Spirent NG2 Tech-X Flex User Guide

Below you will find brief information for Tech-X Flex NG2. The Tech-X Flex NG2 handheld test set is a versatile, modular device with a wide variety of testing capabilities for home networks. You can use it to emulate various devices on a home network and test connectivity using Wi-Fi, Ethernet, and MoCA interfaces. It can also test video quality and perform RF signal analysis. The Tech-X Flex NG2 can also integrate with a centralized back-office system for field unit management.

PDF Download
Document
Tech-X Flex NG2 User Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Ethernet and Wi-Fi connectivity
  • MoCA network synchronization
  • RF signal analysis
  • IP and video testing
  • Modular design
  • Centralized back-office integration
  • Handheld format
  • Broadband service testing
  • Wireless AC support
  • Spectrum analysis

Frequently asked questions

The Tech-X Flex supports a wide range of testing capabilities, including Ethernet and Wi-Fi connectivity, MoCA network synchronization, RF signal analysis, and a full suite of IP and video testing capabilities.

The Tech-X Flex is designed to assist with the setup and troubleshooting of home networks, especially those using broadband services delivered by high-speed DSL, cable, and fiber-to-the-premises (FTTP) architectures.

The Tech-X Flex can emulate various devices commonly found within a home network, such as computers and other internet-connected devices.

Yes, the Tech-X Flex is modular, with a base unit and optional modules that can be added for expanded functionality.

The Tech-X Flex is designed to assist technicians in the setup and troubleshooting of home networks, particularly those using broadband services.

This device supports firmware version v06.50.
Preparing document for printing…
0%