small end into the DC Jack on the back of the camera, connect the other end of the adapter into an available wall outlet.

10

SETTING UP YOUR SYSTEM

Using the Rechargeable Battery

1. Turn the belt clip on the back of the monitor unit, upwards.

2. Remove the battery compartment cover by sliding it down off the back of the monitor

3. Insert the included rechargeable battery, plug the battery cord in to the small jack on the inside of the battery compartment.

Attaching Power to the Charging Base

1. Connect the AC adapter to the charging base as shown in the diagram.

2. Connect the small end into the DC Jack on the back of the charging base, connect the other end of the adapter into an available wall outlet.

3. For safety reasons, use ONLY the adapters included in the package.

Charging the Monitor and Rechargeable Battery

1. To charge the battery in the monitor unit, place the monitor frontwards onto the charging dock once the power adapter has been attached.

2. The power LED will light up red to indicate that the battery is being charged.

3. For safety reasons, use ONLY the adapters included in the package.

Note: When the battery in the monitor is low battery, the power LED will flash slowly, recharging the battery will be required shortly after.

11

CAMERA OPERATION

Switching the Camera ON/OFF

Position the camera to view the area you wish to monitor, angle the camera lens for best view, by turning it up or down.

1. Slide the power switch to the ON position.

2. The Power LED on the front of the camera will light up green. The camera is now ready to operate.

3. To turn OFF the camera, flip the power switch back to the OFF position

Note: If you are using batteries to power the camera unit, and it does not start up when the power switch is in the ON position, you may need to replace the batteries. The Power LED will flash slowly when the batteries are low power.

Night Vision

The camera is equipped with eight IR (infrared) LEDs. These LEDs, located on the front of the camera, allow you to see up to ten feet in complete darkness. Allowing you to check your baby at any time of night.The night vision LEDs will activate automatically when the camera detects that the light levels are too low.

12

MONITOR OPERATION

Switching the Monitor ON/OFF

1. Press and hold the power button until you hear two beeps.

2. The LEVANA logo will appear on the screen for a moment followed by the picture being transmitted.

3. To turn off the unit, press and hold the power button again for 1 second.

Note: The power LED will flash slowly when the rechargeable battery is low power.

Setting the Brightness

1. Press the menu button

3. Use the up and down buttons brightness level up and down.

once.

2. The brightness icon will display on the screen along with the brightness gauge that will indicated the current set level.

on the left side of the monitor to adjust the

Adjusting the Temperature Measurement

The ideal temperature for a baby’s room is between 16° - 20° celcius or 61° - 68° fahrenheit. Please set or adjust the room temperature accordingly.

1. Press the menu button twice.

2. The temperature icon will display on the screen along with the current status of the temperature function, either Celcius, Fahrenheit, or OFF.

3. Use the up and down buttons on the left side of the monitor to turn the temperature function ON, to display either Celcius or Fahrenheit temperatures, or to set the temperature function OFF.

13

MONITOR OPERATION

Switching the Night Light ON/OFF

1. Press the menu button

2. The night light icon will display on the screen along with the current status of the function, either ON or OFF.

3. Use the up and down buttons

three times.

night light of the camera ON or OFF.

on the left side of the monitor to turn the

Switching the Vibration Function ON/OFF

1. Press the menu button four times.

2. The vibration icon will display on the screen along with the current vibration status that will indicate whether the function is ON or OFF.

3. Use the up and down buttons vibration function ON or OFF.

on the left side of the monitor to adjust the

Note: When the vibration function is ON, the monitor will vibrate to alert you every time that sound is detected over a certain level by the camera.

14

MONITOR OPERATION

Adjusting the VOX* Sensitivity

VOX = Voice Operated Transmission = Sound Detection

The VOX function causes the camera to transmit video and audio immediately after a sound is heard. Once transmission begins, the video will play for 10 seconds if no more noise is heard. Pressing a button on the monitor will also turn the screen and transmission

ON at any time.

Setting the sensitivity of the VOX function will affect how easily the video will be transmitted, one bar will require much louder sounds being detected before transmission will begin, than the five bar setting requires.

1. Press the menu button five times.

VOX will display on the screen along with the current status of the function, either OFF or a gauge indicating the current

3. Use the up and down buttons on the left side of the monitor to turn the VOX function OFF or adjust the sensitivity up and down. One bar being the lowest and five bars being the highest sensitivity.

Selecting a Lullaby

1. Press the play/pause button on the right hand side of the monitor once.

will start to play.

3. Press the lullaby button lullabies to play.

on the right side of the monitor to select one of five

4. Press the up and down volume buttons of the music.

during playback to adjust the volume

Note: If no number is displayed beside the lullaby icon, all five lullabies will play one after another until the play/pause button is pressed again.

15

MONITOR OPERATION

Intercom Feature

This video baby monitor is equipped with a 2-way audio intercom to enable you to talk to and soothe your baby back to sleep without going into the room.

1. Press and hold the intercom button in the middle of the front of the monitor.

2. The intercom icon will appear on the monitor screen, and you will be able to speak and be heard through the speaker in the camera.

3. To stop talking release the intercom button.

Range

1. When the distance between the camera and monitor is too great, the screen will go black and the range icon will appear , if this happens you will have to move the units closer together.

Adjusting the volume

1. In normal monitor operation, you can press the up and down buttons on the left hand side of the monitor to adjust the volume of the noises you are hearing from the baby’s room.

16

PAIRING THE DEVICES

The camera and monitor come paired (connected) together. If you do receive this package and the devices do not automatically connect and transmit, you may do so manually.

1. Slide the power switch position.

3. Slide the power switch camera to the ON position.

on the right hand side of the camera to the OFF

2. Cover the light sensor on the front of the camera with your finger or a cloth.

on the

4. With the monitor switched on, press and hold the play/pause button for two seconds.

5. The pair icon will appear on the screen and the power LED on the camera will blink for a few seconds.

6. Press the menu button on the monitor to confirm the setting.

7. C1... OK! will appear when the camera and monitor are paired successfully and then the video and audio will be transmitted automatically.

Note: If “C1...X” appears (pair failed) instead of “C1...OK!” you will have to remove all sources of power from the camera and monitor and start the pairing process over again.

17

TROUBLESHOOTING

PROBLEM SOLUTION

Equipment does not function

No reception

Reception Interference (static)

Feedback (screeching, static)

• Camera and/or monitor are not

switched on

• The battery is dead or defective

• The power adapters are not connected

• Camera and monitor are not paired

• Camera is too far away from monitor

• The VOX sensitivity is set too low

• The camera and monitor are too far apart

• The battery power is too low

• Other electronic devices are interfering with the signal

• The camera or monitor are placed near too many metal objects

• The camera and monitor are too close together

• The volume on the monitor is set too high

Noise • Battery power is too low

Picture works but there is no sound • Volume setting is too low

Picture is black and white

The rechargeable battery will not charge

• Night vision LEDs are ON

• Increase the amount of light in the room being monitored

• The power adapters are not connected

• Battery pack is not plugged in inside the battery compartment

• The monitor is not docked properly

Maintenance

• Clean the surfaces of the camera and monitor with a soft, fluff-free cloth

• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allow water into any openings

• Never use cleaning agents or solvents

18

SPECIFICATIONS

Camera Specifications

Input Power...............................................................100 - 240 VAC, 50 - 60 Hz ~ 200mA

Output Power ............................................................6 VDC ~ 800mA

IR LEDs and Range .....................................................8 LEDs, 10 foot range

Range.........................................................................450 Feet Maximum

Frequency Range .......................................................2.4 GHz

Operable Temperature ...............................................32 ˚ F to 104 ˚ F (0 ˚ C to 40 ˚ C)

Transmission Power ...................................................

< 20 dBm

Monitor Specifications

Input Power .............................................................. 100 - 240 VAC, 50 - 60 Hz ~ 200 mA

Output Power ............................................................ 6VDC ~ 800mA

Operable Temperature ...............................................32 ˚ F to 104 ˚ F (0 ˚ C to 40 ˚ C)

Screen Size ................................................................ 2.4”

Initial Charging Time ................................................. 3 Hours

Battery Power Time ................................................... 4 Hours

19

)&&$33529('

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Label Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference

This device must accept any interference received, including interference that may cause undesired operation

For baby unit

This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment .This equipment should be installed and operated with minimum distance

20 cm between the radiator & your body. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

For parents unit

This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment. Devices that allow transmissions while worn next to the body using an accessory are tested with the device and associated accessories in all applicable orientations, at the minimum separation distance, using a flat phantom, and 1g SAR <

1.6 W/kg. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The manufacturer is not responsible for any radio or TV interference caused by authority to operate the equipment.

6$)(7<,16758&7,216

Read and Keep Instructions: All the safety and operating instructions should be read before the video baby monitor is operated.

Water and Moisture: This product is designed for indoor use only. The unit should not be place on top of, or beside the product, such as a glass or vase. This item should not be used near water.

Non-Use Periods: Always unplug the AC adapters from the wall outlets during long periods of non-use.

16/09/2010 12:47:22 PM

SAFETY INSTRUCTIONS

Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air flow.

Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as a candle, fireplace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight.

Power Source: This unit should only be used with the AC power adapters included in this package (rated 6V 800mA)

Damage Requiring Service: This unit should be serviced by qualified personnel only when: a. Objects have fallen or liquid has been spilled into the product b. The units have been exposed to rain c. The units do not appear to operate normally or exhibits a distinct change in performance d. The units have been dropped or the enclosure damaged

Caution: This product cannot replace responsible adult supervision of a child. You should personally check your child’s activity at regular intervals.

STATEMENT ON REGULATION

These units are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Operation with non-approved equipment or unshielded cables is likely to result in interference to radio or TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.

21

3OHDVHYLVLW

ZZZP\/HYDQDFRPIRU

:DUUDQW\LQIRUPDWLRQ

SURGXFWVXSSRUW

FRQWDFWLQIRUPDWLRQ

XVHUPDQXDOGRZQORDGV

DQGPXFKPRUH

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals