SMARTSTANDARD 6 Feet Stainless Steel Sliding Barn Door Hardware Kit - Heavy Duty Sturdy Barn Door Track - Smoothly and Quietly - Step-by-Step Installation Instruction -Fit 36" Wide Door Panel User Manual

SMARTSTANDARD 6 Feet Stainless Steel Sliding Barn Door Hardware Kit - Heavy Duty Sturdy Barn Door Track - Smoothly and Quietly - Step-by-Step Installation Instruction -Fit 36" Wide Door Panel

This sliding barn door hardware kit from SMARTSTANDARD includes everything you need to install a sliding barn door in your home. The kit includes a 6-foot stainless steel rail, two hangers, two door stoppers, two wall spacers, a floor guide, and all necessary mounting hardware. Installation is easy, with step-by-step instructions included. The heavy-duty construction ensures that your barn door will operate smoothly and quietly for years to come.

PDF Download

Document

Product Installation

Instructions Guide

Stain Barn door hardware

Website: smartstandard.com

Email: [email protected]

OPERATION CAUTIONS:

Please read this installation guide carefully before installation.

Please refer to the relevant content of this store for more product use.

Pencil

Phillips

Screwdriver

Wrench Tape

Plumb Bob Level Drill Drill Bit

Rail Hanger

Floor Guide Door Stopper

Door Stopper

Lag Bolt & Anchor Wall Spacer

Wrench Hex Key

A A A

C ⁄”

1”

D H E

H+ 1/”

According to your wood stud spacing.

The distance between each wall spacer can be customized.

Distance from door top side to holes on the wall is1”.

Distance from the bottom of the door to the floor is /”.

Door height is H .

The height of holes on the wall is H+1/” .

H+1/”

* Header Board and

Lag Bolts for installing

Header Board are not included in kit.

It is very important to determine whether you will be installing a Header Board prior to installing the track.

Due to many overlapping factors such as the location of wall studs (Our rail come with pre-drilled holes every 16” on center), the weight of a barn door and the various types of trim used in homes, we recommend using a Header Board in all situations.

Please install a 1”x4” or 1”x6” Header Board above the door opening directly into studs.

Header Board must be solid wood and measure at least the full length of the track or longer.

1.1

1.2

Part A Part B Part C

Connect two rails together (If the rail is one piece please skip this step).

Unscrew the wall spacer into 3 parts.

Insert door stoppers into rail.

Install door stoppers between A-B and C-D.

Door stopper is used to prevent the hangers coming out of the rail.

We provide 2 kinds of screws for you to install rail onto concrete wall or drywall.

A Concrete wall Installation.

Install the anchor to holes on the concrete wall first, then install lag bolt to anchor.

B Drywall Installation.

Install the lag bolt to wood stud or head board directly.

Install hangers on the top side of door using door lag bolts as the pictures below.

Make sure the door lag bolts are located in the middle line at the end of the door holes .

Hang the door over the rail.

Adjust the screw to a suitable height and then tighten it.

Part A

Part BPart C

Install the rail on the the wall spacer.

Complete the wall spacer by screwing

Part B and Part C to PartA.

/”

/”

Use router or circular saw to create a kerf at bottom of the door, along the center to allow the tip of the T-shaped floor guide to fit in between, to keep your door stable and prevent the door bottom swinging back and forth when you slide it open and closed.

Adjust the 2 door stoppers to find a suitable position, Use the hex key to screw the door stoppers in place.

2’’

2/’’

Install the floor guide . Put floor guide on the floor first to fix a suitable position and make a mark so that the tip of the floor guide can work well in the slot.

Use drill bit to drill holes on the floor where the mark is, and then install the floor guide.

* The number of tracks and accessories varies from model to model.

Please refer to the actual receipt.

* The spacing of A depends on your actual situation

Hello! I am an AI chatbot specifically trained to assist you with the SMARTSTANDARD 6 Feet Stainless Steel Sliding Barn Door Hardware Kit - Heavy Duty Sturdy Barn Door Track - Smoothly and Quietly - Step-by-Step Installation Instruction -Fit 36" Wide Door Panel User Manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant terminated

Product Installation

Instructions Guide

Stain Barn door hardware

Website: smartstandard.com

Email: [email protected]

/”

/”

Related

Furnitures Sliding Door User Manual

SMARTSTANDARD 10FT Heavy Duty Double Door Sliding Barn Door Hardware Kit,Smoothly and Quietly-Easy to Install-Includes Step-by-Step Installation Instruction Fit 30" Wide Door Panel User Manual

SMART STANDARD Barn Door Hardware Installation Guide

SMARTSTANDARD SmartStandard 8FT One-Piece Track Double Sliding Barn Door Hardware Kit - Smoothly and Quietly - Easy to Install -Includes Step-by-Step Installation Instruction - Fit 48" Split Door Panel (J Shape) Sliding Door Hardware User Manual

SMARTSTANDARD Barn Door Hardware Kit Sliding Door Hardware User Manual

SMARTSTANDARD 6.6 FT Heavy Duty Sliding Door Hardware Manual

Movisa MVT22MR 6.6 ft./79.2 in. J-Shaped Sliding Barn Door Track and Hardware Kit for Single Door Instructions

SMARTSTANDARD SMARTSTANDARD 5ft Heavy Duty Sturdy Sliding Barn Door Hardware Kit -Smoothly and Quietly -Easy to Install -Includes Step-by-Step Installation Instruction Fit 30" Wide Door Panel ( J Shape Hanger) Sliding Door Hardware User Manual

SMARTSTANDARD 8FT Heavy Duty Sliding Barn Sliding Door Hardware User Manual

SMARTSTANDARD 6.6 FT Sliding Barn Door Soft Close Hardware Kit - Smoothly and Quietly-Single Door-Invisible Design-Includes Step-by-Step Installation Instruction -Fit 36''-40" Door Panel (J Shape) User Manual

SMARTSTANDARD 5 FT Heavy Duty Sturdy Sliding Barn Door Hardware Kit User Manual

SMARTSTANDARD 6.6 FT Top Mount Sliding Barn Door Hardware Kit Whole Set User Manual