- Harley
463
the dyno chart
An invaluable tool in performance modification, the dyno chart can visually compare the performance
characteristics of a stock engine with those of a modified engine — and can help you determine if a particular
set up will generate the power gains you’re after. The horizontal axis indicates engine speed in RPM and
the left and right vertical axis shows the amount of torque and horsepower produced. Comparing the stock and
modified torque and horsepower curves can tell you how a configuration performs in a specific RPM range.
Stock 1584 Torque
Stock 1584 Horsepower
110ci Stage I Torque
110ci Stage I Horsepower
horsepower & torque
While many judge a motorcycle’s performance solely in terms of horsepower, torque is an equally important
factor in the equation. In a nutshell, torque is the twisting force that gets your bike moving, while
horsepower is the effort required to keep it moving — meaning that torque influences acceleration, while
horsepower determines velocity. Your goal should be to reach the balance between horsepower
and torque that most closely matches the performance you need.
warranty & caution
screamin eagle
’
®
If you want to get the most out of your machine, precise tuning is
an absolute. Screamin’ Eagle Performance Parts supply the raw
power you need and distinct sound you want while keeping you within
the law. All our street-legal configurations are factory-tested for
high performance and unmatched reliability.
Ov e r v i e w
war r a n t y
cau t i On
Harley-Davidson has the engineering
expertise, the sophisticated dyno lab and
complete testing facilities to provide
enthusiasts with a line of performance
products designed to produce good,
solid, reliable horsepower and torque.
Engine related performance parts are
intended for the experienced rider only.
Installation of Screamin’ Eagle® products,
and similar off-road or competition
products from other manufacturers, except
some street-legal offerings installed by
authorized Harley® dealers, may void your
H-D® limited vehicle warranty. Installation
of a California performance kit on a
49-state model motorcycle or a 49-state
performance kit onto a California model
motorcycle will void manufacturers
warranty, as it will not result in a streetlegal configuration.
Harley-Davidson® motorcycles modified with
some Screamin’ Eagle® high-performance
engine parts must not be used on public roads
and in some cases may be restricted to
closed-course competition.
screamin’ eagle racing
®
465
feared by competitors, loved by spectators.
Victory is measured in milliseconds. Quarter-mile or flat track, you’ll find H-D® riders running
out front. Keeping them in the lead are genuine Screamin’ Eagle Pro Racing Parts—engineered
for the track, and destined for the winner’s circle. As part of our commitment to the sport, we proudly
support NHRA®, AMA® and AHDRA®, organizations that move enthusiasts from the stands
to the starting line.
three ways to feel the heat
NHRA® full tHRottle ® PRo StoCK Moto RCYCle RACING
Experience the ultimate in side-by-side two-wheeled competition. This
elite class of professional racing delivers a high octane, high adrenaline
rush like no other. With blazing speeds up to 200 mph, NHRA Pro Stock
Motorcycle drag racing is the culmination of perfect timing, raw
horsepower and flawless precision. To follow the Screamin’ Eagle®/
Vance & Hines factory team, visit www.nhra.com.
A M A® P R o f l At t R A C K R A C I N G
a new kind of icon
Harley-Davidson® motorcycles are the official motorcycle of the National Hot Rod Association (NHRA®). To feel the power and excitement
of professional drag racing, visit an NHRA event and experience the Harley-Davidson Acceleration Nation® display. Exhibits feature
the latest motorcycles, photo opportunities and a chance to race two specially prepared V-Rod® motorcycles on a drag strip simulator.
Some battles are best fought on the dirt. AMA Pro Flat Track Racing blends
tradition with sights, sounds and action to produce the best in wheelto-wheel competition. Balanced on a razor’s edge at speeds up to 140 mph,
purpose-built Harley-Davidson® XR-750-powered motorcycles battle the
competition in one of the most exciting spectator sports on two wheels.
To follow the Harley-Davidson factory team, visit “Flat Track News”
at www.harley-davidson.com.
A H D R A® S C R e A M I N’ e A G l e ® C l AS S R A C I N G
nhra.com
amaflattrack.com
ahdra.com
Visit www.harley-davidson.com for schedules and information on
Harley-Davidson racing.
If you ever wondered what it would feel like to tear down the track, the time
to make that dream a reality is now. AHDRA competition provides all
enthusiasts the opportunity to experience the high-octane adrenaline of drag
racing. With your street bike or race-prepped machine, there are five
Screamin’ Eagle classes — including the VRXSE Destroyer™ class — to put
you out on the track and in the zone. For full details, visit www.ahdra.com.
SHOw anD GO
What do Screamin’ Eagle
engineers do in their spare
time? They build fast bikes
like this strip-conquering
113 cubic inch Dyna® Street
Bob® race bike.
harley-davidson race catalog
Perfected by time and proven by champions, Screamin’ Eagle® Pro
can take your bike to a level of performance you never thought
possible. For the latest information on Screamin’ Eagle Pro Racing
Parts, see your Harley-Davidson dealer, or visit www.harleydavidson.com/racecatalog and download a copy of the Screamin’
Eagle Pro catalog. Harley-Davidson® motorcycles modified with
Screamin’ Eagle® Pro performance parts must not be used on
public roads and may be restricted to closed-course competition.
www.harley-davidson.com/racecatalog
On his way to winning the 2008 NHRA® Pro Stock world championship,
Screamin’ Eagle/Vance & Hines racer Eddie Krawiec set both his
career-best elapsed time and top speed aboard his V-Rod ® motorcycle.
Teammate Andrew Hines was the No. 2 qualifier in the Countdown to
One playoffs and set his best elapsed time at 6.875 seconds in Madison, IL.
Clinching the 2008 AMA Grand National Twins Championship,
Kenny Coolbeth became the sixth racer in history to win three
consecutive titles. Wrecking Crew member Bryan Smith had
his best season yet with a second place finish in the final points
standings. Teammate Joe Kopp won six races and finished
fourth in points, while Jared Mees posted a strong top-ten finish.
screamin’ eagle stAGe kIts
®
life stages
Developed specifically for fuel-injected Harley-Davidson® motorcycles, Screamin’ Eagle® StreetLegal Stage Kits eliminate the guesswork and the need for trial-and-error testing normally
associated with engine modifications. Just define your performance goals, and pick the Stage Kit
that gets you there.
dynO chArts
Twin Cam 96 ® Stock vs. 96 ci Stage I Kit
Twin Cam 96 Stock vs. 103ci Stage I Kit
Twin Cam 96 Stock vs. 110 ci Stage I Kit
Stage I aIr Cleaner
Stage I BIg Bore
Stage I BIg DISplaCement
Let It Breathe The first step to unleashing the power of a
V-Twin motor is to let it breathe. The engine is an air pump,
so the more air and fuel it can swallow, burn and exhale,
the more power it produces. Adding a Stage I High Flow or
Heavy Breather Air Cleaner and Street Performance
Muffler combination produces a lot of “bang for the buck,”
and is a great place to start your performance build.
Open It Up Getting inside the engine and adding big bore
cylinders and matching pistons is the fastest way to
increase your bike’s pulling power. When the torque curve
peaks early and continues to pull all the way through the
mid-range, you feel it. Big bore engines provide the power
required to pass a slow moving camper or to pull a loaded
bike up a long grade. Want even more? Step up to the Big Bore
Stage II Kit and you add performance-matched cams for
measurable increases in torque and horsepower.
Get It All There’s no substitute for cubic inches. Screamin’
Eagle® 110 kits for Twin Cam 96 ™ models deliver hard-hitting
Street Legal performance with proven reliability. Original
Equipment on the Harley-Davidson® Screamin’ Eagle® CVO™
motorcycles, these Stage I Kits feature system-matched
cylinders, heads, pistons, cams and ECM calibrations for
demonstrated performance.
cAUtIOn IcOns
go lIght These Screamin’ Eagle® products are 50-state street-legal for sale and use on all vehicles, including those that are pollution-controlled.
StophanD Harley-Davidson® motorcycles modified with some performance engine parts must not be used on public roads and in some cases may be restricted to closed-course
competition. Those performance parts identified with a stophand symbol are U.S. EPA legal, but are NOT legal for sale or use in California on pollution-controlled motor vehicles.
California guidelines on tampering can also lead to substantial fines and penalties.
CalIfornIa These Screamin’ Eagle products are street legal for sale and use on pollution-controlled vehicles in the state of California.
A
SCREAMIN’ EAGLE 467
®
XL Stage Kits
A. Screamin’ Eagle® Sportster® 883cc to
1200cc Stage I Conversion Kit*
Make your Iron 883 roar. This complete conversion kit will
alter the personality of your 883-equipped Sportster model.
Designed to bring your XL883 model up to XL1200 specifications, this kit includes Sportster Stage I Air Cleaner Kit,
XL1200 Cylinder Heads, and XL1200 Cylinders and Pistons.
Kit includes black highlighted cylinders and cylinder heads. No
case machining is required for installation. Street legal when
used with stock mufflers. All models require ECM calibration*
(priced separately).
29784-07
Black.
$1,199.95
Fits ’07-later XL883 models.
*Recalibration is required for proper installation, and will allow
engine to rev to 7000 RPM. See dealer for details.
B.Screamin’ Eagle Sportster Stage I
Air Cleaner Kit*
The XL Stage I Air Cleaner Kit provides increased airflow to
boost the power of your fuel injected Sportster model. The
complete kit features a composite air cleaner back plate, air
cleaner cover adapter, a high-flow washable synthetic media
filter element that does not require oiling, and a breather
system that routes gasses and excess oil directly into the
intake. Kit also includes cover trim, and all mounting hardware.
Street legal when used with stock mufflers. All models require
ECM calibration* (priced separately).
29782-07A Fits ’07-later XL models.
$139.95
SCREAMin’ Eagle
*Recalibration is required for proper installation, and will allow
engine to rev to 7000 RPM. See dealer for details.
2
A. Screamin’ Eagle Sportster 883cc to 1200cc Stage I Conversion Kit
B
B
130
130
120
120
110
110
100
100
90
90
80
80
70
70
60
60
50
50
Stock 1200 TQ
Stock 1200 HP
1200 Stage I TQ
1200 Stage I HP
40
30
20
2
B. Screamin’ Eagle Sportster Stage I
Air Cleaner Kit
2
2.5
3
3.5 4 4.5 5
5.5
6 6.5
Engine Speed (rpm x 1000)
40
30
20
7
Corrected Rear Wheel Horsepower (hp)
Corrected Rear Wheel Torque (lb-ft)
Sportster 1200 Stock vs.
1200 Stage I Kit
(P/N 29782-07 shown)
CAUTION: Harley-Davidson EFI systems will not compensate for
any component changes. Do not mill heads or increase compression in any way. Do not use cams other than those supplied in the
kit. Do not change kit components. Failure to comply may result
in engine damage.
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
468
SCREAMIN’ EAGLE
®
Twin Cam Stage Kits
A
25
A. SCREAMin’ EAglE® StREEt lEgAl 110 CUBiC inCh
StAgE i Kit foR Efi ModElS*
Bring your Twin Cam motorcycle up to the same displacement
and power output as the CVO Screamin’ Eagle® models – a
gigantic 1800cc’s. This street legal kit combines all the proven
components of the CVO Screamin’ Eagle models – the 4" bigbore forged pistons and cylinders, SE-255 camshafts, and
cylinder heads with automatic compression release. The
Screamin’ Eagle cylinder heads and forged piston combination offers a 9.3:1 compression ratio for easy starting. The
cylinder heads also prominently feature the “Screamin’ Eagle
110" script. Kit includes all required gaskets (except primary
cover and transmission interface gasket) and hardware to
complete the installation. Installation requires case boring.
Professional installation recommended. Separate purchase
of cam spacers is required. See service manual for proper
procedure and cam spacer part numbers. Requires separate
purchase of appropriate Automatic Compression Release
Wiring Harness. All EFI-equipped models require ECM calibration* (priced separately).
Fits 50-state ’10 Touring models (except FLHX and
FLTRX). Kit includes CVO Air Cleaner Back Plate.
27501-10
27504-10
Black.
Silver.
$1,449.95
$1,449.95
Fits 50-state ’10 FXDF and FXDWG models.
Kit includes Heavy Breather Air Cleaner.
27505-10
Black.
$1,675.95
Fits 49-state ’09 Touring models.* Kit includes
CVO Air Cleaner Back Plate and Catalytic Header Pipe.
27501-09
27504-09
Black.
Silver.
$1,675.95
$1,675.95
Fits 49-state ’09 FXDF models.* Kit includes
Heavy Breather Air Cleaner and Catalytic Header Pipe.
27505-09
Black.
$1,979.95
Fits 49-state ’09 Softail® models with Staggered Dual
Mufflers.* Does not fit FLSTF and FLSTN models. Kit
includes Heavy Breather Air Cleaner and CVO Mufflers.
27508-09
27506-09
Black.
Silver.
$1,979.95
$1,979.95
Fits 49-state ’08 Touring models.* Kit includes
CVO Air Cleaner Back plate, and CVO mufflers.
27800-08A
27801-08A
Black.
Silver.
$2,459.95
$2,459.95
Fits ’07-later HDI Touring models, ’07-later HDI Dyna models,
and ’07-’09 HDI FLSTF and ’07 FXSTD Softail models.
Street legal on HDI-configured models when installed
with Original Equipment air cleaner and exhaust.
29866-07A
Black.
Stage i
Air Cleaner
heavy Breather
Air Cleaner
$2,295.95
Fits 49-state ’08 FLSTF models.* Kit includes
Heavy Breather Air Cleaner and CVO mufflers.
27804-08
Black.
$2,459.95
touring
(’07-’08 only)
dyna
(’07-’08 only)
Softail
(’07-’09 only)
*Recalibration is required for proper installation, and will allow engine to rev to
5600 RPM. See dealer for details. Labor cost not included.
When installed by an authorized Harley-Davidson Dealer at the time of vehicle delivery,
these kits do not impact the vehicle’s limited warranty.
NOTE: Installation of a California performance kit onto a 49-state model motorcycle, or
a 49-state performance kit onto a California model motorcycle will void manufacturers
warranty, as it will not result in a street legal configuration.
A. SCREAMin’ EAglE StREEt lEgAl 110 CUBiC inCh StAgE i Kit foR Efi ModElS
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
B
25 6
SCREAMIN’ EAGLE 469
®
Twin Cam Stage Kits
B. SCREAMin’ EAglE® StREEt lEgAl Big BoRE
StAgE ii Kit foR Efi ModElS – 103 CUBiC inChES*
The Stage II Big Bore Kit provides the parts you need to
increase the horsepower of your EFI-equipped model. The kit
increases the displacement of your Twin Cam-equipped model
from 96 cubic inches (1584cc) to 103 cubic inches (1690cc).
Includes Stage II (SE-255) cams, Big Bore cylinders, Big
Bore flat top pistons, clips, and a Stage I Air Cleaner Kit with
one-piece back plate, integral breathers, all mounting hardware, and gaskets. Also includes a high performance clutch
spring. Separate purchase of cam spacers is required. See
manual for proper procedure and cam spacer part numbers.
Requires separate purchase of primary cover gasket. Not all
components shown. 49-state kits include catalyst mufflers or
headers, and California kits are street legal on California pollution controlled vehicles when used with Original Equipment
mufflers. All EFI-equipped models require ECM calibration*
(priced separately).
Fits 50-state ’10 Softail models.
Also fits ’08-later California Softail models.*
27543-08
Black.
$899.95
Fits 50-state ’10 Touring models (except FLHTK, FLHX,
FLTRX and Trike). Also fits ’08-later California Touring
models (except Trike, FLHTK, FLHX and FLTRX).*
27557-08
27558-08
Black.
Silver.
$899.95
$899.95
Fits 50-state ’10 Dyna models. Also fits ’08-later
California Dyna models (except FXDF and FXDWG)*
27545-08
Black.
$899.95
Fits 49-state ’09 Touring models (except Trike).
Not street legal in California.*
27564-09
27565-09
Black.
Silver.
$899.95
$899.95
Fits 49-state ’08 Touring models.
Not street legal in California.*
27532-08
27533-08
Black.
Silver.
$1,199.95
$1,199.95
27541-08
Black.
$1,199.95
Fits ’09 Dyna FXDF models.
50-state street legal.*
27566-09
Black.
$899.95
notiCE: Installation of automatic or manual compression
releases on large displacement engines is highly recommended.
touring
Softail
*Recalibration is required for proper installation, and will allow engine to rev to
6200 RPM. See dealer for details. Labor cost not included.
When installed by an authorized Harley-Davidson Dealer at the time of vehicle delivery,
these kits do not impact the vehicle’s limited warranty.
NOTE: Installation of a California performance kit onto a 49-state model motorcycle, or
a 49-state performance kit onto a California model motorcycle will void manufacturers
warranty, as it will not result in a street legal configuration.
B. SCREAMin’ EAglE StREEt lEgAl Big BoRE StAgE ii Kit foR Efi ModElS – 103 CUBiC inChES
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
SCREAMin’ EAglE
Fits 49-state ’08-’09 Dyna® models (except FXDF).
Not street legal in California.*
470
SCREAMIN’ EAGLE
®
Twin Cam/Evo Stage Kits
A
A. SCREAMin’ EAglE® Big BoRE StAgE i Kit
foR Efi ModElS – 103 CUBiC inChES*
This Big Bore Kit lets you increase the displacement of your
Twin Cam 96 engine-equipped model from 96 cubic inches
(1584cc) to 103 cubic inches (1690cc). Includes Big Bore
cylinders, Big Bore flat top piston assemblies and a Stage I Air
Cleaner Kit with one-piece back plate, integral breathers, all
mounting hardware, and gaskets. A high performance clutch
spring is included to provide the additional clutch capacity
required by the extra torque. Requires separate purchase of
primary cover gasket. This kit is street legal when used with
stock mufflers. (Not all components shown.) All EFI-equipped
models require ECM calibration* (priced separately).
*Recalibration is required for proper installation, and will allow
engine to rev to 6200 RPM. See dealer for details. Labor cost
not included.
Fits all ’07 Twin Cam and ’08-later Softail® models.*
29903-07A
29904-07A
Black.
Silver.
$639.95
$639.95
Fits ’08-later Dyna® models.*
27535-08
27536-08
Black.
Silver.
$639.95
$639.95
Fits ’08-later Touring models (except FLHTK and Trike).*
27539-08
27540-08
Black.
Silver.
$639.95
$639.95
Fits European ’10 Touring models. Legal on HDI configured
models when used with stock exhaust and air cleaner.
27534-10
Black.
$639.95
notiCE: Installation of automatic or manual compression
releases on large displacement engines is highly recommended.
B. SCREAMin’ EAglE® EvolUtion 1340 Efi
StAgE i pERfoRMAnCE Kit**
This 50-state street legal kit increases torque throughout
the RPM range, with a 15% increase at the peak. Stage I Kit
includes air cleaner and breather kit, and all required hardware. All models require ECM calibration** (priced separately).
These kits are designed to work with stock mufflers.
29387-97B
$119.95
Fits ’97-’98 Evolution® 1340-equipped EFI models only.
Also fits ’95-’96 Evolution 1340-equipped EFI models
when used with ECM P/N 32423-97B. (Does not fit
Twin Cam-equipped models.)
**Recalibration is required for proper installation, and will
allow engine to rev to 6000 RPM. See dealer for details.
Labor cost not included.
C. SCREAMin’ EAglE pERfoRMAnCE
AiR ClEAnER foR vRSC™ ModElS
This high flow air cleaner provides the clean stable air the
engine needs for maximum performance. The washable filter
element does not require oiling.
29793-02C Fits ’02-later VRSC™ models.
$64.95
2
®
A. SCREAMin’ EAglE Big BoRE StAgE i Kit foR Efi ModElS – 103 CUBiC inChES
B
C
CAUtion: Dealer installation required – failure to comply may
result in a lean fuel condition and severe engine damage.
CAUtion: Harley-Davidson EFI systems will not compensate
for any component changes. Do not mill heads or increase compression in any way. Do not use cams other than those supplied
in the kit. Do not change kit components. Failure to comply may
result in engine damage.
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
2
B. SCREAMin’ EAglE EvolUtion 1340
Efi StAgE i pERfoRMAnCE Kit
2
C. SCREAMin’ EAglE pERfoRMAnCE
AiR ClEAnER foR vRSC ModElS
d
SCREAMIN’ EAGLE 471
®
Air Cleaner Kits
d. SCREAMin’ EAglE® StAgE i AiR ClEAnER Kit –
twin CAM ModElS*
Kit features a one-piece cast back plate with integral breather
and mounting brackets for simplified installation, and a “state
of the art” synthetic media washable air cleaner element that
does not require oiling. If you want more torque from your Twin
Cam-equipped model, this kit provides a freer breathing capability to pump-up the power of your EFI-equipped motorcycle.
This kit includes air cleaner, breather, and all required hardware.
Street legal when used with stock mufflers. All EFI-equipped
models require ECM calibration* (priced separately).
2
d. SCREAMin’ EAglE StAgE i AiR ClEAnER Kit – MUlti-fit
d
d
*Recalibration is required for proper installation, and will allow
engine to rev to 6200 RPM. See dealer for details. Labor cost
not included.
29773-02C
$139.95
Fits ’08-later Softail and ’08-later Dyna equipped with
accessory Air Cleaner Covers (stock on ’08 CVO Dyna).
(FLSTSB models require separate purchase of Gasket
P/N 29591-99 and Screw P/N 29703-00.) Also fits ’01-’07 EFI
Softail, ’02-’07 EFI Touring, ’04-’07 EFI Dyna and models
equipped with Accessory Air Cleaner Covers. (Stock on ’05
FLSTFI 15th Anniversary, ’05-’07 CVO Softails, ’07 CVO Dyna,
and ’07 CVO Road King models.) ’06-’07 CVO Electra Glide
models require the separate purchase of Air Cleaner Cover
P/N 29121-07. Air Cleaner Trim is sold separately.*
29406-08
$149.95
Fits ’08-later Dyna models with Original Equipment
Air Cleaner Cover.*
29260-08
$139.95
Fits ’08-later Touring and Trike models with Original
Equipment 50mm Throttle Body. ’08-later CVO
models require separate purchase of Air Cleaner
Cover P/N 29121-07.*
29489-99C
$139.95
Fits ’99-’01 fuel-injected Touring models.*
Fits ’99-later Softail® , ’02-’07 Touring and ’99-’07 Dyna®
models equipped with Screamin’ Eagle Stage Kits or High Flow
Air Cleaner Kits. Installation may require separate purchase of
(2) O-Ring P/N 11292, (2) Breather Tube P/N 29557-05, and
(2) Breather Screw P/N 29465-99. See your dealer for details.
29510-05
29586-06
2
2
d. SCREAMin’ EAglE StAgE i AiR
ClEAnER Kit – ’08-lAtER toURing
$49.95
$39.95
Fits ’08-later Dyna models.
29170-08
29119-08
d. SCREAMin’ EAglE StAgE i AiR
ClEAnER Kit – ’08-lAtER dynA
Chrome.
Wrinkle Black.
Chrome.
Wrinkle Black.
$49.95
$39.95
Fits ’08-later Touring models.
29624-08
29319-08
Chrome.
Wrinkle Black.
$49.95
$39.95
E
’08-later touring
Multi-fit
’08-later dyna
2
E. SCREAMin’ EAglE AiR ClEAnER BACK plAtE Kit
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
SCREAMin’ EAglE
E. SCREAMin’ EAglE® AiR ClEAnER
BACK plAtE Kit
Finished in brilliant chrome or wrinkle black, this replacement
back plate complements the finish of your engine. Cast back
plate design features integral breather and mounting brackets
for simplified installation.
472
SCREAMIN’ EAGLE
®
Air Cleaner Kits
A
nEw
A. SCREAMin’ EAglE® StREEt lEgAl “hEAvy
BREAthER” pERfoRMAnCE AiR ClEAnER Kit
This high-flow forward-facing exposed element Air Cleaner Kit
is sure to turn heads at the starting line. Featuring a polished
elbow and exposed filter, this unique air cleaner system offers
improved performance and air flow when compared to the
stock or Screamin’ Eagle High Flow air cleaner. The washable
and re-chargeable filter features a bright chrome end cap with
a laser-engraved Screamin’ Eagle logo. Intake tube and back
plate are made from die cast lightweight aluminum, and are
polished and chrome-plated or painted black for a brilliant
finish. The back plate features integral breathers and sealed
breather bolt plug. Kit includes a water-repellent rain sock and
all mounting hardware. All EFI-equipped models require ECM
calibration* (priced separately).
Fits ’08-later Touring models. Does not fit models equipped
with fairing lower glove boxes. Street legal when used with
Original Equipment throttle body.*
29006-09A
29253-08A
Gloss Black.
Chrome.
$299.95
$299.95
2
Fits ’08-later Touring models equipped with Fairing Lower
Glove Boxes. Street legal when used with Original Equipment
throttle body.
28716-10
Compact Design – Chrome.
A. SCREAMin’ EAglE “hEAvy BREAthER” pERfoRMAnCE AiR ClEAnER Kit –
SoftAil/dynA – ChRoME
$299.95
Fits ’08-later Dyna® and Softail® models.*
29098-09
29299-08
Gloss Black.
Chrome.
$299.95
$299.95
A
B
Fits ’08-later XL models.*
29080-09
29264-08
Gloss Black.
Chrome.
$299.95
$299.95
*Recalibration is required for proper installation. See dealer for
details. Labor cost not included.
B. SCREAMin’ EAglE “hEAvy BREAthER”
RAin SoCK
Caught in the rain? This element cover is tailored to provide
a perfect fit, decorated with the Screamin’ Eagle Logo. Made
from breathable and water resistant material, this cover
lets air through while water beads and rolls off your Heavy
Breather Air Cleaner element. Don’t get caught without it.
29493-05
$19.95
Fits models equipped with Heavy Breather Air Cleaner Kits.
C. SCREAMin’ EAglE “hEAvy BREAthER”
dECoRAtivE MEdAllion
Add the finishing touch to your Heavy Breather Air Cleaner
by installing this medallion. Featuring a bright chrome-plated
die cast base and contrasting black inlay with diamond cut
“Screamin’ Eagle” script. Easy to install.
29017-09
$19.95
Fits models equipped with Heavy Breather Air Cleaner Kits.
d. SCREAMin’ EAglE hEAvy BREAthER dECoRAtivE
EndCAp – williE g. SKUll
Add a sinister touch to your Heavy Breather Air Cleaner.
Chrome-plated self-adhesive cover features a forward-facing
“Willie G. Skull” medallion.
2
2
B. SCREAMin’ EAglE
“hEAvy BREAthER” RAin SoCK
A. SCREAMin’ EAglE “hEAvy BREAthER”
pERfoRMAnCE AiR ClEAnER Kit –
SoftAil/dynA – BlACK
C
d
nEw
28720-10
$29.95
Fits models equipped with Screamin’ Eagle Heavy Breather
Air Cleaner Kits (except Compact Version P/N 28716-10).
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
C. SCREAMin’ EAglE “hEAvy BREAthER”
dECoRAtivE MEdAllion
d. SCREAMin’ EAglE “hEAvy BREAthER”
dECoRAtivE EndCAp – williE g. SKUll
E
NEw
SCREAMIN’ EAGLE 473
®
Air Cleaner Kits
E. Screamin’ Eagle® “Ventilator”
Performance Air Cleaner Kit
Stylish low-profile exposed element air cleaner kit provides
increased air flow to boost the power of your fuel injected
engine. The track-inspired exposed element adds a purposeful look to the bike, and the included waterproof rain sock
protects the filter during inclement weather. This easy-toinstall kit includes low-profile air cleaner cover, high-flow filter
element, back plate, Screamin’ Eagle badge, protective rain
sock, and all required installation hardware. Street legal when
used with stock mufflers. All EFI-equipped models require
ECM calibration* (priced separately).
Fits ’09-later Touring models. Also fits ’09-later Trike models.
29490-09
29915-09
Chrome.
Gloss Black.
$225.25
$239.95
Fits ’10 Dyna® and Softail® models.
28721-10
28722-10
2
E. Screamin’ Eagle “Ventilator” Performance Air Cleaner Kit – Chrome
E
NEw
E
Chrome.
Gloss Black.
$239.95
$239.95
F. Screamin’ Eagle “Heavy Breather” and
Street Performance Exhaust Kit
This street legal combination pairs two great accessories in
one convenient package, the Screamin’ Eagle Heavy Breather
air intake system and the Screamin’ Eagle Blunt Revolver
Street Performance mufflers. Kit provides high style, improved
sound quality, and great performance. All EFI-equipped
models require ECM calibration* (priced separately). Mufflers
are 50-state street legal on stock displacement ’08-later FXDF
and ’10 FXDWG models.
29408-08
$619.95
Fits ’08-later FXDF and ’10 FXDWG models.
2
E. Screamin’ Eagle “Ventilator”
Performance Air Cleaner Kit –
Gloss Black
SCREAMin’ Eagle
*Recalibration is required for proper installation. See Dealer for
details. Labor cost not included.
2
E. Screamin’ Eagle “Ventilator” Air
Cleaner – Shown with Rain Sock
F
2
F. Screamin’ Eagle “Heavy Breather” and Street Performance Exhaust Kit
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
474
SCREAMIN’ EAGLE
®
A
Air Cleaner Covers
nEw
A. foRgEd BillEt AlUMinUM AiR ClEAnER CovER
This unique Billet Aluminum Air Cleaner Cover is styled with
inverted V-shape air inlets to complement the V-twin engine
profile, and is designed with a generous open intake to maximize engine breathing. Manufactured from 6061-T6 billet
aluminum, this high-quality forged dual throat air cleaner
cover is expertly CNC-machined to exacting tolerances.
Then, its surfaces are polished mirror-smooth, and chromeplated or black-anodized to match your customizing direction.
The air cleaner kits include complementing brushed aluminum or matte black side inserts and a hidden mounting bolt.
Complete the installation with one of the numerous custom
medallion inserts (sold separately).
Fits Twin Cam and ’93-’99 Evolution® 1340 carbureted models
equipped with Screamin’ Eagle® Air Cleaner Kits (cone shaped
filter). See your dealer for specific applications.
29745-00A
29506-09
Chrome.
Black Anodized.
$219.95
$219.95
Shown with:
BillEt AiR ClEAnER SidE inSERt Kit
Add a touch of color to the H-D® Forged Billet Aluminum Air
Cleaner Cover. These easy-to-install Side Inserts are available
in a matte black finish to add depth and dimension.
97005-02
Fits Chrome Forged Billet Aluminum Air
Cleaner Cover P/N 29745-00A.
A. foRgEd BillEt AlUMinUM AiR ClEAnER CovER – BlACK AnodizEd
(Shown with BillEt AiR ClEAnER MEdAllion Kit – dARK CUStoM logo CollECtion)
$6.95
Also shown with:
BillEt AiR ClEAnER MEdAllion KitS
These polished and chrome-plated inserts for the Billet Air
Cleaner Cover snap easily into place. The kit includes an O-ring
gasket and individual decorative medallions.
A
A
Fits Forged Billet Aluminum Air Cleaner Cover P/N 29745-00A
and 29506-09.
29902-09
29929-07
29888-06
29898-06
Dark Custom Logo.
Screamin’ Eagle 96 Cubic Inch.
Screamin’ Eagle 103 Cubic Inch.
Screamin’ Eagle 110 Cubic Inch.
$38.95
$38.95
$38.95
$38.95
B. SMooth AiR ClEAnER CovER
Wrap your Screamin’ Eagle® round air cleaner element in style.
The mirror-chrome low-profile Air Cleaner Cover shields the
element and opens breathing space between the backing
plate and the cover. Cut-away bottom design exposes the air
cleaner element to maximize the air flow. Easy-to-install, the
one-piece cover is the ideal complement to the Chrome Air
Cleaner Back Plate P/N 29510-05.
29153-07
$44.95
Fits ’99-later Twin Cam models equipped with Screamin’
Eagle Stage Kits or High Flow Air Cleaner Assembly.
’08 Dyna® models require separate purchase of Stage I
Air Cleaner Kit P/N 29773-02C.
A. BillEt AiR ClEAnER And MEdAllion Kit –
SCREAMin’ EAglE 96 CUBiC inCh
A
A. BillEt AiR ClEAnER And MEdAllion Kit –
SCREAMin’ EAglE 103 CUBiC inCh
B
2
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
A. BillEt AiR ClEAnER And MEdAllion Kit –
SCREAMin’ EAglE 110 CUBiC inCh
B. SMooth AiR ClEAnER CovER
screamin eagle
exhaust
’
®
Street-sweeping sound and captivating style are the most prominent
features of these pipes, but it’s the added torque and horsepower
that really make them worth it. Street Performance Mufflers are perfect
for immediate results over a wide RPM range, while the ballistic
shape lets everyone know what they’re up against.
power vs. noise
A loud exhaust system doesn’t mean improved
performance. Screamin’ Eagle Street
Performance Mufflers are designed to
significantly increase airflow and add
torque and horsepower you can feel — with
a twist of the throttle. Engineered with
carefully-managed back pressure, Street
Performance Mufflers deliver where it
counts —during a roll-on pass or on a
long run up a steep grade. All street-legal
Harley-Davidson exhaust systems meet EPA
regulations and carry an EPA stamp.
Freedom and the right to ride are at the
heart of motorcycling. We understand that
unless we, as riders, take steps to be socially
responsible, our right to ride and our
lifestyle may be in jeopardy. Remember to
ride respectfully.
SCREAMIN’ EAGLE
476
®
Sportster Exhaust
A
A. SCREAMin’ EAglE® StREEt pERfoRMAnCE
Slip-on MUfflERS – SpoRtStER® ShoRty dUAl
Street legal high-flow mufflers are factory tuned to deliver an
aggressive exhaust note and improved performance comparable to Screamin’ Eagle II mufflers. Chrome-plated mufflers
feature a new ballistic-shape inlet and a deep embossed
“Screamin’ Eagle” signature script. 50-state street legal on
stock ’07-later model engines.
Fits ’07-later XL models. Installation requires separate
purchase of Muffler Clamps P/N 65296-95A (Qty. 2).
Slash Out.
Slash Down.
80502-07
80503-07
$299.95
$299.95
2
A. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on MUfflERS –
SpoRtStER ShoRty dUAl, SlASh down
130
130
120
120
110
110
100
100
90
90
80
80
70
70
60
60
50
50
Stock 1200 TQ
Stock 1200 HP
1200 SE Exhaust TQ
1200 SE Exhaust HP
40
30
20
2
2.5
3
3.5 4 4.5 5
5.5
6 6.5
40
30
Corrected Rear Wheel Horsepower (hp)
Corrected Rear Wheel Torque (lb-ft)
SpoRtStER 1200 StoCK vS.
SE StREEt pERfoRMAnCE MUfflERS
(P/N 80503-07 shown)
A
20
7
Engine Speed (rpm x 1000)
NOTE: There is no warranty on exhaust pipes and
mufflers with regard to any discoloration. Blueing is
caused by tuning characteristics, cam timing, carburetor
jetting, over-heating, etc. and is not caused by defective
manufacturing.
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
2
A. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on MUfflERS –
SpoRtStER ShoRty dUAl, SlASh oUt
B
SCREAMIN’ EAGLE 477
®
Sportster Exhaust
B. SCREAMin’ EAglE® StREEt pERfoRMAnCE
Slip-on ShoRty dUAl MUfflERS – JEt BlACK
Street performance factory tuned mufflers in a tough black
finish. Mufflers feature high flowing internals to maximize
performance, an aggressive exhaust note, and a unique black
ceramic coating that stands up to abuse. These pipes are a
“must” to get the blacked-out look. 50-state street legal on
stock ’07-later model engines.
80726-09A
$389.95
Fits ’07-later XL models. Installation requires separate
purchase of Muffler Clamps P/N 65296-95A (Qty. 2).
C. SCREAMin’ EAglE® JEt BlACK BUCKShot
ExhAUSt ShiEld Kit
Extend the blacked-out look along the bike’s entire profile.
These formed steel exhaust shields feature a unique jet
black ceramic coating that complements the jet black
Screamin’ Eagle Street Performance Slip-On Mufflers
P/N 80726-09A. The black coating maintains its uniform black
finish, and has survived stringent Harley-Davidson testing for
durability and corrosion resistance. The Sportster model
shields feature a perforated “Buckshot” design that exposes
the head pipe for a raw, rebellious look. Manufactured to
Original Equipment standards for exacting fit, the easy-toinstall kit includes front and rear head pipe shields.
$149.95
SCREAMin’ EAglE
64924-09
Fits ’04-later XL models.
2
B. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on MUfflERS –
SpoRtStER ShoRty dUAl, JEt BlACK
nEw
C
2
C. SCREAMin’ EAglE JEt BlACK BUCKShot ExhAUSt ShiEld Kit
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
478
SCREAMIN’ EAGLE
®
Sportster Exhaust
A
A. hARlEy-dAvidSon® Slip-on CAtAlySt
MUfflERS foR SpoRtStER® ModElS
Choose your style, Slash Down or Baloney Cut. These 49-state
street legal mufflers offer great sound quality and feature the
“Harley-Davidson” script on the rear muffler. Not legal for sale
or use on California catalyst equipped vehicles.
Fits ’06 XL models.
80417-06
80416-06
Tapered Baloney Cut.
Slash Down.
$299.95
$299.95
B. hARlEy-dAvidSon Slip-on MUfflERS
foR SpoRtStER ModElS
These 49-state street legal mufflers have a classic slash down
or tapered baloney design that adds a custom touch to any
XL. The unique cutout nestles into the Original Equipment
crossover. These chrome-plated mufflers have the “HarleyDavidson” script stamped in the rear muffler.
Fits ’04-’05 XL models.
80415-04
80412-04
Slash Down.
Tapered Baloney Cut.
5
$259.95
$259.95
C. hARlEy-dAvidSon Slip-on MUfflERS
These slip-on mufflers offer great sound and classic “HarleyDavidson” script on the rear muffler. These big-body mufflers
are available in a sporty 45-degree baloney cut.
Fits ’98-’03 XL (except 883R), ’92-’03 883 Hugger®, ’96-’03
XL1200C and ’92-’03 XLs equipped with Profile Low Rear
Suspension P/N 54571-94A.
80102-97
Baloney Cut*.
A. hARlEy-dAvidSon Slip-on CAtAlySt MUfflERS – SlASh down
B
$219.95
5
B. hARlEy-dAvidSon Slip-on MUfflERS – tApEREd BAlonEy CUt
C
*NOTE: Due to increased diameter of these mufflers some
realignment of headpipes is usually required. It is
recommended to replace exhaust port gaskets, P/N 6532483A (stock) or P/N 17048-98 (performance), to avoid
tendency of headpipes to return to original position when
re-tightened.
*NOTE: Due to the increased diameter of these mufflers,
variation in support tube and frame mounting tab location
(pre ’98 vehicles), some contact may be experienced between
the support tube and the outlet of the front muffler. Adjust as
required for clearance.
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
5
C. hARlEy-dAvidSon Slip-on MUfflERS – BAlonEy CUt
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
d
nEw
SCREAMIN’ EAGLE 479
®
Dyna Exhaust
d. SCREAMin’ EAglE® StREEt pERfoRMAnCE
MUfflERS – dynA® StAggEREd
dUAl – JEt BlACK
Make your statement before they see you coming. The throaty
Screamin’ Eagle Street Performance sound sets the tone, and
the bold styling drives the note home. One-of-a-kind ballistic
inlet shape flows back past the embossed “Screamin’ Eagle”
logo to the unique “Blunt Revolver” end treatment. The unique
black ceramic coating stands up to abuse and the elements,
and the chrome-finished end caps feature cut-out chambers that expose the jet-black finish below for a bold contrast.
Complete the blacked-out look with Jet Black Exhaust Shields
P/N 65247-09 (sold separately). Mufflers are 50-state street
legal on stock displacement ’08-later FXDF and ’10 FXDWG
models.
80601-09
Fits ’08-later FXDF and ’10 FXDWG models.
Installation requires separate purchase of Muffler
Clamps P/N 65296-95A (Qty. 2).
$389.95
Shown with:
SCREAMin’ EAglE JEt BlACK ExhAUSt
ShiEld Kit
Extend the blacked-out look along the bike’s entire profile.
These formed steel exhaust shields feature the “tommy gun”
cutouts and a unique jet black ceramic coating that complements the jet black Screamin’ Eagle Street Performance
Slip-On Mufflers P/N 80601-09. The black coating maintains
its uniform black finish, and has survived stringent HarleyDavidson testing for durability and corrosion resistance.
Manufactured to Original Equipment standards for exact fit,
the easy-to-install kit includes front and rear head pipe shields.
$229.95
E. SCREAMin’ EAglE® StREEt pERfoRMAnCE
MUfflERS – dynA® StAggEREd dUAl
Make your statement before they see you coming. The throaty
Screamin’ Eagle Street Performance sound sets the tone, and
the bold styling drives the note home. One-of-a-kind ballistic
inlet shape flows back past the embossed “Screamin’ Eagle”
logo to the unique “Blunt Revolver” end treatment. The blackfinished end caps feature cut-out chambers that expose the
mirror-chrome finish below for a bold contrast. Mufflers are
50-state street legal on stock displacement ’08-later FXDF
models.
2
80674-08
Fits ’08-later FXDF and ’10 FXDWG models.
Installation requires separate purchase of
Muffler Clamps P/N 65296-95A (Qty. 2).
$349.95
d. SCREAMin’ EAglE StREEt pERfoRMAnCE MUfflERS – dynA StAggEREd dUAl – JEt BlACK
(Shown with JEt BlACK ExhAUSt ShiEld Kit)
E
2
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
E. SCREAMin’ EAglE StREEt pERfoRMAnCE MUfflERS – dynA StAggEREd dUAl
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
SCREAMin’ EAglE
65247-09
Fits ’08-later FXDF and ’10 FXDWG models with
forward controls.
480
SCREAMIN’ EAGLE
®
A
Dyna Exhaust
A. Screamin’ Eagle® Street Performance
Slip-On Mufflers – Dyna® Shorty Dual
Factory engineers tuned these pipes to satisfy the most
discriminating Harley enthusiast. Aggressive sound quality is paired with performance comparable to Screamin’
Eagle II race-use mufflers, and they’re street legal! Chromeplated mufflers feature a new ballistic-shape inlet and a deep
embossed “Screamin’ Eagle” signature script. Street legal on
stock displacement engines.
Fits ’07 Dyna® models (except ’07 FXDSE2) and ’08-’09
49-state Dyna models (except FXDF, FXDSE2 and FXDFSE).
Installation requires separate purchase of
Muffler Clamps P/N 65296-95A (Qty. 2).
80492-07
80493-07
Slash Out.
Slash Down.
OBSOLETE
$299.95
$299.95
Fits 50-state ’10 Dyna models (except FXDF, FXDWG
and FXDFSE2). Also fits ’08-later California Dyna
models (except FXDF, FXDSE2, FXDFSE/2, and
’10 FXDWG). Installation requires separate purchase
of Muffler Clamps P/N 65296-95A (Qty. 2).
80678-08
Slash Down.
X
$374.95
NOTE: “Screamin’ Eagle” script not included on mufflers
P/N 80678-08. “Screamin’ Eagle” script is available on Muffler
Heat Shield Kit P/N 64806-07A, sold separately (not shown).
OBSOLETE
25
A. Screamin’ Eagle Street Performance Slip-On Mufflers –
Dyna Shorty Dual, Slash Out
A
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
256
A. Screamin’ Eagle Street Performance Slip-On Mufflers –
Dyna Shorty Dual, Slash Down
nEw
B
SCREAMIN’ EAGLE 481
®
Dyna Exhaust
B. SCREAMin’ EAglE® StREEt pERfoRMAnCE
Slip-on ShoRty dUAl MUfflERS – JEt BlACK
Street performance factory tuned mufflers in a tough black
finish. Mufflers feature high flowing internals to maximize
performance, and a rich, aggressive exhaust note that lets
everyone know you’re around. The heat-resistant jet-black
Cermat coating stands up to abuse, and will not fade or blue.
These pipes are a “must” to get the blacked-out custom
look. Kit includes mufflers and jet-black muffler shields with
embossed Screamin’ Eagle logo. EPA stamped, these mufflers
are street legal on stock displacement engines.
80794-10
Slash Down.
$449.95
Fits ’07-later Dyna® models (except FXDF, FXDSE2 and
’10 FXDWG). Installation requires separate purchase of
Muffler Clamps P/N 65296-95A (Qty. 2).
Shown with:
SCREAMin’ EAglE JEt BlACK
ExhAUSt ShiEld Kit
Extend the blacked-out look along the bike’s entire profile.
These formed steel exhaust shields feature a unique jet black
ceramic coating that complements the jet black Screamin’
Eagle Street Performance Slip-On Mufflers. The black coating maintains its uniform black finish, and has survived stringent Harley-Davidson testing for durability and corrosion
resistance. Manufactured to Original Equipment standards for
exact fit, the easy-to-install kit includes front and rear head
pipe shields.
80821-10
$159.95
Fits ’06-later FXD, FXDB, FXDC, FXDL and ’06-’08 FXDWG
models with shorty dual exhaust.
C. hARlEy-dAvidSon® dynA Slip-on MUfflERS
Harley-Davidson Slip-On Mufflers for Dyna models. Choose
your style, slash down or baloney cut. These 50-state street
legal mufflers offer great sound quality, improved performance and feature the “Harley-Davidson” script on the rear
muffler.
Fits ’06 Dyna® models.
80418-06
Slash Down.
$299.95
Fits ’95-’05 Dyna models.
Slash Down.
Baloney Cut.
$299.95
$299.95
SCREAMin’ EAglE
80366-99
80104-99
2
B. SCREAMin’ EAglE StREEt pERfoRMAnCE
Slip-on ShoRty dUAl MUfflERS – JEt BlACK
C
NOTE: Due to increased diameter of these mufflers some
realignment of headpipes is usually required. It is
recommended to replace exhaust port gaskets, P/N 6532483A (stock) or P/N 17048-98 (performance), to avoid
tendency of headpipes to return to original position when
re-tightened.
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
2
C. hARlEy-dAvidSon dynA Slip-on MUfflERS – SlASh down
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
482
SCREAMIN’ EAGLE
®
Softail Exhaust
A
A. SCREAMin’ EAglE® StREEt pERfoRMAnCE
Slip-on MUfflERS – SoftAil® ShoRty dUAl
Street Performance Mufflers harness factory technology to
produce a sound that is undeniably “Harley-Davidson.” Not
only do these mufflers make an aggressive statement with
sound, they boost performance comparable to Screamin’
Eagle II race-use mufflers, and are street legal. Chromeplated mufflers feature a new ballistic-shape inlet and a deep
embossed “Screamin’ Eagle” signature script. Street legal on
stock displacement engines.
Fits ’07 Softail® models equipped with shorty dual exhaust
and ’08-’09 49-state Softail models with shorty dual
exhaust. Installation requires separate purchase of
Muffler Clamps P/N 65296-95A (Qty. 2).
80494-07
80495-07
Slash Out.
Slash Down.
$299.95
$299.95
Fits 50-state ’10 Softail models with shorty dual exhaust.
Also fits ’08-later California Softail models with shorty
dual exhaust. Installation requires separate purchase
of Muffler Clamps P/N 65296-95A (Qty. 2).
80679-08
Slash Down.
$374.95
NOTE: “Screamin’ Eagle” script not included on mufflers
P/N 80679-08. “Screamin’ Eagle” script is available on Muffler
Heat Shield Kit P/N 64806-07A, sold separately (not shown).
256
A. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on MUfflERS –
SoftAil ShoRty dUAl, SlASh down
A
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
25 6
A. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on MUfflERS –
SoftAil ShoRty dUAl, SlASh oUt
nEw
B
SCREAMIN’ EAGLE 483
®
Softail Exhaust
B. SCREAMin’ EAglE® StREEt
pERfoRMAnCE Slip-on ShoRty
dUAl MUfflERS – JEt BlACK
Street performance factory tuned mufflers in a tough black
finish. Mufflers feature high flowing internals to maximize
performance, and a rich, aggressive exhaust note that lets
everyone know you’re around. The heat-resistant jet black
Cermat coating stands up to abuse, and will not fade or blue.
These pipes are a “must” to get the blacked-out custom
look. Kit includes mufflers and jet-black muffler shields with
embossed Screamin’ Eagle logo. EPA stamped, these mufflers
are street legal on stock displacement engines.
80813-10
$449.95
Fits ’07-later Softail models equipped with shorty dual
exhaust. Installation requires separate purchase of Muffler
Clamps P/N 65296-95A (Qty. 2).
Shown with:
SCREAMin’ EAglE JEt BlACK
ExhAUSt ShiEld Kit
Extend the blacked-out look along the bike’s entire profile.
These formed steel exhaust shields feature a unique jet black
ceramic coating that complements the jet black Screamin’
Eagle Street Performance Slip-On Mufflers. The black coating maintains its uniform black finish, and has survived stringent Harley-Davidson testing for durability and corrosion
resistance. Manufactured to Original Equipment standards for
exact fit, the easy-to-install kit includes front and rear head
pipe shields.
$159.95
$159.95
SCREAMin’ EAglE
80818-10
Fits ’08-later FXCW/C models equipped with
shorty dual exhaust.
80824-10
Fits ’07-later FXST, FXSTB and FXSTC models
equipped with shorty dual exhaust.
25
B. SCREAMin’ EAglE StREEt pERfoRMAnCE
Slip-on ShoRty dUAl MUfflERS – JEt BlACK
nEw
B
25
B. JEt BlACK ExhAUSt ShiEld Kit – fxCw
nEw
B
25
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
B. JEt BlACK ExhAUSt ShiEld Kit – fxSt
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
484
SCREAMIN’ EAGLE
®
Softail Exhaust
A
A. SCREAMin’ EAglE® StREEt pERfoRMAnCE
Slip-on MUfflERS – SoftAil® ShotgUn
Tough sound, nice performance. Street Performance Mufflers
feature unique, high flow internals, tuned to sound as cool as
they look. These mufflers boast performance you can feel,
comparable to Screamin’ Eagle II race-use mufflers. Chromeplated mufflers feature a new ballistic-shape inlet and are
street legal. Complement the unique inlet shape with matching shields (sold separately) that feature a deep embossed
“Screamin’ Eagle” signature script. Street legal on stock
displacement engines.
Fits ’07 FLSTF and FXSTD models equipped with shotgun
exhaust and ’08-’09 49-state FLSTF models with shotgun
exhaust. Installation requires separate purchase of
Muffler Clamps P/N 65296-95A (Qty. 2).
80496-07
80497-07
Slash Out.
Slash Down.
$299.95
$299.95
Fits 50-state ’10 FLSTF and FLSTFB models with shotgun
exhaust. Also fits ’08-later California FLSTF and
FLSTFB models with shotgun exhaust. Installation
requires separate purchase of Muffler Clamps
P/N 65296-95A (Qty. 2).
80680-08
Slash Down.
$374.95
Shown with:
SCREAMin’ EAglE® MUfflER ShiEldS –
ShotgUn
Styled to complement the ballistic inlet shape of the Screamin’
Eagle Street Performance Slip-On Mufflers. The rear shield
features a deep embossed “Screamin’ Eagle” signature script.
Kit includes chrome-plated front and rear shields and mounting hardware.
64806-07A
Fits ’07-later Screamin’ Eagle Street Performance
3-1/2" diameter mufflers.
$49.95
256
A. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on MUfflERS – SoftAil ShotgUn
(fAt Boy Shown), SlASh oUt (Shown with SCREAMin’ EAglE MUfflER ShiEldS)
A
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
25 6
A. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on MUfflERS – SoftAil ShotgUn
(fAt Boy Shown), SlASh down (Shown with SCREAMin’ EAglE MUfflER ShiEldS)
B
nEw
SCREAMIN’ EAGLE 485
®
Softail Exhaust
B. SCREAMin’ EAglE® StREEt pERfoRMAnCE
Slip-on ShotgUn MUfflERS – JEt BlACK
Street performance factory tuned mufflers in a tough black
finish. Mufflers feature high flowing internals to maximize
performance, and a rich, aggressive exhaust note that lets
everyone know you’re around. The heat-resistant jet black
Cermat coating stands up to abuse, and will not fade or blue.
These pipes are a “must” to get the blacked-out custom
look. Kit includes mufflers and jet-black muffler shields with
embossed Screamin’ Eagle logo. EPA stamped, these mufflers
are street legal on stock displacement engines.
80621-10
Slash Down.
$449.95
Fits ’07-later FLSTF, FLSTFB and FXSTD models equipped
with shotgun exhaust. Installation requires separate
purchase of Muffler Clamps P/N 65296-95A (Qty. 2).
Shown with:
SCREAMin’ EAglE JEt BlACK
ExhAUSt ShiEld Kit
Extend the blacked-out look along the bike’s entire profile.
These formed steel exhaust shields feature a unique jet black
ceramic coating that complements the jet black Screamin’
Eagle Street Performance Slip-On Mufflers. The black coating maintains its uniform black finish, and has survived stringent Harley-Davidson testing for durability and corrosion
resistance. Manufactured to Original Equipment standards for
exact fit, the easy-to-install kit includes front and rear head
pipe shields.
SCREAMin’ EAglE
80817-10
$189.95
Fits ’07-later FLSTF, FLSTFB and FXSTD models equipped
with shotgun exhaust.
2
B. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on ShotgUn MUfflERS – JEt BlACK
nEw
B
2
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
B. JEt BlACK ExhAUSt ShiEld Kit – fAt Boy
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
486
SCREAMIN’ EAGLE
®
Softail Exhaust
A
A. SCREAMin’ EAglE® StREEt pERfoRMAnCE
Slip-on MUfflERS – SoftAil® ShotgUn
Tough sound, nice performance. Street Performance Mufflers
feature unique, high flow internals, tuned to sound as cool as
they look. These mufflers boast performance you can feel,
comparable to Screamin’ Eagle II race-use mufflers. Chromeplated mufflers feature a new ballistic-shape inlet and are
street legal. Complement the unique inlet shape with matching shields (sold separately) that feature a deep embossed
“Screamin’ Eagle” signature script. Street legal on stock
displacement engines.
Fits ’07 FLSTN models with shotgun exhaust and
’08-’09 49-state FLSTN and FLSTSB models with
shotgun exhaust. Installation requires separate
purchase of Muffler Clamps P/N 65296-95A (Qty. 2).
80500-07
80501-07
Slash Out.
Slash Down.
$299.95
$299.95
Fits 50-state ’10 FLSTN and FLSTSB models with
shotgun exhaust. Also fits ’08-later California
FLSTN and FLSTSB models with shotgun exhaust.
Installation requires separate purchase of Muffler
Clamps P/N 65296-95A (Qty.2).
80681-08
Slash Down.
$374.95
Shown with:
SCREAMin’ EAglE® MUfflER ShiEldS –
ShotgUn
Styled to complement the ballistic inlet shape of the Screamin’
Eagle Street Performance Slip-On Mufflers. The rear shield
features a deep embossed “Screamin’ Eagle” signature script.
Kit includes chrome-plated front and rear shields and mounting hardware.
64806-07A
Fits ’07-later Screamin’ Eagle Street Performance
3-1/2" diameter mufflers.
$49.95
25
A. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on MUfflERS –
SoftAil dElUxE Shown, SlASh down
(Shown with SCREAMin’ EAglE MUfflER ShiEldS)
A
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
25
A. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on MUfflERS –
SoftAil dElUxE Shown, SlASh oUt
(Shown with SCREAMin’ EAglE MUfflER ShiEldS)
B
nEw
SCREAMIN’ EAGLE 487
®
Softail Exhaust
B. SCREAMin’ EAglE® StREEt pERfoRMAnCE
Slip-on ShotgUn MUfflERS – JEt BlACK
Street performance factory tuned mufflers in a tough black
finish. Mufflers feature high flowing internals to maximize
performance, and a rich, aggressive exhaust note that lets
everyone know you’re around. The heat-resistant jet black
Cermat coating stands up to abuse, and will not fade or blue.
These pipes are a “must” to get the blacked-out custom
look. Kit includes mufflers and jet-black muffler shields with
embossed Screamin’ Eagle logo. EPA stamped, these mufflers
are street legal on stock displacement engines.
80781-10
Slash Down.
$449.95
Fits ’07-later FLSTN and FLSTSB models with shotgun
exhaust. Installation requires separate purchase of Muffler
Clamps P/N 65296-95A (Qty. 2).
Shown with:
SCREAMin’ EAglE JEt BlACK
ExhAUSt ShiEld Kit
Extend the blacked-out look along the bike’s entire profile.
These formed steel exhaust shields feature a unique jet black
ceramic coating that complements the jet black Screamin’
Eagle Street Performance Slip-On Mufflers. The black coating maintains its uniform black finish, and has survived stringent Harley-Davidson testing for durability and corrosion
resistance. Manufactured to Original Equipment standards for
exact fit, the easy-to-install kit includes front and rear head
pipe shields.
80829-10
$189.95
Fits ’07-later FLSTSB and FLSTN models equipped with
shotgun exhaust.
C. hARlEy-dAvidSon® SoftAil® Slip-on
MUfflERS – ShotgUn
These 49-state legal mufflers allow you to have an exhaust
system with classic Slash Down ends while maintaining
street legal sound level. Features “Harley-Davidson” script on
upper muffler. (Not legal for sale or use on California catalystequipped vehicles.)
Fits ’05 FLSTN models.
Slash Down.
$254.95
SCREAMin’ EAglE
80460-05
5
B. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on ShotgUn MUfflERS – JEt BlACK
C
5
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
C. hARlEy-dAvidSon SoftAil Slip-on MUfflERS – ShotgUn, SlASh down (fAt Boy Shown)
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
488
SCREAMIN’ EAGLE
®
Touring Exhaust
A
A. SCREAMin’ EAglE® StREEt pERfoRMAnCE
Slip-on MUfflERS – onE piECE
Street Performance Touring Mufflers combine aggressive
sound quality with aggressive performance results. High flow
internal design produces performance you can feel, comparable to Screamin’ Eagle II race-use mufflers. Street legal, these
chrome-plated mufflers feature a new ballistic-shape inlet and
a deep embossed “Screamin’ Eagle” signature script. Street
legal on stock displacement engines.
Fits 50-state ’09-later Touring and Trike models (except
FLHTCUSE, FLTRSE, FLHXSE and ’10 FLHX and FLTRX).
Installation requires separate purchase of Muffler
Clamps P/N 65296-95A (Qty. 2).
80721-09
Slash Down.
$369.95
Fits ’07 Touring models and ’08 49-state Touring models
(except ’07-’08 FLHTCUSE and FLHRSE). Installation
requires separate purchase of Muffler
Clamps P/N 65296-95A (Qty. 2).
80490-07
80491-07
Slash Out.
Slash Down.
$369.95
$369.95
Fits ’08 California Touring models (except
’08 FLHTCUSE and FLHRSE). Installation requires
separate purchase of Muffler Clamps
P/N 65296-95A (Qty. 2).
80677-08
Slash Down.
25 6
A. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on MUfflERS – onE piECE, SlASh down
$419.95
B. SCREAMin’ EAglE® StREEt pERfoRMAnCE
BlACK onE piECE Slip-on MUfflERS
Experience the dark side. Street Performance one piece touring mufflers now available in black. Features an aggressive
exhaust note, high flowing internals to maximize performance,
and a unique black ceramic coating, unmatched for durability. Mufflers also feature ballistic inlet shape and embossed
Screamin’ Eagle script logo.
80742-09
Slash Down.
$369.95
Fits 50-state ’09-later Touring and Trike models (except
FLHTCUSE, FLTRSE, FLHXSE and ’10 FLHX and FLTRX).
Installation requires separate purchase of Muffler Clamps
P/N 65296-95A (Qty. 2).
A
25 6
A. SCREAMin’ EAglE StREEt pERfoRMAnCE Slip-on MUfflERS – onE piECE, SlASh oUt
B
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
2
B. SCREAMin’ EAglE StREEt pERfoRMAnCE BlACK onE piECE Slip-on MUfflERS
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
nEw
C
SCREAMIN’ EAGLE 489
®
Touring Exhaust
SCREAMin’ EAglE® diffUSion diSC
Slip-on MUfflERS
Tuned by the factory for the ultimate combination of improved
performance, rich tone and legal sound levels, these 50-state
street legal slip-on mufflers are the perfect match for your
Touring motorcycle. The high-flow design of the external diffusion discs produces plenty of low-end “guts” for getting your
fully-loaded bike away from the light, and a fat torque curve
that gets you quickly around a slow-moving RV. These long and
lean mirror-chrome mufflers feature an embossed Screamin’
Eagle logo, and are flared to an aggressive 4” opening at the
rear. The multiple stainless steel diffusion disks are capped
with a blacked-out ring and stainless hardware for a classic
finishing touch. These slip-on mufflers are easy to install, and
are available to fit both 2-into-1 and traditional 2-into-2 Touring
model exhaust configurations. Mufflers are EPA stamped.
2
C. SCREAMin’ EAglE nightStiCK 2-into-1 Slip-on MUfflER
nEw
d
C. SCREAMin’ EAglE nightStiCK 2-into-1
Slip-on MUfflER
Maximize the performance of your 2-into-1 exhaust-equipped
2010 Street Glide or Road Glide model. Designed for easy
installation on the Original Equipment header pipe and muffler
hanger, this long and lean muffler provides the right combination of air flow and back pressure to boost the performance
and sound quality of your bike. EPA stamped, this muffler is
50-state street-legal on stock displacement engines.
80881-10
$249.95
Fits 50-state ’10 FLHX and FLTRX models with Original
Equipment 2-into-1 exhaust. Installation requires separate
purchase of Muffler Clamp P/N 65296-95A.
80847-10
$429.95
Fits 50-state ’10 Touring and Trike models with dual exhaust
(except FLHTCUSE, FLHXSE and ’10 FLHX and FLTRX).
Also fits ’09 California Touring and Trike models (except
FLHTCUSE and FLTRSE). Installation requires separate
purchase of Muffler Clamps P/N 65296-95A (Qty. 2).
d. SCREAMin’ EAglE fAtShotz 2-into-2 Slip-on MUfflERS
nEw
E
130
130
120
120
110
110
100
100
90
90
80
80
70
70
60
60
50
50
Stock 96CI TQ
Stock 96CI HP
SE FatShotz/Stage 1 TQ
SE FatShotz/Stage 1 HP
40
30
40
30
20
Corrected Rear Wheel Horsepower (hp)
62
Corrected Rear Wheel Torque (lb-ft)
fAtShotz 2-into-1 MUfflER pERfoRMAnCE
(P/N 80847-10 shown)
20
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
Engine Speed (rpm x 1000)
E. SCREAMin’ EAglE JEt BlACK ExhAUSt
ShiEld Kit – toURing
Extend the blacked-out look along the bike’s entire profile.
These formed steel exhaust shields feature a unique jet
black ceramic coating that complements the jet black
Screamin’ Eagle Street Performance Slip-On Mufflers
P/N 80742-09. The jet black coating maintains its uniform
black finish, and has survived stringent Harley-Davidson testing for durability and corrosion resistance. Manufactured to
Original Equipment standards for exacting fit, the easy-toinstall kit includes front and rear head pipe shields.
2
E. SCREAMin’ EAglE JEt BlACK ExhAUSt ShiEld Kit – toURing
64981-09
$249.95
Fits ’09-later Touring models (except ’10 FLHX and FLTRX).
Also fits ’09-later Trike models.
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
SCREAMin’ EAglE
d. SCREAMin’ EAglE fAtShotz 2-into-2
Slip-on MUfflERS
Provide a performance and style boost to your 2-into-2
exhaust-equipped Touring motorcycle. Designed for easy
installation on the Original Equipment header pipes and
muffler hangers, these mirror-chrome flared mufflers are
tuned to maximize air flow while keeping the rich exhaust
note within the legal limits. EPA stamped, these mufflers are
50-state street-legal on stock displacement engines.
490
SCREAMIN’ EAGLE
®
Touring Exhaust
A
A. SCREAMin’ EAglE® StREEt pERfoRMAnCE
toURing MUfflERS
We tuned these mufflers to provide an exhaust note with some
muscle, maintained the awesome performance, and kept flexible end cap style. The Screamin’ Eagle® Street Performance
exhaust system combines a large internal volume with
re-tuned baffles to strike the perfect balance required to
deliver usable performance. The large 4" diameter cans
provide the additional internal volume necessary for high flow
of exhaust gases with just the right amount of back pressure.
A large selection of end cap designs are available (sold separately) to provide the finishing touch. The final result – great
sound, great performance, and your own style.
80732-09
$389.95
Fits 50-state ’09-later Touring models (except FLHTCUSE,
FLTRSE, FLHXSE and ’10 FLHX and FLTRX). Installation
requires separate purchase of Muffler Clamps
P/N 65296-95A (Qty. 2). Requires separate purchase
of two End Caps.
64985-07A
$389.95
Fits ’07 Touring models and ’08 49-state Touring models
(except ’07-’08 FLHTCUSE and FLHRSE). Installation
requires separate purchase of Muffler Clamps
P/N 65296-95A (Qty. 2). Requires separate purchase
of two End Caps.
B. toURing MUfflER ShiEld Kit
These chrome-plated muffler shields extend the Original
Equipment exhaust pipe shield to the end of the muffler and
will not interfere with end caps. They are perfect for restoring the luster to your Performance Mufflers by covering any
scratches or weathering. Kit includes two exhaust shields and
related hardware.
25
A. SCREAMin’ EAglE StREEt pERfoRMAnCE toURing MUfflERS –
Shown with REvolvER End CApS
B
65829-00
$134.95
Fits Harley-Davidson® 3-1/2" Touring Mufflers,
Screamin’ Eagle Performance Mufflers, and
Harley-Davidson Performance Mufflers. These shields
are not intended for use on FLSTS models or on
One-Piece Performance Mufflers.
C. CUStoM ExhAUSt ShiEld
Complete the flow of brilliant chrome from the front to the rear
of the Touring exhaust system. Chrome Front Exhaust Shield
replaces the Original Equipment front shield and covers the
exposed exhaust pipe adjacent to the rider footboard. Easyto-install, the shield mounts with existing hardware.
65694-05A
Fits ’00-’08 Touring models. Original Equipment
on ’05 FLHTCSE/2 models.
$99.62
d. SCREAMin’ EAglE pERfoRMAnCE
ExhAUSt gASKEt Kit
The exhaust gasket is a flat-woven stainless steel design that
does not compress into the exhaust port, improving flow out
of the head into the exhaust header pipe.
2
B. toURing MUfflER ShiEld Kit
17048-98
$7.95
Fits Evolution 1340-equipped models, XL, XR and ’99-later
Twin Cam-equipped models (except Trike). (pair)
C
NOTE: There is no warranty on exhaust pipes and mufflers
with regard to any discoloration. Blueing is caused by tuning
characteristics, cam timing, carburetor jetting, over-heating,
etc. and is not caused by defective manufacturing.
d
2
2
C. CUStoM ExhAUSt ShiEld
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
d. SCREAMin’ EAglE pERfoRMAnCE
ExhAUSt gASKEt Kit
E
E
SCREAMIN’ EAGLE 491
®
Touring Exhaust
E. 4" ChRoME End CApS
Sold individually.
Fits ’07-later Touring models equipped with 4" Street
Performance Touring Muffler Kit P/N 64985-07A and
80732-09.
80622-07
80618-07
80623-07
80619-07
80616-07A
E. 4" ChRoME End CApS –
SlASh Up/down/oUt
$39.95
$39.95
$64.95
$39.95
$55.95
f. SCREAMin’ EAglE® 4" End CApS –
BlACK And ChRoME BlUnt REvolvER
These stylish Revolver End Caps feature a black outer shell
with chrome inner dimples that will make you stand out in the
crowd. The two-piece design allows removal of outer black
shell for cleaning the inner chrome surface.
E. 4" ChRoME End CApS –
piSton
E
Slash Up/Down/Out.
Piston.
Billet Tapered Slash.
Revolver.
Fishtail.
E
80611-09
Fits Screamin’ Eagle Street Performance Touring
End Cap Muffler P/N 64985-07A and 80732-09.
$109.95
g. ChRoME MUfflER BRACKEt CovER Kit
Brilliant stamped-steel cover conceals the Original Equipment
exhaust brackets. Contoured for a custom fit, these easy-toinstall mirror-chrome covers add a distinctive finishing touch
(sold in pairs).
80716-08
$59.95
Fits ’97-later Touring models (except Trike). Fits Screamin’
Eagle Street Performance Touring 4" Mufflers P/N 64985-07A
and 80732-09. Does not fit with Fishtail 4" Muffler End Cap
P/N 80616-07. Does not fit with Screamin’ Eagle 3-1/2"
Mufflers P/Ns 80490-07, 80491-07, 80677-08, 65467-05,
80463-06, or 65259-00.
E. 4" ChRoME End CApS –
BillEt tApEREd SlASh
E. 4" ChRoME End CApS –
REvolvER
f
SCREAMin’ EAglE
E
E. 4" ChRoME End CApS –
fiShtAil
f. SCREAMin’ EAglE 4" End CApS –
BlACK And ChRoME BlUnt REvolvER
g
g. ChRoME MUfflER BRACKEt CovER Kit
g
g. ChRoME MUfflER BRACKEt CovER Kit
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
GMA10_466.492.513.indd 492
6/30/09 4:57 PM
A
SCREAMIN’ EAGLE 493
®
Engine Components
A. SCREAMin’ EAglE® hydRAUliC CAM ChAin
tEnSionER plAtE UpgRAdE Kit
This kit updates the cam chain tensioner of your Twin Cam 88
engine to the latest design, as featured on the Twin Cam 96®
engine. The billet cam support plate has been designed to
allow the installation of the Twin Cam 96 hydraulic cam chain
tensioner to Twin Cam 88-equipped models. These Hydraulic
Cam Chain Tensioners will significantly outlast the spring
loaded tensioners, and are an ideal addition to an engine modified for improved performance. In addition, ’02-’06 models
utilize a Twin Cam 96 single row front roller chain and sprocket
(included in kit). ’99-’01 models use Original Equipment front
silent chain and sprocket to retain the cam position sensor
function. The kit includes the improved Twin Cam 96 oil pump
that increases flow by 8% and scavenging by 22% to enhance
other performance upgrades.
25284-08
$429.95
Fits ’99-’05 Dyna® models, ’99-06 Touring models, and
®
’00-’06 Softail models. Installation requires separate
purchase of Spacer Kit P/N 25285-08.
Also available:
SCREAMin’ EAglE CAM ChAin
tEnSionER SpACER Kit
Specifically designed for Hydraulic Cam Chain Tensioner
Upgrade Kit P/N 25284-08. Kit includes an assortment of
six different spacers. Spacers are required to space the cam
sprocket to correct alignment with the mating pinion chain
sprocket.
inset photo:
SCREAMin’ EAglE® BillEt CAM SUppoRt plAtE
A great upgrade for any performance motor. The Billet Cam
Support Plate is manufactured from billet aluminum with
pressed-in bronze bushings, and is pre-assembled with the
crankshaft bushing and oil pressure relief valve. Aluminum
is specified at 6061 billet plate, heat treated to T6 specifications with a surface-hardened anodized finish to provide
superior strength, rigidity, and durability. CNC-precision
machining ensures precise dimensions and constant material thickness across the plate, enabling perfect alignment of
cams and chains. Cam bushings are made from 660 bronze
material to provide enhanced wear resistance, and to stand
up to increased loads from the high lift cams common in large
displacement motors.
25282-07
$329.95
Fits ’06-later Dyna and ’07-later Softail and Touring models.
2
A. SCREAMin’ EAglE hydRAUliC CAM ChAin tEnSionER plAtE UpgRAdE Kit
B
C
B. SCREAMin’ EAglE lEfty BEARing
When high performance engine modifications are made, the
increased torque is transferred via the crankshaft to the drive
system, putting a significantly higher load on the bearing. The
Lefty Bearing is designed to provide increased load capacity
and enhanced durability in high-torque applications. The bearing is installed in the left side of the crank case, and supports
the output shaft to the primary drive system.
24004-03A
Fits ’03-later Twin Cam-equipped models.
$39.95
C. SCREAMin’ EAglE tiMKEn BEARing SlEEvE
Convert a 2003-later Twin Cam model with a factory-installed
roller bearing to a Timken tapered bearing. When used with
Screamin’ Eagle Timken Bearing Tool P/N 34823-08 (sold
separately), the Bearing Sleeve can be installed without precision machining. Sleeve accepts press-in Timken bearing (sold
separately).
34822-08
$120.95
Fits ’03-later Twin Cam-equipped models. Installation
requires separate purchase of model-specific Sprocket
Spacer. ’03-’05 Dyna® use P/N 24038-99A, ’03-’06 Softail®
use P/N 24039-01A, ’03-06 Touring use P/N 24008-99, and
’06-later Dyna, ’07-later Softail and ’07-later Touring models
use P/N 11887.
2
B. SCREAMin’ EAglE lEfty BEARing
C. SCREAMin’ EAglE tiMKEn BEARing SlEEvE
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
SCREAMin’ EAglE
25285-08
$17.95
Required for installation of Screamin’ Eagle Hydraulic Cam
Chain Tensioner Upgrade Kit P/N 25284-08.
494
SCREAMIN’ EAGLE
®
Engine Components
A
B
A. SCREAMin’ EAglE® tAppEtS
These Screamin’ Eagle Tappets incorporate a unique axle,
roller and bearing design that increases durability and stability of the tappets. Works well in high horsepower/high RPM
applications.
18572-07
$269.95
Fits ’99-later Twin Cam-equipped models and ’00-later XL
and XR models.
18568-98
$259.95
Fits ’84-’99 Evolution® 1340-equipped models,
and ’86-’90 XL models. (set of 4)
B. SCREAMin’ EAglE pERfoRMAnCE
vAlvE SpRing Kit*
This performance Beehive-shaped Valve Spring Kit will permit
the Sportster engine to rev to 7000 RPM. The unique ovate
wire yields increased performance from a compact spring
design. The installed spring pressure is increased to 208 lbs,
and allows a maximum lift of .575". Complete kit includes
springs, upper collars and keepers, and lower collars with integral valve seals.
2
18013-03A
$149.95
Fits ’04-later XL, XR and ’05-later Twin Cam-equipped
models. Does not fit Screamin’ Eagle Performance Heads
with 5/16" diameter valves.
C. SCREAMin’ EAglE twin CAM foRgEd
RoCKER SUppoRtS
Increased strength rocker supports will handle the increased
loads from higher lift cams and higher RPM applications. This
product keeps valve train geometry solid. Works with stock or
roller rocker arms. Includes required hardware for installation.
17675-01B
Fits ’99-later Twin Cam-equipped models.
2
A. SCREAMin’ EAglE tAppEtS
C
B. SCREAMin’ EAglE pERfoRMAnCE
vAlvE SpRing Kit
d
$154.95
d. SCREAMin’ EAglE RollER
RoCKER ARMS
Unique roller-tip design increases strength and reduces valve
stem side-loading and tip friction. Built to handle cams with
up to .700" lift in high RPM application. Complete kit includes
set of four.
17378-98
$469.95
Fits ’84-’99 Evolution 1340-equipped models, ’86-later
XL and XR models and ’99-later Twin Cam-equipped models.
(Modification is required on Twin Cam rocker covers.)
E. SCREAMin’ EAglE® pREMiUM tApEREd
QUiCK-inStAll AdJUStABlE pUShRodS
These premium pushrods are tapered for enhanced clearance
at the cylinder head, allowing the use of higher lift cams. The
one-piece chrome moly tube adds rigidity and durability, and
the threaded adjustment feature provides easy cam installation without removing the cylinder heads or rocker boxes.
To simplify adjustment, the tube features six flats, with one
flat marked with a large dot for tracking the adjustment. The
threaded rod features 4 flats to reduce wrench swing. Each
pushrod features the Screamin’ Eagle logo and is marked for
“Intake” or “Exhaust”. Kit includes 4 pushrods and required
pushrod tubes.
18404-08
Fits ’99-later Twin Cam-equipped models.
$164.95
2
C. SCREAMin’ EAglE twin CAM foRgEd
RoCKER SUppoRtS
E
2
d. SCREAMin’ EAglE RollER RoCKER ARMS
f
f. SCREAMin’ EAglE QUiCK-inStAll pUShRod Kit
foR twin CAM-EQUippEd ModElS
These pushrods have been designed to allow for easier installation, adjustment, and improved durability. This unique
Screamin’ Eagle design allows for installation of camshafts
in the Twin Cam without the removal of the heads or rocker
boxes. This design is also a great performer, constructed of
stiff chrome moly tubing and thread-rolled adjusters. Kit
includes required pushrod tubes and clips for adjustment of
pushrods.
17997-99A
Fits ’99-later Twin Cam-equipped models.
$146.95
*CAUtion: Proper valve spring to rocker cover clearance must
always be verified during installation of Screamin’ Eagle Valve
Spring Kits. Failure to have adequate clearance may result in
engine damage.
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
2
E. SCREAMin’ EAglE pREMiUM tApEREd
QUiCK-inStAll AdJUStABlE pUShRodS
2
f. SCREAMin’ EAglE QUiCK-inStAll pUShRod
Kit foR twin CAM-EQUippEd ModElS
G
H
SCREAMIN’ EAGLE 495
®
Engine Components
G.Automatic Compression Release
Automatic Compression Release (ACR) valves reduce the
strain of starting your high performance motor by reducing
cylinder compression – automatically! The engine is easier to
turn over, resulting in less wear on your starter and battery.
After start, the ACR valves close to restore full compression.
ACR gives you peace of mind and protects your investment.
ACR can be installed on stock or Screamin’ Eagle Performance
cylinder heads for all ’07-later Twin Cam-equipped models.
Installation requires machining to be performed by a
competent machinist using the Screamin’ Eagle Automatic
Compression Release Fixture Kit P/N 94648-08 (sold separately). Installation requires separate purchase of modelspecific ACR Wiring Harness P/N 70623-06 or 70623-08.
28861-07A $34.95
Fits ’07-later Twin Cam-equipped models. Can be
used with Original Equipment or Screamin’ Eagle
Cylinder Heads. (each)
2
2
G. Automatic Compression Release
H. Screamin’ Eagle Big Bore
High Performance Head Gasket Kit
I
Also available:
Screamin’ Eagle® Automatic Compression
Release Wiring Harness
70623-06
$59.95
Fits ’07-later Dyna and Softail models and ’07 Touring
models equipped with Automatic Compression
Release Cylinder Heads.
70623-08
$49.95
Fits ’08-later Touring models equipped with Automatic
Compression Release Cylinder Heads (except ’10 FLHTCU,
FLHTK, FLHXXX, and ’09-’10 FLHTCUTG).
I. Screamin’ Eagle CV
Carburetor Top Cover
This great looking carb top adds a finishing touch to the
Original Equipment or Screamin’ Eagle 44mm CV carburetor. The die-cast top features a brilliant chrome finish and
“Screamin’ Eagle” diamond engraving for clean crisp detail.
27477-04
$26.95
Fits carbureted models equipped with Original Equipment or
Screamin’ Eagle Big Bore 44mm CV carburetor.
2
I. Screamin’ Eagle CV Carburetor Top Cover
J.High Performance Clutch Discs and
Spring for ’89-earlier Models
Offers increased clutch capacity. Reduces clutch slippage and
resultant heat build-up under heavy use/high performance
engines.
J
K
1
$23.95
High Performance Clutch Spring
36783-87
Fits ’84-1/2-’90 XL alternator models. $23.95
2
1. Screamin’ Eagle Clutch Spring
37875-86A Fits ’84-1/2-’89 1340cc wet clutch models.
2. Screamin’ Eagle Clutch Discs
37931-84
$90.00
Fits ’82-1/2-’89 1340cc wet clutch models. Stock production
on ’87-’89 models. Set of six.
K.Screamin’ Eagle
Performance Clutch Kit
Performance clutch kit converts the 8-plate clutch to a 9-plate
design. The surface area is increased by 13%, and the spring
rate is increased by 10% for a combination that can handle
over 115 lb-ft of torque at the crank, a 23% increase over the
stock-rated capacity. Kit includes Kevlar-based friction discs
and performance clutch spring.
38002-04
$199.95
Fits ’91-later XL, XR models and ’94-’97 Evolution®
1340-equipped models.
2
J. High Performance Clutch Discs and
Spring for ’89-earlier Models
2
K. Screamin’ Eagle Performance
Clutch Kit
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
SCREAMin’ Eagle
H.Screamin’ Eagle Big Bore High
Performance Head Gasket Kit
This multi-layered head gasket provides improved sealing for
3-7/8" Big Bore high performance engines. Sold in pairs. For
engines with compression ratios above 10.0:1, Screamin’ Eagle
High Tensile Cylinder Studs P/N 16505-01 are required.
16101-01
$44.95
Fits ’99-later Big Bore Twin Cam-equipped models.
496
SCREAMIN’ EAGLE
®
Clutch Components
A
A. SCREAMin’ EAglE® twin CAM
pERfoRMAnCE RACE ClUtCh hUB Kit
Innovative new clutch hub kit offers improved clutch performance, and is perfect for large displacement applications.
Will support engines producing up to 160 lb-ft of torque. Kit
includes the hub, pressure plate and clutch springs, and can
be used with stock friction discs and spacers or Screamin’
Eagle Friction Disc Kit P/N 37980-10. (Does not include clutch
friction plates.)
37976-08
$249.95
Fits ’07-later Twin Cam-equipped models. Does not fit
models equipped with Hydraulic Clutch.
B. SCREAMin’ EAglE® RACE ClUtCh Kit
This clutch has an innovative design that features new long
life friction plates and 6 individual coil springs to adjust
your clutch to your specific needs. Designed to handle up to
160 lb-ft of torque at the crank.
37970-03A
$384.95
Fits ’90-’99 Evolution® 1340-equipped models and
®
®
’99-’06 Softail , Touring and ’99-’05 Dyna models. (Will not
fit models equipped with Hydraulic Clutch.)
2
NOTE: ’90-’97 Evolution 1340-equipped models require
Clutch Shell P/N 37707-98A and Rod Adjuster Screw
P/N 37090-98A. ’90-’93 Evolution 1340-equipped models
also require starter P/N 31553-94B.
C. SCREAMin’ EAglE pERfoRMAnCE
ClUtCh fRiCtion diSC Kit
Newly-developed friction material delivers longer life than
Original Equipment friction discs. Kit includes new precisionmachined flat steel plates. This Friction Disc Kit is a perfect
match for the Screamin’ Eagle Twin Cam Performance Race
Clutch Hub Kit P/N 37976-08.
A. SCREAMin’ EAglE twin CAM pERfoRMAnCE RACE ClUtCh hUB Kit
B
C
nEw
37980-10
$169.95
Fits ’99-later Twin Cam-equipped model and ’98-later
Evolution-equipped models.
heavy duty Clutch Spring for Stock Clutch (not shown)
37951-98
$29.95
Fits ’99-later Twin Cam-equipped models and
’98-later Evolution 1340-equipped models.
d. SCREAMin’ EAglE Big twin CoMpEnSAtoR
This premium compensator has been engineered with heavier
springs and increased travel to support the high-torque output
associated with high compression race and large displacement engines. Designed to support up to 7 times the energy
absorption capacity of the Original Equipment compensator, this unit helps protect the engine and driveline components during harsh drag race launches. The perfect addition
to a complete performance upgrade, and it complements the
installation of the Screamin’ Eagle Performance Clutch Hub
P/N 37976-08.
40274-08
$249.95
Fits ’06-later Dyna, ’07-later Softail (except FXCW, FXCWC
and FXSTSSE3), and ’07-later Touring models. Original
Equipment on Trike models. Installation on ’06 Dyna models
requires separate purchase of ’07-style stator.
E. SCREAMin’ EAglE pERfoRMAnCE
SlippER ClUtCh foR vRSC ModElS
This clutch offers reduced lever effort and improved performance. The unique “slip and assist” ramp system opens the
two halves of the clutch hubs slightly during high loads to the
drivetrain, allowing a moderate slip that reduces shock to the
drivetrain during rapid downshifting. The resulting reduction
in wheel hop allows maximum contact between the tire and
the road in wet or slippery conditions. Clutch lever effort is also
reduced by 20% in 1130cc and 30% on 1250cc applications.
37938-08KA
Fits ’02-’07 VRSC models.
2
B. SCREAMin’ EAglE RACE ClUtCh Kit
d
2
C. SCREAMin’ EAglE
pERfoRMAnCE ClUtCh fRiCtion diSC Kit
E
$239.95
2
d. SCREAMin’ EAglE Big twin CoMpEnSAtoR
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
2
E. SCREAMin’ EAglE pERfoRMAnCE SlippER
ClUtCh foR vRSC ModElS
f
SCREAMIN’ EAGLE 497
®
Transmission
f. SCREAMin’ EAglE® 6-SpEEd
tRAnSMiSSion And gEAR SEt
Designed from the ground up, the Screamin’ Eagle transmission incorporates many of the best Original Equipment
features, like late-style shifting mechanism and a newly
designed “shift ring” system to make this the smoothest shifting Harley-Davidson® transmission available. The “shift ring”
system is similar to the system used in the VRSC transmission, and it slides on the shafts to mate into the gears. This
eliminates sliding heavy gears to accomplish the shift, and
results in smooth, precise and light effort shifting. Sixth gear
is a true overdrive, at a .89:1 ratio, and the first five gears mimic
today’s proven 5-speed ratios. The overdrive feature allows
you to run a lower engine RPM in sixth gear, at any given road
speed. Lower RPM can result in lower vibration, longer engine
life and smoother cruising. The Screamin’ Eagle 6-Speed
Transmission is available as a complete transmission, or as a
replacement gear set, and can be matched with hydraulic or
cable-operated clutch controls.
Screamin’ Eagle 6-Speed Transmissions feature forged
chrome “trap door”, forged shifter forks and forged and
precisely ground gears. No speedometer or exhaust mount
modifications are required. Complete transmissions are ready
to install into the chassis, and the 6-Speed Gear Set Kits are
designed to replace the stock gear set without removing
the transmission. Gear Set Kits require slight modification
(template included) to the Original Equipment transmission
case, and include all necessary installation hardware.
CoMplEtE tRAnSMiSSion
Fits ’01-’05 Dyna® models. Requires separate purchase of
appropriate Side Cover Release Kit.
33034-03A Silver and Chrome.
$2,799.95
33040-03A Black and Chrome.
$2,799.95
Fits ’00-’06 Softail® models. Requires separate purchase of
appropriate Side Cover Release Kit.
33044-03A
33045-03A
Silver and Chrome.
Black and Chrome.
$2,799.95
$2,799.95
Fits ’90-’99 Softail models. Includes Cable Side Cover
Release Kit.
Silver and Chrome.
Black and Chrome.
$2,799.95
$2,799.95
Fits ’02-’06 Touring models. Requires separate purchase of
appropriate Side Cover Release Kit.
33136-04
33137-04
Silver and Chrome.
Black and Chrome.
$2,799.95
$2,799.95
gEAR SEt
33100-03A
$2,099.95
Fits ’90-’99 Softail models and ’91-’94 and ’96-’00 Dyna
models. Requires separate purchase of appropriate
Side Cover Release Kit.
33101-03A
$2,099.95
Fits ’90-’00 Touring models. Requires separate purchase of
appropriate Side Cover Release Kit.
33102-03A
$2,099.95
Fits ’00-’06 Softail and ’01-later Touring models. Requires
separate purchase of appropriate Side Cover Release Kit.
33103-03A
$2,099.95
Fits ’01-’05 Dyna models. Requires separate purchase of
appropriate Side Cover Release Kit.
The Screamin’ Eagle 6 Speed Transmission has been tested and validated using the
same rigorous procedures that Original Equipment transmissions are subjected to, and
is backed by a 12 or 24 month (depending on model year), unlimited mileage warranty
when installed at the time of a new bike purchase.
2
f. SCREAMin’ EAglE 6-SpEEd tRAnSMiSSion And gEAR SEt
(Shown with SCREAMin’ EAglE tRAnSMiSSion SidE CovER foR 6-SpEEd tRAnSMiSSion)
Shown with:
SCREAMin’ EAglE® tRAnSMiSSion SidE CovER
foR 6-SpEEd tRAnSMiSSion
Includes unique side cover and clutch components required
for installing a Screamin’ Eagle 6-Speed Transmission.
38753-04A Hydraulic Clutch.
$299.95
Fits ’99-’06 Touring, ’99-’05 Dyna®, and ’00-’06 Softail®
models equipped with Screamin’ Eagle 6-Speed
Transmission and Hydraulic Clutch. NOTE: If installing a
Hydraulic Clutch on a previously installed Screamin’ Eagle
6-Speed, separate purchase of the Clutch Release Cover
Gasket P/N 35148-03 is required.
38752-04
Cable Clutch.
$199.95
Fits ’90-’06 Touring, ’91-’05 Dyna, and ’90-’06 Softail models
equipped with Screamin’ Eagle 6-Speed Transmission and
cable-actuated clutch.
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
SCREAMin’ EAglE
33105-03
33104-03
498
SCREAMIN’ EAGLE
®
Ignition
A
nEw
A. SCREAMin’ EAglE® St
pERfoRMAnCE SpARK plUg
Screamin’ Eagle ST Spark Plugs feature double platinum
coating for superior erosion resistance and extended life.
The “V” trimmed ground electrode reduces shrouding of the
flame front to promote flame propagation, and the fine wire
center electrode enhances start ups and ignitability. Screamin’
Eagle ST Plugs feature Ribbed Core Technology (RCT) that
provides resistance to fouling, and are designed with Original
Equipment-style noise suppression to prevent electrical interference with radios and CB communication equipment. Works
great in racing applications where rich air/fuel conditions are
required. Unique style with Screamin’ Eagle logo.
high Compression Applications
These plugs are designed for high performance applications
involving modifications in high flow air cleaners, cam shafts,
exhaust, performance heads, ignition components, higher
compression ratios above Original Equipment configurations
or engines specific for racing applications.
32186-10
$15.95
Fits ’99-later Twin Cam-equipped models, ’86-later XL and
XR models, and 1340 Evolution models equipped with
Screamin’ Eagle Performance Cylinder Heads.
32188-10
$15.95
Fits ’84-’99 Evolution 1340-equipped models, ’75-’81
Shovelhead 74 and 80ci, and ’83-’84 XR1000 models.
Stock Compression Applications
Designed for modified engines including performance carburetors, high-flow air cleaners, cam shafts, exhaust systems
and ignition systems in conjunction with stock compression
ratios.
32187-10
Fits ’72-’85 XL1000 (except XR1000). $15.95
32189-10
$15.95
Fits ’84-’99 Evolution® 1340-equipped models,
’75-’81 Shovelhead 74 and 80ci models.
32192-10
$15.95
Fits ’99-later Twin Cam-equipped models, and ' 86-later
Evolution Sportster® 883, 1100 and 1200 models.
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
2
A. SCREAMin’ EAglE St pERfoRMAnCE SpARK plUg
terminal construction ensures solid
watertight connection with standard or
performance spark plug wires.
plated jacket helps prevent
corrosion in harsh weather and
temperature conditions.
Built-in suppressor/resistor reduces
radio noise and interference.
RCt (Ribbed Core technology) provides improved
resistance to plug fouling. The rib’s proximity promotes
spark discharge to the shell on plugs that are starting to
foul, allowing the air/fuel charge in the cylinder to
ignite and clear the plug.
“v-trimmed” ground electrode
reduces shrouding to promote
flame propagation.
fine wire Center Electrode promotes
ignitability and enhances start up.
platinum pads on both electrodes reduce
gap erosion for longer plug life.
B
SCREAMIN’ EAGLE 499
®
Ignition
B.Screamin’ Eagle® 10mm
Phat Spark Plug Wires
Fat 10mm plug wires add dimension and style to your ride.
Screamin’ Eagle boot design and suppression core wires
ensure solid connection and maximum voltage transfer
between coil and plugs. “Screamin’ Eagle” logo printed along
wire to add style.
Multi-Fit.
32095-98A
31987-85B
Black.
Yellow.
$19.95
$19.95
Fits ’09-later Touring models.
32303-08
32318-08
32325-08
Black.
Red.
Orange.
$19.95
$19.95
$19.95
Fits ’99-’08 Touring models.
31932-99B
31939-99B
31946-99B
Black.
Red.
Orange.
$19.95
$19.95
$19.95
Fits ’99-’09 Dyna® models.
31930-99B
31937-99B
31944-99B
Black.
Red.
Orange.
$19.95
$19.95
$19.95
Fits ’00-later Softail® models (except FXCW/FXCWC).
31907-08
Black.
32359-00B Red.
32360-00B Orange.
$19.95
$19.95
$19.95
Fits ’08-later FXCW and FXCWC models.
31965-08
31967-08
Black. Red. $19.95
$19.95
Fits ’91-’98 Dyna, ’85-’99 Softail and’80-’84 Touring models.
32093-98A
31964-89B
Black.
Orange.
$19.95
$19.95
Fits ’07-later XL models.
Black. Orange.
$19.95
$19.95
Fits ’04-’06 XL models.
31958-04A
31956-04A
Black. Orange.
$19.95
$19.95
Fits ’86-’03 XL models.
2
X
Black. Orange.
$19.95
$19.95
C.Screamin’ Eagle Performance Coils –
Evolution® Engines
These coils provide over 40,000 volts to powerfully spark
your Evolution motor. Quick rise time for high RPM and high
compression performance applications.
B. Screamin’ Eagle 10mm Phat Spark Plug Wires
C
32092-98A
31963-89A
D
Fits all ’84-’99 carbureted Evolution-equipped and ’86-’03 XL
models with electronic ignitions (except ’98-later XL1200S).
31653-97
Black.
$54.95
D.Screamin’ Eagle Street Legal
Ignition Systems – Twin Cam
This module is 50-state street legal, and is programmed
to allow the engine to turn 6200 RPM. Designed for use on
engines with stock compression ratio.
OBSOLETE
31765-04A $119.95
Fits carbureted ’04-’06 Touring models.
X
OBSOLETE
2
C. Screamin’ Eagle Performance Coils –
Evolution Engines
2
D. Screamin’ Eagle Street Legal
Ignition System – Twin Cam
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
SCREAMin’ Eagle
31901-08
31902-08
500
SCREAMIN’ EAGLE
®
A
Decorative Accessories
A. SCREAMin’ EAglE® ACCESSoRy CollECtion
Add style to your motorcycle with these Screamin’ Eagle
accessories, and proclaim you’re serious about performance.
1. oval Air Cleaner insert
Fits ’66-’03 XL models.
29382-97A
29383-97A
Black on Silver.
Silver on Black.
$7.95
$7.95
1
2. timer Cover
Fits models with horizontal holes.
32565-97A
32566-97A
Silver on Black.
Black on Silver.
$5.95
$5.95
3. timer Cover
Fits ’99-later Twin Cam-equipped models.
32744-99
32743-99
Black on Silver.
Silver on Black.
$7.95
$7.95
4. Air Cleaner insert
Fits ’84-later Evolution® 1340-equipped models.
29619-99
29622-99
Silver on Black.
Black on Silver.
3
$7.95
$7.95
5. Air Cleaner insert
Fits ’99-’06 Twin Cam-equipped models.
29620-99
29567-99
Black on Silver.
Silver on Black.
2
$7.95
$7.95
B. SCREAMin’ EAglE® AiR ClEAnER tRiM Ring
29503-07
Black & Orange.
$7.95
Fits ’07-later Touring and Softail® models (except FLSTSB),
®
and ’07 Dyna models equipped with Original Equipment air
cleaner cover.
C. SCREAMin’ EAglE MEdAllion
This easy-to-install medallion features the race-bred
“Screamin’ Eagle” logo. The self-adhesive medallion can be
used on sissy bar uprights, battery covers or any flat surface.
92209-05
Fits Medallion Plate-style Sissy Bar Uprights and
other flat surfaces.
4
$21.95
5
A. SCREAMin’ EAglE ACCESSoRy CollECtion
B
B. SCREAMin’ EAglE AiR ClEAnER tRiM Ring
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
C
C. SCREAMin’ EAglE MEdAllion
d
E
SCREAMIN’ EAGLE 501
®
Specialty Tools
d. SCREAMin’ EAglE® CASE BoRing tool
The Screamin’ Eagle Case Boring Tool takes the guesswork out
of boring Twin Cam engine cases to accept oversize cylinders.
Designed to be used with a heavy-duty 15" drill press or milling
machine, the fixture holds and aligns the cases for accurate
machining. Ideal for installing a Twin Cam 110 cubic inch Stage
Kit or a race-use “bigger bore” 113 cubic inch stroker cylinders.
94419-06
For use on ’99-later Twin Cam engines.
$1,398.95
E. SCREAMin’ EAglE tiMKEn® BEARing tool
Timken tool allows you to convert 2003-later Twin Cam
models with a factory-installed output shaft roller bearing
to a Timken tapered bearing. Tool allows technician to press
in a bearing sleeve without having to do a precision crankcase boring operation. Sleeve presses in and is retained with
screws. Timken bearing races are then pressed into the sleeve.
Timken Bearing Sleeve P/N 34822-08 is sold separately.
34823-08
For use on ’03-later Twin Cam-equipped models.
d. SCREAMin’ EAglE CASE BoRing tool
E. SCREAMin’ EAglE tiMKEn BEARing tool
f
g
$749.95
f. SCREAMin’ EAglE® AUtoMAtiC CoMpRESSion
RElEASE tool
This kit provides all the fixtures and tools necessary for a
machinist to install Automatic Compression Release (ACR)
valves onto stock or Screamin’ Eagle Performance cylinder heads. Complete installation requires separate purchase
of Automatic Compression Release Kit P/N 28861-07A and
model-specific Wiring Harness P/N 70623-06 or 70623-08.
94648-08
$949.95
For machining of Original Equipment cylinder heads or
Screamin’ Eagle Performance Heads P/N 16952-08, 1695308, 16952-99C and 16953-99C on ’99-later Twin Camequipped models.
94638-08
For use on ’99-later Twin Cam models.
$249.95
h. SCREAMin’ EAglE AUtoMAtiC CoMpRESSion
RElEASE REMovAl tool
Socket designed for removal and installation of HarleyDavidson® Automatic Compression Release solenoid.
f. SCREAMin’ EAglE AUtoMAtiC
CoMpRESSion RElEASE tool
g. SCREAMin’ EAglE MEChAniCAl
CoMpRESSion RElEASE MAChining fixtURE
h
nEw
i
94048-09
For all Harley-Davidson models equipped with
Screamin’ Eagle Automatic Compression Release.
i. SCREAMin’ EAglE oxygEn SEnSoR SoCKEt tool
This cut-away socket is designed to clear the wire lead and
simplify the removal or installation of the oxygen sensor on all
closed loop fuel injected models. Manufactured to withstand
up to 125 ft-lb of torque, the socket has a 3/8" drive receiver
or can be used with a 7/8" wrench.
94136-09
For use on ’06-later EFI models with 02 sensors.
h. SCREAMin’ EAglE AUtoMAtiC
CoMpRESSion RElEASE REMovAl tool
i. SCREAMin’ EAglE oxygEn SEnSoR
SoCKEt tool
$39.95
$35.95
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
SCREAMin’ EAglE
g. SCREAMin’ EAglE MEChAniCAl CoMpRESSion
RElEASE MAChining fixtURE
Simplify the addition of mechanical compression releases to
your stock Twin Cam cylinder heads. The fixture allows precision accuracy for the drilling, spot facing, and tapping necessary to install Compression Release Kit P/N 32076-04 (sold
separately). Fixture accommodates the machining of the front
and rear heads, even when the valves are already in place, and
when the process is complete, the Compression Release Kit
P/N 32076-04 threads in place.
502
SCREAMIN’ EAGLE
®
Specialty Tools
A
nEw
A
nEw
A. SCREAMin’ EAglE® twin CAM ChAin
tEnSionER tool
A must for any camshaft work, this tool lets you easily assemble and disassemble cams by unloading the pressure on the
primary and secondary chain tensioners on early Twin Cam
models.
94075-09
For use on ’99-’05 Dyna®, ’00-’06 Softail® and
’99-’06 Touring models.
$39.95
B. SCREAMin’ EAglE pRiMARy dRivE loCKing tool
This tool is designed to keep the primary drive system from
rotating during the installation and removal of the compensator sprocket nut or the clutch hub nut. The tool is easily
inserted into the primary drive system and wedges in place
to restrict movement without damaging the sprocket teeth.
94102-09
For use on ’07-later Touring models.
$34.95
C. SCREAMin’ EAglE MAinShAft SpRoCKEt And
pUlly loCKnUt REMovAl And inStAllAtion tool
This extended-length socket is designed to fit over the long
transmission shaft simplifying the removal and installation
of the large transmission pulley locknuts. Manufactured from
hardened tool steel, the socket includes a stabilizer spacer
that keeps the threaded shaft end from hitting the socket
during removal and installation.
94137-09
$149.95
For use on ’84-later Evolution® 1340-equipped models, and
’99-’05 Dyna, ’00-’06 Softail and ’99-’06 Touring models.
94141-10
$149.95
For use on ’06-later Dyna and ’07-later Softail and
Touring models.
A. SCREAMin’ EAglE twin CAM ChAin
tEnSionER tool
B
nEw
A. SCREAMin’ EAglE twin CAM ChAin
tEnSionER tool
C
nEw
d. SCREAMin’ EAglE® CAM loCKing tool
Tool allows a technician to effectively lock the camshaft and
crankshaft sprockets to properly remove, replace, and torque
the sprocket bolts. Tool is made from non-marring Delrin® to
protect the crank and cam sprocket teeth and surface finishes.
94076-09
Roller Chain.
$34.95
For use on ’06-later Dyna®, ’07-later Softail® and
’07-later Touring models.
94077-09
Silent Chain.
$34.95
For use on ’99-’05 Dyna, ’00-’06 Softail and
’99-’06 Touring models.
B. SCREAMin’ EAglE pRiMARy dRivE
loCKing tool
d
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
nEw
d. SCREAMin’ EAglE CAM loCKing
tool – RollER ChAin
C. SCREAMin’ EAglE MAinShAft
SpRoCKEt And pUlly loCKnUt REMovAl
And inStAllAtion tool
d
nEw
d. SCREAMin’ EAglE CAM loCKing
tool – SilEnt ChAin
nEw
E
nEw
E
SCREAMIN’ EAGLE 503
®
Specialty Tools
E. SCREAMin’ EAglE® CAMShAft REMovAl And
inStAllAtion tool
This multi-function tool is designed to remove and replace the
front and rear camshafts and the ball bearings of a Twin Cam
88®-based engine. It precisely aligns the camshaft to ensure
smooth press-in and press-out of the support plate.
94085-09
For use on ’99-’05 Dyna®, ’00-’06 Softail® and
’99-’06 Touring models.
$127.95
f. SCREAMin’ EAglE® innER CAM
BEARing REMovAl tool
This precision tool simplifies the removal of the inner cam
bearing, and reduces the risk of damaging the crankcase. Tool
is also designed to keep the pin rollers from accidentally falling into the crankcase.
94078-09
For use on ’99-’05 Dyna®, ’00-’06 Softail® and
’99-’06 Touring models.
94144-09
For use on ’06-later Dyna and ’07-later Softail and
Touring models.
E. SCREAMin’ EAglE CAMShAft REMovAl And
inStAllAtion tool
nEw
f
E. SCREAMin’ EAglE CAMShAft REMovAl And
inStAllAtion tool
nEw
f
$120.95
$120.95
g. SCREAMin’ EAglE innER CAM BEARing
inStAllAtion tool
This precision tool is designed to ease the installation of the
inner cam bearing into the bore. Manufactured from hardened
tool steel, this precision tool perfectly positions the bearings
and prevents the pin bearings from falling into the engine case.
94107-09
$179.95
For use on ’99-later Twin Cam engines featuring both earlyand late-model inner cam bearing designs.
h. SCREAMin’ EAglE MAinShAft BEARing RACE
REMovAl And inStAllAtion tool
This tool is designed to easily remove and install the bearing
race on the transmission mainshaft. Manufactured from hardened tool steel, the tool operates with standard wrenches.
SCREAMin’ EAglE
94129-09
$195.95
For use on ’84-later Evolution® 1340 and Twin Cam-equipped
models with five speed transmissions.
f. SCREAMin’ EAglE innER CAM BEARing
REMovAl tool
nEw
g
g. SCREAMin’ EAglE innER CAM BEARing
inStAllAtion tool
f. SCREAMin’ EAglE innER CAM BEARing
REMovAl tool
nEw
h
h. SCREAMin’ EAglE MAinShAft BEARing
RACE REMovAl And inStAllAtion tool
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
504
SCREAMIN’ EAGLE
®
Specialty Tools
A
NEw
A
NEw
A. Screamin’ Eagle® Rocker Box Bolt
Ratcheting Wrench
This high-quality wrench simplifies working on the rocker
box while the engine is mounted in the motorcycle’s frame.
This tool features a low-profile design to allow access to the
tight spaces between the frame and the engine. The wrench
has a long handle for increased reach, a replaceable bit and
a reversible ratcheting action so the socket head cap screw
can be ratcheted in or out. The comfortable soft vinyl grip with
Screamin’ Eagle logo protects the engine from scratches.
94057-09
$34.95
For use on all Harley-Davidson® Big Twin
rocker box covers.
B.Screamin’ Eagle Lower Rocker Box Wrench
This quality long-handled wrench is designed to simplify
installation and removal of the lower rocker box on Twin Cam
engines. The special 7/16" socket is shaped to reach these
confined areas. The comfortable soft vinyl grip with Screamin’
Eagle logo protects the engine from scratches.
94074-09
$25.95
For use on Twin Cam engines.
A. Screamin’ Eagle Rocker Box Bolt
Ratcheting Wrench
A. Screamin’ Eagle Rocker Box Bolt
Ratcheting Wrench
B
NEw
B
NEw
C.Screamin’ Eagle Intake Manifold Wrench
This reversible ratcheting box wrench simplifies and speeds
up the installation and removal of the intake manifold socket
head cap screws used on Big Twin® engines. The comfortable
soft vinyl grip with Screamin’ Eagle logo protects the engine
from scratches.
94063-09
$34.95
For use on all Big Twin engines.
D.Screamin’ Eagle Flywheel Shaft
Ratchet Wrench
This high-quality ratcheting tool allows technician to manually rotate the flywheel of the engine to check cam timing, and
to inspect valve-to-valve, piston-to-valve and piston-to-piston
clearances. Designed to easily slip over the output crankshaft
spline, the wrench features a simple-to-use finger-operated
lever to reverse the ratcheting direction.
94038-09
24 Tooth Spline.
$54.95
For use on ’06-later Dyna® and ’07-later Touring
and Softail® models.
94088-09
Sportster Spline.
$39.95
For use on ’72-later XL and XR models.
94089-09
10 Tooth Spline.
$39.95
For use on ’72-’06 Big Twin engines (except ’06 Dyna models).
B. Screamin’ Eagle Lower
Rocker Box Wrench
B. Screamin’ Eagle Lower
Rocker Box Wrench
C
NEw
C
C. Screamin’ Eagle Intake
Manifold Wrench
C. Screamin’ Eagle Intake
Manifold Wrench
D
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
NEw
D. Screamin’ Eagle Flywheel Shaft
Ratchet Wrench
NEw
D
NEw
D. Screamin’ Eagle Flywheel Shaft
Ratchet Wrench
E
nEw
nEw
E
SCREAMIN’ EAGLE 505
®
Specialty Tools
E. SCREAMin’ EAglE pUSh Rod tUBE
inStAllAtion And REMovAl tool
This handy tool simplifies the removal and installation of the
retaining clip on Harley-Davidson® collapsible push rod tubes.
Convenient design reduces the risk of scratched engine parts
and hands, and the quality composite handles provide a sure
and solid grip.
94086-09
$39.95
For use on Harley-Davidson collapsible push rod tubes.
f. SCREAMin’ EAglE ChRoME pRotECtivE
SoCKEtS – BlACK finiSh
Unique internal composite material protects the chrome finish
on fasteners when these sockets are used. Mirror black finish,
with laser etched SE logo, torque limit and size on each socket.
For use on all Harley-Davidson motorcycles.
94670-08
$159.95
(9) 3/8" Drive Sockets 3/8"-15/16". SAE Standard.
94666-08
$149.95
(8) 3/8" Drive Sockets 8mm-15mm. Metric.
E. SCREAMin’ EAglE pUSh Rod tUBE
inStAllAtion And REMovAl tool
g. indUCtion AlignMEnt BRACKEt Kit
The Induction Alignment Bracket Kit provides exact alignment
and easy installation of engine intake manifolds, preventing
intake air leaks.
E. SCREAMin’ EAglE pUSh Rod tUBE
inStAllAtion And REMovAl tool
nEw
f
40054-01
$19.95
For use on Twin Cam and Evolution® 1340 engines equipped
with CV Carburetors or Electronic Fuel Injection.
SCREAMin’ EAglE
h. SCREAMin’ EAglE ASSEMBly lUBE
Screamin’ Eagle Assembly Lube provides superior protection during installation or servicing of internal engine components. Formulated with a high tackifier, this lubricant clings to
parts and provides excellent start-up and break-in protection.
It provides excellent corrosion resistance, and it won’t drip off
like common oil when you set coated parts aside to work on
the rest of the engine. That’s why we use it on all of our test
engines. Don’t start your re-built or serviced engine without it.
Recommended applications: cams, gears, crankpins, piston
wrist pins, oil pumps, valve guides, rocker arm and push rod
tips and roller tappet wheels.
94971-09
Universal.
$9.95
f. SCREAMin’ EAglE ChRoME pRotECtivE SoCKEtS – BlACK finiSh
g
g. indUCtion AlignMEnt BRACKEt Kit
nEw
h
h. SCREAMin’ EAglE ASSEMBly lUBE
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement