Bluetooth Headphone
SBKO 4.0 C1
USER MANUAL
SILVER CREST
FCC ID: 2AJ9O-SBKO40C1
Table of contents
1 Introduction
2 Package content
3 Connection diagram
4 The way to change earhook
5 How to use
5.1 General functions
5.2 Pairing to mobile phone
5.3 Charging your
device
6 Technology specification
7 After-sales service and support
8 FAQ
9 WARNING
1
2
2
2
2
4
5
6
6
1
1
7
8
C5 USER MANUAL
1.Introduction
Thank you for choosing the Stereo Ear Buds. This manual
will help you operate the Ear Buds, but you should first familiarize yourself with the Bluetooth functionality of your
mobile phone or other devices before using the Ear Buds.
Safety Rules
1\ Please follow the rules depicted in this manual closely
to ensure your safety. Before using this Ear Buds, we
would strongly encourage you to read through this user
manual.
2\ Be more wary of any edges, uneven surfaces, metal
parts, accessories and its packaging so as to prevent
any possible injury or damage.
3\ Do not modify, repair or dismantle this Ear Buds.
Doing so may result in fires, electric shocks,
complete breakdown of this Ear Buds, etc. All
of which, are not covered under warranty.
4\ Do not use any diluents or volatile liquid to clean the
Ear Buds
5\ Do not use the Ear Buds in a hazardous location.
2.package content
1X Wireless Ear Buds C5
1X USB Charger cable
1X User Manual
1
C5 USER MANUAL
3.Connection Diagram
left right
Turn on/Play / pause/Turn off /
Answer call/
End call/
Reject call/
Transfer call voice
Last number redial
USB
4.The way to change earhook
1
2 3
Next /Volume up
Factory reset
Previous/Volume down
4
MIC
5.How to use
5.1. General Functions
Desired Result Required Action
Turn on
Enter the pairing mode
Pairing
Press the “ ” button for 3 seconds when the device is off. (Red LED slowly flashes and a tone voice beeps)
When the device is off, Press the “ ” button
for 6 seconds.(Blue LED and Red LED quickly flash alternately with two beep tone voice).
In pairing Mode use a Bluetooth function mobile phone or other Bluetooth Master
Device and to perform pairing action
(detail refer to the chapter about pairing)
2
C5 USER MANUAL
Desired Result Required Action
Play / pause
Next /
Volume up
Previous /
Volume down
Turn off
Short click “ ” to play when the device is pausing and short click “ ” to pause when the device is playing.
Short press the “+” button for Next music
Long press the “+” button for Volume up
Short press the “-” button for Previous music
Long press the “-” button for Volume down
Press the “ ” button for 3 seconds when the device is on.(A tone voice beep and all
LED is off)
Low battery warning
The Red LED flash
Charging
Answer call
End call
Transfer call voice
Reject call
Battery power indication
Enable/Disable
Multipoint
Plug the charger to port of the device.
(Red LED is on)
Short Press the “ ” button while a call coming
Short Press the “ ” button while on going call
Double Press the “ ” button to transfer the call voice between the mobile phone and device while on going call
Press the “ ” button for 1~2 seconds to reject call when the call is ringing
Battery status will be shown on the top right corner of the phone screen after connected.
(Only support iphone, iPad)
Short press the “ ”button to enable Multipoint at pairing modeDouble press the “ ” button to disable the Multipoint at pairing mode
3
C5 USER MANUAL
Desired Result
Factory reset
Required Action
Long press“+”button for 6 seconds at pairing mode to clear the paired device list.
Last number redial Double click“ ”button on connect state.
5.2.Pairing to Mobile phone or other device
To use your Ear Buds , you must first pair your Ear Buds with a phone or a computer. Once your Ear Buds is paired to a specific mobile phone, they will remain paired and
automatically recognize each other whenever they are within range.
Pairing to a phone and Entertainment:
Turn on your phone and ensure its Bluetooth function
is activated
Turn on the Ear Buds go to the paring mode.
Search your Bluetooth devices on your phone by
following the phone's instructions. Refer to your phone's
user manual for more information.
After a few second the phone will list the device as a
discover device. Select it and follow your phone
instruction to select this pairing.
Then your phone will request a passkey or PIN, enter
0000 as your PIN or passkey.
Your phone will confirm the pairing, and then press Yes/Ok.
Finally, select to connect with device from your phone.
You can play music; watch TV/movie and play game with
your phone, then your can hear all the sound or music
form the device. Also you can control the player by
operating the device. Example, volume up and next music.
4
C5 USER MANUAL
Pairing to a computer and Entertainment:
If there is no Bluetooth function supported by your
computer, a Bluetooth adapter is necessary. Fix the
adapter with your computer and ensure its Bluetooth
function is activated.
Turn on the device and go to the paring mode.
Open the Bluetooth software (such as BlueSoleil)
installed on your computer, and selects “Search your
Bluetooth devices” function. Refer to user manual of the
Bluetooth software for more information.
After a few second the “ device name” will list in Bluetooth
software of your computer as a discover device.
Select this icon and click right button of mouse to select
“pairing” item,then select “connect with audio device” with
same operation.
Open your media player to play music, watch
TV/move and play game, then all the sound will be
playback on your device.
5.3.Charging your device
The device is convenient to connect to AC charger or a USB charger with Micro USB port marked with.Make sure that your device is full charged for at least 6 hours before initial use. Insert one terminal of your charger to AC main or USB port of PC and other terminal to Micro USB . While charging, the red LED light constantly. When charging is completed, the indicator LED turns red to blue.
5
C5 USER MANUAL
Warning:
You must select a qualified charger from a regular manufacturer.
You must charge the Ear Buds if it has been not used for more than 12 months.
Please don't use the USB charger on any other phone jack device
6.Technical specification
Parameter Value
Bluetooth Specification Bluetooth 4.1
Bluetooth Profile
RF Range
Frequency Response
HFP1.6/A2DP1.2/ AVRCP1.4/HSP1.2
10 m
180Hz-20KHz
Receiver Output
Signal-To-Noise
Distortion
Playback Time
Charging Time
Dimension(L×W×H)
Weight
10mW
≥ 90dB
≤ 3.0%
About 5.5 Hours
About 80 min
661.4X24X29.5mm
15
.
5g
7.
After-sales service and support
If your device is not performing as it should,please take it to your local service providers or dealer for service.
6
C5 USER MANUAL
8.FAQ
1\Why is there no power even when the Ear Buds is power
on?
Ans: Ensure the battery is being charged up to 6 hours for
first time using. The LED is lighted when it starts
charging.
2\There is no sound when playback.
Ans: Check the connection between your device with
phone or computer, if the connection is not
established, please reconnect again. Make sure the
Ear Buds is paired and connected with your
target phone or other master device.
3\How can I know the Ear Buds has been fully charged?
Ans: When the indicator LED turns red to blue when it is
charging, it has been fully charged.
4\why the Ear Buds cannot connect with second phone?
Ans: Please set the Ear Buds to multipoint mode.
Connect the Ear Buds to phone A,
Once again enter to pairing mode (phone one, will
disconnect), and connect the Ear Buds to phoneB.
and then use phone A paired device list to reconnect
to the Ear Buds .
7 8
C5 USER MANUAL
