LG Electronics USA BEJLSM2150HU LCDMonitor User Manual

Add to My manuals
38 Pages

advertisement

LG Electronics USA BEJLSM2150HU LCDMonitor User Manual | Manualzz

User’s Guide

LSM1850

LSM2150

M ake sure to read the Important Precautions before using the product.

Keep the User's Guide(CD) in an accessible place for future reference.

S ee the label attached on the product and give the information to your dealer when you ask for service.

Important Precautions

This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

Do not Open the Display:

There are no user serviceable components inside.

There are Dangerous High Voltages inside, even when the power is OFF.

Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured.

Use only a stand recommended by the manufacturer.

Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.

It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house.

Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this display.

When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.

In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock.

A1

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.

Place the display in a built-in enclosure unless proper ventilation is provided.

Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.

However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product.

Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects.

Otherwise, it may cause damage to the screen.

Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair.

Avoid high temperatures and humidity.

A2

Important Precautions

NOTE

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY

TO OPERATE THE EQUIPMENT.

NOTE

This epuipment has been tested and found to comply with the limits for a class

B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and the receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

A3

Important Precautions

On Cleaning

Unplug the display before cleaning the face of the display screen.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock.

When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)

Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining.

On Repacking

Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.

On Disposal

(Only, Hg lamp used LCD Monitor)

The fluorescent lamp used in this product contains a small amount of mercury.

Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of your local authority.

A3

Accessories

!!! Thank for selecting LGE products !!!

Please make sure the following items are included with your monitor. If any items are missing, contact your dealer.

User's Guide/Cards Power Cord

15-pin D-Sub Signal Cable

(To set it up, this signal cable may be attached to this product before shipping out.)

Remote Control / Batteries Audio Cable (PC) DVI-D Cable (PC)

NOTE

This accessories may look different from those shown here.

User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product.

A4

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

Connecting the stand

1 . Place the monitor with its front facing downward on a cushion or soft cloth.

2

.

Assemble the Stand Base into the Stand Body.

Be sure don't pull out the Stop Pin and make the Stand Base direction as shown.

Stand Base

Side Stop Pin

Stand Body

FRONT

3 .

Make the monitor stand , then pull out the Stop Pin.

Warning: The tape and locking pin may only be removed from those monitors equipped with a standing base when the base is pulled up. Otherwise, you may be injured by the protruding sections of the stand.

pull out the stop pin

Stop Pin

Stop Pin

Important

This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

A5

Before Connecting to the PC

Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off.

Positioning your display

1.

Adjust the position of the panel in various ways for maximum comfort.

Tilt Range: -5˚~ 15˚ Swivel: 356˚

-

5

° 1

5

°

Warning:

When adjusting the angle

or height

of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s).

Height Range: maximum 4.33 inch (110.0 mm)

110.0 mm

First, remove the stop pin.

Ergonomic

It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.

A6

To arrange cables using cable management

1.

Tie cables together with a cable management as shown in the illustration.

Cable Holder

A7

Name and Function of the Parts

Name of the Remote Control Buttons

ID POWER RGB

HDMI DVI VIDEO1 VIDEO2

POWER

Turn the monitor on or off.

RGB,HDMI,DVI,VIDEO1,VIDEO2

MENU

MUTE

OK

NOTE : In case of weak stereo sound signals, with stereo or Nicam stereo transmission, select mono reception.

RETURN

*

Number buttons

Used for input ID.

MENU

Use this button to enter the On Screen Display menu.

MUTE

Switches the sound on or off.

RETURN

Return one step.

Buttons

Able to change channel.

OK Button

Use when functional adjustment is completed.

Double press the OK button, then Auto Config.

(Only RGB input)

*

There is not a function which is supported.

Inserting batteries into remote control.

1. Take out the battery cap.

2. Insert the batteries with correct polarity (+/-).

3. Close the battery cap.

• Dispose of used batteries in the recycle bin to prevent environmental pollution.

AAA Type

A8

Name and Function of the Parts

Rear View

AC IN

AV 1

AC IN

AV 1

AC IN

HDMI

DVI-D

RGB

AUDIO IN

(RGB/DVI)

L

R

L

R VIDEO1

OUT IN

VIDEO2

Power Connector : Connect the power cord.

HDMI Digital Signal Connector

DVI Digital Signal Connector

AV Sound Jack(AUDIO Input)

AV Input

/ Output t erminal

RGB

Analog Signal Connector

RGB, DVI Sound Jack : Connect to the jack in the PC sound card.

A9

AC IN

AV 1

Connecting to External Devices

Connecting to your PC

1.

First of all, see if the computer, product and the peripherals are turned off.

Then, connect the signal input cable.

Rear side of the product.

AC IN

HDMI

DVI-D

RGB

AUDIO IN

(RGB/DVI)

L

R VIDEO1

L

R IO2

OUT

VIDEO2

IN

AC IN

A

AV 1

Connecting with the D-Sub signal input cable.

RGB

Rear side of the product.

Macintosh Adapter (Not included)

Use the standard Macintosh adapter since an incompatible adapter is available in the market.

(Different signaling system)

B Connecting with the DVI signal input cable.

DVI-D

Rear side of the product.

2.

Connect the audio cable.

Audio cable

AUDIO IN

(RGB/DVI)

Rear side of the product.

• Make sure to check the sound card connection terminal in the PC before connecting to the product.

If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper or the PC application. (For more details, refer to the sound card user’s guide.)

- Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier.

- * Line Out : The terminal connected to the speaker equipped with an amplifier.

If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated with an amplifier.

Connecting to External Devices

3.

Connect the power cord.

Rear side of the product.

AC IN

HDMI

DVI-D

RGB

AUDIO IN

(RGB/DVI)

L

R

L

R VIDEO1

OUT IN

VIDEO2

4.

1 AV 1 Turn on power by pressing the power button on the product.

Power

Power button

2

5.

Select an input signal.

Press the input source button on the remote control to select the input signal.

Or, press the INPUT button at the top side of the product.

A • Select RGB

Input

V IDEO 1

V IDEO 2

RGB PC

DVI

HDMI

OK

B

• Select DVI

Input

VIDEO 1

VIDEO 2

RGB PC

DVI

HDMI

OK

Each time you press the Input button it will change to V

IDEO1

V

IDEO2

RGB

PC

DV

I

HDMI

.

If nothing is inputted for several seconds the screen will automatically move to the selected menu.

Note

• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.

A11

Connecting to External Devices

Connecting to VCR/DVD

1.

Connect the video/audio cable as shown in the figure below and then connect the power cord .

• Connect the input terminal with a proper colour match.

VCR/DVD Rear side of the Product

AUDIO OUT RCA Cable

(Not included)

L

IN

VIDEO

R

VIDEO OUT

2.

Select an input signal.

Press the input source button on the r e mote control to select the input signal.

Or, press the IN PUT button at the top side of the p roduct.

A When connecting with VIDEO1 .

• Select V IDEO1

B When connecting with VIDEO2 .

• Select V IDEO 2

Input

VIDEO 1

VIDEO 2

RGB PC

DVI

HDMI

OK

Input

V IDEO 1

VIDEO 2

RGB PC

DVI

HDMI

OK

Each time you press the Input button it will change to V

IDEO1

V

IDEO2

RGB

PC

DV

I

HDMI

.

If nothing is inputted for several seconds the screen will automatically move to the selected menu.

A12

Connecting to External Devices

When watching HDMI from the DVD/Set-top Box

1.

Connect the HDMI cable as shown in the below figure and then connect the power cord.

[Rear side of the Product]

[Rear side of the Product]

AUDIO IN

(RGB/DVI)

HDMI

HDMI

RCA Stereo cable

(not included)

HDMI to DVI cable

(not included)

HDMI cable

(not included)

L

AUDIO

R

DVI OUTPUT

HDMI OUTPUT

[Set-top Box/DVD]

2.

Select an input signal.

[Set-top Box/DVD]

Press the input source button on the remote control to select the input signal.

Or, press the INPUT button at the top side of the product.

• Select HDMI

Input

V IDEO 1

V IDEO 2

RGB PC

DVI

HDMI

OK

Each time you press the Input button it will change to V

IDEO1

V

IDEO2

RGB

PC

DV

I

HDMI

.

If nothing is inputted for several seconds the screen will automatically move to the selected menu.

Note

• HDMI Input does not support PC mode.If it is connected PC,the screen may not be displayed properly.

A13

Adjusting the Screen

Screen Adjustment options

Power

Power Button

• Use this button to turn the product on and off.

OSD Select/Adjust Button

• Use this button to select an icon or adjust the setting in the OSD screen.

• Adjust the up and down.

Volume

• Adjust the volume.

30

OK Button

MENU Button

• OK button is usually used in choosing the MENU.

When there is no MENU on the screen pushing the OK button will give the information about the current input source.

• Use this button to show/hide the OSD (On Screen Display) menu screen.

A14

Adjusting the Screen

Screen Adjustment options

INPUT Button

V IDEO1

CVBS

V IDEO2

CVB

S

RG

B PC

DVI

HDMI

D-Sub analog signal

DVI Digital signal

HDMI Digital signal

Input

VIDEO1

VIDEO2

RGB PC

DVI

HDMI

OK

Each time you press the Input button it will change to V

IDEO1

V

IDEO2

RGB

PC

DV

I

HDMI

.

If nothing is inputted for several seconds the screen will automatically move to the selected menu.

A15

Adjusting the Screen

OSD Menu

Icon Function Description

Adjusts screen brightness, contrast and color that you prefer.

Picture

Adjusts the audio options.

Audio

Adjusts the timer options.

Time

Adjusts the screen status according to the circumstances.

Option

Note OSD(On Screen Display)

The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation.

A16

Adjusting the Screen

How to adjust the OSD (On Screen Display) screen

OK OK OK OK

RETURN

OK OK

Pops up the menu screen

Move where you want to adjust

Select a menu icon

Move where you want to adjust

Select a menu icon

Adjust the status

Save adjustment

Return to last step

.

• Use the remote control to adjust the OSD screen.

1

Press the MENU Button, then the main menu of the OSD appears.

2

To access a control, use the Buttons.

3

When the icon you want becomes highlighted, press the

OK

Button.

4

Use the Buttons to adjust the item to the desired level.

5 Accept the changes by pressing the

OK

Button.

6

Exit the OSD by pressing the

RETURN

Button.

How to adjust the screen automatically

Press the

OK

button (O

K

button on a remote Control)

twice in the PC analog signal. Then optimal screen settings will be selected that fit into the current mode. If adjustment is not satisfactory, you can adjust the screen manually.

[For PC Analog signal]

Auto in progress

For opimal display change resolution to 1

360

X

768

LSM1850

Auto in progress

For opimal display change resolution to 1920 X 1080

LSM2150

A17

Adjusting the Screen

On-Screen Menu Language Selection

Installation guide menu appears on product screen when it is turned on for the first time.

Installation Guide

Language

English

Español

Suo mi

Русский

汉语

Deut sch

Ita l i a n o

Por tuguês

Ελ ληνικά

Ja pan

Fran ς a is

Sve nska

Polsk i

УК РАЇ НСЬК А

Ko rea

OK

Press the button and then, OK button to select your desired language.

* If you want to change Language selection

1. Press the MENU button and then button to select the O p tion menu.

2. Press the button and then button to select Language.

The menus can be shown on the screen in the selected language.

3. Press the button and then button to select your desired language.

4. Press the OK button.

Note

• If you don't finish set up Installation Guide by pressing MENU button or time out of OSD

(On Screen Display) display, it will continuously appear until completing set up whenever the set is turned on.

A18

Adjusting the Screen

Adjusting Screen Color

Picture

Mode

P icture

Picture Mode

Color Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

 v Vivid

Standard

Cinema

Sport

Game

User1

User2

▲▼

 OK RETURN

Toggles between screen presets.

• Vivid : Select this option to display with a sharp image.

• Standard : The most general and natural screen display status.

• Cinema : Select this option to lower brightness by one level.

• Sport : Select this option to display with a soft image.

• Game : To enjoy dynamic image when playing a game.

• User1,2 : Select this option to use the user-defined settings.

User2

Backlight

Contrast

Brightness

Color

Sharpness

Tint

20

90

50

50

50

50

OK RETURN

Backlight : To control the brightness of the screen,adjust the brightness of LCD panel.

Contrast : Adjust the difference between the light and dark levels in the picture.

Brightness : To adjust the brightness of the screen.

Color : To adjust the color to desired level.

Sharpness : To adjust the clearness of the screen.

Tint :To adjust the tint to desired level.

Note If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema,

Sport or Game the subsequent menus will be automatically set.

A19

Adjusting the Screen

Adjusting Screen Color

Color

Temperature P icture

Picture Mode

Color Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

 v Cool

Medium

Warm

User

▲▼ OK RETURN

Color Settings

• Cool : Slightly purplish white.

• Medium : Slightly bluish white.

• Warm : Slightly reddish white.

• User : Select this option to use the user-defined settings.

P icture

Picture Mode

Color Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

 v 9300K

6500K sRGB

User

▲▼ OK RETURN

• 9300K

Slightly purplish white.

• 6500K

Slightly bluish white.

• sRGB

Slightly lower brightness.

User

Red

Green

Blue

0

0

0

[VIDEO]

[RGB PC]

OK RETURN

Red / Green / Blue

Set your own color levels.

A20

Adjusting the Screen

Adjusting Screen Color

XD

XD is LG Electronics' unique picture improving technology that displays a real HD source through an advanced digital signal processing algorithm.

This function is not available in RGB-PC or D

VI modes.

This menu is activated after selecting User1 or User2 of P icture Mode

.

P icture

Picture Mode

Color Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen v Auto

Manual

OK RETURN

• Auto : XD is automatically changed to Auto.

• Manual : When selecting the Manual, you can adjust the XD Contrast , XD Colour , XD NR

.

• XD Contrast : Optimizing the contrast automatically according to the brightness of the reflection.

• XD Colour : Adjusting the colors of the reflection automatically to reproduce as closely as possible to natural colors.

• XD NR : Removing the noise up to the point where it does not damage the original picture.

A21

Adjusting the Screen

Adjusting Screen Color

Advanced

This function is available

only

in

VIDEO1,VIDEO2 modes.

P icture

Picture Mode

Color Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

To set

OK RETURN

• Gamma : Set your own gamma level

:

Low,Medium,High.

On the monitor, high gamma values display whitish images and low gamma values display blackish

images.

C i nema

: When you watch a movie, this function adjusts the set to the best picture appearance.

• Black Level : adjusts the contrast and the brightness of the screen using the black level of the screen.

• Low : The reflection of the screen gets brighter.

• High : The reflection of the screen gets darker.

A22

Adjusting the Screen

Adjusting Screen Color

Aspect Ratio To select the image size of the screen.

P icture

Picture Mode

Color Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen v 16 : 9

4 : 3

OK RETURN

16:9

Original

4:3

14:9

Zoom1, 2

Widescreen mode.

The aspect ratio is not adjusted from the original. It is set by the program being watched.

This picture format is 4:3 aspect ratio.

14:9 programs are viewed normally in 14:9 with black bars added to the top and bottom. 4:3 programs are magnified on the top/bottom and left/right sides.

4:3 programes are magnified until they fill the 16:9 screen. The top and bottom will be cut off.

ARC

16:9

Original

4:3

14:9

Zoom1

Zoom2

MODE

A23

Adjusting the Screen

Adjusting Screen Color

Picture Reset Return Picture Mode , Color Temperature , Advanced to the default factory settings.

P icture

Picture Mode

Color Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

▶ To Set

Screen

OK RETURN

Adjust the screen video.

(RGB PC input only)

P icture

Picture Mode

Color Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

Screen

Auto configure

Manual configure

Resolution

 To Set

OK RETURN

OK RETURN

Auto Config. : This button is for the automatic adjustment of the screen position, clock and phase. This function is available for analog signals only.

Manual Config. : If the picture isn't clear after auto adjustment and characters are still trembling, adjust the picture phase manually.

* Phase, Clock function are available

only

in

RGB

.

Phase : To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.

Clock : To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change.

H-Position : Moving the screen position horizontally.

V-Position : Moving the screen position vertically.

Resolution

: To

view the best resolution of RGB-PC mode. Select the same resolution on

OSD with PC's. It's working at RGB-PC mode when vertical frequency is 60Hz.

Reset: Return Manual config. to the default factory settings.

A24

Adjusting the Screen

Adjusting the audio function

Sound

Mode

The best sound tone quality will be selected automatically depending on the video type that you're currently watching.

Audio

Sound Mode

Speaker

▶ v Clear Voice

Standard

Music

Cinema

Sport

Game

User

OK RETURN

• Clear Voice : By differentiating the human sound range from others,it helps users listen to human voices better.

• Standard : The most commanding and natural audio.

• Music : Select this option to enjoy the original sound when listening to the music.

• Cinema : Select this option to enjoy sublime sound.

• Sport : Select this option to watch sports broadcasting.

• Game : To enjoy dynamic sound when playing a game.

• User : Select this option to use the user-defined audio settings.

User

0.1 0.5 1.5 5.0 10 KHz

OK RETURN

Speaker You can adjust internal speaker status.

If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.

Note

When connected to your computer and the 'Sound Mode' setting in the audio menu is

Clear Voice, Standard , Music , Cinema or Sport , the available menu

i s Speaker .

A25

Adjusting the Screen

Adjusting the time function

T ime

Clock

Off Time

On Time

Sleep Timer

Auto Sleep

▶ ㅡㅡ : ㅡㅡ

OK RETURN

Clock This function is used to set up of current time.

You must set the time correctly before using On/Off time function.

1) Press the MENU button and then use button to select the TIME menu.

2) Press the button and then use button to select the Clock menu.

3) Press button and then use button to set the hour(00~23).

4) Press button and then use button to set the minutes(00~59).

The default value is -- : --.

5) Press the OK/MENU button to save.

Off/On time The Off time automatically switches the set to off mode at the pre-set time.

1) Press the MENU button and then use

2) Press the button and then use

3) Press the button and then use button to select the TIME menu. button to select Off time or On time .

button to set the hour(00~23).

4) Press the

5) Press the button and then use button and then use button to set the minutes(00~59). button to select On or Off . button to adjust volume level 6) Only On time function; Press the button and then and programme number.

7) Press the OK/MENU button to save.

Sleep Time r

The power is automatically turned off when the time set by a user is passed.

1) Press the MENU button and then use

2) Press the button and then use

180,240

)

or off

. button to select the Sleep Time r menu. button to se lec t the minutes

(

1

0

,20,30,60,90,120,

3) Press the OK/MENU button to save .

Auto sleep If Auto sleep is active and there is no input signal, the set switches to off mode automatically after 10 minutes. ( It is not working in PC)

1) Press the MENU button and then use button to select the Auto sleep menu.

2) Press the button and then use button to select On or Off .

3) Press the OK/MENU button to save .

Note

• In the event of power interruption (disconnection or power failure), the Clock must be reset.

• Two hours after the set is switched on by the On time function it will automatically switch back to off mode unless a button has been pressed.

• Once the On or Off time is set, these functions operate daily at the preset time.

• Off time function overrides On time function if they are set to the same time.

• The set must be in off mode for the On time to work.

• On time will move on to auto off if no activity is received in 2hours after setting the On time .

A26

Adjusting the Screen

Selecting the options

Option

Language

Key lock

ISM Method

Set ID

DDC-CI

Power Indicator

Factory Reset

To Set

OK RETURN

Language

Key Lock

To choose the language in which the control names are displayed.

Use the buttons to select On or Off . The monitor can be set up so that it can only be used with the remote control. This feature can prevent unauthorized viewing.

In order to lock the OSD screen adjustment, set the Key Lock tab to the ' On ' position.

In order to unlock it, do the following :

• Push the MENU button on the remote control and set Key Lock to the ' Off ' position.

ISM Method A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods could result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for a long period of time.

Normal : Leave on normal if you don't foresee image burn in being a problem.

White wash : White wash fills the screen with solid white. This helps removes permanent images burned into the screen. A permanent image may be impossible to clear entirely with white wash.

Orbiter : May help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.

Inversion : This function inverts the panel color of the screen. The panel color is automatically inverted every 30 minutes.

Dot Wash : This function moves the black dots of the screen. The black dots is automatically moved every 5 second.

Set ID You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1~99) using the button and exit. Use the assigned Set ID to individually control each product using the Product

Control Program.

DDC-CI DDC/CI(Display Data Channel Command Interface) is communication protocol for communications between PC and monitor.

DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the monitor OSD.

Monitor can be adjusted with PC by connecting communication between PC and monitor when DDC/CI is ON, and monitor cannot be adjusted with PC because communication between PC and monitor is disconnected when DDC/CI is OFF.

Power Indicator Use this function to set the power indicator on the front side of the product to

On or Off .

Factory Reset Select this option to return to the default factory settings.

A27

Troubleshooting

Check the following before calling for service.

Is the power cord of the display connected?

• Check and see if the power cord is connected properly to the power outlet.

Is the power indicator light on?

• Press the Power button.

Is the power indicator amber ?

• If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.

• Try to turn on the PC.

Do you see an "OUT OF

RANGE" message on the screen?

• This message appears when the signal from the

PC (video card) is out of horizontal or vertical frequency range of the display. See the

'Specifications' section of this manual and configure your display again.

Do you see a "CHECK

SIGNAL CABLE" message on the screen?

• This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.

Do you see a "OSD LOCKED" message on the screen?

Do you see “OSD

LOCKED” when you push MENU button?

• You can secure the current control settings, so that they cannot be inadvertently changed.

You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message

“OSD UNLOCKED” will appear.

A

28

Troubleshooting

Display image is incorrect

Display Position is incorrect.

• Press the O

K button twice to automatically adjust your display image to the ideal setting.

If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display.

● On the screen background, vertical bars or stripes are visible.

• Press the O

K button twice to automatically adjust your display image to the ideal setting.

If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display.

● Any horizontal noise appearing in any image or characters are not clearly portrayed.

• Press the O

K button twice to automatically adjust your display image to the ideal setting.

If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display.

• Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits

(true color).

Important

Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution .

If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.

The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer .

Troubleshooting

Display image is incorrect

● The screen color is mono or abnormal.

• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.

• Make sure the video card is properly inserted in the slot.

• Set the color setting higher than 24 bits (true color) at Control Panel - Settings .

● The screen blinks.

• Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA

DDC) monitor found" message?

Have you installed the display driver?

• Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com.

• Make sure to check if the video card supports

Plug&Play function.

A

30

Specifications LSM1850

Display

Sync Input

Video Input

Resolution

Plug&Play

Power

Consumption

Dimensions

& Weight

Tilt Range

Power Input

Environmental

Conditions

Stand Base

Power cord

1

8.51

inches (4

7

.

0

1 cm) Flat Panel Active matrix-TFT LCD

Anti-Glare coating

Visible diagonal size: 4

7

.

0

1 cm

0.

100

*0.

100

mm pixel pitch

Horizontal Freq.

Analog : 30 -

61

kHz (Automatic)

Digital : 30 -

61

kHz (Automatic)

Vertical Freq.

56 - 75 Hz (Automatic)

Input Form Separate TTL, Positive/Negative

Digital (HDCP)

Signal Input

Input Form

Max

Recommend

15 pin D-Sub Connector

DVI - D Connector (Digital)

RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Analog : VESA 1

366

x

768

@

60

Hz

Digital : VESA 1

366

x

768

@ 60 Hz

VESA 1

360

x

768

@60 Hz

DDC 2B

On Mode

Sleep Mode

Off Mode

: 3

5

W(Typ.)

2

W

≤ 1 W

With Stand Without Stand

Width 4

5

.

4

4 cm /

17

.

89

inch es 45

.

4

4 cm /

17

.

89

inches

Height

35

.

65

cm / 1

4

.0

4

inch es 31

.

1

0 cm / 1

2

.

24

inches

4

5.

65

cm /

17

.

97

inches

Depth 2

7

.1

1

cm /

10

.

67

inch es 7

.

5

8 cm / 2.9

8

inches

Net

Tilt

5

.

89

kg (

13.09

lbs)

-

5

˚~ 1

5

˚

AC 100-240V~ 50/60Hz 0.8A

Operating Conditions

Temperature 10˚C to 35 ˚C

Humidity

2

0 % to 80 %

Storage Conditions

Temperature -

1

0˚C to 60 ˚C

non-Condensing

Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type or PC-outlet type

NOTE

Information in this document is subject to change without notice.

A31

Specifications LSM2150

Display

Sync Input

Video Input

Resolution

Plug&Play

Power

Consumption

Dimensions

& Weight

Tilt Range

Power Input

Environmental

Conditions

Stand Base

Power cord

2

1

.

53

inches (5

4

.

68

cm) Flat Panel Active matrix-TFT LCD Anti-

Glare coating

Visible diagonal size: 5

4

.

68

cm

0.2

4

8*0.2

4

8 mm pixel pitch

Horizontal Freq.

Analog : 30 - 83 kHz (Automatic)

Digital : 30 - 83 kHz (Automatic)

Vertical Freq.

Input Form

56 - 75 Hz (Automatic)

Separate TTL, Positive/Negative

Digital (HDCP)

Signal Input

Input Form

Max

Recommend

15 pin D-Sub Connector

DVI - D connector (Digital)

RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Analog : VESA 1

92

0 x 10

8

0 @60 Hz

Digital : VESA 1

92

0 x 10

8

0 @60 Hz

VESA 1

92

0 x 10

8

0 @60 Hz

DDC 2B

On Mode

Sleep Mode

Off Mode

: 4

5

W(Typ.)

2

W

≤ 1 W

With Stand Without Stand

Width

51

.

96

cm /

20

.

4

6 inch es 51

.

96

cm /

20

.

4

6 inches

Height

36

.

83

cm / 1

4

.

50

inch es 34

.9

6

cm / 1

3

.

76

inches

46

.

83

cm /

18

.4

4

inches

Depth 2

7

.1

1

cm /

10

.

67

inch es 7

.8

0

cm /

3

.

07

inches

Net

6

.

68

kg (1

4

.

84

lbs)

Tilt -

5

˚~ 1

5

˚

AC 100-240V~ 50/60Hz 1.0A

Operating Conditions

Temperature 10˚C to 35 ˚C

Humidity

2

0 % to 80 %

Storage Conditions

Temperature -

1

0˚C to 60 ˚C

non-Condensing

Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type or PC-outlet type

NOTE

Information in this document is subject to change without notice.

A32

Specifications

Preset Modes (Resolution)

PC Mode

1

8

inch monitor

* 9

10

7

8

5

6

3

4

1

2

Display Modes (Resolution)

720 x 400

640 x 480

640 x 480

800 x 600

800 x 600

1024 x 768

1024 x 768

1280 x

768

1

36

0 x

768

1

366

x

768

Horizontal Freq. (kHz) Vertical Freq. (Hz)

31.468

70

31.469

60

37.500

75

37.879

60

46.875

75

48.363

60

60.123

75

47.776 6 0

4

7.7

12

47.700

60

60

*Recommend Mode

21 inch monitor

Display Modes (Resolution)

7

8

5

6

3

4

1

2

9

10

11

12

*1

3

720 x 400

640 x 480

640 x 480

800 x 600

800 x 600

1024 x 768

1024 x 768

1152 x 864

1280 x 1024

1280 x 1024

1680 x 1050

1680 x 1050

1

92

0 x 10

8

0

Horizontal Freq. (kHz)

31.468

31.469

37.500

37.879

46.875

48.363

60.123

67.500

63.981

79.976

64.674

65.290

6

6

.

587

Vertical Freq. (Hz)

75

60

75

75

70

60

75

60

60

75

60

60

60

*Recommend Mode

Indicator

MODE

On Mode

Sleep Mode

Off Mode

LED Color blue amber

Off

A33

Specifications

Preset Modes (Resolution)

DTV Mode

1

8

inch monitor

7

8

5

6

9

3

4

1

2

Display Modes (Resolution)

720 x 4

8

0

72

0 x 480

72

0 x

576

12

80 x

72

0

12

80 x

72

0

12

80

x 7

20

1

920

x

1080

1

920

x

1080

1

920

x

1080

Horizontal Freq. (kHz) Vertical Freq. (Hz)

31.4

7 60

31.

50

3

1

.

2

5

37.

50

4

4

.

96

45.00

33.72

33.75 6 0

28.125

60

5

5

0

0

60

60

60

50

21 inch monitor

7

8

5

6

3

4

1

2

9

10

11

12

1

3

1

4

1

5

1

6

1

7

Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)

720 x 4

80 15

.

75 60

72

0 x 480

15.73 60

72

0 x

576 15.625 50

72

0 x

480 31.47 60

72

0 x

480 31.50 60

720

x

5

76

31.25 50

1

280

x 7

20 44.96 60

1

280

x

720 45.

00

60

1280 x

720 37.50 50

1

920

x 10

80 33.72 60

1

92

0 x 10

8

0

33.75 60

1

92

0 x 10

8

0

28.125 50

1

92

0 x 10

80

6

7

.

43 60

1

920 x 10

80 67.50 60

1

92

0 x 10

8

0

56.25 50

1

92

0 x 10

8

0

27.00 24

1

92

0 x 10

80 33.75 30

A34

Installing the Wall mount plate

This monitor satisfies the specifications of the Wall mount plate or the interchange device.

1

.

Place the monitor with its front facing downward on a soft cloth.

2

.

Separate the stand after firstly separating 4 screws by using a driver as figure.

3 .

Install the Wall mount plate.

Wall mount plate(Separate purchase)

This is stand-type or wall mount type and is connectable with Wall mount plate.

Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.

Kensington Security Slot

Connected to a locking cable that can be purchased separately at most computer stores.

A35

Digitally yours

advertisement

Related manuals

Download PDF

advertisement