BLUETOOTH STEREO HEADPHONE
H7 USER MANUAL
Table of contents
1 Introduction
2 Kit Contents
3 Connection Diagram
4 How to use
4.1 General function
4.2 Pairing to mobile phone
4.3 Charging your
device
5 Technical specification
6 Service and Support
7 FAQ
2
3
2
2
5
1
1
5
6
6
H7 USER MANUAL
1.Introduction
Congratulations, and thank you for choosing the Stereo Bluetooth
Headset H7. This manual will help you operate the Bluetooth Headset, but you should familiar with the Bluetooth function of your mobile phone or other master devices before using the Bluetooth Headset at first.
Safety Rules
1\To ensure safety, please follow this user manual, we strongly
recommend the users to read this manual before using the Bluetooth
headset.
2\ Be more wary of any edges, uneven surfaces, metal parts,
accessories and its packaging so as to prevent any possible injury or
damage.
3\ Do not modify, repair or dismantle this Bluetooth Headset. Doing so
may result in fires, electric shocks, complete breakdown of this
Bluetooth Headset, etc. All of which, are not covered under warranty.
4\ Do not use any diluents or volatile liquid to clean the Bluetooth
Headset
5\ Do not use the Bluetooth Headset in a hazardous location.
2.
Kit Contents
1X STEREO Bluetooth
Headset H7
1 X USB charging cable
1X audio cable
1X User Manual
1 X H7 carrying case
01
H7 USER MANUAL
3.Connection Diagram
Volume up
Enter the pairing mode
Volume down
Turn on/
Play / pause/
Turn off /
Answer call/
End call/
Reject cal/
Transfer call voicel
MIC
3.5mm Earphone
Next
Previous
Charging
4.How to use
4.1General Functions
Desired Result
Turn on
Enter the pairing
Mode
Pairing
Required Action
Press the “ ” button for 3 seconds when the device is off. (Pink LED slowly flashes and a tone voice beep)
Press the “ +” “ -” button in power on mode and hold on for 6 seconds.(white LED and
Red LED quickly flash alternately with two beep tone voice).
In pairing Mode use a mobile phone with
Bluetooth function or other Bluetooth
Master Device and to perform pairing action (detail refer to the chapter about pairing)
02
H7 USER MANUAL
Desired Result
Turn off
Low battery warning
Charging
Answer call
End call
Transfer call voice
Reject call
Volume up
Volume Down
Next
Previous
Battery power indication
Required Action
Press the “ ” button for 3 seconds when the device is on.(a tone voice beep and all LED is off)
The red LED flash
Plug the charger to port of the device.
(Red LED is on)
Short Press the “ ” button while the call coming
Short Press the “ ” button while ongoing call
Double Press the “ ” button to transfer the call voice between the mobile phone
and device while on going call
Press the “ ” button for 1~2 seconds to reject call when the call is ringing
Short Press the “+” button for volume up
Short Press the “-” button for volume down
Short Press “>” button for next music
Short Press “<” button for Previous music
After pairing this device to iPhone The
Battery power will be indicated in your iPhone
Play/pause Short press “ ”key to play/pause the music when the Headset is Connected
Multi-point connection In pairing mode, short press the to enable the multipoint and double press the
MFB to disable the Multipoint
Factory reset Long press “>” “<” at pairing mode to reset clear the paired device list
03
H7 USER MANUAL
4.2. Pairing to Mobile phone or other device
To use your Bluetooth Headset, you must first pair your
Headset with a phone or a computer. Once your Bluetooth
Headset is paired to a specific mobile phone; they will remain paired and automatically recognize each other whenever they are within range.
Pairing to a phone and Entertainment:
Turn on your phone and ensure its Bluetooth function is
activated
Turn on the Bluetooth Headset go to the paring mode.
Search your Bluetooth devices on your phone by following the
phone's instructions. Refer to your phone's user manual for
more information.
After a few second the phone will list the device as a discover
device. Select it and follow your phone instruction to select
thispairing.
Then your phone will request a passkey or PIN;Enter 0000 as
your
PIN or passkey.
Your phone will confirm the pairing, and then press Yes/Ok.
Finally, select to connect with device from your phone.
You can play music; watch TV/movie and play game with
Your phone, then your can hears all the sound or music form
the device. Also you can control the player by operating
device.
For example: volume up or next music.
Pairing to a computer and Entertainment:
If there is no Bluetooth function supported by your computer,
a Bluetooth adapter is necessary. Fix the adapter with your
computer and ensure its Bluetooth function is activated.
Turn on the device go to the paring mode.
04
H7 USER MANUAL
Open the Bluetooth software (such as BlueSoleil) Which is
installed on your computer, and selects “Search your
Bluetooth devices” function. Refer to user manual of the
Bluetooth software for more information.
After a few second the “device name” will list in Bluetooth
software of your computer as a discover device.
Select this icon and click right button of mouse to select
“ iParing” item, then select “connect with audio device” with
same operation.
Open your media player soft to play music, watch TV/move
andplay game, then all the sound will be playback on your
device.
4.3 Line in input
H7 support 3.5mm audio jack line in when the battery low or somewhere Prohibit the use of wireless device, When the headset use line in, the Bluetooth will auto power off
4.4 USB audio input
The H7/H7X support USB audio input when charge with computer or laptops, when H7/H7X connect the PC or Laptops with USB cable, it will auto emulate as a USB audio device.
4.5. Charging your device
This Headset use USB to Micro USB charger. It is convenient to connect to AC charger or a USB Charger. Make sure that your device is full charged at least 6 hours at first time use. Insert one terminal of your charger to AC or PC USB port and other Connect to H7/H7X, when the H7/H7X in charging the red LED light constantly. When charging is completed, the red LED turns off and the white Led on.
Warning:
You must select a qualified charger from a regular manufacturer.
You must charge the Bluetooth Headset if it has been not used for more than 12 months.
05
H7 USER MANUAL
5.Technical specification
Parameter
Bluetooth
Specification
Bluetooth Profile
RF Range
Frequency
Response
Loudspeaker
Output
Signal-To-Noise
Distortion
Playback Time
Charging Time
Standby time
Weight
Dimension
(L × W × H)
Value
Bluetooth V
3
.0
HFP1.6 A2DP1.2
10 m
60Hz-20KHz
10mW
≥ 85dB
≤ 1.0%
10 hours
2 hours
30 days
250g
176.6
× 188.6
× 71mm
06
H7 USER MANUAL
6.Service and Support
If you device is not working properly, please contact the local service providers or dealer for service.
7.
FAQ
1 \ Why is there no power even when the Headset is power on?
Ans: Ensure the battery is being charged up to 6 hours for first time using.
The LED is lighted when it starts charging.
2 \ There is no sound when playback.
Ans: Check the connection between your device with phone or computer,
if the connection is not established, please reconnect again. Make
sure the Headset is paired and connected with your target phone or
other master device.
3 \ How can I know the Bluetooth Headset has been fully charged?
Ans: When the indicator LED turns from red to white during charging ,this
indicate the battery has been fully charged.
4 \ why the headset cannot connect to second phone Please set the headset to pairing mode and short press the to multipoint mode
Connect the headset to phone one,
Press the “+” and “-“ button for 6second to enter to pairing mode, and connect the Headset to phone two, and then use phone one paired device list to reconnect to the headset.
FCC Warning:
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
07
15.105(b)
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Informa t ion(MPE)
FCC RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
