SANSUi VRDVD4100BA DVD player OWNER'S MANUAL

Below you will find brief information for DVD player VRDVD4100BA. This DVD player VRDVD4100BA combines a DVD/CD player and a Hi-Fi Video cassette recorder in a unique space-saving design. The DVD disc has a much larger capacity than an audio CD, but is the same size. Picture quality is superior to Super VHS, and audio quality surpasses that of audio CDs. Using the DVD PLAYER, you can even play back audio CDs. This player also includes a VCR section with features such as stereo/SAP reception, 4 video heads, a 19µm HEAD, Hi-Fi Stereo Sound, and One-touch Timer Recording (OTR). This unit is compatible with a wide range of DVD audio outputs. This DVD player also supports Progressive scan for better picture quality when connected to a progressive display. The DVD section provides a variety of features such as Multi-Language, Multi-Angle, Repeat Playback, Zoom, and Parental Control. To ensure safe and proper use of this unit, please read this manual thoroughly before operating the unit.

PDF Download

Document

DRAFT

OWNER'S MANUAL

DVD PLAYER/Hi-Fi VIDEO CASSETTE RECORDER

VRDVD4100B A

2F3PJ01A[E] Cover

ATTENTION

If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code.

TV/CABLE MODE SELECTION

When shipped from the factory, the TV/CABLE menu option is set to the “CABLE”

(Cable TV) mode.

If not using CABLE (Cable TV), set this menu option to the “TV” mode.

IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED

PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL

CUSTOMER SERVICE – 1-800-289-0980

ORION WEBSITE

FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT

www.orionsalesinc.com

Before operating the unit, please read this manual thoroughly.

1 11/2/05, 11:41 AM

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a par ticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with the FCC

Rules could void the user's authority to operate this equipment.

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY AND RETAIN FOR

FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCA-

TION-SEE SERVICE PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER

RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

Location of the required Marking

The rating sheet and the safety caution are on the rear of the unit.

CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE

STANDARDS, 21 CFR SUBCHAPTER J.

2F3PJ01A[E](02-05) 2 11/2/05, 11:46 AM

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table.

PORTABLE CART WARNING

(symbol provided by RETAC)

The unit may fall, causing serious injury, and serious damage to the unit.

8A.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure reliable operation of the unit, and to protect it from overheating.

S3125A

These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and/or the manufacturer’s instructions have been adhered to.

10. POWER SOURCES

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code,

ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

3

2F3PJ01A[E](02-05) 3 11/1/05, 16:57

IMPORTANT SAFEGUARDS

19. DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.

e. If the unit has been dropped or the cabinet has been damaged.

f. When the unit exhibits a distinct change in performance, this indicates a need for service.

20. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

21. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

22. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products

(including amplifiers) that produce heat.

23. DISC TRAY

Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.

24. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

25. LASER BEAM

Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage.

26. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

27. NOTE TO CABLE TV SYSTEM INSTALLER

This reminder is provided to call the CABLE TV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

GROUND CLAMP ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC-NATIONAL ELECTRICAL CODE

S2898A

CONDENSATION

Moisture will form in the operating section of the DVD/VCR if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the DVD/VCR's performance will be impaired.

To prevent this, let the DVD/VCR stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.

Condensation may also form during the summer if the DVD/VCR is exposed to the breeze from an air conditioner. In such cases, change the location of the DVD/VCR.

4

2F3PJ01A[E](02-05) 4 11/1/05, 16:57

Features

DVD/CD Player/Video Cassette Recorder

• DVD/CD player with Video Cassette Recorder - Unique space saving design combines a DVD/CD player and a Hi-Fi Video cassette recorder. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture quality is higher than

Super VHS. Audio quality is higher than audio CD. The DVD PLAYER can play back audio CDs.

• High Quality Picture - More than 500 lines (VCR mode: 230 lines) of Horizontal Resolution. It exceeds Super VHS (400 lines) or Laser Disc (430 lines) in resolution.

VCR Section

• Stereo/SAP Reception - This VCR is designed to receive stereo and second audio program (SAP) broadcasts where available.

• 4 Video Heads - Provides optimal picture quality for special effects playback.

• 19

µ m HEAD - For superior picture quality even in SLP mode, 19 micron width technology helps to avoid crosstalk and boost

SLP picture quality to near SP levels. With precision technology, ghosts and color beats are virtually eliminated.

• Hi-Fi Stereo Sound - With a frequency response of 20 to 20,000 Hz and a dynamic range of better than 90dB, this VCR provides a level of excellence that rivals compact discs.

• One-touch Timer Recording (OTR) - Simply by pressing the REC/OTR button, the VCR can be programmed for up to 6 hours of recording with an immediate start.

DVD Section

• Compatible with a wide range of DVD audio outputs

Digital Audio Jack (Coaxial):

• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect of being in a movie theater or a concert hall.

• The MPEG audio of DVD discs recorded in this format can be enjoyed.

• The Linear PCM sound of a 48 kHz/16 bit through 96 kHz/24 bit exceeds audio CD sound.

• Progressive scan - Progressive scan displays all the horizontal lines of a picture at one time, as a single frame. This unit converts the interlaced (480i) video from DVD into progressive (480p) format for connection to a progressive display. It increases the vertical resolution.

• Multi-Language - Since this DVD matches with 124 language-subtitles/-soundtracks, you can enjoy selecting a favorite one

(You cannot select the language that is not recorded on the disc).

• Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc, you can change the angles during playback (If a Multi-Angle is not recorded on the disc, you can not change the angle).

• Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.

• Program/Random Playback (CD) - You can play back tracks in programmed or random-selected sequences.

• Zoom - You can zoom in on the selected subject on the screen during playback.

• Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor/television on a suitable disc.

• Parental Control - You can limit the playback of scenes or sounds of adult DVD discs which have a parental level rating.

* This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

* is a trademark of DVD Format/Logo Licensing Corporation.

* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

* Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.

5

2F3PJ01A[E](02-05) 5 11/1/05, 16:57

IMPORTANT SAFEGUARDS .................................. 3

Features ................................................................... 5

Contents ................................................................... 6

Parts and functions .................................................. 7

Remote control ......................................................... 8

Power source ........................................................... 9

Basic connections .................................................. 10

Antenna to DVD/VCR connection ..................... 10

DVD/VCR to TV connection .............................. 10

CABLE TV connections ......................................... 11

Playback connections ............................................ 12

Setting up the VCR section .................................... 14

Setting the video channel .................................. 14

Setting the language ......................................... 14

Auto clock setting .............................................. 15

Manual clock setting ......................................... 16

Tuner setting ..................................................... 16

To add/delete channels ..................................... 16

Noise elimination ............................................... 16

Tape playback operation ........................................ 17

Loading and Unloading a cassette tape ............ 17

Cassette tape playback ..................................... 17

Special playback ............................................... 17

ZERO RETURN function .................................. 18

Video index search system ............................... 18

Recording ............................................................... 19

Recording a TV program ................................... 19

One-touch Timer Recording (OTR) ................... 20

Timer recording ................................................. 20

Advanced function of VCR section ........................ 22

Stereo recording and playback ......................... 22

Second Audio Program (SAP) .......................... 22

Duplicating a video tape .................................... 22

Disc playback operation ......................................... 23

Disc ................................................................... 23

Setting setup language ..................................... 23

Playback procedure .......................................... 24

Special playback ............................................... 24

Zooming ............................................................ 24

Locating desired scene ..................................... 25

Marking desired scenes .................................... 25

Changing soundtrack language ........................ 25

Subtitles ............................................................ 25

Changing angles ............................................... 26

Title selection .................................................... 26

DVD menu ........................................................ 26

Repeat playback ............................................... 26

Program playback (CD) .................................... 26

Random playback (CD) ..................................... 27

MP3 playback ................................................... 27

Advanced function of DVD section ........................ 28

Parental control ................................................. 28

Temporary disabling of rating level by

DVD disc ........................................................... 28

Setting language ............................................... 29

Setting the aspect ratio of TV screen ................ 29

Setting the picture mode ................................... 29

Setting on screen display .................................. 30

Status display of disc ........................................ 30

Dynamic Range Control .................................... 30

Progressive scan .............................................. 30

Language code list ................................................. 31

Problems and troubleshooting ............................... 32

Video head cleaning .............................................. 33

Specifications ......................................................... 34

6

2F3PJ01A[E](06-09) 6 11/1/05, 16:57

Front

Parts and functions

VCR/DVD mode selector button

Cassette Loading Slot

PLAY button

EJECT button

OPEN/CLOSE button STOP button

Disc tray

POWER

VIDEO IN L - AUDIO IN - R

VCR CHANNEL VCR/DVD

DVD

VCR

DVD

Display window

POWER button

Remote sensor

AUDIO (L/R)/VIDEO IN jacks

CHANNEL / buttons

VCR indicator

REW (Rewind) button

DVD indicator

REC button

FF (Fast Forward) button

Display window

Play indicator

VCR indicator Pause indicator DVD indicator

REC indicator

TRK indicator

CD indicator

PM indicator

Video tape indicator

Number indicator (Track playing time or other information)

Progressive scanning indicator

Timer recording indicator

NOTE:

Some discs may be displayed wrong or e.g. chapter number, playback time, etc. may not be displayed.

Rear

DVD COAXIAL DIGITAL AUDIO OUT jack

DVD S-VIDEO OUT jack

AC power cord

DVD/VCR common AUDIO (L/R)/VIDEO OUT jacks

RF IN jack

2F3PJ01A[E](06-09) 7

DVD AUDIO (L/R) OUT jacks

DVD COMPONENT OUT jacks

RF OUT jack

11/1/05, 16:57

7 Remote control

POWER [9]

EJECT [17]

0 – 9 [16]

SETUP [23]

VCR MENU [14]

CH / [9]

TRK/SET + / – [14]

Cursor Buttons [15]

DVD MENU [26]

STOP [17] [24]

SKIP [24]

INDEX + / – [18]

MARKER [25]

AUDIO [25]

AUDIO SELECT [22]

REC/OTR [19]

ZOOM [24]

JUMP [25]

ZERO RETURN [18]

SUBTITLE [25]

ATR [18]

8

2F3PJ01A[E](06-09) 8 11/1/05, 16:57

VCR/DVD [9]

OPEN/CLOSE [24]

TIMER REC [20]

INPUT SELECT [22]

PROGRESSIVE [30]

DISPLAY [15] [25]

RETURN [23]

TOP MENU [26]

ENTER [14]

CANCEL [21]

PLAY [17] [24]

PAUSE/STILL [18] [24]

SEARCH + / – [17] [24]

SLOW [18] [24]

CLOCK/COUNTER [18]

TV/VCR [14]

REPEAT A-B [26]

ANGLE [26]

COUNTER RESET [18]

PLAY MODE [26]

SPEED [19]

Inserting Batteries

Open the battery compartment cover in the direction of the arrow.

Remote control / Power source

Install two “AAA” batteries (not supplied), paying attention to the polarity diagram in the battery compartment.

Replace the compartment cover.

Battery precautions

The precautions below should be followed when using batteries in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.

3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery manufacturer’s directions).

Remote control basics

• Press POWER to turn the DVD/VCR on or off.

• Press CH or CH to move through the channels one channel at a time.

• The CH / and SET +/– are also used to navigate on-screen menu system.

• You can directly access specific channels using Number keys pad.

• Each press of VCR/DVD on the remote control, switches the screen between the VCR screen (VCR mode) and the DVD screen (DVD mode).

Operation

• Aim the remote control at the remote sensor and press control buttons to operate.

• Operate the remote control within 30 ° angle on either side of the remote sensor, up to a distance of Approx. 5 meters.

Approx. 5 meters

Polarized AC Cord Plug

(One blade is wider than the other.)

2F3PJ01A[E](06-09)

Wider Hole and Blade

AC Outlet

Power source

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.

NOTES:

• Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). Use the attached power cord only.

• If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade. It is the user’s responsibility to have an electrician replace the obsolete outlet.

• If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from the AC outlet and plug it back in. The unit should return to normal operation.

9

11/1/05, 16:57

Basic connections

Antenna to DVD/VCR connection

The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV.

Below are 3 common methods of connecting an antenna system to a DVD/VCR. Find the type of antenna system you are using and follow the connection diagram.

Example 1: Combination VHF/UHF antenna with 75 ohm coaxial cable

75 ohm coaxial cable

DVD/VCR to TV connection

After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.

Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram.

This DVD/VCR has a single 75 ohm output for connection to a

TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.

Example 1: TV with single 75 ohm VHF/UHF antenna input

75 ohm coaxial cable (supplied)

DVD/VCR

VHF/UHF

IN (ANT)

Example 2: Combination VHF/UHF antenna with 300 ohm twin lead (flat) wire

Matching transformer

300 ohm input 75 ohm output (not supplied)

DVD/VCR

300 ohm twin lead

(flat) wire

Example 2: TV with 300 ohm UHF and 75 ohm VHF antenna inputs

75 ohm coaxial cable

(supplied)

UHF

VHF

DVD/VCR

Example 3: Separate VHF and UHF antennas

Combiner

75/300 ohm inputs

75 ohm output (not supplied)

VHF UHF

300 ohm twin lead (flat) wire

75 ohm coaxial cable

DVD/VCR

NOTE:

If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm inputs and one 75 ohm output.

NOTES:

• A clear picture will not be obtained by the main unit unless the antenna signal is good. Connect the antenna to the main unit properly.

• For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an outdoor type antenna is required.

• If you are not sure about the connection, please refer to qualified service personnel.

DVD/VCR

Splitter 75 ohm input

75/300 ohm outputs

(not supplied)

Example 3: TV with 300 ohm UHF and 300 ohm VHF antenna inputs

UHF

75 ohm coaxial cable

(supplied)

VHF

DVD/VCR

NOTE:

If a VHF or UHF antenna is used, set the TV/CABLE menu option to the “TV” mode.

Splitter 75 ohm input

300 ohm output

(not supplied)

10

2F3PJ01A[E](10-17) 10 11/1/05, 16:57

CABLE TV connections

Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/

VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a special channel which is scrambled, you must have a descrambler box for proper reception.

Example 1:

DVD/VCR

Incoming Cable

ALLOWS:

* Recording of nonscrambled channels.

* Use of the programmable timer.

* Recording of one channel while watching another.

Example 2:

DVD/VCR

Incoming

Cable

Converter/

Descrambler

ALLOWS:

* Recording of channels through the converter box

(scrambled and unscrambled).

* Using the programmable timer to record only the channel selected at the converter box.

PREVENTS:

* Recording one channel while watching another.

* Using the DVD/VCR tuner to select channels.

Example 3:

DVD/VCR

NOTE:

To record from converter/descrambler, DVD/

VCR tuner must be tuned to the converter output channel, usually channel 3 or 4.

Converter/Descrambler

Incoming Cable

ALLOWS:

* Recording of nonscrambled channels.

* Use of the programmable timer.

* Recording an unscrambled channel while watching any channel selected at the converter box.

PREVENT: Recording scrambled channels.

NOTE:

If you are playing a tape or using the tuner built into the DVD/VCR, the converter must be set to the video channel output of the DVD/

VCR (either 3 or 4).

NOTE: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR to the output of the Converter/Descrambler box, usually channel 3 or 4.

11

2F3PJ01A[E](10-17) 11 11/1/05, 16:57

Playback connections

The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

Connect to a TV with Audio/Video Output

You can enjoy playback by connecting the unit to a TV.

Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the supplied audio/video cable.

DVD/VCR

Audio (L) Output

Audio (R) Output

Video Output

To Video

Input

AUDIO/VIDEO cable (supplied)

To Audio (R) Input

To Audio (L) Input

Connect to a TV with S-Video Output (for DVD/CD playback)

If your TV has an S-VIDEO input, you can get higher quality by connecting it with the S-VIDEO output of the unit using the Svideo cable instead of connecting the video input of the TV to the VIDEO jack of the unit.

S-Video cable (not supplied)

DVD/VCR

S-Video Output

To S-Video

Input

Audio (L) Output

Audio (R) Output

AUDIO cable (not supplied)

To Audio (R) Input

To Audio (L) Input

Connect to a TV with Component Video Output (for DVD/CD playback)

You can enjoy high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the COMPONENT video cables (not supplied).

DVD/VCR

Audio (L) Output

To Component

Video Output

To Audio (L) Input

Audio (R) Output

AUDIO cable (not supplied)

To Audio (R) Input

COMPONENT VIDEO cable (not supplied)

To Component

Video Input

NOTES:

• When connecting to a TV using the VIDEO or S-VIDEO jack, make sure that the PROGRESSIVE indicator on the display window is not lit. If it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals and you cannot see any picture. To turn off the PROGRESSIVE indicator, make the Progressive scanning mode inactive

(See page 30).

• When the component video input jacks on a TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack

(not supplied).

12

2F3PJ01A[E](10-17) 12 11/1/05, 16:57

Playback connections

Connect to a Stereo Amplifier with Audio Output

You can enjoy high quality audio by connecting the audio output to your amplifier.

Connect the AUDIO OUT jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier.

DVD/VCR

Stereo Amplifier

Audio (L) Output

Audio (R) Output

AUDIO cable (not supplied)

To Audio (L) Input

To Audio (R) Input

Connect to an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems such as Dolby

Digital by using the Coaxial Digital Output.

Use this connection to connect an:

• AV amplifier with built-in *Dolby Digital decoder

DVD/VCR

Video Output

Coaxial Digital Audio Output

Coaxial digital cable (not supplied)

Video cable (not supplied)

To Video

Input

AV Amplifier with built-in various decoder as above

NOTE:

You may connect to a TV with a Component video cable (not supplied) or S-

Video cable (not supplied) instead of a video cable (not supplied).

•

NOTES:

The DVD OUTPUT jacks (COAXIAL, AUDIO L/R, S-VIDEO and COMPONENT) are useful only for DVD section. The VHS signal is output only from the composite jacks (DVD/VCR OUTPUT) and UHF/VHF OUT.

When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL to ON on the AV Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged.

This unit does not apply to DTS audio out. There will be no sound output if connected to AV amplifier with built-in DTS decoder.

13

2F3PJ01A[E](10-17) 13 11/1/05, 16:57

Setting up the VCR section

Setting the video channel

To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel).

When a TV is connected with the 75 ohm coaxial cable only.

Press and hold 3 or 4 on the remote control for 3 seconds in the standby mode to select

CH 3 or 4. The selected channel number will flash on the display for about 4 seconds.

Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 1 .

Press POWER to turn on the DVD/VCR.

Press VCR/DVD to select the VCR mode. The VCR indicator on the front panel will light.

Press TV/VCR to select the VCR position.

The VCR indicator will appear in the display.

Select any channel to receive a TV station in your area.

The channel number will appear on the screen for about

4 seconds.

For a push-button TV tuner

If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/4 channel selector and the TV to CH 3 or 4, playback a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to your TV owner's manual for details.

NOTES:

• When shipped from factory, the video channel is set to

CH 3.

• If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the

AC power cord once, then connect it again.

Setting the language

You can choose from three different languages

(English, French and Spanish) for the on-screen displays.

Press VCR MENU .

The VCR menu screen will appear. Press or – to select the

SET +

TIMER REC SET

AUTO REPEAT ON OFF

SAP

CH SETUP

ON OFF

SYSTEM SETUP

“SYSTEM SETUP” menu, then press ENTER .

If you use the unit for the first time and press VCR

⟨

+/-/ENTER/MENU

⟩

MENU , instead of the main menu screen on the right the

“SYSTEM SETUP” menu screen in step 2 may appear.

Press SET + or – to select the “LANGUAGE” option, then press ENTER .

SYSTEM SETUP

CLOCK SET

LANGUAGE/IDIOMA/LANGUE

NO NOISE BACKGROUND

ON OFF

AUTO CLOCK

STANDARD TIME

ON OFF

DAYLIGHT SAVING TIME

⟨ +/-/ENTER/MENU ⟩

Press SET + or – to select the desired language: English (ENGLISH), Spanish

(ESPAÑOL) or French

(FRANCAIS), then press

ENTER .

Press VCR MENU until the MENU screen is cleared.

NOTES:

• Both the VCR and the DVD have their own menu option

(See page 23).

• If no buttons are pressed for more than 60 seconds, the

MENU screen will return to normal TV-operation automatically.

14

2F3PJ01A[E](10-17) 14 11/1/05, 16:57

Auto clock setting

The Auto clock function will automatically set the builtin clock (Month, Day, Year and Time) when the DVD/

VCR is connected to an Antenna or Cable system and it is turned off. As the DVD/VCR searches for a receivable station in your area and it receives a broadcast signal for Auto clock, the Auto clock needs several minutes to set itself.

Connect the Antenna or Cable system.

• If you use a cable box, turn it on.

Plug the AC Power cord to the AC outlet.

Make sure the DVD/VCR is turned off.

• If you press POWER , the Auto clock set is not effective.

After the clock is set on the display window, press

POWER .

• Depending on the reception condition, it may take approx.

thirty minutes.

Press DISPLAY to check the clock on the screen.

If the clock is not set, check the Antenna condition. The

Auto clock may not function properly if the reception condition is not good.

Auto clock adjustment

The Auto clock adjustment will be performed at 6:00 AM, 12:00

PM and 6:00 PM everyday if you turn off the DVD/VCR.

• If you use a cable box and you want Auto clock adjustment to be performed, the cable box must be left on.

• The Auto clock adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time.

To set Auto clock to off

When shipped from factory, the “AUTO CLOCK” option is set to ON.

But if you do not want Auto clock set (adjustment):

Turn on the DVD/VCR.

Press VCR MENU .

Press SET + or – to select the “SYSTEM SETUP’ option, then press ENTER .

Press SET + or – to select the “AUTO CLOCK” option.

Press ENTER to select “OFF”.

Press VCR MENU repeatedly to return to the normal screen.

• When the “AUTO CLOCK” is set to “OFF”, the Auto Clock adjustment does not function.

• Set the clock manually (see page 16).

To set standard time

In the rare event that you live within broadcast range of two stations in two different time zones, the DVD/VCR may recognize the wrong station for the Auto clock set.

To correct the situation:

Press VCR MENU .

Press SET + or – to select the “SYSTEM SETUP” option, then press ENTER .

Press SET + or – to select the “STANDARD TIME” option, then press ENTER .

Setting up the VCR section

Press SET + or – to select your time zone, then press

ENTER .

ATLANTIC : GMT – 4 hours

(GMT: Greenwich Mean Time)

EASTERN

CENTRAL :

: GMT – 5 hours

GMT – 6 hours

MOUNTAIN : GMT – 7 hours

PACIFIC

ALASKA

HAWAII

AUTO

: GMT – 8 hours

: GMT – 9 hours

: GMT – 10 hours

: AUTO SET

Press VCR MENU twice to return to the normal screen.

NOTE:

To be able to select the standard time, the clock must first be set by “AUTO CLOCK” once.

Daylight saving time setting

You can set the Daylight saving time automatically or manually.

Press VCR MENU . Press SET + or – to select the “SYSTEM

SETUP” option, then press

ENTER .

TIMER REC SET

AUTO REPEAT ON OFF

SAP

CH SETUP

ON OFF

SYSTEM SETUP

⟨ +/-/ENTER/MENU ⟩

Press SET + or – to select the

“DAYLIGHT SAVING TIME” option, then press ENTER .

SYSTEM SETUP

CLOCK SET

LANGUAGE/IDIOMA/LANGUE

NO NOISE BACKGROUND

ON OFF

AUTO CLOCK

STANDARD TIME

ON OFF

DAYLIGHT SAVING TIME

⟨ +/-/ENTER/MENU ⟩

Press SET + or – to select one of the options, then press ENTER .

Press VCR MENU until the

MENU screen is cleared.

ON: for manual setting

(forward one hour)

OFF: for manual setting

(back one hour)

AUTO: for automatic setting

(read XDS in the signal)

á ñ

When you want to set the Daylight Saving Time manually, on the first Sunday in April you set to “ON”, and on the last Sunday in October you set to “OFF”.

NOTES:

• When shipped from factory, the “DAYLIGHT SAVING

TIME” option is set to “AUTO” position.

• When the clock is not set, Daylight Saving Time setting is not available.

• When there is no Daylight Saving Time in your area, always select “OFF” position in step 3 .

15

2F3PJ01A[E](10-17) 15 11/1/05, 16:57

Setting up the VCR section

Manual clock setting

You must set the date and time manually for Timer

Recordings, ON/OFF Timer and Daylight Saving Time if the Auto clock process did not set them correctly.

Example: Setting the clock to “8:30 AM”, 25th (SAT) March,

2005.

Press VCR MENU .

Press SET + or – to select the

“SYSTEM SETUP” option, then press ENTER .

TIMER REC SET

AUTO REPEAT

SAP

CH SETUP

SYSTEM SETUP

ON OFF

Press SET + or – to select the

“CLOCK SET” option, then press

ENTER .

Press SET + or – to set the month, then press ENTER .

Set the day, year and time as in step 3 .

⟨

+/-/ENTER/MENU

⟩

SYSTEM SETUP

CLOCK SET

LANGUAGE/IDIOMA/LANGUE

NO NOISE BACKGROUND

AUTO CLOCK

STANDARD TIME

ON OFF

DAYLIGHT SAVING TIME

⟨ +/-/ENTER/MENU ⟩

After setting the clock, date and time starts functioning automatically.

MONTH

DAY

YEAR

TIME

25 (SAT)

2006

8 : 30 AM

⟨

+/-/ENTER/CANCEL/MENU

⟩

NOTES:

• After a 30 minute power failure or disconnection of the power plug, the time display will be lost. In this case, set the present time again if the Auto clock did not set correctly.

• To move cursor backward, press CANCEL .

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/

VCR with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.

TV/CABLE selection

Press VCR MENU .

Press SET + or – to select the “CH

SETUP” mode, then press ENTER .

Automatic memory tuning

The VCR can receive a maximum of 181 channels by presetting the channels into memory.

In the “CH SETUP” menu, press

SET + or – to select “AUTO CH

MEMORY”, then press ENTER .

The DVD/VCR will begin memorizing all the channels available in your area.

á ñ

To add/delete channels

You can add the channels you want or delete the channels you do not want manually.

Press VCR MENU .

Press SET + or – to select the

“CH SETUP” mode, then press

ENTER .

Press SET + or – to select the

“ADD/DELETE” mode, then press

ENTER .

Select the desired channel to be memorized or deleted using SET

+ or – button, or using Number keys .

á ñ

ADD

á+/-/0-9/ENTER/MENUñ

CH 003

Press ENTER to select the “ADD” or “DELETE”.

Press VCR MENU until the MENU screen is cleared.

Noise elimination

When you don't want to receive a weak signal broadcast, the Blue back screen can be obtained by selecting the NO NOISE BACKGROUND “ON”. When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to the “ON”.

In the “SYSTEM SETUP” menu, press SET + or – to select “ NO

NOISE BACKGROUND”.

Press ENTER or “OFF”.

to select the “ON”

SYSTEM SETUP

CLOCK SET

LANGUAGE/IDIOMA/LANGUE

NO NOISE BACKGROUND

ON OFF

AUTO CLOCK

STANDARD TIME

ON OFF

DAYLIGHT SAVING TIME

⟨ +/-/ENTER/MENU ⟩

Press VCR MENU until the MENU screen is cleared.

á ñ

Press SET + or – to select the TV/

CABLE mode.

Press ENTER to select the TV or

CABLE mode.

The arrow indicates the selected mode.

á ñ

TV - VHF/UHF channels

CABLE - CABLE TV channels

Press VCR MENU until the MENU screen is cleared.

2F3PJ01A[E](10-17) 16 11/1/05, 18:11

Tape playback operation

Loading and Unloading a cassette tape Cassette tape playback

Use only video cassette tapes marked .

Loading

Push the center of the tape until it is automatically retracted into the unit.

Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically).

To start playback

Automatic power on and play

When loading a cassette tape without the erase prevention tab intact, the unit will turn on automatically and playback will start immediately.

Press PLAY to begin playback.

“ ” will appear on the screen.

Insert the cassette with its labeled side facing you.

An inverted video cassette cannot be inserted.

Unloading

To unload a video cassette, press EJECT on the remote control, or press 5 (EJECT) on the unit.

Automatic eject

If the unit automatically rewinds the tape to the beginning (AUTO REWIND FEATURE), the tape will be ejected automatically (See page 19).

To stop playback

Press STOP once.

The tape will stop, but remain fully loaded and ready to play.

“ ” will appear on the screen.

NOTES:

• This unit selects the playback tape speed SP, LP or SLP automatically.

• The Cassette tape and DVD disc can be played back simultaneously. If you press VCR/DVD , the tape playback and

DVD playback alternate with each other on the screen.

To rewind or forward the tape rapidly

Press REW or F.FWD in the Stop mode.

“ ” or “ ” will appear on the screen.

To prevent accidental erasure

After recording, break off the erase prevention tab if you do not wish to record over the tape.

Screwdriver

FORWARD/REVERSE PICTURE SEARCH

If you want to see the tape during REW or F.FWD mode, press and hold the REW or F.FWD

. The backward or forward visual search picture will be seen on the screen. Release to return to the REW or F.FWD mode.

Erase prevention tab

To record again

Cover the hole with adhesive tape.

Be careful the tape does not extend past the edges of the video cassette housing.

Adhesive tape

Tape Speed

SP (Standard Play)

SLP (Super Long Play)

Video cassette tape

T-160 T-120

2-2/3 hours 2 hours

8 hours 6 hours

T-60

1 hour

3 hours

Special playback

Picture Search

Reverse picture search function

Press REW x 1 or x 2 during the playback.

Forward picture search function

Press F.FWD

x 1 or x 2 during the playback.

To return to playback: Press PLAY .

SPEED SEARCH TIMES

TAPE SPEED

SP (Standard Play)

LP (Long Play)

PICTURE SEARCH SPEED

PRESS ONCE PRESS TWICE

3 X

7 X

5 X

9 X

SLP (Super Long Play) 9 X 15 X

Still Picture

Press PAUSE/STILL during playback. To resume normal playback: Press PLAY .

17

2F3PJ01A[E](10-17) 17 11/1/05, 16:57

Tape playback operation

Slow Motion

During playback press SLOW .

To return to playback: Press PLAY or SLOW .

Slow tracking and vertical lock adjustment

If noise bars appear in the picture during slow motion, press the TRK + or – to reduce the noise bars.

If the still picture jitters excessively, press TRK + or – to stabilize the still picture.

Frame by Frame Picture

Press PAUSE/STILL during playback.

Press SLOW one by one: The picture advances frame by frame.

To return to playback: Press PLAY or PAUSE/STILL .

Adjusting tracking condition

Automatic tracking adjustment

Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during playback, press TRK +/– to eliminate the noises.

“MANUAL TR.” will appear. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment.

• Press ATR to reactivate automatic tracking again.

“AUTO TR.” will appear.

Repeat playback

The entire video tape will be played until its end. The tape will then automatically rewind to the beginning and the playback will be repeated.

Press VCR MENU . Press SET + or – to select “AUTO

REPEAT”.

Then press ENTER to select “ON” or “OFF”.

If “ON” is selected, the playback will be repeated endlessly.

TIMER REC SET

AUTO REPEAT ON OFF

SAP

CH SETUP

ON OFF

SYSTEM SETUP

Press VCR MENU until the menu screen is cleared.

if you press DISPLAY , “ ” will appear on the screen.

To start the playback, press PLAY .

The playback will be repeated endlessly.

To cancel repeat mode :

Follow the above step 1 , then press ENTER to select the

OFF position. Press VCR MENU to return to the TV.

NOTES:

• The audio output is muted during Picture Search, Still Picture

Slow Motion and Frame by Frame Picture.

• During Picture Search mode there will be noise bars which are caused by the system.

• The Special Playback will automatically change to playback after approx. 5 minutes to protect the video tape against excessive wear.

ZERO RETURN function

This function makes tape-rewinding stop at the counter

00:00:00 position automatically.

VCR

Press DISPLAY .

The counter display shows the tape running time during playback or recording.

Press COUNTER RESET at the desired tape position. The counter

VCR display will be reset to the

“00:00:00” position (e.g. the beginning of recording).

Press STOP when playback or recording is finished.

Press ZERO RETURN .

The tape will be rewinded or fast forwarded and automatically stop at the “00:00:00” position.

The CLOCK/COUNTER-button

Press CLOCK/COUNTER . The clock and tape counter alternate with each other in the display.

•

NOTES:

If you rewind the tape beyond “00:00:00”, a minus sign

(“–”) will be displayed in front of the time.

When you load a tape, the counter will reset to “00:00:00”.

The counter does not function on nonrecorded (blank) sections of the tape. When you rewind, fast forward or play tapes through blank sections, the counter stops.

Video index search system

This function enables you to locate the beginning of any recording made on the VCR.

Recording an INDEX MARK

The Index Search function automatically records an INDEX mark on the tape whenever a recording is initiated.

Index Search

Press INDEX 7 or 6 during stop or play mode.

For Succeeding programs: Press INDEX 7 .

For Preceding programs: Press INDEX 6 .

(Additional press increases the INDEX NO. up to 9.)

When the INDEX 7 or 6 is pressed, the unit starts searching the INDEX NO. selected and finds the portion, then playback starts automatically.

To stop the Index Search, press STOP .

•

NOTES:

When you record an INDEX mark at the very beginning of the tape, the mark may not be found.

During INDEX search, the tape may stop and begin to play at a slightly different location.

INDEX may not function properly with old or worn out video tapes.

INDEX marks may not be found if it is extremely close to the point where the search began.

In recording, if you stop recording temporarily, the INDEX mark is not recorded on the tape.

18

2F3PJ01A[E](18-23) 18 11/1/05, 16:57

Recording a TV program

Recording and viewing the same TV program.

Load a cassette tape with the erase prevention tab intact.

The unit will automatically turn on.

Press SPEED to select the desired tape speed SP or

SLP.

The tape counter and SP or SLP will appear on the screen for about 4 seconds.

Set the TV/CABLE option to the appropriate position

(see page 16).

4 Press Number keys or CH / to select the channel to be recorded.

1-9

10-12

Press 0 twice and then 1-9 as required.

Example: To select 2, Press 002 .

Press 0 first and then the remaining 2 digits in order from left to right.

13-99

Example: Press 012 for “12”.

Press 2 digits in order.

Example: Press 22 for “22”.

100-125 Press the 3 digits in order.

Example: Press 110 for “110”.

VHF/UHF/CABLE CHANNELS

VHF

2-13

UHF

14-69

CABLE

VHF

2-13

STD/HRC/IRC

14-36 (A) (W)

37-59

60-85

86-94

95-99

(AA) (WW)

(AAA) (ZZZ)

(86) (94)

(A-5) (A-1)

100-125 (100) (125)

01 (5A)

Press REC/OTR .

“ ” will appear on the screen for about 4 seconds and “REC” will appear on the display.

INDEX

CH 110

NOTES:

• If the erase prevention tab is removed, the tape will eject when

REC/OTR is pressed for recording.

• If you wish to watch the DVD playback during the normal recording on VCR, press VCR/DVD to change to DVD mode and perform the DVD playback (see page 24).

• You can not record disc material in DVD, Audio CD, etc. onto a video tape with this DVD/VCR.

Recording

To stop recording

Press STOP to stop recording.

“ ” will appear on screen for about 4 seconds.

To stop recording temporarily

Press PAUSE/STILL to avoid recording unwanted material.

“ ” will appear on screen for about 4 seconds.

Press again to continue the recording.

•

NOTES:

The pause function will be released after 5 minutes to prevent damage to the tape or the VCR. The VCR will change to the

STOP mode.

You can select a recording channel in the recording pause mode.

Recording one program while watching another

While the VCR is recording, press TV/VCR to select the TV position.

The “VCR” will go off and recording will continue.

Select the TV channel you want to watch by using the TV channel selector.

NOTE:

Some CABLE hookups do not permit viewing one channel while recording another. See page 11.

To Display VCR operation Status

Press DISPLAY . The clock, day of the week and more information will be indicated.

While watching TV

DAY OF THE WEEK

CLOCK

8 : 47 AM MON

STEREO SAP

CH 125

CHANNEL

STEREO AND

SECOND AUDIO

PROGRAM (SAP)

While operating a tape

HI-FI

STEREO

AUTO

REPEAT

8 : 30 AM MON

HI-FI

00 : 00 : 00 SP TAPE

SPEED

REAL TIME COUNTER

00 : 15 : 12 SP

OPERATING

MODE

TAPE IN

To cancel the display: Press DISPLAY until all indicators disappear.

Auto rewind feature

This VCR will automatically rewind the tape when the tape has ended (except during OTR and TIMER REC). It will also eject the tape.

19

2F3PJ01A[E](18-23) 19 11/1/05, 16:57

Recording

One-touch Timer Recording (OTR)

The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording.

Example: One-touch Timer Recording for 30 minutes.

Load a cassette tape with the erase prevention tab intact.

The unit will automatically turn on.

Press SPEED to select the desired tape speed SP or

SLP.

The tape counter and SP or SLP will appear on the screen for about 4 seconds.

Set the TV/CABLE option to the appropriate position.

Press Number keys or CH / to select the channel to be recorded.

5 Press REC/OTR . Press the button again to stop recording after 30 minutes. Each additional press of REC/OTR will increase recording time as shown in the chart below, up to a maximum of 6 hours. The OTR and recording time will appear on the screen for about 4 seconds. And, “REC” will keep blinking in the display.

Press once twice

3 times

4 times

5 times

Recording time Press

NORMAL REC 6 times

0:30

1:00

1:30

2:00

7 times

8 times

9 times

10 times

Recording time

3:00

4:00

5:00

6:00

NORMAL REC

To cancel OTR

Press STOP or turn off the power.

“ ” will appear on screen for about 4 seconds.

NOTE:

If you wish to watch the DVD playback during the OTR, press

VCR/DVD to change to DVD mode and perform the DVD playback (See page 24).

20 Timer recording

Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.

Example: Program a timer recording for the 26th day, channel 125 (CABLE), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP).

Press VCR MENU . Select the “TIMER REC SET” option, then press ENTER .

Press SET + or – to select one of the program line, then press ENTER .

Press SET + or – to select the date, then press

ENTER .

Set the start time , end time , channel and tape speed as in step 3 .

á ñ

DATE START END CH

26(SU) 11:00

11:30

125

SLP

á+/-/ENTER/CANCEL/MENUñ

•

NOTES:

Press CANCEL to move cursor backward for correction.

To record from external source set the channel to “L”. “L” will appear next to CH 125 (or 69).

5 To enter other programs, repeat steps 2 through 4 .

• To return to the normal screen, press VCR MENU twice.

Press TIMER REC . The clock symbol ( ) will appear on the display and the VCR stands by for recording. At the same time, VCR mode will change to DVD mode automatically. You can use DVD even if the VCR is in the Timer recording mode.

If you do not use the DVD, turn the power off.

The timer recording will start at 20 seconds before the time you predetermined.

•

NOTES:

If the clock symbol ( ) does not appear on the display in spite of the pressing of TIMER REC , the cassette may not have been loaded yet. (See page 17)

If the cassette is ejected in spite of the pressing of TIMER

REC , the erase prevention tab of the cassette may have been removed. (See page 17)

•

NOTES:

If the clock symbol ( ) blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape supply. Press TIMER REC to cancel the timer program or press EJECT to remove the cassette tape.

During timer recording standby mode, the VCR mode cannot be selected. To use the VCR, press TIMER REC at first, then press VCR/DVD to change to VCR mode. After you use the VCR, press TIMER REC again to put the VCR into timer recording standby mode.

If you press TIMER REC during timer recording, the recording operation will be interrupted. If you press TIMER REC again within the programmed time, the recording operation will start again.

After a 30 minute power failure or disconnection of the power plug, all programmed recording settings and time display will be lost upon resumption of power. In this case, reset the clock (See page 15) and reprogram any timer recordings.

2F3PJ01A[E](18-23) 20 11/1/05, 16:58

Timer recording special case

Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-SA:

Monday to Saturday) Timer recording .

Follow the procedure of timer recording on the previous page.

At picture 3 press SET + or – repeatedly until the desired setting appears. Then press ENTER .

When you press SET – repeatedly, the indicator at DATE will change as follows, in this case the day is Friday.

The current day (Friday)

One month later minus one day

WKL-WE

(Weekly Wednesday)

In case Timer programs-overlap

Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below.

Program 1

Program 2

Program 3

Recording

Control Settings

8 : 00

SU-SA (Sunday to Saturday)

MO-SA (Monday to Saturday)

MO-FR (Monday to Friday)

WKL-TH (Weekly Thursday)

á ñ

9 : 00 10 : 00 11 : 00

Prog.1

Deleted Parts

Non Recorded Portion Parts

Prog.2

Prog.3

Recording

Confirmation / Cancellation of the Timer recording

If the Timer has been activated, press TIMER REC to deactivate the Timer. The clock symbol ( ) will disappear. Then press VCR/DVD to change to VCR mode.

2 To confirm Timer program:

At picture 1 on the previous page select the “TIMER REC

SET” option and press

ENTER .

Then the timer program list as right will appear on the screen.

DATE START END CH

26(SU) 11:00 PM 11:30 PM 125 SLP

á+/-/ENTER/CANCEL/MENUñ

3 To cancel Timer program:

Press SET + or – to select the unnecessary program, then press CANCEL to cancel the program.

DATE START END CH

á+/-/ENTER/CANCEL/MENUñ

Press VCR MENU repeatedly until the TV-picture appears.

NOTES:

• If there are other timer record programs remaining, TIMER

REC must be pressed to reactivate the timer, otherwise the remaining timer record programs will be ignored.

• You cannot confirm the Timer program during timer recording operation.

• You can also correct the programmed setting in program confirm mode.

At step 2 above, press ENTER to enter the program input mode. Then press ENTER repeatedly until the item you wish to correct blinks. Then correct the data with SET + or – .

Then press VCR MENU repeatedly until the TV-picture appears.

DATE START END CH

26(SU) 11:00 PM 11:30 PM 125 SLP

– – – – – – – : – –

– – – – – –

– : – –

– – – – – – – : – –

– : – – – – –

– : – –

– – –

–

+/–/ENTER/CANCEL/MENU

•

NOTES:

The daily/weekly recording can be made continuously until the recording is canceled or the tape reaches the end.

During timer recording the automatic rewinding mechanism does not function.

21

2F3PJ01A[E](18-23) 21 11/1/05, 16:58

Advanced function of VCR section

Stereo recording and playback

The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts.

When a MTS STEREO broadcast is received, the word

“STEREO” will appear on the screen and the program can be viewed or recorded in stereo.

STEREO

The Hi-Fi STEREO recording procedure is the same as for normal recordings.

NOTE:

When using a CABLE system, stereo TV programs may be transmitted over a mono cable channel. In this case the word

“STEREO” will not appear and the sound will be in mono.

Output selection

When viewing an MTS STEREO TV program, or playing a prerecorded VHS Hi-Fi STEREO videotape, press AUDIO

SELECT to select how the audio will be heard through the speakers. Normally set to the Hi-Fi STEREO position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The “R” and

“L” positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program.

Each time when you press the button, output selection display appears on the screen for several seconds. Refer to the chart below.

OUTPUT

SELECTION

STEREO

L ch

R ch

MONO

SOUND HEARD ON BOTH

SPEAKERS

STEREO

LEFT CHANNEL AUDIO

RIGHT CHANNEL AUDIO

MONO

Duplicating a video tape

If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape.

Make all connections before turning on the power.

Load a blank cassette tape with the erase prevention tab intact into the recording VCR.

Load a previously recorded tape into the playback VCR or CAMCORDER.

Press SPEED to select the desired tape speed SP or SLP.

It is recommended that you set the Speed to the SP mode on the recording VCR for best results.

Press INPUT SELECT to select

AUDIO/VIDEO input position. “L” will appear in the display.

Press REC/OTR on the recording VCR, then press

PAUSE/STILL .

Press the PLAY button on the playback VCR or

CAMCORDER, then press the PAUSE/STILL button.

Release the recording pause and the playback still simultaneously to begin the duplicating process.

Connection with second Video recorder

Playback VCR

To VIDEO OUT To AUDIO (R) OUT

To AUDIO (L) OUT

AUDIO/VIDEO Cord (supplied)

Recording VCR

Second Audio Program (SAP)

Your VCR is fitted with a SAP broadcast system which enables you to switch to a second audio program when viewing a selected channel.

This function applies only when the program is broadcast in multi-languages through the SAP broadcast system.

Press VCR MENU . Then press SET + or – to select

“SAP”.

Then press ENTER to select “ON”.

Then press VCR MENU until the menu screen is cleared.

Listening to SAP

When the VCR is turned on or a channel selection is made, make certain the letters “SAP” appears on the screen. This means that the “Second Audio Program” broadcasting is available.

•

NOTES:

When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural.

When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cord not connected), the sound will be monaural.

22

To VIDEO IN To AUDIO (R) IN

To AUDIO (L) IN

Connection with Video camera

Playback Camcorder

To VIDEO IN

Recording VCR

To AV Jack

To AUDIO (R) IN

To AUDIO (L) IN

AUDIO/VIDEO Cord (not supplied)

For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.

2F3PJ01A[E](18-23) 22 11/1/05, 16:58

Disc

This unit applies to DVD discs from Region 1 or Region ALL.

The loaded Disc (DVD, Audio-CD and MP3-CD) will be recognized automatically.

The suitable Disc-formats are: DVD, CD-R and CD-RW.

Some CD-R/RW discs may be incompatible.

Do not play DVD-ROM, DVD-Audio, CDV, Video-CD, CD-G or

Photo CD to prevent accidental erasure of prerecorded material.

This unit cannot record disc material in DVD, Audio CD etc.

onto a video tape.

If you press REC/OTR during DVD playback, a symbol mark

“ ” will appear on the screen for approx. 4 seconds.

Title

When two or more movies are recorded on a disc, the disc is divided into two or more sections. Each section is called a

“TITLE”.

Chapter

The titles can be subdivided into many sections.

Each section is called a “CHAPTER”.

Track

An Audio CD can contain several items.

These are assigned to the tracks.

DVD DISC

TITLE 1 TITLE 2

CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2 CHAPTER 3

Disc playback operation

Setting setup language

The setup language can be selected.

Press VCR/DVD to select the DVD mode (The

DVD indicator will light).

“No Disc” will appear on the screen (If a DVD disc has already loaded, the playback will start automatically).

No disc

Press SETUP in the stop mode. The SETUP

MENU of DVD will appear on the screen.

3 Press or to select option, then press or ENTER .

/Enter/Setup/Return

Subtitle

Audio

OSD

/Setup/Return

English

TRACK 1 TRACK 2 TRACK 3

Removing Disc from Case

Be sure to hold the edge of disc. Do not touch the surface of the disc.

Pick up the disc gently from the case.

• Do not scratch the disc.

• Do not get dirt on the surface of the disc.

• Do not stick a label or adhesive tape on the disc.

• Do not drop or bend the disc.

Storing Disc

• Store the disc in the case to avoid risk of scratches, dirt or damage.

• Do not leave disc exposed to direct sunlight or in hot or humid places.

Cleaning Disc

Wipe the disc with a clean, dry cloth from center to edge.

• Do not wipe the disc round.

• Do not use liquid or aerosol cleaners.

TRACK 4 TRACK 5

Press or to select

“OSD”, then press or

to select desired language (e.g. English).

Subtitle

Audio

OSD

/Setup/Return

English

To make the SETUP screen disappear, press SETUP (or

RETURN ).

If the DVD/VCR does not operate properly: Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again.

23

2F3PJ01A[E](18-23) 23 11/1/05, 16:58

Disc playback operation

Playback procedure

Press OPEN/CLOSE .

The disc tray will open.

Place a disc onto the tray.

Hold the disc, position it with the printed label side up, align it with the guides, and place it in its proper position.

3 Press PLAY or OPEN/CLOSE .

The disc tray closes automatically.

On the screen, “ ” changes to “Reading” and then playback will commence.

• A menu screen may appear on the TV screen, if the disc has a menu feature. In this case, press , ,

, or ENTER to operate a menu feature.

Press STOP to end playback.

• The DVD/VCR memorizes the stopped point, depending on the disc. “ ” appears on the screen. Press PLAY to resume playback (from the scene point).

• If you press STOP again (“ ” appears on the screen) or unload the disc, the DVD/VCR will clear the stopped point.

5 Then press OPEN/CLOSE .

The disc tray opens.

Remove the disc and press POWER .

The disc tray closes automatically and DVD/VCR turns off.

NOTES:

• If a non-compatible disc is loaded, “Incorrect Disc”, “Region

Code Error” or “Parental Error” will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (see pages 23 and 28).

• Some discs may take a minute or so to start playback.

• A “Prohibition” symbol “ ” may appear at the upper left of the screen. This symbol means either the feature you tried is not available on the disc, or the DVD/VCR can not access the feature at this time. This does not indicate a problem with the DVD/VCR.

• When you set a single-faced disc label downwards (i.e. the wrong way up) and press PLAY or OPEN/CLOSE , “Reading” will appear and remain on the screen for approx. 40 seconds and then it will change to “Incorrect Disc”.

• Some playback operations of DVDs may be intentionally fixed by software producers. Since this DVD/VCR plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

• When playing DTS-encoded Audio CDs, excessive noise will be heard from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the

DVD/VCR are connected to an amplification system.

24 Special playback

There may be a slight delay between pressing the button and the function activation.

Fast Forward Playback

Press F.FWD

during normal playback.

Each press of F.FWD

will increase the speed of the search

(x2), (x4), (x8), (x20).

• To resume normal playback, press PLAY .

Review Playback

Press REW during normal playback.

Each press of REW will increase the speed of the search

(x2), (x4), (x8), (x20).

• To resume normal playback, press PLAY .

Still Playback

Press PAUSE/STILL during normal playback.

• To resume normal playback, press PLAY .

Frame Advance

Press PAUSE/STILL during still playback.

One frame is advanced each time you press PAUSE/STILL .

• To resume normal playback, press PLAY .

Slow-motion Playback

Press SLOW during normal playback or still playback.

Each press of SLOW will change the speed of the slow x1/2, x1/4, x1/6, x1/7.

• To resume normal playback, press PLAY .

• To resume the still playback, press PAUSE/STILL .

Locating a chapter or track

Press SKIP ( 7 ) Forward or SKIP ( 6 ) Reverse during playback to locate a chapter that you want to watch.

Each time you press the button, a chapter or track is skipped.

NOTE:

The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent damage to your television screen. Projection televisions are very susceptible.

Zooming

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

Press ZOOM during playback.

The center part of the image will be zoomed in.

Each press of ZOOM will change the ZOOM 1

(x 1.3), 2 (x 1.5) and 3 (x 2.0).

2 Press C / D or B / A to view a different part of the frame.

You may move the frame from the center position to UP,

DOWN, LEFT or RIGHT direction.

In the zoom mode press ZOOM repeatedly to return to a

1:1 view ( Off).

NOTE:

You can use the Pause, Slow, Search or Skip feature in the zoom mode.

2F3PJ01A[E](24-27) 24 11/1/05, 16:58

Locating desired scene

Use the title, chapter and time recorded on the disc to locate the desired point to play back.

To check the title, chapter and time, press DISPLAY . (see page 30)

1 Press JUMP during playback or stop mode.

Press or to select the “Time”, “Title” or

“Chapter”.

Time

Title /6

Chapter /

/Enter/0 9/Cancel/Jump

Press Number keys to change the number.

• If you input a wrong number, press CANCEL .

• Refer to the package supplied with the disc to check the numbers.

Press ENTER .

Playback starts.

• When you change the title, playback starts from

Chapter 1 of the selected title.

• Some discs may not work in the above operation.

Marking desired scenes

The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene.

Marking the scenes

Press MARKER during playback.

Select the blank Marker using / .

Marker 1

Marker 2

Marker 3

/Enter/Cancel/Marker

Then press ENTER at the desired scene.

• Repeat this procedure to set the other 2 scenes.

Press MARKER to remove this display.

Returning to the scenes

1 Press MARKER during playback or stop mode.

Press / to select the Marker 1-3.

Marker 1

Marker 2

Marker 3

/Enter/Cancel/Marker

Press ENTER .

Playback starts from the marked scene.

To cancel the mark

1 Press MARKER .

Press / to select the Marker 1-3.

Press CANCEL .

To remove this display, press MARKER .

NOTES:

• Some discs may not work with the marking operation.

• The marking is cancelled when you open the disc tray or turn the power off.

• Some subtitles recorded around the marker may fail to appear.

Disc playback operation

Changing soundtrack language

You can select the language when you play a multilingual disc.

Press AUDIO during playback.

The current soundtrack language will appear.

1/8 Eng DolbyDigital

Press AUDIO repeatedly until the desired language is selected.

The on-screen display will disappear after a few seconds.

Subtitles

Turning the subtitles on and off

When playing back a disc recorded with subtitles, you can turn the subtitles on or off.

Press SUBTITLE during playback until “Off” appears.

Off

Changing the subtitle language

You can select the language when playing back a disc recorded with multi-lingual subtitles.

Press SUBTITLE repeatedly during playback until your desired language appears.

The on-screen display will disappear after a few seconds.

1/32 Eng

NOTES:

• If the desired language is not heard after pressing the button several times, the language is not recorded on the disc.

• Depending on the DVD you may be unable to turn on, turn off, or change the subtitles, even if they are recorded on the disc. While playing the DVD, the subtitle may change while opening or closing the disc tray, or while changing the title.

• In some cases, the subtitle language is not changed to the selected one immediately.

25

2F3PJ01A[E](24-27) 25 11/1/05, 16:58

Disc playback operation

Changing angles

When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.

Press ANGLE during playback.

The current angle will appear.

1/9

Press or to select “Chapter” or “Title”.

In case of CD, at first press to select “Repeat” and then press or to select “Track” or “All”.

DVD Audio-CD

Repeat

/Play Mode

: Chapter Play Mode :

Repeat :

/Play Mode

Off

All

Press ANGLE repeatedly until the desired angle is selected.

NOTE:

Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the disc.

Title selection

Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.

Press TOP MENU during playback.

Title menu appears on the screen.

• Press TOP MENU again to resume playback at the scene when you pressed TOP MENU .

Press / or / to select the desired title.

Press ENTER or PLAY .

The playback of the selected title will start.

DVD menu

Some DVDs allow you to select the disc contents using the menu. When you play back these DVDs, you can select the subtitle language and soundtrack language, etc. using the DVD menu.

Press DVD MENU during playback.

The DVD menu appears on the screen.

• Press DVD MENU again to resume playback at the scene when you pressed DVD MENU .

Press / or / to select the desired item.

Press ENTER . The menu continues to another screen.

Repeat steps 2 and 3 to set the item completely.

NOTE:

Depending on the DVD, you may be unable to select the title, and a “title menu” may simply be called a “menu” or

“title” in the instructions supplied with the disc.

Repeat playback

Title, Chapter, Track Playback

Press PLAY MODE during playback or stop mode.

DVD Audio-CD

26

Repeat

/Play Mode

: Off Play Mode

Repeat :

/Play Mode

Off

Press PLAY MODE again to make the screen disappear.

•

Press PLAY to start Repeat playback.

To resume normal playback, select Repeat “Off”.

A-B Repeat Playback

A-B repeat playback allows you to repeat material between two selected points.

Press REPEAT A-B during playback.

The start point is selected.

Press REPEAT A-B again.

A B

The end point is selected.

Playback starts at the point that you selected.

Playback stops at the end point, returns to Point A automatically, then starts again.

To resume normal playback press REPEAT A-B again.

“ Off ” appears on the screen.

NOTES:

• Some discs may not work with the repeat operation.

• In A-B repeat mode, subtitles near point A or B may not appear.

• During the A-B Repeat Playback the ANGLE feature will not operate.

• You may not be able to set A-B Repeat, depending on the scenes of the DVD.

• A-B repeat does not work with an interactive DVD and MP3-CD.

Program playback (CD)

You can arrange the order of tracks on the disc.

Press PLAY MODE in the stop mode.

Play Mode :

Repeat :

/Play Mode

Off

2 Press or repeatedly until the program table shown at right appears.

3 Example: In case you wish to program in order of 7, 3, 11:

Enter as 7 , 3 , 11 .

If you input a wrong number, press CANCEL .

"#$!" "$"

4 Press / or / to select “Program

Program Playback

Playback” and press

ENTER . “Program Playback” will appear on the screen.

The program you selected will begin to playback in the order set. To return to normal playback, select “Play

Mode: Off” at step 2 above.

2F3PJ01A[E](24-27) 26 11/1/05, 16:58

Random playback (CD)

Press PLAY MODE in the stop mode.

Press / to select

“Random”.

Play Mode :

Repeat :

/Enter/Play Mode

Random

Off

Press PLAY .

“Random Play” will appear on the screen and Random

Playback will start.

NOTES:

• To cancel program play, select “Clear” at step 4 and press

ENTER .

• The program is cancelled when you open the disc tray or turn the power off.

• Random playback can not be combined with Repeat playback.

MP3 playback

This player can play back the MP3-data which has been recorded on CD-R or CD-RW. To produce the MP3-data, you need a Windows-PC with CD-ROM drive and a MP3encoding Software (not supplied).

The Apple-HFS-System can not be played.

MP3 CD Information

Limitations on MP3 CD playback

• MP3 CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, “mp3”.

• The directory and file names of the MP3 CD must correspond to the ISO standardized files.

• This unit can read 999 files per disc. If one directory has more than 999 files, it reads up to 999 files, the remaining files will be omitted.

• As for multi-session disc, only the first session can be played.

• If the CD has both audio tracks and MP3 files, only audio tracks are played.

• It may take more than one minute for this unit to read MP3 files depending on its structure.

• Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 10 letters) on the screen. Long file names will be condensed.

• The music files recorded by “Hierarchical File System” (HFS) cannot be played.

Limitations on display

• The maximum number for display is 10 letters. Available letters for display are the following: capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).

• Other characters than those above are replaced by a hyphen.

Notes on MP3 files

To play back MP3 CD in the recorded order,

1. Use MP3 software that records data alphabetically or numerically.

2. Name each file including two-digit or three-digit number (e.g.

“01” “02” or “001” “002”).

3. Refrain from making too many sub-folders.

CAUTION:

• Some MP3 CDs can not be played back depending on the recording conditions.

• The CD-R/RW that has no music data or non-MP3 files can not be played back.

Disc playback operation

Press OPEN/CLOSE .

The disc tray will open.

Place a disc onto the tray.

2 Press PLAY or OPEN/CLOSE . The disc tray closes automatically. On the TV-screen, “Reading” will appear. Reading will take as much time as the number of file.

3 A MP3 menu screen will appear on the TV screen.

Press / or ENTER to select folder.

-/72 --:--

Pops

Japan

Bay Bridge

CLOSE MY EYES 10

9 flower

Lies and Truthwinter fall

DIVE TO BLUE Rain

5 Honey 12 Strawberry

6 BLUE EYES 13 Welcome party

7 Blurry Eyes 14 Thailand

/0-9/Enter/Play Mode

Press / or / or Number keys to select the desired track, then press ENTER . Track is selected and play commences.

• In case the folder includes more than 15 tracks, press

or to display next track list.

-/72 --:--

Pops

Japan

Bay Bridge

CLOSE MY EYES 10

9 flower

Lies and Truthwinter fall

DIVE TO BLUE Rain

5 Honey 12 Strawberry

6 BLUE EYES 13 Welcome party

7 Blurry Eyes 14 Thailand

/0-9/Enter/Play Mode

Pops

Mother

Hold Your Last

-/72 --:--

/0-9/Enter/Play Mode

5 Press STOP to end playback.

• The unit records the stopped point. “ ” appears on the screen. Press PLAY to resume playback (from the scene point).

• If you press STOP again or unload the disc, the unit will clear the stopped point.

6 Then press OPEN/CLOSE .

The disc tray opens.

Remove the disc and press POWER .

The disc tray closes automatically and DVD/VCR turns off.

NOTES:

• During MP3-Playback, you can not use SEARCH, A-B Repeat functions.

• You can use Repeat (Track or All), Random functions and

Program playback for MP3 CD Playback.

27

2F3PJ01A[E](24-27) 27 11/1/05, 16:58

Advanced function of DVD section

Parental control

Some discs are specified not suitable for children. Such discs can be prevented from play back with the unit.

Parental control setting

Press SETUP in the stop mode.

Press or to select option.

Then press or ENTER .

Password

Parental

Output

----

Off

Interlace

/0-9/Enter/Cancel/Setup/Return

2 Press once to select “Parental Off”, then press or until the level you desire appears (e.g.: 1).

Press once to select “Password ”.

Then press Number keys to input a 4-digit password

(e.g.: 1234).

• If you input a wrong number, press CANCEL .

• Be sure to remember this number!

Level Off : The parental control setting does not function.

Level 1

Level 8

: DVD software for adults cannot be played back.

: All DVD software can be played back.

Select from level 1 to level 8.

On a scale of 1-8, “1” is the most restrictive.

Press ENTER .

1234 change to .

To make SETUP screen disappear, press SETUP .

Temporary disabling of rating level by DVD disc

Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set.

It is up to you to decide whether to cancel the rating level or not.

Load a DVD disc and press PLAY or OPEN/CLOSE (see page 24).

2 If the DVD disc has been designed to temporarily cancel the

Your disc exceeds the parental control level 1.

Rating level, the screen which follows the

“Reading” screen will change, depending on which disc is played. If

Parental Control Level

Cancel Picture

/Enter/Return you select “YES” with

ENTER key, “Your disc exceeds the parental control level

1.” (e.g.) screen will then appear.

If you wish to cancel the set rating level temporarily, select “Parental Control Level” with or , then press ENTER . If the 4-digits password at step 3 on left column has been set, the password entering screen will appear as shown in step 4 below.

Alternatively, if the password has not been set, playback will commence. If you don’t know (or have forgotten) the password, select “Cancel Picture”.

The setting screen will disappear. Press OPEN/CLOSE to remove the disc.

4 Enter the password with Number keys .

Then press ENTER .

Please enter the

4 digit password

To unlock the Parental control setting

Cancel the password so as to set the Parental level freely again,

Select “Password

(step 2 ) and press Number keys to input your 4-digit password.

Then press ENTER .

”

Password

Parental

Output

1234

Interlace

/0-9/Enter/Cancel/Setup/Return

If the input password was right, will appear.

You can move to “Parental 1” (e.g.) to input the desired level or to cancel parental control.

NOTES:

• If each setup (pages 23, 28 ~ 30) has been completed, the unit can always be worked under the same conditions (especially with DVD discs).

Each setup will be retained in the memory if you turn the power off.

• Depending on the discs, the unit cannot limit playback.

• Some discs may not be encoded with specific rating level information though its disc jacket says “adult”. For those discs, the age restriction will not work.

• Do not forget the password. If you forget the password, contact customer service.

If you interrupt the entering, press

RETURN .

Enter/0 9/Cancel/Return

5 Playback will commence if the entered password was correct.

NOTE:

This temporary cancellation of rating level will be kept until the disc is ejected.

When the disc is ejected, the original rating level will be set again automatically.

28

2F3PJ01A[E](28-BACK) 28 11/1/05, 16:58

Setting language

You can select the language of the disc menu messages of DVDs.

1 Press SETUP in the stop mode.

Press or to select option.

Press or ENTER , then press or to select desired option.

3 Press or to select your desired language.

Subtitle

Audio

OSD

/Setup/Return

English

Advanced function of DVD section

Setting the aspect ratio of TV screen

You can select the aspect ratio for your TV.

1 Press SETUP in the stop mode.

Press or to select option.

2 Press or ENTER , then press or to select “Tv Screen”.

3 Press or to select your desired screen type.

Tv Screen

Display

Picture Mode

4:3

Auto

/Setup/Return

You have the following screen sizes to choose from:

4:3 Letter box

Select this mode when connecting to a conventional TV.

When playing back a wide screen-DVD disc, it displays the wide picture with black bands at the top and bottom of screen.

English, Francais, Espanol:

The selected language will be heard or seen.

Other:

Other language can be selected (see the “Language code list” on page 31).

Off: (Subtitle)

Subtitles do not appear.

Original: (Audio)

The unit will select the first priority language of each disc.

To make SETUP screen disappear, press SETUP .

NOTE:

If the selected language is not recorded on the disc, the firstpriority language is selected.

4:3 Pan Scan

It displays the wide picture on the whole screen with left and right edges automatically cut off.

16:9 Wide

Select this mode when connecting to a wide-screen TV.

A wide screen picture is displayed full size.

To make SETUP screen disappear, press SETUP .

NOTE:

If the DVD disc is not formatted in the pan & scan style, it displays 4:3 style.

Setting the picture mode

The image of smoother motion can be obtained by setting Picture Mode to Film when you view a DVD from the DVD player connected with the component input.

1 Press SETUP in the stop mode.

Press or to select option.

Press or ENTER , then press or to select

“Picture Mode”.

Press or to select your desired picture mode.

Tv Screen

Display

Picture Mode

4:3

Auto

/Setup/Return

Auto: The unit recognizes the picture source (film or video) of the current disc according to the disc information.

29

2F3PJ01A[E](28-BACK) 29 11/1/05, 16:58

Advanced function of DVD section

Setting on screen display

On screen display can be switched on or off when you press the DISPLAY button.

1

Press SETUP in the stop mode.

Press or to select

2

Press or ENTER , then press or to select

“Display”.

option.

Tv Screen

Display

Picture Mode

4:3

Auto

3

Press or to select

“On” or “Off”.

/Setup/Return

On: On screen displays appear when you press any buttons (factory setting).

Off: On screen displays do not appear when you press any buttons except SETUP , SEARCH MODE ,

PLAY MODE , MARKER and DISPLAY .

4

To make SETUP screen disappear, press SETUP .

Status display of disc

Each press of DISPLAY , the status display of the disc will appear on the screen and change as follows.

DVD

00:34:56 01:12:33

Title

1/8

1/32

1/99

00:34:56 01:12:33

Chapter 1/999

Eng DolbyDigital

1/9

Eng

To make status display disappear, press DISPLAY again.

AUDIO CD

34:56 71:33

Track 11/99

Progressive scan

The unit supports the Progressive scanning system as well as the conventional interlaced scanning system.

If your TV is equipped with component jacks which support the progressive video input, you can enjoy high quality picture by making the Progressive scanning mode active.

1

Press PROGRESSIVE in the stop mode.

The PROGRESSIVE indicator “ ” on the display window will light.

2

Press PLAY to start playback.

• To make the progressive scanning mode inactive, press

PROGRESSIVE in the stop mode.

The PROGRESSIVE indicator “ ” on the display window will go off.

NOTE:

You also can change the scanning mode by selecting Output in the option.

Password

Parental

Output

----

Off

Interlace Interlace

Progressive

/Enter/Setup/Return

When you playback the CD disc, the status display will appear on the screen and continue displaying.

Dynamic Range Control

DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment.

1

Press SETUP in the stop mode.

Press or to select option.

2

3

Press or ENTER to select “DRC”.

DRC Off

Press or to select desired setting.

On:

Loud sound such as explo-

/Setup/Return sion or similar is toned down slightly when played back. This makes it suitable for when it is connected to a stereo.

Off:

It plays back at the recording level on the disc.

NOTES:

• This function works only during playback of Dolby Digital recorded discs.

• The level of Dynamic Range Reduction may differ depending on DVD video disc.

About PROGRESSIVE SCANNING MODE

To display video on the TV screen, the conventional scanning method is called “Interlaced scanning.” With this method, only half of the horizontal lines are displayed at a time. So two fields complete a single picture (frame); i.e., the first field, containing all the odd-numbered lines, is displayed followed by the second field, containing all the even-numbered lines.

The Progressive scanning system scans all horizontal lines at a time, so you can double the number of lines compared with the interlaced scanning, resulting in a highdensity, flicker-free picture.

To enjoy a progressive scanned video, the TV connected to the unit must have Progressive inputs.

Depending on the material source format, DVD discs can be classified into two categories; film and video (note that some DVD discs contain both a film source and a video source). Film sources are recorded as 24-frame-persecond information, while (NTSC) video sources are recorded as 30-frame-per second (60-field-per-second interlaced) information.

When the unit plays back a film source material, uninterlaced progressive output signals are created using the original information. When a video source material is played back, the unit interleaves lines between the interlaced lines on each to create the interpolated picture and outputs as the progressive signal.

NOTES:

• Some discs may not be played back with the progressive scanning mode correctly because of the disc characteristics or recording condition.

• There are some progressive TV and High-Definition TV sets that are not fully compatible with the unit, resulting in the unnatural picture when playing back a DVD disc in the Progressive scanning mode. In such a case, use the Interlaced scanning mode.

• You cannot make the progressive scanning mode active in following cases.

– The unit is in the VCR mode.

– The disc is played back in the DVD mode.

2F3PJ01A[E](28-BACK) 30 11/2/05, 11:47 AM

Language code list

Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 29).

Language Name Code Language Name Code Language Name Code Language Name Code

Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919

Afar

Afrikaans

Albanian

Amharic

1111

1116

2927

1123

Finnish

French

Frisian

Galician

1619 Lithuanian

1628 Macedonian 2321 Slovenian

1635 Malagasy

1722 Malay

2230 Slovak

2317

2329

Somali

Spanish

2921

2922

2925

1529

Arabic

Armenian

Assamese

1128 Georgian

1835 German

1129 Greek

Aymara

Azerbaijani

Bashkir

Basque

1135

1136

1211

1531

Greenlandic

Guarani

Gujarati

Hausa

Bengali; Bangla 1224 Hebrew

2111

1415

1522

1933

Malayalam

Maltese

Maori

2122 Marathi

1724 Moldavian

1731 Mongolian

1811 Nauru

Nepali

2322 Sundanese 2931

2330 Swahili 2933

2319 Swedish

2328 Tagalog

2325 Tajik

2324 Tamil

2411 Tatar

2415 Telugu

2932

3022

3017

3011

3030

3015

Bhutani

Bihari

Breton

Bulgarian

1436 Hindi

1218 Hungarian

1228 Icelandic

1217 Indonesian

Burmese 2335 Interlingua

Byelorussian 1215 Irish

Cambodian 2123 Italian

Catalan

Chinese

Corsican

Croatian

Czech

Danish

Dutch

English

Esperanto

Estonian

Faroese

1311

3618

1325

1828

1329

Japanese

Javanese

Kannada

Kashmiri

Kazakh

1411 Kirghiz

2422 Korean

1524 Kurdish

1525 Laothian

1819 Norwegian

1831 Oriya

1911 Persian

1711 Polish

1930 Portuguese

2011

2033

2124

2129

2121

2135

2125

2131

2225

Quechua

2425 Thai

2528 Tibetan

1929 Panjabi 2611 Tigrinya

1924 Pashto, Pushto 2629 Tonga

1611

2622

2630

Turkish

Turkmen

Twi

2731 Ukrainian

Rhaeto-Romance 2823

Romanian

Russian

Samoan

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian 2918

1530 Latin 2211 Shona

1625 Latvian, Lettish 2232 Sindhi

2825

2923

2911

1714

2928

2924

2914

Urdu

Uzbek

3121

3128

3136

2831 Vietnamese 3219

Volapük

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

3225

1335

3325

3418

2019

3525

3631

3018

1225

3019

3025

3028

3021

3033

31

2F3PJ01A[E](28-BACK) 31 11/1/05, 16:58

Problems and troubleshooting

Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist.

Be sure all connections are properly made when using with other units.

DVD/VCR

SYMPTOMS POSSIBLE SOLUTIONS PAGE

DVD/VCR does not operate.

No picture.

No sound.

The remote control does not function.

No CABLE reception.

Playback doesn’t start.

• Make sure the power cord is plugged in.

• Try another AC outlet.

• Power is off, check fuse or circuit breaker.

• Unplug unit, then plug it back in.

• Select the DVD or VCR mode before operating.

• Antenna connection is not correct or antenna cable is disconnected.

• Check the unit is connected correctly.

• The video channel is not in the correct position or the TV is not set to the video channel 3 or 4.

• The video input selector of the TV is not set to VIDEO. Set to VIDEO (or equivalent).

• Channel is set to the external mode.

• Check the unit is connected correctly.

• Check the input selector of the amplifier is set properly.

• The unit is in the Special playback mode.

–

10,11

10~13

–

10~13

–

18,24

• Aim at the remote control at the remote sensor.

• Operate within Approx. 5 Meters or reduce the light in the room.

• Clear the path of the beam.

• The batteries are weak. Replace the batteries.

• Check the batteries are inserted correctly.

• Check all CABLE connections.

• Station or CABLE system problems, try another station.

VCR

TV recording does not work.

Timer recording does not work.

Noise bars on screen.

• The erase prevention tab of the video cassette is broken off.

• The unit is in the external input mode.

• The time is not set correctly.

• The recording start/end time is not set correctly.

• TIMER REC has not been pressed ( is not lit).

• Tracking adjustment beyond range of automatic tracking circuit. Try

Manual tracking adjustment.

• Video heads are dirty.

• The tape is worn or damaged.

DVD

Display is not shown in your language.

• Select proper language in the menu options.

• No disc is inserted.

• The disc may be dirty. Clean up the disc.

• The unit cannot play DVD-ROMs, etc.

17,19

15,16

–

Stopping playback, search, slowmotion play, repeat play, or program play, etc. cannot be performed.

• Some discs may not do some of the functions.

–

No picture, or the screen is blurred or divided into two parts.

• The progressive scanning mode is active through the unit is connected to a TV via the VIDEO OUT jack.

32

2F3PJ01A[E](28-BACK) 32 11/1/05, 16:58

Problems and troubleshooting / Video head cleaning

SYMPTOMS

No 4:3 (16:9) picture.

No on-screen display.

No surround sound.

The unit or remote operation key is not functioning.

Playback does not start when the title is selected.

Audio soundtrack and/or subtitle language is not changed when you play back a DVD.

No subtitle.

Angle cannot be changed.

appears on the screen.

POSSIBLE SOLUTIONS

• The setup does not match your TV.

• Select Display On.

• The setup does not match your stereo system.

• Turn off the unit and unplug the AC power cord for several minutes, then replug it.

• Check the Parental setup.

• Multilingual language is not recorded on the DVD disc.

• Some discs have no subtitles.

• Subtitles are cleared. Press SUBTITLE.

• Multi-angles are not recorded on the DVD disc.

• The function is prohibited with the unit or the disc.

25,29

PAGE

–

Video head cleaning

Auto head cleaner

Auto Head Cleaning system cleans the video heads automatically when a cassette is inserted or ejected to prevent dirt from accumulating on the heads. However, manual head cleaning signifies that the head is getting dirty and occurs when playing poor quality or damaged tapes. If the heads require cleaning, use a high quality head cleaning system or have them cleaned professionally.

Video head clogging

Good Picture Snowy Picture

The video heads are the means by which the DVD/VCR reads the picture from the tape during playback. In the unlikely event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be determined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely snowy). If this is the case, have the

DVD/VCR checked by qualified service personnel.

NOTES: • DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE REAR COVER.

• Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.

• To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.

FOR CUSTOMER SERVICE,

ADDITIONAL SET-UP OR

OPERATING ASSISTANCE

PLEASE CALL:

1-800-289-0980

TO ORDER ACCESSORY

PARTS OR LITERATURE

PLEASE CALL:

1-888-369-0304

WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READY

OR WRITE TO:

ORION SALES, INC.

3471 N. UNION DR.

OLNEY, ILLINOIS 62450

FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT www.orionsalesinc.com

33

2F3PJ01A[E](28-BACK) 33 11/1/05, 16:58

Specifications

GENERAL

Power supply:

Power consumption:

Weight:

Dimensions:

AC 120V 60Hz

Operation: 18W

Stand by: 2W

7.7 lbs (3.5 kg)

Width : 16-15/16 inches (430 mm)

Height : 3-7/8 inches (99 mm)

Depth : 8-15/16 inches (227 mm)

Inputs/Outputs:

Video:

Audio:

Antenna:

Hi-Fi frequency response:

Hi-Fi dynamic range:

In: 1 Vp-p/75 ohms

Out: 1 Vp-p/75 ohms

In: –8 dBm/50k ohms

Out: –8 dBm/1k ohms

UHF/VHF IN/OUT: 75 ohms coaxial

20Hz to 20,000Hz

More than 90 dB

VCR section

Video head:

Audio track:

Tuner:

RF channel output:

F.FWD/REW Time at 25 ˚ C (77 ˚ F):

4 Rotary Heads

Hi-Fi Sound - 2 Tracks / MONO Sound - 1 Track

181 Channel Freq. Synthesized

VHF 2-13

UHF 14-69

CABLE TV 14-36 (A)-(W)

37-59 (AA)-(WW)

60-85 (AAA)-(ZZZ)

86-94 (86)-(94)

95-99 (A-5)-(A-1)

100-125 (100)-(125)

01 (5A)

Channel 3 or 4, Switchable

F.FWD Time: Approx. 4 minute and 50 seconds

REW Time: Approx. 2 minute and 30 seconds

(with T-120 Cassette Tape)

DVD section

Signal system:

Applicable disc:

Audio characteristics frequency response:

S/N Ratio:

Harmonic distortion:

Wow and flutter:

Dynamic range:

Output:

Pickup:

ACCESSORIES:

NTSC

DVD (12 cm, 8 cm), CD (12 cm, 8 cm)

DVD: 4Hz - 22kHz

CD: 4Hz - 20kHz

90 dB

0.02%

Less than 0.01% Wrms

More than 90 dB

Video : (RCA) 1 Vp-p/75 ohms

Audio : (RCA) –12 dBm/1k ohms

Digital Audio : 0.5 Vp-p/75 ohms

CD : Wavelength: 770 - 800 nm

Maximum output power: 0.7 mW

DVD :Wavelength: 645 - 660 nm

Maximum output power: 0.5 mW

Remote control x 1

75 ohm Coaxial Cable x 1

AUDIO/VIDEO Cable x 1

Designs and specifications are subject to change without notice

34

2F3PJ01A[E](28-BACK) 34 11/1/05, 16:58

limited

WARRANTY

DVD PLAYER / VIDEO CASSETTE RECORDER COMBINATION UNIT

ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of ninety (90) days from date of original purchase in the United States only.

Should service be necessary under this warranty for any reason due to a manufacturing defect or malfunction during the first ninety (90) day period from date of original purchase, ORION will provide carry-in repair service at an ORION authorized Independent Service Center at no charge. In addition, for a period of up to six

(6) months from date of original purchase for video heads and twelve (12) months from date of original purchase for other component parts, if an original part fails due to a manufacturing defect in material or workmanship we will replace the defective part only (EXCLUDING LABOR AFTER INITIAL NINETY (90) DAY WAR-

RANTY PERIOD) provided the defect or malfunction is verified along with dated proof of purchase.

There are ORION Independent Service Centers located throughout the country. For the one nearest you,

DIAL TOLL FREE: 1-800-289-0980 or visit our website at www.orionsalesinc.com. This product is eligible for

CARRY-IN service only. ORION will not be liable for damages incurred during shipment of the unit. If there are no ORION authorized Independent Service Centers in your area please call – 1-888-296-7466 for assistance.

Note: This warranty is void if the product is:

(a) Damaged through negligence, misuse, or accident.

(b) Used in a commercial application or rentals.

(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect warranty repairs to the class of product or by the ORION Factory Service Center.

(d) Damaged because it is improperly connected to the equipment of other manufacturers.

This warranty does not cover: a) Damage to tape cartridge.

b) Cleaning of video heads.

c) Damage to DVD and CD discs.

d) Damage to equipment not properly connected to the product.

e) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or

ORION Factory Service Center.

f) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow operating instructions provided with the product.

g) Ordinary adjustments to the product, which can be performed by customer as outlined in the owner's manual.

THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER

AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED

WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A

PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGI-

NAL PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY

TO THIS PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PROD-

UCT FOR ANY PARTICULAR PURPOSE AND USE.

UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH

THE USE OF THIS PRODUCT.

THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES

YOU SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM

STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLU-

SION OF CONSEQUENTIAL DAMAGE; THEREFORE, THESE RESTRICTIONS MAY NOT APPLY TO YOU.

ORION SALES, INC.

3471 N. UNION DR.

OLNEY, ILLINOIS 62450

35

2F3PJ01A[E](28-BACK) 35 11/1/05, 16:58

J2F3PJ01A SH 05/11 N

2F3PJ01A[E](28-BACK) 36 11/1/05, 16:58

Printed in Thailand

Key features

DVD/CD player/VCR combo
Hi-Fi Video cassette recorder
DVD Audio output
Progressive scan
Parental control
One-touch Timer Recording

Frequently asked questions

The model number is VRDVD4100BA.

Press and hold 3 or 4 on the remote control for 3 seconds in the standby mode to select CH 3 or 4. The selected channel number will flash on the display for about 4 seconds. Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 1. Press POWER to turn on the DVD/VCR. Press VCR/DVD to select the VCR mode. The VCR indicator on the front panel will light. Press TV/VCR to select the VCR position. The VCR indicator will appear in the display. Select any channel to receive a TV station in your area. The channel number will appear on the screen for about 4 seconds.

When shipped from the factory, the TV/CABLE menu option is set to the “CABLE” (Cable TV) mode. If not using CABLE (Cable TV), set this menu option to the “TV” mode.