Trans Electric BY4BTR212 BluetoothMusic Receiver User Manual

Add to My manuals
2 Pages

advertisement

Trans Electric BY4BTR212 BluetoothMusic Receiver User Manual | Manualzz

Bluetooth Music Receiver

RF-BTR212

QUICK SETUP GUIDE

v1

R6

Wirelessly stream music from your iPhone, iPad, or other Bluetooth-enabled device to your home stereo or other audio device.

Package contents

• Bluetooth Music Receiver

• AC/DC adapter

• Quick Setup Guide

• 6 ft 3.5 mm stereo audio cable

• 3.5 mm jack to RCA stereo audio plug adapter

Features

• aptX® audio decoding: The highest Bluetooth stereo audio quality possible

• Optical digital audio output: The highest quality audio connection to your home stereo

• Analog stereo audio output: easily connect to amplified speakers or any device with an audio input jack

• Transmits up to 33 feet (10 m)

• Wall mount feature

• Remembers up to eight Bluetooth devices

Note : Music can be played from only one device at a time.

Front view Back view

Top view

LED indicator

Bottom view

LED indicator:

• Lights blue when paired and connected to your Bluetooth device.

• Blinks blue when not connected to your Bluetooth device.

• Turns off when the AC/DC adapter is not connected or plugged in.

Setting up your Bluetooth Music Receiver

Optical digital audio cable

OR

6 ft 3.5 mm stereo audio cable

3.5 mm jack to RCA stereo audio plug adapter

Audio receiver, or other audio device with analog or digital input

You can choose either analog (good) or digital (best) cables to connect your Bluetooth

Music Receiver, depending on the connections available on your home stereo system.

Digital connection

1 Plug one end of an optical digital audio cable into the OPTICAL jack on your Bluetooth Music

Receiver.

2 Plug the other end of the optical digital audio cable into the Optical Digital Audio In jack on your home stereo system.

OR

Analog connection

1 Plug one end of the 6 ft 3.5 mm stereo audio cable (included) into the Audio Out jack on your

Bluetooth Music Receiver.

2 Plug the other end of the 6 ft 3.5 mm stereo audio cable into the Audio In jack on your home stereo system or other audio component. If your home stereo system does not have a 3.5 mm

Audio In connector, you must use a 3.5 mm jack to RCA stereo audio plug adapter (included).

Connecting power:

1 Plug the AC/DC adapter into the DC 5V jack on your Bluetooth Music Receiver.

2 Plug the AC/DC adapter into a wall power outlet. The LED indicator begins to blink blue to indicate that the unit is on and ready to be paired to your Bluetooth devices.

Pairing your devices using Bluetooth

Before you can use your Bluetooth Music Receiver with a Bluetooth device, you need to pair your device to the Bluetooth Music Receiver.

To pair your devices using Bluetooth:

1 Make sure that a compatible Bluetooth device (like a music player or phone) is turned on and within 33 feet (10 meters) of your Bluetooth Music Receiver.

2 Turn on your Bluetooth Music Receiver by plugging in the AC/DC adapter. The LED indicator blinks on and off slowly. Your Bluetooth Music Receiver is in pairing mode.

3 Go to the Bluetooth manager by doing the following: a For iPad/iPhone/iPod touch:

i. From your iPad/iPhone/iPod touch home page, click Settings .

From , click General .

From , click Bluetooth .

b For Android Phone/Tablet:

i. From your smart phone/tablet home page, click Settings .

ii. From the Settings menu, click Wireless and networks .

iii. Click to activate Bluetooth.

Click .

4 On the Bluetooth device, select Music Receiver in the list of found devices.

5 On the Bluetooth device, enter 0000 as the PIN, if prompted. The LED indicator lights blue on the Bluetooth Music Receiver.

6 If you are pairing with a computer, make sure that your Bluetooth Music Receiver is selected as the computer’s default playback device. See the computer’s documentation for instructions.

Notes:

Some devices, such as an iPhone, connect immediately after pairing so the LED on the

Bluetooth Music Receiver remains on. Other devices, such as notebook computers, may ask you if you wish to connect. In this instance, the LED continues to blink until a connection is established.

Your Bluetooth Music Receiver saves pairing information for up to eight devices. However, it can only be connected and playing content from one device at a time.

When you turn on your Bluetooth Music Receiver, it automatically connects to the last connected device if that device is in range. To connect to a different paired device, you have to disconnect from the currently connected device and manually connect to the other paired device.

Reconnecting your device:

If you move out of range or turn off the Bluetooth feature on your Bluetooth device, the

Bluetooth Music Receiver disconnects from your device.

When this happens, the LED will slowly blink on and off. To restore the connection:

Move the music device back into range (within 33 feet), and make sure there is a clear line of sight and there are no obstructions between the Bluetooth Music Receiver and the device.

The connection is automatically reestablished and the LED turns on.

Note : The auto connect feature may not work with some Bluetooth devices, if this occurs use your Bluetooth device settings menu to manually select the Music Receiver from the list of found Bluetooth devices.

Connecting to a different device:

If you want to switch from one device to another, follow these steps:

1 On your Bluetooth device you are currently connected to, disconnect the Bluetooth Music

Receiver in your Bluetooth device list.

The Bluetooth Music Receiver can now be connected to another Bluetooth Device.

2 Follow the section “Pairing the Bluetooth Music Receiver” to connect a new device.

LED status

Indication

Solid blue

Blinks blue

Off

Description

Paired with your Bluetooth Music Receiver

Blinks On/Off when not paired to your Bluetooth device

Turns off when the AC/DC adapter is not connected or plugged in.

Troubleshooting

No music from my audio device

• Make sure the Bluetooth Music Receiver AC/DC adapter cable is plugged in.

• Make sure an audio cable or an optical cable is correctly and firmly connected to the Bluetooth

Music Receiver.

• Make sure that the audio source selection of your audio receiver or other audio device is correct (analog audio or optical digital audio).

• Make sure the volume of the audio receiver or other audio device is set to a comfortable listening level.

• Make sure the device and Bluetooth Music Receiver are within range.

• Make sure the Bluetooth function is turned on on your device.

• Make sure you are playing music from your device.

• Turn up the volume on your Bluetooth device.

• Make sure your Bluetooth device is not muted.

Cannot pair with a Bluetooth device

• Make sure that your phone or device is Bluetooth-compatible.

• Try re-pairing the Bluetooth Music Receiver. See “Pairing your devices using Bluetooth”.

• Your Bluetooth Music Reciver may already be connected to a different Bluetooth device. You need to disconnect the Bluetooth Music Receiver from that device and then reconnect to your other device.

Bluetooth signal fades or drops out

• Move your Bluetooth Music Receiver closer to the device.

Legal notices

FCC caution:

Changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

FCC statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

RSS-Gen & RSS-210 statement:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

RSS-102 statement:

This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé

One-year limited warranty

Visit www.rocketfishproducts.com for details.

Contact Rocketfish:

For customer service, please call 1-800-620-2790.

www.rocketfishproducts.com

Distributed by Best Buy Purchasing, LLC

7601 Penn Avenue South, Richfield, MN 55423-3645 USA

© 2012 BBY Solutions, Inc., All Rights Reserved. ROCKETFISH is a trademark of BBY Solutions, Inc.

All other products and brand names are trademarks of their respective owners.

ENGLISH 12-0452

advertisement

Related manuals

advertisement