HiTi CS 200e Card Printer User manual
Below you will find brief information for Card Printer CS 200e. The HiTi CS-200e card printer allows you to print high-quality plastic cards conveniently for personalized ID cards, credit cards, membership cards, and badges. It features a 300 dpi print head, USB and Ethernet connectivity, a 50 card output hopper and supports a variety of card types.
Advertisement
Advertisement
HiTi
user manual
HiTi Digital, Inc.
www.hiti.com
CONTENTS
PREFACE
Announcements
Chapter 1. Getting ready
1.1 Checking box contents
1.2 Appearance of the printer and key functions
1.3 Installation
1.3.1 Ribbon Installing
1.3.2 Printer Connecting (Power & USB)
1.3.3 Card Placing
Chapter 2. Start Printing
2.1 Printer driver installation
2.2 Print settings
Chapter 3. Printer maintenance
3.1 General warranty information notice announcement
3.2 Routine / Regular printer cleaning
3.2.1 Using cleaning card
3.2.2 Using dust arrester
3.2.3 Cleaning TPH (Thermal Print Head)
Chapter 4. Help diagnosis
4.1 Warnings / Error messages and diagnosis
4.1.1 LCM control panel
4.1.2 Control panel warning messages
4.2 Identify installed driver software version
4.3 Troubleshooting
4.3.1 Printing problems
4.3.2 Releasing from card jams
4.4 Technical support
Appendix A: Technical Specifications
Appendix B: FCC Compliance Statement
HiTi CS-200e user manual
18
19
20
20
16
17
17
17
21
22
23
25
12
13
14
15
10
10
11
12
06
06
07
08
01
03
03
04
HiTi CS-200e user manual
Copyright
HiTi CS Card Printer © 2011. All rights reserved.
Copyright notice
Users must comply with the copyright regulations applicable in their own country. This manual must not be reproduced, translated, photocopied, transmitted or any kind to be duplicated in whole or in part, for any reasons and by any electronic or mechanical means whatsoever without the express a written consent of the
HiTi Digital Inc.
All the information contained in this document is subject to changed without prior notice.
HiTi Digital Inc. cannot be held liable for any errors that may be found in this manual, or for any loss or damage arising accidentally or as a result of dissemination or use of this manual.
Trademarks acknowledgement
HiTi CS Card Printer is a trademark of HiTi Digital Inc. product. All other trademarks belong to their respective holders.
Warranty
Refer to the warranty card supplied with your card printer package box for warranty terms, conditions and limitations.
01
HiTi CS-200e user manual
Knowing your new printer
We thank you for choosing HiTi CS card printer, the beginning of our long term successful association with you together. With HiTi CS card printer, you will be able to enjoy easy operating, high quality plastic cards printing conveniently for personalized ID card, credit cards, membership cards and badges from various level of thickness and color style. Please ensure HiTi CS card printer to use the original consumables from
HiTi Digital Inc. For more details, visit our website at www.hiti.com
.
Warranty Registration
Please do take time to register online at www.hiti.com and you will be rewarded with a special offer after registration is completed.
Getting ready to start
The main purpose of this user guide is to guide you to set up your printer step by step. Please take time to read through this carefully and complete the installation before start operating. This will save you time during installation and use, help you to understand more about this printer and its features. Should you discover any errors in this guide, please do help us by emailing us at [email protected] .
Assistant Icons
The following assistant icons will show up in this guide to indicate important information to be noticed.
Special warning notice More in-depth information notice
02
HiTi CS-200e user manual
Chapter1. Getting ready
1.1 Checking box contents
HiTi CS card printer is supplied with several accessories and please do take time to check it closely.
The accessories contents list may vary depending from your region/location.
If any of below item is missing, please contact your nearest HiTi customer support facility of your local HiTi CS card printer distributor.
Accessories provide with your HiTi CS card printer:
Card output hopper Weight module user manual
USB cable user manual
Power adaptor
Master CD Dust arrester with cleaning roller
03
Cleaning kit
Power cord
HiTi CS-200e user manual
1.2 Appearance of the printer and key functions
Top cover opening button
Input card cover
Input card feeder (100cards)
Manual releasing card jam screw socket
(flathead screwdriver)
LCM control panel
Manual card feed input location
04
Spec. label
ON / OFF hard power switch button
USB cable connection socket
Power socket
Ethernet expansion socket (Optional)
Smart IC encoding expansion socket (Optional)
Thermal print head
Ribbon spool fitting position
(color coded)
Ribbon ID key socket
HiTi CS-200e user manual
Card thickness adjustor
Dust arrester socket
05
HiTi CS-200e user manual
1.3 Installation
1.3.1 Ribbon Installing
Using the original HiTi CS Card Printer Ribbon consumables will optimize your printer’s performance and avoid causing damages to it. Use of non HiTi original consumables will void the manufacturer’s warranty policy for the printer.
To optimize printing quality, please engage in printer cleaning every time when the ribbon is changed. a. Open the top cover.
b. Place the ribbon ID key into ID key socket. c. Insert the ribbon as shown.
Please ensure your ribbon format is corresponded to installed ribbon ID key’s label.
Please make sure your ribbon film is facing top side during installation and also ensure the color of ribbon spool/core is matching to the ribbon adapter/holder.
d. Close the top cover slowly and press until a click sound is heard.
a b c d
06
HiTi CS-200e user manual
1.3.2 Printer Connecting (Power & USB)
Power
a. Connect power cable to power adaptor, then plug the power connector to printer’s power socket b. Plug the power plug to an earthed power socket
Please make sure the power plug is connected into a properly protected and earthed electrical source.
c. Switch ON from the ON/OFF button to power up the printer, then the LCM control panel should light up
and display “ready” message which indicates the printer is under working condition.
For your own safety, please make sure the power cable is always unplugged before attempting any service maintenance work. a b c d
READY
USB
Please make sure the print driver software is fully installed before connecting the USB cable to your printer device.
Refer to the print driver installation section of this user guide for more details, and follow the instruction carefully.
07
HiTi CS-200e user manual
1.3.3 Card Placing
Loading (Automatic)
For optimum printing quality, please ensure all cards are CR-80 standard with ISO 7810 certified.
Please do not touch the printable surface and not to use any dusty, damaged, folded or embossed cards in your printer. a. Open input card cover.
b. Place the cards into input card feeder with positioned shown in the diagram. c. Close the input card feed cover. a b c
Card thickness adjustor
Loading (Manual queue jump)
This feature is designed when a single manually queue jump in printing or encoding job is required during fully loaded cards are positioned in input card feeder.
Weight module is required for manual loading.
a. Insert card manually with location and positioned shown in the diagram. b. Start printing or encoding command from PC.
08
Push a
HiTi CS-200e user manual
Collecting
When the printing and/or encoding cycle is completed, the printed and/or encoded card will be returned into output hopper which is designed with a capacity of 50 x 0.8mm cards.
Adjusting
The printer has a manual adjustable card thickness mechanism which can be located inside the printer unit when the top cover is open. The thickness level accepts from 0.3mm to 1.0mm, and the factory setting is at 0.8mm.
Card thickness adjustor a. Open the top cover.
b. Adjust the thickness level by moving the lever from left to right to the preferred thickness setting. c. Close the top cover.
a b c
09
HiTi CS-200e user manual
Chapter2. Start printing
2.1 Print driver installation
For your own safety, please make sure the power cable is always unplugged before attempting any service maintenance work.
This is an important step and requires special attention to configure the printer and driver correctly before start using it. Improper settings may result in substandard quality. It is essential to proceed installation process step by step, and changing any default settings only if when you are completely sure. We do offer an option to revert settings back to original factory settings at any time if any adjustment which you have made that does not correspond to the expected outcome results.
A CD is bundled with the printer which contains the printer driver for MS Windows-base PC.
If the CD guide is missing, please contact your nearest HiTi customer support facility or your local
HiTi CS card printer distributor.
To begin install a print driver, please insert the CD into your computer and select the printer driver menu.
A program will start and guide you through the entire configuration and settings process step by step.
Please refer to printer connecting section for USB connecting procedure in this user guide for more details.
Some version of Microsoft Windows may require the user to have administration rights to install the driver.
10
HiTi CS-200e user manual
2.2 Print settings
Before start using your HiTi card printer, it is very important to double check and/or change the default print driver settings. Those settings includes in the following list:
Ribbon types Card types Card thickness Others
Please pay attention to the settings in printer driver and contact your local HiTi distributor or dealer for any advice and assistance needed before attempting any changes.
Those settings of driver can be accessed from the following instructions:
From the Start button (located bottom-left on the Windows task bar), select “Printers and Faxes”
Select your HiTi card printer and then follow by a click on right button of the mouse
From the Printer menu, select “Printing Preference”
A pop up configuration screen for HiTi card printer appears
The main menu tabs include Device Option, Printing Area, Color, Tools, Heating Energy, Magnetic Encoding, Import/Export & About
The most frequent use in print settings are Device Option, Color and Tools.
Device Option Tab
Ribbon type
Card type
Card thickness
Front & back image
Page order
Using Resin K
Color Tab
Color preference setting
Special function
Color adjustment
11
Tools Tab
Printer position adjuster
Cleaning tool option
Maintenance info
Advance option
Heating energy option
HiTi CS-200e user manual
Chapter3. Printer maintenance
3.1 General warranty information notice announcement
HiTi CS card printer is professional designed to provide you a long term service duty with minimum regular maintenance required. Therefore please do comply with the instructions given in below to ensure your printer unit is covered by warranty condition.
* IT’S IMPORTANT TO STAY COVERED BY YOUR WARRANTY!! *
All the manufacturer’s warranty conditions are subject to strict adherence to the regular routine servicing and maintenance instructions, and also printer cleaning cycles.
Any failure of the following required servicing and maintenance job duties mentioned in this chapter may void the print head warranty.
HiTi CS card printer accepts no any other liability what so ever where it has been any single failure to perform required servicing and maintenance job duties on the printer. It is common to know that the print head is an extremely sensitive as well as a wearing and tearing component. Therefore the life expectancy is heavily depending on the presence of solids, dust or liquids in the environment, either on the print head or cards. Every operating user must take all necessary precautions to use clean cards in the printer unit. The frequency and quality of the servicing and maintenance job duties will not only extend the print head’s life expectancy, but also maintain the output printed quality. It is very important to all users must comply with the servicing and maintenance instructions which described within this chapter.
Use of non HiTi original consumables/ribbons may affect the quality and reliability of print job, low quality printed output and may also affect the printer’s physical functions. The manufacturer’s warranty does not cover any physical damages, quality problems and print head warranty by using non HiTi original consumables/ribbons.
12
HiTi CS-200e user manual
3.2 Routine / Regular printer cleaning
Proactive reminder of cleaning is given by the driver, and it is required to go with the instruction, or else the warranty on TPH may be invalid.
Item Description
Color / Mono Ribbon
Magnetic Encoding
Cleaning required after
400 cards
400 cards
13
HiTi CS-200e user manual
3.2.1 Using cleaning card
Each pack/box of HiTi original consumables should contain one single piece of cleaning card. a. Remove any remaining cards from input card feeder.
b. Remove pilled protection film from the cleaning card and then place it in the feeder.
c. Go to print settings in the driver, and access Printing Preference . Choose tab Tools ,
then apply Cleaning Tool .
a c b
14
HiTi CS-200e user manual
3.2.2 Using dust arrester
Each pack/box of HiTi original consumables should contain a set of dust arrester (with cleaning roller).
If first to use...
a. Take the dust arrester with cleaning roller from the accessory box of printer carton.
b. Remove adhesive film from the cleaning roller, and then put dust arrester into the printer.
Remove adhesive film
If need to change cleaning roller of dust arrester...
used
Open the cover gently Take dust arrester from printer Remove the used cleaning roller
NEW
Put the metal shaft into the new cleaning roller
Assembly the roller and dust arrester
15
Place dust arrester back to the printer
HiTi CS-200e user manual
3.2.3 Cleaning TPH (Thermal Print Head)
Please unplug the power cable from printer before start doing TPH cleaning process.
Try not to make any direct physical contact to TPH with any metal/sharp objects or your fingers.
The TPH and its components must be kept away from any discharge of static electricity.
In order to maintain original print out quality, it is highly recommended to perform this process every time when a ribbon is changed.
a. Press the top opening button to open cover gently, and the TPH is attached to the ribbon door.
b. Please use the sponge stick to clean the TPH.
a b
16
HiTi CS-200e user manual
Chapter4. Help Diagnosis
4.1 Warnings / Error messages and diagnosis
HiTi CS card printer is designed to get user involvement down to a minimum level. It is advised to gain some familiarity with basic warning messages knowledge during the operation.
4.1.1 LCM control panel
Basic descriptions
The printer is equipped with a LCD display with four buttons to give the access to printer menu and two
LED lights to show conditional status. All printing status and warning/error messages will be displayed in this LCD screen.
Return to home page Page switch
Green Light / Normal status
Page switch
Red Light / Error status
Enter / Set / Confirm
17
HiTi CS-200e user manual
4.1.2 Control panel warning messages
PMessages Displayed
Cover Open
Flipper Cover Open
Description
Top cover door is opened
Flipper cover door is opened
IC Chip Missing
Ribbon Missing
Ribbon Mismatch
Ribbon Type Error
Ribbon Out
Print Fail
Card Out
Card Jam
Solutions
Close the top cover door.
Close the flipper cover door.
Ribbon IC chip is not inserted
Ribbon is not installed
Installed ribbon does not match with ribbon IC chip ID
Unsupported ribbon type
Failing to searching ribbon
End of ribbon usage
Fail to start printing process
Install ribbon IC chip into printer’s IC chip socket.
Install ribbon with corresponded IC chip into printer.
Check ribbon type and install the corresponded IC chip.
Check ribbon’s region code with matching printer’s region code.
Reinstall the ribbon again with correct installation procedure.
Reinstall a new ribbon with IC chip.
Check the ribbon to see if it’s snapped.
Card runs out Place more cards with card’s weight module.
Inconsistency between card thickness adjustor and card used Get the setting of adjustor and card used consistent
Adsorption force among cards Move cards apart and then arrange them to input hopper for retry
Jammed during operation Follow the LCM screen for releasing card jam instructions.
Card Mismatch
Cam Error
Different types of cards
Internal mechanical cam platen error
Use CR-80 standard cards.
Contact your local service center for professional advice.
Flipper Error
Ribbon Error
Flipper unable to perform its duty
Ribbon’s IC chip error
Contact your local service center for professional advice.
Reinsert IC chip again or change a new IC chip if it’s required.
18
HiTi CS-200e user manual
4.2 Identify installed driver software version
You can easily indentify your driver version by accessing from your printer properties menu. It is essential to keep your printer driver to be the latest version which always published from official HiTi web site.
Checking your driver version can be accessed from the following instructions:
19
HiTi CS-200e user manual
4.3 Troubleshooting
4.3.1 Printing problems
Nothing in action
Check the printer driver to see if it is truly, well installed.
Check the printer power supply and USB cable
Check the ribbon and card
Print a demo chart
Printed a blank card
Partial or incorrect printing
Printed some small blemishes
Printed horizontal white lines
Printed vertical white lines
Printed blurred images
Check the ribbon
Check value A setting of “Printing Area” in the driver. To define value A as default to retry.
Check the card to see if it carters to CR-80 specification
Check the printer settings
Check the interface cable and ribbon
Make sue the printer’s cleaning roller is clean
Check the printing card is clean
Check the print head
The card surface may be dirty or work on cleaning via dust arrestor
Print head clogged
Check the roller of dust arrester to see if there’s need to change a new one
Check the ribbon is fitted correctly
Check the print head is dirty or damaged
TPH may be impaired. Contact the distributor or dealer nearest to you for help.
Check the ribbon to see if is fitted correctly
Check the print head to see if there’s need to do the cleaning
Check the cleaning roller of dust arrester to see if there’s need to change a new one.
Check the card is compatible or not
20
HiTi CS-200e user manual
4.3.2 Releasing from card jams
Please remove the jammed card by the following instruction displayed on LCM control panel of the printer before continuing the printing job.
Open the printer cover door
Remove the ribbon
Follow the instruction on the LCM control panel with three options: Auto removal, Semi-auto removal and Manual removal
During semi-auto removal and manual removal process, please do not put your hands into the card printer.
You can also perform the following steps to prevent card jams:
Check the card thickness settings is correctly adjusted from the printer driver option and thickness gauge
Check the card thickness is fitted under specified specification in this manual
Check the cards are flat in horizontal position
Check the cards are not stuck together, and shuffle cards is required before loading
Illustration for manual removal card jams:
Twist clockwise
Flathead screwdriver
21
HiTi CS-200e user manual
4.4 Technical support
If you have come across any difficulties in configuring and/or operating your HiTi card printer, please read this manual carefully.
If you are unable to manage solving your problems, you can obtain further information or help from your local authorized distributor or reseller.
For any unresolved technical problems, if you don’t know your local distributor or reseller. You can visit our website www.hiti.com for contacting information and send us your questions.
We will be more than happy to assist you at anytime. It is important for you to provide those following information at anytime during your contact for servicing help:
Your printer model and serial number
The configuration and operating system which you are using
A detail descriptions of the incidents/problems which has occurred
A detail descriptions of the steps which you have already taken to solve the incidents/problems
If you need any additional information or technical help, you can obtain those information from our website www.hiti.com which offers you the ability to download the latest printer driver, firmware, user manual, and FAQ (Frequent Ask Questions) to maintaining your HiTi card printer.
22
HiTi CS-200e user manual
Appendix A: Technical Specifications
General Technical Features
Printing Modes
Performance
(various from card design & settings)
System Request
Supported Platforms
Supplied Software
HiTi CS-200e Card Printer
Color printing module
300dpi print head
USB connection
Ethernet TCP/IP connection as an optional module (Availability to be updated)
64MB RAM / 1MB Flash
50 cards output hopper (0.8mm/30mil)
4 buttons and 2 LED control panel
Color sublimation and monochrome thermal transfer
HiTi color technology enhanced
Edge to edge printing
A.I smart ribbon saving for monochrome printing
Color: 1 side (YMCKO) = around 20 sec (under lab testing environment)
Monochrome: 1 side = 5 sec
IBM-PC or compatible, Windows 2000/XP/Vista, Pentium R class 133MHz above
Computer with 128MB RAM or higher, 100MB free hard disk space or higher
Windows 2000/XP/Vista/Windows 7 (32 & 64 bits)
For Mac and Linux support, please contact Hiti Customer Service for detail.
HiTi CardDésirée CS for designing and printing cards, compatible with Windows 2000/XP/Vista/7 and connects to MS Excel databases
23
Ribbon Types
Options
(Easy Add Modules)
Warranty
General Information
HiTi CS-200e user manual
Full panel YMCKO color ribbon: 400prints/roll
1/2 panel YMCKO color ribbon: 560prints/roll
Monochrome Black ribbon: up to 1000prints/roll
400 cards high capacity input hopper
Flipper module
Magnetic encoding module (ISO 7811 HiCo/LoCo or JIS2 magnetic strip encoder)
Smart IC encoding module (ISO 7816-2 / PC/SC, EMV 2000-1)
Contactless/RFID encoding module (ISO 14443A, B, ISO 15693, Mifare, DesFire, HID iCLASS)
Ethernet connection module
Vary from region to region, please consult with your local distributor or reseller for details
Card types: PVC card
Card format: ISO CR-80 / ISO 7810 (53.98mm x 85.60mm)
Card thickness: From 0.3mm(10mil) to 1mm (40mil) – Dual side printing: From 0.5mm (20mil)
Input card feeder capacity: 100 cards (0.8mm/30mil)
Output hopper capacity: 50 cards (0.8mm/30mil)
Printer dimensions: 197.8mm (W) x 354mm (L) x 204mm (H)
Weight: 4.9kg
Connections: USB port, Ethernet TCP/IP port as an option (Ethernet 10/100 Mbps)
Power supply: AC input: 100~240V~2.5A, 50~60Hz / DC output: 24V = 4.16A
Operating environment: +15ºC to +32ºC / 20% to 85% RH (without condensation)
Storage environment: -20ºC to +60ºC / 20% to 90%RH (without condensation)
Operating ventilation: open cooled air area
24
HiTi CS-200e user manual
Appendix B FCC Compliance Statement
1. Notice : The changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
2.IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements,no change to the
antenna or the device is permitted. Any change to the antenna or the device could
result in the device exceeding the RF exposure requirements and void user’s
authority to operate the device.
3. FCC INFORMATION:
The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph:
The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation.If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
The user should not modify or change this equipment without written approval
Form HiTi Digital Inc. Modification could void authority to use this equipment.
25
HiTi CS-200e ͐ᮢ⦦ᆙ ⅺ㋤ʑᄽ
目錄
聲明
第一章: 準備開始
1.1 檢視內容物
1.2
印卡機外觀功能
1.3 安裝方式
1.3.1 卡片收集
1.3.2 卡片調整
1.3.3 卡片安置方式
第二章: 列印
2.1
安裝驅動軟體
2.2 列印設定
第三章: 清潔保養維護
3.1 基本保固條款說明
3.2
定期的清潔保養
3.2.1 使用清潔卡
3.2.2 替換集塵膠捲器
3.2.3 清潔熱感應頭
第四章: 幫忙協助
4.1 警告和錯誤訊息的診斷
4.1.1
LCD 控制面版
4.1.2 控制面版的警示訊息
4.2
檢視驅動程式安裝的版本
4.3 故障排除
4.3.1 印卡機的故障問題
4.3.2 排除夾卡
4.4
技術支援
附錄 A: 技術規格
附錄
B: FCC
安規說明
HiTi CS-200e
使用說明
18
19
20
20
16
17
17
17
21
22
23
25
12
13
14
15
10
10
11
12
06
06
07
08
01
03
03
04
HiTi CS-200e ͐ᮢ⦦ᆙ
ᦹᓏŘ
HiTi CS Card Printer ©2011 ౺ȯ ᦹᓏሷȯ
┮̳ᓏŘ
͐ᮢ≛ൕㅱ⸅Ң߱ߡሷ〦ᦹᓏ᱿⠗⣳હȯ ͐ᮢ༆ҩ߱ቍ⳧⦞ᶇẤ༬⊵˷ሷくҝ (HiTi Digital, Inc.) ᆙᷨ᱿ሬ
ㄇ࿙ᓏ˫Ԋʃവ˫˶᮫̬Ȯ˶̬ᅞೣ⡕ⵒ˷Қⵒ⢒⢌Ȯ⢒֬Ȯ≒⨿ȮЗႩŊᤀ⧄ᆯヅઈᦹȮᄽᦹ˫˶̬ࠣೣ
᱿ᅞೣاȯ
༆ҩҙծؐ᱿˶̬ΒȮᄽ˴ᄽॖሷ⩐ሩŊපʃנ⠗ⳇᵧȯ
⦞ᶇẤ༬⊵˷ሷくҝ (HiTi Digital, Inc.) ʃଃ༆ҩʑר⋱ሳӛ᱿⼂⦡≟༫Ⴢ˶̬⪸˶Ŋʬʃଃяݽาकံᕇߌ༆ ҩҙૌ⦦ᆙ≟ⳍໞ᱿ံद⪭⪸ȯ
ۄᐻŘ
HiTi CS Card Printer ᆯ⦞ᶇẤ༬⊵˷ሷくҝ (HiTi Digital, Inc.) ᱿ɺΤٴᦽŊሷҢ˟᱿ۄᐻᲀરໞ଼ᅠ˟Ω׳⎊᱿
ᮟᓏሷ≛ȯ
ΎΔŘ
〦ᅠ֦֬ᑨ᱿ΎΔ᱿ጻ˴ُくӼጻᓰŊ⦼א≙ᮟٴᾼҙえԽ᱿ΎΔ⦦ᆙ֦ȯ
01
HiTi CS-200e ͐ᮢ⦦ᆙ
⨀෨ⴆႹ᱿ HiTi CS ֦֬ᑨŊʏʈଭʴキᅞ᱿ໞԼ〦ȯ
ᅘ᱿֦֬ᑨר˫⩕෨ˉט ᆞ᱿Ⴝ̳Ŋᆹʬ⩕෨⢌̳ӛ㋧༌֬᱿ٴ⫨߱׳ỚΤඖջ᱿⨢֦ȮΒᮢ֦Ȯሳڂُ֦൏ὁ
֦߱ᦸʀ᱿ະᮢȯ ⦼ᷨΎ෨͐ᮢ׆ೇဏͧ᱿≩ቨٴُⶪ˴ȯ
ᓥʴ⤟ሩघ᱿ΒŊ⦼⥏ۊໟΩ᱿ℐἿ: www.hiti.com .
⦼ᮢɺ㔄ᆹ⿵ʀℐ (www.hiti.com) ⥘ҩ֦֬ᑨ᱿ΎߗŊᯍરໞ⥘ҩʠരŊໟΩ૽ሳᩦզ෨ϝᣅߊ㈘ȯ
༆ҩ᱿Ჿ᱿ᆯՀ෨Ⳁᔎ᱿ʴ⤟෨᱿֦֬ᑨ᱿⥑હȯ ߱আ͐ᮢԊŊ⦼˝₳〇⩊͐ᮢ༆ҩŊʴ⤟ӷ֦֬ᑨُ᱿Լ
⋱ŊⳆ૽ሳՀُῃ෨મ⡶ُ͐ᮢ᱿ᆹ⿵ȯ ॖኞ෨ᱹҙૌʑሷ⼂⦡Ŋ⦼ᱹⲶヅઈⵞ˴ⳇᵧໟΩ [email protected] .
ߧᐻଅ༆ ʁӬ᱿ߧᐻଅ༆૽⠧ḻ༆ҩʑ᱿⸅⣬Β
᧚Ӳ⨸ḻ᱿بḻ ሩघᆙُᷨⳖɺᔎ᱿Β
02
HiTi CS-200e
使用說明
第一章 準備開始
1.1
檢視內容物
您的印卡機已經隨箱附帶一些配件，請您花一點時間仔細的檢查。
此印卡機箱裡的內容物，可能因為您所在的區域不同而有所變化。
如果下列任何一項物品有短缺，請在第一時間和您當地的經銷商聯繫。
與印卡機隨同的內容物：
退出卡槽 配重卡
USB
線 電源裝置 電源線
使用說明 安裝光碟片 集塵膠捲器
(含膠捲輪)
03
隨機簡易清潔組
1.2 ༌֬ᑨक⤐Լ⋱˛₺ ʀ╾〦ྈ⸹
LCM Ӽㄇኈ
༆ՒⳖ֦⚠
04
HiTi CS-200e ͐ᮢ⦦ᆙ
Ⳗ֦ᐥ╾
Ⳗ֦ᐥ( 100 ֦)
༆Ւ֦ઋ(ɺ⬚➦⃦⬚ઈ)
ᮟٴᐻ
ヅ〦ྈ⸹
USB ם
ヅם
ი҂ೣℐ⭰םᑁ(ⴆⶪ)
ი҂ೣᇘᦸ⩊૯ᑁ(ⴆⶪ)
ᥖㆊ
⏨࿉ᄍ⇦⚠(㆞⏨֒Ӡ)
⏨ᇘᦸတᐥ
HiTi CS-200e ͐ᮢ⦦ᆙ
֦ᦸׂಙ⦲ᄮጥ
ゝࢴ⍑࿉ݽᄍ⇦⚠
05
HiTi CS-200e ͐ᮢ⦦ᆙ
1.3 મ⡶ᅞೣ
1.3.1 ⏨મ⡶
͐ᮢ׆ೇ HiTi CS ֦֬ᑨဏͧ᱿⏨Ŋ૽ሳᷨΎ֦֬ᑨ᱿ᄓ⋱Ȯٴ⫨ُⴍ҉ⳍໞ˶̬〦᱿ံࣺȯ
͐ᮢ˶̬׆ೇ᱿⏨Ŋ૽ሳ܄दΎߗ᱿ᓏᲩȯ
ᷨΎሱ̈́ջ᱿Ӭ֬ᄓ⋱Ŋ⦼߱ᕓᓝሩဘ⏨᱿ᆹŊ͐ᮢᛤះ֦Ⳗ⠗ᛤះȯ a. ༌ʀ╾ b. တҘᇘᦸ֦⎏⏨ᇘᦸတᐥ c. ͩߧḻમ⡶⏨
⦼ᷨΎ⏨ỚㆩُᇘᦸᐻḻὪ
⦼ᷨΎમ⡶⏨ᆹŊ⏨⍍ଶʀʏʈᷨ⦓⏨࿉Ⱗ᱿㆞⏨⎞⏨ᄍ⇦⚠ d. ૽ʀ╾〦ʀ᳅ӷ⊖ㅨᔋ a b c d
06
HiTi CS-200e ͐ᮢ⦦ᆙ
1.3.2 ֦֬ᑨⳐ(ヅُ
USB
)
ヅ a. Ⳑヅℬӷヅ⡶⇦ŊᤋരⳐヅℬӷ֦֬ᑨὉ᱿ヅם b. Ⳑヅӷሷ߸ℬ᱿ヅͧະတಚ
⦼ᷨΎヅℬᆯⳐӷሷ६ۧΎ⩂ُ߸᱿ヅͧະ⚠ c. ۓ֦֬ᑨὉ᱿ヅ〦Ŋ⦼ᷨ⦓ LCM Ӽㄇኈㆴḻ ”Ready” Ŋ͗ᷨΎᑨݽ߱ഩᑨᨊ๗
ᣅʴᷨΎ෨⎊⯿᱿મҚŊ߱ࡠ⠗˶̬ሷ〦ᑨݽ᱿ΎℋΔ᱿Ւ̳ԊŊ⦼ᷨ⦓ヅတㆊᆯ⡕ཥぜ᱿ᨊ๗ a b c d
READY
USB
߱Ⳑ USB ℬӷ֦֬ᑨԊŊ⦼ᷨΎ֦֬ᑨ᱿㊪ՒⰖ㋤રҚ᱿⡕મ⡶રᯃ
⦼א≙༆ҩҙ᱿֦֬ᑨ㊪ՒⰖ㋤᱿મ⡶ᅞೣŊʏ˝₳᱿ͩᤫᔎ㊾Ⳗ⠗ȯ
07
HiTi CS-200e ͐ᮢ⦦ᆙ
1.3.3 ֦ᦸમ⇦ᅞೣ
⎊ՒⳖ֦
ᣅʴሱ̈́ջ᱿ٴ⫨Ŋ⦼͐ᮢ CR-80 ُ ISO 7810 ᐻ⣳ҙ᱿֦ᦸ͗Ӭ֬
⦼խ⤯ႄ֦ᦸ᱿Ӭ֬ㄇŊُⴍ҉͐ᮢ˶̬㋢ᖸȮטံȮ≒༿ُሷә᱿֦ᦸ͗Ⳗ⠗Ӭ֬Ւ̳
ᄍҘ֦ᦸ᱿ׂಙ⎞⦲ᄮጥ᱿ׂಙൕㅱɺ⎐Ŋ؋ԅሳሷघⳖ֦ᤀᘍⳖ֦᱿ۊ㆛ a. ༌Ⳗ֦ᐥ᱿ʀ╾ b. ͩߧḻᄍ⇦ʃỚㆩ᱿֦ᦸӷⳖ֦ᐥŊʏʈᄍҘⶪ⸅֦֦߱ᦸʀᅞ c. 〦ʀⳖ֦ᐥ᱿ʀ╾ a b c
֦ᦸׂಙ⦲ᄮỂ
༆ՒⳖ֦
Ⳇㅮ᧚ᔢ᱿⥑⤺ᆯᣅʴⳖ⠗܈֦တҘӬ֬⩊૯᱿Ւ̳
༆ՒⳖ֦ᆹŊト⣬ᄍҘⶪ⸅֦ᅠⳖ֦ᐥʑ a. ͩߧḻŊ༆ՒတҘ֦ᦸӷ༆ՒⳖ֦ᐥ b. আࡠ⠗Ӭ֬⩊૯᱿Ւ̳
08 a
༆Ւ֦
HiTi CS-200e ͐ᮢ⦦ᆙ
֦ᦸᄇゝ
ᯍӬ֬⩊૯Ւ̳રໞᆹŊҢ֦ᦸ૽ሳ⡕ⲵ⎏ⲵӛ֦ᐥŊ
ሱघר˫ૌₗ 50 0.8mm
ଙ᱿֦ᦸ
֦ᦸ⦲ᄮ
֦֬ᑨⶪሷ༆Ւ⦲ᄮ֦ᦸׂಙ᱿⡶⇦Ŋᯍʀ╾⡕ۓᆹŊҢ⡶⇦̤߱ᑨݽҙⵒȯ
֦ᦸׂಙ᱿ߣ᮫ 0.3mm
ӷ 1.0mm
᱿ଙŊ≟ӛೇ⥑હᆯ߱ 0.8mm
᱿ׂಙȯ a. ༌ᑨݽʀ╾ b. ͩト͐ᮢ֦ᦸ᱿ׂಙŊͩఢ⦲ᄮ֦ᦸׂಙ⦲ᄮጥ⎏ᔌᷨ᱿⥑હ c. 〦ʀᑨݽʀ╾ a b c
֦ᦸׂಙ⦲ᄮỂ
09
HiTi CS-200e ͐ᮢ⦦ᆙ
ὮʷὁŘӬ֬
2.1 મ⡶㊪ՒⰖ㋤
ᣅʴ෨⎊⯿મҚŊ߱ࡠ⠗˶̬ᑨݽΎℋΔՒ̳ԊŊ⦼ᷨΎヅℬ⚠ᅠቍⳐ᱿ᨊ๗
߱͐ᮢᮟٴԊŊଃᅠᔌᷨ᱿⥑હُᔌᷨ᱿મ⡶㊪ՒⰖ㋤ᆯɺㅮ⸅⣬᱿Ւ̳Ŋト⣬͐ᮢ≛⃛ʵ᧚Ӳ᱿ᘜาُ〦ᘜȯ ʃᔌᯍ᱿͐ᮢȮႽُ̳㊪ՒⰖ㋤મ⡶ᆯሳഛㅨӷӬ֬ٴ⫨᱿⸅⣬ߌ₪ʠɺȯ
ߌᔍŊྈⵒଔⳖ⠗મ⡶ُႽ̳Ŋᷨᄊ⩐〦⥑હאᄲᆯ⸅⣬᱿ȯ
ॖኞ˶̬⦲ᄮቍⳭӷㅷቅ᱿⠧ŊໟΩʬဏͧ෨૽֦֬ᑨുӷӛೇᆹ᱿׆͗⥑હϊ᱿⥑હᅞೣȯ
ᮟٴဏͧમ⡶҆ᷖᦸŊҙؐ Windows ౹שト᱿㊪ՒⰖ㋤ȯ
ॖኞҙૌ⇃ଇમ⡶҆ᷖᦸŊ⦼߱Ὦɺᆹ⿵ُ෨ᯍ߸᱿⺨ۄ⊓↙ȯ
મ⡶֦֬ᑨ᱿㊪ՒⰖ㋤ᆹŊ⦼҅૽મ⡶҆ᷖᦸᄍҘヅ⟩ʑ᱿҆ᷖᑨ⡶⇦ŊⴆႹ֦֬ᑨ㊪ՒⰖ㋤᱿Ჿ⻞ȯ
෨૽ሳ߱⎊Ւમ⡶Ễೣ᱿೧ʁરໞ㊪ՒⰖ㋤᱿મ⡶ȯ
Ⳑ USB ℬᆹŊ⦼ͩᤫ༆ҩҙ⥆ⰶ᱿ USB ℬ᱿Ⳑᅞೣ͗Ⳗ⠗ᔌᷨ᱿Ⳑ
ሷˀ Window sト⣬મ⡶㊪ՒⰖ㋤᱿ᮢңሷヅ⟩ᾷڂ᱿ᓏく
10
HiTi CS-200e ͐ᮢ⦦ᆙ
2.2 Ӭ֬⥑હ
͐ᮢ֦֬ᑨԊŊ⦼ൕㅱࡠ⠗ᷨ⦓ሩᄊ׆҅㓿⦓᱿⥑હȯ
Ⳇˀ⥑હծؐʁӬ᱿ⴆㅮ:
⏨Ớㆩ ֦ᦸỚㆩ ֦ᦸׂಙ Ң
⦼ᘜาُᮽา㊪ՒỄೣҙ᱿˶̬⥑હŊॖʃᷨહŊ߱ϝ˶̬ΔᄊԊŊ⦼ُ෨ᯍ߸᱿⺨ۄ⊓↙ʏחവՀȯ
ͩᤫʁӬ᱿ᔎ㊾רⳖҘӷӬ֬᱿⥑હ
ྈʁ̤ᅠ Windows ఢʁᅞ᱿আŊⴆႹ֦֬ᑨُЗ᳠ ⴆႹ֦֬ᑨʏʈྈ㔰⼫ⴆႹȵӬ֬۹॑⥑હȶ ӛɺΤ⥑⇦⥑હ᱿ଅ➔ౡ
⥑⇦⥑હ᱿Ჿ⻞ሷŘ֬⠧ᑨ⥑હȮӬ֬֒ࡍ⥑હȮ⏨ഔȮడңȮԽᥖ⋱⸇Ȯᷬጻ⻞ᷪȮ
ֈӛֈҘُ〦ᅠ
ሱ͐ᮢ᱿Ӭ֬⥑હᲿ⻞ሷŘ֬⠧ᑨ⥑હȮ⏨ഔُడң
⥑હⴆㅮ
⏨Ớㆩ
֦ᦸỚㆩ
֦ᦸׂಙ
ᔌ/וㄇߧ
Ӭ֬
͐ᮢ
Resin K
㆞⏨
㆞⏨۹॑⥑હ
᧚Ӳ⥑હ
㆞⏨⦲ᄮ
11
డң
Ӭ̤֬⇦⥑હ
ᛤះడңⴆㅮ
Ύℋ⩂⫏⤻
Ⳗべ⥑હ
Խᥖ⋱⸇⥑હ
HiTi CS-200e ͐ᮢ⦦ᆙ
ὮɿὁŘᛤះΎℋ⩂
3.1 ࡣΎߗጻᓰ⦦ᆙ
HiTi CS ֦ᦸ֦֬ᑨ᱿⥑⤺ᆯဏͧቅ᱿డ̳͐ᮢُଇ⸇᱿Ύℋ⩂Ւ̳トᖣȯ ˫⦼ͩᤫʁӬဏḻడ̳ŊଃᑨݽⳖ
⠗ɺˀ ܈᱿હቅΎŊ͗ᷨΎᑨݽטΎߗҙ᱿Ύ⩂ȯ
* ଃᅠᑨݽטΎߗҙ᱿Ύ⩂ᆯ⸅⣬᱿!! *
ॖบЭˉטΎߗ᱿ሺՖŊ⦼ՖൕᷨΎُްጁ᱿ࡠ⠗⣳᱿ᛤះΎℋ⩂᱿⣬ᖣŊ˫ד֦֬ᑨ᱿ᛤះⳕቅȯ
ॖሷ˶̬ʃࡠ⠗ὁῃ⣳હ᱿ᛤះΎℋ⩂᱿Ễ⣬ᖣŊ૽ሳ܄दᥖㆊ᱿Ύߗ
HiTi CS ֦֬ᑨଃᅠቍྈ⣬ᖣᛤះΎℋ⩂᱿֦֬ᑨʃ༫Ⴢ˶̬⪸˶ȯ
ᥖㆊᆯ֦֬ᑨҙҢ⸅⣬ُᄖȮᆞ≩ံ᱿׆˴ʠɺȯ
ᥖㆊ᱿͐ᮢउلሳߌᣅ֦֬ᑨش⳼᱿᭔ࣀ≟ഛㅨŊॖ᭔ࣀʑ᱿ᢝࢴȮ㋤ߗ㋤⫨┛֦߱ᦸʀᥖㆊȯ
͐ᮢ≛ൕㅱחɺӡᲵר⋱᱿〾ᅡŊʏʈⳖ⠗ᛤះ᱿Ւ̳ȯ
ᛤះడ̳᱿㆒᪓ُٴ⫨ᄓኞᆯೖᥖㆊ᱿͐ᮢउل˫דᷨΎ⏦॑᱿༌֬ٴ⫨᱿҅टᗉહߌ₪ȯ
˫͐ᮢ≛ൕㅱⴃભὁῃဏͧᑨݽᛤះΎℋ⩂᱿͐ᮢ⦦ᆙȯ
͐ᮢ׆ೇ᱿≩ቨ૽ሳഛㅨӬ֬᱿ٴ⫨ُרㄅඖŊⳍໞณԾ̥ٴ⫨᱿ⱚӛŊߌ≟᳅⿵᱿ഛㅨӷ֦֬ᑨ᱿డ̳ᄓ᪓ȯ
ᮟٴ᱿Ύߗጻ˴ߣʏʃծ͐ᮢ׆ೇ᱿≩ቨⳍໞ᱿˶̬᳅⿵ံࣺٴ⫨ʀ᱿ۊ㆛ȯ
12
HiTi CS-200e ͐ᮢ⦦ᆙ
3.2 હቅ᱿ᛤះΎ
֦֬ᑨሳʙՒဏḻ෨Ⳗ⠗ൕ⣬᱿ᛤះΎŊໟΩᣊ⩀෨߱ᄇӷᛤះဏḻരἼ֯Ⳗ⠗ᛤះՒ̳Ŋ؋ԅᥖㆊ
᱿Ύߗר⋱ߌᔍ≟दᄓȯ
ㅮᲿ
ഔ⏨/܈⏨
֦ᷬ⩊૯ㆊ
ㅱᛤះᄲ
400
400
13
3.2.1 ͐ᮢᛤះ֦
ᕓɺᲬ HiTi CS ׆ೇ᱿≩ቨҙŊ૽ሳえ⫾ɺᛤះ֦ᦸ(֦ᦸқㄇሷ㓸⍑⎞サࠣ⍍) a. ẼぜⳖ֦ᐥҙԘㇷ᱿֦ᦸ b. ᄍ⇦қㄇサࠣ⍍⡕႖࿚᱿ᛤះ֦ᦸӷⳖ֦ᐥ c. ⎏㊪ՒỄೣʑӬ֬۹॑⥑હƺడңƺᛤះడң ࡠ⠗ᛤះՒ̳ a b
HiTi CS-200e ͐ᮢ⦦ᆙ
14
HiTi CS-200e ͐ᮢ⦦ᆙ
3.2.2 ሰဘゝࢴ⍑࿉ݽ
ᕓɺᲬ HiTi CS ׆ೇ᱿≩ቨҙŊ૽ሳえ⫾ɺᄄゝࢴ⍑࿉ញⱐ
Ὦɺᓝ͐ᮢ...
a. ⎊ᑨݽⶪ˴Წʑחӛゝࢴ⍑࿉ݽ(ؐ⍑࿉ⱐ) b. ႖࿚ゝࢴ⍑࿉ⱐʀ᱿サࠣᑁŊҪ૽ゝࢴ⍑ֱݽᄍҘᑨשҙⳖ⠗ᛤះ
ሰဘゝࢴ⍑࿉ⱐ...
⎡ゝࢴ⍑࿉ⱐ
༌ʀ╾ חӛゝࢴ⍑࿉ݽ
ᅘゝࢴ⍑࿉ⱐ
૽⍑࿉ⱐֲʁ
ဘʀᅘ᱿⍑࿉ⱐԊŊ⦼҅૽⾪Ⱗ
⇦ᅠⱐൔ
૽⍑࿉ⱐ⡶⇦ᅠゝࢴ⍑࿉ݽʀ
15
૽ゝࢴ⍑࿉ݽᄍᅠᑨשҙⳖ⠗ᛤះ
(⦼⎏㊪ՒỄೣʑࡠ⠗)
3.2.3 ᛤះᥖㆊ
আᛤះᥖㆊʠԊŊ⦼Ֆൕᷨ⦓ヅတㆊᆯ⡕ཥぜ᱿ᨊ๗ ⴍ҉ᥖㆊ߱˶̬ᗼʁŊ⡕⸉଼Ȯଊ⺤༆྆Ⳗ⠗᳅⤯ᷤ
ᥖㆊُ〦ⶪ˴ະサⴍ҉טӷヅᄍヅ
ᣅʴᷨΎӬ֬᱿ٴ⫨Ŋᯍ⏨ሰဘ᱿ᆹαଔⳖ⠗ᔍᛤះՒ̳ a. ۓ֦֬ᑨ᱿ʀ╾Ŋᥖㆊ⡶⇦߱ʀ╾⚠ b. ⦼͐ᮢ HiTi CS ᛤះҙဏͧ᱿ᛤះ͗ᛤះᥖㆊ a b
HiTi CS-200e ͐ᮢ⦦ᆙ
16
Ὦ߈ὁ: ൢ֠Հ
4.1 ⨸بُ⼂⦡⤻᱿⥗ᅜ
HiTi CS ֦֬ᑨᆯરҚר˫᩸⎊̳ᏈŊʏʈ⩕͐ᮢ≛Ύྃ߱ଇ⸇᱿Ⴝ̳トᖣȯ
̟ᆯଃᅠɺˀࡣ᱿ᄑゃぜ⤻᱿ʴ⤟ŊⴒᆯሷՀ᱿ȯ
4.1.1 LCM Ӽㄇኈ
ࡣ⦦ᆙ
ᮟٴⶪЈ᱿ɺΤ LCM ӼㄇኈŊծؐɺΤ LCD ㆴḻȮ߈Τྈ⸹ُқΤ LED Β⚦ᥨ᱿ȯ
ሷ⨸بُ⼂⦡᱿⤻૽ሳഺⳆㄇኈㆴḻӛ͗ȯ
HiTi CS-200e ͐ᮢ⦦ᆙ ⲙߊʙㅪ
ㅪㄇӡဘ
ㅪㄇӡဘ
ⳖҘ/⥑હ/ᷨ⦓
ℂᥨ/ᔌ
ᥨ/⼂⦡
17
HiTi CS-200e ͐ᮢ⦦ᆙ
4.1.2 Ӽㄇᦹ᱿⨸ḻ⤻
⨸ḻ⤻
Cover Open
Flipper Cover Open
IC Chip Missing
Ribbon Missing
Ribbon Mismatch
Ribbon Type Error
Ribbon Out
Print Fail
Card Out
Card Jam
Card Mismatch
Cam Error
Flipper Error
Ribbon Error
⦦ᆙ
ᑨݽʀ╾ۓ
≒ㄇᑁʀ╾ۓ
⏨ᇘᦸ֦ቍમ⡶
⏨ቍમ⡶
⏨⎞ᇘᦸʃὪ ʃᄄိᔍ⏨
ᒑው⏨Ւ̳दᄜ
⏨͐ᮢરᯃ
Ӭ֬Ւ̳दᄜ
֦ᦸ͐ᮢરᯃ
֦ᦸׂಙ⦲ᄮݽ⎞͐ᮢ᱿֦ᦸׂಙʃɺ⎐
֦ᦸ⎞֦ᦸʠ⿵᱿ؚえԻ(ヅ)ठ
Ӭ֬⳧Ễʑ֦ᦸ֦ᅠᑨݽҙⵒŊᤀᘍરໞӬ֬דӛ֦
֦ᦸỚㆩʃὪ
ᑨݽҙⵒ˴ံࣺ
≒ㄇᑁᤀᘍՒ̳
ᇘᦸᱹᮝ⼂⦡
⤟ᗉᅞೣ
〦ʀᑨݽʀ╾
〦ʀ≒ㄇᑁʀ╾
တҘ⏨ᇘᦸ֦
⡶Ҙ⏨
ᒑው⏨⎞ᇘᦸᆯ؋ㆩࠣ
ᒑው⏨Ớㆩ
Ҫᓝ⸅ᅘમ⡶⏨
મ⡶ᅘ⏨
⦼ᒑው⏨ᆯ؋ᅜ⡣Ŋᅜ⡣⦼⸅ᅘߊ⏨
ᄍ⇦ᅘ֦ᦸ
ᷨ⦓֦ᦸׂಙ⦲ᄮᆯ؋ᔌᷨ
҅૽֦ᦸᄣҪ⸅ᅘᄮᄍҘⳖ֦ᐥʑ
ͩᤫㄇᦹʀ᱿֦Ễࡠ⠗֦Ւ̳
͐ᮢᐻ CS-80 ֦ᦸ
⊓↙ᯍ߸⺨ۄ
⊓↙ᯍ߸⺨ۄ
⸅ᅘમ⡶ሩᅘᇘᦸ
18
4.2 ᒑ⣶㊪ՒỄમ⡶᱿ᦹ
෨ר˫ ᆞ᱿ഺ෨᱿ヅ⟩ʑŊમ⡶᱿֦֬ᑨҙ᱿଼ඖⴆ܈ʑʴ⤟મ⡶᱿㊪ՒỄೣᦹȯ
⩀෨らᆹʃહቅ᱿ഺໟΩ᱿ષᅞℐἿʑʁⰶሱᅘ᱿㊪ՒỄೣᦹȯ
෨ר˫ͩᤫʁӬ᱿ᔎ㊾ʴ⤟㊪ՒỄೣમ⡶᱿ᦹ
HiTi CS-200e ͐ᮢ⦦ᆙ
19
HiTi CS-200e ͐ᮢ⦦ᆙ
4.3 ᄑゃぜ
4.3.1 ֦֬ᑨ᱿ᄑゃۊ㆛
ᗞሷᱹᮝ˶̬Ւ̳
Ӭ֬ӛἇᱺ֦ᦸ
ⵒ˷⼂⦡Ӭ֬
Ӭ֬ӛᬙᯮ㔄
Ӭ֬ӛᱺ⏨ᑲℬ
Ӭ֬ӛᱺ⏨᳅ℬ
Ӭ֬ӛᑁߧЭ
ᒑው֦֬ᑨ᱿㊪ՒỄೣᆯ؋મ⡶ᔌᷨ
ᒑውヅُ USB ℬㆊ
ᒑው⏨ُ֦ᦸ
Ӭ֬ᛵ⥶ߧ֦
ᒑው⏨
⦼⎏㊪ՒỄೣʑӬ֬۹॑⥑હʠ [డң]ŊᒑውӬ̤֬⇦ዮᔌ᱿Aϊř⩀૽Aϊߊു׆ೇ⥑હϊݏ⥶Ӭ֬
⦼ᒑው͐ᮢʠ֦ᦸᆯ؋ὪCR-80ʠ⣳ጁ
ᒑው֦֬ᑨ᱿⥑હ
ᒑውⳐℬُ⏨
ᷨ⦓ᛤះញⱐᆯ؋ʯᛍ᱿
ᒑው֦ᦸᆯ؋ᛤះ
ᒑውᥖㆊ
֦ᦸ᱿⠧ㄇר⋱טᖸዀ
⦼͐ᮢᛤះ֦Ⳗ⠗ᛤះ
ᥖㆊר⋱טぁࢩ
ᒑውᆯ؋ト⣬ሩဘゝࢴ⍑࿉ⱐ
ᒑው⏨ᆯ؋મ⡶ᔌᷨ
ᒑውᥖㆊᆯ؋טᖸዀטံ
ᥖㆊר⋱טံ
ᒑው⏨ᆯ؋મ⡶ᔌᷨ
ᒑውᛤះញⱐᥖㆊᆯ؋טᖸዀ
ᒑው֦ᦸᆯ؋ʢ⣳ጁ
20
4.3.2 ぜप֦
ᯍप֦ᱹᮝᆹŊ⦼Ἴ֯ϟᔋӬ֬Ŋͩᤫ LCM Ӽㄇᦹ᱿྆ḻŊ૽֦̦᱿֦ᦸぜȯ
༌ᑨݽʀ╾
Ẽぜ⏨
ͩᤫ LCM Ӽㄇᦹ᱿྆ḻⳖ⠗Ւ̳Ř⎊ՒȮ֚⎊Ւُ༆Ւ֦
Ⳗ⠗֚⎊Ւ༆Ւ֦ᆹŊ⦼խ૽෨᱿༆ᄍҘ֦֬ᑨҙ
෨ʬר˫ࡠ⠗ʁӬ⩀ʶㅮ͗ⴍ҉प֦Ř
ഺ㊪ՒỄೣُ֦ᦸׂಙ⦲ᄮጥʑŊ⥑હᔌ֦ᷨᦸׂಙ
ͩᤫ༆ҩ᱿⣳ҙૌʑŊ͐ᮢᔌᷨ᱿֦ᦸỚㆩ
ᒑ⣶͐ᮢ᱿֦ᦸᆯ؋౹ᄮ
㌂ᄣ֦ᦸŊॖኞ֦ᦸᱹᮝ㓸⫅⩽
༆Ւ֦ߧḻ⦦ᆙŘ
ㅯᆹ⸒ᅞᅩⱧ
HiTi CS-200e ͐ᮢ⦦ᆙ ɺ⬚ઈ
21
4.4 ༬⠛ᄄိ
ॖኞ෨ᱹᮝሷ˶̬ߔザ⥑હ⦲ᄮ֦֬ᑨŊ⦼˝₳〇⩊༆ҩȯ
ᯍ෨ᤀᘍ⎊⠗⤟ᗉぜۊ㆛ᆹŊ෨ר˫らᆹ⦼ᖣᯍ߸⺨ۄℋ⩂ʑൔ᱿֠Հُᄄိȯ
ᯍᤀᘍ⤟ᗉぜۊ㆛ᱹᮝᆹŊॖኞ෨ʃᵧⳬॖ̬⊓↙ᯍ߸⺨ۄℋ⩂ʑൔᆹŊ
෨ר˫⥏ۊໟΩ᱿ષℐ ( www.hiti.com
) חവ⊓↙⫏⤻ʏʈໟΩဏۊȯ
ໟΩ૽ሳബ㋧⎟᱿らᆹᣅ෨ሺՖȯ
ᯍଁᖣ֠ՀᆹŊ⦼෨ൢ֠ՀဏͧʁӬ⸅⣬⫏⤻:
֦֬ᑨ᱿ࠣ⚦ُӬ⚦ᷪ
ᯍᆹ͐ᮢ᱿⥑હُヅ⟩̳Ꮘ₇⃥᱿ᦹ
˝₳ᄝⲩۊ㆛᱿ᱹᮝ⳧
˝₳ᄝⲩ෨͐ᮢ˶̬᱿ᔎ㊾ᅞೣ͗ݏ⥶⤟ᗉۊ㆛
ॖኞ෨ト⣬˶̬ሩघ᱿֠ՀُൢŊ෨ר˫ഺໟΩ᱿ષℐ ( www.hiti.com
) ʀחവሱᅘ᱿⫏⤻Ŋ ծ㊪ՒỄೣȮㅊ㋤Ȯ͐ᮢ༆ҩُۊ⎞ᾊゝȯ
HiTi CS-200e ͐ᮢ⦦ᆙ
22
A:
HiTi CS-200e
300dpi
USB
64MB
50
LED
/ 1MB
(0.8mm/30mil)
1 (YMCKO) = 20
1 = 5
IBM
Pentium R / 133MHz
2000/XP/Vista
128MB 100MB
Windows 2000/XP/Vista/Windows 7 (32 & 64 bits)
Mac Linux
HiTi CardDésirée CS
MS Excel
Windows 2000/XP/Vista/7
HiTi CS-200e
23
⏨≩ቨỚㆩ ⴆ⫵ⶪЈ
Ύߗጻ˴
Ң˟
YMCKO
ഔ⏨⏨Ř
400
ㄇ/࿉
YMCKO ֚ᦹഔ⏨⏨Ř 560 ㄇ/࿉
܈⏨⏨Ř
1000
ㄇ/࿉ (㓺⏨)
400 ㋧ૌ⸇Ⳗ֦ᐥ
≒ㄇᑁ
ᷬጻ֦⩊૯ᑁ (ISO 7811 HiCo/LoCo or JIS2)
IC ᇘᦸ֦⩊૯ᑁ (ISO 7816-2 / PC / SC, EMV2000-1)
⤯ೣ֦⩊૯ᑁ
(ISO 14443A & B, 15693)
ℐ⭰ᑁ
ͩ⺨ڰ֒ࡍ≟ʃŊ⦼ᙛᯍ߸⺨ۄ
֦ᦸỚㆩŘ PVC ֦
֦ᦸ⣳ጁŘ
ISO CR-80 / ISO 7810 (53.98mm x 85.60mm)
֦ᦸׂಙŘ 0.3mm(10mil) ~ 1.0mm(40mil) ; キㄇӬ֬Ř 0.5mm
˫ʀ
Ⳗ ֦ ᐥŘ
100
֦ᦸ
(0.8mm/30mil) ӛ ֦ ᐥŘ 50 ֦ᦸ (0.8mm/30mil)
㋤ỬଙŘ 197.8mm(W) x 354mm(L) x 204mm(H)
⸅ ⸇Ř
4.9
ҝᅏ
ⳐᅞೣŘ USB םℐ⭰ם(ⴆ⫵ⶪЈ)Ŋ(ʨठℐ⭰ 10/100 Mbps )
ヅ Ř
AC input: 100~240V ~ 2.5A, 50~60Hz / DC output: 24V=4.16A
Ⴝ̳᭔ࣀŘ 15~32 ಙ / 20%~85% ଃಙ
Ѳએ᭔ࣀŘ -20~60 ಙ / 20%~90% ଃಙ
డ̳᭔ࣀŘⳇㆺ᱿ᄍἇ⿵
HiTi CS-200e ͐ᮢ⦦ᆙ
24
HiTi CS-200e
使用說明
Appendix B FCC Compliance Statement
1. Notice : The changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
2.IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements,no change to the
antenna or the device is permitted. Any change to the antenna or the device could
result in the device exceeding the RF exposure requirements and void user’s
authority to operate the device.
3. FCC INFORMATION:
The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph:
The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation.If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
The user should not modify or change this equipment without written approval
Form HiTi Digital Inc. Modification could void authority to use this equipment.
25
HiTi CS-200e ͐ᮢ⦦ᆙ
聲明
第一章: 準備開始
1.1 檢視內容物
1.2 證卡機外觀功能
1.3 安裝方式
1.3.1 卡片收集
1.3.2 卡片調整
1.3.3 卡片安置方式
第二章: 打印
2.1 安裝驅動軟體
2.2 打印設定
第三章: 清潔保養維護
3.1 基本保固條款說明
3.2 定期的清潔保養
3.2.1 使用清潔卡
3.2.2 替換集塵膠捲器
3.2.3 清潔熱感應頭
第四章: 幫忙協助
4.1 警告和錯誤訊息的診斷
4.1.1 LCD 控制面版
4.1.2 控制面版的警示訊息
4.2 檢視驅動程式安裝的版本
4.3 故障排除
4.3.1 證卡機的故障問題
4.3.2 排除夾卡
4.4 技術支援
附錄 A: 技術規格
附錄
B: FCC 安規說明
HiTi CS-200e
使用說明
18
19
20
20
16
17
17
17
21
22
23
25
12
13
14
15
10
10
11
12
06
06
07
08
01
03
03
04
HiTi CS-200e ͐ᮢ⦦ᆙ
HiTi CS Card Printer ©2011 ౺ȯ ᦹᓏሷȯ
͐ᮢ≛ൕㅱ⸅Ң߱ߡሷ〦ᦹᓏ᱿⠗⣳હȯ ͐ᮢ༆ҩ߱ቍ⳧⦞ᶇẤ༬⊵˷ሷくҝ (HiTi Digital, Inc.) ᆙᷨ᱿
ሬㄇ࿙ᓏ˫Ԋʃവ˫˶᮫̬Ȯ˶̬ᅞೣ⡕ⵒ˷Қⵒ⢒⢌Ȯ⢒֬Ȯ≒⨿ȮЗႩŊᤀ⧄ᆯヅઈᦹȮᄽᦹ˫˶̬ࠣ
ೣ᱿ᅞೣاȯ
༆ҩҙծؐ᱿˶̬ΒȮᄽ˴ᄽॖሷ⩐ሩŊපʃנ⠗ⳇᵧȯ
⦞ᶇẤ༬⊵˷ሷくҝ (HiTi Digital, Inc.) ʃଃ༆ҩʑר⋱ሳӛ᱿⼂⦡≟༫Ⴢ˶̬⪸˶Ŋʬʃଃяݽาकံᕇߌ
༆ҩҙૌ⦦ᆙ≟ⳍໞ᱿ံद⪭⪸ȯ
HiTi CS Card Printer ᆯ⦞ᶇẤ༬⊵˷ሷくҝ (HiTi Digital, Inc.) ᱿ɺΤٴᦽŊሷҢ˟᱿ۄᐻᲀરໞ଼ᅠ˟Ω׳⎊᱿
ᮟᓏሷ≛ȯ
〦ᅠ⨢֦ᑨ᱿ΎΔ᱿ጻ˴ُくӼጻᓰŊ⦼א≙ᮟٴᾼҙえԽ᱿ΎΔ⦦ᆙ֦ȯ
01
HiTi CS-200e ͐ᮢ⦦ᆙ
⨀෨ⴆႹ᱿ HiTi CS ⨢֦ᑨŊʏʈଭʴキᅞ᱿ໞԼ〦ȯ
ᅘ᱿⨢֦ᑨר˫⩕෨ˉט ᆞ᱿Ⴝ̳Ŋᆹʬ⩕෨⢌̳ӛ㋧༌֬᱿ٴ⫨߱׳ỚΤඖջ᱿⨢֦ȮΒᮢ֦Ȯሳڂُ֦൏ὁ
֦߱ᦸʀ᱿ະᮢȯ ⦼ᷨΎ෨͐ᮢ׆ೇဏͧ᱿≩ቨٴُⶪ˴ȯ
ᓥʴ⤟ሩघ᱿ΒŊ⦼⥏ۊໟΩ᱿ℐἿ: www.hiti.com .
⦼ᮢɺ㔄ᆹ⿵ʀℐ (www.hiti.com) ⥘ҩ⨢֦ᑨ᱿ΎߗŊᯍરໞ⥘ҩʠരŊໟΩ૽ሳᩦզ෨ϝᣅߊ㈘ȯ
༆ҩ᱿Ჿ᱿ᆯՀ෨Ⳁᔎ᱿ʴ⤟෨᱿⨢֦ᑨ᱿⥑હȯ ߱আ͐ᮢԊŊ⦼˝₳〇⩊͐ᮢ༆ҩŊʴ⤟ӷ⨢֦ᑨُ᱿Լ
⋱ŊⳆ૽ሳՀُῃ෨મ⡶ُ͐ᮢ᱿ᆹ⿵ȯ ॖኞ෨ᱹҙૌʑሷ⼂⦡Ŋ⦼ᱹⲶヅઈⵞ˴ⳇᵧໟΩ [email protected] .
ߧᐻଅ༆ ʁӬ᱿ߧᐻଅ༆૽⠧ḻ༆ҩʑ᱿⸅⣬Β
᧚Ӳ⨸ḻ᱿بḻ ሩघᆙُᷨⳖɺᔎ᱿Β
02
HiTi CS-200e
使用說明
1.1
檢視內容物
您的證卡機已經隨箱附帶一些配件，請您花一點時間仔細的檢查。
此證卡機箱裡的內容物，可能因為您所在的區域不同而有所變化。
如果下列任何一項物品有短缺，請在第一時間和您當地的經銷商聯繫。
退出卡槽 配重卡 USB 線 電源裝置 電源線
使用說明 安裝光盤 集塵膠捲器
(含膠捲輪)
03
隨機簡易清潔組
1.2 ⨢֦ᑨक⤐Լ⋱˛₺ ʀ╾〦ྈ⸹
LCM Ӽㄇኈ
༆ՒⳖ֦⚠
04
HiTi CS-200e ͐ᮢ⦦ᆙ
Ⳗ֦ᐥ╾
Ⳗ֦ᐥ( 100 ֦)
༆Ւ֦ઋ(ɺ⬚➦⃦⬚ઈ)
ᮟٴᐻ
ヅ〦ྈ⸹
USB ם
ヅם
ი҂ೣℐ⭰םᑁ(ⴆⶪ)
ი҂ೣᇘᦸ⩊૯ᑁ(ⴆⶪ)
ᥖㆊ
⏨࿉ᄍ⇦⚠(㆞⏨֒Ӡ)
⏨ᇘᦸတᐥ
HiTi CS-200e ͐ᮢ⦦ᆙ
֦ᦸׂಙ⦲ᄮጥ
ゝࢴ⍑࿉ݽᄍ⇦⚠
05
HiTi CS-200e ͐ᮢ⦦ᆙ
1.3 મ⡶ᅞೣ
1.3.1 ⏨મ⡶
͐ᮢ׆ೇ HiTi CS ⨢֦ᑨဏͧ᱿⏨Ŋ૽ሳᷨΎ⨢֦ᑨ᱿ᄓ⋱Ȯٴ⫨ُⴍ҉ⳍໞ˶̬〦᱿ံࣺȯ
͐ᮢ˶̬׆ೇ᱿⏨Ŋ૽ሳ܄दΎߗ᱿ᓏᲩȯ
ᷨΎሱ̈́ջ᱿༌֬ᄓ⋱Ŋ⦼߱ᕓᓝሩဘ⏨᱿ᆹŊ͐ᮢᛤះ֦Ⳗ⠗ᛤះȯ a. ༌ʀ╾ b. တҘᇘᦸ֦⎏⏨ᇘᦸတᐥ c. ͩߧḻમ⡶⏨
⦼ᷨΎ⏨ỚㆩُᇘᦸᐻḻὪ
⦼ᷨΎમ⡶⏨ᆹŊ⏨⍍ଶʀʏʈᷨ⦓⏨࿉Ⱗ᱿㆞⏨⎞⏨ᄍ⇦⚠ d. ૽ʀ╾〦ʀ᳅ӷ⊖ㅨᔋ a b c d
06
HiTi CS-200e ͐ᮢ⦦ᆙ
1.3.2 ⨢֦ᑨⳐ(ヅُ
USB
)
ヅ a. Ⳑヅℬӷヅ⡶⇦ŊᤋരⳐヅℬӷ⨢֦ᑨὉ᱿ヅם b. Ⳑヅӷሷ߸ℬ᱿ヅͧະတಚ
⦼ᷨΎヅℬᆯⳐӷሷ६ۧΎ⩂ُ߸᱿ヅͧະ⚠ c. ۓ⨢֦ᑨὉ᱿ヅ〦Ŋ⦼ᷨ⦓ LCM Ӽㄇኈㆴḻ ”Ready” Ŋ͗ᷨΎᑨݽ߱ഩᑨᨊ๗
ᣅʴᷨΎ෨⎊⯿᱿મҚŊ߱ࡠ⠗˶̬ሷ〦ᑨݽ᱿ΎℋΔ᱿Ւ̳ԊŊ⦼ᷨ⦓ヅတㆊᆯ⡕ཥぜ᱿ᨊ๗ a b c d
READY
USB
߱Ⳑ USB ℬӷ⨢֦ᑨԊŊ⦼ᷨΎ֦֬ᑨ᱿㊪ՒⰖ㋤રҚ᱿⡕મ⡶રᯃ
⦼א≙༆ҩҙ᱿⨢֦ᑨ㊪ՒⰖ㋤᱿મ⡶ᅞೣŊʏ˝₳᱿ͩᤫᔎ㊾Ⳗ⠗ȯ
07
HiTi CS-200e ͐ᮢ⦦ᆙ
1.3.3 ֦ᦸમ⇦ᅞೣ
ᣅʴሱ̈́ջ᱿ٴ⫨Ŋ⦼͐ᮢ CR-80 ُ ISO 7810 ᐻ⣳ҙ᱿֦ᦸ͗༌֬
⦼խ⤯ႄ֦ᦸ᱿༌֬ㄇŊُⴍ҉͐ᮢ˶̬㋢ᖸȮטံȮ≒༿ُሷә᱿֦ᦸ͗Ⳗ⠗༌֬Ւ̳
ᄍҘ֦ᦸ᱿ׂಙ⎞⦲ᄮጥ᱿ׂಙൕㅱɺ⎐Ŋ؋ԅሳሷघⳖ֦ᤀᘍⳖ֦᱿ۊ㆛ a. ༌Ⳗ֦ᐥ᱿ʀ╾ b. ͩߧḻᄍ⇦ʃỚㆩ᱿֦ᦸӷⳖ֦ᐥŊʏʈᄍҘⶪ⸅֦֦߱ᦸʀᅞ c. 〦ʀⳖ֦ᐥ᱿ʀ╾ a b c
֦ᦸׂಙ⦲ᄮỂ
Ⳇㅮ᧚ᔢ᱿⥑⤺ᆯᣅʴⳖ⠗܈֦တҘ༌֬⩊૯᱿Ւ̳
༆ՒⳖ֦ᆹŊト⣬ᄍҘⶪ⸅֦ᅠⳖ֦ᐥʑ a. ͩߧḻŊ༆ՒတҘ֦ᦸӷ༆ՒⳖ֦ᐥ b. আࡠ⠗༌֬⩊૯᱿Ւ̳
08
a
༆Ւ֦
HiTi CS-200e ͐ᮢ⦦ᆙ
ᯍ༌֬⩊૯Ւ̳રໞᆹŊҢ֦ᦸ૽ሳ⡕ⲵ⎏ⲵӛ֦ᐥŊ
ሱघר˫ૌₗ 50 0.8mm
ଙ᱿֦ᦸ
⨢֦ᑨⶪሷ༆Ւ⦲ᄮ֦ᦸׂಙ᱿⡶⇦Ŋᯍʀ╾⡕ۓᆹŊҢ⡶⇦̤߱ᑨݽҙⵒȯ
֦ᦸׂಙ᱿ߣ᮫ 0.3mm
ӷ 1.0mm
᱿ଙŊ≟ӛೇ⥑હᆯ߱ 0.8mm
᱿ׂಙȯ a. ༌ᑨݽʀ╾ b. ͩト͐ᮢ֦ᦸ᱿ׂಙŊͩఢ⦲ᄮ֦ᦸׂಙ⦲ᄮጥ⎏ᔌᷨ᱿⥑હ c. 〦ʀᑨݽʀ╾ a b c
֦ᦸׂಙ⦲ᄮỂ
09
HiTi CS-200e ͐ᮢ⦦ᆙ
2.1 મ⡶㊪ՒⰖ㋤
ᣅʴ෨⎊⯿મҚŊ߱ࡠ⠗˶̬ᑨݽΎℋΔՒ̳ԊŊ⦼ᷨΎヅℬ⚠ᅠቍⳐ᱿ᨊ๗
߱͐ᮢᮟٴԊŊଃᅠᔌᷨ᱿⥑હُᔌᷨ᱿મ⡶㊪ՒⰖ㋤ᆯɺㅮ⸅⣬᱿Ւ̳Ŋト⣬͐ᮢ≛⃛ʵ᧚Ӳ᱿ᘜาُ〦ᘜȯ ʃᔌᯍ᱿͐ᮢȮႽُ̳㊪ՒⰖ㋤મ⡶ᆯሳഛㅨӷ༌֬ٴ⫨᱿⸅⣬ߌ₪ʠɺȯ
ߌᔍŊྈⵒଔⳖ⠗મ⡶ُႽ̳Ŋᷨᄊ⩐〦⥑હאᄲᆯ⸅⣬᱿ȯ
ॖኞ˶̬⦲ᄮቍⳭӷㅷቅ᱿⠧ŊໟΩʬဏͧ෨૽֦֬ᑨുӷӛೇᆹ᱿׆͗⥑હϊ᱿⥑હᅞೣȯ
ᮟٴဏͧમ⡶҆ᲷŊҙؐ Windows ౹שト᱿㊪ՒⰖ㋤ȯ
ॖኞҙૌ⇃ଇમ⡶҆ᲷŊ⦼߱Ὦɺᆹ⿵ُ෨ᯍ߸᱿⺨ۄ⊓↙ȯ
મ⡶⨢֦ᑨ᱿㊪ՒⰖ㋤ᆹŊ⦼҅૽મ⡶҆ᲷᄍҘ⤺ᾰᑨʑ᱿҆Ჷ⡶⇦ŊⴆႹ⨢֦ᑨ㊪ՒⰖ㋤᱿Ჿ⻞ȯ
෨૽ሳ߱⎊Ւમ⡶Ễೣ᱿೧ʁરໞ㊪ՒⰖ㋤᱿મ⡶ȯ
Ⳑ USB ℬᆹŊ⦼ͩᤫ༆ҩҙ⥆ⰶ᱿ USB ℬ᱿Ⳑᅞೣ͗Ⳗ⠗ᔌᷨ᱿Ⳑ
ሷˀ Window sト⣬મ⡶㊪ՒⰖ㋤᱿ᮢңሷ⤺ᾰᑨᾷڂ᱿ᓏく
10
HiTi CS-200e ͐ᮢ⦦ᆙ
2.2 ༌֬⥑હ
͐ᮢ⨢֦ᑨԊŊ⦼ൕㅱࡠ⠗ᷨ⦓ሩᄊ׆҅㓿⦓᱿⥑હȯ
Ⳇˀ⥑હծؐʁӬ᱿ⴆㅮ:
⏨Ớㆩ ֦ᦸỚㆩ ֦ᦸׂಙ Ң
⦼ᘜาُᮽา㊪ՒỄೣҙ᱿˶̬⥑હŊॖʃᷨહŊ߱ϝ˶̬ΔᄊԊŊ⦼ُ෨ᯍ߸᱿⺨ۄ⊓↙ʏחവՀȯ
ͩᤫʁӬ᱿ᔎ㊾רⳖҘӷ༌֬᱿⥑હ
ྈʁ̤ᅠ Windows ఢʁᅞ᱿আŊⴆႹ֦֬ᑨُЗ᳠ ⴆႹ⨢֦ᑨʏʈྈ㔰⼫ⴆႹȵ༌֬۹॑⥑હȶ ӛɺΤ⥑⇦⥑હ᱿ଅ➔ౡ
⥑⇦⥑હ᱿Ჿ⻞ሷŘ⨢֦ᑨ⥑હȮ༌֬֒ࡍ⥑હȮ⏨ഔȮడңȮԽᥖ⋱⸇Ȯᷬጻ⻞ᷪȮ
ֈӛֈҘُ〦ᅠ
ሱ͐ᮢ᱿༌֬⥑હᲿ⻞ሷŘ⨢֦ᑨ⥑હȮ⏨ഔُడң
⥑હⴆㅮ
⏨Ớㆩ
֦ᦸỚㆩ
֦ᦸׂಙ
ᔌ/וㄇߧ
༌֬
͐ᮢ Resin K
㆞⏨
㆞⏨۹॑⥑હ
᧚Ӳ⥑હ
㆞⏨⦲ᄮ
11
డң
༌̤֬⇦⥑હ
ᛤះడңⴆㅮ
Ύℋ⩂⫏⤻
Ⳗべ⥑હ
Խᥖ⋱⸇⥑હ
HiTi CS-200e
使用說明
3.1
基本保固條款說明及安全規範
HiTi CS 證卡機的設計是提供長期的工作使用和少量的保養維護動作需求。 所以請依照下列提示工作，對機器進行一
些簡單的定期保養，來確保機器受保固內的保護。
* 對於機器受保固內的保護是非常重要的!! *
如想像享受保固的服務，請務必確保和嚴格的執行常規的清潔保養維護的要求，以及證卡機的清潔週期。
如有任何不執行本章節所規定的清潔保養維護的程序要求，將會喪失熱感頭的保固
警告:僅適用于非熱帶氣候條件下安全使用
警告:僅適用于海拔 2000m 以下地區安全使用
HiTi CS 證卡機對於未按要求清潔保養維護的證卡機不承擔任何責任。
熱感頭是證卡機內其重要和敏感、易耗損的原件之一。
熱感頭的使用壽命會因為印卡機周遭的環境而影響，如環境中的灰塵、液體或固體物質落在卡片上或熱感頭。
使用者必須採取一切盡可能的防範措施，並且進行清潔的動作。
清潔工作的頻率和品質效果是延長熱感頭的使用壽命以及確保良好的打印品質的先天決定因素。
所以使用者必須遵守本章節所提供機器清潔保養維護的使用說明。
使用非原廠的耗材將會影響打印的品質和可靠性，造成惡劣低品質的輸出，因而直接或間接的影響到證卡機的工作效率。
本產品的保固條件範圍並不包括使用非原廠的耗材所造成的任何直接或間接損壞或品質上的問題。
12
HiTi CS-200e ͐ᮢ⦦ᆙ
3.2 હቅ᱿ᛤះΎ
⨢֦ᑨሳʙՒဏḻ෨Ⳗ⠗ൕ⣬᱿ᛤះΎŊໟΩᣊ⩀෨߱ᄇӷᛤះဏḻരἼ֯Ⳗ⠗ᛤះՒ̳Ŋ؋ԅᥖㆊ
᱿Ύߗר⋱ߌᔍ≟दᄓȯ
ㅮᲿ
ഔ⏨/܈⏨
֦ᷬ⩊૯ㆊ
ㅱᛤះᄲ
400
400
13
3.2.1 ͐ᮢᛤះ֦
ᕓɺᲬ HiTi CS ׆ೇ᱿≩ቨҙŊ૽ሳえ⫾ɺᛤះ֦ᦸ(֦ᦸқㄇሷ㓸⍑⎞サࠣ⍍) a. ẼぜⳖ֦ᐥҙԘㇷ᱿֦ᦸ b. ᄍ⇦қㄇサࠣ⍍⡕႖࿚᱿ᛤះ֦ᦸӷⳖ֦ᐥ c. ⎏㊪ՒỄೣʑ༌֬۹॑⥑હƺడңƺᛤះడң ࡠ⠗ᛤះՒ̳ a b
HiTi CS-200e ͐ᮢ⦦ᆙ
14
HiTi CS-200e ͐ᮢ⦦ᆙ
3.2.2 ሰဘゝࢴ⍑࿉ݽ
ᕓɺᲬ HiTi CS ׆ೇ᱿≩ቨҙŊ૽ሳえ⫾ɺᄄゝࢴ⍑࿉ញⱐ
Ὦɺᓝ͐ᮢ...
a. ⎊ᑨݽⶪ˴Წʑחӛゝࢴ⍑࿉ݽ(ؐ⍑࿉ⱐ) b. ႖࿚ゝࢴ⍑࿉ⱐʀ᱿サࠣᑁŊҪ૽ゝࢴ⍑ֱݽᄍҘᑨשҙⳖ⠗ᛤះ
ሰဘゝࢴ⍑࿉ⱐ...
⎡ゝࢴ⍑࿉ⱐ
༌ʀ╾ חӛゝࢴ⍑࿉ݽ
ᅘゝࢴ⍑࿉ⱐ
૽⍑࿉ⱐֲʁ
ဘʀᅘ᱿⍑࿉ⱐԊŊ⦼҅૽⾪Ⱗ
⇦ᅠⱐൔ
૽⍑࿉ⱐ⡶⇦ᅠゝࢴ⍑࿉ݽʀ
15
૽ゝࢴ⍑࿉ݽᄍᅠᑨשҙⳖ⠗ᛤះ
(⦼⎏㊪ՒỄೣʑࡠ⠗)
3.2.3 ᛤះᥖㆊ
আᛤះᥖㆊʠԊŊ⦼Ֆൕᷨ⦓ヅတㆊᆯ⡕ཥぜ᱿ᨊ๗ ⴍ҉ᥖㆊ߱˶̬ᗼʁŊ⡕⸉଼Ȯଊ⺤༆྆Ⳗ⠗᳅⤯ᷤ
ᥖㆊُ〦ⶪ˴ະサⴍ҉טӷヅᄍヅ
ᣅʴᷨΎ༌֬᱿ٴ⫨Ŋᯍ⏨ሰဘ᱿ᆹαଔⳖ⠗ᔍᛤះՒ̳ a. ۓ⨢֦ᑨ᱿ʀ╾Ŋᥖㆊ⡶⇦߱ʀ╾⚠ b. ⦼͐ᮢ HiTi CS ᛤះҙဏͧ᱿ᛤះ͗ᛤះᥖㆊ a b
HiTi CS-200e ͐ᮢ⦦ᆙ
16
4.1 ⨸بُ⼂⦡⤻᱿⥗ᅜ
HiTi CS ⨢֦ᑨᆯરҚר˫᩸⎊̳ᏈŊʏʈ⩕͐ᮢ≛Ύྃ߱ଇ⸇᱿Ⴝ̳トᖣȯ
̟ᆯଃᅠɺˀࡣ᱿ᄑゃぜ⤻᱿ʴ⤟ŊⴒᆯሷՀ᱿ȯ
4.1.1 LCM Ӽㄇኈ
ࡣ⦦ᆙ
ᮟٴⶪЈ᱿ɺΤ LCM ӼㄇኈŊծؐɺΤ LCD ㆴḻȮ߈Τྈ⸹ُқΤ LED Β⚦ᥨ᱿ȯ
ሷ⨸بُ⼂⦡᱿⤻૽ሳഺⳆㄇኈㆴḻӛ͗ȯ ⲙߊʙㅪ
ㅪㄇӡဘ
ㅪㄇӡဘ
ⳖҘ/⥑હ/ᷨ⦓
ℂᥨ/ᔌ
ᥨ/⼂⦡
HiTi CS-200e ͐ᮢ⦦ᆙ
17
HiTi CS-200e ͐ᮢ⦦ᆙ
4.1.2 Ӽㄇᦹ᱿⨸ḻ⤻
⨸ḻ⤻
Cover Open
Flipper Cover Open
IC Chip Missing
Ribbon Missing
Ribbon Mismatch
Ribbon Type Error
Ribbon Out
Print Fail
Card Out
Card Jam
Card Mismatch
Cam Error
Flipper Error
Ribbon Error
⦦ᆙ
ᑨݽʀ╾ۓ
≒ㄇᑁʀ╾ۓ
⏨ᇘᦸ֦ቍમ⡶
⏨ቍમ⡶
⏨⎞ᇘᦸʃὪ ʃᄄိᔍ⏨
ᒑው⏨Ւ̳दᄜ
⏨͐ᮢરᯃ
༌֬Ւ̳दᄜ
֦ᦸ͐ᮢરᯃ
֦ᦸׂಙ⦲ᄮݽ⎞͐ᮢ᱿֦ᦸׂಙʃɺ⎐
֦ᦸ⎞֦ᦸʠ⿵᱿ؚえԻ(ヅ)ठ
༌֬⳧Ễʑ֦ᦸ֦ᅠᑨݽҙⵒŊᤀᘍરໞ༌֬דӛ֦
⤟ᗉᅞೣ
〦ʀᑨݽʀ╾
〦ʀ≒ㄇᑁʀ╾
တҘ⏨ᇘᦸ֦
⡶Ҙ⏨
ᒑው⏨⎞ᇘᦸᆯ؋ㆩࠣ
ᒑው⏨Ớㆩ
Ҫᓝ⸅ᅘમ⡶⏨
મ⡶ᅘ⏨
⦼ᒑው⏨ᆯ؋ᅜ⡣Ŋᅜ⡣⦼⸅ᅘߊ⏨
ᄍ⇦ᅘ֦ᦸ
ᷨ⦓֦ᦸׂಙ⦲ᄮᆯ؋ᔌᷨ
҅૽֦ᦸᄣҪ⸅ᅘᄮᄍҘⳖ֦ᐥʑ
ͩᤫㄇᦹʀ᱿֦Ễࡠ⠗֦Ւ̳
֦ᦸỚㆩʃὪ
ᑨݽҙⵒ˴ံࣺ
≒ㄇᑁᤀᘍՒ̳
ᇘᦸᱹᮝ⼂⦡
͐ᮢᐻ CS-80 ֦ᦸ
⊓↙ᯍ߸⺨ۄ
⊓↙ᯍ߸⺨ۄ
⸅ᅘમ⡶ሩᅘᇘᦸ
18
4.2 ᒑ⣶㊪ՒỄમ⡶᱿ᦹ
෨ר˫ ᆞ᱿ഺ෨᱿⤺ᾰᑨʑŊમ⡶᱿⨢֦ᑨҙ᱿଼ඖⴆ܈ʑʴ⤟મ⡶᱿㊪ՒỄೣᦹȯ
⩀෨らᆹʃહቅ᱿ഺໟΩ᱿ષᅞℐἿʑʁⰶሱᅘ᱿㊪ՒỄೣᦹȯ
෨ר˫ͩᤫʁӬ᱿ᔎ㊾ʴ⤟㊪ՒỄೣમ⡶᱿ᦹ
HiTi CS-200e ͐ᮢ⦦ᆙ
19
HiTi CS-200e ͐ᮢ⦦ᆙ
4.3 ᄑゃぜ
4.3.1 ⨢֦ᑨ᱿ᄑゃۊ㆛
ᗞሷᱹᮝ˶̬Ւ̳
༌֬ӛἇᱺ֦ᦸ
ⵒ˷⼂⦡༌֬
༌֬ӛᬙᯮ㔄
༌֬ӛᱺ⏨ᑲℬ
༌֬ӛᱺ⏨᳅ℬ
༌֬ӛᑁߧЭ
ᒑው⨢֦ᑨ᱿㊪ՒỄೣᆯ؋મ⡶ᔌᷨ
ᒑውヅُ USB ℬㆊ
ᒑው⏨ُ֦ᦸ
༌֬ᛵ⥶ߧ֦
ᒑው⏨
⦼⎏㊪ՒỄೣʑ༌֬۹॑⥑હʠ [డң]Ŋᒑው༌̤֬⇦ዮᔌ᱿ A ϊř⩀૽ A ϊߊു׆ೇ⥑હϊݏ⥶Ӭ֬
⦼ᒑው͐ᮢʠ֦ᦸᆯ؋Ὢ CR-80 ʠ⣳ጁ
ᒑው⨢֦ᑨ᱿⥑હ
ᒑውⳐℬُ⏨
ᷨ⦓ᛤះញⱐᆯ؋ʯᛍ᱿
ᒑው֦ᦸᆯ؋ᛤះ
ᒑውᥖㆊ
֦ᦸ᱿⠧ㄇר⋱טᖸዀ
⦼͐ᮢᛤះ֦Ⳗ⠗ᛤះ
ᥖㆊר⋱טぁࢩ
ᒑውᆯ؋ト⣬ሩဘゝࢴ⍑࿉ⱐ
ᒑው⏨ᆯ؋મ⡶ᔌᷨ
ᒑውᥖㆊᆯ؋טᖸዀטံ
ᥖㆊר⋱טံ
ᒑው⏨ᆯ؋મ⡶ᔌᷨ
ᒑውᛤះញⱐᥖㆊᆯ؋טᖸዀ
ᒑው֦ᦸᆯ؋ʢ⣳ጁ
20
4.3.2 ぜप֦
ᯍप֦ᱹᮝᆹŊ⦼Ἴ֯ϟᔋ༌֬Ŋͩᤫ LCM Ӽㄇᦹ᱿྆ḻŊ૽֦̦᱿֦ᦸぜȯ
༌ᑨݽʀ╾
Ẽぜ⏨
ͩᤫ LCM Ӽㄇᦹ᱿྆ḻⳖ⠗Ւ̳Ř⎊ՒȮ֚⎊Ւُ༆Ւ֦
Ⳗ⠗֚⎊Ւ༆Ւ֦ᆹŊ⦼խ૽෨᱿༆ᄍҘ֦֬ᑨҙ
෨ʬר˫ࡠ⠗ʁӬ⩀ʶㅮ͗ⴍ҉प֦Ř
ഺ㊪ՒỄೣُ֦ᦸׂಙ⦲ᄮጥʑŊ⥑હᔌ֦ᷨᦸׂಙ
ͩᤫ༆ҩ᱿⣳ҙૌʑŊ͐ᮢᔌᷨ᱿֦ᦸỚㆩ
ᒑ⣶͐ᮢ᱿֦ᦸᆯ؋౹ᄮ
㌂ᄣ֦ᦸŊॖኞ֦ᦸᱹᮝ㓸⫅⩽
༆Ւ֦ߧḻ⦦ᆙŘ
ㅯᆹ⸒ᅞᅩⱧ
HiTi CS-200e ͐ᮢ⦦ᆙ ɺ⬚ઈ
21
4.4 ༬⠛ᄄိ
ॖኞ෨ᱹᮝሷ˶̬ߔザ⥑હ⦲ᄮ⨢֦ᑨŊ⦼˝₳〇⩊༆ҩȯ
ᯍ෨ᤀᘍ⎊⠗⤟ᗉぜۊ㆛ᆹŊ෨ר˫らᆹ⦼ᖣᯍ߸⺨ۄℋ⩂ʑൔ᱿֠Հُᄄိȯ
ᯍᤀᘍ⤟ᗉぜۊ㆛ᱹᮝᆹŊॖኞ෨ʃᵧⳬॖ̬⊓↙ᯍ߸⺨ۄℋ⩂ʑൔᆹŊ
෨ר˫⥏ۊໟΩ᱿ષℐ ( www.hiti.com
) חവ⊓↙⫏⤻ʏʈໟΩဏۊȯ
ໟΩ૽ሳബ㋧⎟᱿らᆹᣅ෨ሺՖȯ
ᯍଁᖣ֠ՀᆹŊ⦼෨ൢ֠ՀဏͧʁӬ⸅⣬⫏⤻:
⨢֦ᑨ᱿ࠣ⚦ُӬ⚦ᷪ
ᯍᆹ͐ᮢ᱿⥑હُ⤺ᾰᑨ̳Ꮘ₇⃥᱿ᦹ
˝₳ᄝⲩۊ㆛᱿ᱹᮝ⳧
˝₳ᄝⲩ෨͐ᮢ˶̬᱿ᔎ㊾ᅞೣ͗ݏ⥶⤟ᗉۊ㆛
ॖኞ෨ト⣬˶̬ሩघ᱿֠ՀُൢŊ෨ר˫ഺໟΩ᱿ષℐ ( www.hiti.com
) ʀחവሱᅘ᱿⫏⤻Ŋ ծ㊪ՒỄೣȮㅊ㋤Ȯ͐ᮢ༆ҩُۊ⎞ᾊゝȯ
HiTi CS-200e ͐ᮢ⦦ᆙ
22
A:
HiTi CS-200e
300dpi
USB
64MB
50
LED
/ 1MB
(0.8mm/30mil)
1 (YMCKO) = 20
1 = 5
IBM
Pentium R / 133MHz
2000/XP/Vista
128MB 100MB
Windows 2000/XP/Vista/Windows 7 (32 & 64 bits)
Mac Linux
HiTi CardDésirée CS
MS Excel
Windows 2000/XP/Vista/7
HiTi CS-200e
23
⏨≩ቨỚㆩ ⴆ⫵ⶪЈ
Ύߗጻ˴
Ң˟
YMCKO ഔ⏨⏨Ř 400 ㄇ/࿉
YMCKO ֚ᦹഔ⏨⏨Ř 560 ㄇ/࿉
܈⏨⏨Ř 1000 ㄇ/࿉ (㓺⏨)
400 ㋧ૌ⸇Ⳗ֦ᐥ
≒ㄇᑁ
ᷬጻ֦⩊૯ᑁ (ISO 7811 HiCo/LoCo or JIS2)
IC ᇘᦸᇜ֦⩊૯ᑁ (ISO 7816-2 / PC / SC, EMV2000-1)
⤯ೣ֦⩊૯ᑁ (ISO 14443A & B, 15693)
ℐ⭰ᑁ
ͩ⺨ڰ֒ࡍ≟ʃŊ⦼ᙛᯍ߸⺨ۄ
֦ᦸỚㆩŘ PVC ֦
֦ᦸ⣳ጁŘ ISO CR-80 / ISO 7810 (53.98mm x 85.60mm)
֦ᦸׂಙŘ 0.3mm(10mil) ~ 1.0mm(40mil) ; キㄇ༌֬Ř 0.5mm
˫ʀ
Ⳗ ֦ ᐥŘ 100 ֦ᦸ (0.8mm/30mil) ӛ ֦ ᐥŘ 50 ֦ᦸ (0.8mm/30mil)
㋤ỬଙŘ 197.8mm(W) x 354mm(L) x 204mm(H)
⸅ ⸇Ř 4.9
ҝᅏ
ⳐᅞೣŘ USB םℐ⭰ם(ⴆ⫵ⶪЈ)Ŋ(ʨठℐ⭰ 10/100 Mbps )
ヅ Ř AC input: 100~240V ~ 2.5A, 50~60Hz / DC output: 24V=4.16A
Ⴝ̳᭔ࣀŘ 15~32 ಙ / 20%~85% ଃಙ
Ѳએ᭔ࣀŘ -20~60 ಙ / 20%~90% ଃಙ
డ̳᭔ࣀŘⳇㆺ᱿ᄍἇ⿵
HiTi CS-200e ͐ᮢ⦦ᆙ
24
HiTi CS-200e
使用說明
Appendix B FCC Compliance Statement
1. Notice : The changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
2.IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements,no change to the
antenna or the device is permitted. Any change to the antenna or the device could
result in the device exceeding the RF exposure requirements and void user’s
authority to operate the device.
3. FCC INFORMATION:
The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph:
The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation.If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
The user should not modify or change this equipment without written approval
Form HiTi Digital Inc. Modification could void authority to use this equipment.
25
HiTi Digital, Inc.
2011 HiTi Digital, Inc. All Rights Reserved.
Specifications are subject to change without notice.
P/N:39.C0800.021
Download
Public link updated
The public link to your chat has been updated.
Document public link
Advertisement
Key features
- 300dpi print head
- USB connection
- Ethernet TCP/IP connection
- HiTi color technology enhanced
- Edge to edge printing
- A.I smart ribbon saving for monochrome printing
