TDC Power Products Electronic Ballast Instruction manual
Below you will find brief information for Electronic Ballast. This TDC Electronic Ballast is designed to drive one or two lamps, either T5-54 Watts or PLL-55 Watts, with an input voltage between 100 to 277 VAC. It has been built to allow luminary manufacturers and users to create elegant products with especially high efficiency and good light control features. It will increase the luminous flux and provide a longer lamp life. This electronic ballast promises to benefit both economically and professionally.
Advertisement
Advertisement
Advertisement
Key features
- Drives one or two T5-54 or PLL-55 Watts lamps
- Input voltage: 100 to 277 VAC
- High efficiency and good light control
- Increases luminous flux and extends lamp life
- Economical and professional benefits
Frequently asked questions
It supports either T5-54 Watts or PLL-55 Watts Fluorescent lamps.
The input voltage ranges from 100 to 277 VAC.
No. This electronic ballast cannot be used with a dimmer or in a dimming circuit.