SUNPARK ELECTRONICS CORP. 120-3/32 1S Electronic Ballast Installation Instruction
Below you will find brief information for Electronic Ballast 120-3/32 1S. This electronic ballast is designed for indoor and outdoor use, with a power factor of greater than 0.95, low harmonic distortion, and a sound rating of A. It is compatible with 32wT8 fluorescent lamps and has a power consumption of 91 watts for three lamps installed. The ballast is UL and cUL recognized, ensuring safety and reliability. The unit is compatible with 120V AC input and has a class P rating.
PDF
Download
Document
Advertisement
Advertisement
ELECTRONIC BALLAST INSTALLATION INSTRUCTION Model: 120-3/32 1S CAUTIONARY NOTES: Do not use this equipment for other than intended use. 1. Verify that the line voltage matches the ballast voltage. 2. Installation to be made by a qualified person in accordance with applicable codes. Warning This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. Features 120V AC input Power factor: > 0.95 Low harmonics Class P Sound rating A UL, cUL recognized. File E177888 Indoor / outdoor use. Lamp type & power consumption : Lamp Power consumption [Watts] 32wT8 x3 91 Before installation 1. Disconnect line voltage before installing or replacing lamp. 2. Ballast case must be grounded. 3. Place the ballast to a stable support and fix it. installation | 1. Connect the lamps to the ballast according to the label . Ballast supports only the type of lamps specified on the product label. 2. Connect the AC power line. Connect the black wire to L terminal and white wire to N terminal of the AC source. 3. Connections of power wires must be fully insulated. SUNPARK ELECTRONICS CORP. ">

Public link updated
The public link to your chat has been updated.
Advertisement