Shenzhen Xinhuamei Electronics BTS 03 Bluetooth speaker User manual

BLUETOOTH SPEAKER

BTS-03

USER MANAL

Thank you for choosing our product. You will enjoy its sound and form.

Safety instructions

Read this manual carefully before putting the appliance into operation and keep this manual for future reference.

Product overview

electrical shock, subject the device

neither to rain nor to humidity. Do not

operate the device in the direct

proximity of water (e.g. bathroom,

swimming pool, etc.).

direct sunlight and sharp edges.

flames.

device. Risk of short circuit!

humid or muggy environment.

the device in an extremely dry climate.

contact an authorised specialist.

DC 5V AUX LED indicator

On/Off switch

Accessories included

1. Line-in cable

2. USB charging cable

Charge Integrated Battery

This Bluetooth speaker is powered by integrated rechargeable lithium battery.

Charge the battery as follows:

1. Insert the Micro USB plug into the DC

5V socket on the unit. Connect the USB

plug into a PC or AC/DC adaptor. The

LED indicator turns red and the battery

is being charged.

2. When the battery is fully charged, the

red LED indicator goes out.

Pairing BTS-03 to mobile phone or other device

1. Switch on the speaker.

2. Turn on your mobile phone and activate

the Bluetooth function.

3. Search for Bluetooth devices. BTS-03

will show up.

4. Pair your device with BTS-03. If

password is needed, type in “0000".

After BTS-03 is paired with your

device, connect it to your device.

Once this speaker is paired and connected to your mobile phone, next time when you switch on this speaker, it will connect to your mobile phone automatically as long as the Bluetooth in your mobile phone is on.

Button description

-

Volume down

+

Volume up

1. To pick up a phone call, press

this button quickly.

2. To reject a call, press and hold

this button for about 2 seconds.

3. To redial the latest phone

phone number, press this

button twice quickly.

Troubleshooting

Symptoms Causes

Can not switch the speaker on

Battery empty

Solutions

Charge the battery

No sound when playback via

Bluetooth

AUX cable is connected

Remove the

AUX cable

Volume control no function

You are using speaker via AUX

Control the volume through the audio source

Technical Specifications

Audio connection: Bluetooth, and 3.5mm

stereo jack plug

Bluetooth version: 3.0

Range: 10 meters

Transmitting frequency: 2.4G Hz

Power supply: DC5v/100-120mA

Battery: 3.7v 400mAh lithium

Charging time: approx. 3 hours

Operating time: approx. 6 hours

Unit weight: approx. 0.229kg

Notes & tips:

1. When using line-in (AUX) function, the

volume control on the speaker has no

function.

FCC ID: R8H-BTS-03

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 。

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

The antenna(s) used for this device must be installed to provide a separation

distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.