PDF

Add to my manuals
8 Pages

advertisement

PDF | Manualzz

Operating Instructions Manual

Hydraulic Transmission Jack, Telescopic

Model

41000C

41001C

(air option)

Capacity

1000 lb.

1000 lb.

Model 41000C Model 41001C

U.S. Patent No. 5,341,723

!

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

!

AdveRTenCIA

• Leer, comprender, y seguir las instrucciónes antes de utilizar el aparato.

• El manual de instrucciónes y la información de seguridad deben estar comunicado en lengua del operador antes del uso.

• No seguir estas indicaciónes puede causar daños personales o materiales.

!

WARNING

To avoid crushing and related injuries:

neveR work on, under or around a load supported only by a hydraulic jack. Immediately transfer the load to an appropriate work station.

SFA Companies

http://www.omegalift.com

Read this manual and follow all the Safety Rules and Operating Instructions before using this product.

Printed in China

41000C-M2 10/10

SAFeTY And GeneRAL InFORMATIOn

Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of this jack, remove from service immediately.

Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any jack that appears damaged in any way, or operates abnormally shall be removed from service immediately. If the jack has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately discontinue use until jack has been checked by a factory authorized service center (contact distributor or manufacturer for list of authorized service centers). It is recommended that an annual inspection be done by qualified personnel.

Labels and Operator's Manuals are available from manufacturer.

PROdUCT deSCRIPTIOn

Hydraulic Transmission Jack is designed to be used as an aid in the removal and installation of automotive and light truck transmissions, transfer cases and transaxles. This telescopic style transmission jack is for use under an overhead lift or in a garage pit. On air option model 41001C, ensure that your air source can dedicate 7.8 CFM @

110-175 psi to each jack operated.

!

SPeCIFICATIOnS

Model Capacity

Min.

Height

41000C

Saddle Base

1000 lb 37-3/4" 78-1/8" 8-7/8" x 7-1/8"

41001C

Max.

Height

Extended

Saddle Area

21" x 21"

Jack Size

(L) x (W)

33-5/8" x 33-5/8"

2

PRePARATIOn

Assembly (refer to Figure 1)

Tools required: 1/2" box end wrench, 19mm wrench, 3/8" hex socket & torque wrench.

1. Three major parts should be included in the package:

(a) Hydraulic unit Assembly;

(b) Saddle Assembly;

(c) 2 pieces of base half with hardware.

2. Attach either one of the two base halves to the base of the hydraulic unit, then secure using allen head bolts and washers provided. Apply the same procedure to the other base half. Use torque wrench to tighten to 30 lb.ft. Do not overtighten.

3. Place the socket of the saddle assembly onto the ram piston. Tighten set screw on the socket.

Before Use

1. Verify that the product and application are compatible, if in doubt call Omega Technical Service (888) 332-6419.

2. Before using this product, read the operator's manual completely and familiarize yourself thoroughly with the product, its components and recognize the hazards associated with its use.

3. Press the release valve pedal, ensure that saddle is fully lowered. Remove shipping screw and replace with provided vent screw (shipping screw is located above the oil filler screw).

4. Remove the oil filler screw. Ensure oil level is just below the rim of oil filler hole. Reinstall the oil filler screw.

5. For air option model 41001C, pour a teaspoon of good quality, air tool lubricant into the air supply inlet of the lift control valve. Connect to air supply and operate for 3 seconds to evenly distribute lubricant.

note: This unit is equipped with the popular 1/4” NPT air coupler. When installing a different air coupler of your choice, ensure that thread tape or compound is used when servicing connections. To ensure dependable, trouble free operation an inline air dryer and oiler is recommended.

6. Ensure that jack rolls freely. Raise and lower the unloaded jack throughout the lifting range before putting into service to ensure the pump operates smoothly. Replace worn or damaged parts and assemblies with Omega authorized replacement parts only.

Saddle Plate

Saddle Socket

Tilt Adjustment Knobs

Hydraulic Unit

Position Handle

*Air Supply Inlet

*Air Pump Pedal

Ratchet Bracket

Shipping Screw

(replace w/ Vent Screw before initial use)

Oil Filler Screw

*Air Motor

Lift Pedal

Release Valve Pedal

Base Half

(*) For air option model 41001C only

Figure 1- Typical Transmission Jack Components (41001C shown)

3

Caster

!

WARNING

Read, understand, and follow all printed material provided with and on this product before use.

do not exceed rated capacity.

• Use only on hard, level surfaces.

• Adequately support the vehicle before starting repairs.

• If loaded jack must be moved, make certain that load is secured by appropriate means, is stable, is in the lowest possible position, is moved over a smooth, hard level surface and that the lifting platform

is level.

• Use of this product is limited to removal, installation, and transportation of automotive and light

truck transmissions, transfer cases and transaxles.

• Use only adapters / accessories provided by the manufacturer of this transmission jack.

• Use only adapters / accessories whose rated capacity is greater than the rated capacity of this jack.

• Ensure the center of gravity is center loaded on the saddle.

• Never use this device as a work/repair station. Transfer the load immediately to a suitable work station.

• No alteration shall be made to this product.

Failure to heed these markings may result in personal injury and/or property damage.

!

WARNING

To avoid crushing and related injuries:

never work on, under or around a load supported only by hydraulic jack.

Be alert and sober when using this product. Do not operate under the influence of drugs or alcohol.

OPeRATIOn

Follow the instruction for removal and installation of transmission, transfer case or transaxle according to the vehicle manufacturer's service manual.

Raise saddle assembly:

Pump foot pedal or press air pump pedal (Model 41001C) until saddle reaches desired position. Secure load with provided chains.

note: DO NOT OPERATE BY AIR AND BY HAND PUMPING AT THE SAME TIME.

!

transmission could cause the jack to tip or flip over .

Lower saddle:

!

Maintain control of the rate of speed at which the load lowers at all times!

Slowly, gently apply downward pressure to the release valve pedal.

!

Never use this jack as a workstation!

4

MAInTenAnCe

Important: Use only good grade hydraulic jack oil. Avoid mixing different types of fluid and NEVER use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause premature failure of the jack and the potential for sudden and immediate loss of load. Mobil DTE 13M or equivalent recommended.

Adding oil

1. With saddle fully lowered, set jack in its upright, level position. Remove oil filler screw.

2. Fill until oil is level with the oil filler screw hole, reinstall oil filler screw.

Changing oil

For best performance and longest life, replace the complete fluid supply at least once per year.

1. With saddle fully lowered, remove oil filler screw.

2. Lay the jack on its side and drain the fluid into a suitable container.

note. Dispose of hydraulic fluid in accordance with local regulations.

3. Set jack in its level position. Fill until oil is level with the oil filler screw hole, reinstall oil filler screw.

Lubrication

1. A periodic coating of light lubricating oil to pivot points, axles and hinges will help to prevent rust and assure that casters and pump assemblies move freely.

2. For air option models 41001C: When used on a daily basis, air pump model should be internally lubricated before each use. Use only good quality air tool lubricant. If no inline oiler is used, pour a teaspoon of air tool oil into the inlet of the air supply inlet. Simply operate the jack using the air feature in order to fully distribute the oil.

Cleaning

Periodically check the pump piston and ram for signs of rust or corrosion. Clean as needed and wipe with an oily cloth.

note: Never use sandpaper or abrasive material on these surfaces!

Storage

When not in use, store the jack with saddle fully lowered.

TROUBLeSHOOTInG

Symptom

Jack will not lift load

Jack will lift, but not maintain pressure

Possible Causes

• Release valve not tightly closed

• Load is too heavy

• Release valve not tightly closed

• Hydraulic unit malfunction

Jack will not lower after unloading • Reservoir overfilled

Poor lift performance

• Linkage binding

• Fluid level low

• Hydraulic unit malfunction

Jack will not lift to full extension • Fluid level low

5

Corrective Action

• Ensure release valve tightly closed

• Consider higher capacity jack

• Ensure release valve tightly closed

• Discontinue use, Contact Omega

Tech. Service

• Ensure load is removed, then drain fluid to proper level

• Clean and lubricate moving parts

• Ensure proper fluid level

• Discontinue use, Contact Omega

Tech. Service

• Ensure proper fluid level

RePLACeMenT PARTS

(page 6 & 7)

Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, please give the Model number and parts description. Call or write for current pricing: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A.

E-Mail: [email protected] Tel: (888) 332-6419 Fax: (816) 891-6599 Website: http://www.omegalift.com

Replacement Parts Illustration for Models 41000C and 41001C:

27 41000C Replacement

Parts

26

42

41

40

9

12 39

38

37

7

8

10

36

49

48

11

13

34

33

32

31

15

14

16

35

30

6

5

47

46

44

6

43

45

18 28

29

28 4

3

19 1

17

2

41001C Replacement

Parts

11

12

10

13 47

46

45

49

48

18

17

19

34

33

32

31

9

8

44

43

20

15

14 21

22

16

28

29

42

41

40

39

38

23

35

24

25

30

37

36

6

5

6

26

27

7

3

1

4

2

6

Replacement Parts List for Models 41000C & 41001C:

Item Part No.

Description

1 G360-20000-000 Leg Assembly

2 G360-90030-K04 Bolt Set (4 sets)

3 G360-90030-K02 Caster, 3" Dia.

4 G360-90030-K01 Caster w/ Brake

5 5105-08015-000 Socket Head Bolt

6 4200-03500-000 Tilt Screw Assy.

7 G360-40000-000 Saddle Head Assembly

8 A070-90038-K02 Screw Assembly

9 G360-90009-K01 Vent Screw Assembly

10 G390-20000-000 Handle Assembly

11 G251-00007-000 Handle Grip

12 5104-10040-000 Bolt

13 5206-00010-000 Nylon Nut

2

1

1

1

1

1

2

1

2

2

2

Qty.

2

1

15 5405-07027-000 Pin (2pc. for 41001C)

16 5405-02018-000 Retaining Pin (2pc. for

17 G390-30000-000 Lift Pedal

18 5405-12070-000 Axle

19 5405-02028-000 Retaining Pin

21 G360-10003-000 Air Hose (41001C only)

22 G360-10002-000 Spring (41001C only)

24 G360-17000-000 Air Motor (41001C only)

25 5308-00120-000 Copper Washer (41001C

26 G390-41000-000 Nylon Strap Assy

27 5102-10016-000 Bolt

1

1

1

2

1

1

1

1

1

1

1

1

1

1

Repair Kit Contents:

Item Description

28 U-Cup, Ram

29 O-Ring

30 O-Ring

31 O-Ring

32 Back-up Washer

33 O-Ring

34 O-Ring

35 Filter

36 O-Ring

37 Back-up Washer

38 Back-up Washer

39 O-Ring

40 O-Ring

41 Back-up Washer

42 Seal

43 Seal

44 Back-up Washer

45 Back-up Washer

46 O-Ring

47 O-Ring

48 O-Ring

49 Back-up Washer

G3601S-111 (41000C)

G3600S-130 (41001C)

1

Repair Kit for Hydraulic

Unit (includes parts

28 - 49)

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

3

1

Qty.

2

1

7

One YeAR LIMITed WARRAnTY

For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy.

Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.

Except where such limitations and exclusions are specifically prohibited by applicable law, (1) THE

CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE

PRODUCTS AS DESCRIBED ABOVE. (2) SFA Companies SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL

OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS

PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER,

AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION,

ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND

IS NOT COVERED BY THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

8

SFA Companies

10939 N. Pomona Ave. Kansas City, MO 64153

888-332-6419 [email protected]

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement