157 ga AN TE EI im]
in
WATERPROOF BLUETOOTH
SHOWER SPEAKER
BTS-06
USER MANUAL
Thank you for choosing our product. We
hope you will enjoy it very much.
Safety instructions
Read this manual carefully before putting
the appliance into operation and keep this
manual for future reference.
- Keep the device away from heat,
direct sunlight and sharp edges.
. Keep the device away from naked
flames.
- Do not insert any metal object into the
device. Risk of short circuit!
. Toavoid a static charge, do not use
the device in an extremely dry climate.
. Donot repair the unit yourself but
contact an authorised specialist.
Product overview
Accessories included
1. USB charging cable
Charge Integrated Battery
This Bluetooth speaker is powered by
integrated rechargeable lithium battery.
Charge the battery as follows:
1. Insert the charging cable into the DC
5V socket on the unit. Connect the USB
plug into a PC or AC/DC adaptor. The
LED indicator turns red and the battery
is being charged.
2. When the battery is fully charged, the
red LED indicator goes out.
Pairing BTS-06 to mobile phone
or other device
Activate the Bluetooth speaker’s pairing
mode by, when in power off mode, press
and hold the on/off button for about 6
seconds until the red LED and blue LED
are flashing alternatively. Now the speaker
is ready for pairing.
Tips:
Please make sure the speaker is in power
off mode when trying to activate the
pairing mode.
1. Turn on your mobile phone and activate
the Bluetooth function.
2. Search for Bluetooth devices. BTS-06
will show up.
3. Pair your device with BTS-06 .If
password is needed, type in “0000".
After BTS-06 is paired with your
device, connect it to your device.
Tips:
Once this speaker is paired and connected
to your mobile phone, next time when you
switch on this speaker, 1t will connect to
your mobile phone automatically as long
as the Bluetooth in your mobile phone is
on.
Button description
(D On/Off: To switch on or off the unit.
[44 Short press for the previous song,
long press for turning down the volume.
>>I Short press for the next song,
long press for turning up the volume.
. Phone: To pick up or hang up a phone
call
Pil Play/Pause the music.
Notes & tips:
1. You can press Phone button twice
quickly to redial the last phone call.
Troubleshooting
Symptoms | Causes Solutions
Can not Battery Charge the
switch the empty battery
speaker on
Unable to Speaker is Refer to the
pair the already section of
speaker switched “Pairing BTS-06
on, and it to mobile
is not in phone or other
pairing device”
mode.
Technical Specifications
Bluetooth support
Range: 10 meters
Transmitting frequency: 2.4GHz
Power supply: DC5v/100-120mA
Battery: 3.7v400mAh lithium
Charging time: approx. 3 hours
Operating time: approx. 6 hours
IP grade: IPx4
Unit weight: approx. 0.1kg
FCC STATEMENT
1. This device complies with Part 15 ofthe FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class В digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:.This equipment complies with FCC
radiation exposure requirement. The device canbe used in portable exposure
condition without RF striction
">
