Psion Teklogix 7530 Hand-Held Computer handheld computer User Manual
PDF
Dokument
Annons
Annons
7530 Hand-Held Computer User Manual December 2, 2004 ISO 9001 Certified Quality Management System Part No. 8000007.B © Copyright 2003 by Psion Teklogix Inc., Mississauga, Ontario This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc. All trademarks are the property of their respective holders. Return-To-Factory Warranty Psion Teklogix warrants a return-to-factory warranty for a period of one year from shipment. The warranty on Psion Teklogix manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an authorized Psion Teklogix service organization. See Psion Teklogix terms and conditions of sale for full details. Service When requesting service, please provide information concerning the nature of the failure and the manner in which the equipment was used when the failure occurred. Type, model, and serial number should also be provided. Before returning any products to the factory, call the Customer Services Group for a Return Authorization number. Support Services Psion Teklogix provides a complete range of product support services to its customers. In North America, these services can be accessed through the Psion Teklogix Helpdesk. The Helpdesk coordinates repairs and training, helps you to troubleshoot problems over the phone and arranges for technicians or engineers to come to your site. For contact information and a listing of worldwide offices, please refer to Appendix A: Support Services And Worldwide Offices. Disclaimer Every effort has been made to make this material complete, accurate and up-to-date. Teklogix Inc. reserves the right to make changes without notice and shall not be held responsible for damages resulting from reliance on the material presented in this manual. PROGRAM LICENSE AGREEMENTS Microsoft's End User License Agreement You have acquired a device (“DEVICE”) that includes software licensed by Psion Teklogix Inc. from Microsoft Licensing Inc. or its affiliates (‘MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved. IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (“EULA”), DO NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT PSION TEKLOGIX INC. FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT). GRANT OF SOFTWARE LICENSE. This EULA grants you the following license: • You may use the SOFTWARE only on the DEVICE. • NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT. PSION TEKLOGIX INC. HAS INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS RELIED UPON PSION TEKLOGIX INC. TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE. • NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided “AS IS” and with all faults. THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST Psion Teklogix 7530 Hand-Held Computer User Manual I License Agreement INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS. II • Note on Java Support. The SOFTWARE may contain support for programs written in Java. Java technology is not fault tolerant and is not designed, manufactured, or intended for use or resale as online control equipment in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of Java technology could lead directly to death, personal injury, or severe physical or environmental damage. Sun Microsystems, Inc. has contractually obligated MS to make this disclaimer. • No Liability for Certain Damages. EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.OO). • Limitations on Reverse Engineering, Decompilation, and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation. • SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS. You may permanently transfer rights under this EULA only as part of a permanent sale or transfer of the Device, and only if the recipient agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must also include all prior versions of the SOFTWARE. • EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments. For additional information see http://www.microsoft.com/exporting/. Psion Teklogix 7530 Hand-Held Computer User Manual License Agreement Meetinghouse Data Communications, Inc. End User License Agreement End User License Agreement: ATTENTION: PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("LICENSE") CAREFULLY BEFORE INSTALLATION. USE OF THE SOFTWARE IS SUBJECT TO THE SOFTWARE LICENSE TERMS SET FORTH BELOW. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND. IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT, YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR A FULL REFUND. Software License Terms: The following terms govern your use of the enclosed Software unless you have a separate written agreement with Meetinghouse Data Communications, Inc. herein also known as “MDC”. License Grant: MDC grants you a non-exclusive and non-transferable license to Use one copy of the Software. "Use" means storing, loading, installing, executing or displaying the Software. “Software” means software, documentation and any fonts accompanying this License whether on disk, in read only memory, on any other media or in any other form. You may not modify the Software or disable any licensing or control features of the Software. If the Software is licensed for "concurrent use", you may not allow more than the maximum number of authorized users to Use the Software concurrently. The Software is licensed as a "Shareware" version, on one computer only. You may use the Software distributed and licensed as Shareware on a trial basis only. The shareware version of the Software may be distributed freely without any associated fees to other parties who wish to try the software as long as the Software is distributed within an exact copy of the original MDC self-extracting installation file. In other words, nothing may be left out of the Shareware as distributed on MDC's web site at http://www.mtghouse.com. Psion Teklogix 7530 Hand-Held Computer User Manual III License Agreement All permanent licenses are prepaid and the Software is licensed to you by MDC. You own the media on which the Software is recorded but MDC and/or MDC’s licensor(s) retain title to the Software. The Software and any copies which this License authorizes you to make are subject to this License. Permitted Uses and Restrictions: This License allows you to install and use the Software on a single computer at a time. This License does not allow the Software to exist on more than one computer at a time. You may make one copy of the Software in machine-readable form for backup purposes only. The backup copy must include all copyright information contained on the original. Except as expressly permitted in this License, you may not, in whole or part, decompile, reverse engineer, disassemble, modify, rent, lease, loan, sublicense, distribute or create derivative works based upon the Software, or transmit the Software over a network. You may not copy the Software onto any bulletin board or similar system. You agree that you will not utilize any information obtained from MDC or obtained or learned in the course of using the Software, to develop or improve technology with similar functionality to the Software, nor will you directly or indirectly assist any other party in doing so. You further agree that you will not separate the various modules of the software for their different purposes, if any. High Risk Activities: The Software is not fault-tolerant and is not designed, manufactured or intended for use or resale as on-line control equipment in hazardous environments requiring failsafe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the Software could lead directly to death, personal injury, or severe physical or environmental damage ("High Risk Activities"). Accordingly, MDC and its suppliers specifically disclaim any express or implied warranty of fitness for High Risk Activities. You agree that MDC and its suppliers will not be liable for any claims or damages arising from the use of the Software in such applications. Ownership: The Software is licensed, not sold. The Software is owned and copyrighted by MDC or its third party suppliers. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software. You acknowledge such ownership and intellectual property rights and will not take any action to jeopardize, limit or interfere in any manner with MDC's or its suppliers' ownership of or rights with respect IV Psion Teklogix 7530 Hand-Held Computer User Manual License Agreement to the Software. The Software is protected by copyright and other intellectual property laws and by international treaties. MDC's third party suppliers may protect their rights in the event of any violation of these License Terms. Termination: Your rights under this License will terminate automatically without notice from MDC if you fail to comply with any term(s) of this License. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form. U.S. Government Restricted Rights: The Software and documentation have been developed entirely at private expense and are provided as "Commercial Computer Software" or "restricted computer software". They are delivered and licensed as "commercial computer software" as defined in DFARS 252.227-7013 (Oct 1988), DFARS 252.211-7015 (May 1991) or DFARS 252.227-7014 (Jun 1995), as a "commercial item" as defined in FAR 2.101 (a), or as "Restricted computer software" as defined in FAR 52.227-19 (Jun 1987) (or any equivalent agency regulation or contract clause), whichever is applicable. You have only those rights provided for such Software and Documentation by the applicable FAR or DFARS clause or the MDC standard software agreement for the product. Export Law Assurances: You may not use or otherwise export or reexport the Software except as authorized by United States law and the laws of the jurisdiction in which the Software was obtained. In particular, but without limitation, the Software may not be exported or reexported (i) into (or to a national or resident of) any U.S. embargoed country or (ii) to anyone on the U.S. Treasury Department's list of Specially Designated Nationals or the U.S. Department of Commerce's Table of Denial Orders. By using the Software, you represent and warrant that you are not located in, under control of, or a national or resident of any such country or on any such list. Limited Warranty on Media: (if applicable) MDC warrants the media on which the Software is recorded to be free from defects in materials and workmanship under normal use for a period of ninety (90) days from the date of original retail purchase. Your exclusive remedy under this paragraph shall be, at MDC's option, a refund of the purchase price of the product containing the Software or replacement of the Software which is returned to MDC or a Psion Teklogix 7530 Hand-Held Computer User Manual V License Agreement MDC authorized representative with a copy of the receipt. THIS LIMITED WARRANTY AND ANY IMPLIED WARRANTIES ON THE MEDIA INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO NINETY (90) DAYS FROM THE DATE OF ORIGINAL RETAIL PURCHASE. SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU. THE LIMITED WARRANTY SET FORTH HEREIN IS EXCLUSIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. LICENSOR SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY BY JURISDICTION. Disclaimer of Warranty on Software: You expressly acknowledge and agree that use of the Software is at your sole risk. The Software is provided "AS IS" and without warranty of any kind and MDC and MDC’s licensor(s) (for the purposes of warranty and liability, MDC and MDC's licensor(s) shall be collectively referred to as "MDC") EXPRESSLY DISCLAIM ALL WARRANTIES AND/OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY OR SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. LICENSOR DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. FURTHERMORE, LICENSOR DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE OR RELATED DOCUMENTATION IN TERMS OF THEIR CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY LICENSOR OR AN LICENSOR AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT LICENSOR OR AN LICENSOR AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WAR- VI Psion Teklogix 7530 Hand-Held Computer User Manual License Agreement RANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THE TERMS OF THIS DISCLAIMER DO NOT AFFECT OR PREJUDICE THE STATUTORY RIGHTS OF A CONSUMER ACQUIRING LICENSOR PRODUCTS OTHERWISE THAN IN THE COURSE OF A BUSINESS, NEITHER DO THEY LIMIT OR EXCLUDE ANY LIABILITY FOR DEATH OR PERSONAL INJURY CAUSED BY LICENSOR’S NEGLIGENCE. Limitation of Liability: UNDER NO CIRCUMSTANCES, EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, INCLUDING NEGLIGENCE, SHALL LICENSOR, ITS SUBSIDIARIES, AFFILIATES, OR SUPPLIERS BE LIABLE FOR ANY DIRECT, INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS) ARISING OUT OF OR RELATING TO THIS LICENSE, THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE SOFTWARE, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall MDC's total liability to you for all damages exceed the price paid for the license to use the Software, regardless of the form of the claim. Government End Users: If the Software is supplied to the United States Government, the Software is classified as "restricted computer software" as defined in clause 52.227-19 of the FAR. The United States Government's rights to the Software are as provided in clause 52.227-19 of the FAR. Controlling Law and Severability: This License shall be governed by the laws of the United States and the State of New Hampshire. As to any dispute relating to this License or the Software, you further agree to jurisdiction and venue in the Federal and State Courts located in the State of New Hampshire. If for any reason a court of competent jurisdiction finds any provision, or portion thereof, to be unenforceable, the remainder of this License shall continue in full force and effect. Acknowledgement: Your use of any software produced by MDC is based only on your acknowledgement that you have read this License, understand it, and agree to be bound by its terms and conditions. Psion Teklogix 7530 Hand-Held Computer User Manual VII License Agreement MDC Acknowledgments: This product includes software developed by MDC and its licensors. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)". This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson ([email protected]). Complete Agreement: This License constitutes the entire agreement between the parties with respect to the use of the Software and supersedes all prior or contemporaneous understandings regarding such subject matter. No amendment to or modification of this License will be binding unless in writing and signed by MDC. NOTE: EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF THE SOFTWARE TO YOU. Meetinghouse Data Communications, Inc. 150 Greenleaf Avenue, Unit F Portsmouth, NH 03801 Revised 8/12/2002 VIII Psion Teklogix 7530 Hand-Held Computer User Manual TABLE OF CONTENTS Program License Agreements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I Approvals And Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . . .xiii Chapter 1: Introduction 1.1 1.2 1.3 About This Manual . . . . . . . . . . . Text Conventions . . . . . . . . . . . . About The 7530 Hand-Held Computer . 1.3.1 Features. . . . . . . . . . . . . . 1.3.2 The 7530 Hand-Held Computer . 1.3.3 Regulatory Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4 5 5 7 9 Preparing The 7530 For Operation . . . . . . . . . . . . . . . . 2.1.1 Equipment You Need To Get Started . . . . . . . . . . . 2.1.2 Charging The Battery . . . . . . . . . . . . . . . . . . . 2.1.3 Attaching Carrying Accessories . . . . . . . . . . . . . . 2.1.3.1 Attaching The Hand Strap . . . . . . . . . . . . 2.1.3.2 Attaching The Pistol Grip . . . . . . . . . . . . Powering Up The 7530 And Configuring The Radio . . . . . . . 2.2.1 Installing The Battery And Switching The 7530 On. . . . 2.2.2 Configuring An IEEE 802.11 Radio Installed In The 7530 2.2.3 Assigning An IP Address . . . . . . . . . . . . . . . . . 2.2.4 Name Servers Tab . . . . . . . . . . . . . . . . . . . . . 2.2.5 Advanced Features . . . . . . . . . . . . . . . . . . . . . 2.2.5.1 Rearranging Preferred Networks . . . . . . . . 2.2.5.2 Deleting A Preferred Network . . . . . . . . . . 2.2.5.3 Changing Network Properties . . . . . . . . . . Checking The Scanner . . . . . . . . . . . . . . . . . . . . . . Using Microsoft® ActiveSync® To Work With Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 .13 .13 .13 .14 .15 .16 .17 .18 .24 .25 .26 .26 .27 .27 .27 .27 Chapter 2: Basic Checkout 2.1 2.2 2.3 2.4 Psion Teklogix 7530 Hand-Held Computer User Manual i Contents 2.5 2.6 Calibrating The Touchscreen . . . . . . . . . . . . . . . . . . . . . . 28 Resetting The 7530 Hand-Held . . . . . . . . . . . . . . . . . . . . . 28 Chapter 3: Getting To Know Your 7530 3.1 3.2 3.3 3.4 3.5 3.6 3.7 ii Features Of The 7530 . . . . . . . . . . . . . . . . . . . . . . . The Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.1 Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . 3.2.2 Removing And Installing The Battery Pack . . . . . . . . 3.2.3 Charging The Battery . . . . . . . . . . . . . . . . . . . . Switching The 7530 Hand-Held On And Off . . . . . . . . . . . The Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4.1 Modifier Keys. . . . . . . . . . . . . . . . . . . . . . . . 3.4.1.1 Activating Modifier Keys. . . . . . . . . . . . . 3.4.1.2 Locking Modifier Keys. . . . . . . . . . . . . . 3.4.2 The Keys . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4.3 The 58-Key Keyboard . . . . . . . . . . . . . . . . . . . 3.4.4 The 36-Key Keyboard . . . . . . . . . . . . . . . . . . . 3.4.5 The Keypad Backlight . . . . . . . . . . . . . . . . . . . The Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5.1 Adjusting The Display Backlight . . . . . . . . . . . . . . 3.5.2 Adjusting The Contrast . . . . . . . . . . . . . . . . . . . 3.5.3 Calibrating The Touchscreen . . . . . . . . . . . . . . . . 7530 Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6.1 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6.1.1 Charge LED . . . . . . . . . . . . . . . . . . . 3.6.1.2 Radio Traffic LED . . . . . . . . . . . . . . . . 3.6.1.3 Scan LED. . . . . . . . . . . . . . . . . . . . . 3.6.1.4 User Application LED . . . . . . . . . . . . . . 3.6.2 Onscreen Indicators . . . . . . . . . . . . . . . . . . . . . 3.6.3 Audio Indicators . . . . . . . . . . . . . . . . . . . . . . 3.6.3.1 Adjusting The Beeper Volume . . . . . . . . . . Internal Scanners. . . . . . . . . . . . . . . . . . . . . . . . . . 3.7.1 Scanning Techniques . . . . . . . . . . . . . . . . . . . . 3.7.2 Scan LED Indicators . . . . . . . . . . . . . . . . . . . . 3.7.3 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . 3.7.4 Operating One Dimensional (1D) Internal Laser Scanners. 3.7.5 Operating Internal PDF Laser Scanners . . . . . . . . . . Psion Teklogix 7530 Hand-Held Computer User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 32 32 32 33 34 35 35 36 36 36 37 38 40 40 40 41 41 42 42 43 44 44 44 45 47 48 48 49 49 50 50 51 Contents 3.7.6 Operating Internal Two Dimensional (2D) Imager Scanners Connecting & Disconnecting Tethered Peripherals . . . . . . . . . Monitoring The Battery And Maximizing Run Time . . . . . . . . 3.9.1 Storing Batteries . . . . . . . . . . . . . . . . . . . . . . . 3.10 Monitoring The Network Connection. . . . . . . . . . . . . . . . 3.11 Uploading Data In A Docking Station . . . . . . . . . . . . . . . 3.12 General Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 3.12.1 Caring For The Touchscreen . . . . . . . . . . . . . . . . . 3.12.2 Cleaning The 7530 . . . . . . . . . . . . . . . . . . . . . . 3.8 3.9 . . . . . . . . . . . . . . . . . . .51 .52 .53 .55 .55 .56 .56 .56 .57 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 .61 .62 .63 .64 .65 .66 .66 .67 .68 .68 .69 .70 .71 .71 .71 .72 .73 .74 .75 .76 Chapter 4: Working With Windows CE 4.1 4.2 4.3 4.4 4.5 Navigating In Windows CE And Applications . . . . 4.1.1 Navigating Using A Touchscreen And Stylus . 4.1.2 Navigating Using The Keyboard. . . . . . . . Working With Files, Folders And Programs . . . . . The Startup Desktop. . . . . . . . . . . . . . . . . . 4.3.1 The Desktop Icons . . . . . . . . . . . . . . . 4.3.2 The Taskbar . . . . . . . . . . . . . . . . . . 4.3.2.1 Using The Taskbar . . . . . . . . . . 4.3.2.2 Customizing The Taskbar . . . . . . The Start Menu . . . . . . . . . . . . . . . . . . . . 4.4.1 The Desktop . . . . . . . . . . . . . . . . . . 4.4.2 Security Settings . . . . . . . . . . . . . . . . 4.4.3 The System Tray . . . . . . . . . . . . . . . . 4.4.4 The Task Manager . . . . . . . . . . . . . . . 4.4.5 Cycle Tasks. . . . . . . . . . . . . . . . . . . 4.4.6 Power Info . . . . . . . . . . . . . . . . . . . 4.4.7 Programs . . . . . . . . . . . . . . . . . . . . 4.4.8 Settings . . . . . . . . . . . . . . . . . . . . . 4.4.9 Run . . . . . . . . . . . . . . . . . . . . . . . 4.4.10 Shutdown . . . . . . . . . . . . . . . . . . . . Using A Dialogue Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 5: Configuration 5.1 5.2 Remote Desktop Connection . . . . . . . . . . . . . . . . . . . . . . .83 Pocket PC Compatibility . . . . . . . . . . . . . . . . . . . . . . . . .83 Psion Teklogix 7530 Hand-Held Computer User Manual iii Contents iv 5.3 5.4 5.5 The Control Panel . . . . . . . . . . . . . . . . Control Panel Icons . . . . . . . . . . . . . . . Basic Setup. . . . . . . . . . . . . . . . . . . . 5.5.1 Display Properties. . . . . . . . . . . . . 5.5.1.1 Display Contrast . . . . . . . . 5.5.1.2 Display Backlight . . . . . . . 5.5.1.3 Display Appearance . . . . . . 5.5.2 Keyboard Properties . . . . . . . . . . . 5.5.2.1 Key Repeat . . . . . . . . . . . 5.5.2.2 Keyboard Backlight . . . . . . 5.5.2.3 Keyboard One Shot Modes. . . 5.5.2.4 Keyboard Macro Keys . . . . . 5.5.2.5 Unicode Mapping . . . . . . . 5.5.3 Volume And Sound Properties . . . . . . 5.5.3.1 Volume Adjustments . . . . . . 5.5.4 Power Management Properties . . . . . . 5.5.4.1 Battery Capacity . . . . . . . . 5.5.4.2 Power Saving Schemes. . . . . 5.5.4.3 Suspend Threshold . . . . . . . 5.5.4.4 Charger Details . . . . . . . . . 5.5.5 Stylus Properties . . . . . . . . . . . . . 5.5.5.1 Setting Double-Tap Sensitivity . 5.5.5.2 Touchscreen Calibration . . . . 5.5.6 Certificate Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 . 84 . 88 . 88 . 88 . 89 . 91 . 92 . 92 . 93 . 94 . 95 . 97 . 99 . 99 .100 .100 .101 .102 .103 .103 .104 .104 .105 5.7 Scanner Properties Setup . . . . . . . . 5.7.1 Scanner Options. . . . . . . . . . 5.7.2 Bar Codes . . . . . . . . . . . . . 5.7.2.1 Code 39 Settings . . . . 5.7.2.2 Code 128 Settings . . . 5.7.2.3 EAN 13 Settings . . . . 5.7.2.4 EAN 8 . . . . . . . . . 5.7.2.5 UPC And EAN Settings 5.7.2.6 UPC A Settings . . . . . 5.7.2.7 UPC E Settings . . . . . 5.7.2.8 Codabar. . . . . . . . . 5.7.2.9 Code 93 . . . . . . . . . 5.7.2.10 Code 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 .118 .121 .122 .124 .125 .126 .127 .127 .127 .128 .128 .128 Psion Teklogix 7530 Hand-Held Computer User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contents 5.8 5.7.2.11 Interleaved 2 of 5 . . . . . . . . . . . 5.7.2.12 MSI Plessey . . . . . . . . . . . . . . 5.7.2.13 Discrete 2 of 5 . . . . . . . . . . . . . 5.7.2.14 IATA 2 of 5 . . . . . . . . . . . . . . 5.7.2.15 Postal: Australian . . . . . . . . . . . 5.7.2.16 Postal: Japanese . . . . . . . . . . . . 5.7.2.17 Postal: Korean . . . . . . . . . . . . . 5.7.2.18 Postal: PlaNET. . . . . . . . . . . . . 5.7.2.19 Postal: PostNET . . . . . . . . . . . . 5.7.2.20 Postal: Royal Mail . . . . . . . . . . . 5.7.2.21 2D DataMatrix . . . . . . . . . . . . . 5.7.2.22 2D Maxicode. . . . . . . . . . . . . . 5.7.2.23 2D PDF-417 . . . . . . . . . . . . . . 5.7.2.24 2D Micro PDF-417 . . . . . . . . . . 5.7.2.25 2D QR Code . . . . . . . . . . . . . . 5.7.2.26 2D RSS Code . . . . . . . . . . . . . 5.7.2.27 Aztec . . . . . . . . . . . . . . . . . . 5.7.3 Translations . . . . . . . . . . . . . . . . . . . SNMP (Simple Network Management Protocol) Setup 5.8.1 Contact Tab. . . . . . . . . . . . . . . . . . . . 5.8.2 Communities Tab . . . . . . . . . . . . . . . . 5.8.2.1 Adding A Community . . . . . . . . . 5.8.2.2 Modifying A Community Setting . . . 5.8.2.3 Removing An Existing Community . . 5.8.3 Trap Destination Tab . . . . . . . . . . . . . . . 5.8.3.1 Enabling Authentication TRAPS . . . 5.8.3.2 Adding A Destination . . . . . . . . . 5.8.3.3 Changing A Destination . . . . . . . . 5.8.3.4 Removing A Trap Destination . . . . . 5.8.4 Permitted Hosts Tab . . . . . . . . . . . . . . . 5.8.4.1 Adding A Host . . . . . . . . . . . . . 5.8.4.2 Changing A Host. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 129 129 130 130 130 130 131 131 131 131 131 131 132 132 132 132 132 134 135 136 137 138 138 139 139 139 140 140 141 141 142 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 147 147 147 148 149 Chapter 6: Tekterm Application 6.1 6.2 The Tekterm Application . . . . . . . . Additional Keyboard Functions . . . . . 6.2.1 Function Keys And Softkeys. . . 6.2.1.1 Function Keys . . . . . 6.2.1.2 Softkey Function Keys. 6.2.2 Macro Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Psion Teklogix 7530 Hand-Held Computer User Manual v Contents 6.3 6.4 6.5 6.6 6.7 6.8 6.9 vi Keyboard Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3.1 View Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3.1.1 Changing Font Sizes . . . . . . . . . . . . . . . . 6.3.1.2 Panning The Screen Contents . . . . . . . . . . . 6.3.1.3 Exiting View Mode . . . . . . . . . . . . . . . . . 6.3.2 Using The Task Manager To Switch Between Applications . The Tekterm Status Area. . . . . . . . . . . . . . . . . . . . . . . TESS Emulation . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5.1 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 6.5.2 Working With Multiple Sessions . . . . . . . . . . . . . . . 6.5.3 The Field Types. . . . . . . . . . . . . . . . . . . . . . . . 6.5.4 IBM 5250 Emulation Keys . . . . . . . . . . . . . . . . . . 6.5.5 Data Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5.5.1 TESS Edit Modes And Cursor Movement . . . . . 6.5.5.2 <DEL> Key Behaviour In TESS . . . . . . . . . . 6.5.5.3 <BKSP> Key Behaviour In TESS . . . . . . . . . 6.5.6 TESS Status Message . . . . . . . . . . . . . . . . . . . . . 6.5.7 Lock Messages . . . . . . . . . . . . . . . . . . . . . . . . 6.5.8 Control Commands . . . . . . . . . . . . . . . . . . . . . . 6.5.9 Resetting A TESS Session . . . . . . . . . . . . . . . . . . 6.5.10 The Local Menu . . . . . . . . . . . . . . . . . . . . . . . 6.5.11 Selecting Another Host Computer . . . . . . . . . . . . . . 6.5.12 Queuing Mode . . . . . . . . . . . . . . . . . . . . . . . . ANSI Emulation . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6.1 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 6.6.2 Sending Data To The Host . . . . . . . . . . . . . . . . . . 6.6.3 Psion Teklogix Keyboard And VT220 Equivalent Keys . . . 6.6.4 Block Mode (Local Editing) . . . . . . . . . . . . . . . . . 6.6.5 Working With Sessions . . . . . . . . . . . . . . . . . . . . 6.6.5.1 Establishing A New Session . . . . . . . . . . . . 6.6.5.2 Listing Sessions And Moving To Other Sessions . 6.6.5.3 Closing A Session . . . . . . . . . . . . . . . . . 6.6.5.4 Printing A Screen . . . . . . . . . . . . . . . . . . 6.6.5.5 Smart Echo – Disabling . . . . . . . . . . . . . . The Radio Statistics Screen . . . . . . . . . . . . . . . . . . . . . The Tekterm Startup Display Menu . . . . . . . . . . . . . . . . . Working With Menus . . . . . . . . . . . . . . . . . . . . . . . . Psion Teklogix 7530 Hand-Held Computer User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 .150 .150 .150 .151 .152 .153 .154 .154 .154 .154 .155 .155 .156 .157 .158 .159 .160 .160 .160 .161 .161 .162 .162 .162 .163 .163 .164 .165 .165 .165 .165 .166 .166 .166 .168 .169 Contents 6.10 6.11 6.12 6.13 6.14 6.15 6.16 6.17 6.9.1 Using The Keyboard To Navigate Through Menus . . 6.9.1.1 Sub-Menus . . . . . . . . . . . . . . . . . . 6.9.1.2 Numeric Parameters . . . . . . . . . . . . . 6.9.1.3 Y/N Parameters . . . . . . . . . . . . . . . 6.9.1.4 Alpha Parameters . . . . . . . . . . . . . . 6.9.1.5 String Entry Parameters . . . . . . . . . . . 6.9.2 Using The Touchscreen To Navigate Through Menus 6.9.2.1 Sub-Menus . . . . . . . . . . . . . . . . . . 6.9.2.2 Numeric Parameters . . . . . . . . . . . . . 6.9.2.3 Y/N Parameters . . . . . . . . . . . . . . . 6.9.2.4 Alpha Parameters . . . . . . . . . . . . . . 6.9.2.5 String Entry Parameters . . . . . . . . . . . 6.9.3 Saving Changes To Parameters . . . . . . . . . . . . 6.9.4 Retrieving Default Parameter Values . . . . . . . . . Resetting The 7530 Hand-Held Computer . . . . . . . . . . The Parameters Menu . . . . . . . . . . . . . . . . . . . . . 6.11.1 Security Settings . . . . . . . . . . . . . . . . . . . . Display Options . . . . . . . . . . . . . . . . . . . . . . . . More Parameters . . . . . . . . . . . . . . . . . . . . . . . Radio Parameters . . . . . . . . . . . . . . . . . . . . . . . System Parameters . . . . . . . . . . . . . . . . . . . . . . 6.15.1 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . 6.15.1.1 Macro Control Panel. . . . . . . . . . . . . 6.15.1.2 Indicators. . . . . . . . . . . . . . . . . . . 6.15.1.3 Softkeys . . . . . . . . . . . . . . . . . . . 6.15.1.4 Ctrl Panel . . . . . . . . . . . . . . . . . . 6.15.2 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . 6.15.3 Power Mgmt Ctrl Panel . . . . . . . . . . . . . . . . 6.15.4 Security. . . . . . . . . . . . . . . . . . . . . . . . . 6.15.4.1 Default Mode . . . . . . . . . . . . . . . . 6.15.4.2 User Level Options . . . . . . . . . . . . . 6.15.4.3 Sup. Password . . . . . . . . . . . . . . . . 6.15.4.4 Allow Teklogix . . . . . . . . . . . . . . . Scanner Control Panel. . . . . . . . . . . . . . . . . . . . . View Manager . . . . . . . . . . . . . . . . . . . . . . . . . 6.17.1 Split Screen. . . . . . . . . . . . . . . . . . . . . . . 6.17.1.1 Splitting And Displaying Screens . . . . . . 6.17.1.2 Moving Between Split Screens . . . . . . . 6.17.1.3 Toggling Between Full & Split Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 170 170 171 171 171 173 173 174 174 174 174 175 175 175 176 176 177 177 179 180 181 181 182 182 182 183 184 185 185 185 186 186 187 187 188 189 190 190 Psion Teklogix 7530 Hand-Held Computer User Manual vii Contents 6.17.1.4 Using The Asterisk As A Wild Card . . . . . . 6.17.2 Custom Characters (Unicode™) . . . . . . . . . . . . . 6.17.2.1 Creating A Unicode™ Character. . . . . . . . 6.17.2.2 Displaying The Unicode™ Pop-up Window . . 6.18 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.18.1 ANSI Settings. . . . . . . . . . . . . . . . . . . . . . . 6.18.1.1 Host Conn . . . . . . . . . . . . . . . . . . . 6.18.1.2 Screen. . . . . . . . . . . . . . . . . . . . . . 6.18.1.3 Xmit Modes . . . . . . . . . . . . . . . . . . 6.18.1.4 Kbd Modes . . . . . . . . . . . . . . . . . . . 6.18.1.5 Edit Modes . . . . . . . . . . . . . . . . . . . 6.18.1.6 Serial . . . . . . . . . . . . . . . . . . . . . . 6.18.1.7 Host Char Set . . . . . . . . . . . . . . . . . . 6.18.1.8 Anchor View . . . . . . . . . . . . . . . . . . 6.18.2 TESS Settings. . . . . . . . . . . . . . . . . . . . . . . 6.18.2.1 Host Conn. . . . . . . . . . . . . . . . . . . . 6.18.2.2 Screen. . . . . . . . . . . . . . . . . . . . . . 6.18.2.3 Characters . . . . . . . . . . . . . . . . . . . 6.18.2.4 Tests . . . . . . . . . . . . . . . . . . . . . . 6.18.2.5 Features. . . . . . . . . . . . . . . . . . . . . 6.18.2.6 Scanner . . . . . . . . . . . . . . . . . . . . . 6.18.2.7 Fields . . . . . . . . . . . . . . . . . . . . . . 6.18.2.8 Anchor View . . . . . . . . . . . . . . . . . . 6.18.2.9 Emulation. . . . . . . . . . . . . . . . . . . . 6.19 Ports– Tether And Console. . . . . . . . . . . . . . . . . . . . 6.19.1 Tether And Console Port Peripheral Options. . . . . . . 6.19.2 Tether And Console Port Parameter Settings. . . . . . . 6.19.3 Tether And Console Port Scan-See Parameters . . . . . 6.19.3.1 Scan-See Sub-Menu – Mapping The Viewport 6.19.3.2 Scan-See Keyboard Mapping . . . . . . . . . 6.20 Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.20.1 Network Ctrl Panel Settings . . . . . . . . . . . . . . . 6.20.2 802.IQ v2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 .191 .191 .192 .194 .195 .196 .199 .202 .206 .209 .210 .210 .211 .212 .213 .214 .216 .218 .219 .223 .224 .227 .227 .235 .235 .236 .239 .239 .244 .244 .245 .245 External Bar Code Readers . . . . . . . . . . . . . . . . . . . . 7.1.1 PowerScan™ Standard, LR and XLR Bar Code Scanners . 7.1.2 Entering Data With The Bar Code Reader . . . . . . . . . The 7530 Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251 .251 .251 .251 Chapter 7: Peripheral Devices & Accessories 7.1 7.2 viii Psion Teklogix 7530 Hand-Held Computer User Manual Contents 7.2.1 Lithium-Ion Battery Safety Precautions . . . . . . . . . . . Important Charger Safety Instructions . . . . . . . . . . . . . . . Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gang Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5.2 Operator Controls . . . . . . . . . . . . . . . . . . . . . . 7.5.3 Charge Indicators. . . . . . . . . . . . . . . . . . . . . . . 7.5.4 Charging Batteries . . . . . . . . . . . . . . . . . . . . . . 7.5.5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 7.5.5.1 Excessive Charge Duration . . . . . . . . . . . . 7.5.5.2 Indicator Flashing Red. . . . . . . . . . . . . . . 7.5.5.3 Power LED Does Not Light Up . . . . . . . . . . 7.5.5.4 Indicator Does Not Light When Battery Installed . 7.6 Combo Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.6.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 7.6.2 Operator Controls . . . . . . . . . . . . . . . . . . . . . . 7.6.3 Using the Combo Charger With The 7530. . . . . . . . . . 7.6.4 Charging The Spare Battery . . . . . . . . . . . . . . . . . 7.6.5 Charge Indicators. . . . . . . . . . . . . . . . . . . . . . . 7.6.6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 7.7 Combo Dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.7.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 7.7.2 Using The Combo Dock . . . . . . . . . . . . . . . . . . . 7.7.3 Network Access . . . . . . . . . . . . . . . . . . . . . . . 7.7.4 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 7.8 Quad Dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.8.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 7.8.2 Indicators And Controls . . . . . . . . . . . . . . . . . . . 7.8.3 Using The Quad Dock . . . . . . . . . . . . . . . . . . . . 7.8.4 Network Access . . . . . . . . . . . . . . . . . . . . . . . 7.8.4.1 Network Addressing . . . . . . . . . . . . . . . . 7.8.5 Battery Charging . . . . . . . . . . . . . . . . . . . . . . . 7.8.6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 7.8.6.1 Network Link Unsuccessful . . . . . . . . . . . . 7.8.6.2 7530 LED Does Not Light When Docked. . . . . 7.9 Portable Docking Module (PDM). . . . . . . . . . . . . . . . . . 7.10 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . . . 7.3 7.4 7.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 . 253 . 254 . 254 . 255 . 255 . 256 . 256 . 257 . 257 . 257 . 257 . 258 . 258 . 258 . 259 . 259 . 259 . 260 . 260 . 261 . 261 . 261 . 261 . 262 . 262 . 262 . 263 . 263 . 263 . 263 . 263 . 264 . 264 . 264 . 264 . 268 Psion Teklogix 7530 Hand-Held Computer User Manual ix Contents 7.11 The 7530 Picker Cradle . . . . . . . . . . . . . . . . . . . . 7.11.1 Picker Cradle Mounting Recommendations . . . . . . 7.11.1.1 Mounting Template. . . . . . . . . . . . . . 7.11.2 Wiring Guidelines . . . . . . . . . . . . . . . . . . . 7.11.3 Using The Picker Cradle . . . . . . . . . . . . . . . . 7.11.4 Maintaining The Picker Cradle . . . . . . . . . . . . . 7.11.5 Powered Cradle Installation In High Voltage Vehicles 7.11.5.1 Extreme Wet Environments . . . . . . . . . 7.11.6 Powered Cradle Installation . . . . . . . . . . . . . . 7.11.6.1 Wiring Vehicle Power To The Cradle . . . . 7.11.7 The Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268 .269 .269 .270 .270 .270 .271 .271 .272 .273 .274 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277 .279 .279 .279 .280 .280 .281 .281 .282 .284 .284 .284 .287 .288 Chapter 8: Specifications 8.1 8.2 8.3 8.4 8.5 8.6 7530 Hand-Held Computer Specifications . . . . . . . . . . Radio Specifications . . . . . . . . . . . . . . . . . . . . . . Bar Code Scanning. . . . . . . . . . . . . . . . . . . . . . . 8.3.1 Internal Scanners . . . . . . . . . . . . . . . . . . . . 8.3.2 Internal Scanner Port . . . . . . . . . . . . . . . . . . 8.3.3 External Scanners . . . . . . . . . . . . . . . . . . . . Internal Scanner Specifications . . . . . . . . . . . . . . . . 8.4.1 SE1200 High Performance & Long Range Specs . . . 8.4.2 SE1200 Advanced Long Range & SE2223 PDF Specs 8.4.3 Decode Zones . . . . . . . . . . . . . . . . . . . . . . External Scanner Specifications . . . . . . . . . . . . . . . . 8.5.1 PowerScan™ LR and XLR Industrial Scanner Specs . 8.5.2 PowerScan™ Standard Range Scanner Specs . . . . . Lithium-Ion Battery Pack . . . . . . . . . . . . . . . . . . . Appendix A: Support Services And Worldwide Offices A.1 Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1 A.1.1 Canada and USA: Technical Support and Repair Services . . .A-1 A.1.2 International Support. . . . . . . . . . . . . . . . . . . . . . .A-1 Appendix B: Port Pinouts B.1 7530 Tether Port Pinout . . . . . . . . . . . . . . . . . . . . . . . . .B-1 x Psion Teklogix 7530 Hand-Held Computer User Manual Contents B.2 Docking Station Connector . . . . . . . . . . . . . . . . . . . . . . . B-1 B.3 Battery Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Appendix C: USB Setup Application C.1 USB Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . C.1.1 Launching The Application . . . . . . . . . . . . . . . . C.1.2 Pre-Installation: Updating usbstor.inf And wceusbsh.inf . C.1.3 Installation: Installing The 7530 As a Device On Your PC C.1.4 Post Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 C-1 C-2 C-4 C-5 Psion Teklogix 7530 Hand-Held Computer User Manual xi APPROVALS AND SAFETY SUMMARY Declaration Of Conformity Product: Application of Council Directive(s): Conformity Declared to Standards: Manufacturer: Year of Manufacture: Manufacturer’s Address in the European Community: Type of Equipment: Equipment Class: 7530 Hand Held Micro-computer with Portable Docking Module R&TTE Directive: 1999/5/EEC EMC Directive: 89/336/EEC Low Voltage Directive: 73/23/EEC Article 3.1a (Health): EN 60950: 2000 Article 3.1b (EMC): EN 301 489-17: v1.1.1; 09-2000 Article 3.2 (RF Spectrum): EN 300 328-2: v 1.1.1; 07 2000 EN 55022: 1998 + Am 1, Class B; EN 61000-3-2; EN 61000-3-3 EN 55024:1998; EN 61000-4-2; ±4kV CD; ±8kV AD EN 61000-4-3; 3V/m, 80-1000 MHz EN 61000-4-4; ±1kV Power lines EN 61000-4-5; ±1kV Differential mode EN 61000-4-6; 3VRMS, 150kHz-80MHz EN 61000-4-11; AC Mains Ports PSION TEKLOGIX INC. 2100 Meadowvale Boulevard Mississauga, Ontario, Canada L5N 7J9 2003 PSION TEKLOGIX S.A. La Duranne; 135 Rue Rene Descartes; BP 421000 13591 Aix-En-Provence Cedex 3; France Information Technology Equipment Commercial and Light Industrial I the undersigned hereby declare that the equipment specified above conforms to the above directives and standards. Manufacturer: Legal Representative Rob Williams Vice President of Engineering Psion Teklogix Inc. Ontario Domique Binckly Vice President International Sales Psion Teklogix S.A. France Psion Teklogix 7530 Hand-Held Computer User Manual xiii Approvals And Safety Summary FCC DECLARATION OF CONFORMITY (DoC) Applicant’s Name & Address: PSION TEKLOGIX 2100 Meadowvale Blvd. Mississauga, Ontario Canada L5N 7J9 Contact Person: Iain Roy Telephone No.: (905) 813-9900 US Representative’s Name & Address: 1810 Airport Exchange Blvd., Suite 500 Erlanger, KY, 41018, USA Contact Person: Joe Musgrave Telephone No.: (859) 372-4106 Equipment Type/Environment: Computing Devices Trade Name / Model No.: 7530 Hand Held Micro-computer with Portable Docking Module Year of Manufacture: 2004 Standard(s) to which Conformity is Declared: The 7530 Hand Held Micro-computer with Portable Docking Module, supplied by Psion Teklogix, has been tested and found to comply with FCC PART 15, SUBPART B UNINTENTIONAL RADIATORS, CLASS B COMPUTING DEVICES FOR HOME & OFFICE USE. I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. xiv Applicant Legal Representative in U.S. Signature Signature Rob Williams Joe Musgrave Full Name Full Name Vice President of Engineering V.P. Global Solutions, Americas Position Position Mississauga, Ontario, Canada Erlanger, KY 41018, USA Place Place July 4, 2003 July 4, 2003 Date Date Psion Teklogix 7530 Hand-Held Computer User Manual Approvals And Safety Summary This equipment complies with Class B Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Psion Teklogix, the party responsible for compliance, may void the user's authority to operate the equipment. 1. FCC Information to Users For Class B Unintentional Radiators: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 2. Warning to Users Warning: Changes or modifications not expressly approved by Psion Teklogix Inc. could void the user's authority to operate the equipment. Psion Teklogix 7530 Hand-Held Computer User Manual xv Approvals And Safety Summary LASER WARNINGS For your own safety, it is critical that you comply with the following warnings: CAUTION Do not look into the laser beam or point the beam at people or animals. CAUTION Using controls or adjustments, or performing procedures other than those specified herein may result in hazardous radiation exposure. CAUTION The use of optical instruments with this product will increase eye hazard. This product contains a laser scanner that emits less than 1.2 mW maximum radiant power at a wavelength of 650nm or 680nm. This product complies with 21 CFR 1040.10, 1040.11 and DIN EN 60825-1: 2001, and is classified as a Class 2 laser product. The SE1200 ALR has an maximum radiated power less than 1.4 mW; according to EN 60825-1: 2001 it is classified as a Class 3B laser product. DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE Operating Psion Teklogix equipment where explosive gas is present may result in an explosion. DO NOT REMOVE COVERS OR OPEN ENCLOSURES To avoid injury, the equipment covers and enclosures should only be removed by qualified service personnel. Do not operate the equipment without the covers and enclosures properly installed. WARNING: This portable RF transmitting device has been tested and found to comply with FCC and IC RF exposure requirements with the maximum SAR of 0.5 Watts/Kg with body tissue. The antenna used for this transmitter must not be colocated in conjunction with any other antenna or transmitter. xvi Psion Teklogix 7530 Hand-Held Computer User Manual Approvals And Safety Summary CAUTION! Danger of explosion if a 7530 battery is incorrectly handled, charged, disposed of or replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the instructions described in “Lithium-Ion Battery Safety Precautions” on page 252. Carefully review all battery safety issues. VORSICHT! Explosiongefahr bei unsachgemäßem Austausch der Batterie Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleichwertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. Psion Teklogix 7530 Hand-Held Computer User Manual xvii 1 INTRODUCTION 1.1 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3 About The 7530 Hand-Held Computer 1.3.1 Features . . . . . . . . . . . . . 1.3.2 The 7530 Hand-Held Computer . 1.3.3 Regulatory Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 . . . . . . . 5 . . . . . . . 7 . . . . . . . 9 Psion Teklogix 7530 Hand-Held Computer User Manual 1 Chapter 1: Introduction About This Manual 1.1 About This Manual This manual describes how to configure, operate and maintain the Psion Teklogix 7530 hand-held computer. Chapter 1: Introduction provides a basic overview of the 7530 hand-held. Chapter 2: Basic Checkout describes the steps required to get the 7530 ready for operation. Chapter 3: Getting To Know Your 7530 describes the 7530 features and outlines how to charge and maintain the battery. This chapter also provides a description of the keyboard, how to navigate in Microsoft® Windows® CE, how to use the internal scanner, and so on. Chapter 4: Working With Windows CE describes the Microsoft® Windows® CE desktop and how to use it. This chapter also outlines the basics of moving around a Windows CE window, selecting and opening icons, files, folders and working with a Windows dialogue box. Chapter 5: Configuration provides a description of the Windows CE Control Panel and how to use it to configure the 7530, along with the scanners attached to the hand-held, and so on. Chapter 6: Tekterm Application describes TESS and ANSI operations. This chapter also provides descriptions of the Tekterm parameters. Chapter 7: Peripheral Devices & Accessories describes the peripherals and accessories available for your 7530 hand-held. Chapter 8: Specifications details radio, hand-held computer and battery specifications. Appendix A: Support Services And Worldwide Offices provides the helpdesk phone number at the Mississauga, Ontario, Canada office and details the support services available. This appendix also lists the worldwide office addresses and phone numbers. Appendix B: Port Pinouts includes 7530 pinouts. Psion Teklogix 7530 Hand-Held Computer User Manual 3 Chapter 1: Introduction Text Conventions 1.2 Text Conventions Note: Notes highlight additional helpful information. 4 Important: These statements provide particularly important instructions or additional information that is critical to the operation of the equipment. Warning: These statements provide critical information that may prevent physical injury, equipment damage or data loss. Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 1: Introduction About The 7530 Hand-Held Computer 1.3 About The 7530 Hand-Held Computer The 7530 is a ruggedized hand-held personal computer, running the Microsoft® Windows® CE.net operating system. It is intended for use in commercial and light industrial applications with a focus on real time wireless data transactions. All possible bar code input methodologies are supported by one of the variety of scanners available. Optimization for specific operational environments is supported with a wide range of peripheral options and carrying accessories. 1.3.1 Features • Rugged design: - sealed from water and dust to IP54 (light rain) rating. - withstands multiple drops of up to 6.5 feet onto concrete. • Large 240 x 320 portrait mode display that is available in colour or black and white with or without a touchscreen • Automatic backlighting for both the display and the keypad. - automatic backlight and contrast control. - daylight readable screen. • Processor and memory: - Intel PXA255 400Mhz CPU with 32 MB FLASH and 64 MB RAM standard. • Microsoft® Windows® CE.net operating system • Application software: - Internet Explorer for CE. - Tekterm terminal emulation. • Ergonomic keyboard designed to accommodate left- and right-handed use. • Two keyboard formats available: - 58-key with 6 function keys (standard). - 36-key large button with 10 function keys. - keypads feature EL backlight for visibility in low-light conditions. • Wireless communication: - Compact FLASH slot normally equipped with an IEEE 802.11b 11 Mbps 2.4GHz Wi-Fi radio. Psion Teklogix 7530 Hand-Held Computer User Manual 5 Chapter 1: Introduction Features - 6 standard antenna integrated onto radio card. optional high performance internal antenna available. Bluetooth SD I/O radio. • Expansion slot: - SD I/O slot that supports extra FLASH memory (up to 512 MB) • Programming environment: - HTML - .net Compact framework - Java, Visual C++ • Bar code applications: - internal 1D and 2D scan engines. - internal CMOS image capture scan engine. - supports decoded and undecoded tethered scanners. Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 1: Introduction The 7530 Hand-Held Computer 1.3.2 The 7530 Hand-Held Computer Figure 1.1 7530 With 63-Key Keyboard Psion Teklogix 7530 Hand-Held Computer User Manual 7 Chapter 1: Introduction The 7530 Hand-Held Computer Figure 1.2 7530 Docking Port Figure 1.3 Tether Port Figure 1.4 Scanner Window 8 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 1: Introduction Regulatory Labels 1.3.3 Regulatory Labels Figure 1.5 Laser Warning Labels Figure 1.6 Radio Labels Psion Teklogix 7535 Hand-Held Computer User Manual 9 Chapter 1: Introduction Regulatory Labels Figure 1.7 Manufacturer’s Label Warning: 10 Using controls or adjustments or performing procedures other than those specified herein may result in hazardous radiation exposure. Psion Teklogix 7530 Hand-Held Computer User Manual 2 BASIC CHECKOUT 2.1 Preparing The 7530 For Operation . . . . . . . . . . . . . . . . 2.1.1 Equipment You Need To Get Started . . . . . . . . . . . . 2.1.2 Charging The Battery . . . . . . . . . . . . . . . . . . . . 2.1.3 Attaching Carrying Accessories . . . . . . . . . . . . . . 2.1.3.1 Attaching The Hand Strap . . . . . . . . . . . . . 2.1.3.2 Attaching The Pistol Grip . . . . . . . . . . . . . 2.2 Powering Up The 7530 And Configuring The Radio . . . . . . . 2.2.1 Installing The Battery And Switching The 7530 On . . . . 2.2.2 Configuring An IEEE 802.11 Radio Installed In The 7530 2.2.3 Assigning An IP Address . . . . . . . . . . . . . . . . . . 2.2.4 Name Servers Tab. . . . . . . . . . . . . . . . . . . . . . 2.2.5 Advanced Features . . . . . . . . . . . . . . . . . . . . . 2.2.5.1 Rearranging Preferred Networks . . . . . . . . . 2.2.5.2 Deleting A Preferred Network . . . . . . . . . . . 2.2.5.3 Changing Network Properties . . . . . . . . . . . 2.3 Checking The Scanner . . . . . . . . . . . . . . . . . . . . . . 2.4 Using Microsoft® ActiveSync® To Work With Files. . . . . . . 2.5 Calibrating The Touchscreen . . . . . . . . . . . . . . . . . . . 2.6 Resetting The 7530 Hand-Held . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 13 13 13 14 15 16 17 18 24 25 26 26 27 27 27 27 28 28 Psion Teklogix 7530 Hand-Held Computer User Manual 11 Chapter 2: Basic Checkout Preparing The 7530 For Operation 2.1 Preparing The 7530 For Operation Typically, 7530 hand-helds are configured at the factory and arrive ready for use. Although the 7530 is equipped with an internal Compact Flash and SD I/O slot, these slots are not intended for user modification. If a device needs to be changed or added in these slots, contact qualified Psion Teklogix personnel. Refer to Appendix A: Support Services And Worldwide Offices for the service number closest to you. 2.1.1 Equipment You Need To Get Started You’ll need: • • • A 7530 compatible battery charger, docking station or portable docking module (PDM) with power supply. An operating wireless network (if you are not operating the equipment in batch mode). A medium Phillips head screwdriver. 2.1.2 Charging The Battery Important: The 7530 uses a high capacity Lithium-Ion battery. It is critical that you review the battery safety guidelines in “Lithium-Ion Battery Safety Precautions” on page 252 before charging the battery. Batteries shipped from the factory are not charged. They must be fully charged prior to use. Full capacity may not be reached until at least 5 full charge/discharge cycles have been performed. 7530 batteries can be charged using a gang charger or the 7530 internal charger. When using the internal charger, a suitable power source is required. All chargers and docking stations are described in Chapter 7: Peripheral Devices & Accessories beginning on page 254. 2.1.3 Attaching Carrying Accessories Psion Teklogix recommends that a carrying accessory – a hand strap, pistol grip or shoulder strap – be installed on the 7530 before use. If your hand-held is not fitted with a hand strap or pistol grip, you can install either using the carrying accessory kit supplied. You’ll need: • A Phillips head screwdriver. Psion Teklogix 7530 Hand-Held Computer User Manual 13 Chapter 2: Basic Checkout Attaching The Hand Strap Important: 2.1.3.1 Do not use adhesives such as Loctite to secure the screws on the carrying accessories. These chemicals may damage the plastic casing. Attaching The Hand Strap Note: A Phillips head screwdriver is required. Two Phillips head screws are provided with the hand strap. • Attach the strap to the two threaded inserts located at the back of the 7530 near the top of the unit. Figure 2.1 Attaching The Hand Strap 14 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 2: Basic Checkout Attaching The Pistol Grip • Stretch the handstrap toward the base of the 7530, and hook the bottom of the handstrap into the slot near the base of the battery pack. Figure 2.2 Hooking The Hand Strap To The 7530 2.1.3.2 Attaching The Pistol Grip Note: A Phillips head screwdriver is required. The pistol grip is attached to the back of the 7530 using the four threaded inserts in the upper part of the 7530 casing. Four black #4-40 Phillips head screws are provided with this accessory. Note: Prior to installation, make sure the trigger mechanism is securely snapped into the pistol grip body and that the trigger operates properly. Psion Teklogix 7530 Hand-Held Computer User Manual 15 Chapter 2: Basic Checkout Powering Up The 7530 And Configuring The Radio • Position the pistol grip so that it fits snugly over the back of the unit and the inserts on the back of the 7530 align with the holes in the pistol grip. Figure 2.3 Attaching The Pistol Grip • Using a Phillips screwdriver, securely fasten the pistol grip to the back of the 7530. 2.2 Powering Up The 7530 And Configuring The Radio Note: Psion Teklogix offers a Portable Docking Module (PDM) along with its power supply to help speed the checkout and confirmation process for your 7530. The PDM can power your hand-held with or without a battery installed in the 7530. Refer to Chapter 7: Peripheral Devices & Accessories beginning on page 249 for more information about this accessory. 16 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 2: Basic Checkout Installing The Battery And Switching The 7530 On 2.2.1 Installing The Battery And Switching The 7530 On If you are not using a docking station or PDM: • Slide the charged battery with the contoured plastic facing you into the 7530. Click the battery into place. Figure 2.4 Installing The Battery Note: If you are using a docking station, you can insert an uncharged battery, dock the unit and switch it on. If you are using a PDM, you can configure your unit without a battery, with a charged battery or with an uncharged battery. If you are using a hand strap: • Hook the bottom of the hand strap into the slot at the base of the battery. To switch the 7530 on: • • Press and hold down the <ENTER/ON> key for at least one second. When all four LEDs flash orange, release the <ENTER/ON> button. A splash screen displaying the Psion Teklogix logo and the Microsoft® Windows® CE. net logo appears. When Windows® CE has successfully loaded, the startup desktop is displayed. Note: The screen may go blank for a few seconds after the splash screen loading bar reaches the end. This is part of the normal Windows CE cold boot process. The desktop is displayed after a few moments. Psion Teklogix 7530 Hand-Held Computer User Manual 17 Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio Installed In The 7530 2.2.2 Configuring An IEEE 802.11 Radio Installed In The 7530 The most common 802.11b settings are configured as defaults. However, there are some fields that must be completed, including the SSID of your access point and the security methods implemented in the network (including access keys). Important: If the 7530 is equipped with a radio that has never been configured, the radio settings dialogue box opens automatically when the unit is powered on. In this case, skip to Step 4 on page 20. To configure the 802.11b radio: 1. Press <BLUE> 0 to display the Start Menu. Use the <DOWN> arrow key to highlight Settings. Press the <RIGHT> arrow key to display the sub-menu. Highlight Network... and press <ENTER>. If you have a touchscreen, tap on the Windows® Start Menu button in the taskbar, and tap on Settings>Network and Dial-up Connections. Figure 2.5 Network And Dial-Up Connections Note: You can also press <CTRL> <ESC> to display the Start Menu. 18 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio Installed In The 7530 2. Choose the radio icon to open the 802.11b Wireless LAN Settings window – in the sample screen this is labelled $NETWLAN1. Figure 2.6 802.11b Wireless LAN Settings Window 3. Wireless Statistics Tab When you choose the Wireless LAN icon, an 802.11b Wireless LAN Settings window ($NETWLAN1 in the sample below) is displayed. Figure 2.7 Wireless Statistics This tab lists your radio statistics. Choosing the Zero button resets the statistics of the last four items – Packets IN, Packets OUT, IN errors and OUT errors. • Press the <TAB> key followed by the <RIGHT> arrow key to display the next tab in this window – Wireless Information. Psion Teklogix 7530 Hand-Held Computer User Manual 19 Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio Installed In The 7530 4. Wireless Information Tab The options under this tab display existing networks to which you can connect, and it allows you to add a new network or modify the settings for an existing network. Note: Configure button – To change the settings in an existing network, highlight the network you want to modify, and choose the Configure button to display the Wireless Properties dialogue box. Connect button – To force connection to a specific, existing network, highlight the network to which you want your 7530 to connect, and choose the Connect button. Figure 2.8 Wireless Information Tab This tab lists available networks – any access points that are broadcasting an SSID, and it lists preferred networks – networks that you have configured. Since access points are generally secure, they will most likely not be listed here. By default, 7530 attempts to connect to preferred networks. This behaviour can be changed by enabling (√) ‘Automatically connect to non-preferred networks’ in the Advanced dialogue box (page 26). • To add a new configuration, press the <TAB> key to highlight the Add New button, and press <ENTER>. A blank Wireless Properties dialogue box is displayed. 20 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio Installed In The 7530 5. Wireless Properties Figure 2.9 Wireless Properties Dialogue Box Network name (SSID): • Type the appropriate SSID (Service Set Identifier) in the ‘Network name (SSID):’ text entry field at the top of this dialogue box. The Network name field can contain a maximum of 32 characters. The name assigned here is listed as a preferred network. Important: Keep in mind that the 7530 will only communicate with access points that are configured with the same SSID. Ad Hoc And Infrastructure If you are using an “Infrastructure” network – one in which 7530s must pass data through an access point – leave the checkbox next to ‘This is an ad hoc network’ blank. If you are using an “Ad Hoc” network – a network in which 7530s pass data directly to other 7530s without an access point – press the <TAB> key to highlight ‘This is an ad hoc network’, and press the <SPACE> key to enable (√) Ad Hoc. Encryption WEP (Wired-Equivalent Privacy) encryption prevents others from accidentally accessing your network. If you are not using encryption, you can choose ‘Disabled’ from the dropdown encryption menu. Otherwise, leave this field as is. Psion Teklogix 7530 Hand-Held Computer User Manual 21 Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio Installed In The 7530 Authentication 802.11 supports two subtypes of network authentication services: Open and Shared. Under Open authentication, any wireless station can request authentication. The station that needs to authenticate with another wireless station sends an authentication management frame that contains the identity of the sending station. The receiving station then sends back a frame that indicates whether it recognizes the identity of the sending station. Under Shared authentication, each wireless station is assumed to have received a secret shared key over a secure channel that is independent from the 802.11 wireless network communications channel. Network Key: This text box is used to specify a 5 or 13 ASCII character sequence or an equivalent 10 or 26 Hexadecimal digit sequence that matches the active WEP key on the access point. • To assign a Network key, press <TAB> to highlight ‘The key is provided automatically’, and press the <SPACE> key to disable this option. Disable this option to access Network Key & Key Index fields. Figure 2.10 Accessing Network Key And Key Index Key Index: This field is used to identify the WEP key. • Enter a value from 1 to 4. 22 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio Installed In The 7530 Enable 802.1x authentication “802.1X” is the IEEE standard that offers additional security for local area networks. It provides authentication for user devices attached to an Ethernet network, whether wired or wireless. A security protocol packet such as TLS or MD5 encapsulated in an “EAP” is used in conjunction with the “802.1x” standard to authenticate users at the MAC layer. Available EAPs are listed in the dropdown menu next to the ‘EAP’ option. • To activate “802.1X”, press <TAB> to highlight ‘Enable 802.1x authentication’, and press the <SPACE> key to enable (√) it. EAP Type (Extensible Authentication Protocol): This dropdown menu lists the EAP types available on your system. The items in this dropdown menu will vary depending on your network setup. Keep in mind also that some authentication protocols require that you select a ‘Certificate’. By selecting the Properties button, you will be able to select a Certificate. “Certificate Assignment” on page 105 provides a website that outlines how to create certificates for your network. 6. Saving and exiting the radio setup. Once you have completed your configuration, press <ENTER> or tap on OK. The connection you created will be listed in the Wireless Information tab as a preferred network. The radio will search for the SSID and will compare the WEP and authentication information you specified. If there is a match between your 7530 settings and the access point settings, the 7530 will communicate on the network through the access point. Psion Teklogix 7530 Hand-Held Computer User Manual 23 Chapter 2: Basic Checkout Assigning An IP Address 2.2.3 Assigning An IP Address If your network is not using a DHCP server, you will need to assign an IP address. • In the $NETWLAN1 Settings window, press the <TAB> key followed by the <LEFT> arrow key to display the IP Information tab. Figure 2.11 IP Information Note: Choosing the Renew button forces the 7530 to renew or find a new IP address. This is useful if, for example, you are out of communication range for a longer period of time and your 7530 is dropped from the network. To define a static IP address: • Highlight the Configure... button, and press <ENTER>. Figure 2.12 Defining An IP Address 24 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 2: Basic Checkout Name Servers Tab • • Press the <DOWN> arrow key to highlight Specify an IP address. Press the <TAB> key to move from field to field, and type an IP, Subnet Mask and Default Gateway address. Press <ENTER> to save your information. 2.2.4 Name Servers Tab Note: If DHCP is enabled, name server addresses are assigned automatically. • • • In the $NETWLAN1 Settings window, press the <TAB> key followed by the <LEFT> arrow key to display the IP Information tab. In the IP Information tab, highlight the Configure... button, and press <ENTER>. Press the <TAB> key followed by the <RIGHT> arrow key to display the Name Servers tab. Figure 2.13 Name Servers Tab The DNS and WINS fields in the Name Servers tab allow you to specify additional WINS and DNS resolvers. The format for these fields is ###.###.###.###. Psion Teklogix 7530 Hand-Held Computer User Manual 25 Chapter 2: Basic Checkout Advanced Features 2.2.5 Advanced Features To display the Advanced Wireless Settings dialogue box: • Highlight the Advanced... button in the Wireless Information tab and press <ENTER>. This window lists the available preferred networks. Figure 2.14 Advanced Settings 2.2.5.1 Rearranging Preferred Networks The 7530 attempts to connect with the networks listed in this dialogue box in sequence, beginning at the top of the list. If you need to rearrange this list of networks – move networks up and down in the list: • • • 26 Press the <TAB> key to move the cursor into the networks list. Use the <UP> or <DOWN> arrow keys to highlight the network that you want to move up or down in the list. To move the highlighted item in the list upward or downward, press <TAB> to highlight the Up or Down button, and press <ENTER>. Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 2: Basic Checkout Deleting A Preferred Network 2.2.5.2 Deleting A Preferred Network To delete a network from this list: • Press the <TAB> key to highlight the networks list. • Use the <UP> or <DOWN> arrow keys to highlight the network that you want to remove. • Highlight the Delete button, and press <ENTER>. 2.2.5.3 Changing Network Properties To change the properties of an existing preferred network: • Highlight the network that you want to modify. • Press <TAB> to highlight the Properties button, and press <ENTER>. • Make any necessary changes in the Wireless Properties dialogue box, and press <ENTER> to save the changes. 2.3 Checking The Scanner If your 7530 is equipped with an internal scanner, it will successfully decode most 1D bar codes as delivered. Press the SCAN button and check for a valid decode on any UPC bar code. If desired, set the “Dot Time” parameter to zero in the ‘Teklogix Scanners’ applet in the Control Panel to turn off the default aiming dot. Performance is improved if you disable all unneeded bar codes under the ‘Bar Codes’ dialogue screen. Review “Scanner Properties Setup” on page 118 for details about bar codes. 2.4 Using Microsoft® ActiveSync® To Work With Files ActiveSync® – Microsoft PC connectivity software – can be used to connect the 7530 to PCs running this software. By connecting the 7530 to a PC with a cable and running ActiveSync on the PC, you can: • View 7530 files from Windows Explorer. • Drag and drop files between the 7530 and the PC in the same way that you would between PC drives. • Back up 7530 files to the PC, then restore them from the PC to the hand-held again, if needed, and so on. Note: You’ll need the USB setup utility to configure the .ini file. For information about this USB application, refer to Appendix C: USB Setup Application. Psion Teklogix 7530 Hand-Held Computer User Manual 27 Chapter 2: Basic Checkout Calibrating The Touchscreen To install ActiveSync, follow the step-by-step instructions provided with the program’s setup wizard. Refer to the following website for details: http://www.microsoft.com/windowsmobile/resources/downloads/pocketpc/activesync35.mspx 2.5 Calibrating The Touchscreen If your 7530 is equipped with a touchscreen, it will need to be calibrated. Refer to “Calibrating The Touchscreen” on page 41 for details. 2.6 Resetting The 7530 Hand-Held Important: Because Psion Teklogix cannot guarantee what has been saved (registry) after a reset, this should be considered as a last resort. To reset the 7530: • Press and hold down the <BLUE> key and the <ENTER/ON> key simultaneously for a minimum of six seconds. A reset results in a complete reboot of the unit. All RAM memory contents are lost. The contents of the flash memory and memory card may be preserved, but Psion Teklogix cannot guarantee. However, you should keep in mind that When the 7530 is reset, the screen displays the Psion Teklogix and Microsoft® Windows® CE.net splash screen before displaying the startup desktop. Note: You do not need to reset your 7530 after configuring the radio. 28 Psion Teklogix 7530 Hand-Held Computer User Manual 3 GETTING TO KNOW YOUR 7530 3.1 Features Of The 7530 . . . . . . . . . . . . . . . . . . . . . . . . 3.2 The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.1 Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.2 Removing And Installing The Battery Pack . . . . . . . . . 3.2.3 Charging The Battery . . . . . . . . . . . . . . . . . . . . . 3.3 Switching The 7530 Hand-Held On And Off . . . . . . . . . . . . 3.4 The Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4.1 Modifier Keys. . . . . . . . . . . . . . . . . . . . . . . . . 3.4.1.1 Activating Modifier Keys . . . . . . . . . . . . . . 3.4.1.2 Locking Modifier Keys . . . . . . . . . . . . . . . 3.4.2 The Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4.3 The 63-Key Keyboard . . . . . . . . . . . . . . . . . . . . 3.4.4 The 37-Key Keyboard . . . . . . . . . . . . . . . . . . . . 3.4.5 The Keypad Backlight . . . . . . . . . . . . . . . . . . . . 3.5 The Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5.1 Adjusting The Display Backlight . . . . . . . . . . . . . . . 3.5.2 Adjusting The Contrast . . . . . . . . . . . . . . . . . . . . 3.5.3 Calibrating The Touchscreen . . . . . . . . . . . . . . . . . 3.6 7530 Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6.1 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6.1.1 Charge LED . . . . . . . . . . . . . . . . . . . . . 3.6.1.2 Radio Traffic LED . . . . . . . . . . . . . . . . . . 3.6.1.3 Scan LED . . . . . . . . . . . . . . . . . . . . . . 3.6.1.4 User Application LED . . . . . . . . . . . . . . . . 3.6.2 Onscreen Indicators. . . . . . . . . . . . . . . . . . . . . . 3.6.3 Audio Indicators . . . . . . . . . . . . . . . . . . . . . . . 3.6.3.1 Adjusting The Beeper Volume . . . . . . . . . . . . 3.7 Internal Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7.1 Scanning Techniques . . . . . . . . . . . . . . . . . . . . . 3.7.2 Scan LED Indicators . . . . . . . . . . . . . . . . . . . . . 3.7.3 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . 3.7.4 Operating One Dimensional (1D) Internal Laser Scanners. . 3.7.5 Operating Internal PDF Laser Scanners . . . . . . . . . . . 3.7.6 Operating Internal Two Dimensional (2D) Imager Scanners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 32 32 32 33 34 35 35 36 36 36 37 38 40 40 40 41 41 42 42 43 44 44 44 45 47 48 48 49 49 50 50 51 51 Psion Teklogix 7530 Hand-Held Computer User Manual 29 Chapter 3: Getting To Know Your 7530 3.8 Connecting & Disconnecting Tethered Peripherals . . 3.9 Monitoring The Battery And Maximizing Run Time . 3.9.1 Storing Batteries. . . . . . . . . . . . . . . . . 3.10 Monitoring The Network Connection . . . . . . . . 3.11 Uploading Data In A Docking Station . . . . . . . . 3.12 General Maintenance. . . . . . . . . . . . . . . . . 3.12.1 Caring For The Touchscreen . . . . . . . . . . 3.12.2 Cleaning The 7530. . . . . . . . . . . . . . . 30 Psion Teklogix 7530 Hand-Held Computer User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 . 53 . 55 . 55 . 56 . 56 . 56 . 57 Chapter 3: Getting To Know Your 7530 Features Of The 7530 3.1 Features Of The 7530 7530 Screen Sound Port Ambient Light Sensor Tether Port Docking Port Figure 3.1 Front Of 7530 Stylus (Pointing Tool) Scanner Window Battery Pack Tether Port Figure 3.2 Back Of 7530 Psion Teklogix 7530 Hand-Held Computer User Manual 31 Chapter 3: Getting To Know Your 7530 The Battery 3.2 The Battery The 7530 hand-held operates with a Lithium-Ion battery pack. Preparing the hand-held unit for operation requires that a battery pack be charged and installed in the unit. 3.2.1 Battery Safety Important: Before attempting to install, use or charge the battery pack, it is critical that you review and follow the important safety guidelines in the section entitled “Lithium-Ion Battery Safety Precautions” beginning on page 252. 3.2.2 Removing And Installing The Battery Pack Note: TURN OFF THE 7530 HAND-HELD BEFORE REMOVING THE BATTERY PACK. If you do not turn the hand-held off before removing the battery, it may be necessary to reboot the unit. Any active sessions will be lost. Removing The Battery Pack • • 32 If your 7530 is equipped with a hand strap, unhook it from the base of the battery. Press down the release tab at the top of the battery, and slide the battery out. Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 3: Getting To Know Your 7530 Charging The Battery Installing The Battery Pack To install the battery pack: • Slide the battery pack with the contoured plastic facing you into the 7530. Click the battery into place. Figure 3.3 Installing The Battery Pack • If your computer is equipped with a hand strap, insert the hook at the end of the hand strap into the slot at the base of the battery. 3.2.3 Charging The Battery Important: FOR DETAILED INFORMATION about 7530 chargers and docking stations, refer to Chapter 7: Peripheral Devices & Accessories beginning on page 249. For battery safety, refer to “Lithium-Ion Battery Safety Precautions” beginning on page 252. All batteries must be charged before use. The 7530 battery can be charged with a variety of chargers. These include: • • • 6-Gang Charger (Model #HU3006) – charges up to six Lithium-Ion batteries at one time. Portable Docking Module (Model #HU4001 or HU1005 and HU3220 or HU3220) – charges the 7530 battery (with the battery installed in the unit). Combo Charger (Model #HU3002) – a desktop charger that charges the 7530 internal battery along with a spare battery pack. Psion Teklogix 7530 Hand-Held Computer User Manual 33 Chapter 3: Getting To Know Your 7530 Switching The 7530 Hand-Held On And Off • • • Combo Docking Station (Model #HU4002) – operates as both a charger and a docking station. Operating as a charger, both the battery installed in the computer and a spare battery can be charged simultaneously. Quad Docking Station (Model #HU4004) – can charge the battery of up to four 7530s inserted in the docking station while transferring data through an Ethernet connection. Powered Cradle (Model #HU1000, HU1010) – can charge the 7530 with the battery installed in the hand-held. It can take from 1.5 to 4 hours to charge a battery. The 7530’s intelligent charging system protects the battery from over-charging by terminating the charge process when the battery is at maximum capacity. Note: Refer to “Monitoring The Battery And Maximizing Run Time” on page 53 for additional information about the 7530 battery. Important: To avoid damaging the battery, chargers will not begin the charge process until the battery temperature is between 0˚C (32˚F) and 39˚C (102˚F). If the battery is too hot or cold, the battery status LED flashes yellow and the charge is suspended. Refer to Table 3.1, “Charge LEDs” on page 43 for details. 3.3 Switching The 7530 Hand-Held On And Off Switching On The 7530 • • Press and hold down the <ENTER/ON> key for at least one second. When all four LEDs flash orange, release the <ENTER/ON> button. A splash screen displaying the Psion Teklogix logo and the Microsoft® Windows® CE. net logo appears followed by the startup desktop. Note: If the 7530 is in suspend state, pressing <ENTER/ON> key ‘wakes’ the unit from this state. The screen in which you were working before the computer entered suspend state is displayed. 34 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 3: Getting To Know Your 7530 The Keyboard Switching Off The 7530 Important: Keep in mind that turning off the 7530 does not result in a complete reboot; rather, the unit enters a power-saving, “suspend” state. When the 7530 is turned on from suspend state, operation resumes within a few seconds. To switch off the 7530: • Press the <BLUE> key, and then press the <ENTER/ON> key. Important: If the word ‘BLUE’ is displayed in uppercase in the taskbar area at the bottom of the screen, this key is locked “on” – the 7530 will not switch off. Press the <BLUE> key again to unlock it; then press <BLUE> <ENTER/ON> to switch the 7530 off. If, however, you’ve disabled the “Blue Key” in the ‘One Shot’ dialogue box (see “Keyboard One Shot Modes” on page 94), the 7530 can be turned off even when the <BLUE> key is locked ‘on’. 3.4 The Keyboard The 7530 offers two types of keyboard layouts – a 58-key keyboard and a 36-key, large button keyboard. Most of the keys on these keyboards operate much like a desktop computer. Where a key or key function is not consistent with the PC keyboard, the differences are noted. The <BLUE> and <ORANGE> modifier keys provide access to additional keys and system functions. These functions are colour coded in orange and blue print above the keyboard keys. 3.4.1 Modifier Keys The <SHIFT>, <CTRL>, <ALT>, <BLUE> and <ORANGE> keys are modifier keys. Pressing a modifier key changes the function of the next key pressed. For example, on a 58-key keyboard, a square bracket is printed in orange print above the <4> key. Pressing the <ORANGE> key followed by the <4> key displays a square bracket rather than the number 4. Psion Teklogix 7530 Hand-Held Computer User Manual 35 Chapter 3: Getting To Know Your 7530 Activating Modifier Keys The <SHIFT>, <CTRL> and <ALT> keys operate much like a desktop keyboard except that they are not chorded (two keys held down simultaneously). The modifier key must be pressed first followed by the key whose function you want modified. 3.4.1.1 Activating Modifier Keys When a modifier key is pressed once, it is displayed in lowercase letters in the taskbar at the bottom of the 7530 screen. For example, if the <CTRL> key is pressed, ctrl key is displayed at the bottom of the unit screen. Once the next key is pressed, the modifier key becomes inactive and disappears from the taskbar. 3.4.1.2 Locking Modifier Keys When a modifier key is pressed twice, it is ‘locked’ on. A ‘locked’ modifier key is displayed in uppercase letters in the taskbar. For example, pressing the <BLUE> key twice locks it on – it is displayed as BLUE KEY in the taskbar at the bottom of the computer screen. The locked modifier key will remain active until it is pressed a third time to unlock or turn it off. Once a modifier key is unlocked (pressed a third time), the uppercase representation at the bottom of the screen is no longer displayed. Note: The locking function of the <ORANGE> and <BLUE> keys can be disabled so that pressing either of these keys once will lock the keys ‘on’. If you disable the ‘One Shot’ function of either of these keys, pressing the <BLUE> and/or <ORANGE> key once will lock the key ‘on’. Pressing the same key a second time will unlock or turn it ‘off’. Refer to “Keyboard One Shot Modes” on page 94 for details. 3.4.2 The Keys The <SHIFT> Key The <SHIFT> key is used to display uppercase alpha characters and provide access to the symbols above the numeric keys. The Arrow Keys The Arrow keys move the cursor around the screen in the direction of the arrow – up, down, left and right. The cursor is the flashing box or underline character that indicates where the next character you type will appear. 36 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 3: Getting To Know Your 7530 The 58-Key Keyboard The <BKSP/DEL> Key The <BKSP> key (sometimes referred to as destructive backspace) moves the cursor one character to the left, erasing the incorrectly entered key stroke. The <DEL> key (<BLUE> <BKSP>) erases the character at the cursor position. The <CTRL> And <ALT> Key The <CTRL> and <ALT> keys modify the function of the next key pressed and are application dependent. The <TAB> Key Typically, the <TAB> key moves the cursor to the next field to the right or downward. The <ESC> Key Generally, this key is used as a keyboard shortcut to close the current menu, dialogue box or activity and return to the previous one. The <SPACE> Key Pressing this key inserts a blank space between characters. In a Windows dialogue box, pressing the <SPACE> key enables (√) or disables a checkbox. The <SCAN> Key Pressing the <SCAN> key – the yellow key with the star-burst scan symbol on it – activates the scanner beam while pressed. For units that do not have internal scanners, this key is inoperable. 3.4.3 The 58-Key Keyboard In addition to alphanumeric keys that are directly accessible on the keyboard (no key combination is required) and the keys described in this chapter, the 58-key keyboard also provides function keys and macro keys. Function keys <F1> through <F24> can be used with the CE operating system or another application. The additional function keys – <F25> through <F30> along with the macros are not used as part of the Windows CE operating system. All function keys and macro keys can be custom defined for each application. The Tekterm application utilizes these keys. Refer to “Additional Keyboard Functions” on page 147 for details about Tekterm keys. Psion Teklogix 7530 Hand-Held Computer User Manual 37 Chapter 3: Getting To Know Your 7530 The 37-Key Keyboard 3.4.4 The 37-Key Keyboard On 37-key 7530s, all alpha characters are printed on the unit plastic in orange typeface above the numeric keys. To access an alpha character, you must first press the <ORANGE> key and then press the numeric key above which the alpha character you want to type is printed. Because the alpha keys on a 37-key keyboard are laid out much like the letters on a telephone – generally in groups of three letters per numeric key – you need to take a few extra steps to access the alphabetic characters. The examples in this section help illustrate how to access alpha characters. Choosing A Single Alpha Character Note: Keep in mind that the following examples assume that ‘One Shot’ is enabled for the <ORANGE> key. Refer to “Keyboard One Shot Modes” on page 94 for details. The examples below illustrate how to access A, B and C, all of which are printed in orange characters above the numeric key, <2>. To choose the letter ‘a’: • Press the <ORANGE> key, and press the numeric key <2>. To choose the letter ‘b’: • Press the <ORANGE> key twice to lock it ‘on’, and press <2> twice. • Press the <ORANGE> key again to unlock or turn it off. To choose the letter ‘c’: • Press the <ORANGE> key twice to lock it ‘on’. • Press <2> three times, and then • Press the <ORANGE> key again to unlock or turn it off. Creating Uppercase Letters To display a capital letter: • Press the <ORANGE> key and then the <SHIFT> key before typing the alpha character. 38 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 3: Getting To Know Your 7530 The 37-Key Keyboard Choosing More Than One Alpha Character From The Same Key If you need to choose more than one alpha character from a single key, you’ll need to press the ‘Accept’ key between alpha selections. The ‘Accept’ key is presented as an arrow ⇒ symbol above the ‘0’ (zero) key. Pressing this key signals the 7530 to display the alpha character you’ve chosen and await the next selection from the same key. For example, suppose you want to type the letters ‘a’, ‘b’ and ‘c’. These letters are all accessible from the numeric key, <2>. To type the letter ‘a’: • Press the <ORANGE> key twice to lock it ‘on’, and then press the numeric key, <2>. • Press the ‘Accept’ key < ⇒> to indicate that the letter ‘a’ should be accepted and that another letter from the same key will be chosen. To type the letter ‘b’: • Press the <2> key twice. • Press < ⇒> to accept the letter ‘b’. To type the letter ‘c’: • Press the <2> key three times. When you have completed your alpha selections from this key, you can do one of the following: • If you want to choose additional alpha characters from another key(s), leave the <ORANGE> key ‘on’, and press the next numeric key that supports the alpha character you require. • If you do not want to choose any additional alpha characters, press <ORANGE> again to unlock or turn ‘off’ the key and end alpha selection. Choosing Multiple Alpha Characters From A Range Of Keys If you plan on choosing alpha characters from a number of different keys, you are not required to press the ‘Accept’ < ⇒> key after each alpha selection. The < ⇒> key is only required when you are choosing more than one alpha character from the same key – e.g., ‘a’, ‘b’ and ‘c’ from the <2> key. Psion Teklogix 7530 Hand-Held Computer User Manual 39 Chapter 3: Getting To Know Your 7530 The Keypad Backlight Suppose you want to type the letters ‘a’, ‘d’ and ‘g’. These alpha characters are accessed from the numeric keys <2>, <3> and <4>. • • • With the <ORANGE> key locked ‘on’ (press twice), press <2> to type the letter ‘a’. Press <3> to type ‘d’, and press <4> to type the letter ‘g’. To end alpha selection, press the <ORANGE> key a third time to unlock it. 3.4.5 The Keypad Backlight The intensity of the keypad backlight and the conditions under which this backlight is activated can be configured using the Keyboard icon in the Windows CE Control Panel. The behaviour of the keypad backlight is tailored in the Keyboard Properties dialogue box. Refer to “Keyboard Backlight” on page 93 for details about this option. Note: Keep in mind that this option may be restricted to supervisory use only. 3.5 The Display 7530s are equipped with display backlighting to improve character visibility in low light conditions. The backlight switches on when a key is pressed and the ambient light is below the set threshold. A light sensor on the front of the hand-held determines the ambient light level. On some displays, the contrast can also be adjusted to further improve character visibility. 3.5.1 Adjusting The Display Backlight The behaviour of the display backlight – the ambient light threshold below which the backlight will become active and the intensity of the backlight – can be specified in the Display Properties dialogue box in the Windows CE Control Panel. Note: Refer to “Display Backlight” on page 89 for details about the Display Properties dialogue box. 40 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 3: Getting To Know Your 7530 Adjusting The Contrast 3.5.2 Adjusting The Contrast Note: In addition to the manual adjustments described in this section, the display contrast can also be adjusted using the Windows CE Control Panel. Refer to “Display Contrast” on page 88 for details about this dialogue box. The display contrast can be adjusted from the unit keyboard using the <BLUE> key and function keys <F1> and <F2>. Pressing <F1> darkens the display, and pressing <F2> lightens the display. Keep in mind that adjusting the contrast on a colour display is much less pronounced than on a monochrome display. To adjust the display contrast: • Press the <BLUE> key twice to lock it on, and then press <F1> . to darken the display or <F2> . to lighten the display. • Once you’ve successfully adjusted the display contrast, remember to press the <BLUE> key again to turn it ‘off’. 3.5.3 Calibrating The Touchscreen If your 7530 touchscreen has never been calibrated or if you find that the stylus pointer is not accurate when you tap on an item, use the Stylus Properties dialogue box in the Windows CE Control Panel to recalibrate the screen. • In the Control Panel, choose the Stylus icon to display the Stylus Properties window. Figure 3.4 Stylus Icon Psion Teklogix 7530 Hand-Held Computer User Manual 41 Chapter 3: Getting To Know Your 7530 7530 Indicators • Select the Calibration tab, and then choose the ‘Recalibrate’ button. Figure 3.5 Calibration Screen • Follow the directions on the calibration screen to calibrate the screen. 3.6 7530 Indicators 7535s use LEDs (Light Emitting Diode), onscreen messages and audio tones as indicators. 3.6.1 LEDs The 7535 is equipped with four tri-coloured LEDs. This section outlines what these LEDs indicate. Important: 42 If an LED is illuminated in red, the operator should be cautious as this generally indicates an abnormal operating condition or active laser emission. Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 3: Getting To Know Your 7530 Charge LED User Application LED Radio Traffic LED Scanner LED Charge LED Figure 3.6 Keyboard LEDs 3.6.1.1 Charge LED The lower-right LED is reserved for internal charger/power status. This indicator is active even when the 7535 is inserted in a docking station (and in suspend mode) so that the charge status of the battery can be detected easily. Function Charge LED Behaviour External power not available. Fully charged to within 95% of charge capacity. Quick charge successfully completed to within 75% of charge capacity. Charge in progress. Cell temperature out of range for charge. Unable to charge battery. Charge circuit failure.* LED off. LED displays solid green colour. LED flashes slow green. LED displays solid yellow colour. LED flashes yellow. LED displays solid red colour. LED flashes fast red.* *If the charge fails, refer to the charger troubleshooting sections in Chapter 7: Peripheral Devices & Accessories beginning on page 254 for helpful details. Table 3.1 Charge LEDs Psion Teklogix 7530 Hand-Held Computer User Manual 43 Chapter 3: Getting To Know Your 7530 Radio Traffic LED 3.6.1.2 Radio Traffic LED The upper-left LED on your 7530 flashes either orange or green to indicate when the radio transmits and receives data. Note: Keep in mind that while the standard 802.11b radio supports the transmit/receive LED, not all radios support this function. Function Radio Traffic LED Behaviour Radio Transmit Radio Receive LED flashes orange. LED flashes green. Table 3.2 Transmit and Receive LEDs 3.6.1.3 Scan LED Successful scans are indicated in two ways – with a scan LED and with an audio tone. Function Scan in progress Successful scan Unsuccessful scan Scan LED Behaviour LED displays solid red during scan. LED displays solid green after decode. Off when scan ended. LED flashes red. Table 3.3 Scan LED 3.6.1.4 User Application LED This indicator is available for user-loaded custom Windows CE applications. Refer to the 7535 SDK Manual for details about this LED. Neither Windows CE nor Tekterm use this LED. 44 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 3: Getting To Know Your 7530 Onscreen Indicators 3.6.2 Onscreen Indicators The taskbar at the bottom of the screen displays a variety of system status indicators. Figure 3.7 Taskbar This display changes dynamically, and only those icons that are applicable are displayed. For example, if a radio is not installed in your 7535, the radio signal icon is not displayed in the taskbar. Windows® Start Button If you have a touchscreen, you can display the Start Menu by tapping on the Windows® Start button in the taskbar. Psion Teklogix 7530 Hand-Held Computer User Manual 45 Chapter 3: Getting To Know Your 7530 Onscreen Indicators Modifier Key Indicators <SHIFT>, <CTRL>, <ALT>, <BLUE> and <ORANGE> are modifier keys that have onscreen indicators to show when a key is active or locked. If a modifier key is pressed once to activate it, the key is displayed in the taskbar in lowercase characters – for example, pressing the <BLUE> key once displays blue key in the taskbar. If a modifier key is pressed twice, it is ‘locked on’ and the onscreen indicator is displayed in uppercase letters in the taskbar – for example, pressing <BLUE> twice displays BLUE KEY in the taskbar. Battery Gauge The battery shaped icon displayed in the taskbar provides a visual indication of the remaining battery power. The icon acts as a meter that is either full, at three-quarter level, half, quarter level or empty. When the battery level is low – approximately 15 minutes from empty – a warning window pops up. When the battery power is completely depleted, a final warning window indicates that the 7535 will be powered down. If the 7535 is using external AC power, an AC icon is displayed in the taskbar. Full 75% 50% 25% Empty AC Connection Battery Charge The battery charge icon is displayed in the taskbar when the 7535 hand-held battery is being charged. Radio Signal Quality Increasing radio signal quality is represented by longer, filled bars within this icon. Good Reception 46 Psion Teklogix 7530 Hand-Held Computer User Manual Weak Reception No Radio Link Chapter 3: Getting To Know Your 7530 Audio Indicators Tethered Devices When a peripheral is attached to the tether port and activated, an associated icon appears in the taskbar. The sample to the left indicates that a USB device is connected to the tether port. Scanner USB Device RFID Serial Device Scan-See Docking Device When a 7535 is inserted in a docking station, charger or cradle, an associated icon appears in the taskbar. Gang Charger, Combo Charger & Combo Docking Station Quad Docking Station Power Cradle Portable Docking Module (PDM) Security Level Security levels can be set to limit user access to 7535 settings. In addition, applications can be restricted to prevent inadvertent changes. 3.6.3 Audio Indicators The 7535 beeper provides a variety of sounds and can be configured to emit a sound when a key is pressed, a keyboard character is rejected, scan input is accepted or rejected, an operator’s entry does not match in a match field or the battery is low. The volume function keys are located in the top row of the keyboard. The increase volume key is labelled with a plus symbol and the decrease volume function key is labelled with a minus symbol . Psion Teklogix 7530 Hand-Held Computer User Manual 47 Chapter 3: Getting To Know Your 7530 Adjusting The Beeper Volume 3.6.3.1 Adjusting The Beeper Volume On 63-key keyboards, the volume function keys are accessed by pressing <BLUE> <F5> and <F6>. On 36-key keyboards, the volume function keys are accessed by pressing <BLUE> < F3> and <F4>. To adjust the beeper volume: • • Press the <BLUE> key twice to lock the key ‘on’ and then, press the increase volume function key or the decrease volume function key until the volume is meets your requirements. Remember to press the <BLUE> key again to turn it ‘off’. 3.7 Internal Scanners Important: For detailed scanner specifications and decode zone tables, refer to “Internal Scanner Specifications” beginning on page 281. The scanner installed in your unit can be configured using the Scanner Properties dialogue box in the Control Panel. The 7535 can be equipped with a: • • • One dimensional (1D) internal laser scanner, Internal PDF laser scanner, or a Two dimensional (2D) internal imager scanner. It is critical that you review the warnings listed in “Laser Warnings” on page xvi in the Approvals and Safety section at the beginning of this manual before using any of the scanners described in this chapter. “Scanning Techniques” outlines the mechanics of a successful scan. In addition, review “Scan LED Indicators” on page 49 to better understand how to interpret whether or not a bar code has been successfully scanned. Finally, “Troubleshooting” on page 50 provides some helpful suggestions should the scan fail. 48 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 3: Getting To Know Your 7530 Scanning Techniques 3.7.1 Scanning Techniques Note: The scanning techniques described here apply to internal and external scanners. • • • • • • Hold the scanner at an angle. Do not hold it perpendicular to the bar code. Do not hold the scanner directly over the bar code. In this position, light can reflect back into the scanner’s exit window and prevent a successful decode. Scan the entire bar code. If you are using a 1D or PDF laser scanner, make certain that the scan beam crosses every bar and space on the bar code, including the margins on either end of the symbol. If you are using a 2D imaging scanner, make certain the red, oval shaped framing mark is centered within the bar code you want to scan. Hold the scanner farther away for larger bar codes. Hold the scanner closer for bar codes with bars that are close together. 3.7.2 Scan LED Indicators The 7535 scanner LED (the lower-left LED) indicates whether or not your scan is successful. The LED behaves as follows: • • • Scan In Progress: scan LED displays solid red colour. Successful Scan: scan LED displays solid green colour and turns off when the scan is ended. Unsuccessful scan: scan LED flashes red. A bar code icon appears on the screen during a scan. While the scanner beam is active, the onscreen message states – SCANNING. If the scan is successful, the bar code data is displayed on the screen until the scan button (or pistol trigger) is released. Psion Teklogix 7530 Hand-Held Computer User Manual 49 Chapter 3: Getting To Know Your 7530 Troubleshooting 3.7.3 Troubleshooting If the scanner is not working, investigate the following: • Is the 7530 on? • Check that the bar code symbology being scanned is enabled for the 7535 you are using. Check any other parameters that affect the scanning procedure or the bar code. • Check the bar code to make sure it is not damaged. Try scanning a different bar code to verify that the problem is not with the bar code. • Check that the bar code is within the proper range. • Does the hand-held display the warning without scanning? This suggests a hardware problem in the 7530. • Is the laser beam scanning across the bar code? • Once the scan beam has stopped, check the scanner window for dirt or fogging. 3.7.4 Operating One Dimensional (1D) Internal Laser Scanners • Turn the 7530 on. Wait until the unit has booted up completely. Important: • 50 If an aiming dot is available on the installed scanner, the dot will be enabled for a configurable time period (including off), after which normal scanning begins. Refer to “Dot Time (msec)” on page 120 for details. Double-clicking the trigger will override the aiming delay and initiate an immediate scan. Note that the aiming dot is standard on long-range and high visibility internal scanners. Aim at the bar code and press the scan key or the trigger. A scan beam and a warning indicator appear until a successful decode is achieved or six seconds have elapsed. Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 3: Getting To Know Your 7530 Operating Internal PDF Laser Scanners 3.7.5 Operating Internal PDF Laser Scanners This scanner decodes PDF417 two-dimensional bar codes. • • Turn the 7530 on. Wait until the unit has booted up completely. Aim at the bar code and press the scan key or the trigger. The beam expands into a rectangle covering the bar code to properly scan it. The scan beam and a warning indicator are visible until a successful decode is achieved or three seconds have elapsed. 3.7.6 Operating Internal Two Dimensional (2D) Imager Scanners An imager scanner takes a snap shot of a single bar code or multiple bar codes (at one time). It can find a bar code regardless of its orientation – that is, even a bar code printed at a 45 degree angle to the 7530 will be decoded successfully. Note: When scanning multiple bar codes, ensure that all of the desired bar codes are within the field of view of the scanner. It is possible that even when all bar codes are within the field of view, not all of them may be decoded. Only successfully decoded bar codes are passed to the application program. The application program then issues a warning, asking that you scan the missing bar codes. When scanning a single bar code, ensure that only the desired bar code is within the field of view of the scanner. Because imager scanners generally have a shorter depth of field than laser scanners, some practise may be required to find the optimal distance from the types of bar codes being scanned. Although the imager includes illumination LEDs, ambient light will help the imager decode the bar codes, especially if the bar code is far from the 7535. Important: • • Keep in mind that the imager scanner is a camera, and the LED illumination is a flash. Glare can be an issue on reflective media such as plastic coated bar codes, just as glare is an issue for photographers. When pointing at a shiny surface, either shift the bar code to the side or top, or angle the bar code so that the glare reflects away from the imager scanner. Turn the 7535 computer on. Wait until the unit has booted up completely. Aim at the bar code and press the scan key or the trigger. Psion Teklogix 7530 Hand-Held Computer User Manual 51 Chapter 3: Getting To Know Your 7530 Connecting & Disconnecting Tethered Peripherals • When the scan button or trigger is pressed, a red, oval shaped light (the framing marker) is displayed. Centre the framing marker in the field – either in the centre of the bar code you want to scan or in the centre of the area in which multiple bar codes are to be scanned. Illumination LEDs will flash and a picture of the bar code(s) is taken. 3.8 Connecting & Disconnecting Tethered Peripherals Tethered peripherals such as scanners and printers connect to the hand-held computer with a quick release, circular connector. When a peripheral is connected to the hand-held, the 7535 detects the peripheral and loads the necessary drivers for it. An icon in the taskbar at the bottom of the screen provides a visual representation of the peripheral and indicates that it is ready for operation. To attach the peripheral to the round, tether port on the side of the 7535: • Insert the barrel of the plug into the tether port and rotate slowly until it clicks into place. The red dot on the port and on the connector should be aligned. Figure 3.8 Attaching The Cable To The Tether Port 52 Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 3: Getting To Know Your 7530 Monitoring The Battery And Maximizing Run Time To remove the peripheral: • Grasp the shell of the plug, and pull it back gently to unlock and release the connector. Figure 3.9 Disconnecting The Tether Cable Important: Never attempt to disconnect a peripheral by pulling the connector by the wire. The connector is locked into place and can only be unlocked and removed by pulling back the plug shell. 3.9 Monitoring The Battery And Maximizing Run Time Under normal operating conditions, fully charged batteries last for 10 hours. As Lithium-Ion batteries age, their capacity decreases gradually, and they are generally considered depleted after approximately 2 years of use (less than 60% of original capacity remaining). Keep in mind however that heavy usage or operating the 7535 at temperature extremes will shorten the battery life. Lithium-Ion batteries do not require conditioning cycles and the 7535 battery system (including chargers) requires no user interaction to maintain peak performance. Psion Teklogix 7530 Hand-Held Computer User Manual 53 Chapter 3: Getting To Know Your 7530 Monitoring The Battery And Maximizing Run Time To maximize the run time of your batteries, consider the following: • • • The display backlight is the largest drain on the battery. Try to keep its brightness as low as possible. The hand-held is ‘event’ driven – that is, when the unit is not in use, it reverts to sleep mode (even when it appears to be running), saving battery power. Events include a key press, touchscreen taps and scan triggers. Power consumption is reduced if you avoid unnecessary events, and allow the unit to sleep as much as possible. The 7530 battery is a ‘smart battery’ with built-in intelligence. The taskbar battery icon is a linear gauge used to estimate the remaining run time of the battery. It is important to note that the battery capacity icon displays quarter percentages of nominal capacity (the capacity of a new battery). An aged battery, even when fully charged, shows somewhat less capacity than nominal. Double-tapping on the battery icon displays a dialogue box that provides detailed information about the battery status and performance. If the remaining capacity indication seems inaccurate, the battery may need recalibration. Recalibration requires that the battery be fully charged, discharged and then charged again before use. If the battery is fully discharged and charged on a regular basis, recalibration should not be necessary. • • • 54 When the hand-held is switched off, it goes into a low-power, suspend state but continues to draw a small amount of power from the battery. This should not be an issue unless the unit is left in suspend state for more than a week – in this case, the battery should be removed. Batteries left unused for durations of more than one or two months should be fully charged, discharged and then charged again before use. This recalibrates the gas gauge and allows the internal electronics to determine the actual capacity of the battery. The hand-held can determine when the useful life of the battery has expired and will notify the user. Chargers may reject batteries that have exceeded their lifespan. Psion Teklogix 7530 Hand-Held Computer User Manual Chapter 3: Getting To Know Your 7530 Storing Batteries 3.9.1 Storing Batteries Long term battery storage is not recommended. If storage is necessary: • • • • • Always try to use a ‘first-in first-out’ approach to minimize storage time. Lithium-Ion batteries age much faster at elevated temperatures. Store batteries at temperatures between 0˚ C and 20˚C. Always charge batteries to 40 to 60% before storing them. Batteries can be damaged by an over-discharge phenomenon that occurs when an empty battery is stored for a long period of time such that the cell voltage drops below a lower limit. To minimize storage degradation, recharge stored batteries to 40 to 60% every 4 or 6 months to prevent over-discharge damage. A ‘never used’ Li-Ion battery that has been stored for 3 years may have limited or no useful life remaining once put into service. Think of batteries as perishable goods. 3.10 Monitoring The Network Connection If your hand-held is equipped with a wireless LAN radio, it will typically associate with the nearest access point. The radio signal quality meter in the taskbar indicates the relative strength of the communication link. To access the radio signal icon from the keyboard: • • • • Press <BLUE> <0> to display the Start Menu. Choose System Tray from the menu. Use the <LEFT> and <RIGHT> arrow keys to highlight the radio signal icon in the taskbar. Press <ENTER> to display the wireless statistics box dialogue box. If you have a touchscreen: • Tap on the radio icon in the taskbar to display the wireless statistics dialogue box. Note: Moving in and out of the radio coverage area can have varying effects on a network session. At times, you may need to renew your connection by logging in again. Psion Teklogix 7530 Hand-Held Computer User Manual 55 ">
/
Ladda ner
Bara en vänlig påminnelse. Du kan visa dokumentet här. Men viktigast av allt, vår AI har redan läst det. Den kan förklara komplexa saker på ett enkelt sätt, svara på dina frågor på vilket språk som helst och hjälpa dig att snabbt navigera även de längsta eller mest komplicerade dokumenten.
Offentlig länk uppdaterad
Den offentliga länken till din chatt har uppdaterats. You may view and manage your chat links after registration here.
Offentlig länk till dokument
Annons
