Nakamichi SoundSpace 9 Stereo Music System Service Manual
Below you will find brief information for SoundSpace 9. The SoundSpace 9 is a stereo music system that features a CD player, AM/FM tuner, and a built-in subwoofer. It has a variety of features, including preset stations, random playback, track search, and repeat functions.
advertisement
Stereo Music System
SoundSpace 9
AM FM
Preset
Random
ST
Memory Repeat
Disc Track Remaining Time
Vol.
Memory No.
Loud.
SS-9 General
i
SS-9 General
GENERAL
1.1. Product Code
D210
Abbreviations for Destinations:
CAN — Canada CH — China
DA — South America
EP — Europe
JPN — Japan
OTR — Other
HK
KR
TW
— Hong Kong
— Korea
— Taiwan
UK — United Kingdom
USA — U.S.A.
AUS — Australia
1.2. System Configuration
The SoundSpace consists of the following units.
●
Main Unit (See pages 1-1, 1-2, ... in this manual)
Controls entire of the System. Mainly consists of the following sections:
• Control section (including the system control microprocessor)
• Tuner section
• Operation panel control section
• CD player section (including the mechanism control microprocessor)-- 3 identical CD player sections (Interchangeable with each other except for the Door Cap Ass'y on which the disc number is written.)
●
Subwoofer
(See pages 2-1, 2-2, ... in this manual)
• Subwoofer
• Power amp. section
• Power supply section
●
Satellite Speakers L/R
(See pages 3-1, 3-2, ... in this manual)
●
Main Remote Control/Sub Remote Control
Speaker L
Subwoofer
• Power Amp.
• Power Supply
Remote Control
(Main) (Sub)
Main Unit
• Tuner
• CD Player x 3
Speaker R
: Floor Stand (Option)
Fig. 1.1 SS-9 System Configuration
●
Floor Stands (Option)
• Floor stand for Main Unit
• Floor stand for Satellite Speakers L/R
1.3. Cautions/Warnings
(1) Product Safety Notice
diagram have critical characteristics.
Use ONLY replacement parts recommended by the manufacturer. It is recommended that the unit be operated from a suitable DC supply or batteries during initial check-out procedures.
(2) Leakage Current Check/Resistance Check
Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis resistance check. If the leakage current exceeds
0.5 milliamp, or if the resistance from chassis to either side of the power cord is less than 240 k ohms, the unit is defective.
WARNING — DO NOT return the unit to the customer until the problem is located and corrected.
(3) Protection of Eyes from Laser Beam
To protect eyes from invisible laser beam during servicing,
DO NOT LOOK AT THE LASER BEAM on the Changer.
(4) Laser Caution
CAUTION
Adjusting the knobs, switches, and controls, etc. or taking actions not specified herein may result in a harmful emission of laser beams. This CD Player must be adjusted and repaired only by qualified service personnel.
OBSERVERA!
Sådana inställningar av rattarna, omkopplarna eller övriga kontrollknappar som inte är beskriva i bruksanvisningen kan resultera i farlig laserutstrålning. Justering eller reparation av denna kompaktskivspelare skall endast utföras av kvalificerad servicepersonal.
OBS!
Indstilling af knapper, cmskiftere og øvrige kontrolknapper, som ikke følger den i brugsanvisningen beskrevne måde, kan resultere i farlig laserudstråling. Justering eller reparation af denno CD-afspiller må kun udføres af kvalificeret servicepersonale.
OBS!
Justering av ratt, brytere og kontroller andre enn de som er beskrevet her, kan resultere i farlig laserbestråling. Justering eller reparasjon av denne kompaktdiskspilleren ma bare utføres av kvalifiserte fagfolk.
HUOMAUTUS
Jos nuppeja, kytkimiä ja säätimiä ym, säädetään tai laitetta käytetään toisella tavalla kuin on selostettu, tuloksena saattaa olla vaarallista lasersäteiden vuotoa. CD-soittimen säätö ja korjaus on jätettävä aina asiantuntevan huoltoteknikon tehtäväksi.
ii
SS-9 General
ADVERSEL: USYNLIG LASERSTRÅLING VED ÅBNING.
UNDGÅ UDSAETTELSE FOR STRÅLING.
VARO!: AVATTAESSA OLET ALTTIINA
NÄKYMÄTTÖMÄLLE LAS-
ERSÄTEILYLLE.
ÄLÄ KATSO SÄTEESEEN.
VARNING — OSYNLIG LASERSTRÅLNING NAR
DENNA DEL ÄR ÖPPNAD. BETRAKTA
EJ STRÅLEN.
CLASS 1
LASER PRODUCT
THIS COMPACT DISC PLAYER IS CLASSIFIED
AS A CLASS 1 LASER PRODUCT.
THE CLASS 1 LASER PRODUCT LABEL IS
LOCATED ON THE REAR EXTERIOR.
1.4. Handling the Laser Pickup
In case of repair or replacement of the Laser Pickup, pay attention to the following handling instructions since the laser diode in the Laser Pickup is not resistant to static electricity.
(1)
Grounding
When you repair a Laser Pickup, first ground the human body, as well as the measuring instruments and other tools (with particular caution to soldering iron).
What's more, your workbench and floor should desirably be grounded using conductive sheet or copper plate. See Fig. 1.2.
NOTE: Be careful so as not to let your clothes touch the Laser Pickup, as static electricity on the clothes will not be released even if your body is grounded.
(NO GOOD)
(2) Discharge of Electricity
Be sure to discharge electricity from objects brought into contact with the Laser Pickup (i.e., soldering iron, tweezers, probes, volt-ohm-meter probes, etc.) before starting work by contacting them with the body chassis. Besides, never touch the Laser Pickup while power is applied.
(3) Soldering Iron to be Used
The soldering iron for use in repair work should be: (1) a ceramic soldering iron, (2) a soldering iron with its metal part grounded, or (3) a soldering iron whose insulation resistance after five minutes of power application is 10 M-ohm or more at 500 VDC. Soldering should be completed promptly, at a soldering iron temperature of 320
°
max (39
W). A soldering iron heated above this temperature can break down the laser diode.
Wrist-strap for Grounding
(GOOD)
1M
Ω
Laser Pickup
1M
Ω
Fig. 1.2 Handling the Laser Pickup
Conductive Sheet or
Copper Plate
iii
1.5. Package Ass’y and Accessory Ass’y
(1) Main Unit
03
02
01
SS-9 General
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
01
02
03
—
—
—
—
—
—
—
—
—
—
—
Schematic
Ref. No.
Part No.
—
Description
Package & Accessory Ass'y
(Main Unit)
Q'ty
0F05628A Carton Box
0F05630A Packing Bottom Center
0F05629A Packing Top Center
0F05631A Accessory Box
0F05689A Soft Sheet D Top A
0F05690A Soft Sheet D Top B
0F05692A Soft Bag Center
0F05693A Soft Bag Stand Top
0B85619A 13P DIN Cable 5m
0B85620A 3P RCA Cable 5m
0B90462A Battery UM4x1
0B90819A FM Indoor Antenna
0B90820A Antenna Adaptor
(JPN, OTR, USA, CAN, DA, TW)
0B91071A Antenna Adapter EP
0D03092B
0D07105A
0D07242A
0D07451A
(UK, AUS, EP, CH, HK, KR)
Poly Bag
Speaker Cable
0D07238A AC Cord UL (USA, CAN)
0D07239A AC Cord EP (EP)
0D07240A AC Cord DA/DU (OTR, DA, TW)
0D07241A AC Cord DM (JPN)
AC Cord BS/HK (UK, HK)
0D07243A AC Cord CH (CH)
0D07244A AC Cord KR (KR)
0D07245A AC Cord SA (AUS)
0D07371B Owner’s Manual Japanese
0D07372B Owner’s Manual English
0D07375A Template
0D07376A Owner’s Manual Korean
0D07450A Owner’s Manual French
Owner’s Manual German
1
0D07452B Owner’s Manual Spanish
0D07453A Owner’s Manual Italian
0D07454A Template Speaker
0D07477A AM Loop Antenna
0F05693A Soft Bag Stand Top
0H08216A CD Single Adaptor (JPN)
0H08749A Cable Holder
0H09008E Stand Holder Cover Center
0H09012A Stand Pole Cover L67
0H09013A Stand Pole Cover L82
0H09031A Base Cover Center DT
0J08862A Pole Cover Cushion
DA05574A Screw Ass’y D210
DG05310A Remote Control Sub Ass’y SS—5
HA08444A Main Remote Ass’y SS9
(Except UK, EP)
HA08447A Main Remote Ass’y RDS SS9 (UK, EP) 1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
3
1
2
1
1
1
1
1
1
Fig. 1.3 Main Unit
iv
(2) Subwoofer and Satellite Speakers
03
04
05
SS-9 General
Schematic
Ref. No.
01
02
03
04
05
—
—
Part No.
—
Description
Package and Accessory Ass’y
(Subwoofer and Satellite Speakers)
Q'ty
0F05694A Carton Box S369
0F05703A Packing Bottom Subwoofer
0F05702A Packing Top Subwoofer
0F05691A Soft Sheet Subwoofer
0F05541A Soft Bag Satellite
DA05647A Screw Ass’y S369
DA05648A Spacer Ass’y S369
1
1
1
1
2
1
1
02
01
Fig. 1.4 Subwoofer and Satellite Speakers
v
SS-9 Main Unit Section
Main Unit Section
Main Unit
AM FM Preset
Random
ST
Memory Repeat
Disc Track Remaining Time
Vol.
Memory No.
Loud.
1-1
SS-9 Main Unit Section
CONTENTS
1.
REMOVAL PROCEDURES ................................................................................................................................1-3
1.1.
Rear Cover ............................................................................................................................................. 1-3
1.2.
Main P.C.B. Ass'y ..................................................................................................................................1-3
1.3.
Mechanism CD Ass'y .............................................................................................................................1-3
1.4.
Front P.C.B. Ass'y ..................................................................................................................................1-4
1.5.
Mechanism Chassis Block/Door Block of the Mechanism CD Ass'y .................................................... 1-4
1.6.
Disc Loading Ass'y .................................................................................................................................1-4
1.7.
CD P.C.B. Ass'y and Traverse Mecha Ass'y .........................................................................................1-5
1.8.
Laser Pickup .......................................................................................................................................... 1-6
1.9.
Sled Motor .............................................................................................................................................. 1-6
2. ELECTRICAL CHECKS ..................................................................................................................................... 1-8
2.1.
Measurement Instruments and Jigs ......................................................................................................1-8
2.2.
Parts Location for Electrical Check ........................................................................................................1-8
2.3.
Electrical checks for CD Player .............................................................................................................1-9
3.
MECHANISM ASS'Y AND PARTS LIST ...........................................................................................................1-11
3.1.
Main Stand Ass'y ................................................................................................................................... 1-11
3.2.
Synthesis (Main Unit) .............................................................................................................................1-12
3.3.
Mechanism CD Ass'y 1/Mechanism CD Ass'y 2 (A01) ......................................................................... 1-14
3.4.
Mechanism Chassis Ass'y (B01) ...........................................................................................................1-16
3.5.
Traverse Mecha Ass'y (B02) ..................................................................................................................1-17
3.6.
Disc Loading Ass'y (B03) .......................................................................................................................1-18
4.
ELECTRICAL PARTS LIST ...............................................................................................................................1-20
4.1. Main P.C.B. Ass'y ...................................................................................................................................... 1-20
4.2. Front P.C.B. Ass'y ..................................................................................................................................... 1-20
4.3. CD P.C.B. Ass'y ........................................................................................................................................ 1-21
4.4. LED P.C.B. Ass'y ...................................................................................................................................... 1-21
4.5. SEN LD1 P.C.B. Ass'y ..............................................................................................................................1-21
4.6. SEN LD2 P.C.B. Ass'y ..............................................................................................................................1-21
4.7. SEN UD P.C.B. Ass'y ................................................................................................................................1-21
5.
IC BLOCK DIAGRAMS ..................................................................................................................................... 1-22
6.
BLOCK DIAGRAM ............................................................................................................................................ 1-33
SPECIFICATIONS (See the end of this manual.)
SCHEMATIC DIAGRAMS AND MOUNTING DIAGRAMS (See the separate volume.)
1-2
SS-9 Main Unit Section
1.
REMOVAL PROCEDURES
NOTE: When parts required lubrication are replaced or reassembled, apply specified lubricant to the parts.
For the parts which require lubrication, refer to 3. "MECHANISM ASS'Y AND PARTS LIST."
1.1. Rear Cover
Refer to Fig. 1.1.
(1) Remove F01 (Main Jack Cover) by pulling it out.
(2) Remove screws F02 (ST3x8 + Binding (Black), 5 pcs.) and F03 (PT3x10 + Trass, 4 pcs.), and detach F04
(Rear Cover) from the main body.
Main P.C.B. Ass'y
Rear Cover
Fig. 1.1
1.2. Main P.C.B. Ass'y
Refer to Fig. 1.2.
(1) Remove the Rear Cover. Refer to item 1.1.
(2) Remove screws F01 (ST3x4 + Binding, 15 pcs.) and
F02 (M2.6x4 + Binding, 2 pcs.), and detach F03.
(3) Remove screws F04 (ST3x5 + Binding, 10 pcs.) and
F05 (ST2.6x4 + Binding, 2 pcs.), and detach F06
(Main P.C.B. Ass'y).
Notes on reassembling:
• Connect the cables #1, #2 and #3 to the connectors #1,
#2 and #3 on the Main P.C.B. Ass'y, respectively.
1.3. Mechanism CD Ass'y
Refer to Fig. 1.3.
(1) Remove the Main P.C.B. Ass'y. Refer to item 1.2.
(2) Remove screws F01 (M3x8 + Binding (2A), 8 pcs.),
F02 (Damper Collar, 8 pcs.) and F03 (Mecha Damper,
8 pcs.).
(3) Lift the Escutcheon and remove F04 (2 pcs.) from F05
(Mechanism CD Ass'y 1-No. 2) and F06 (Mechanism
CD Ass'y 1-No. 3).
Note: The Mechanism CD Ass'y 2-No. 1 can be removed in the same way.
Notes on reassembling:
• When assembling the Mechanism CD Ass'y 1-No. 3, with the Mechanism CD Ass'y 1-No. 2 not assembled yet, pass the cable of the Mechanism CD Ass'y 1-No. 3 over the frame "A". Otherwise, you cannot assemble the
Mechanism CD Ass'y 1-No. 3.
• Pass the cables of each Mechanism CD Ass'y through the holes "B" and "C" as shown in Fig. 1.3. For Mechanism CD Ass'y 1-No. 2/No.3, extend their cables approx.
10 cm.
A
Escutcheon
Mechanism
CD Ass'y 1
-No.2
B
Fig. 1.2
C
Fig. 1.3
1-3
Mechanism
CD Ass'y 2
-No. 1
Mechanism
CD Ass'y 1
-No. 3
SS-9 Main Unit Section
1.4. Front P.C.B. Ass'y
Refer to Fig. 1.4.
(1) Remove the Mechanism CD Ass'y. Refer to item 1.3.
(2) Remove screws F01 (BT2.6x6 + Flat Head, 2 pcs.) and F02 (PT2.6x8 + Flat Head, 2 pcs.), and detach
F03 (Dress Plate Side C/D).
(3) Remove screws F04 (2 pcs.) and F05 (PT3x8 + Binding, 5 pcs.), and detach F06 (GND Wire Ass'y).
(4) Remove F07 in the direction shown by the arrow while passing the power switch cable through the hole "A" and 3 connectors through the hole "B".
(5) Remove F08 (Power Switch) outward while pinching its claws inward.
(6) Remove screws F09 (PT3x5 + Binding, 4 pcs.) and
F10 (PT3x8 + Binding, 3 pcs.), and detach F11 (Front
P.C.B. Ass’y).
Notes on reassembling:
• When assembling F08 (Power Switch), be careful so as not to assemble it upside down.
• When assembling F07, pass the power switch cable through the hole "A" and 3 cables through the hole "B".
1.5. Mechanism Chassis Block/Door Block of the
Mechanism CD Ass'y
Refer to Fig. 1.5.
(1) Remove the Mechanism CD Ass'y. Refer to item 1.3.
(2) Remove screws F01 (M2.6x5 + Binding, 4 pcs.), unhook the spring F02, and detach F03 (Mechanism
Chassis Block) from the Door Block.
Mechanism Chassis
Block
B
A
Door Block
Fig. 1.5
1.6. Disc Loading Ass'y
Refer to Fig. 1.6.
(1) Remove the Door Block of the Mechanism CD Ass'y.
Refer to item 1.5.
(2) Remove screws F01 (PT2.6x6 + Binding (Black), 4 pcs.), and detach F02 (Disc Loading Ass'y).
Front
P.C.B.
Ass’y
Disc Loading Ass'y
Fig. 1.4
Fig. 1.6
1-4
1.7. CD P.C.B. Ass'y and Traverse Mecha Ass'y
Refer to Figs. 1.7.1 and 1.7.2.
(1) Remove the Mechanism Chassis Block. Refer to item
1.5.
(2) Remove screws F01 (M3x5 + Binding (Black), 4 pcs.),
F02 (Stabi SP) and F03, and detach F04 (Traverse
Mechanism Block). Refer to Fig. 1.7.1.
Traverse Mechanism Block
SS-9 Main Unit Section
Laser diode shorting lands
CD P.C.B. Ass’y
Traverse Mecha
Ass’y
Fig. 1.7.2
Fig. 1.7.1
(3) Remove screws F01 (M2.6x4 + Binding (Black), 3 pcs.), collars F02 (3 pcs.) and one screw F03 (M2.6x4
+ Pan (Black)), and detach F04 (Traverse Cover CD).
Refer to Fig. 1.7.2.
(4) Short the laser diode shorting lands with a soldering iron.
Note: Use the soldering iron whose metal part is grounded or a ceramic soldering iron.
CAUTION: Do not disconnect the Flexible Cable from the CD P.C.B. Ass'y unless the laser shorting lands are shorted.
(5) Remove screws F05 (M3x5 + Binding), 4 pcs.) and detach F06 (CD P.C.B. Ass’y).
(6) Remove three Damper Screw SL and one Damper
Screw SD, and detach F07 (Traverse Mecha Ass'y).
Notes on reassembling:
• Unsolder the laser diode shorting lands after reassembling the CD P.C.B. Ass'y.
1-5
SS-9 Main Unit Section
1.8. Laser Pickup
1.8.1.
Removing the Laser Pickup
Refer to Fig. 1.8.1.
(1) Remove the Traverse Mecha Ass'y. Refer to item 1.7.
(2) Remove screws F01 (M1.7x4 + Pan, 2 pcs.) and F02
(M2.6x3.5 + Pan, 2 pcs.), and F03 (4 pcs.), and disassemble F04 (Laser Pickup Block).
(3) Pull out the PU Guide Shaft SL from the Laser Pickup
Block.
(4) Before disconnecting the Pickup Flexible P.C.B. from the Laser Pickup, short the laser diode shorting lands on the bottom of the Laser Pickup. Refer to Fig. 1.8.2.
NOTE: Use the soldering iron whose metal part is grounded or a ceramic soldering iron.
(5) Disconnect the Pickup Flexible P.C.B. from the Laser
Pickup.
Short
Already shorted.
(See Fig. 1.7.2)
Fig. 1.8.2
1.9. Sled Motor
1.9.1.
Removing the Sled Motor
Refer to Fig. 1.9.1.
(1) Remove the Traverse Mecha Ass'y. Refer to item 1.7.
(2) Remove a cut washer F01 and pull out F02 (Second
Gear).
(3) Remove screws F03 (M1.7x2.5 + Pan #0 Type 3
(Black), 2 pcs.) and detach the Sled Motor Block.
(4) Remove F05 (First Gear) from F04 (Sled Motor).
(5) Unsolder the wires of F04 (Sled Motor) from the Traverse P.C.B. Ass'y.
PU Guide Shaft SL
✪
✪
: Apply lubricant
G-4270.
✪
Fig. 1.8.1
1.8.2.
Installing a New Laser Pickup
(1) Connect the Pickup Flexible P.C.B. to the new Laser
Pickup. Refer to Fig. 1.8.2.
(2) Open the laser diode shorting lands on the bottom of the Laser Pickup.
NOTE: Use the soldering iron whose metal part is grounded or a ceramic soldering iron.
(3) Insert the PU Guide Shaft SL into the Laser Pickup.
(4) Assemble F04 (Laser Pickup Block) with F03 ( 4 pcs.) by tightening screws F02 (2 pcs.) with a torque of 3.0
kg-cm.
(5) Assemble F04 (Laser Pickup Block) with screws F01
(2 pcs.) with a torque of 1.2 kg-cm. Refer to Fig. 1.8.1.
1-6
✪
: Apply lubricant
G-4270.
Fig. 1.9.1
1.9.2.
Installing a New Sled Motor
(1) Reassemble F04 (Sled Motor) with screws F03 (2 pcs.) with a torque of 2.0 kg-cm.
NOTE: Pay attention to the sled motor installing direction. Install it as shown in Fig. 1.9.1.
(2) Press fit a new F05 (First Gear) so that the gap between the chassis surface and the bottom of F05 (First
Gear) is 0.1 mm as shown in Fig. 1.9.2.
(3) Solder the wires of F04 (Sled Motor) to the Traverse
P.C.B. Ass'y.
(4) Reassemble other removed parts by reversing the removal procedure.
Fig. 1.9.2
SS-9 Main Unit Section
How to reassemble the UD Cam S and UD Cam
How to identify the UD Cam S and UD Cam:
The UD Cam S is used on the left side of the CD Mechanism Ass'y in Fig. A. It has the projections as shown below:
While, the UD Cam is used on the right side of the CD
Mechanism Ass'y in Fig. A, and has not projections.
• Note that they move in the opposite direction each other. For example, in Fig. A, when the UD Cam S moves backwards, the UD Cam moves forward.
UD Cam S
Cam D WW Guide
Cam D L Gear
UD Cam S
Projection
Cam D L Gear
Rack
Cam Drive Gear
(1) Remove the cut washer and pull out the Cam D WW
Gear. Refer to Fig. A.
(2) Remove the cut washer and pull out the Cam D L
Gear. (Thus, the link between the UD Cam S and UD
Cam is lost.)
(3) Assemble the UD Cam S on the chassis so that its rack engages with the gear on the chassis. Then, by turning the Cam D L Gear on the chassis, align the edge of the UD Cam S with the edge of the chassis as shown in Fig. A. (
①
)
(4) Assemble the UD Cam on the chassis so that its rack engages with the gear on the chassis. Then, by turning the Cam Drive Gear on the chassis, align the edge of the UD Cam with the edge of the chassis as shown in Fig. A. (
➁
)
(5) Assemble the Cam D L Gear which was removed in
(2) and engage the cut washer. (Then, the UD Cam
S and UD Cam are linked.) (
➂
) Refer to Fig. B.
(6) By turning the Cam D L Gear, align the grooves on the UD Cam S and UD Cam with the center slit of the chassis as shown in Fig. B. (
④
)
• Fig. B shows the grooves on the UD Cam. Note that the shape of the UD Cam S's grooves are reversed.
(7) Assemble the Cam D WW Gear which was removed in (1) and engage the cut washer. (
➄
)
Note: If the assembled UD Cam S or UD cam is mis-positioned, the UD Plate S Ass'y (L or R) that engages with its grooves cannot be correctly assembled. In this case, you need to repeat above steps.
Cam D L Gear
UD Cam
Fig. A
Cam D WW Guide
Grooves on the UD Cam
Center Slit of the Chassis
Fig. B
1-7
2.
ELECTRICAL CHECKS
Perform the following electrical checks for CD Players.
2.1. Measurement Instruments and Jigs
(1) Oscilloscope (40 MHz or more)
(2) DC Voltmeter (Digital Voltmeter)
(3) ABEX Test Disc TCD-784 (DA09195A)
(4) ABEX Test Disc TCD-726A (DA09204A) or TCD-725A
2.2. Parts Location for Electrical Check
●
CD P.C.B. Ass'y of the CD Player
(Dip Side View)
SS-9 Main Unit Section
R101
Laser Current Check
Fig. 1.1 Parts Location for Electrical Check -- CD Player
1-8
Pin 1 of TP101
EFM Signal
SS-9 Main Unit Section
2.3. Electrical checks for CD Player
Note: Do the same check for CD Player Nos. 1 to 3.
STEP
1
ITEM SIGNAL OUTPUT
SOURCE CONNECTION
Laser Current ABEX Test Disc DC Voltmeter
Check TCD-784 across R101 on CD P.C.B.
—
ADJUST-
MENT
KSS-540A
REMARKS
1. Turn ON the power and load a test disc.
(To load the test disc, press the Open/Close button of the CD Player.)
2. Play back the test disc and calculate the current flowing into R101 on the CD P.C.B. Ass'y from the following formula.
Voltmeter Value
I(Measured) =
R101 (10 Ohms)
= oo.o mA
Example:
510.3 (mV)
I(Measured) = = 51.03 mA
10 (ohms)
Laser Pickup
KSS-540A
IOP(oo.omA)
3. Check that the I(Measured) obtained in 2 and the rated current value (IOP) shown on the label are almost the same.
[How to read IOP on the label]
The shaded "OOO" on the label shows the IOP.
If "OOO" is 475, the IOP is 47.5mA.
NOTE: The calculated current (I(Measured)) should be in a range of 30 to 60 mA. If the value is large, the pickup will be defective.
4. Stop the test disc.
2 EFM Signal
Adjustment
ABEX Test Disc Oscilloscope
TCD-784 between pin 1 of TP101 and GND on CD P.C.B.
— 1. Play back the first track of the test disc.
2. Be sure that the peak-to-peak value of the EFM waveform is approx. 1V.
Approx. 1Vp-p
Oscilloscope Setting:
AC Mode, 0.2 V/div, 0.5
µ s/div
3. Stop the test disc and eject it.
1-9
SS-9 Main Unit Section
STEP
3
ITEM SIGNAL OUTPUT
SOURCE CONNECTION
Operation
Check
ABEX Test Disc
TCD-726 or TCD-725A
ADJUST-
MENT
—
REMARKS
Make sure that no noise nor track-jumping is found in the following programs on the test disc.
To select the desired program, press Track Search button on the Main Unit or Remote Control
• Interruption 0.8mm: 4th program
• Black dot Ø0.6mm: 8th program
• Simulated fingerprint Ø65
µ m: 13th program
1-10
SS-9 Main Unit Section
3.
MECHANISM ASS'Y AND PARTS LIST
3.1. Main Stand Ass'y
06
03
L01
05
04
01
L02
Fig. 3.1
02
L02
3.1. Main Stand Ass'y
Schematic
Ref. No.
01
02
03
04
05
06
L01
L02
Part No.
—
Description
Main Stand Ass’y (Main Unit)
0J08792A Base Cushion Center S
0H08793B Stand Base Center R
0H08792B Stand Base Center L
0H08791D Base Joint
0H08796B Stand Pole
0H08790C Stand Holder Center
0E04323A BT4x10 + Oval Countersunk
0E03972A BT4x12 + Binding
Q'ty
1
1
1
2
1
1
1
1-11
L01
01
SS-9 Main Unit Section
3.2. Synthesis (Main Unit)
Mechanism CD
Ass'y 1 (A01) 01
Mechanism CD
Ass'y 2 (A01)
02
L01
L01
04
05
L07
07
L02
06
08
L03
11
09
03
L02
L03
12
13
L04
L05
L15
14
L05
L06
12
13
L03
L04
L06
L05
L06
L02
21
06
L02
L07
L06
L14
L06
20
L03
06
L16
15
L08
16
L09
L08
L07
L09
L07
L07
L08
L09
L08
L11
L13
L10
19
Fig. 3.2
18
1-12
L12
17
10
L18
L17
L12
06
07
08
09
Q'ty
1
3
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
12
12
1
SS-9 Main Unit Section
1-13
SS-9 Main Unit Section
3.3. Mechanism CD Ass'y 1/Mechanism CD Ass'y 2 (A01)
01
02
L03
08
10
03
04
05
Traverse Mecha Ass'y
(B02) 12
L05
13
06
L01
Disc Loading Ass'y
(B03) 07
11
L04
09
L05
L06
16
L08
14
L06
Mechanism Chassis
Ass'y (B01) 15
L02
L02
17
L09
L07
L07
Fig. 3.3
1-14
SS-9 Main Unit Section
01
12
13
14
15
16
17
L01
L02
L03
L04
L05
L06
L07
L08
L09
07
08
09
10
11
02
03
04
05
06
3.3. Mechanism CD Ass'y 1 (A01)
Schematic
Ref. No.
Part No.
Description
A01 — Mechanism CD Ass’y 1
HG08576A Door Cap Ass’y 2 (for Unit No. 2)
HG08577A Door Cap Ass’y 3 (for Unit No. 3)
0H08735C Dress Plate Door A
0H08736C Window Door
0J08729B D. Cap Spring
0H08734B Escutcheon Door
0H08812A Illumination Lens
CA09459A Disc Loading Ass’y
0C10450B Traverse Cover CD
0C10575A Sleeve 4x2.7x2.1
0C10449A Damper Screw SD
0C10287A Damper Screw SL
CA09504A Traverse Mecha Ass’y
0C10448A D Unit Base
BK10349A CD P.C.B. Ass’y
— Mechanism Chassis Ass’y
0C10578A Stabi SP
HA08656B F Panel ME CD S Ass’y
0E04174A PT2x5 + Binding
0E04035A PT2.6x6 + Binding (Black)
0E03197A M2.6x4 + Pan (Black)
0E00945A M2.6x4 + Binding (Black)
0E03270A M3x5 + Binding (Black)
0E00964A M3x5 + Binding
0E03950A M2.6x5 + Binding
0E00174A Earth Lug B-4
0E04308A M2x3.5 + Pan #0 Type 3
Q'ty
2
1
1
1
1
1
3
1
1
1
3
1
9
1
1
1
1
1
1
3.3. Mechanism CD Ass'y 2 (A01)
Schematic
Ref. No.
Part No.
Description
A01 — Mechanism CD Ass’y 2
13
14
15
16
17
08
09
10
11
12
01
02
03
04
05
06
07
L01
L02
L03
L04
L05
L06
L07
L08
L09
HG08549A Door Cap Ass’y 1 (for Unit No. 1)
0H08824C Dress Plate Door B
0H08736C Window Door
0J08729B D. Cap Spring
0H08734B Escutcheon Door
0H08812A Illumination Lens
CA09459A Disc Loading Ass’y
0C10450B Traverse Cover CD
0C10575A Sleeve 4x2.7x2.1
0C10449A Damper Screw SD
0C10287A Damper Screw SL
CA09504A Traverse Mecha Ass’y
0C10448A D Unit Base
BK10349A CD P.C.B. Ass’y
— Mechanism Chassis Ass’y
0C10578A Stabi SP
HA08656B F Panel ME CD S Ass’y
0E04174A PT2x5 + Binding
0E04035A PT2.6x6 + Binding (Black)
0E03197A M2.6x4 + Pan (Black)
0E00945A M2.6x4 + Binding (Black)
0E03270A M3x5 + Binding (Black)
0E00964A M3x5 + Binding
0E03950A M2.6x5 + Binding
0E00174A Earth Lug B-4
0E04308A M2x3.5 + Pan #0 Type 3
Q'ty
1
1
1
1
1
1
1
3
1
3
1
1
1
1
1
9
1
1
1-15
SS-9 Main Unit Section
3.4. Mechanism Chassis Ass'y (B01)
L01
01
02
★
03
04
L03
L02
★
07
★
08
L03
05
★
L03
12
L04
L05
20
13
14
06
★
L04
09
✪
10
11
★
L04
L06
L01
★
★
07
★
17
15
★
18
★
19
★
16
★
: Apply lubricant FL-955
✪
: Apply lubricant G-4270
Lubricant:
We suggest that you use FL-
955/G-4270 or equivalent type.
Please contact:
Kanto Chemicals Co. Ltd., 2-
7 Kanda Sakuma-cho,
Chiyoda-Ku, Tokyo, Japan
★
3.4. Mechanism Chassis Ass'y (B01)
Schematic
Ref. No.
B01
Part No.
—
Description
Mechanism Chassis Ass’y
13
14
15
16
17
18
08
09
10
11
12
01
02
03
04
05
06
07
0C10437A UD Cam Guide
0C10435A Cam Guide Chassis S
0C10439C UD Cam S
BK10424A SEN UD P.C.B. Ass’y
0C10441A Cam D L Gear
0C10443A Cam D WW Guide
0C10440A Cam Drive Gear
0C10442A Cam D S Gear
CA09458A WP Base S Ass'y
0C10444A Cam D Worm Pulley
0C10446A Belt 1.5S D18.5
0B85683A 2P Wire Ass’y UD_MOT
CA09511A UD Motor SD S Ass'y
0C10447A Cam Motor Holder
0C10436A Cam Guide Chassis L
0C10438A UD Cam
CA09472A UD Plate S Ass’y
0C10496A UD Cam Roller
✪
★
Approx. 10mm
★
Fig. 3.4
Q'ty
1
1
1
1
1
2
6
1
1
1
1
1
2
1
1
1
4
1
1
18
★
★
Approx. 10mm
19
★
17
Schematic
Ref. No.
19
20
L01
L02
L03
L04
L05
L06
Part No.
Description
0C10514A UD Cam Roller S
0C10265A Motor Grommet SL
0E03270A M3x5 + Binding (Black)
0E04085A M2x3.5 (Black)
0E03955A Cut Washer 2.2x4.2x0.2
0E03964A ST2.6x3 + Pan #0 Type 3
0E03700B Coating Clip
0E03953A M2x2 + Pan #0 Type 1 (Black)
Apply FL-955:
03,05-08: Whole surface
10: Worm gear only
16:
17:
Whole surface
2 places (on the left)
18,19: Whole surface
—: Chassis (8 places)
Q'ty
2
1
Apply G-4270:
09: Shaft
—: Chassis's shafts
(4 pcs.)
1-16
3.5. Traverse Mecha Ass'y (B02)
04
L01
01
L01
03
SS-9 Main Unit Section
L01
02
L02
L03
04
15
08
L02
06
07
05
✪
G-4270
14
L04
09
✪
: Apply lubricant G-4270.
Apply G-4270:
05: Shafts (3 pcs.)
11: Shaft holes (2 places)
Lubricant:
We suggest that you use G-4270 or equivalent type.
Please contact:
Kanto Chemicals Co. Ltd., 2-7
Kanda Sakuma-cho, Chiyoda-
Ku, Tokyo, Japan
3.5. Traverse Mecha Ass'y (B02)
Schematic
Ref. No.
B02
Part No.
Description
CA09504A Traverse Mecha Ass'y
07
08
09
10
11
12
01
02
03
04
05
06
0C10139B Second Gear
0C09923C Power Gear
0C10140B Third Gear
0C10279A Damper S SL
CA09364A Disc Motor Chassis Ass'y
BA09777A Traverse P.C.B. Ass'y
0B84608A 8P Flexible Wire
3B90704A Sled Motor
0C10141C Rack CA
0C10277A PU Guide Shaft SL
0B90741A Pickup KSS-540A
0B61355A Pick up Flexible P.C.B.
13
L05
10
✪
G-4270
11
Q'ty
1
1
1
1
1
1
1
1
4
1
1
1
1
13
L05
Fig. 3.5
12
Schematic
Ref. No.
13
14
15
L01
L02
L03
L04
L05
Part No.
Description
0C10278A Shaft Lock Plate SL
0C10282A PU Guide Plate H SL
0C10138B First Gear
0E04343B Cut Washer 1.6x3.2x0.2 (Black)
0E03845A M1.7x2.5 + Pan #0 Type 3 (Black)
0E00955A BT2x4 + Binding
0E00887A M1.7x4 + Pan
0E03947A M2.6x3.5 + Pan (#0 Type 3)
Q'ty
4
1
1
1-17
SS-9 Main Unit Section
3.6. Disc Loading Ass'y (B03)
L01
01
L02
★
10
L04
11
★
12
L05
09
L01
13
02
★
06
L04
★
L01
★
03
★
08
L03
L01
03
★
07
04
★
05
★
L04
L01
06
★
L02
L06
15
16
17
L17
14
24
L07
L08
L09
L06
L02
21
L10
18
19
20
L04
★
L12
★
11
27
28
L04
25
L11
★
26
: Apply lubricant FL-955
Lubricant:
We suggest that you use grease
FL-955 or equivalent type.
Please contact:
Kanto Chemicals Co. Ltd., 2-7
Kanda Sakuma-cho, Chiyoda-
Ku, Tokyo, Japan
★
35
L10
L13
L01
30
31
33
29
L13
32
34
22
23
L12
11
★
36
40
41
★
42
44
43
L10
53
L14
45
★
Fig. 3.6
L11
26
★
37
★
39
38
★
L02
L15
46
★
47
★
★
49
50
51
L02
L16
48
54
52
1-18
SS-9 Main Unit Section
3.6. Disc Loading Ass'y (B03)
Schematic
Ref. No.
B03
Part No.
Description
CA09459A Disc Loading Ass’y
13
14
15
16
17
08
09
10
11
12
01
02
03
04
05
06
07
22
23
24
25
18
19
20
21
26
27
28
29
30
31
32
33
34
35
BK10421A LED P.C.B. Ass’y
0C10518A Link Cover
0C10510A Clamp Holder
0C09988B Clamp Top
0C10456A Clamp Arm L
CA09462A Clamp Link S Ass’y
0C10458A Clamper RE SP SD
0C10457A Clamp Arm S
0C10465A LDG D Cam SP
0C10562A LDG Cam Tip
0C10466A LDG Guide Roller
0C10511A D Sens Cam
0C10464A LDG D Cam Holder
BK10422A SEN LD1 P.C.B. Ass’y
BK10423A SEN LD2 P.C.B. Ass’y
0C10567A Edge Protector
CA09461A D Sens Link S Ass’y
0C10459A Dsens Arm Base
0C10461A Dsens Arm SP
0C10460A Disc Sens Arm
0C10455A Disc Guide SD
0C09922B Disc Cramp Base
0C09997B Steel Ring
CA09460A Loading Chassis SD S Ass’y
0C10561A LDG Cam Roller
0C10215A LP Slider SL
CA09467A Loading Plate L SD S Ass’y
CA09468A Disc G L SD S Ass’y
0C10491B D Shutter Base
0C10493A D Shutter Shaft
0C10490A D Shutter
0C10492B D Shutter SP
0C10255A Shutter Arm Cushion SL
0C10252A Loading Return Spring SL
0C10454A LDG Center Guide SD
Q'ty
1
1
1
1
1
1
1
5
1
1
1
1
2
1
2
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
Schematic
Ref. No.
L02
L03
L04
L05
L06
L07
L08
L09
L10
L11
L12
L13
L14
L15
L16
L17
41
42
43
44
45
36
37
38
39
40
50
51
52
53
46
47
48
49
54
L01
Part No.
Description
CA09464A Loading Plate R SD S Ass’y
0C10191A Idler Pulley SL
0C10192A Pulley Fork SL
0C10193A Pulley Spring SL
0C10476B LDG Guide R SD
0C10477A Timing Belt SD
0C10213A Timing Gear SL
0C10478A Loading Link B SD
CA09465A Loading Link A S Ass’y
0C10479A LDG Idle Gear SD
0C10488A LDG Motor Holder
CA09512A Loading Motor SD S Ass'y
0C10265A Motor Grommet SL
0C10236A Loading Worm Gear SL
0C10237A Loading Sensor Ring SL
0C10563A LDG Motor Cover
CA09470A Loading Motor Chassis S Ass’y
0C10480A LDG Gear Collar SD
0B85682A 2P Wire Ass’y LD_MOT
0E04085A M2x3.5 (Black)
0E03964A ST2.6x3 + Pan (#0 Type 3)
0E03943A BT1.7x5 + Pan #0 Type 3 (Black)
0E03954A Cut Washer 1.6x3.2x0.2
0E03243A M2x2.5 + Pan
0E03700B Coating Clip
0E00869A BT2.6x4 + Binding
0E03461A BT2x2.5 + Pan (Black)
0E03970A M2.6x3 + Pan #0 Type 3
0E03955A Cut Washer 2.2x4.2x0.2
0E03961A BT2x4 + Pan #0 Type 1 (Black)
0E04310A E Ring 1.5mm
0E04119A Washer 1.2x3x0.25
0E03969A M1.4x3 + Pan #0 Type 3
0E03953A M2x2 + Pan #0 Type 1
0E03845A M1.7x2.5 + Pan #0 Type 3 (Black)
0E04075A M2x3.5 + Pan #0 Type 1 (Black)
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Apply FL-955:
03: Whole surface
04: Whole surface
05: Around the hole
06: Whole surface
08: Around the hole
10: Whole surface
11: Whole surface (4 pcs. only)
12: Holes (5 places)
26: Whole surface
35: Whole surface
37: Whole surface
38: Whole surface
42: Whole surface
45: Whole surface
47: Worm gear only
49: Whole surface
50: Whole surface
1-19
SS-9 Main Unit Section
4.
ELECTRICAL PARTS LIST
NOTES: 1. Abbreviations
TR – Transistor, SID – Silicon Diode, ZD – Zener Diode, Varicap – Variable Capacitance Diode
RK – Carbon Resistor, RM – Metal Film Resistor, RF – Fail Safe Type Resistor,
RC – Cement Resistor, CE – Electrolytic Capacitor, CML – Mylar Capacitor,
CC – Ceramic Capacitor, CPP – PP Capacitor, CMM – Metalized Mylar Capacitor,
CSP – Polystyrene Capacitor, C – Mica Capacitor, CT – Tantalum Capacitor
2. Description of capacitor: 10 16V = 10
µ
16V
3. Parts marked with * show chip parts.
4.1. Main P.C.B. Ass'y
Schematic
Ref. No.
U102
U103
U151
U152
Q201L,R
Q301L,R
Q302
Q303L,R
Q304L,R
Q305
Q501
Q502
Q503
Q504
Q505
Q506
Q507
Q508
Q509
Part No. Description
BK10318A Main P.C.B. Ass’y DM
(JPN)
BK10319A Main P.C.B. Ass’y UL
(USA, CAN, DA, TW)
BK10320A Main P.C.B. Ass’y EP
(UK, AUS, EP, CH, HK,
KR)
BK10321A Main P.C.B. Ass’y OTR
(OTR)
0B10879A
0B11240A
0B11240A
0B17033A
IC
IC
IC
IC
NJM2114D
NJM78L05A
NJM78L05A
NJM78M12FA
U153 0B06124A IC NJM4558D
U201,202 0B10812A IC LC78211
U203 0B06124A IC NJM4558D
U204 0B10814A IC LC78213
U205,206 0B06124A IC NJM4558D
U207
U208
U209
U210
U211
U212
U306
0B12879A
0B12878A
0B11713A
0B17034A
0B17047A
IC
IC
IC
IC
IC
TC9459N
TC9184AP
UPC4570C
NJM78M15FA
NJM79M15FA
0B06124A IC NJM4558D
0B06370A IC NJM4556D
U307 0B12811A Toslink TOTX178A
U310,311 0B06124A IC NJM4558D
U312,313 0B06124A IC NJM4558D
U501
U502
U503
0B11609A
0B12863A
IC
IC
NJM78M05A
UPD78F4225GC-8*
0B12841A IC LC72722PM*
(UK, AUS, EP, CH, HK,
KR)
U504,505 0B12864A IC PQ30RV2
U506
U507
U631
U632
U633
U803
U807
ICP501
0B12864A IC PQ30RV2
0B17026A IC NJM78L08A
0B11602A IC TC74HC02AF
0B13319A IC TC74HC4538AF*
0B10824A IC Photocoupler
PC918X
0B12883A IC LC89055W*
0B12783A IC AD1855*
0B11639A IC Protector
ICP-N25 1.0A
0B14186A TR 2SC4213 B*
0B14186A TR 2SC4213 B*
0B14186A TR 2SC4213 B*
0B14186A TR 2SC4213 B*
0B14186A TR 2SC4213 B*
0B14186A TR 2SC4213 B*
0B14002A TR DTA114EK*
0B10357A TR DTB113ES
0B14167A TR 2SC2412K*
0B14013A TR DTC144EK*
0B14002A TR DTA114EK*
0B14004A TR DTA144EK*
0B14167A TR 2SC2412K*
0B14013A TR DTC144EK*
0B14002A TR DTA114EK*
Schematic
Ref. No.
Part No. Description
Q518,519 0B10882A TR DTC114TKA*
Q520 0B14013A TR DTC144EK*
Q521 0B14013A TR DTC144EK*
(UK, AUS, EP, CH,
HK, KR)
Q522 0B14013A TR DTC144EK*
Q523,524 0B10882A TR DTC114TKA*
Q525 0B14013A TR DTC144EK*
Q526
Q601
Q602
Q603
Q604
Q605
Q606
0B14011A
0B14002A
0B14013A
0B14004A
0B14002A
TR
TR
TR
TR
TR
DTC114EK*
DTA114EK*
DTC144EK*
DTA144EK*
DTA114EK*
0B14013A TR DTC144EK*
0B14167A TR 2SC2412K*
Q607,608 0B10882A TR DTC114TKA*
Q609
Q610
0B14002A
0B14011A
TR
TR
DTA114EK*
DTC114EK*
Q611,612 0B14013A TR DTC144EK*
Q631 0B14167A TR 2SC2412K*
ZD501 0B12147A ZD RD5.1V JS B2
D201,202 0B12249A SID 1SS133
D203 0B12249A SID 1SS133
D501,502 0B12249A SID 1SS133
D503 0B12725A SID 1SR139-100
D505,506 0B12249A SID 1SS133
D507,508 0B12249A SID 1SS133
D509,510 0B12249A SID 1SS133
D601,602 0B12249A SID 1SS133
D603 0B12249A SID 1SS133
D631,632 0B12249A SID 1SS133
D633 0B12249A SID 1SS133
L151,152
L501
L801,802
0B51183A Inductor 100uH
0B51369A Inductor 10mH
0B51392A Inductor 47uH
L803
L805
L806
X501
X502
0B51392A Inductor 47uH
0B51392A Inductor 47uH
0B51159A Inductor 1uH
0B91047A X’tal 8.38MHz
0B90889A X’tal 4.3320MHz
(UK, AUS, EP, CH,
HK, KR)
X801 0B90902A X’tal 12.288MHZ
R250,251 0B24365R RF 10
R501 0B24365R RF 10
1/4W J
1/4W J
R511
R513
R514
R552
R559
0B25612A RK 0 1/10W J*
(USA, CAN, DA, TW)
0B25563A RK 10K 1/10W J*
(OTR)
0B25612A RK 0 1/10W J*
(JPN)
0B24498R RF 120 2W
0B25612A RK 0 1/10W J*
(JPN, OTR, USA, CAN,
DA, TW)
R573
R576
0B25539A RK 1K 1/10W J*
(UK, AUS, EP, CH, HK,
KR)
0B25539A RK 1K 1/10W J*
(UK, AUS, EP, CH, HK,
KR)
Schematic
Ref. No.
R577
R676
C353L
C353R
C506
C519
C520
C521
C522
C523
C524
CP151
CP508
MJ201
MJ301
MJ501
PJ301
PJ302
PJ303
PJ304
4.2. Front P.C.B. Ass'y
Schematic
Ref. No.
U701
U702
U703
Q701
Q702
D701
Part No. Description
BK10352A Front P.C.B. Ass’y
0B12803A
0B10961A
0B13257A
0B10068A
0B10015A
0B12745A
IC
IC
IR SENSOR 38K
TR
TR
SID
LC7584E
NJU3713G*
DTC114ES
2SA1020 (O,Y)
MA719
Part No. Description
0B25539A RK 1K 1/10W J*
(UK, AUS, EP, CH, HK,
KR)
0B09995A RF 0.22
2W
0B43387A CPP 120P 100V J
(UK, AUS, EP, CH, HK,
KR)
0B43387A CPP 120P 100V J
(UK, AUS, EP, CH, HK,
KR)
0B42247A CE 0.1 5.5V F
0B40871A CE 10 16V
(UK, AUS, EP, CH, HK,
KR)
0B43092A CC 0.1 25V Z*
(UK, AUS, EP, CH, HK,
KR)
0B43206A CC 560P 50V J*
(UK, AUS, EP, CH, HK,
KR)
0B43061A CC 22P 50V J*
(UK, AUS, EP, CH, HK,
KR)
0B43061A CC 22P 50V J*
(UK, AUS, EP, CH, HK,
KR)
0B43092A CC 0.1 25V Z*
(UK, AUS, EP, CH, HK,
KR)
0B84330A F Connector 15P
5597-15CPB
0B81459A 2P T-Post (UK, AUS, EP,
CH, HK, KR)
0B80774A Mini Jack H
0B80774A Mini Jack H
0B80774A Mini Jack H
0B85629A 2P Pin Jack AU W R
0B85450A 6P Pin Jack AU W R
0B85910A 1P Pin Jack AU BLK
0B85629A 2P Pin Jack AU W R
0B90949A Tuner Pack TFCE1 DM
(JPN) (1)
0B90950A Tuner Pack TFCE1 UL
(USA, CAN, DA, TW) (1)
0B90951A Tuner Pack TFCE1 EP
(UK, OTR, AUS, EP, CH,
HK, KR) (1)
0B80668A DIN 13P Socket (1)
1-20
Schematic
Ref. No.
Part No. Description
LCD701
LED701
LED702
LED703
LED704
LED705
0B90913B LCD DLC-A1622P
0B12806A LED Green
0B12806A LED Green
0B12806A LED Green
0B12806A LED Green
0B12806A LED Green
LED706
LED707
LED708
LED709
LED710
LED712
HJ301
0B12806A
0B12806A LED Green
0B12865A LED WHITE
0B12865A
0B12865A
0B10825A
0B85811A
LED Green
LED WHITE
LED WHITE
LED Amber GL3HS43
Mini Jack SW1
SW901,902 0B70295A Tact Switch SKQBLB
SW903,904 0B70295A Tact Switch SKQBLB
SW905 0B70282A Tact Switch
SW908,909 0B70295A Tact Switch SKQBLB
SW910,911 0B70295A Tact Switch SKQBLB
SW912,913 0B70295A Tact Switch SKQBLB
4.4. LED P.C.B. Ass'y
Schematic
Ref. No.
LED1
LED2
LED3
SW1
Part No. Description
BK10421A LED P.C.B. Ass’y
0B12900A LED BLUE
0B12900A LED BLUE
0B13141A LED GREEN
0B70302A Tact Switch
4.5. SEN LD1 P.C.B. Ass'y
Schematic
Ref. No.
PC1,2
Part No. Description
BK10422A SEN LD1 P.C.B. Ass’y
0B10737A IC Photointerrupter
4.3. CD P.C.B. Ass'y
Schematic
Ref. No.
Part No. Description
BK10349A CD P.C.B. Ass’y
U101
U102
U103
U104
0B10691A IC CXA2521Q*
0B10948A IC CXD2587Q*
0B10953A IC TC4W53FU*
0B12955A IC BA5983FP*
U105,106 0B10719A IC TA8409F*
U180 0B10645A IC NJM2100M*
U501
U502
U601
Q101
0B12988A IC UPD78018FGC*
0B11928A IC TC4049BF
0B10832A IC TC74HCU04AF*
0B10731A TR 2SB1132*
Q102
Q103
Q106
Q403
0B14013A TR DTC144EK*
0B10652A TR DTC144TK*
0B12847A TR 2SK2158*
0B10901A TR 2SD2153TL*
Q404 0B10930A TR 2SD1758F*
Q411,412 0B14167A TR 2SC2412K*
Q413 0B14167A TR 2SC2412K*
Q414 0B10930A TR 2SD1758F*
Q501,502 0B14013A TR DTC144EK*
Q503,504 0B12847A TR 2SK2158*
Q505
ZD401
0B12847A TR 2SK2158*
0B12150A ZD RD5.6V JS B2
ZD403 0B12153A ZD RD6.2V JS B2
ZD404,405 0B12150A ZD RD5.6V JS B2
D101,102 0B10540A SID MA152WA*
D404 0B10540A SID MA152WA*
D406
L101
L102,103
L104
0B10540A SID MA152WA*
0B51300A Inductor 10uH
0B50287A Coil 120uH*
0B51138A Inductor 1mH
L105
L503
L601
X101
X501
C411
CP101
CP102
0B51183A Inductor 100uH
0B50287A Coil 120uH*
0B50287A Coil 120uH*
0B90672A X’tal 16.9344MHz
0B91047A X’tal 8.38MHz
0B42247A CE 0.1 5.5V F
0B80896A 16P F Connector*
0B85680A 8P F Connector*
4.6. SEN LD2 P.C.B. Ass'y
Schematic
Ref. No.
Part No. Description
BK10423A SEN LD2 P.C.B. Ass’y
PC3 0B10737A IC Photointerrupter
4.7. SEN UD P.C.B. Ass'y
Schematic
Ref. No.
Part No. Description
BK10424A SEN UD P.C.B. Ass’y
PC4,5 0B10737A IC Photointerrupter
SS-9 Main Unit Section
1-21
SS-9 Main Unit Section
5.
IC BLOCK DIAGRAMS
• System Controller (U502
µ
PD78F4225GC-8)
Pin No.
Signal Name
1 P15
2
3
MASTER
H.PIN
6
7
4
5
8
9
AVss
INH1
LCE1
AVref1
RDI
RDO
—
O
O
—
I
I
I/O
—
I
O
10
14
15
16
11
12
13
17
18
28
29
30
31
24
25
26
27
19
20
21
22
23
36
37
38
32
33
34
35
39
RCK
NC
NC
NC
DIFCE
DIFRES
CD-SI
CD-SO
CD—SCK
CD3RES
CD2RES
CD1RES
CD3CE
CD2CE
CD1CE
CD3EJC
CD2EJC
CD1EJC
NC
NC
LEDSTB
NC
L.STBY
Vss1
NC
NC
ST-VOL
ST-TONE
ST-AN
A-EN
O
—
—
O
—
I
I
O
I
O
O
O
O
O
O
O
O
O
—
—
—
O
O
I
—
—
—
O
I
O
Function
Grounded.
Remote controller's Main/Remote detect signal.
Headphone connection detect signal.
GND.
LCD/LED display inhibit signal.
Chip enable signal to the LCD driver.
Reference voltage.
Serial data input from the PLL and RDS ICs.
Serial data output to the PLL, RDS, LCD, VOL, LED and DIR ICs.
Serial clock output to the PLL, RDS, LCD, VOL, LED and DIR ICs.
Not used.
Not used.
Not used.
Active
L
H
L
H
L/H
L/H
L/H
Strobe output to the DIR IC.
Reset output to the DIR IC.
Serial data input from the CD Mechanism.
(Serial data input for flash ROM writing)
Serial data output to the CD Mechanism.
(Serial data output for flash ROM writing)
H
H
L/H
L/H
Serial clock input from the CD Mechanism.
(Serial clock input for flash ROM writing)
Reset signal to the Mechanism CD Ass'y (No. 3).
L/H
H
Reset output to the Mechanism CD Ass'y (No. 2).
Reset output to the Mechanism CD Ass'y (No. 1).
H
H
Chip enable output to the Mechanism CD Ass'y (No. 3).
H
Chip enable output to the Mechanism CD Ass'y (No. 2).
H
Standby
—
—
L
L
—
L
L
L
L
—
L
L
L
L
L
L
L
L
—
—
—
Chip enable output to the Mechanism CD Ass'y (No. 1).
H
Eject key input from the Mechanism CD Ass'y (No. 3).
L
Eject key input from the Mechanism CD Ass'y (No. 2).
Eject key input from the Mechanism CD Ass'y (No. 1).
L
L
Not used.
Not used.
Strobe signal to the LED IC.
Not used.
L
L Standby LED ON/OFF control signal.
GND.
Not used.
Not used.
Strobe output to the Volume IC.
Strobe output to the Tone IC.
Strobe output to the audio source switching and
Rec-out switching ICs.
Serial signal transmission permit output to the VOL,
TONE, AN ICs.
H
H
H
H
L
L
L
L
L
L
1-22
SS-9 Main Unit Section
• System Controller-Continued (U502
µ
PD78F4225GC-8)
74
75
76
77
70
71
72
73
78
79
80
66
67
68
69
62
63
64
65
57
58
59
60
53
54
55
56
61
49
50
51
52
45
46
47
48
Pin No.
Signal Name
40 NC
41
42
43
44
ENCDMU-M
ENCDMU-R
MUTE-M
MUTE-R
MUTE-PH
NC
NC
P-ON
REM
NC
NC
TCE
RDSCE
T-EN
NC
SD
ST
SYNC
RDSID
RESET
NC
P-OFF
PWR-SW
NC
NC
AD-PWR
Vss0
Vdd1
X2
X1
TEST/Vpp
XT2
XT1
Vdd0
Avdd
AREA
MODEL
KI1
KI0
SMETER
O
—
—
—
I
I
—
—
I
I
I
I
O
O
—
I
—
I
—
—
O
O
—
—
O
I/O
—
O
O
O
O
I
I
—
—
—
—
—
—
I
I
I
Function
Not used.
Main room muting permit output signal from the CD.
Remote room muting permit output signal from the CD.
Main room muting output.
Remote room muting output.
Headphone muting output.
Not used.
Not used.
Power ON control output.
Remote sensor input.
Not used.
Not used.
Chip enable signal to the PLL IC.
Chip enable signal to the RDS IC.
Communication permit output between the PLL IC.
Not used.
SD input from the PLL IC.
Stereo input from the PLL IC.
RDS sync input.
RDS ID input.
Reset input.
Not used.
Power OFF detect signal.
AMP power switching control input.
Not used.
Not used.
AD Power ON output.
GND.
+5V.
8.38MHz X'tal is connected.
8.38MHz X'tal is connected.
(For testing)
Not used.
Grounded.
+5V.
+5V.
Area selection input.
Model selection input.
Key input 1 signal.
Key input 2 signal.
S-meter input signal from the PLL IC.
Active Standby
H
H
L
L
L
H
L/H
L
L
L
—
—
—
—
—
L
L
L
L
L
H
H
H
—
—
—
—
—
—
—
—
—
—
L
L
L
L
L
L
L
L
L
—
—
—
H
1-23
SS-9 Main Unit Section
35
36
37
38
31
32
33
34
27
28
29
30
23
24
25
26
43
44
45
39
40
41
42
19
20
21
22
15
16
17
18
11
12
13
14
8
9
10
SCOR
VDD
X2
X1
IC
XT2
P04
LDEJECT
VSS
UDUP
UDDOWN
P60
P61
P62
P63
L EJ
MUTE
L-BLUE
L-GREEN
RESET
P00
SHUTTER
LOAD
LD ON
VSS
P40
P41
ML
MC
MD
DACRST
MVCONT
P47
DISCIN
P51
UD
HOME
LDLOAD
I
I
I
—
O
O
O
O
—
—
—
—
O
—
O
O
—
—
I
I
—
—
—
—
I
I
O
O
O
—
I
—
O
O
O
O
—
—
• Mechanism Controller (U501
µ
PD78018FGC)
6
7
4
5
Pin No.
Signal Name
1 LSI DATA
2
3
LSI CLK
LSI XLT
SCLK
CDRST
EN CLK
IR
O
O
O
O
I/O
O
O
O
Function
DSP command data output.
DSP command clock output.
DSP command latch pulse output.
DSP servo parameter readout clock.
DSP reset output.
DSP clock ON/OFF output.
Interruption countermeasure circuit ON/OFF control output.
Laser ON/OFF control output.
GND.
(For testing, etc.)
(For testing, etc.)
Latch output to the DAC IC.
Serial clock output the DAC IC.
Serial data output to the DAC IC.
DAC reset output.
Loading speed setting output. ( H=7V, L=5V )
Not used.
Mechanism loading sensor input.
Not used.
Mechanism Up/Down sensor input.
Mechanism Up/Down sensor input.
Mechanism loading motor drive output.
Mechanism loading motor drive output.
GND.
Mechanism Up/Down motor drive output.
Mechanism Up/Down motor drive output.
Not used.
Not used.
Not used.
Not used.
Eject LED ON/OFF control output.
Audio mute output.
Blue illumination ON output.
Green illumination ON output.
Reset input.
Grounded.
Mechanism loading sensor input.
Mechanism loading sensor input.
DSP SCOR signal input.
+5V.
8.388608 MHz clock.
8.388608 MHz clock.
Grounded.
Not used.
Supplied with +5V.
—
—
H
H
H
H
H
H/L
H/L
L
H
—
Active Standby
H/L L
H/L
L
L
L
H/L
L
H
L
L
L
L
L
L L
H
H
H
H
—
—
—
—
—
—
L
L
L
H
L
L
—
—
L
L
L
L
L
L
L
—
1-24
SS-9 Main Unit Section
• Mechanism Controller-Continued (U501
µ
PD78018FGC)
55
56
57
58
51
52
53
54
59
60
Pin No.
Signal Name
46 AVss
47
48
49
50
P10
P11
P12
BSENS
ASENS
LSISENS
FOK
GFS
AVDD
AVREF
DATAIN
DATAOUT
CLK IN
CE
61
62
63
64
P24
SQSO
P26
SQCK
—
—
I
O
I
I
I
I
I/O
—
—
—
—
I
GND.
Function
(For testing, etc.)
(For testing, etc.)
Not used.
Battery voltage sensing input.
ACC voltage sensing input.
DSP sensing input.
FOCUS OK signal input.
GFS OK signal input.
+5V.
Reference voltage.
Serial data input from the system.
Serial data output to the system.
IN
—
O
I Serial clock input from the system.
I/O Communication line between the system.
—
(CE: IN ACK: OUT)
Not used.
DSP SubQ data input.
Not used.
DSP SQSO readout clock.
Active Standby
—
—
—
—
—
—
H/L
—
H
—
H/L
H
H
—
—
—
—
L
—
IN
—
L
VDD
14
A6
13
Y6
12
A5
11
Y5
10
A4
9
Y4
8
OUTPUT A 1
INVERTING
INPUT A
2
NON-INVERTING
INPUT A
3
-V
4
–
A
+ +
B
–
8 +V
7 OUTPUT B
6
INVERTING
INPUT B
5
NON-INVERTING
INPUT B
(TOP VIEW)
Operational Amp. NJM2100, NJM2114, NJM4556,
NJM4558,
µ
PC4570
VDD
16
2T1
15
2T2
14
2CD
13
2A
12
2B
11
2Q
10
2Q
9
1
A1
2
Y1
3
A2
4
Y2
5
A3
6
Y3
7
GND
(TOP VIEW)
Inverter TC74HCU04AF/TC4049BF (U502, U601)
VDD
14
A4
13
B4
12
Y4
11
Y3
10
A3
9
B3
8
A
T1 T2
Q
B
Q
CLR
A
T1
B
CLR
T2
Q
Q
1
1T1
2
1T2
3
1CD
4
1A
5
1B
6
1Q
7
1Q
8
VSS
(TOP VIEW)
One shot Multi-vibrator TC74HC4538AF (U632)
1
A1
2
B1
3
Y1
4
Y2
5
A2
6
B2
(TOP VIEW)
NOR Gate IC TC74HC02AF (U631)
7
GND
1-25
SS-9 Main Unit Section
6
L5
7
L6
8
LCOM2
9
L7
10
L8
11
LCOM3
19
VDD
16
VSS
12
VEE
18
RES
17
S
3
L3
4
L4
5
LCOM1
1
L1
2
L2
LEVEL SHIFT
LATCH
SHIFT REGISTER
CONTROL
Function Switch LC78211 (U201, 202)
14
DI
15
CL
13
CE
30
R1
29
R2
28
R3
27
R4
26
RCOM1
25
R5
24
R6
23
RCOM2
22
R7
21
R8
20
RCOM3
1
L1
2
L2
3
LCOM1
4
L3
5
L4
6
LCOM2
7
L5
8
L6
9
LCOM3
10
L7
11
LCOM4
19
VDD
16
VSS
12
VEE
18
RES
17
S
LEVEL SHIFT
LATCH
SHIFT REGISTER
CONTROL
14
DI
15
CL
13
CE
30
R1
29
R2
28
RCOM1
27
R3
26
R4
25
RCOM2
24
R5
23
R6
22
RCOM3
21
R7
20
RCOM4
Function Switch LC78213 (U204)
10
DATA
11
CLK
SHIFT
REGISTER
LATCH
CIRCUIT
12
STB
13
CLR
CONTROL CIRCUIT
12-Bit Serial-to-Parallel Converter NJU3713G (U702)
16
P3
17
P4
14
P1
15
P2
1
P5
2
P6
3
P7
4
P8
5
P9
7
P10
8
P11
9
P12
5
VSS
18VDD
A
5
2
INH
VDD
8
OUT IN
C
OUT IN
C
1
COM
7
CH0
6
CH1
4
VSS
3
VEE
INH
L
L
H
A
L
H
∗
COM
CH0
CH1
NONE
∗
: Don’t Care
Motor Driver TC4W53FU (U103)
1-26
SS-9 Main Unit Section
2
BASS+
VSS
1
VDD
16
GND
7
CK
8
DATA
9
STB
10
LEVEL SHIFT 15
BASS+
3
BASS—
4
COM
5
TREBLE—
14
BASS—
13
COM
12
TREBLE—
6
TREBLE+
CODE
DETECTOR
CIRCUIT
Electronic Tone Controller TC9184AP (U208)
VSS
1
VDD
28
NC 2
L-OUT 3
NC 4
L-IN 5
L-LD1 6
L-LD2 7
L-A-GND 8
NC 9
50K‰ /
91STEP
VR
CS1 10
NC 11
NC 12
GND 13
CK 14
SAME AS
FOR L-CH
L-CH 7 TO 91 DECODER
L-CH LATCH CIRCUIT
R-CH 7 TO 91 DECODER
R-CH LATCH CIRCUIT
SHIFT REGISTER (24 BITS)
LEVEL SHIFTER
Electronic Volume Controller TC9459N (U207)
19 CS2
18 NC
17 NC
16 STB
15 DATA
27 NC
26 R-OUT
25 NC
24 R-IN
23 R-LD1
22 R-LD2
21 R-A-GND
20 NC
11
TREBLE+
1-27
SS-9 Main Unit Section
PREVCC
28
OPIN4(+) OPIN4(–) OPOUT4 OPIN3(+) OPIN3(–) OPOUT3
27 26 25 24 23 22
VCC
+ – + –
GND
21
STBY2
20
POWVCC2 VO3(–)
19 18
VO3(+)
17
VO4(–)
16
VO4(+)
15
STANDBY
CH4
VCC
– + + – – + + –
10K
10K
20K
–
+
+
–
10K
10K
20K
–
+
LEVEL
SHIFT
LEVEL
SHIFT
LEVEL
SHIFT
10K
+
–
10K
LEVEL
SHIFT
+ – + –
STANDBY
CH1/2/3
VCC
– + + – – + + –
1 2 3
BAIAS-IN OPIN1(+) OPIN1(–)
4 5 6
OPOUT1 OPIN2(+) OPIN2(–)
7
OPOUT2
8
GND
Driver BA5983FP (U104)
9 10 11
STBY1 POWVCC1 VO2(–)
12
VO2(+)
13
VO1(–)
14
VO1(+)
3
VDDa
4
VSSa
2
MPXIN
20
DO
21
CL
22
DI
23
CE
7
T1
8
T2
9-11,16,17
T3-T7
REFERENCE
VOLTAGE
ANTIALIASING
FILTER
CCB
TEST
VREF
1
67KHz
BPF
(SCF)
RAM
(24 BLOCK DATA)
MEMORY CONTROL
FLOUT
5
CIN
6
VREF
+
–
SMOOTHING
FILTER
CLK(4.332KHz)
OSC/DIVIDER
PLL
(67KHz)
ERROR CORRECTION
(SOFT DECISION)
13
XIN
12
XOUT
RDS Decoder LC72722PM (U503)
CLOCK
RECOVERY
(1187.5Hz)
DATA
DECODER
SYNC/EC CONTROLLER
SYNC
DETECT-1
SYNC
DETECT-2
14
VDDd
15
VSSd
19
RDS-ID
18
SYNC
24
SYR
1-28
SS-9 Main Unit Section
2 VCC 7 VS
V
REF
CIRCUIT
9
V REF
STANDBY
CIRCUIT
10
IN1
1
IN2
8
OUT1
3
OUT2
THERMAL
SHUT-OFF
Motor Driver TA8409F (U105, 106)
5 GND
23 MT
22 TON
21 CP 20 CC2
19 CC1
24 RFI
18 CB
17
25
RFO
26
RF M
27
VCC
28
LD ON
29
LD
30
PD
31
A
32
B
VC
44K
18K
VC
VC
-
+
39K
39K
7.5K
-
+
32K
75K
VCC
VC
VCC
PEAK/BOT
HOLD
-
+
+
-
60K
1K
VC
32K
-
+
15K
+
-
100K
26K
130K
80K
8K
2K
4K
VC
40K
40K
VC
40K
-
+
40K
VC
10K
10K
10K
10K
VC
10K
-
+
4K
VC
-
+
+
-
80K
+
-
80K
80K
-
+
80K
VCC
20K
-
+
-
+
20K
54K
VC
92K
+
-
20K
VCC
15K
-
+
15K 50
32K
32K
VC
36.7K
+
-
160K
32K
32K
87K
VC
-
+
164K
174K
VC
16
MIRR
15
DFCT
14
FOK
13
GND
12
VC
11
VR
10
FE
9
FEB
1 C
2 D
3 GND 4 E 5 F
RF Amp. CXA2521Q (U101)
6 7 TE1 8 TE
1-29
SS-9 Main Unit Section
CL 38
CE 37
DI 36
EMPHA 23
AUDIO 24
DISEL 1
DOUT 2
DIN0 3
DIN1 4
DIN2 5
DOSEL0 44
R 8
VIN 9
LPF 10
CKSEL0 46
XSTATE 17
XIN 22
XOUT 21
XMCK 20
XSEL 39
35 DO
C BIT
MPU INTERFACE
DETECTOR
Pa,Pb
DETECTOR
INPUT DATA
DEMODULATOR
PLL TIMING
X' TAL1 fs CALCULATOR
LOCK
DETECTOR
25 CSFLAG
26 F0/P0/C0
27 F1/P1/C1
28 F2/P2/C2
29 VF/P3/C3
32 AUTO
33 BPSYNC
34 ERROR
16 DATAO
45 DOSEL1
13 CKOUT
14 BCK
15 LRCK
47 CKSEL1
40 MODE0
41 MODE1
48 XMODE
Digital Audio Interface Receiver LC89055W (U803)
CLOCK
IN
48/96Fs
CLOCK
CLOCK
CIRCUIT
CONTROL DATA
INPUT
3
SERIAL CONTROL
INTERFACE
VOLTAGE
REFERENCE
16-/18-/20-/24-BIT
DIGITAL DATA
INPUT
SERIAL
MODE
2
SERIAL DATA
INTERFACE
ATTEN/
MUTE
ATTEN/
MUTE
8 x
INTERPOLATOR
8 x
INTERPOLATOR
MULTIBIT SIGMA-
DELTA MODULATOR
MULTIBIT SIGMA-
DELTA MODULATOR
2 2
PD/RST MUTE DEEMP DIGITAL
SUPPLY
ANALOG
SUPPLY
Digital-to-Analog Converter AD1855 (U807)
2
ZERO
FLAG
DAC
DAC
OUTPUT
BUFFER
OUTPUT
BUFFER
1-30
ANALOG
OUTPUTS
SS-9 Main Unit Section
43
RFDC
42
CE
41
TE
40
SE
39
FE
38
VC
46
IGEN
51
RFAC
49
ASYI
48
ASYO
50
BIAS
17
XPCK
54
FILO
55
FILI
56
PCO
53
CLTV
26
MDP
25
LOCK
8
SENS
5
DATA
6
XLAT
7
CLK
12
SPOA
13
SPOB
14
XLON
20
SCOR
1
SQSO
2
SQCK
CLOCK
GENERATOR
EFM
DEMODULATOR
ERROR
CORRECTOR
D/A
INTERFACE
ASYMMETRY
CORRECTOR
DIGITAL
PLL
DIGITAL
CLV
CPU
INTERFACE
SUB CODE
PROCESSOR
SIGNAL PROCESSING BLOCK
SERVO BLOCK
SERVO
AUTO
SEQUENCER
16K
RAM
DIGITAL
OUT
SERVO
INTERFACE
SERIAL— IN
INTERFACE
OVER SAMPLING
DIGITAL FILTER
TIMING
LOGIC
PWM
3rd—ORDER
NOISE SHAPER
PWM
DAC BLOCK
36
TES1
35
TEST
3
XRST
79
RMUT
80
LMUT
66
XTAI
67
XTAO
+
+
—
—
+
+
—
—
OP AMP
ANALOG SW
A/D
CONVERTER
MIRR
DFCT
FOK
SERVO DSP
FOCUS SERVO
TRACKING
SERVO
SLED SERVO
PWM GENERATOR
FOCUS PWM
GENERATOR
TRACKING PWM
GENERATOR
SLED PWM
GENERATOR
70
AOUT1
71
AIN1
72
LOUT1
77
AOUT2
76
AIN2
75
LOUT2
60
DOUT
9
SCLK
21
COUT
27
SSTP
11
ATSK
22
MIRR
23
DFCT
24
FOK
32
FFDR
33
FRDR
30
TFDR
31
TRDR
28
SFDR
29
SRDR
DSP IC CXD2587Q (U102)
1-31
6.
BLOCK DIAGRAM
1-32
Fig. 6
SS-9 Main Unit Section
SS-9 Subwoofer Section
Subwoofer
Subwoofer Section
2-1
SS-9 Subwoofer Section
CONTENTS
1.
ELECTRICAL ADJUSTMENTS .........................................................................................................................2-2
1.2.
Adjustment Procedure ...........................................................................................................................2-3
2.
MECHANISM ASS'Y AND PARTS LIST ...........................................................................................................2-4
2.1.
Synthesis (Subwoofer) ...........................................................................................................................2-4
2.2.
PA Chassis Ass'y (A01) ........................................................................................................................2-5
3.
ELECTRICAL PARTS LIST ...............................................................................................................................2-6
3.1.
AMP P.C.B. Ass'y ..................................................................................................................................2-6
3.2.
REM P.C.B. Ass'y ..................................................................................................................................2-6
3.3.
Input P.C.B. Ass'y ..................................................................................................................................2-6
3.4.
PS P.C.B. Ass'y ..................................................................................................................................... 2-7
3.5.
PST P.C.B. Ass'y ................................................................................................................................... 2-7
3.6.
SP4P P.C.B. Ass'y .................................................................................................................................2-7
3.7.
T.PRI P.C.B. Ass'y .................................................................................................................................2-7
3.8.
T.SEC P.C.B. Ass'y ................................................................................................................................2-7
3.9.
Inlet P.C.B. Ass'y ................................................................................................................................... 2-7
3.10. VR P.C.B. Ass'y ..................................................................................................................................... 2-7
SPECIFICATIONS (See the end of this manual.)
SCHEMATIC DIAGRAM AND MOUNTING DIAGRAMS (See the separate volume.)
1.
ELECTRICAL ADJUSTMENTS
1.1. Parts Location for Electrical Adjustment
PST P.C.B. Ass’y
TP201
Idling Current — Rch
VR201
Idling Current — Subwoofer
VR701
TP701
TP101
Idling Current — Lch
VR101
Fig. 1.1
2-2
SS-9 Subwoofer Section
1.2. Adjustment Procedure
STEP ITEM
1 Preparation
SIGNAL
SOURCE
— —
OUTPUT
CONNECTION
2 Idling Current
Adjustment
— DC Milli-voltmeter between pins of Test Point
ADJUST-
—
REMARKS
MENT
1. Insert shorting plugs into input L/R jacks on the
Subwoofer unit.
2. Remove the PA Chassis.
3. Turn ON the power of the Subwoofer unit and allow 15 minutes before starting adjustment.
VR101
(Lch)
1. Connect the DC milli-voltmeter between pins of
TP101.
2. Adjust VR101 to obtain 4.4
±
1 mV on the DC milli-voltmeter.
VR201
(Rch)
1. Connect the DC milli-voltmeter between pins of
TP201.
2. Adjust VR201 to obtain 4.4
±
1 mV on the DC milli-voltmeter.
VR701
(Subwoofer)
1. Connect the DC milli-voltmeter between pins of
TP701.
2. Adjust VR701 to obtain 4.4
±
1 mV on the DC milli-voltmeter.
2-3
2.
MECHANISM ASS'Y AND PARTS LIST
2.1. Synthesis (Subwoofer)
SS-9 Subwoofer Section
L02
03
L03
01
L01
02
L01
Fig. 2.1
2.1. Subwoofer Synthesis
Schematic
Ref. No.
Part No.
—
Description
Synthesis (Subwoofer)
01
02
03
04
—
L01
L02
L03
CB00729A Subwoofer Grille Ass’y
CB00627A Subwoofer Speaker S800L05
0H08368D Power Amp Cover
— PA Chassis Ass’y (Subwoofer)
CB00634A Cord Ass’y Woofer
2E00133A Tapping 4x12 + Binding
0E03281A ST3x8 + Binding (Black)
0E04141A 4x6 + Pan Tapping
Q'ty
1
1
1
1
1
04 (A01)
PA Chassis Ass'y
2-4
2.2. PA Chassis Ass'y (A01)
L04
12
L05
09
L04
SS-9 Subwoofer Section
L04
01
L03
08
L01
02
05
06
L03
07
L01
03
L04
11
L01
L01
04
10
L02
L01
L02
2.2. PA Chassis Ass'y (A01)
Schematic
Ref. No.
Part No.
Description
A01
01
02
03
04
05
06
— PA Chassis Ass’y (Subwoofer)
Q'ty
1
BK10334A REM P.C.B. Ass’y DM (JPN)
BK10335A REM P.C.B. Ass’y Except DM
(Except JPN)
BK10343A Inlet P.C.B. Ass’y UL
(USA, CAN)
BK10344A Inlet P.C.B. Ass’y Except UL
(Except USA, CAN)
BK10340A Input P.C.B. Ass’y CE
(UK, AUS, EP, CH, HK, KR)
BK10341A Input P.C.B. Ass’y Except CE
(JPN, OTR, USA, CAN, DA, TW)
BK10332A SP4P P.C.B. Ass’y CE
(UK, AUS, EP, CH, HK, KR)
BK10333A SP4P P.C.B. Ass’y Except CE
(JPN, OTR, USA, CAN, DA, TW)
BK10336A T.PRI P.C.B. Ass’y CE
(UK, AUS, EP, CH, HK, KR)
BK10337A T.PRI P.C.B. Ass’y Except CE
1
1
1
1
1
1
1
1
(JPN, OTR, USA, CAN, DA, TW)
0B50367A Power Transformer DM (JPN)
0B50368A Power Transformer TW (TW)
0B50369A Power Transformer EP
(UK, AUS, EP, CH, HK, KR)
0B50370A Power Transformer UL (USA, CAN) 1
0B50472A Power Transformer DU/DA (OTR, DA) 1
1
1
1
1
1
Fig. 2.2
Schematic
Ref. No.
07
08
09
10
11
12
—
L01
L02
L03
L04
L05
Part No.
Description
BK10338A T.SEC P.C.B. Ass’y CE
(UK, AUS, EP, CH, HK, KR)
BK10339A T.SEC P.C.B. Ass’y Except CE
(JPN, OTR, USA, CAN, DA, TW)
BK10329A PS P.C.B. Ass’y
BK10328A AMP P.C.B. Ass’y
(JPN, DA)
BK10488A AMP P.C.B. Ass’y CE
(UK, OTR, AUS, EP, CH, HK, KR, TW)
BK10575A AMP P.C.B. Ass’y (USA, CAN)
0H07985A VR Knob
BK10345A VR P.C.B. Ass’y
BK10330A PST P.C.B. Ass’y CE
(UK, AUS, EP, CH, HK, KR)
BK10331A PST P.C.B. Ass’y Except CE
(JPN, OTR, USA, CAN, DA, TW)
BK10342A V.Selector P.C.B. Ass’y (OTR, DA)
0E03281A ST3x8 + Binding (Black)
0E03749A PT3x8 + Binding (Black)
0E03438A ST4x6 + Binding
0E00964A M3x5 + Binding (Chromate)
0E00877A ST3x5 + Binding
Q'ty
1
1
1
1
1
1
1
1
1
1
1
2-5
SS-9 Subwoofer Section
3.
ELECTRICAL PARTS LIST
NOTES: 1. Abbreviations
TR – Transistor, SID – Silicon Diode, ZD – Zener Diode, Varicap – Variable Capacitance Diode
RK – Carbon Resistor, RM – Metal Film Resistor, RF – Fail Safe Type Resistor,
RC – Cement Resistor, CE – Electrolytic Capacitor, CML – Mylar Capacitor,
CC – Ceramic Capacitor, CPP – PP Capacitor, CMM – Metalized Mylar Capacitor,
CSP – Polystyrene Capacitor, C – Mica Capacitor, CT – Tantalum Capacitor
2. Description of capacitor: 10 16V = 10
µ
16V
3. Parts marked with * show chip parts.
3.1. AMP P.C.B. Ass'y
Schematic
Ref. No.
Part No. Description
BK10328A AMP P.C.B. Ass’y
(JPN, DA)
BK10488A AMP P.C.B. Ass’y CE
(UK, OTR, AUS, EP,
CH, HK, KR, TW)
BK10575A AMP P.C.B. Ass’y
(USA, CAN)
U301,302 0B06146A IC NJM4558DD
U501 0B11246A IC UPC1237H
U801
U802
U803
IP401
0B10964A
0B17020A
0B17041A
0B11638A
IC
IC
IC
IC
PQ30RV31
NJM7818FA
NJM7918FA
IC Protector
ICP-N20 0.8A
IP801,802 0B11725A IC IC Protector
ICP-10 0.4A
IP803,804 0B11638A IC IC Protector
ICP-N20 0.8A
Q101
Q102
0B06142A
0B06142A
TR
TR
2SC2240
2SC2240
Q103
Q104
Q105
Q106
Q107
Q108
Q109
0B06142A
0B10221A
0B10199A
0B10222A
0B12915A
0B12914A
0B06142A
TR
TR
TR
TR
TR
TR
TR
2SC2240
2SA1145 Y
2SC3421
2SC2705 Y
TR 2SD2495
TR 2SB1626
2SC2240
Q210
Q501
Q701
Q702
Q703
Q704
Q705
Q706
Q707
Q708
Q110
Q201
Q202
Q203
Q204
Q205
Q206
Q207
Q208
Q209
0B10050A TR 2SA970BL
0B06142A TR 2SC2240
0B06142A TR 2SC2240
0B06142A TR 2SC2240
0B10221A TR 2SA1145 Y
0B10199A TR 2SC3421
0B10222A TR 2SC2705 Y
0B12915A TR TR 2SD2495
0B12914A TR TR 2SB1626
0B06142A TR 2SC2240
0B10050A TR 2SA970BL
0B06013A TR 2SA733
0B06142A TR 2SC2240
0B06142A TR 2SC2240
0B06142A TR 2SC2240
0B10221A TR 2SA1145 Y
0B10199A TR 2SC3421
0B10222A TR 2SC2705 Y
0B12859A TR 2SD2386
0B12861A TR 2SB1557
Q709
Q710
0B06142A TR 2SC2240
0B10050A TR 2SA970BL
Q801 0B10980A TR 2SD2531
Q802,803 0B06100A TR 2SC945
ZD301,302 0B12174A ZD RD12V JS B2
ZD501 0B12150A ZD RD5.6V JS B2
ZD801 0B12174A ZD RD12V JS B2
D101,102 0B12249A SID 1SS133
D103 0B12249A SID 1SS133
D201,202 0B12249A SID 1SS133
D203
D407
0B12249A
0B12249A
SID
SID
1SS133
1SS133
D501,502 0B12249A SID 1SS133
Schematic
Ref. No.
Part No. Description
D503,504 0B12249A SID 1SS133
D505
D601
0B12249A SID 1SS133
0B12249A SID 1SS133
D701,702 0B12249A SID 1SS133
D703 0B12249A SID 1SS133
D801,802 0B10900A SID 1S139
D803,804 0B10900A SID 1S139
T801
T801
0B50433A Sub Transformer DM/UL
(JPN, OTR, USA, CAN,
DA, TW)
0B50434A Sub Transformer EP/
L101
L201
L701
OTR (UK, AUS, EP, CH,
HK, KR)
0B50336A Coil 0.8uH
0B50336A Coil 0.8uH
0B50336A Coil 0.8uH
VR101
VR201
VR701
0B32188A Semi VR 200 Top
0B32188A Semi VR 200 Top
0B32188A Semi VR 200 Top
R118,119 0B09177R RF 47 1/4W
R120,121 0B24028A RF 0.22
1W
R128
R129
0B24388A
0B24122A
RF
RF
5.6
10
1W
2W
R218,219 0B09177R RF 47 1/4W
R220,221 0B24028A RF 0.22
1W
R228 0B24388A RF 5.6
1W
R229 0B24122A RF 10 2W
R507 0B24497R RF 100 2W
R718,719 0B09177R RF 47 1/4W
R720,721 0B09995A RF 0.22
2W
R728 0B24388A RF 5.6
1W
R729
R801
R830
0B24122A
0B20683A
RF
RF
10
1K
2W
1W
C105
0B21652A RK 4.7M
1/2W J
(USA, CAN)
0B41209A CPP 220P 100V J
C205
(UK, AUS, EP, CH, HK,
KR)
0B41209A CPP 220P 100V J (UK,
C705
AUS, EP, CH, HK, KR)
0B41209A CPP 220P 100V J (UK,
AUS, EP, CH, HK, KR)
C719,720 0B41278A CML 2200P 50V J (UK,
AUS, EP, CH, HK, KR)
F401 0B90830A Fuse RP 4A 125V
RL501,502 0B90904A Relay OSA-SS-224DM
TF101
TF201
TF501
TF701
TH501
W9000
0B90322A Thermal Fuse 126
0B90322A Thermal Fuse 126
0B90322A Thermal Fuse 126
0B90322A Thermal Fuse 126
2B10071A Thermistor 50KDD130
0J08437A Cool Sheet
3.2. REM P.C.B. Ass'y
Schematic
Ref. No.
Q804
Q851
ZD951
D601
C401
C401
CN801
RL601
TF901
Schematic
Ref. No.
C101
C101
C201
C201
C701
C701
PJ311
Part No. Description
BK10334A REM P.C.B. Ass’y DM
(JPN)
BK10335A REM P.C.B. Ass’y
Except DM
0B06100A
3.3. Input P.C.B. Ass'y
(Except JPN)
TR 2SC945
0B06429A TR 2SC2655
0B12168A ZD RD10V JS B2
0B12249A SID 1SS133
0B90936A Spark Killer
(Except JPN)
0B90961A Spark Killer 4700P
(JPN)
0B80668A DIN 13P Socket
0B90903A Relay SDT-S112LMR
0B90322A Thermal Fuse 126
Part No. Description
BK10340A Input P.C.B. Ass’y CE
(UK, AUS, EP, CH, HK,
KR)
BK10341A Input P.C.B. Ass’y
0B41288A
0B41517A
0B41288A
Except CE (JPN, OTR,
USA, CAN, DA, TW)
0B41517A CML 1000P 50V J
0B41288A
0B41517A
0B85352A
CML 0.015 50V J (UK,
AUS, EP, CH, HK, KR)
CML 1000P 50V J
(JPN, OTR, USA, CAN,
DA, TW)
CML 0.015 50V J (UK,
AUS, EP, CH, HK, KR)
(JPN, OTR, USA, CAN,
DA, TW)
CML 0.015 50V J (UK,
AUS, EP, CH, HK, KR)
CML 1000P 50V J
(JPN, OTR, USA, CAN,
DA, TW)
3P Pin Jack
2-6
SS-9 Subwoofer Section
3.4. PS P.C.B. Ass'y
Schematic
Ref. No.
Part No. Description
BK10329A PS P.C.B. Ass’y
D401,402 0B10520A GBU6D
D403,404 0B12836A SID 1SR35-400A
D405,406 0B12836A SID 1SR35-400A
C402,403 0B40910A CE 6800 35V
C404,405 0B40910A CE 6800 35V
C406 0B40893R CE 2200 25V
3.8. T.SEC P.C.B. Ass'y
Schematic
Ref. No.
Part No. Description
BK10338A T.SEC P.C.B. Ass’y CE
(UK, AUS, EP, CH, HK,
KR)
BK10339A T.SEC P.C.B. Ass’y
Except CE (JPN, OTR,
USA, CAN, DA, TW)
3.5. PST P.C.B. Ass'y
Schematic
Ref. No.
Part No. Description
BK10330A PST P.C.B. Ass’y CE
(UK, AUS, EP, CH,
HK, KR)
BK10331A PST P.C.B. Ass’y
Except CE (JPN,
OTR, USA, CAN, DA,
TW)
F402
F402
0B90828A Fuse RP 3A 125V (JPN,
OTR, USA, CAN, DA,
0B90867A
TW)
Fuse T 1.6A L250V (UK,
AUS, EP, CH, HK, KR)
3.9. Inlet P.C.B. Ass'y
Schematic
Ref. No.
Part No. Description
BK10343A Inlet P.C.B. Ass’y UL
(USA, CAN)
BK10344A Inlet P.C.B. Ass’y
Except UL
(Except USA, CAN)
D408,409 0B12836A SID 1SR35-400A
D410,411 0B12836A SID 1SR35-400A
F403 0B90840A Fuse F 300mA 250V
(JPN, OTR, USA, CAN,
F403
DA, TW)
0B90857A Fuse T 160mA L250V
(UK, AUS, EP, CH, HK,
KR)
0B85361A
0B85362A
AC Inlet (USA, CAN) (1)
AC Inlet
(Except USA, CAN) (1)
3.6. SP4P P.C.B. Ass'y
Schematic
Ref. No.
Part No. Description
BK10332A SP4P P.C.B. Ass’y CE
(UK, AUS, EP, CH,
HK, KR)
BK10333A SP4P P.C.B. Ass’y
Except CE (JPN, OTR,
USA, CAN, DA, TW)
3.10. VR P.C.B. Ass'y
Schematic
Ref. No.
C119,120 0B41278A CML 2200P 50V J
(UK, AUS, EP, CH, HK,
KR)
C219,220 0B41278A CML 2200P 50V J
(UK, AUS, EP, CH, HK,
CN611
KR)
0B85354A 4P Speaker Terminal
VR301
Schematic
Ref. No.
Part No. Description
BK10345A VR P.C.B. Ass’y
0B30214A
3.11. V. Selector P.C.B. Ass'y
Part No. Description
BK10342A V.Selector P.C.B.
Ass’y (OTR, DA)
0B70285A
VR50K(A)X2 14BLACK
Voltage Switch (OTR,
DA)
3.7. T.PRI P.C.B. Ass'y
Schematic
Ref. No.
Part No. Description
BK10336A T.PRI P.C.B. Ass’y CE
(UK, AUS, EP, CH, HK,
KR)
BK10337A T.PRI P.C.B. Ass’y
Except CE (JPN, OTR,
USA, CAN, DA, TW)
F401
F401
0B90830A Fuse RP 4A 125V (JPN,
OTR, USA, CAN, DA,
TW)
0B90868A Fuse T 2AL250V (UK,
AUS, EP, CH, HK, KR)
1
2
VCC 8
OVERLOAD
DET
ZERO LEVEL
DET
FLIP-FLOP
MUTE 7
LATCH/AUTO RESTORATION
SELECT
Vcc ON
MUTE
AC OFF
DET
RELAY
DRIVER
3 4
Amp. Protector
µ
PC1237H (U501)
5 GND
6
OUT
2-7
SS-9 Satellite Speaker Section
Satellite
Speaker
Satellite Speaker
Section
3-1
SS-9 Satellite Speaker Section
CONTENTS
1.
MECHANISM ASS'Y AND PARTS LIST ........................................................................................................... 3-2
1.1.
Satellite Ass'y (Front/Rear) ..................................................................................................................... 3-2
SPECIFICATIONS (See the end of this manual.)
1.
MECHANISM ASS'Y AND PARTS LIST
1.1. Satellite Ass'y (Front/Rear)
04
03
01
02
03
Fig. 1.1
1.1. Satellite Ass'y (Front/Rear)
Schematic
Ref. No.
Part No.
—
Description
Satellite Ass'y (Front/Rear)
01
02
03
04
05
06
07
08
09
10
L01
L02
L03
L04
CB00689A Satellite Grille Ass’y
CB00638A Satellite Tweeter
CB00637A Satellite Woofer Speaker S350F02
0H08822C Stand Holder Speaker
0J08722A S Holder Fix Plate
0H08796B Stand Pole
0H08791D Base Joint
0H08794B Stand Base Speaker L
0H08795B Stand Base Speaker R
0J08794A Base Cushion Speaker S
0E04243A PT4x8 + Binding
0E03753A M4x8 + Countersunk
0E04323A BT4x10 + Oval Countersunk
0E03972A BT4x12 + Binding
Q'ty
1
1
2
1
1
1
1
2
1
1
3-2
L04
10
L02
L03
06
07
08
05
L01
L02
L03
09
L04
10
SPECIFICATIONS
●
CD Player Section
Outputs (SONY TYPE-3) (1 kHz, 0 dB)
Rec Output Level .................................. 2.0 V
±
2 dB (Tr. No. 1)
Total Harmonic Distortion + Noise (SONY TYPE-3)
1 kHz 0 dB ............................................ Less than 0.006% (Tr. No. 1)
Frequency Response (SONY TYPE-3)
20 Hz - 20 kHz ...................................... 0 dB
±
2 dB
Channel Separation (SONY TYPE-3)
1 kHz 0 dB ........................................... More than 75 dB (Tr. No. 30,34)
Signal to Noise Ratio (SONY TYPE-3) ..... More than 95 dB (Tr. No. 23)
De-emphasis (SONY TYPE-3)
1 kHz .................................................. -0.4 dB
±
2 dB (Tr. No. 39)
5 kHz .................................................. -4.5 dB
±
2 dB (Tr. No. 40)
16 kHz .................................................. -9 dB
±
2 dB (Tr. No. 41)
Dynamic Range
1 kHz -60 dB ......................................... More than 95 dB (Tr. No. 20)
●
FM Tuner Section
[Standard Test Condition (S.T.C.)]
RF input levels are given re 75 Ohms Antenna Terminal, 1 kHz, 65 dBf
Modulation ............................................ MONO: 100%, Stereo: Pilot 10%, audio 90%
RF Frequency ....................................... USA, CAN, OTR, EP 98.1 MHz
JPN
Tuning Range ....................................... USA, CAN
83.0 MHz
87.5 - 107.9 MHz 200 kHz steps
JPN 76.0 - 90.0 MHz 100 kHz steps
OTR, EP, HK, TW 87.5 - 108.0 MHz 50 kHz steps
Mono Section
Usable Sensitivity (THD 3%) (19 kHz L.P.F.)
JPN, USA, CAN ....................... Less than 22 dB
µ
V
EP, OTR ................................... Less than 20 dB
µ
V
Quieting Sensitivity (S/N = 50 dB) (19 kHz L.P.F.)
JPN, USA, CAN ....................... Less than 27 dB
µ
V
EP, OTR ................................... Less than 25 dB
µ
V
Output Level .............................................. 700 mV
±
3 dB
Signal to Noise Ratio (19 kHz L.P.F.) ....... More than 65 dB
Distortion (19 kHz L.P.F.) .......................... Less than 1.0%
Frequency Response (@1 kHz 0 dB without IHF-Filter)
30 Hz ........................................ 0 dB
±
3 dB
15 kHz ...................................... -15 dB
±
3 dB
Seek Stop Level ........................................ Within 16 dB
µ
V to 34 dB
µ
V
Stereo Section
Stereo Separation (1 kHz) (19 kHz L.P.F.)
JPN, USA, CAN ....................... More than 25 dB
EP, OTR ................................... More than 34 dB
Signal to Noise Ratio ................................ More than 60 dB
Distortion ................................................... Less than 1.5%
SS-9 Specifications
SPEC-1
●
AM Tuner Section
[Standard Test Condition (S.T.C.)]
RF input levels are given by Loop Antenna, 90 dB/m
Modulation ............................................ 30% mod., 400 Hz
RF Frequency ....................................... U.S.A. Band - 1000 kHz
Europe Band - 999 kHz
Tuning Range ....................................... USA, CAN 530 kHz - 1710 kHz 10 kHz step
EP 531 kHz - 1602 kHz 9 kHz step
JPN 522 kHz - 1629 kHz 9 kHz step
Usable Sensitivity (S/N = 20 dB) ............... Less than 58 dB
µ
Output Level (Rec Out) ............................. 200 mV
±
4 dB
Signal to Noise Ratio (@0 dB = "Above Output Level")
................................................. More than 43 dB
Distortion ................................................... Less than 2.0%
Frequency Response (@400 Hz 0 dB without Filter)
50 Hz ........................................ More than -15 dB
3 kHz ........................................ More than -18 dB
Seek Stop Level ........................................ Within 45 dB
µ
V to 66 dB
µ
V
●
Pre Amplifier Section
[Standard Test Condition (S.T.C.)]
Signal .................................................... 1 kHz
Input AUX ......................................... 200 mV
Output Pre out ..................................... 1000 mV
Sensitivity (Output 1000mV)
Satellite 1 kHz .................................. 150 mV
±
2 dB
Subwoofer 20 Hz .................................. 84 mV
±
2 dB
Signal to Noise Ratio (Input Shorted) ....... More than 95 dB (A-WTD)
Frequency Response (Satellite, Ref. 1 kHz)
Satellite 300 Hz to 3 kHz .................. 0 dB
±
2 dB
60 Hz .................................. -12 dB
±
2 dB
20 kHz ................................ +4 dB
±
2 dB
Subwoofer 30 Hz .................................. +5 dB
±
2 dB
300 Hz ................................ -12 dB
±
2 dB
Distortion ................................................... Less than 0.01%
Separation 1 kHz ................................. More than 74 dB
Tone Control (Output 1000 mV)
Bass Subwoofer 20 Hz ............ +10 dB
±
2 dB
-10 dB
±
2 dB
Treble 20 kHz ........................... +10 dB
±
2 dB
-10 dB
±
2 dB
Loudness (VR: 30)
Subwoofer 20 Hz .................................. +10 dB
±
3 dB
Satellite 20 kHz ................................ +6 dB
±
3 dB
SPEC-2
SS-9 Specifications
Output (Input 200 mV)
Remote 1 kHz .................................. 200 mV
±
2 dB
Rec Out 1 kHz .................................. 200 mV
±
2 dB
Maximum Output Level
1% THD ................................................
More than 7 V
●
Power Amplifier Section
[Standard Test Condition (S.T.C.)]
Signal .................................................... 1 kHz
Output ................................................... 1 W
Output Power (1 ch driven, 1 kHz)
Satellite 4 Ohms Load ...................... More than 30 W at 0.1% Dist.
Woofer 4 Ohms Load ...................... More than 50 W at 0.1% Dist.
Frequency Response
20 Hz to 20 kHz ....................... 0 dB
±
2 dB
Distortion (at Rated Power)
20 Hz to 20 kHz ....................... Less than 0.3%
Signal to Noise Ratio (at Rated Power) .... More than 95 dB
Input Sensitivity (at Rated Power)
Satellite ................................................. 850 mV
±
2 dB
Subwoofer ............................................ 1100 mV
±
2 dB
●
Satellite Speaker Unit
Enclosure .................................................. 2-way sealed type
Speaker Unit
Midrange/Woofer .................................. 8-cm round cone
×
2
Tweeter ................................................. 2.5-cm semi-dome
Impedance ................................................ 4 ohms
Rated Power Handling .............................. 30 W
Maximum Power Handling ........................ 50 W
●
Remote Control Unit
Principle .................................................... Infrared pulse system
Power Supply ............................................ 3 VDC (1.5 V
×
2)
Dimensions*
Main Remote Control ............................ 65 (W)
×
29 (H)
×
182 (D) mm
2-9/16 (W)
×
1-1/8 (H)
×
7-5/32 (D) inches
Sub Remote Control ............................. 49 (W)
×
26 (H)
×
110 (D) mm
1-15/16 (W)
×
1 (H)
×
4-5/16 (D) inches
Mass
Main Remote Control ............................ Approx. 100 g, 3.5 oz. (including batteries)
Sub Remote Control ............................. Approx. 60 g , 2.1 oz. (including batteries)
●
General
Power Requirements
U.S.A. model ........................................ AC120V
Europe model ....................................... AC230V
60 Hz
50/60 Hz
SPEC-3
SS-9 Specifications
OTR model ........................................... AC110-120/220-240V 50/60 Hz
JPN model ............................................ AC100V
Power Consumption .................................. 280 W max.
50/60 Hz
Dimensions*
Main unit ............................................... 523 (W)
×
523 (H)
×
115 (D) mm
20-5/8 (W)
×
20-5/8 (H)
×
4-1/2 (D) inches
Main Unit (with tabletop stand) ............. 523 (W)
×
622 (H)
×
215 (D) mm
20-5/8 (W)
×
24-1/2 (H)
×
8-1/2 (D) inches
Main Unit (with floor stand) ................... 523 (W)
×
1,173 (H)
×
330 (D) mm
20-5/8 (W)
×
46-3/16 (H)
×
13 (D) inches
Subwoofer/Power Amplifier .................. 380 (W)
×
491 (H)
×
355 (D) mm
15 (W)
×
19-3/8 (H)
×
14 (D) inches
Satellite Speaker .................................. 120 (W)
×
347 (H)
×
116 (D) mm
4-3/4 (W)
×
13-11/16 (H)
×
4-9/16 (D) inches
Satellite Speaker (with tabletop stand) . 186 (W)
×
453 (H)
×
160 (D) mm
7-5/16 (W)
×
17-7/8 (H)
×
6-5/16 (D) inches
Satellite Speaker (with floor stand) ....... 332 (W)
×
1,173 (H)
×
260 (D) mm
13-1/16 (W)
×
46-3/16 (H)
×
10-1/4 (D) inches
Mass
Main Unit .............................................. Approx. 10 kg, 22 lbs. 1 oz.
Main Unit (with tabletop stand) ............. Approx. 11.5 kg, 25 lbs., 6 oz.
Main Unit (with floor stand) ................... Approx. 14 kg, 30 lbs., 14 oz.
Subwoofer/Power Amplifier .................. Approx. 19 kg, 41 lbs., 14 oz.
Satellite Speaker .................................. Approx. 2.8 kg, 6 lbs., 3 oz.
Satellite Speaker (with tabletop stand) . Approx. 3.7 kg, 8 lbs., 3 oz.
Satellite Speaker (with floor stand) ....... Approx. 6.7 kg, 14 lbs., 12 oz.
Supplied Accessories ................................ Control cable
×
1
3-P RCA pin plug cable
×
1
Speaker cable
×
2
Cable stopper
×
1
AM loop antenna
×
1
Dipole antenna
×
1
Antenna adapter
×
1
IEC R03 (size AAA) battery
×
4
Main unit tabletop stand
×
1
Satellite speaker tabletop stand
×
2
Main unit floor stand
×
1
Satellite speaker floor stand
×
2
M5x30 screw
×
2
M5x20 screw
×
4
Top cover
×
1
For main unit
Tabletop stand rear cover
×
1
For satellite speaker
Tabletop stand rear cover
×
2
SPEC-4
SS-9 Specifications
For main unit
Floor stand rear cover
×
1
For satellite speaker
Floor stand rear cover
×
2
Floor stand base cover
×
1
Speaker cushion
×
2
Main unit installation fittings
×
2
M5x20 tapping screw
×
2
Satellite speaker installation screw
×
4
Template
×
1
* Dimensions do not include protruding parts. Height is the panel height.
• Specifications and design are subject to change for further improvement without notice.
Nakamichi Corporation
Nakamichi America
Nakamichi Asia
Nakamichi Europe
Web Site
0Q06270A
1-153 Suzukicho, Kodaira, Tokyo 187-8501, Japan Phone: 81 (42) 342-1111
18375 S Broadwick Street Rancho Dominguez, CA 90220
Phone: 1 (310) 631-2122 Fax: 1 (310) 631-2760
8/F The Grande Bldg., 398 Kwun Tong Rd., Kowloon, Hong Kong
Phone: 852-2357-6690 Fax: 852 -2357-6697
8th Floor, Hayes Gate House, 27 Uxbridge Road Hayes, Middlesex, UB4 OJN, England
Phone: 44-181-581-9191 Fax: 44-181-581-9153 http://www.nakamichi.com
SPEC-5
G-00120PA
SS-9
Main Unit Section - Main P.C.B. Ass’y
SS-9
SS
SS-9
(1/4)
SS-9
SS-9
Main Unit Section - CD P.C.B. Ass’y
SS-9
SS-9
(2/4)
SS-9
SS-9
Main Unit Section - Front P.C.B. Ass’y
SS-9
SS-9
(3/4)
SS-9
SS-9
Subwoofer Section
SS-9
SS-9
(4/4)
SS-9
advertisement
Key Features
- CD player
- AM/FM tuner
- Built-in subwoofer
- Preset stations
- Random playback
- Track search
- Repeat functions