DVS Korea DVD player User manual
Below you will find brief information for DVD player. The DVD player is capable of playing DVD-Video, DVD-R, DVD-RW, DVD+R, DVD+RW, Super VCD, VCD, CD, CD-R and CD-RW discs, as well as MP3 files and Picture CDs. This DVD player also offers a 3D surround sound effect, various equalizer modes and reverb effects, as well as the ability to adjust the sharpness, brightness and contrast of the picture.
Advertisement
Advertisement
Getting Started
C onnecting to Car Radio System
For use internal FM transmitter any connecting will be required.
Wired FM transmitter model
Connecting 2 wires to car antenna and car radio system each other.
Car Antenna
TV
Audio Signal
Car Radio
Video Signal
Wireless FM transmitter model
Just connect antenna to it's connector
Car Antenna
TV
Audio Signal
Car Radio
Video Signal
Setting the FM transmitter frequency
SETUP => Audio Setup Page => FM Tx => Setting FM Frequency (Off, 88.1MHz ~ 88.9MHz)
CAUTION
- Some Frequency has any broadcasting signal.
- Audio signal has noise sometimes followed by moving position or electrical noise.
Sometimes wireless FM transmitter causes some noise according to setting position
of DVD player and environmental condition (high voltage wire or another radio frequency)
Getting Started 21
Getting Started
C onnecting to Component Video Input
Pb Y
Video Output
Pr
Component Cable
Audio Output
L(White)
R (Red)
L
R
Audio Input
Y
Pb
Pr
Video Input
TV
Connecting to Component Video Input
Some TV system has component video signal input terminal. DVD player can output component video signal. At this mode progressive scan will possible.
Connect the component video (Y/Pb/Pr or RGB) cable to it's terminal and setting the setup menu.
Setting the Component video output
SETUP => Video Setup Page => Component (select Off / YUV / RGB)
Setting the Progressive Scan (enable when YUV or RGB selected)
SETUP => Video Setup Page => TV Mode (select Interlace / P-SCAN)
22
Getting Started
Basic Operation
P laying DVD Video Discs
Before Playing Your DVD Disc
Ensure that your DVD player is connected correctly to the TV and audio system, which are output components. Turn on the power of the TV and audio system.
Ensure that the local code of the DVD player is matched to that of the disc. If not matched, your disc will not be played.
To Play a DVD Disc
Press the POWER ( )button.
Insert the DVD disc. Ensure that the labeled surface (not the surface where data is recorded) is at the top when placing it.
Your DVD disc will be automatically played depending on the current program mode.
1) The Disc menu is displayed on the screen. Select the desired menu using the
arrow ( )buttons or NUMBER buttons and press the ENTER button to play
your DVD disc.
Basic Operation
23
Basic Operation
Basic Playback Controls
PLAY/PAUSE( ) : Starts playback or pause a disc that's playing
(press again to restart playback)
STOP( ): Stop playback
FR( ): Press for fast backward searching.
FF( ): Press for fast forward searching
PREV( ): Skip to the previous chapter.
NEXT( ): Skip to the next chapter.
Basic Disc Menu Controls
Some DVD discs contain menus. Sometimes these are displayed automatically when you start playback; others only appear when you press MENU or Title remote control.
TITLE ( )button: Displays the top menu of a DVD disc
MENU ( )button: Displays a DVD disc menu-this varies with the disc and may be the
same as the top menu.
RETURN ( )button: Returns to the previously displayed menu screen.
Arrow( ) button: Move the cursor around the screen.
ENTER ( )button: Selects the current menu option.
Number button: Selects a numbered menu option
N ote
- Don't move the DVD player during playback. During so may damage the disc and the
DVD player.
- When " " appears on the TV screen while a button is pressed, it means that this
function is not available on the disc you are playing.
- Depending on the DVD disc, some operations may be different or restricted. Refer to
the jacket or case of disc you are playing.
24
Basic Operation
Basic Operation
P laying MP3 discs
To Play a MP3 File
Insert the MP3 disc. Make sure that the disc's label is facing up.
MP3 menu screen is displayed automatically depending on MP3 disc's folder (directory) structure
Using the UP( ) or DOWN( ) button to find the desired folder
Press the ENTER( ) button to select.
The TV screen shows the file lists under the folder.
Press the PROGRAM ( ) button repeatedly. Each time you pressed,
PROGRAM mode will be changed repeatedly. (Folder a Filelist)
Basic Operation
25
Basic Operation
N ote
- The file name is only displayed in English.
- This DVD player is compatible with the "MPEG-1 Audio Layer 3" standard. It is not
compatible with such other standards as "MPEG-2 Audio Layer 3", "MPEG-2.5 Audio
Layer 3", MP1, MP2, etc.
- Do not play CD-R/RW discs containing any files other than music CD files, MP3 and
JPEG files.
- Programmed playback is not possible with MP3 discs.
- When writing MP3 files on CD-R/RW discs, select "ISO9660 level 1" as the writing
software format.
P laying Kodak picture CD and JPEG file play
When a Kodak Picture CD is inserted, an automated slide show is launched. When a JPEG file loaded, the table of contents is displayed on TV screen. 16 slideshow transition modes are provided. Use the PROGRAM button to switch the slideshow transition mode.
Diagonal Wipe Right Top -> Diagonal Wipe Left Bottom -> Diagonal Wipe Right Bottom ->
Extend from Center H -> Extend from Center V -> Compress to Center H -> Compress to
Center V -> Window H -> Window V -> Wipe from Edge to Center -> Move in from Top -> None)
Select the picture
Select the picture, you want to see, by pressing the UP( ) or DOWN( ) button.
The selected item shows as small size picture on the right side of File Menu Screen.
Image rotation
There are 4 modes to rotate a picture: Left, Right, Invert, Mirror
- UP( ) button : invert
- DOWN( ) button :mirror
- LEFT( ) button :Turn left
- RIGHT( ) button :Turn right
Each time the ZOOM button is pressed during playback, zoom 125 -> 150 -> 200 ->
50 -> 75 -> zoom off is selected repeatedly
- UP( ) button : Moving up the zooming picture
- DOWN( ) button : Moving down the zooming picture
- LEFT( ) button : Moving left the zooming picture
- RIGHT( ) button : Moving right the zooming picture
26
Basic Operation
Basic Operation
F ast Forward/Backward
Use this function to play the DISC contents in fast forward or fast reverse. During searching, audio will be muted (except CD-DA).
Press the FR ( ) or FF ( ) button during disc play.
ඔඔG x 2 ඔඔG x 4 ඔඔG x 8 ඔඔG x 16 ඔඔG x 32
ඖඖG x 2 ඖඖG x 4 ඖඖG x 8 ඖඖG x 16 ඖඖG x 32
Press the PLAY/PAUSE ( ) button to resume normal playback.
S kip Forward/Backward
Use this function to move to the net or previous chapter for DVD, track for VCD and CD-DA.
Press the PREV ( ) button to go to the previous chapter or track.
Press the NEXT ( ) button to go to the next chapter or track.
N ote
- This function will not operate if there is only one chapter per a disc.
Basic Operation
27
Basic Operation
S low Forward/Backward
Use this function to play the DISC contents in slow forward or slow reverse. During searching, audio will be muted.
Press the PLAY/PAUSE ( ) button during play mode.
Press the ( ) or ( ) repeatedly.
ඖ
1/2
ඖ
1/4
ඖ
1/2
ඖ
1/4
ඖ
ඖ
1/8
1/8
ඖ
ඖ
1/16
1/16
Press the PLAY/PAUSE ( ) button to resume normal playback.
F rame-by-Frame Playback
Press the PLAY/PAUSE ( ) button during play mode.
Press the ( ) button repeatedly.
Each time you pressed, forward one frame is displayed at a time.
Press the ( ) button repeatedly.
Each time you pressed, backward one frame is displayed at a time.
Press the PLAY/PAUSE ( ) button to resume normal playback.
28
Basic Operaion
Advanced Operation
OSD (O n-screen Display)
You can display the playback status on TV screen as following; Title, Chapter number,
Playing time, Disc.
Press the DISPLAY ( )button during playback
- Disc, Chapter(DVD), Track(CD-DA),
Time information appears on screen.
To turn off the on-screen display, press the DISPLAY ( )button
S electing Audio Language
It is possible to change the audio soundtrack language to a different language from the one selected at the initial settings. This operation works only with discs on which multiple audio soundtrack languages are recorded. If the loaded disc supports multiple languages, you can select the audio language.
Press the AUDIO button repeatedly during playback. Each time you pressed, the audio language is changed
Advanced Operation
29
Advanced Operation
S electing Subtitles
It is possible to change the subtitle language to a different language from the one selected at the initial settings. This operation works only with discs on which multiple subtitle languages are recorded.
Press the SUB-T ( )button during disc play.
The subtitle info banner appears.
The default is Subtitle off.
If no subtitle are recorded, the ( ) icon will appear.
Press the SUB-T ( )button repeatedly until the desired subtitle language is displayed.
To turn subtitle off, press the SUB-T ( )button until Subtitle off is displayed.
N ote
This function is a disc dependent. There are some DVD discs that prevent selecting subtitle even if it supports multiple subtitles. In this case, the subtitle should be selected via disc menu.
30
Advanced Operation
Advanced Operation
R epeating a Title, Chapter (DVD), Track (CD-DA)
You can play the desired title, chapter, section repeatedly.
Press the PLAY MODE ( )button during disc play.
- Each press of the PLAY MODE button changes the repeat mode in the following
sequence.
To resume normal playback, press the PLAY MODE ( )button repeatedly until the repeat mode indicator disappears on screen.
N ote
With some DVD discs, there may be times when repeat playback is not possible.
R epeating a specific section
During playback, press the A-B ( )button at the beginning of the desired section.
Advanced Operation
31
Advanced Operation
Press the A-B ( ) button again at the end of the section. "AB" will be displayed on the screen then the A-B section is continually repeated.
To resume normal playback, press the A-B ( ) button repeatedly until the repeat mode indicator disappears on screen.
P rogram play
This function is used to play the Title, Chapter and Tracks on the disc in order you program.
Press the PROGRAM ( ) button on remote controller. Program menu is displayed on screen.
Select the Title, Chapter (DVD) and Track NO. (CD-DA) is displayed on the TV screen.
DVD CD-DA
Select other NO. to program. Repeat step 2 until the programming is finished. You can add desired tracks up to 20 programs.
32
Advanced Operation
Advanced Operation
Using the UP ( ) or DOWN( ) button to select the "Start". And play now begins in the programmed sequence.
DVD CD-DA
Stop all the programmed title, chapter and tracks. Using the UP( ) or DOWN( ) button to select the "Exit".
DVD CD-DA
Z ooming a Picture
Press the ZOOM ( )button during playback.
Each press of the ZOOM ( )button changes the zoom mode in the following sequence.
2 3 4 1/2 1/3 1/4 NORMAL
If you press the direction button during the ZOOM mode, the ZOOM point will shift.
To resume normal playback, press ZOOM ( )button repeatedly until the repeat mode indicator disappears on screen.
Advanced Operation
33
Advanced Operation
S witching the Camera Angle
Some DVDs contain scenes that have been shot simultaneously from multiple angles.
Press the ANGLE ( )button on the remote control during disc play. The ANGLE icon appears. If no additional camera angle are recorded, The ( ) icon will be displayed.
If multiple camera angles are recorded, the ANGLE icon displays the current angle number and the number of available.
Press the ANGLE ( )button again to go to the next camera angle.
N ote
This feature does not work if a DVD has not been recorded with multiple camera angle
34
Advanced Operation
Advanced Operation
DIRECT S earch (GO TO)
This function is used to go to the chapter, track or song of the disc you want.
DVD
Press the GOTO ( )button during playback.
Select "Chapt" and press DOWN ( ) button.
Enter the title number using numeric button.
CD-DA
Press the GOTO ( )button during playback.
Select "Track" and press the DOWN ( ) button.
Enter the Track number using numeric button.
MP3
Press the GOTO ( )button during playback.
Select "Song" and press the DOWN ( ) button.
Enter the Song number using numeric button.
Advanced Operation
35
Using the Setup Menu
Once the initial settings have been completed, the player can always be operated under the same conditions whenever the power is switched on. These settings are called SETUP data that are easily modified and stored using the SETUP menu. The SETUP menu includes the information for GENERAL, VIDEO, AUDIO and PREFERENCES system controls.
B asic Operations
Press SETUP ( )button during stop mode. And use the ARROW ( )button and
ENTER ( ) button to navigate and select options. The current setting for any option is marked with a colored box.
Press the STOP ( ) button, if the disc is being played.
To call the SETUP menu, press the SETUP ( ) button.
Use the LEFT( ) or RIGHT( ) button to find desired items.
To turn off the SETUP menu, press the SETUP ( )button again.
Depending on the disc, some setup menu selections may not work properly.
N ote
36
Using the Setup Menu
Using the Setup Menu
G eneral Setup
TV DISPLAY
You can select a TV screen aspect ratio according to your TV.
If the TV on which the movie is played is of 'WIDE' type, choose "WIDE". If it is of
"4:3" type, choose NORMAL/PS(Pan & Scan) or NORMAL/LB(Letter Box).
NORMAL/PS : Choose this setting if you want the movie to fill the
entire screen of your TV. This might mean that the
left and right edges won't be seen.
NORMAL/LB : Choose this setting if you want to see movies in their
original aspect ratio. The movie might appear with
black bars at top and bottom of the screen.
WIDE : Choose this setting if your DVD player is connected
to a wide screen TV.
ANGLE MARK
You can set up so that the angle mark appears on scenes.
On: When selected, the screen will show angle
mark during disc play.
Off: When selected, no angle mark is shown on
the screen.
Using the Setup Menu
37
Using the Setup menu
OSD language
Use this option to set the on-screen display language.
When selected, change to set the on-screen display language.
CAPTIONS
Adjusts caption selections.
On: Choose this setting to display captions.
Off: Choose this setting to close captions.
Last Memory
Adjusts Last Memory selections
38
Using the Setup Menu
Using the Setup Menu
A udio Setup
EQ Type
This unit can produce a 3D Surround effect, using 3D Surround Sound technology.
Choose the desired preset equalizer mode.
(Rock, Pop, Live, Dance, Techno, Classic, Soft)
BASS BOOST
This is enhanced at all levels without distorting other frequency.
SUPER BASS
This is enhanced at all levels without distorting other frequency.
TREBLE BOOST
This is enhanced at all levels without distorting other frequency.
Using the Setup Menu
39
Using the Setup Menu
REVERB MODE
To enjoy various surround sound, features when you can select and desired sound effect.
(Concert, Living Room, Hall, Bathroom,
Cave, Arena, Church)
SPDIF SETUP
To connect the unit's digital output to an external device equipped with a digital input, this item must be set correctly.
1) SPDIF OFF
2) SPDIF / RAW : Output Dolby Digital
(or DTS) Bitstream directly.
If you connected this unit's
DIGITAL OUT jack to a Dolby
Digital decoder (or an amplifier
or other equipment with a Dolby
Digital decoder).
3) SPDIF / PCM : Output Decoded Dolby
Digital (or DTS) Bitstreem.
Select when connected to a 2ch
digital stereo amplifier. This unit
outputs sounds in the PCM 2ch
format when you play a DVD video
disc recorded on the Dolby Digital,
MPEG1, or MPEG2 recording
system.
40 Using the Setup Menu
Using the Setup Menu
V ideo Setup
SHARPNESS
Adjusts the sharpness of the image.
Press the ENTER( ) button to select the adjust mode, the use the UP( ) or DOWN( ) buttons to select the image quality adjustment item.
BRIGHTNESS
1) Adjusts the picture's brightness.
2) Press the ENTER ( )button to select the adjust mode, then use the LEFT( ) or RIGHT( ) buttons to select the image quality adjustment item.
CONTRAST
1) Adjusts the contrast of the picture.
2) Press the ENTER ( )button to select the adjust mode, then use the LEFT( ) or RIGHT( ) buttons to select the image quality adjustment item.
Using the Setup Menu
41
Using the Setup Menu
P reference Setup
PBC
This feature is only available when a (Super) Video CD is loaded. It allows you to disable or enable the PBC (Playback Control) menu of VCD discs.
1) Press the SETUP ( )button when during
stop mode.
2) Press the LEFT/RIGHT ( )button to move
to Preference.
3) Press the UP/DOWN ( )button to move PBC.
4) Press the ENTER ( )button.
5) Press the UP/DOWN ( )button to select
On/Off.
AUDIO
Use the audio language menu to select the subtitle language that you prefer. If the disc you are playing has that language available, it will display subtitle in that l anguage.
1) Press the SETUP ( )button when during
stop mode.
2) Press the LEFT/RIGHT ( )button to move
to Preference.
3) Press the UP/DOWN ( )button to move Audio.
4) Press the ENTER ( )button.
5) Press the UP/DOWN ( )button to select
desired audio language.
SUBTITLE
Use the subtitle language menu to select the subtitle language that you prefer.
If the disc you are playing has that language available, it will display subtitle in that language.
1) Press the SETUP ( )button when during
stop mode.
2) Press the LEFT/RIGHT ( )button to move
to Preference.
3) Press the UP/DOWN ( )button to move Audio.
4) Press the ENTER ( )button.
5) Press the UP/DOWN ( )button to select
desired subtitle.
42
Using the Setup Menu
Using the Setup Menu
4
DISC MENU
Use the Disc Menu option to select the language you want a DVD's disc menu to be displayed in (not the same as the player menu)
1) Press the SETUP ( ) button during
stop mode
2) Press the LEFT/RIGHT ( ) button to
move to Preference.
3) Press the UP/DOWN ( ) button to move
to Sub.
4) Press the ENTER ( ) button.
5) Press the UP/DOWN ( ) button to select
Disc Menu.
5
PARENTAL
The Parental feature is a rating limit system, like movie ratings.
It works with DVD's that have been assigned a rating. This option lets you determine how your player will react to discs that contain movies that are rated (in the U.S.A., the Motion Pictures Association of America rates movies as G, PG, PG-13, etc.).
You decide which ratings require a password and which ones don't.
1) Press the SETUP ( ) button when stop mode
2) Press the LEFT/RIGHT ( ) button to
move to Preference.
3) Press the UP/DOWN ( ) button to move
to Parental.
4) Press the ENTER ( ) button.
5) Press the UP/DOWN ( ) button to select
desired parental level.
6
DEFAULT
If user selects reset from the setup menu, all the value of setup menu will be initialized by factory setting value. (Exception: Parental level, Region code and Password values will not be changed)
1) Press the SETUP ( ) button when stop mode.
2) Press the LEFT/RIGHT ( ) button to
move to Preference.
3) Press the UP/DOWN ( ) button to move
to Default.
4) Press the ENTER ( ) button.
5) Press the ENTER ( ) button to select reset.
Using the Setup Menu 43
Using the Setup Menu
P assword Setup
1. PASSWORD MODE
PASSWORD CHANGE
1) Select "Password Setup" sub item
2) Enter your old password and new password in 4 digits.
3) Re-enter new password for confirms then press ENTER button.
N ote
- Do not forget the password
- The setting cannot be changed without inputting the correct password.
44
Using the Setup Menu
Additional Information
S pecifications
General System
Signal System
Video output
S-Video output
Audio output
Audio Characteristic
Digital Output
Accessories
* Optional
Power Supply
Power Consumption
Weight
External Dimensions (mm)
Operation Temperature
Operation Humidity
NTSC / PAL / MULTI
Output Level
Jacks
Y (luminance) - Output Level
C (color) - Output Level
Jacks
During Audio Output
Number of Channels
Jacks
Frequency Response
S/N Ratio
Dynamic Range
Total Harmonic Distortion
Coaxial Digital Output
Audio/Video Cable
Remote Control
1.5V(AAA SIZE)
IR Module *
Cigar Cable *
DC Cable *
Mounting Bracket for Car *
Screws *
Manual, Warranty Card
DVD-Video/DVD-R/-RW/+R/+RW/
Super VCD/VCD/CD/CD-R/RW/
MP3 files/Picture CD
DC 12V, 1.5A
1A, 12W
1,175g
178.0(W) x 212.2(D) x 42.0(H)
-5 ~ 50
10~80%
2
4
1
1
1
2
1
1.0Vp-p(75ohm)
RCA Jack
1.0Vp-p(75ohm)
0.286Vp-p(75ohm)
S-Video Jack
2Vrms(1kHz, 0dB)
2
RCA Jack
4Hz to 44kHz(DVD fs: 96kHz)
More than 85dB
More than 85dB
0.08%
RCA Jack
1
1
Additional Information 45
Additional Information
T roubleshooting
Symptom
No power
The power is on,
but the DVD player doesn't work
No sound
Cause
The power cord is disconnected.
No disc in inserted.
Correction
Plug the power cord into the wall outlet securely
Insert a disc. (Check that the DVD or audio
CD indicator in the DVD display is lit.)
No picture
The playback picture is poor.
The equipment connected with the audio cable is not set to receive DVD signal
Select the appropriate video input mode on the TV so the picture from the DVD player output
The audio cables are not connected securely.
appears on the TV screen.
Connect the audio cable into the jacks securely.
The power of the equipment connected with the audio cable is turned off.
The digital audio output is set the wrong position.
The TV is not set to receive DVD signal output.
Turn on the equipment connected with the audio cable.
Set the Digital Audio Output to the correct position, and then turn on the DVD player again by pressing the POWER button.
Select the appropriate video input mode on the TV so the picture from the DVD player
The video cable is not connected securely.
The disc is dirty.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not place within the guide.
A menu is on the TV screen.
The rating level is set.
appears on the TV screen.
Connect the video cable into the jacks securely.
Switch TV to appropriate mode using the
TV mode using the TV MODE button on the remote control.
Check if you pressed the AUDIO ONLY button.
Clean the disc.
Insert a disc. (Check that the DVD, or audio
CD indicator in the DVD display is lit.)
Insert a playable disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.)
Place the disc with the playback side down.
Insert the disc correctly inside the guide.
Press the SETUP button to turn off the menu screen.
Cancel the rating function or change the rating level.
46 Additional Information
Additional Information
Symptom
The remote control doesn't work properly.
The analog audio OK, but there appears to be no digital audio signal.
Cause
The remote control is not pointed at the remote sensor of the DVD player.
The remote control is too far from the
DVD player.
There is an obstacle in path of the remote control and the DVD player.
The battery in the remote control is exhausted.
Incorrect Audio menu settings.
The disc containing the MP3 tracks won't play
Some MP3 tracks appear to be missing from a disc.
If a track name not end in ".mp3" or
".MP3", this player will not recognize it as an MP3 track.
Correction
Point the remote control at the remote sensor of the DVD player.
Operate the remote control within about
23ft(about 7m).
Remove the obstacle.
Replace the battery with new one.
Make sure that the Digital Out setting is set to BITSTREAM or PCM. Check that the BITSTREAM and PCM settings are suitable for your amplifier check the amp's instruction manual.
If the disc is a recordable CD, make sure that the disc is finalized.Check that the tracks are in the MPEG1 Audio Layer 3 format.
G Designs, Accessories and specifications are subject to change without notice.
Additional Information 47
Limited Warranty
One(1) Year Limited Warranty
WHO IS COVERED?
A proof of purchase is required to received to warranty service. A sales receipt or other document showing original date purchase is considered proof of purchase.
Warranty repair is one (1) year limited warranty coverage :
* Parts and labor are included under warranty repair.
WHAT IS NOT COVERED ?
NOTE : If you don't have proof of purchase, then your unit will be considered out-of-warranty.
Out-of-warranty repairs will be charge at a flat labor rate, including any necessary parts.
WHAT IS EXCLUDED ?
Your warranty does not cover :
* Labor charges for installation ro setup of the product, adjustment of customer controls on the
product, and installation or repair of antenna systems outside of the product.
* Product repair and / or part replacement because of misuse, accident, unauthorized repair or
other cause not within the control of its manufacturer.
* A product that requires modification or adaptation to enable it to operate in any country other
than the country for which it was designed, manufactured, approved and / or authorized, or
repair of products damaged by these modifications.
* Incidental or consequential damages resulting from the product. (Some states do not allow the
incidental or consequential damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.)
MAKE SURE YOU KEEP
Please keep your sales receipt or other document showing proof purchase. Also keep the original box and packing material in case you need to return your product.
MODEL #
SERIAL #
CUSTOMER SUPPORT
This warranty gives you specific legal right.
You may have other right which vary from state / province to state / provaice.

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Plays DVD-Video, DVD-R, DVD-RW, DVD+R, DVD+RW, Super VCD, VCD, CD, CD-R and CD-RW discs
- Plays MP3 files and Picture CDs
- 3D surround sound effect
- Various equalizer modes and reverb effects
- Adjusts the sharpness, brightness and contrast of the picture