Quick Start Guide
1
2
Welcome
Thank you for choosing Arlo.
Getting started is easy.
3
What’s Included
4
USB cable
Arlo Q camera
TOP
Wall-mount plate
USB power adapter
4 Mounting screws
1
Plug In Your Camera
Connect one end of the USB cable to the port on the camera.
Plug the other end of the USB cable into the adapter.
Plug the USB adapter into a wall socket and wait for the camera LED to blink amber.
5
2
Get the App
For the best experience, download the Arlo app for your smartphone by scanning the QR code below or searching for
“Arlo” in the app store.
3
Get a New Account
Already have an account? See Add Devices to an Existing
Account on page 8.
Launch the app from your smartphone and tap the New System
Setup button. Follow the onscreen instructions.
Or from a computer, visit https://arlo.netgear.com/#/login and click the New System Setup button. Select Arlo Q .
6 https://arlo.netgear.com
7
Available AFTER beta
8
Add Devices to an Existing Account
Launch the Arlo app and log in to your account .
Tap the Add Device button, select Arlo Q , and follow the onscreen instructions.
4
Connect Your Camera
Follow the onscreen instructions from either the Arlo app or from a computer to connect your camera directly to your WiFi router.
Note: If you own an Arlo wire-free system, do not connect your
Arlo Q camera to the Arlo base station.
9
5
Place or Mount Your Camera
You can place your camera on a shelf or other flat surface, or you can mount it on the wall.
If you are mounting the camera on a wall, place the wall plate and secure it in place with four screws.
Slide the camera into the wall plate.
10
Note: The camera base includes a magnet that can help position a camera on a metal surface.
11
12
You’re Done!
Congratulations! Your Arlo camera is set up and ready to go.
To view useful tutorial videos, find troubleshooting tips, or get support, visit http://support.arlo.com
.
Camera LED Guide
Solid amber
The camera is booting up.
Slow blinking amber
The camera is powered on and is ready for setup.
Fast blinking amber
The camera is not connected to a
WiFi network yet.
Solid blue
The camera is powered on and is connected to Arlo servers.
Slow blinking blue
The camera is connecting to a
WiFi network.
Fast blinking blue
The camera is connecting to Arlo servers.
Solid purple
The camera is connected to a WiFi network however it is not connected to the Internet.
Blinking purple
The camera is too far away from the router.
Blinking blue/ amber
A firmware update is in progress. DO
NOT TURN OFF THE
CAMERA.
Off
The camera is powered off.
13
14
Notes Notes
15
©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and
Arlo are trademarks of NETGEAR, Inc.
Compliance
For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit http://www.netgear.com/about/regulatory/ .
350 East Plumeria Drive
San Jose, CA 95134, USA
September 2015
16
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Industry Canada statement: aux appareils radio exempts de licence. Son fonctionnement est sujet aux
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage doit accepter tout brouillage reçu, y compris un brouillage susceptible de préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y provoquer un fonctionnement indésirable.
Caution : indésirable.
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite uniquement pour une utilisation à l’intérieur afin de réduire les risques de
(v) Users should also be advised that high-power radars are allocated as primary brouillage préjudiciable aux systèmes de satellites mobiles utilisant les users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and mêmes canaux; that these radars could cause interference and/or damage to LE-LAN devices.
Avertissement: radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.,
Le guide d'utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment : r.e;
Déclaration d'exposition aux radiations:
725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour
établies pour un environnement non contrôlé. Cet équipement doit être
(iv) les pires angles d'inclinaison nécessaires pour rester conforme à l'exigence de installé et utilisé avec un minimum de 20 cm de distance entre la source de la p.i.r.e. applicable au masque d'élévation, et énoncée à la section 6.2.2 3), rayonnement et votre corps. doivent être clairement indiqués.
(v) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements
ISED établies pour un environnement non contrôlé.
Cet équipement doit
être installé et utilisé avec un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN60950-1/A12:2011+A2:2013
Safety of Information Technology Equipment
EN 62311:2008
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz) (IEC 62311:2007 (Modified))
EN 300 328 V1.9.1:2015
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2.4GHz ISM band andusing wide band modulation techniques; Harmonized EN covering the essential requirements of article
3.2 of the R&TTE Directive
EN 301 893 V1.8.1:2015
Broadband Radio Access Networks (BRAN); 5GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
-
EN 301 489-1 V1.9.2:2011
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical
requirements
EN 301 489-17 V2.2.1:2012
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for
Broadband Data Transmission Systems
Č esky
[Czech]
Dansk
[Danish]
Deutsch
[German]
Eesti
[Estonian]
[Jméno výrobce] tímto prohlašuje, že tento [typ za ř ízení] je ve shod ě se základními požadavky a dalšími p ř íslušnými ustanoveními sm ě rnice 1999/5/ES.
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Hiermit erklärt [Name des Herstellers] , dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele
Malti
[Maltese]
Magyar
[Hungarian]
Polski
[Polish]
Português
[Portuguese]
Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Finnish]
Svenska
[Swedish] sätetele.
English
Español
[Spanish]
Ελληνική
[Greek]
Français
[French]
Hereby, [NETGEAR, Inc.] , declares that this [Arlo Q] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ ΕΚ .
Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano
[Italian]
Latviski
[Latvian]
Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Ar šo [name of manufacturer / izgatavot ā ja nosaukums] deklar ē , ka [type of equipment / iek ā rtas tips] atbilst Direkt ī vas 1999/5/EK b ū tiskaj ā m pras ī b ā m un citiem ar to saist ī tajiem noteikumiem.
Lietuvi ų
[Lithuanian]
Nederlands
[Dutch]
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Hawnhekk, [isem tal-manifattur] , jiddikjara li dan [il-mudel tal-prodott] jikkonforma malħ ti ġ ijiet essenzjali u ma provvedimenti o ħ rajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Niniejszym [nazwa producenta] o ś wiadcza, ż e [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozosta ł ymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolo č ili direktive 1999/5/ES.
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] sp ĺň a základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
