HP B94SHNGD1605 Pro Portable Tablet Dock User Manual

Add to my manuals
15 Pages

advertisement

HP B94SHNGD1605 Pro Portable Tablet Dock User Manual | Manualzz
HP ScanJet
Wireless Adapter
100
EN ..1
FR..8
IT..15
DE..22
ES..29
ZHTW..36
KO..43
ZHCN..50
*L2761-90001*
*L2761-90001*
/
ES
Lea esto primero
www.hp.com/support/sjadapter100
PT..57
RU..64
AR..71
TR..78
ID..85
TH..92
1
Make sure that the power is off.
2
Locate the adapter in the wireless port.
3
4
Insert the accessory into the USB port as shown above.
5
Make sure that the accessory is fully seated in the port.
6
Turn the power on.
NOTE: Make sure that the product is connected to a computer using a
USB cable.
7
If the HP software is not installed, install it now.
TIP: Follow the instructions on the computer display.
If the HP software is already installed, skip this step.
8
At the computer, do the following:
a) If you are on a Win OS,
b) Click Start, and then click HP.
c) Click HP ScanJet #####, and then click
Device Setup & Software.
d) Follow the instructions to setup the WiFi function.
Or
a) If you are on a Mac OS,
b) Launch HP Easy Start to go to Connect.
d) Follow the instructions to setup the WiFi function.
9
From a mobile device go to www.hp.com/support, and then download
the HP JetAdvantage Capture application (app).
10
Open the app on the mobile device to wirelessly scan from your
product.
11
If the wireless adapter needs to be removed, use the tool that came in
the box to remove it.
HP limited warranty statement
HP ScanJet Wireless Adapter 100
Regulatory Model Identification Number
For regulatory identification purposes, this product has been assigned a Regulatory Model Number (RMN).
The RMN for your product is SHNGD-1605. The RMN should not be confused with the marketing name (HP
ScanJet Wireless Adapter 100) or the HP Product Number (L2761A).
Notice for the U.S.A.
Federal
Communication
Commission
Interference
Statement
This
device
complies with
Part 15 of
the Federal
Communication Commission rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful interference, and 2) this device must
This device
with Part
15 of the
FCC Rules.
Operationthat
is subject
to the following
twooperation.
conditions: (1) This device
accept
any complies
interference
received,
including
interference
may cause
undesired
may not cause harmful interference, and (2) this device must accept any interference received, including interference
This
equipment
has
been
tested
and
found
to
comply
with
the
limits
for
a
Class
B
digital
device, pursuant
that may cause undesired operation.
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference
a commercial
This equipment
generates,
anddevice,
can radiate
radio
frequency
This equipmentinhas
been tested environment.
and found to comply
with the limits
for a Classuses
B digital
pursuant
to Part
15 of
energy
if not
installed
anddesigned
used intoaccordance
with theprotection
instructions,
may
causeinterference
harmful interference
to
the FCCand,
Rules.
These
limits are
provide reasonable
against
harmful
in a residential
radio
communications.
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
Operation
of this
equipment
in aoccur
residential
area isinstallation.
likely to cause
interference,
whichinterference
case the to
guarantee that
interference
will not
in a particular
If thisharmful
equipment
does cause in
harmful
user
be required
to correct
ownthe
expense.
If this
equipment
doesis cause
harmful
radio will
or television
reception,
whichthe
caninterference
be determinedatbythis
turning
equipment
off and
on, the user
encouraged
to try
interference
to
radio
or
television
reception,
which
can
be
determined
by
turning
the
equipment
off
and on,
to correct the interference by one of the following measures:
the user is encouraged to try to correct the interference by one or more of the following measures:
•- Reorient
or relocate
the receiving
antenna.
Reorient
or relocate
the receiving
antenna.
•- Increase
separation
between
the equipment
and the receiver.
Increase
thethe
separation
between
the equipment
and receiver.
•- Connect
equipment
an on
outlet
on adifferent
circuit from
different
whichisthe
receiver is conConnect
the the
equipment
into aninto
outlet
a circuit
that tofrom
whichthat
the to
receiver
connected.
nected.
- Consult the dealer or an experienced radio/TV technician for help.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void
FCC Caution: The FCC requires the user to be notified that any changes or modifications made to this device
the user's authority to operate this equipment.
that are not expressly approved by
HP Inc. may void the user’s authority to operate the equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
Radiation
Exposure
(1)
this device
mayStatement:
not cause harmful interference, and (2) this device must accept any interference
The product comply with
the FCC portable
RF cause
exposure
limit set forth
for an uncontrolled environment and are safe for
received,including
interference
that may
undesired
operation.
intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be
kept as far–as
possible to
from
the user
body or set
the device
to lowerthe
output
power output
if such function
Warning
Exposure
Radio
Frequency
Radiation
Although
radiated
power is
ofavailable.
this device
isbelow the FCC radio exposure limits, the device should be used in such a manner that the potential for
The USB dongle with
transmitter
is approved
for use
in typical
laptop computers.
To comply
withthe
FCC
RF exposure
humancontact
the antennas
during
normal
operation
is minimized.
To avoid
possibility
of exceedrequirements,
it should
not be used
in other
devices
or certain
laptop and
tablet
computer
configurations
where
ing
theFCC radio
frequency
exposure
limits,
human
proximity
to the
antenna
should
not be less
thanthe20USB
connectors
on
the
host
computer
are
unable
to
provide
or
ensure
the
necessary
operating
configurations
intended
for the
cm(8 inches) during normal operation.
device and its users or bystanders to satisfy RF exposure compliance requirements.
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all
WiFi product marketed in US must fixed to US operation channels only.
Notice for Canada
This device
with the limits for a Class B digital device and conforms to Industry Canada standard
CAN
ICES-3 complies
(B)
ICES-003. Products that contain a radio transmitter comply with Industry Canada standard RSS210 and
are labeled
with anwith
IC ID.
This
device complies
RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
Operation
is
subject
to
the
following
two conditions: (1) this device may not cause interference, and (2)
interference that may cause undesired
operation.
this device must accept any interference, including interference that may cause undesired operation of
the device.
Radiation
Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe
This
equipment
complies
with Canada
exposure
limits
set forth
for ancan
uncontrolled
for intended operation
as described
in this radiation
manual. The
further RF
exposure
reduction
be achievedenvironment.
if the product
Thisbe
equipment
be installed
and body
operated
a minimum
of 20if cm
radiator
can
kept as far should
as possible
from the user
or set with
the device
to lowerdistance
output power
suchbetween
function isthe
available.
and personnel.
Note pour le Canada
NMB-3(B)
Cet
appareil numérique de la classeBest conforme à la norme ICES-003 d’Industry Canada. La radio sans fil
Ce ce
dispositif
est conforme
à la norme
CNR-247 d'Industrie
Canada
applicable
aux et
appareils
radio exempts
de numéro
licence.
de
dispositif
est conforme
à la certification
RSS 210
d’Industry
Canada
est étiquetée
avec un
Son fonctionnement
d’approbation
IC. est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
Le
fonctionnement
est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer
fonctionnement
indésirable.
d’interférences
et (2) doit
accepter toute réception d’interférence, y compris les interférences susceptibles
Déclaration d'exposition
aux radiations:
de
générer
fonctionnement
l’appareil.
Le produit
estunconforme
aux limitesindésirable
d'exposition de
pour
les appareils portables RF pour les Etats-Unis et le Canada établies
pour un environnement non contrôlé.
Cet
équipement
respecte
les
limites
d’exposition
auxdans
radiofréquences
un être
Le produit est sûr pour un fonctionnement tel que décrit
ce manuel. Lacanadiennes
réduction auxapplicables
expositionsdans
RF peut
environnement
non contrôlé.
équipement
doit
être
installé
fonctionner
à uneoudistance
minimale
augmentée si l'appareil
peut êtreCet
conservé
aussi loin
que
possible
du et
corps
de l'utilisateur
que le dispositif
estde
réglé
20
entre le radiateur
votre
corps.
sur cm
la puissance
de sortie laetplus
faible
si une telle fonction est disponible.
© Copyright 2015 HP Development Company, L.P.
Reproduction, adaptation or translation without prior written permis­sion is prohibited, except as allowed
under the copyright laws.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the ex­press warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional war­ranty. HP shall not be liable for
technical or editorial errors
or omissions contained herein.
Reproduction, adaptation or translation without prior written permis­sion is prohibited, except as allowed
under the copyright laws.
La reproduction, l’adaptation ou la traduction de ce document sans l’autorisation écrite préalable de HP
est interdite, sauf dans des conditions conformes aux lois relatives au copyright.
Les informations contenues dans ce document peuvent être modifiées sans préavis.
Les seules garanties pour les produits et services HP sont décrites dans les déclarations de garantie
expresse qui accompagnent ces produits et services. Les informations contenues dans ce document ne
constituent en aucun cas une garantie supplémentaire. HP n’est pas responsable des erreurs d’ordre
technique ou éditorial ou des omissions contenues dans ce document.
3URGXFWVEHDULQJWKH&(PDUNLQJFRPSO\ZLWKWKHIROORZLQJ(8'LUHFWLYHV
• /RZ9ROWDJH'LUHFWLYH(&
• (0&'LUHFWLYH(&
• 5R+6'LUHFWLYH(8
• 5 77('LUHFWLYH(&
&(FRPSOLDQFHRIWKLVSURGXFWLVYDOLGLISRZHUHGZLWKWKHFRUUHFW&(PDUNHG$&DGDSWHUSURYLGHGE\+3
&RPSOLDQFHZLWKWKHVHGLUHFWLYHVLPSOLHVFRQIRUPLW\WRDSSOLFDEOHKDUPRQL]HG(XURSHDQVWDQGDUGV (XURSHDQ
1RUPV WKDWDUHOLVWHGLQWKH(8'HFODUDWLRQRI&RQIRUPLW\LVVXHGE\+3IRUWKLVSURGXFWRUSURGXFWIDPLO\DQG
DYDLODEOH LQ(QJOLVKRQO\ HLWKHUZLWKLQWKHSURGXFWGRFXPHQWDWLRQRUDWWKHIROORZLQJZHEVLWH
ZZZKSHXFHUWLƬFDWHV W\SHWKHSURGXFWQXPEHULQWKHVHDUFKƬHOG 7KHFRPSOLDQFHLVLQGLFDWHGE\RQHRIWKHIROORZLQJFRQIRUPLW\PDUNLQJVSODFHGRQWKHSURGXFW
3OHDVHUHIHUWRWKHUHJXODWRU\ODEHOSURYLGHGRQWKHSURGXFW
7KHWHOHFRPPXQLFDWLRQVIXQFWLRQDOLW\RIWKLVSURGXFWPD\EHXVHGLQWKHIROORZLQJ(8DQG()7$FRXQWULHV
$XVWULD%HOJLXP%XOJDULD&\SUXV&]HFK5HSXEOLF'HQPDUN(VWRQLD)LQODQG)UDQFH*HUPDQ\*UHHFH
+XQJDU\,FHODQG,UHODQG,WDO\/DWYLD/LHFKWHQVWHLQ/LWKXDQLD/X[HPERXUJ0DOWD1HWKHUODQGV1RUZD\
3RODQG3RUWXJDO5RPDQLD6ORYDN5HSXEOLF6ORYHQLD6SDLQ6ZHGHQ6ZLW]HUODQGDQG8QLWHG.LQJGRP
3URGXFWVZLWKZLUHOHVV/$1GHYLFHV
6RPHFRXQWULHVPD\KDYHVSHFLƬFREOLJDWLRQVRUVSHFLDOUHTXLUHPHQWVDERXWWKHRSHUDWLRQRI:LUHOHVV/$1
QHWZRUNVVXFKDVLQGRRUXVHRQO\RUUHVWULFWLRQVRIWKHFKDQQHOVDYDLODEOH3OHDVHPDNHVXUHWKDWWKHFRXQWU\
VHWWLQJVRIWKHZLUHOHVVQHWZRUNDUHFRUUHFW
)UDQFH
)RU*+]:LUHOHVV/$1RSHUDWLRQRIWKLVSURGXFWFHUWDLQUHVWULFWLRQVDSSO\7KLVSURGXFWPD\EHXVHG
LQGRRUVIRUWKHHQWLUH0+]WR0+]IUHTXHQF\EDQG FKDQQHOVWR )RURXWGRRUXVHRQO\WKH
0+]WR0+]IUHTXHQF\EDQG FKDQQHOVWR PD\EHXVHG)RUWKHODWHVWUHTXLUHPHQWVVHH
KWWSZZZDUFHSIU
7KHSRLQWRIFRQWDFWIRUUHJXODWRU\PDWWHUVLV
+3*PE+'HSW06+475(+HUUHQEHUJHU6WUDVVH%RHEOLQJHQ*(50$1<
Declaration of Conformity
Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050Supplier’s Name:
HP Inc.
Supplier’s Address:
Building 6, No. 690 BiBo Road, ZhangJiang, Shanghai, China
DoC#: SHNGD-1605-R1
declares, that the product
Product Name and Model:
ScanJet Wireless Adapter 100
Regulatory Model Number:1)
SHNGD-1605
Product Options:
conforms to the following Product Specifications:
SAFETY:
IEC 60950-1:2005 +A1:2009
EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011
EN 62479:2010
EMC:
FCC CFR 47 Part 15 Class B
ICES-003:2012 Issue 5 Class B
Radio:
EN 301 489-1 V1.9.2 / EN 301 489-17:V2.2.1
EN 300 328: V1.9.2
FCC Title 47 CFR, Part 15 Subpart C (Section
15.247) / IC: RSS-210
IEC 62311:2007 / EN62311:2008
RoHS:
EN 50581:2012
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the Ecodesign Directive
2009/125/EC, the RoHs Directive 2011/65/EU and carries the
accordingly.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 Conditions: (1) this device
may not cause harmful interference, and 92) this device must accept any interference received, including interference
that may cause undesired operation.
Additional Information:
1) This product is assigned a Regulatory Model Number which stays with the regulatory asspects of the design. The
Regulatory Model Number is the main product identifier in the regulatory documentation and test reports, this number
should not be confused with the marketing name or the product numbers.
Shanghai, China
04 15 May 2015
Local contact for regulatory topics only:
European Contact:
HP GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
USA Contact:
HP Inc., 1501 Page Mill Road, Palo Alto 94304, U.S.A. 650-857-1501

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement