Bay Tek Flappy Bird Service Manual

1

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +561.391.7200

TABLE OF CONTENTS

FACTORY CONTACT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

WELCOME TO: Flappy Bird . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

HOW TO PLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

QUICK SET UP GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

MAIN MENU FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

GAME SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

REDEMPTION GAME PAYOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13

MERCHANDISER PAYOUT MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

ENTERTAINMENT ONLY PAYOUT MENU . . . . . . . . . . . . . . . . . . . . . 14

DATE/TIME MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

STATISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

DIAGNOSTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-19

TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-25

ON-SCREEN ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

HOW TO: REMOVE PLAYER BUTTON . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HOW TO: REPLACE POWER STRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

POWER SUPPLY DIAGNOSTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

BILL ACCEPTOR DIAGNOSTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

CARD SWIPE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

2300 BOARD PINOUT GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

PARTS IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-34

DECAL PLACEMENT DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

MAINTENANCE LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

TECHNICAL SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3


WELCOME TO: FLAPPY BIRD

Congratulations on your purchase!

Join the app game craze with the ultra-popular Flappy Bird! Quick, simple and completely addictive, Flappy Bird will have your customers lining up for high score!

Please take a moment to read through this manual and be sure to contact our factory if you have any questions, or would like some more information.

Thank you for your purchase! Your business is important to us and we hope you enjoy this game as much as we do!

Your Friends at Bay Tek Games

GAME INSPECTION

Inspect the game for any damaged, loose, or missing parts.

If damage is found, please contact your freight carrier first.

Then, contact Bay Tek Games’ Service Department at 920.822.3951 or e-mail them at [email protected] for further assistance.

4


HOW TO PLAY

Tap the button to make the bird fly.

Get tickets for every set of pipes you pass through.

Don’t crash into the pipes or your game is over!

Play again and try to get the high score!

5


GAME SPECIFICATIONS

WEIGHT

NET WEIGHT 300 LBS

SHIP WEIGHT 370 LBS

DIMENSIONS

WIDTH 37”

DEPTH 45”

HEIGHT 91”

OPERATING TEMPERATURE

FAHRENHEIT 80-100

CELSIUS 26.7-37.8

POWER REQUIREMENTS

INPUT VOLTAGE

RANGE

INPUT FREQUENCY

RANGE

100 to 120

VAC

50 HZ

/

/

220 to 240

VAC

60 HZ

MAX START UP

CURRENT

OPERATING

CURRENT

1.5 AMPS @ 115 VAC 0.75 AMPS @ 115 VAC

1.8 AMPS @ 230 VAC 0.9 AMPS @ 230 VAC

SAFETY PRECAUTIONS

!

!

NOTICE

Modifications to the mechanical, electrical and structural components of this game may void its compliance certifications.

DANGER

DO NOT perform repairs or maintenance on this game with the power ON.

Unplug the unit from the wall outlet or shut off the power strip located inside the cabinet.

!

!

!

WARNING

!

Use of flammable subtances can cause sever burns or serious injury.

Always use NON-FLAMMABLE solvents for cleaning. DO NOT use gasoline kerosene or thinners.

!

CAUTION

!

Lifting heavy objects can cause back, neck or other injuries. Be sure adequate lifting and moving devices are available when unloading, unpacking and moving this game.

!

ATTENTION

!

Be sure the electrical power matches the game requirements. See the serial number located on the back of the game cabinet. Always plug into a grounded circuit. If the supply cord is damaged, it must be replaced by an approved cord or assembly provided by the manufacturer.

!

!

IN CASE OF EMERGENCY

UNPLUG THE POWER CORD.

The power cord must be accessible at all times in case of an emergency.

6


QUICK SET UP

Place the game near desired location.

Plug in the marquee light power cable to the housing at the top of the back of the cabinet.

Prop the marquee up and secure in place with 5 bolts from the hardware kit in the cashbox.

Plug the power cord (inside the cashbox) into a standard 110V outlet, then switch the power strip inside the cabinet to ON.

7


MAIN MENU FUNCTIONS

Press the MENU button inside the front door of the cabinet to open the main menu.

Scroll through the selections with the MENU button, and adjust settings with the SELECT button.

Game Volume

Attract Volume

Clear Credits & Tickets

Game Mode

MAIN MENU OPTIONS

0 (off) to 100 (max)

0 (off) to 100 (max) press select 3 times to clear credits and tickets owed

Redemption

(tickets)

Entertainment

Only

Merchandiser

(prize vendor)

Entertainment

Only

8


SETTINGS MENU

SETTINGS MENU OPTIONS

Number of Lives

(entertainment & merchandiser only)

Holiday Theme Hats

(US holidays)

1 2

Pipe 1-15

(pipe passed to get hat)

Difficulty Level

(controlled by the size of the vertical gap between pipes. The starting gap size and the number of pipes over which the gap narrows both factor in to these settings)

1

(easy)

2 3 4

Gap Narrowing Pipe

(the point at which difficulty increases)

START

1 2 3

5

4

3

Disabled

6

5

7

6

4

8

(hard)

7

Auto Adjust*

(automatically adjusts the difficulty based on trends of player success)

8 9 10

* Washington State law requires the game to be set to not include the Auto Adjust difficulty level.

9


PAYOUT MENU (REDEMPTION)

10


PAYOUT MENU (REDEMPTION)

Factory defaults are highlighted in yellow below.

CREDITS PER PLAY

CARD SWIPE

PAYOUT MENU OPTIONS

0 1 2 3 4 5 6 7 8 9 10

ENABLED DISABLED

TICKET PIPE SPACING 1 2 3 4 5 6 7 8 9 10

TICKET VALUE

DIVIDE BY 2 TICKETS

1 2 3 4 5 6 7 8 9 10

ENABLED DISABLED

MERCY TICKETS 0 1 2 3 4 5

MERCY TICKET VALUE

(TICKET IMAGE)

BONUS 1

PIPE POSITION

1 2

0 (OFF)

BONUS 1 TICKET VALUE 5 TICKETS

BONUS 2

PIPE POSITION

0 (OFF)


3 4

TO

TO

TO

TO

5 6 7

25 PIPES

50 PIPES

8

25 TICKETS

50 TICKETS

9 10

DEFAULT: 10

DEFAULT: 10

DEFAULT: 20

DEFAULT: 20

BONUS 3

PIPE POSITION

BONUS 3 VALUE

0 (OFF)

25 TICKETS

TO

TO

100 PIPES

250 TICKETS

DEFAULT: 35

DEFAULT: 50

BONUS 4

PIPE POSITION

0 (OFF)


BONUS 5

PIPE POSITION

0 (OFF)


TO

TO

TO

TO

150 PIPES

1000 TICKETS

200 PIPES

2500 TICKETS

DEFAULT: 50

DEFAULT: 500

DEFAULT: 60

DEFAULT: 1000

TICKET CAP 0 (OFF) TO 2500

For “NO BONUS” play, turn all bonus pipe positions to 0 (OFF)

11


TICKET PAYOUT OPTIONS CHART

Find your desired average tickets per game, then select a column based on your desired bonus value.

3-4

AVERAGE TICKETS PER GAME

PIPE BONUS

PIPE #10

PIPE #20

PIPE #35

PIPE #50

PIPE #60

TICKET VALUE

PIPE SPACING

NO BONUS- NO MERCY

0

0

0

0

0

1

3

6-9


PIPE BONUS

PIPE #10

PIPE #20

PIPE #35

PIPE #50

PIPE #60

TICKET VALUE

PIPE SPACING

NO BONUS

0

0

0

0

0

1

2

10-13


PIPE BONUS NO BONUS

PIPE #10

PIPE #20

PIPE #35

PIPE #50

PIPE #60

TICKET VALUE

PIPE SPACING

0

0

0

0

0

2

3

14-20



PIPE #10

PIPE #20

PIPE #35

PIPE #50

PIPE #60

TICKET VALUE

PIPE SPACING

1

1

0

0

0

0

0

NO BONUS- 1 MERCY

0

0

0

0

0

1

4

MED BONUS

0

10

20

100

0

1

4

MED BONUS

0

10

20

100

0

1

2

MED BONUS

5

10

25

100

500

1

2

HIGH BONUS- NO MERCY

0

0

25

100

0

1

5

HIGH BONUS

5

10

50

100

500

1

5

HIGH BONUS

5

10

25

100

500

1

4

HIGH BONUS

5

10

25

500

1000

1

2

12


TICKET PAYOUT OPTIONS CHART

24-28


PIPE BONUS

PIPE #10

PIPE #20

PIPE #35

PIPE #50

PIPE #60

TICKET VALUE

PIPE SPACING

NO BONUS

0

0

0

0

0

4

2

MED BONUS

5

10

25

100

500

1

1

30-36

(RECOMMENDED DEFAULT) AVERAGE TICKETS PER GAME

PIPE BONUS NO BONUS MED BONUS

PIPE #10

PIPE #20

PIPE #35

PIPE #50

PIPE #60

TICKET VALUE

PIPE SPACING

2

1

0

0

0

0

0

5

10

25

100

500

3

2

48-54



PIPE #10

PIPE #20

PIPE #35

PIPE #50

PIPE #60

TICKET VALUE

PIPE SPACING

0

0

0

0

0

3

1

60-66



PIPE #10

PIPE #20

PIPE #35

PIPE #50

PIPE #60

TICKET VALUE

PIPE SPACING

4

1

0

0

0

0

0

MED BONUS

5

10

25

100

500

6

2

MED BONUS

5

10

25

100

500

4

1

13

HIGH BONUS

5

10

25

500

1000

1

1

HIGH BONUS (DEFAULT)

10

20

50

500

1000

1

1

HIGH BONUS

10

20

50

500

1000

2

1

HIGH BONUS

10

20

50

500

1000

3

1


PAYOUT MENU (MERCHANDISER)

MERCHANDISE VENDING UNIT COMING SOON!

PAYOUT MENU (ENTERTAINMENT)

Entertainment Only option (in Main Menu) must be enabled to select a free game score. A message will be displayed during gameplay to inform the player of how close they are to recieving a free game, as well as when the free game is awarded. Only one free game is allowed per credit inserted.

14


DATE & TIME MENU

15


STATISTICS MENU

DIAGNOSTICS MENU

16


BUTTONS, COUNTERS, COINS, TICKET DISP. WIRING

AACE2301

AACBL4A-DOOR

Inhibit

To Bill Acceptor (Part # A5AC9091)

Optional – Not included with game.

A5PL4200 (Mounting Plate) needed to install DBA.

AACE2316

AACE2316

To Game Ground

To Coin connector on 2300 Board

AAMB2300

To DBA connector on 2300 Board

To Inputs connector on 2300 Board

AACE2328

To Count/Menu connector on

2300 Board

AACE2307

Individual switch is part # A5SW6600

If one switch is broken, unplug it.

The game will work using the other switches.

AACE2312

Bird Flap Button

(Part # A5PB6600)

To Tix connector on 2300 Board

AACO1000

Ticket

Counter

Game

Counter

AAPB2700

Menu Select

Button

AACE2302

It is important that the wire colors are installed in this specific position, because the diagnostic menu in the game program is related to this wiring scheme.

Ticket Tray Cable

AACE3219

To Ticket Dispenser

Part # A5TD1

12 Volt Power

Enable Signal

Com Ground

Notch Signal

Game

Ground

Low Ticket Switch

Wired Normally Open

AASW200

1/4” Spacer A5SENY020

AAPB2700

Menu Scroll

Button

17


COMMUNICATION, SPEAKER & LED LIGHTING WIRING

Monitor Surround LED’s Left Side

Console LED’s

Right Side

Console LED’s

AACE2303

Speaker

AACE8811

To Speaker connector on 2300

Board

AAMB2300

To Outputs connector on 2300

Board

A5CEAU010

Audio Cable from green socket on Motherboard to 2300 Board

AACE2330

AACE2309

Communication cable from Comm on 2300 board to J1 on Interface Board.

AAMB8-HD

AACB2204

A5CORD36

HDMI Cable to

Monitor

AACE2310

Communication cable from J2 on

Interface Board to Motherboard

A5CN1031

Adaptor to plug cable into Motherboard

18

AACE2330


POWER IN / 12 VOLT WIRING

LED Lighting in Marquee

Left Side

LED’s

Right Side

LED’s

+ - + - + -

AACE2319 AACE2319

AACE2327

Flexible Strip

AACE2314

AACE2318

Jumper to

Marquee

+ - + - + - + -

AACE2332 AACE2332 AACE2332 AACE2332

SATA Hard

Drive

A5HD1800

3 1

AACE2326

2 4

3 1

AACE2326

2 4

AAMB8-HD

3 1

AACE2313

2 4

Power Supply

AAPS1008-FB

AAMO4204

Monitor 42”

AC Power to Monitor

A5CORD5

AC Power to

Bill Acceptor

AACE2316

Outlet Strip

AACE2329

AC Power to

Power Supply

A5CORD5

Line Filter

A5FI9010

To Power connector on 2300 board

Outlet Strip

AACE2329

Power In Cord

From Wall

A5CORD5

AAMB2300

19


TROUBLESHOOTING GUIDE

Troubleshooting Strategy

Use common sense and a systematic method of troubleshooting to determine the exact problem, probable cause and

Troubleshooting Chart

Problem Probable Cause Remedy

No power to the game.

No lights on at all.

Bill Acceptor powers on.

But everything else off.

(Power Supply not ON)

Dollar Bill Acceptor not functioning.

Ensure Bill Acceptor is set to

“Always Enable”

Game not coining up.

Unplugged.

Circuit breaker tripped.

Power strip faulty.

Faulty cable/power supply.

Power supply unplugged.

Rocker Switch and voltage switch.

Power supply shutting down because of 12 V overload.

Faulty power supply.

Check for power to Bill

Acceptor.

Dirt or debris in acceptor slot.

Pinched, broken, or disconnected wiring.

Bill acceptor problem.

Check wall outlet.

Reset power strip breaker switch or building circuit breaker.

Change plug position, replace if needed.

See Power Supply diagnostic section

Insure unit is plugged

into power strip.

Make sure rocker switch is set ON. (-) and switch at 100V or 230V

See power supply diagnostics to isolate bad component. A bad motor or 12 volt short would cause this.

See Power Supply Diagnostic section

Acceptor should cycle stacker at game power up. If not, check cable connections.

Refer to “How to Clean Bill Acceptor”

Or clean with bill reader cleaning card.

(A5CC9000)

Check wiring from bill acceptor

to 2300 Board. (AACE2316)

Repair or replace wiring harness.

Check DBA connector on 2300 Board

Make sure wires are secure in connectors.

Refer to troubleshooting section of dollar bill acceptor manual included with this game or the diagnostics label of the back of the unit.

Ensure game makes

“whoosh” sound when coin switch is triggered.

Verify communication between motherboard and

2300 board.

Check coin switches—both should be wired normally open. If one switch is “closed” the other will not work either. Check wiring to

2300 board. (AACBL4A-DOOR, AACE2301)

Refer to “Comm Error” troubleshooting section.

Game set to large amount of credits per game.

Check Pay In/Out Menu. Ensure Credits per

Game is set. Default = 4

20



Problem

Cabinet Lighting does not work.

There are 2 different types of cabinet lighting

Probable Cause

12 Volt White LED’s

Faulty cable.

Disconnected, loose or broken wires.

Individual LED strip out

Colored LED’s

12 Volt White LED’s

&

Colored LED’s that change color

Faulty cable.



Enter Diagnostic menu and select “Change

Monitor Lights”

Colored LED’s not functioning properly

Enter Diagnostic menu and select “Change

Monitor Lights”

Remedy

These LED’s receive power directly from power supply

Refer to “Power In & 12 Volt Wiring Diagram”

Identify LED strip, check soldered wires, replace if needed.

These LED’s receive power from 2300 Board

Refer to “Communication, Speaker & LED Wiring

Diagram”

Entire section of LED’s do not work

Specific Colors do not light on all LED strips


Check main jumper cable (AACE2330)

Look for broken wire

2300 Board may be faulty. Check connection

“Outputs” on main 2300 board. Replace if needed.

These LED’s receive power from 2300 Board

Refer to “Communication, Speaker & LED Wiring

Diagram”

Faulty cable.



Entire section of LED’s do not work

Specific Colors do not light on all LED strips


Check main jumper cable (AACE2330)

Look for broken wire

2300 Board may be faulty. Check connection

“Outputs” on main 2300 board. Replace if needed.

No Sound

Motherboard creates sound, 2300 board amplifies it.

AAMB8-HD

Volume set to zero in menu.


AAMB2300

A5CEAU010

Audio Jack from Motherboard to 2300 Board

Faulty speaker.

Determine if

2300 board is ok

Enter Main Menu and verify:

Game Volume & Attract Volume are not zero

Check connections and reseat audio cable from motherboard to 2300 board.

Cables # AACE8811, AACE2303, and

A5CEAU010.

Unplug audio jack cable (A5CEAU010) from motherboard, plug into MP3 player and see if music is amplified and comes out of speaker.

If Yes - then motherboard is faulty.

If No - then 2300 board may be faulty.

Replace speaker. AACE8811

21



Problem Probable Cause Remedy

Opto Sensor on ticket dispenser dirty.

Tickets do not dispense or Wrong amount dispensed.

Tickets on monitor does

not match tickets coming out of game.

Faulty ticket dispenser.

Notch on tickets cut too shallow.

Faulty cable. Disconnected, loose or broken wires.

Blow dust from sensor and clean with isopropyl alcohol.

Replace with working dispenser to isolate the problem. (A5TD1)

Flip tickets and load upside-down to have large cut notch toward opto sensor.

Check connectors from ticket dispensers to

2300 board. Check for continuity.

Cables AACE3219, AACE2302

Check for the correct amount of tickets showing on

Monitor

Tickets on monitor does match tickets coming out of game.

Faulty 2300 Board.

Settings in Menu are incorrect.

Replace 2300 board. (AAMB2300)

Enter Menu and check certain areas:

Verify “Game Mode” is Redemption

Check Divide By 2 option

Check Mercy Tickets

Verify Pipe Values are correct.

Low Tickets message on monitor

Tickets are empty in ticket tray

Faulty cable. Disconnected, loose or broken wires.

Faulty low ticket switch.

Faulty MiniGen Board

Load tickets into tray. Ensure tickets hold down micro switch wire. Switch is part # AASW200

Check connectors from low ticket switches to 2300 board.

Check for continuity. (AACE3219, AACE2302)

Inspect switch and replace if needed. (AASW200)

Replace 2300 Board. (AAMB2300)

AACB2204

No Communication between boards.

Game does not coin up

Check green LED’s on Serial Interface board.

“Power” solid ON

“TX” & “RX” blinking very fast,

Game has audio track

"clinking” sound from speakers when coin switch triggered.

If “Power” is not solid ON If “TX” & “RX” are not blinking very fast

Communication to Motherboard faulty.

Ensure AACE1309 cable is

plugged into 2300 board. (Comm) Check AACE2310 to motherboard.

Check or replace adaptor (A5CN1031)

AACB2204

AAMB8-HD

AAMB2300

AACE2310

If “TX” is solid ON

Motherboard is faulty. Replace

AAMB8-HD

A5CN1031

AACE2309

Replace Serial Interface board. (AACB2204)

If “RX” is solid ON

2300 Board is faulty. Replace AAMB2300

22



Problem

Game Meter does not work.

Game meter will click at end of game.

Probable Cause

Verify meter does not click at

end of game

Remedy

This is done because Flappy Bird will not start a game until button is pressed.


Check connections and reseat Count/Menu on

2300 board. Cables # AACE2307 and AACO1000

Faulty counters. Replace counters. AACO1000

Ticket Meter does not work.

Ticket meter will click as tickets come out of game and notch is “seen” by dispenser.

Ensure correct number of tickets are being dispensed.

Check ticket values, refer to Tickets not

Dispensing troubleshooting section.


Faulty counters.

Check connections and reseat Count/Menu on

2300 board. Cables # AACE2307 and AACO1000

Replace counters. AACO1000

Menu Buttons do not work.


Faulty button.

Faulty communication between motherboard and Minigen

Faulty AAMB2300 board.

Check connections from button to 2300 board.

Cables # AAPB2700 and AACE2307

Test button and replace. (AAPB2700)

Refer to “No Communication between boards” troubleshooting section.

Replace AAMB2300 board.

Flap Button does not work.

Enter diagnostic menu and check for stuck buttons.


Faulty or stuck button.

Faulty AAMB2300 board.

If a button shows “stuck” select “Reset Input Status” to clear it and it will go back to “Up”

Check connections from pushbutton to 2300 board.

Cables # AAPB2700 and AACE1301

Refer to “Screen Error Messages” troubleshooting

Section to diagnose stuck switch on flap button.

Replace AAMB2300 board.

Monitor shows “No

Signal” then black.

Faulty power supply - Check for 12

Volts and blinking green LED on

SATA Drive

Re-Boot game to see if problem still exists.

Power game down, wait 10 seconds, then power game ON to reset.

Motherboard/power supply is not working.

Monitor HDMI cable unplugged.

Fan turning.

Large power connector unplugged on motherboard.

Faulty or loose RAM

AAMB8-HD

Refer to Monitor/Motherboard Power Supply

Diagnostics for further diagnostic information.

23



Problem

Monitor not working.

Monitor says

“NO SIGNAL” for 5 seconds after power up.

Then dark.

Probable Cause Remedy

Faulty power supply - Check for 12 Volts and blinking green LED on SATA Drive

Monitor HDMI cable unplugged.

AAMB8-HD

Fan turning.

Large power connector unplugged on motherboard.

Faulty or loose RAM

Refer to Monitor/Motherboard Power Supply Diagnostics for further

diagnostic information.

Power down, wait

10 seconds and power up again.

Monitor has nothing at all on power up.

Error on screen at power up.



Power cable unplugged from monitor.

Faulty monitor.

Monitor shows ASROCK

SETUP UTILITY”

Display shows “Sleep

Mode” on screen.

Display shows “Kernel panic – unable to mount root” on screen.

Display shows anything other than Dizzy

Chicken software on

Screen.

Ensure power is plugged into back of monitor, down to power strip.

Open rear access door.

Push ON button on monitor’s satellite board.

Replace monitor. (AAMO2200)

SATA Drive unplugged from board or faulty

Refer to “Monitor shows ASROCK SETUP

UTILITY” section.

Power Supply or Motherboard not

Communicating correctly with monitor.

Refer to “Monitor shows Sleep Mode on screen” section.

Faulty or loose RAM Refer to “Monitor shows

Kernel panic – unable to mount root” section.

Motherboard is not loading or running program.

Refer to “Monitor shows anything other than Dizzy Chicken software on screen” section.

Monitor shows nothing at all on power on.

Open rear access door.

Push ON button on monitor’s satellite board.

Power cable unplugged from monitor.

Power strip faulty

Faulty power cable for monitor

Re-Boot game and check for any errors on monitor. Power game down, wait 10 seconds, then power game ON to reset.

Faulty monitor.

Ensure power is plugged into bottom of monitor, down to power strip.

Change plug position, replace if needed

(AACE2329)

Check A5CORD5 to ensure 110 volts to

Monitor.

If error shows on monitor, refer to suggestions above.

Replace monitor. (AAMO4204)

24



Problem

Monitor shows

“ASROCK

SETUP

UTILITY”

Monitor shows “Sleep Mode” on screen.



Monitor shows “Kernel panicunable to mount root” on screen.

Probable Cause

Power Supply or

Motherboard not communicating correctly with monitor.

Faulty or loose RAM

Remedy

Small clip-in hard drive is not being seen by computer.

Push on spring clip and gently remove from motherboard. Re-install and power on game.

Try in different SATA slot on motherboard.

Replace hard drive. (A5HD1800)

Replace motherboard. (AAMB8-HD)

Check power supply voltage.

Replace power supply. (AAPS1008-FB)

Ensure power supply connection is secure to motherboard.

Refer to Monitor/Motherboard Power Supply

Diagnostics


Separate metal tabs on sides of RAM, it will flip up to remove.

Re-install and Re-Boot game to see if problem still exists.



Monitor shows anything else other than Flappy Bird program on screen.



Motherboard has trouble loading or running program

Monitor problems

Large power connector unplugged on

Motherboard

Faulty or loose RAM

Faulty motherboard - Replace faulty board.

(AAMB8-HD)

Press the auto button to select Auto Adjustment.

This may take a few seconds.

Blurry Monitor

Too bright, or dim.

Verify that the screen looks good and

Image is centered.

25


ON-SCREEN ERROR MESSAGES

The push button to flap the bird consists of

4 individual switches that work together.

If a single switch breaks, the game software will ignore it and the game will continue working. Up to 3 switches can fail and the game will still function properly.

(you may notice that you must push button harder to flap the bird)

If all 4 switches fail, then this error will show on display.

Button Housing (Flipped Horizontally)

Reversed from install position

Game Error See Attendant means the game is reading all 4 flap bird buttons as closed inputs.

Remove flap button from machine. (Refer

to “How to Remove Flap Button”

Flip button housing upside and refer to diagram to check/replace individual switches

(A5SW6600) or replace the entire assembly (A5PB6600)

After fixing switch, enter diagnostic menu and button will show “stuck” .

Select “Reset Input Status” to clear it and it will go back to “Up”


The 2300 board must communicate to the motherboard for the game to operate correctly.

Com Error See Attendant

means the game knows that these boards are not communicating.

AACB2204

AAMB8-HD

AAMB2300

AACE2310

AACE2309

A5CN1031

AACB2204

Check green LED’s on Serial Interface board.

“Power” solid ON

“TX” & “RX” blinking very fast

If “Power” is not solid ON

Power is supplied by 2300 board.

Ensure AACE1309 cable is plugged into 2300 board.

(Comm)

If “TX” & “RX” are not blinking very fast

No communication from 2300 to Motherboard.

Check AACE2310 to motherboard.

Check or replace adaptor (A5CN1031)

Replace Serial Interface board. (AACB2204)

Possible faulty port on motherboard or 2300 board.

If “TX” is solid ON

Motherboard is faulty. Replace AAMB8-HD

If “RX” is solid ON

2300 Board is faulty. Replace AAMB2300

26


HOW TO: REMOVE PLAYER BUTTON

Remove power to game.

Remove 4 screws on back side of button tower. (#2 square)

Remove single nut from top side of button assembly using 7/16” socket wrench

Open front door and remove large clear plastic spill guard.

Remove 2 nuts from bottom side of button assembly using

7/16” nut driver

Check/replace individual switches (A5SW6600)

Or replace the entire assembly (A5PB6600)


Carefully remove button from machine as wiring harness will come out with button.

HOW TO: REPLACE OUTLET STRIP / LINE FILTER

The outlet strip and line filter connections are enclosed in wood for your protection.

If these items need to be replace, follow these instructions.

Remove power from game.

Remove 6 screws on back side of rear monitor tower. (#2 square)

Remove 4 black screws in wood plate. (#2 square)

Remove 2 silver screws that hold in line filter. (phillips)

27


MONITOR / MOTHERBOARD POWER SUPPLY DIAGNOSTICS

1.) Verify AC power to game. Check power strip in front door.

The rocker switch should be illuminated.

3.) Check connection to power supply.

4.) Ensure Power Supply switch is set to 115V (or 230V)

(Some model power supplies may not have this)

5.) Ensure Power switch is on.

6.) Ensure fan is turning.

- If power supply fan is turning and there is no 12 Volt out, then replace power supply. (AAPS1008-FB)

- If power supply fan is not turning, then continue to “Verify Power to Motherboard”

Verify Power to Motherboard

The motherboard will turn on power supply.

If your game has no 12 volts, it may be the motherboard not turning on.

In addition - there may be a 12 volt short somewhere else in cabinet that is not allowing the power supply to turn on.

Minimize load on power supply and isolate short

Unplug all outputs from power supply except for motherboard.

This will have power supply, motherboard, and monitor left plugged in.

If power supply, motherboard, and monitor now turn on:

Plug in one component at a time to power supply to locate short.

If power supply still does not power on, then continue to steps 1,2, and 3.

1

- Check single connection from power supply.

2

- Verify these pins are covered by connector with a single

capacitor.

If the connector is missing, continue to step 3 to jump the pins under this connector.

AAMB8-HD

3

- Motherboard “Jump Start”

As a last resort, you may start motherboard by quickly touching these 2 pins at the same time, then quickly release

Motherboard may turn ON and boot normally.

If power supply still does not power on, replace power supply (AAPS1008-FB) or motherboard. (AAMB8-HD)

28


BILL ACCEPTOR DIAGNOSTICS

The Flappy Bird Game is Bill Acceptor ready. We recommend MEI AE-2451-U5E (Part # A5AC9091)

If you would like to add one to the game, please make sure the mounting plate is present. (A5PL4200)

Note: There are many different models and brands of Bill Acceptors that are used on redemption games. Your Bill Acceptor may differ from the unit shown.

Determine if Bill Acceptor has power:

Turn game ON—The bill acceptor should make noise as stacker cycles and green lights on outside bezel should flash.

If NO power:

Use meter to measure 110 AC voltage at cable going into Bill Acceptor from power strip.

If power is OK:

Clean Bill Acceptor path to make sure there is nothing jamming unit.

Check dipswitch settings on side of acceptor.

Make sure switch # 8 is OFF for Always Enable

ERROR CODES

Count the number of flashes on front bezel of Bill Acceptor and follow chart for repair.

29


CARD SWIPE SYSTEM INSTALLATION

The Flappy Bird game is pre-wired to accept Card Swipe systems from many manufactures.

Please follow these instructions to make full use of Flappy Bird capabilities.

Option #1:

New card swipe systems may come with a standard 9 pin Molex connector.

Simply unplug this connector and plug into your card swipe reader.

AACBL4A-DOOR

AACE2301

AACBL4A-DOOR

Option #2:

If your card swipe systems does not have a standard 9 pin Molex connector, then you will have to splice wires into the AACE2301 harness.

AACE2301

+12 Volts DC

Red or Orange Wire

Com (Ground)

Black or green wire

Coin Signal

White Wire

Menu Changes

Enter menu, go to “Pay In/Out” Menu

Change “Credits” to 1

Change “Card Reader” to Enabled

Additional:

Baytek sells an optional sticker sheet that will cover up the “Insert Coin” on many different types of games.

Part # A5DE0047

Example: Stick on Big Bass Wheel to cover “Insert Coin” artwork.

30


2300 BOARD CONNECTOR PINOUT GUIDE

AACE2301

31


PARTS LIST

PART # DESCRIPTION

A5CB8020 Cash Box

A5FI9010

A5PB6600

A5SW6600

AASW200

W5TM1316

Inline Filter

Big Red Push Button

Single Switch For Button (4 Per)

Low Ticket Switch

13/16" Black/Silver T-Molding

Trim Around Marquee & Monitor Vacuum

Form (Per Ft)

Monitor Connector Adapter

A5TR2300

A5CN1031

A5LK2001

A5LK5002

Cash Box Lock (A05 Key)

Cabinet Lock (C15 Keys)

A5HO1003 Holder For Light Bar

AACO1000 Counter

AAPB2700

A5BK1013

A5ME2311

A5ME2312

A5ME4179

A5ME4182

A5PL4200

A5PL8900

A5TT4100

Red Push Button, Menu Select

Push Button/Counter Bracket

Metal Tough Screen Stand

Metal Side Rails

Ticket Tray Bracket

Metal Coin Box Guide

Bill Acceptor Plate

Blanking Plate For Bill Validator

Ticket Tray

A5TD1 Ticket Dipenser

AAPS1008-FP Power Supply

AAMO4204

A5DE0042

42" Monitor With Wood

New Menu/Volume Pot Decal

A5DE2300 Top Cabinet Decal

A5DE2301 Left Side Vent Decal

A5DE2302

A5DE2303

A5DE2304

Right Side Vent Decal

Front Top Decal (With Bay Tek Logo)

Front Middle Decal, Bottom Cabinet

A5DE2305

A5DE2306

A5DE2310

A5DE2311

A5DE2312

A5DE2313

AAVF2300

Front Bottom Decal, Bottom Cabinet

Coin Door Decal, Bottom Cabinet

Flappy Bird Marquee Decal

Console Decal (Around The Button)

Left Side Bottom Decal, Bottom Cabinet

Right Side Bottom Decal, Bottom Cabinet

Vacuum Form With Vent Decals (Around

Monitor)

PART # DESCRIPTION

AACE2320

AACE2321

AACE2322

AACE2323

AACE2325

AACE2326

AACE2327

AACE2328

AACE2329

AACE2330

AACE2331

AACE2332

AACE3219

AACE8811

A5HD1800

AACB2204

AAMB2300

AAMB8-HD

A5CORD5

A5CORD36

AACE2309

AACE2310

AACE2312

AC Computer Cord

HDMI Cable To Monitor

A5CEAU010 Audio Stereo Cable

AACBL4A-

DOOR Door Cable

AACE1715

AACE2300

Ground Cable

Monitor Lights Jumper

AACE2301

AACE2302

AACE2303

AACE2305

AACE2307

Coin Door Cable

Ticket Tray/Low Ticket Cable

Speaker Cable

Left & Right Side Lights Jumper

Menu Buttons Cable

MicroGen Communication Cable To

Interface

MB8 Communication Cable To Interface

Play Button Cable

AACE2313

AACE2314

AACE2316

AACE2318

AACE2319

Flappy Marquee Jumper

Marquee Lights Jumper

DBA Cable

12 Volt Jumper Cable to Marquee

LED White Light Strips (2 Per)

LED's Around Monitor (2 Per)

Ground to Filter Cable

Monitor Stand Ground Cable

Light Panel Control Cable

Jumper To Monitor Around LED's (2 Per)

Jumper to Side LED's (2 Per)

Marquee Lights Cable

Main Bd Push Button Cable

Power Strip Assembly

Jumper to LED Outputs

Side Tower Strip Lights (4 per)

Side Tower White Stick Lights (4 Per)

Ticket Dispenser/Low Ticket Switch Cable

Speaker Assembly

SATA Drive

Communication Board

Micro Gen Board

Motherboard With Hard Drive

32


PARTS IDENTIFICATION

W5TM1316 AASW200 AAPS1008-FB A5FI9010 AAPB2700

A5HO1003 A5CB8020 A5TT4101 A5ME4179

A5DE2300 A5DE2303 A5DE2304 A5DE2305

A5DE2306 A5DE2310 A5DE2311 A5DE2312 A5DE2313

AAMB8-HD

AACB2204 A5CN1031 AAMB2300 A5TD1 AAMB8-HD

33


PARTS IDENTIFICATION

AACE2300 AACE2301 AACE2302 AACE2303 AACE2305





AACE3219 AACE8811 AACO1000 A5CORD5 A5CEAU010

34


DECAL PLACEMENT GUIDE

Flappy Bird Marquee

A5DE2310

Vent Right

A5DE2302

Vent Left

A5DE2301

Cabinet Top

A5DE2300

FB Left Side

A5DE2312

Flappy Bird Console

A5DE2311

Front Top

A5DE2303

Front Middle

A5DE2304

FB Right Side

A5DE2313

Front Bottom

A5DE2305

Coin Door

A5DE2306

35


MAINTENANCE LOG

If repairs are necessary, it is good practice to keep a log of repairs done and parts ordered.

The chart below will assist you in tracking your game’s maintenance.

DATE MAINTENANCE PERFORMED PARTS ORDERED INITIALS

36


TECHNICAL SUPPORT

Excellent customer service is very important to Bay Tek Games!

We know that keeping your games in great operating condition is important to your business.

When you need us, we are here to help. You can call us for free technical assistance, and you can count on us to have parts on-hand to support your game. We offer options that fit your needs.

Electronics / Circuit Boards - Repair Options

Repair & Return –

If you have Circuit Board issues with your Bay Tek game, you can send the board to us and we’ll repair it right away. Most items sent to us are repaired and returned to you within two days. This option is your best value as we offer this fast turn-around service at the most reasonable price.

Advance Replacement –

If you have Circuit Board issues with your Bay Tek game, but you don’t have time to send in your board in for repair, give us a call and ask for an Advance Replacement.

We’ll send you a replacement board that same day (pending availability). When you get your new board, just repackage the defective board in the same box and send it back to us. We make it easy by including a UPS Return Shipping label for you to put on the box (not available for international shipments). This is your best option when you need to get your game up and running as quickly as possible!

Spare Parts –

Take matters into your own hands and purchase new spare Circuit Boards for your

Bay Tek games. Many of our games share the same main-board electronics. This means you can buy one set of spare electronics to support many of your Bay Tek games. Spare boards allow you to get your game up and running the quickest and provide you a valuable troubleshooting option. Call our technicians to get recommendations for what you should keep on hand for spare parts!

Technical Support:

“You” are the best tool for troubleshooting! Your abilities to understand the game and your skills to repair the game are invaluable to us! If you need help, you know you can call us. It’s not easy to diagnose a game remotely by phone, but our technicians do a great job. They’ll need your help to perform some troubleshooting steps and convey to them exactly what’s happening with your game.

Returns, Credits, & Fees:

NOTICE! ALL ITEMS being sent to Bay Tek Games for repair or return, etc. require prior Return

Authorization! Bay Tek Games will provide a Product Return Form with an authorizing Ticket Number for each item to be returned. Please be certain to include this document with all shipments!

Late Fees and Non-Return Fees - Advance Replacement and Warranty Replacement items require the defective items to be returned by Bay Tek games promptly to avoid Late Fees. We expect items to be returned within 10 working days. Late fees are invoiced monthly. Late fees are non-refundable under any circumstance! Any item not returned within 90 days will be invoiced in full as a replacement part.

Bench Fees -

Bench fees will apply for each electronic item returned to Bay Tek Games (this includes unused Advance Replacement items). This charge covers our cost to inspect, evaluate and retest each item. Please note that returned items that do not pass our tests will be charged accordingly as replacement items or advance replacements.

Restocking Fees -

Unused items returned for credit will be credited minus a restocking fee. Items must be returned within 30 days of purchase in order to qualify for any credit amount. No shipping charges will be credited.

37


WARRANTY

Bay Tek Games warrants to the original purchaser that all game components will be free of defects in workmanship and materials for a period of 6 months from the date of purchase. If you fill out the registration card in the cashbox of the game, Bay Tek will add another 3 months to your warranty, free of charge.

Bay Tek Games will, without charge, repair or replace defective component parts upon notification to the parts/service department while the game is under warranty.

Warranty replacement parts will be shipped immediately, via ground service, along with a Product

Return Form for the return of defective parts.

Defective parts must be shipped back to Bay Tek Games unless otherwise instructed. Items not returned to Bay Tek Games will be invoiced as replacement parts.

This warranty does not apply in the event of any misuse or abuse to the product, or as a result of any unauthorized repairs or alterations. The warranty does not apply if any serial number decal is altered, defaced, or removed from its original position.

!

ATTENTION

!

In order to maintain the safety & compliance certifications of this game, ONLY approved parts may be used. For approved replacement parts, refer to the parts list in this manual.

Should you need your game serviced, determine the serial number from the decal placed on the front of this manual, or locate it on the back of the game. Then contact our Service Department at:

920.822.3951 or e-mail: [email protected]

NON-WARRANTY

Options and estimated charges will be provided to you for your approval.

Please remember that any items being sent to Bay Tek Games must include prior return authorization from our Parts & Service Department.

This approval will include a Product Return Form which is required to be included with any incoming shipments. Repaired parts will be shipped back using the same method in which they were received.

Repairs are warranted for 30 days from the date of return shipment.

38

Bay Tek Flappy Bird Service Manual

Assistant Bot

TABLE OF CONTENTS

WELCOME TO: FLAPPY BIRD

Your Friends at Bay Tek Games

HOW TO PLAY

GAME SPECIFICATIONS

WEIGHT

DIMENSIONS

OPERATING TEMPERATURE

POWER REQUIREMENTS

MAX START UP

CURRENT

OPERATING

CURRENT

SAFETY PRECAUTIONS

NOTICE

DANGER

WARNING

CAUTION

ATTENTION

IN CASE OF EMERGENCY

QUICK SET UP

MAIN MENU FUNCTIONS

MAIN MENU OPTIONS

SETTINGS MENU

SETTINGS MENU OPTIONS

PAYOUT MENU (REDEMPTION)

PAYOUT MENU (REDEMPTION)

PAYOUT MENU OPTIONS

TICKET PAYOUT OPTIONS CHART

TICKET PAYOUT OPTIONS CHART

PAYOUT MENU (MERCHANDISER)

MERCHANDISE VENDING UNIT COMING SOON!

PAYOUT MENU (ENTERTAINMENT)

DATE & TIME MENU

STATISTICS MENU

DIAGNOSTICS MENU

BUTTONS, COUNTERS, COINS, TICKET DISP. WIRING

COMMUNICATION, SPEAKER & LED LIGHTING WIRING

POWER IN / 12 VOLT WIRING

TROUBLESHOOTING GUIDE

Troubleshooting Strategy

Troubleshooting Chart

TROUBLESHOOTING GUIDE

TROUBLESHOOTING GUIDE

TROUBLESHOOTING GUIDE

TROUBLESHOOTING GUIDE

TROUBLESHOOTING GUIDE

ON-SCREEN ERROR MESSAGES

HOW TO: REMOVE PLAYER BUTTON

HOW TO: REPLACE OUTLET STRIP / LINE FILTER

MONITOR / MOTHERBOARD POWER SUPPLY DIAGNOSTICS

Verify Power to Motherboard

Minimize load on power supply and isolate short

1

2

3

BILL ACCEPTOR DIAGNOSTICS

ERROR CODES

CARD SWIPE SYSTEM INSTALLATION

2300 BOARD CONNECTOR PINOUT GUIDE

PARTS LIST

PART # DESCRIPTION

PART # DESCRIPTION

PARTS IDENTIFICATION

PARTS IDENTIFICATION

DECAL PLACEMENT GUIDE

MAINTENANCE LOG

TECHNICAL SUPPORT

WARRANTY

ATTENTION

NON-WARRANTY

Key Features

Frequently Answers and Questions

How do I play Flappy Bird?

What are the power requirements for the Flappy Bird?

How do I adjust the difficulty level of the game?

What are the payout options for the Flappy Bird?

What happens if the Flap Button is not working?