正 面:
Stereo BluetoothHeadphone
H2A/H2C/H2D/H2E USER MANUAL
Table of contents
1 Introduction
2 Kit Contents
3 Connection Diagram
4 How to use
4.1 General functions
4.2 Pairing to mobile phone
4.3 Charging your
device
5
Technical specification
6 Service and Support
7 FAQ
5
6
6
2
3
5
2
2
1
1
H2A/H2C/H2D/H2E USER MANUAL
1. Introduction
Congratulations, and thank you for choosing the Bluetooth
Headphone . This manual will help you operate the Bluetooth
Headphone, but you should familiar with the Bluetooth function of your mobile phone or other master devices before using the Bluetooth Headphone .
Safety Rules
1 \ To ensure safety, please follow this user manual, we strongly recommend the users to read this manual before using the Bluetooth headphone.
2 \ Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage.
3 \ Do not modify, repair or dismantle this Bluetooth
Headphonet. Doing so may result in fires, electric shocks, complete break down of this Bluetooth Headphone, etc. All of which, are not covered under warranty.
4 \ Do not use any diluents or volatile liquid to clean the
Bluetooth Headphone.
5 \ Do not use the Bluetooth Headphone in a hazardous location.
2.Kit Contents
1X Bluetooth Headphone H2A/H2C/H2D/H2E
1X USB Charger Cable
1X User Manual
1
H2A/H2C/H2D/H2E USER MANUAL
3.Connection Diagram
Previous
Volume up
MFB(Multi Function Buttons)
Turn on/Turn off /
Enter the pairing mode/
Play / pause/
Answer call/End call/
Reject call/Transfer call voice
/Last number redial
Next
Charging
MIC
Volume down Factory reset
4.How to use
4.1. General Functions
Desired Result Required Action
Turn on
Turn off
Enter the pairing mode
Pairing
Press the ”MFB” button for 2 seconds when the device is off. (Red LED light and a tone voice beep)
Press the ”MFB” button for 3 seconds when the device is on.(a tone voice beep and all
LED is off)
Press the ”MFB” button in power off mode and hold on for 5 seconds.(Blue LED and
Red LED quickly flash alternately with two beep tone voice).
In pairing Mode use a mobile phone with
Bluetooth function or other Bluetooth Master
Device and to perform pairing action(detail refer to the chapter about pairing).
Low battery warning
The red LED flash.
2
H2A/H2C/H2D/H2E USER MANUAL
Desired Result
Charging
Answer call
End call
Reject call
Required Action
Plug the charger to port of the device
(Red LED is on).
Short click ”MFB” the button while the incoming cal.
Short click the ”MFB” button while ongoing call
.
Press the ”MFB” button for 1-2 seconds to reject call when the call is ringing
Last number redial
Transfer call voice
Play/pause
Volume up
Volume down
Next
Previous
Fast backward
Fast forward
Multi-point connection
Factory reset
Double click the ”MFB” button In the connected state or there is music
Double click the ”MFB” button to transfer the call voice between the mobile phone and device while ongoing call.
Click ”MFB” button to play music when the device is connected or pausing and click
”MFB” button to pause when the device is playing music.
Short click the ”+” button
Short click the ”-” button
Short click “>” button for next music.
Short click“<” button for Previous music.
Press the “<”button don't loose
Press the “>”button don't loose
In pairing mode, short click the “MFB” to enable the multipoint and double click the
“ MFB” to disable the Multipoint.
Under the pairing mode Long press “MFB ” and”-” button for 5 second at the same time .
4.2. Pairing to Mobile phone or other device
To use your Bluetooth Headphone
, you must first pair your
Headphone with a phone or a computer .
Once your Bluetooth
3
H2A/H2C/H2D/H2E USER MANUAL
Headphone is paired to a specific mobile phone; they will remain paired and automatically recognize each other whenever they are within range.
Pairing to a phone and Entertainment:
Turn on your phone and ensure its Bluetooth function
is activated
Turn on the Bluetooth Headphone go to the paring mode.
Search your Bluetooth devices on your phone by
following the phone's instructions. Refer to your phone's
user manual for more information.
After a few second the phone will list the device as a
discover device. Select it and follow your phone
instruction to select this pairing.
Your phone will confirm the pairing, and then press Yes/Ok.
Finally, select to connect with device from your phone.
You can play music, watch TV/movie and play game with
your phone, then your can hears all the sound or music
form the device. Also you can control the player by
operating the device. For example: volume up or next
music.
Pairing to a computer and Entertainment:
If there is no Bluetooth function supported by your computer,
a Bluetooth adapter is necessary. Fix the adapter with your
computer and ensure its Bluetooth function is activated.
Turn on the device go to the paring mode.
Open the Bluetooth software (such as BlueSoleil) Which is
installed on your computer, and selects “Search your
Bluetooth devices” function. Refer to user manual of the
Bluetooth software for more information.
After a few second the “device name” will list in Bluetooth
software of your computer as a discover device.
Select this icon and click right button of mouse to select
“Pairing” item, then select “connect with audio device”
with same operation.
4
H2A/H2C/H2D/H2E USER MANUAL
Open your media player software to play music, watch TV/
move and play game, then all the sound will be playback on
your device.
4.3. Charging your device
This Headphone use USB to Micro USB charger. It is convenient to connect to AC charger or a USB Charger. Make sure that your device is full charged at least 6 hours at first time use. Insert one terminal of your charger to AC or PC USB port and other Connect to headset, when the headset in charging the red LED light constantly. When charging is completed, the red LED turns off and the Blue Led turn on.
Warning:
You must select a qualified charger from a regular manufacturer.
You must charge the Bluetooth Headset if it has been not used for more than 12 months.
5.Technical specification
Parameter
Bluetooth
Specification
Bluetooth Profile
DSP
RF Range
Frequency
Response
Loudspeaker
Output
Signal-To-Noise
Bluetooth V4.0
A2DP1.2 AVRCP1.4 HSP1.2 HFP1.6
CVC6.0 Noise and Echo reduction
10 m
20mW
≥ 90dB
5
Value
80Hz-20KHz
H2A/H2C/H2D/H2E USER MANUAL
Parameter Value
Distortion
Playback Time
Charging Time
Dimension
(L × W × H)
≤ 1.0% about 12.5 hours about 3 hours
165.7x161.5x50mm
Weight about 130g(H2A) about 125g(H2C)
6.Service and Support
If you device is not working properly, please contact the local service providers or dealer for service.
7. FAQ
1\ Why is there no power even when the Headphone is power on?
Ans: Ensure the battery is being charged up to 6 hours for first
time using. The LED is lighted when it starts charging.
2\There is no sound when playback.
Ans: Check the connection between your device with phone
or computer, if the connection is not established, please
reconnect again. Make sure the Headset is paired and
connected with your target phone or other master device.
3\How can I know the Bluetooth Headphone has been fully charged?
Ans: When the indicator LED turns from red to blue during
charging ,this indicate the battery has been fully charged.
4\Why the headphone cannot connect to second phone
Ans: Please set the headset to pairing mode and short press
the “MFB” to enable multipoint mode. Connect the
headset to phone A, Restart the headset to pairing mode
and connect the Headphone to phone B, and then use phone A paired device list to reconnect to the headphone.
6
H2A/H2C/H2D/H2E USER MANUAL
Warning:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device,pursuant to Part 15 of the
FCC Rules.
These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and,if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures: --
Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
6 1
