XR-5790R/5800R

SERVICE MANUAL

AEP Model

UK Model

Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.

“DOLBY” and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation.

Photo: XR-5800R

Model Name Using Similar Mechanism

Tape Transport Mechanism Type

NEW

MG-25G-136

SPECIFICATIONS

MICROFILM

FM/MW/LW CASSETTE CAR STEREO

TABLE OF CONTENTS

1.

GENERAL

Location of Controls (XR-5790R) .................................. 3

Location of Controls (XR-5800R) .................................. 3

Setting the Clock ............................................................. 4

Using the Rotary Commander ........................................ 4

Installation ....................................................................... 5

Connection ...................................................................... 6

Connection Diagram ....................................................... 8

2.

DISASSEMBLY

......................................................... 9

3.

ASSEMBLY OF MECHANISM DECK

........... 11

4.

MECHANICAL ADJUSTMENTS

....................... 14

5.

ELECTRICAL ADJUSTMENTS

Test Mode ........................................................................ 14

Tape Deck Section .......................................................... 14

Tuner Section .................................................................. 15

6.

DIAGRAMS

6-1. Printed Wiring Boards – Main Section – ....................... 22

6-2. Schematic Diagram – Main Section – ............................ 25

6-3. Printed Wiring Board – Panel Section – (XR-5790R) .. 30

6-4. Schematic Diagram – Panel Section – (XR-5790R) ..... 32

6-5. Printed Wiring Board – Panel Section – (XR-5800R) .. 35

6-6. Schematic Diagram – Panel Section – (XR-5800R) ..... 37

6-7. IC Pin Function Description ........................................... 39

7.

EXPLODED VIEWS

................................................ 42

8.

ELECTRICAL PARTS LIST

............................... 46

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270 ˚C during repairing.

• Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering or unsoldering.

Notes on chip component replacement

• Never reuse a disconnected chip component.

• Notice that the minus side of a tantalum capacitor may be damaged by heat.

– 2 –

SECTION 1

GENERAL

This section is extracted from instruction manual.

– 3 –

– 4 –

– 5 –

– 6 –

(XR-5800R only)

– 7 –

– 8 –

SECTION 2

DISASSEMBLY

Note:

Follow the disassembly procedure in the numerical order given.

FRONT PANEL ASS’Y

1

Push the button

(release).

2

Remove the front panel ass’y to the direction of the arrow

A

.

A

COVER ASS’Y

2

1

3 cover ass’y

2

1

– 9 –

SUB PANEL, MECHANISM DECK (MG-25G-136)

3 connector

(CN352)

5 screw

(PTT2.6

×

6)

6 mechanism deck

(MG-25G-136)

4 flexible flat cable

(CN351)

2 sub panel

1 three screws

(PTT2.6

×

8)

1 three screws

(PTT2.6

×

8)

MAIN BOARD, HEAT SINK

2 rubber cap (25)

3 two ground point screws

4 main board

5 four screws

(PTT2.6

×

8)

1 screw (PTT2.6

×

8)

5 two screws

(PTT2.6

×

8)

6 heat sink

1 two screws

(PTT2.6

×

8)

– 10 –

SECTION 3

ASSEMBLY OF MECHANISM DECK

Note:

Follow the assembly procedure in the numerical order given.

HOUSING

5

Fit projection on

C

part.

2

Install the hanger onto

two claws of the housing.

4

Fit claw on

B

part.

7

Holder the hanger by bending the claw.

1

Install the catch to the hanger. hanger

3

Put the housing

under

A

part.

6

Fit projection on

D

part.

housing

C

part

8

Hold the hanger by

bending the claw.

D

part

A

part

B

part

2

Move the arm (suction) in the arrow

direction and fit on projection.

ARM (SUCTION)

projection

1

Fit the arm (suction) on the shaft.

– 11 –

LEVER (LDG-A) / (LDG-B)

shaft

A shaft

B shaft

C shaft

A shaft

B

1

Fit the lever (LDG-A)on

shafts

A

–

C

and install it.

3

type-E stop ring 2.0

2

Fit the lever (LDG-B) on

shafts

A

and

B

and

install it.

GEAR (LDG-FT)

hole gear (LDG-D)

5

gear (LDG-FT) hole lever (LDG-A) gear (LDG-FB)

4

Align hole in the gear (LDG-D)

with hole the lever (LDG-A)

6

polyethylene washer

2

tension spring (LD-2)

1

2

tension spring (LD-1)

– 12 –

3

Move the lever (LDG-B)

in the arrow direction.

GUIDE (C)

2

guide (C)

1

three claws

– 13 –

SECTION 4

MECHANICAL ADJUSTMENTS

1. Clean the following parts with a denatured-alcohol-moistened swab: playback head pinch roller rubber belt idlers capstan

2. Demagnetize the playback head with a head demagnetizer.

3. Do not use a magnetized screwdriver for the adjustments.

4. After the adjustments, apply suitable locking compound to the parts adjusted.

5. The adjustments should be performed with the power supply voltage unless otherwise noted.

•

Torque Measurement

Mode Torqu Meter

Forward

Forward

Back Tension

Reverse

Reverse

Back Tension

FF, REW

CQ-102C

CQ-102C

CQ-102RC

CA-102RC

CQ-201B

Meter Reading

30 - 65 g•cm

(0.42 - 0.90 oz•inch)

0.5 - 4.5 g•cm

(0.01 - 0.06 oz•inch)

30 - 65 g•cm

(0.42 - 0.90 oz•inch)

0.5 - 4.5 g•cm

(0.01 - 0.06 oz•inch)

60 - 200 g•cm

(0.83 - 2.78 oz•inch)

•

Tape Tension Measurement

Mode Torqu Meter

Forward CQ-403A

Reverse CQ-403R

Meter Reading more than 90 g

(more than 3.18 oz) more than 90 g

(more than 3.18 oz)

SECTION 5

ELECTRICAL ADJUSTMENTS

TEST MODE

This set have the test mode function. In the test mode, FM Auto

Scan/Stop Level and AM (MW) Auto Scan/Stop Level adjustments can be performed easier than it in ordinary procedure.

<Set the Test Mode>

1. Set the “power select” switch (S801) is “A” position.

2. Turn ON the regulated power supply. (All LEDs on the set lights up, and the clock is displayed.)

Note:

Press the

[OFF]

button, if the clock is not displayed.

3. Push the preset

[4]

button.

4. Push the preset

[5]

button.

5. Press the preset

[1]

button for more than two seconds.

6. Then the display indicates all lights, the test mode is set.

<Release the Test mode>

1. Push the [OFF] button.

2. Return the “power select” switch (S801) to initially set position.

See the adjustment location from on page 17 for the adjustment.

TAPE DECK SECTION

0 dB=0.775 V

Tape Speed Adjustment

Setting:

test tape

WS-48A

(3 kHz, 0 dB) speed checker or frequency counter

4

Ω set speaker out terminal

– +

Procedure:

1. Put the set into the FWD PB mode.

2. Adjust adjustment resistor for inside capstan motor so that the reading on the speed checker or frequency counter becomes in specification.

Specification: Constant speed

Speed checker

–1.5 to +2.5%

Frequency counter

2,955 to 3,075 Hz

Adjustment Location: See page 17.

– 14 –

TUNER SECTION

0 dB=1 µV

Cautions during repair

When the tuner unit is defective, replace it by a new one because its internal block is difficult to repair.

Note:

Adjust the tuner section in the sequence shown below.

1. FM Auto Scan/Stop Level Adjustment

2. FM Noise Focus Adjustment

3. FM Stereo Separation Adjustment

4. FM Signal Meter Adjustment

5. AM (MW) Auto Scan/Stop Level Adjustment

FM Auto Scan/Stop Level Adjustment

Setting:

[SOURCE]

button: FM

FM RF signal generator antenna jack (J1)

0.01

µ

F set

Carrier frequency : 98.0 MHz

Output level : 22 dB (12.6

µ

V)

Mode : mono

Modulation : 1 kHz, 22.5 kHz deviation (30%)

Procedure:

1. Set to the test mode. (See page 14).

2. Push the

[SOURCE]

button and set to FM.

Display

REG

FM

INTRO

FM Noise Focus Adjustment

Setting:

[SOURCE]

button: FM

FM RF signal generator antenna jack (J1)

0.01

µ

F set

4

Ω level meter

+

– speaker out terminal

Carrier frequency : 98.00 MHz

Output level : 60 dB (1 mV)

Mode

Modulation

: stereo

: 1 kHz, 75 kHz deviation (100%)

Procedure:

1. Tuner the 98.00 MHz.

2. The then output level is supposing that (A) dB.

3. Adjust with the volume RV3 on TU1 so that the output level is

(A) –32 ± 2 dB then signal generator input set to –20 dB.

Adjustment Location: See page 17.

3. Adjust with the volume RV2 on TU1 so that the “FM” indication turns to “FM0” indication on the display window.

But, in case of already indicated “FM0”, turn the RV2 so that put out light “0” indication and adjustment.

Display

REG

INTRO

Adjustment Location: See page 17.

FM Stereo Separation Adjustment

Setting:

[SOURCE]

button: FM

FM RF signal generator antenna jack (J1)

0.01

µ

F set

4

Ω level meter

Carrier frequency : 98.0 MHz

Output level : 70 dB (3.2 mV)

Mode

Modulation

: stereo speaker out terminal

: main: 1 kHz, 20 kHz deviation (26.7%)

sub: 1 kHz, 20 kHz deviation (26.7%)

: 19 kHz pilot: 7.5 kHz deviation (10%)

+

–

Procedure:

FM Stereo signal generator output channel

L-CH

R-CH

R-CH

L-CH

Level meter connection

L-CH

L-CH

R-CH

R-CH

Level meter reading (dB)

A

B

Adjust RV4 on TU1 for minimum reading.

C

D

Adjust RV4 on TU1 for minimum reading.

L-CH Stereo separation: A-B

R-CH Stereo separation: C-D

The separations of both channels should be equal.

Specification: Separation more than 30 dB

Adjustment Location: See page 17.

– 15 –

FM Signal Meter Adjustment

Setting:

[SOURCE]

button: FM

FM RF signal generator antenna jack (J1)

0.01

µ

F set

Carrier frequency : 98.00 MHz

Output level : 35 dB (56.2

µ

V)

Mode : mono

Modulation : no modulation

Procedure:

1. Set to the test mode. (See page 14.)

2. Push the

[SOURCE]

button and set to FM.

Display

REG

FM

INTRO

3. Push the

[6]

button.

4. Adjust RV1 so that the display indication is “160”.

Display

FM

INTRO

Specification: Display indication: 158 to 162

Adjustment Location: See page 17.

AM (MW) Auto Scan/Stop Level Adjustment

Make this adjustment after “FM Auto Scan/Stop Level Adjustment”.

Setting:

[SOURCE]

button: MW

30

Ω

15 pF

65 pF

AM RF signal generator

AM dummy antenna

(50

Ω

) set antenna jack (J1)

Carrier frequency : 999 kHz

30% amplitude modulation by

1 kHz signal

Output level : 33 dB (44.7

µ

V)

Procedure:

1. Set to the test mode. (See page 14.)

2. Push the

[SOURCE]

button and set to FM.

3. Push the

[MODE]

button and set to MW.

Display

MW

999 @

INTRO

4. Adjust with the volume RV1 on TU1 so that the “MW” indication turns to “MW0” indication on the display window.

But, in case of already indicated “MW0”, turn the RV1 so that put out light “0” indication and adjustment.

Display

999

Adjustment Location: See page 17.

INTRO

– 16 –

Adjustment Location:

– SET UPPER VIEW –

Tape Speed Adjustment

TU1

RV1 AM (MW) Auto Scan/Stop Level Adjustment

RV2 FM Auto Scan/Stop Level Adjustment

RV3 FM Noise Focus Adjustment

RV4 FM Stereo Separation Adjustment

RV1 FM Signal Meter Adjustment

– 17 –

SECTION 6

DIAGRAMS

• IC Block Diagrams – MAIN Board –

IC1 TB2114F (EL)

24 23 22 21 20

19 18

17 16 15 14 13

RIPPLE

FILTER

VCC

– +

SEEK/RECP

– +

SEEK/RECP

4BIT

SWALLOW

COUNTER

PSC

2

MODULAS

PRESCALER

REF PHASE

COMPARATOR

SIG

12BIT

PROGRAMABLE

COUNTER

AMP AMP

VDD

AMP

REFERENCE

COUNTER

OSC IN

OR

X'TAL OSC

ON/OFF

BUFFER

18BIT

18BIT

22BIT

40BIT

SHIFT

RESISTER

BUS INTERFACE

N

DATA

I/O PORTS OUT PORTS

20BIT

IF COUNTER

1

2 3 4 5 6 7 8 9 10 11 12

IC3 TDA7330BD-013TR

20

19

VCC

18

2nd ORDER

ANTIALIAS

FILTER

8th ORDER

SC-BANDPASS

FILTER

17 16 15 14 13 12

+

–

TEST LOGIC

COSTAS

LOOP

PLL

57kHz

PHASE

DECODER

DIFF

DECODER

CLOCK

RECOVERY

PLL

1.4675kHz

ON/OFF

OSCILLATOR fx DIVIDER

11

1

2 3 4 5 6 7 8 9 10

– 18 –

IC151 LC75373ED

LSELO

L4

L3

L2

L1

34

35

36

37

38

VDD

39

R1

R2

R3

R4

RSELO

40

41

42

43

44

33

1

+

–

–

+

–

+

+

–

32

2

+

–

–

+

31 30 29 28 27 26 25 24 23

–

+

–

+

+

–

+

–

22 LFIN

21 LFOUT

20 LROUT

+

–

–

+

+

–

3 4 5

+

–

DECODER LATCH

SHIFT

REGISTER

CONTROL

+

– –

+

–

+

+

–

19 VREF

18

17

16

15

14

CE

DI

CL

VSS

RROUT

13 RFOUT

12 RFIN

6 7 8 9 10 11

IC351 CXA2509AQ-T4

PBFB2

PBRIN2

31

32

PBREF2

33

PBFIN2 34

VCT

PBGND

35

36

PBFIN1 37

PBREF1 38

PBRIN1

PBFB1

39

40

30

VCT

29 28 27 26

120

µ

/70

µ

T2

–

+

F2

F1

X1

+

X1

25

LPF

NR BIAS

TAPE/AUX

TAPE EQ

FWD/RVS

VCC

+

–

F3

24 23 22 21

24dB

+ –

MS

MODE

20

19

18

17

16

MSMODE

DRSW

TAPESW

INSW

NC

MS ON/

OFF

DETECT

15 NC

14

MSOUT

13 DGND

–

+

T1

+ –

12 MSTC

11 G1FB

1

120

µ

/70

µ

2 3 4 5 6 7

24dB

8 9 10

– 19 –

IC360 MM1322XFBE

GND

1

IN2 2

VCC 3

IN1

4

8 OUT2

7

VS

6

OUT1

5 GND

IC601 BA3918-V2

REGULATOR

1 2 3 4

–

+

OVER VOLTAGE

PROTECT

5 6 7 8 9

–

+

–

+

–

+

10 11 12

– 20 –

•

Waveforms

1

IC1

1

XO

200 ns

3

IC501

9

X OUT

42 mVp-p

2

IC3

9

XO

230 ns

4

IC501

!™

XT OUT

5.1 Vp-p

3.9 Vp-p

5 Vp-p

125 ns

30.6

µ s

– 21 –

11

12

13

8

9

10

4

5

6

7

•

MAIN BOARD IC501 MN1884820SC (SYSTEM CONTROLLER)

Pin No.

Pin Name

1

2

TUNMUT

AMPON

3 ILLON

I/O

O

Function

O FM audio signal muting control output terminal “H”: muting on

O Standby control signal output to the power amplifier (IC801) “L”: standby

Power supply on/off control signal output terminal at the illumination and liquid crystal display driver (IC901) “H”: power on

At power select switch (S801) on mode: “H” output at the accessory on

At power select switch (S801) off mode: “H” output at the power on

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

PW ON

AMPMUTE

RCIN1

VDD

X IN

X OUT

GND

XT IN

XT OUT

EX2

RESET

RDSCKI

BU IN

KEYACK

VOLSO

VOLCKO

VOLCE

TAPEMUT

LMLOD

LMEJ

AMSON

N/R OUT

AMSIN

PLLSO

PLLCKO

PLLCE

RDSSI

AD ON

O

I

Main system power supply on/off control signal output to the BA3918 (IC601) “H”: power on

O Muting control signal output to the power amplifier (IC801) “L”: muting on

I Rotary remote commander shift key A/D input terminal

— Power supply terminal (+5V)

I Main system clock input terminal (8 MHz)

O Main system clock output terminal (8 MHz)

— Ground terminal

I Sub system clock input terminal (32.768 kHz)

O Sub system clock output terminal (32.768 kHz)

Connected to ground

I

I

I

I

System reset signal input from the reset signal generator (IC571) and reset switch (S601)

“L” is input for several 100 msec after power on, then it changes to “H”

Serial data transfer clock signal input from the RDS decoder (IC3)

Battery detect signal input terminal “H”: battery on

Input of acknowledge signal for the key entry Acknowledge signal is input to accept function and eject keys in the power off status On at input of “L”

O Serial data output to the electrical volume (IC151)

O Serial data transfer clock signal output to the electrical volume (IC151)

O Chip enable signal output to the electrical volume (IC151)

O Tape muting on/off control signal output to the CXA2509AQ (IC351) “H”: tape muting on

O

Loading/tape operation motor control signal output to the MM1322XFBE (IC360)

(For the loading direction and forward side operation) *1

O

O

O

Loading/tape operation motor control signal output to the MM1322XFBE (IC360)

(For the eject direction and reverse side operation) *1

Tape auto music sensor control signal output to the CXA2509AQ (IC351)

“L” is output to lower the gain for audio level at FF/REW

Forward/reverse direction control signal output to the CXA2509AQ (IC351)

“L: forward direction, “H”: reverse direction

I

Whether a music is present or not from CXA2509AQ (IC351) is detected at auto music sensor

“L”: music is present, “H”: music is not present

O PLL serial data output to the FM/AM PLL (IC1)

O PLL serial data transfer clock signal output to the FM/AM PLL (IC1)

O PLL serial chip enable output to the FM/AM PLL (IC1)

I Serial data input from the RDS decoder (IC3)

O Power supply on/off control signal output for the A/D converter “L”: power on

32 DOLON I/O

Dolby control in/out terminal

At initial mode: valid/invalid selection input of dolby function (“L” input: valid)

At normal mode: dolby on/off control signal output “H”: dolby on

Not used this function in this set (fixed at “H”)

– 39 –

Pin No.

Pin Name

33

41

42

43

44

45

46

47

48

49

34

35

36

37

38

39

40

50

51

52

53

54

64

65

66

61

62

63

58

59

60

55

56

57

MTLON

CMON

TAPEON

ACCON

PLLSI

BEEP

LCDCKO

LCDSO

LCDINH

LCDCE

UNICKO

UNICKI

UNISI

UNISO

VDD

AVDD

AVREF+

KEYIN1

KEYIN0

D-BASS

KEYSEL

DSTSEL

RCIN0

VSM1

VSM0

AVREF–

AVSS

GND

BUSON

SYSRST

SEKOUT

TUNON

FM ON

MUT

I/O

I/O

Function

METAL control in/out terminal

At initial mode: valid/invalid selection input of METAL function (“L” input: valid)

At normal mode: METAL on/off control signal output “H”: METAL on

XR-5790R: Not used this function in this set (fixed at “H”)

XR-5800R: Used for the this function

O Capstan/reel motor (M901) drive signal output terminal “H”: motor on

O Tape system power supply on/off control signal output terminal “H”: tape on

I Accessory detect signal input terminal “L”: accessory on

I PLL serial data input from the FM/AM PLL (IC1)

O Beep sound output terminal

O Serial data transfer clock signal output to the liquid crystal display driver (IC901)

O Serial data output to the liquid crystal display driver (IC901)

O

Blank indicate control signal output to the liquid crystal display driver (IC901)

“L”: no display

O Chip enable output to the liquid crystal display driver (IC901)

O Serial data transfer clock signal output terminal for the unilink Not used (pull down)

I

I

Serial data reading clock signal input terminal for the unilink Not used (fixed at “L”)

Serial data input terminal for the unilink Not used (fixed at “L”)

O Serial data output terminal for the unilink Not used (pull down)

— Power supply terminal (+5V)

— Power supply terminal (+5V) (for A/D converter)

I Reference voltage input terminal (+5V) (for A/D converter)

I

Key input terminal (A/D input)

XR-5790R:

6, INTRO 1, REPEAT 2, 3, BL SKIP 6, ATA 5, 4, PTY, AF/TA, PRST +/–, DSPL keys input (LSW921 to LSW932)

XR-5800R:

6, INTRO 1, REPEAT 2, 3, BL SKIP 6, ATA 5, MTL 4, PTY, AF/TA, BTM

SENS, DSPL keys input (LSW921 to LSW931)

I

Key input terminal (A/D input)

XR-5790R: OFF, SOURCE, MODE

*, + ) + SEEK AMS, – = 0 SEEK AMS,

VOLUME –, SEL, VOLUME +, ATT , BTM SENS keys input (LSW901 to LSW910)

XR-5800R: OFF, SOURCE, MODE

*, + ) + SEEK AMS, – = 0 SEEK AMS,

VOLUME –, SEL, VOLUME +, ATT keys input (LSW901 to LSW908 and LSW910)

I

I

I

D-BASS switch (SW951) input (A/D input)

Setting terminal for the key (fixed at center voltage)

Destination setting terminal

AEP, UK, South European models: fixed at “L”, German model: fixed at “H”

I

I

I

Rotary remote commander shift key A/D input terminal

Signal meter voltage detection input terminal Not used (fixed at “L”)

FM and AM signal meter voltage detection input from the FM/AM tuner unit (TU1)

I Reference ground terminal

— Ground terminal (for A/D converter)

— Ground terminal

O Bus on/off control signal output terminal Not used (pull down)

O Reset signal output terminal “L”: reset Not used (pull down)

O Seek control signal output to the FM/AM tuner unit (TU1)

O Tuner system power supply on/off control signal output to the BA3918 (IC601) “H”: tuner on

O FM system power supply on/off control signal output to the BA3918 (IC601) “H”: FM on

O Line muting control signal output terminal “H”: line muting on

– 40 –

Pin No.

Pin Name

67

68

69

70

71

72

73

74

75

76

77

78

79

80

AF SEK

COLOR

NOSESW

ST IN

SD IN

REL T

POS3

POS2

POS1

POS0

PW SEL

TELEMUTE

TEST

ILLIN

I

I

I

I

I

I/O Function

O AF seek control signal output terminal Not used (open)

I

I

Setting terminal for the illumination color “L”: amber, “H”: green Not used (open)

Detects the removal of the attaching and removing type front panel block “L”: attaching

I/O

Input of FM stereo detection signal from FM/AM tuner unit (TU1), and output of forced monaural control signal to FM/AM tuner unit (TU1) (Commonly used for stereo display input and forced monaural output)

FM stereo detection at input of “L”, forced monaural at output of “L”

I

Station detector detect input from the FM/AM tuner unit (TU1)

Stop level for SEEK, BTM, etc. is determined SD is present at input of “H”

Reel table rotation detect signal input from the take-up and supply reel sensor

Tape position detect input from tape operation switch on the mechanism block

I

I

I

I

Power select switch (S801) input terminal

“L”: position A (halt mode), “H”: position B (operation mode)

Telephone muting signal input terminal

At input of “L”, the signal is attenuated by –20 dB Used for XR-5800R only

Setting terminal for the test mode “L”: test mode (normally fixed at “H”)

Not used (fixed at “L”)

*1 loading/tape operation motor control

MODE

TERMINAL

LMLOD (pin @™)

LMEJ (pin @£)

STOP

“L”

“L”

LOADING/

FORWARD

“H”

“L”

EJECT/

REVERSE

“L”

“H”

BRAKE

“H”

“H”

– 41 –

NOTE:

• -XX and -X mean standardized parts, so they may have some difference from the original one.

• Color Indication of Appearance Parts

Example:

KNOB, BALANCE (WHITE) . . . (RED)

↑ ↑

Parts Color Cabinet's Color

SECTION 7

EXPLODED VIEWS

• Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.

• The mechanical parts with no reference number in the exploded views are not supplied.

• Hardware (# mark) list and accessories and packing materials are given in the last of the electrical parts list.

(1) CHASSIS SECTION

8

F801

17

7

MG-25G-136

18

#3

14

19

16

4

6

3

5

15

12

#2

10

#2

#2

XR-5800R

9

#2

#2

11

2

Front panel ass’y

#1

13

#2

#2

1

Ref. No.

Part No.

3

4

1

2

* 5

* 6

* 6

* 6

* 6

7

Description

3-009-294-01 PANEL, SUB

3-935-003-01 SPRING, TORSION

3-932-205-21 DOOR, CASSETTE

X-3367-636-1 LOCK ASSY

3-009-306-01 SHEET, INSULATING

Remark Ref. No.

Part No.

9

* 10

* 11

12

* 13

Description Remark

1-777-989-31 CORD (WITH CONNECTOR) (ATT) (5800R)

3-009-307-01 BRACKET (IC)

3-010-471-01 HEAT SINK

3-935-014-01 CUSHION (U)

3-009-813-01 CHASSIS

A-3313-356-A MAIN BOARD, COMPLETE (5790R: AEP, UK)

A-3313-357-A MAIN BOARD, COMPLETE (5790R: German)

A-3313-363-A MAIN BOARD, COMPLETE

(5800R: AEP, UK, South European)

A-3313-364-A MAIN BOARD, COMPLETE (5800R: German)

3-915-923-01 SCREW, GROUND POINT

14

* 15

16

17

18

3-937-650-01 PLATE (C), GROUND

A-3309-740-A POWER BOARD, COMPLETE

1-782-092-11 CORD (WITH CONNECTOR) (ISO-P) (POWER)

1-782-093-11 CORD (WITH CONNECTOR) (ISO-S)

(SPEAKER)

3-012-859-01 CAP (25), RUBBER

* 8

X-3373-269-1 COVER ASSY (ISO)

* 19

F801

3-012-105-01 BRACKET (HS)

1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) (10A)

– 42 –

(2) FRONT PANEL SECTION

(XR-5790R)

65

#5 not supplied

(KEY board)

54

55

56

57

58

52

59

66

LCD901

60

61

62

63

64

53

51

#5

Ref. No.

Part No.

51

* 52

53

54

55

Description

3-018-930-01 KNOB (D-BASS)

3-014-857-01 SHEET (LCD) (T)

3-010-398-01 BUTTON (RELEASE)

3-010-395-01 SPRING (RELEASE)

X-3374-695-1 PANEL SUB ASSY

56

57

58

59

Remark

Ref. No.

Part No.

60

* 61

* 62

* 63

64

Description Remark

3-010-389-01 BUTTON (P. A. P) (PTY. AF/TA. –. PRST. +)

3-010-375-01 SHEET (REFLECTOR)

3-018-385-01 PLATE (LCD), LIGHT GUIDE

3-018-386-01 HOLDER (LCD)

3-010-382-01 PANEL, FRONT BACK

3-010-383-01 BUTTON (SOURCE)

3-010-384-01 BUTTON (M. O. S)

(

)

3-010-385-11 BUTTON (S. M. +/–) (–. SEL. +. ATT. SENS)

3-010-387-01 BUTTON (PRESET)

( 6. 1. 2. 3. 4. 5. 6. DSPL)

65

* 66

3-015-036-01 CUSHION (BACK PANEL)

3-014-861-01 SHEET (LCD) (B)

LCD901 1-801-968-11 DISPLAY PANEL, LIQUID CRYSTAL

– 43 –

(3) FRONT PANEL SECTION

(XR-5800R)

not supplied

(KEY board)

102

#5

#5

105

107

108

109

111

104

103

101

113

114

112

115

LCD901

106

116

117

not supplied

118

Ref. No.

101

102

103

104

105

* 106

107

108

109

Part No.

Description

3-018-799-01 BUTTON (D-BASS)

3-015-036-01 CUSHION (BACK PANEL)

3-016-924-01 BUTTON (L) (2) (+. –)

3-009-304-01 BUTTON (RELEASE)

3-932-475-01 SPRING (RELEASE)

Remark Ref. No.

Part No.

111

112

113

* 114

* 115

Description

3-016-927-01 BUTTON (1-3) (

6. 1. 2. 3)

3-016-928-11 BUTTON (4-6) (4. 5. 6)

3-016-929-01 BUTTON (R) (2) (PTY. AF/TA. r. SENS)

3-019-151-01 PLATE (LCD), GROUND

3-019-150-01 SHEET (REFLECTOR)

Remark

3-019-149-01 PLATE, LCD

X-3374-682-1 PANEL SUB ASSY

3-009-300-01 BUTTON (SOURCE)

3-018-797-11 BUTTON (L) (3) (+

)

= 0 –. r. OFF. SEL. ATT)

* 116

* 117

118

3-018-612-01 PLATE, LIGHT GUIDE

3-018-611-01 HOLDER (LCD)

3-010-519-01 PANEL, FRONT BACK

LCD901 1-801-968-11 DISPLAY PANEL, LIQUID CRYSTAL

– 44 –

(4) MECHANISM DECK SECTION

(MG-25G-136)

160

159

163

158

154

155

#6

157

156

A

A

161

162

HP901

M901

164

153

152

168

165

168

#7

166

167

151

Ref. No.

Part No.

151

* 152

* 153

154

155

Description

A-3291-667-A CLUTCH (FR) ASSY

3-019-130-01 LEVER (LDG-A)

3-019-131-01 LEVER (LDG-B)

3-020-539-01 SPRING (LD-1), TENSION

3-020-540-01 SPRING (LD-2), TENSION

156

157

158

* 159

160

3-020-542-01 GEAR (LOADING FT)

3-341-753-11 WASHER, POLYETHYLENE

3-020-533-01 HOUSING

3-020-532-01 ARM (SUCTION)

3-020-534-01 HANGER

Remark Ref. No.

Part No.

161

162

163

164

165

Description

3-933-346-01 CATCHER

3-933-344-01 GUIDE (C)

3-014-798-01 SCREW (HEAD), SPECIAL

3-364-151-01 WASHER

A-3301-267-A CHASSIS ASSY (G)

166

167

3-017-302-01 BELT (25)

3-936-853-01 FLYWHEEL (F)

168 3-701-437-21 WASHER

HP901 1-500-196-21 HEAD, MAGNETIC (PLAYBACK)

M901 A-3291-665-A MOTOR ASSY, MAIN (CAPSTAN/REEL)

Remark

– 45 –

KEY

NOTE:

• Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set.

• -XX and -X mean standardized parts, so they may have some difference from the original one.

• RESISTORS

All resistors are in ohms.

METAL: Metal-film resistor.

METAL OXIDE: Metal oxide-film resistor.

F: nonflammable

SECTION 8

ELECTRICAL PARTS LIST

• Items marked “*” are not stocked since they are seldom required for routine service.

Some delay should be anticipated when ordering these items.

• SEMICONDUCTORS

In each case, u: µ, for example: uA. .

: µA. .

uPA. . : µPA. .

uPB. .

: µPB. .

uPC. . : µPC. .

uPD. .

: µPD. .

• CAPACITORS uF: µF

• COILS uH: µH

When indicating parts by reference number, please include the board.

*

*

*

*

*

*

*

Ref. No.

Part No.

Description

KEY BOARD

**********

3-010-375-01 SHEET (REFLECTOR)

3-018-385-01 PLATE (LCD), LIGHT GUIDE

3-018-386-01 HOLDER (LCD)

3-018-611-01 HOLDER (LCD)

3-018-612-01 PLATE, LIGHT GUIDE

C901 1-163-033-00 CERAMIC CHIP 0.022uF

C902 1-165-319-11 CERAMIC CHIP 0.1uF

C903 1-165-319-11 CERAMIC CHIP 0.1uF

C904 1-163-251-11 CERAMIC CHIP 100PF

CN901

< CONNECTOR >

1-764-423-11 PIN, CONNECTOR 12P

< DIODE >

D901 8-719-420-90 DIODE MA8051-M

D902 8-719-422-64 DIODE MA8062-M

D903 8-719-422-64 DIODE MA8062-M

D904 8-719-422-64 DIODE MA8062-M

D905 8-719-422-64 DIODE MA8062-M

IC901

JC901

3-019-149-01 PLATE, LCD

3-019-150-01 SHEET (REFLECTOR)

< CAPACITOR >

< IC >

8-759-365-90 IC LC75824W

< SHORT CHIP >

1-216-295-00 SHORT (CHIP) 0

5%

Remark

50V

50V

50V

50V

< LIQUID CRYSTAL DISPLAY >

LCD901 1-801-968-11 DISPLAY PANEL, LIQUID CRYSTAL

< SWITCH >

LSW901 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (OFF)

(AMBER)

LSW901 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (OFF)

(GREEN)

Ref. No.

Part No.

Description Remark

LSW902 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (SOURCE)

(AMBER)

LSW902 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (SOURCE)

(GREEN)

LSW903 1-762-617-11 SWITCH, KEY BOARD (WITH LED)

(MODE *) (AMBER)

LSW903 1-762-619-11 SWITCH, KEY BOARD (WITH LED)

(MODE *) (GREEN)

LSW904 1-762-617-11 SWITCH, KEY BOARD (WITH LED)

(SEEK AMS, + + )) (AMBER)

LSW904 1-762-619-11 SWITCH, KEY BOARD (WITH LED)

(SEEK AMS, + + )) (GREEN)

LSW905 1-762-617-11 SWITCH, KEY BOARD (WITH LED)

(SEEK AMS, = 0

−

) (AMBER)

LSW905 1-762-619-11 SWITCH, KEY BOARD (WITH LED)

(SEEK AMS, = 0

−

) (GREEN)

LSW906 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (

−

)

LSW906 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (

−

)

(AMBER)

(GREEN)

LSW907 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (SEL)

(AMBER)

LSW907 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (SEL)

(GREEN)

LSW908 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (+)

(AMBER)

LSW908 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (+)

(GREEN)

LSW909 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (ATT)

(5790R: AMBER)

LSW909 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (ATT)

(5790R: GREEN)

LSW910 1-762-617-11 SWITCH, KEY BOARD (WITH LED)

(BTM, SENS) (5790R: AMBER)

LSW910 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (ATT)

(5800R: AMBER)

LSW910 1-762-619-11 SWITCH, KEY BOARD (WITH LED)

(BTM, SENS) (5790R: GREEN)

LSW910 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (ATT)

(5800R: GREEN)

LSW921 1-762-617-11 SWITCH, KEY BOARD (WITH LED) ( 6)

(AMBER)

LSW921 1-762-619-11 SWITCH, KEY BOARD (WITH LED) ( 6)

(GREEN)

LSW922 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (INTRO, 1)

(AMBER)

– 46 –

Ref. No.

Part No.

Description Remark

LSW922 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (INTRO, 1)

(GREEN)

LSW923 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (REPEAT, 2)

(AMBER)

LSW923 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (REPEAT, 2)

(GREEN)

LSW924 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (3)

(AMBER)

LSW924 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (3)

(GREEN)

Ref. No.

Part No.

Description

R903 1-216-045-00 METAL CHIP

R904 1-216-049-11 RES, CHIP

R905 1-216-053-00 METAL CHIP

R906

R907

R908

R909

R910

1-216-053-00 METAL CHIP

1-216-057-00 METAL CHIP

1-216-061-00 METAL CHIP

1-216-065-00 METAL CHIP

1-216-069-00 METAL CHIP

LSW925 1-762-617-11 SWITCH, KEY BOARD (WITH LED)

(BL SKIP, 6) (AMBER)

LSW925 1-762-619-11 SWITCH, KEY BOARD (WITH LED)

(BL SKIP, 6) (GREEN)

LSW926 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (ATA, 5)

LSW926 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (ATA, 5)

LSW927 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (4)

(AMBER)

(GREEN)

(5790R: AMBER)

LSW927 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (MTL, 4)

(5800R: AMBER)

LSW927 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (4)

(5790R: GREEN)

LSW927 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (MTL, 4)

(5800R: GREEN)

LSW928 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (PTY)

(AMBER)

LSW928 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (PTY)

(GREEN)

R921 1-216-045-00 METAL CHIP

R922 1-216-045-00 METAL CHIP

R923 1-216-045-00 METAL CHIP

R924 1-216-049-11 RES, CHIP

R925 1-216-053-00 METAL CHIP

R926 1-216-053-00 METAL CHIP

R927 1-216-057-00 METAL CHIP

R928 1-216-061-00 METAL CHIP

R929 1-216-065-00 METAL CHIP

R930 1-216-069-00 METAL CHIP

R931

R932

R951

R952

R953

1-216-073-00 METAL CHIP

1-216-077-00 METAL CHIP

1-216-041-00 METAL CHIP

1-216-109-00 METAL CHIP

1-216-049-11 RES, CHIP

R954 1-216-049-11 RES, CHIP

R955 1-216-049-11 RES, CHIP

R956 1-216-049-11 RES, CHIP

R961 1-216-025-00 RES, CHIP

R961 1-216-029-00 METAL CHIP

LSW929 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (AF/TA)

(AMBER)

LSW929 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (AF/TA)

(GREEN)

LSW930 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (PRST, +)

(5790R: AMBER)

LSW930 1-762-617-11 SWITCH, KEY BOARD (WITH LED)

(BTM, SENS) (5800R: AMBER)

LSW930 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (PRST, +)

(5790R: GREEN)

LSW930 1-762-619-11 SWITCH, KEY BOARD (WITH LED)

(BTM, SENS) (5800R: GREEN)

LSW931 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (

−

, PRST)

(5790R: AMBER)

LSW931 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (DSPL)

(5800R: AMBER)

LSW931 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (

−

, PRST)

(5790R: GREEN)

LSW931 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (DSPL)

(5800R: GREEN)

LSW932 1-762-617-11 SWITCH, KEY BOARD (WITH LED) (DSPL)

(5790R: AMBER)

LSW932 1-762-619-11 SWITCH, KEY BOARD (WITH LED) (DSPL)

(5790R: GREEN)

R961

R961

R963

R963

R963

R963

R965

R965

R967

R967

1-216-033-00 METAL CHIP

1-216-037-00 METAL CHIP

1-216-025-00 RES, CHIP

1-216-029-00 METAL CHIP

1-216-033-00 METAL CHIP

1-216-037-00 METAL CHIP

1-216-033-00 METAL CHIP

1-216-037-00 METAL CHIP

1-216-021-00 METAL CHIP

1-216-029-00 METAL CHIP

< PILOT LAMP >

PL903 1-517-633-21 LAMP, PILOT (LCD BACK LIGHT)

PL904 1-517-633-21 LAMP, PILOT (LCD BACK LIGHT)

R901

R902

< RESISTOR >

1-216-045-00 METAL CHIP

1-216-045-00 METAL CHIP

680

680

5%

5%

1/10W

1/10W

R969 1-216-021-00 METAL CHIP

R969 1-216-025-00 RES, CHIP

R969 1-216-029-00 METAL CHIP

R971 1-216-021-00 METAL CHIP

R971 1-216-029-00 METAL CHIP

KEY

680

1K (2012)

1.5K

1.5K

2.2K

3.3K

4.7K

6.8K

5%

5%

5%

5%

5%

5%

5%

680

680

680

1K (2012)

1.5K

1.5K

2.2K

3.3K

4.7K

6.8K

5%

5%

5%

5%

5%

5%

5%

5%

5%

10K

15K

470

330K

1K (2012)

5%

5%

5%

5%

1K (2012)

1K (2012)

1K (2012)

100 (2012)

150

(5790R: GREEN)

5% 1/10W

(5790R: AMBER)

220

330

100 (2012)

5% 1/10W

(5800R: GREEN)

5% 1/10W

(5800R: AMBER)

150

220

(5800R: GREEN)

5% 1/10W

(5800R: AMBER)

5% 1/10W

(5790R: GREEN)

330

220

330

68

150

5% 1/10W

(5790R: AMBER)

5% 1/10W

(GREEN)

5%

5%

1/10W

(AMBER)

1/10W

(GREEN)

5% 1/10W

(AMBER)

68

100 (2012)

5% 1/10W

(5790R: GREEN)

150

68

150

(5800R: GREEN)

5% 1/10W

5%

(AMBER)

1/10W

5%

(GREEN)

1/10W

(AMBER)

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

Remark

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

(5790R)

– 47 –

KEY MAIN

*

*

*

*

*

*

*

C24

C25

C26

C28

C29

C30

C31

C32

C34

C19

C20

C21

C22

C23

C14

C15

C16

C17

C18

C6

C9

C11

C12

C13

C1

C2

C3

C4

C5

Ref. No.

R974

R974

R981

Part No.

Description

R973 1-216-025-00 RES, CHIP

R973 1-216-029-00 METAL CHIP

1-216-025-00 RES, CHIP

1-216-029-00 METAL CHIP

1-216-053-00 METAL CHIP

R982 1-216-061-00 METAL CHIP

R983 1-216-069-00 METAL CHIP

3.3K

6.8K

R984 1-216-081-00 METAL CHIP 22K

R999 1-216-295-11 SHORT (CHIP) 0

R999 1-216-308-00 METAL CHIP 4.7

< SWITCH >

100 (2012) (5800R: GREEN)

150 5% 1/10W

(5800R: AMBER)

100 (2012) (5800R: GREEN)

150

1.5K

5%

(5800R: AMBER)

5%

Remark

Ref. No.

Part No.

1/10W

1/10W

C35

C36

C111

Description

1-164-232-11 CERAMIC CHIP 0.01uF

1-163-251-11 CERAMIC CHIP 100PF

Remark

50V

C101 1-163-037-11 CERAMIC CHIP 0.022uF

10% 25V

C102 1-126-160-11 ELECT

C103 1-126-160-11 ELECT

1-126-160-11 ELECT

1uF

1uF

1uF

5%

20%

20%

20%

50V

50V

50V

50V

SW951 1-762-937-11 SWITCH, ROTARY (D-BASS)

5%

5%

1/10W

1/10W

5%

(AMBER)

1/10W

5% 1/10W

(GREEN)

************************************************************

C112

C113

1-164-182-11 CERAMIC CHIP

1-126-160-11 ELECT

0.0033uF 10%

1uF

50V

C114 1-163-037-11 CERAMIC CHIP 0.022uF

10% 25V

C115 1-164-492-11 CERAMIC CHIP 0.15uF

C116 1-164-492-11 CERAMIC CHIP 0.15uF

C118 1-126-157-11 ELECT

C119 1-126-157-11 ELECT

C120 1-126-157-11 ELECT

C121 1-126-157-11 ELECT

10uF

10uF

10uF

10uF

C151 1-107-823-11 CERAMIC CHIP 0.47uF

20%

10%

10%

20%

20%

20%

20%

10%

50V

16V

16V

16V

16V

16V

16V

16V

A-3313-356-A MAIN BOARD, COMPLETE (5790R: AEP, UK)

A-3313-357-A MAIN BOARD, COMPLETE (5790R: German)

A-3313-363-A MAIN BOARD, COMPLETE

1-163-009-11 CERAMIC CHIP 0.001uF

10% 50V

1-164-232-11 CERAMIC CHIP 0.01uF

50V

1-163-009-11 CERAMIC CHIP 0.001uF

10% 50V

1-163-251-11 CERAMIC CHIP 100PF 5% 50V

1-107-823-11 CERAMIC CHIP 0.47uF

10% 16V

1-163-037-11 CERAMIC CHIP 0.022uF

10% 25V

1-164-161-11 CERAMIC CHIP 0.0022uF 10% 100V

1-124-584-00 ELECT 100uF 20% 10V

1-163-809-11 CERAMIC CHIP 0.047uF

10% 25V

1-124-463-00 ELECT 0.1uF

20% 50V

1-164-232-11 CERAMIC CHIP 0.01uF

50V

1-163-251-11 CERAMIC CHIP 100PF

1-163-251-11 CERAMIC CHIP 100PF

1-163-251-11 CERAMIC CHIP 100PF

1-163-077-00 CERAMIC CHIP 0.1uF

1-126-933-11 ELECT 100uF

5%

5%

5%

10%

20%

50V

50V

50V

25V

16V

1-126-157-11 ELECT

1-126-160-11 ELECT

(5800R: AEP, UK, South European)

A-3313-364-A MAIN BOARD, COMPLETE (5800R: German)

*********************

(Including POWER BOARD, COMPLETE)

3-009-307-01 BRACKET (IC)

3-010-471-01 HEAT SINK

3-012-105-01 BRACKET (HS)

7-685-793-09 SCREW +PTT 2.6X8 (S)

< CAPACITOR >

1-163-235-11 CERAMIC CHIP 22PF

1-126-157-11 ELECT

1-126-157-11 ELECT

1-126-157-11 ELECT

1-163-099-00 CERAMIC CHIP

1-163-099-00 CERAMIC CHIP

1-163-133-00 CERAMIC CHIP

1-164-232-11 CERAMIC CHIP

10uF

10uF

10uF

18PF

18PF

470PF

10uF

0.01uF

1-163-231-11 CERAMIC CHIP 15PF

1-163-229-11 CERAMIC CHIP 12PF

1uF

1-163-251-11 CERAMIC CHIP 100PF

5%

20%

20%

20%

5%

5%

5%

20%

5%

5%

50V

16V

16V

16V

50V

50V

50V

16V

50V

50V

50V

20% 50V

5% 50V

C152 1-163-809-11 CERAMIC CHIP 0.047uF

10% 25V

C153 1-163-037-11 CERAMIC CHIP 0.022uF

10% 25V

C155 1-124-234-00 ELECT

C157 1-124-584-00 ELECT

C158 1-163-031-11 CERAMIC CHIP 0.01uF

C201 1-163-037-11 CERAMIC CHIP 0.022uF

10% 25V

C202 1-126-160-11 ELECT 1uF 20% 50V

C203 1-126-160-11 ELECT

C211 1-126-160-11 ELECT

22uF

100uF

1uF

1uF

C212 1-164-182-11 CERAMIC CHIP 0.0033uF 10% 50V

C213 1-126-160-11 ELECT 1uF 20% 50V

C214 1-163-037-11 CERAMIC CHIP 0.022uF

10% 25V

C215 1-164-492-11 CERAMIC CHIP 0.15uF

C216 1-164-492-11 CERAMIC CHIP 0.15uF

C218 1-126-157-11 ELECT 10uF

10%

10%

20%

16V

16V

16V

C219 1-126-157-11 ELECT

C220 1-126-157-11 ELECT

10uF

10uF

20% 16V

20% 16V

C221 1-126-157-11 ELECT 10uF 20% 16V

C301 1-163-009-11 CERAMIC CHIP 0.001uF

10% 50V

C302 1-163-263-11 CERAMIC CHIP 330PF 5% 50V

C303 1-163-263-11 CERAMIC CHIP 330PF

C304 1-164-232-11 CERAMIC CHIP 0.01uF

C305 1-164-489-11 CERAMIC CHIP 0.22uF

C308 1-126-160-11 ELECT 1uF

C351 1-163-251-11 CERAMIC CHIP 100PF

C353 1-124-465-00 ELECT 0.47uF

C354 1-164-232-11 CERAMIC CHIP 0.01uF

20%

20%

20%

20%

5%

10%

20%

5%

20%

16V

10V

50V

50V

50V

50V

50V

16V

50V

C309 1-163-009-11 CERAMIC CHIP 0.001uF

10% 50V

C310 1-164-161-11 CERAMIC CHIP 0.0022uF 10% 100V

C350 1-124-234-00 ELECT 22uF 20% 16V

50V

50V

50V

C356 1-164-004-11 CERAMIC CHIP 0.1uF

C357 1-124-584-00 ELECT 100uF

C362 1-165-319-11 CERAMIC CHIP 0.1uF

C363 1-165-319-11 CERAMIC CHIP 0.1uF

C365 1-126-157-11 ELECT 10uF

10% 25V

20% 10V

50V

50V

20% 16V

C366 1-126-157-11 ELECT

C367 1-126-934-11 ELECT

10uF

220uF

20% 16V

20% 16V

C401 1-163-009-11 CERAMIC CHIP 0.001uF

10% 50V

C402 1-163-263-11 CERAMIC CHIP 330PF 5% 50V

C403 1-163-263-11 CERAMIC CHIP 330PF 5% 50V

C404 1-164-232-11 CERAMIC CHIP 0.01uF

50V

– 48 –

Ref. No.

Part No.

Description Remark

C405 1-164-489-11 CERAMIC CHIP 0.22uF

10% 16V

C408 1-126-160-11 ELECT 1uF 20% 50V

C409 1-163-009-11 CERAMIC CHIP 0.001uF

10% 50V

C410 1-164-161-11 CERAMIC CHIP 0.0022uF 10% 100V

C501 1-124-584-00 ELECT 100uF

C502 1-109-982-11 CERAMIC CHIP 1uF

C503 1-163-099-00 CERAMIC CHIP 18PF

C504 1-163-235-11 CERAMIC CHIP 22PF

C505 1-165-319-11 CERAMIC CHIP 0.1uF

C506 1-164-232-11 CERAMIC CHIP 0.01uF

C507 1-164-004-11 CERAMIC CHIP 0.1uF

C582 1-124-257-00 ELECT

C583 1-124-589-11 ELECT

C609

C610

C612

C614

C617

1-124-589-11 ELECT

1-124-234-00 ELECT

1-109-982-11 CERAMIC CHIP

1-163-251-11 CERAMIC CHIP

1-126-157-11 ELECT

2.2uF

47uF

C584 1-163-243-11 CERAMIC CHIP 47PF

C601 1-164-222-11 CERAMIC CHIP 0.22uF

C603 1-125-710-11 DOUBLE LAYER 0.1F

C605 1-126-157-11 ELECT

C606 1-126-157-11 ELECT

C607 1-126-157-11 ELECT

10uF

10uF

10uF

47uF

22uF

1uF

100PF

10uF

20% 10V

10% 10V

5%

5%

50V

50V

50V

50V

10% 25V

20% 50V

20% 16V

5% 50V

20%

20%

20%

25V

5.5V

16V

16V

16V

20% 16V

20% 16V

10% 10V

5% 50V

20% 16V

C618 1-164-232-11 CERAMIC CHIP 0.01uF

C650 1-126-936-11 ELECT 3300uF 20%

50V

16V

C660 1-164-004-11 CERAMIC CHIP 0.1uF

10% 25V

(5800R)

C701 1-163-009-11 CERAMIC CHIP 0.001uF

10% 50V

Ref. No.

Part No.

Description

D613 8-719-034-94 DIODE MA4180-M(QZ)

D614 8-719-109-97 DIODE RD6.8ES-B2

D615 8-719-109-97 DIODE RD6.8ES-B2

D616 8-719-422-64 DIODE MA8062-M

D617 8-719-422-64 DIODE MA8062-M

D621 8-719-970-02 DIODE 1SR139-400

D623 8-719-970-02 DIODE 1SR139-400

D624 8-719-404-49 DIODE MA111

D652 8-719-018-04 DIODE MA8240-TX

D653 8-719-422-76 DIODE MA8075-M

D660 8-719-422-64 DIODE MA8062-M (5800R)

D661 8-719-404-49 DIODE MA111 (5800R)

D662 8-719-422-64 DIODE MA8062-M (5800R)

D701 8-719-057-80 DIODE MA8160-M-TX

D702 8-719-422-80 DIODE MA8075-H-TX

IC1

IC3

IC151

IC351

IC360

J1

J501

< IC >

8-759-448-88 IC TB2114F(EL)

8-759-163-63 IC TDA7330BD-013TR

8-759-443-67 IC LC75373ED

8-752-079-78 IC CXA2509AQ-T4

8-759-395-97 IC MM1322XFBE

IC501 8-759-492-40 IC MN1884820SC

IC571 8-759-940-45 IC S-8054HN-CB

IC601 8-759-347-49 IC BA3918-V2

< JACK >

1-764-808-14 JACK (ANT) (FM/AM ANTENNA)

1-566-822-41 JACK (REMOTE IN)

< SHORT CHIP >

< CONNECTOR >

CN351 1-766-260-11 CONNECTOR, FFC/FPC (ZIF) 7P

* CN352 1-506-995-11 PIN, CONNECTOR (PC BOARD) 13P

CN602 1-764-422-11 PLUG, CONNECTOR 12P

< DISCHARGE GAP >

1-517-422-11 GAP, SPARK

* CP1

< DIODE >

D2

D3

8-719-991-65 DIODE SB02W03C

8-719-423-07 DIODE MA8100-L-TX

D4 8-719-422-64 DIODE MA8062-M

D350 8-719-404-49 DIODE MA111

D361 8-719-423-07 DIODE MA8100-L-TX

JC5

JC7

JC8

JC9

JC10

JC11

JC14

JC15

JC16

JC17

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

D362

D501

D504

D506

D583

8-719-911-19 DIODE 1SS119

8-719-422-12 DIODE MA8039

8-719-400-20 DIODE MA152WA

8-719-911-19 DIODE 1SS119

8-719-404-49 DIODE MA111

D584 8-719-422-12 DIODE MA8039

D601 8-719-423-32 DIODE MA8120-M

D605 8-719-977-03 DIODE DTZ5.6B

D606 8-719-017-67 DIODE MA8068H

D607 8-719-801-78 DIODE 1SS184

D609 8-719-422-64 DIODE MA8062-M

D610 8-719-422-64 DIODE MA8062-M

D611 8-719-109-97 DIODE RD6.8ES-B2

D612 8-719-109-97 DIODE RD6.8ES-B2

JC18

JC20

JC21

JC22

JC23

JC24

JC27

JC28

JC29

JC29

JC30

JC31

JC32

JC36

JC37

JC38

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

1-216-295-11 SHORT (CHIP) 0

MAIN

Remark

– 49 –

MAIN

JC66

JC67

JC68

JC70

JC71

JC72

JC73

JC74

JC75

JC76

JC77

JC78

JC80

JC81

Ref. No.

Part No.

JC40

JC50

JC51

JC52

Description

1-216-295-11 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

JC53

JC54

JC55

JC56

JC58

JC59

JC60

JC62

JC63

JC65

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0 (5790R)

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0 (5800R)

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

1-216-296-00 SHORT (CHIP) 0

< COIL >

L1

L2

L4

L501

1-412-006-31 INDUCTOR CHIP 10uH

1-410-509-11 INDUCTOR 10uH

1-410-509-11 INDUCTOR

1-410-509-11 INDUCTOR

10uH

10uH

< TRANSISTOR >

Q2

Q3

8-729-120-28 TRANSISTOR 2SC1623-L5L6

8-729-907-28 TRANSISTOR IMD3

Q101 8-729-920-21 TRANSISTOR DTC314TKH04

Q102 8-729-920-21 TRANSISTOR DTC314TKH04

Q103 8-729-920-21 TRANSISTOR DTC314TKH04

Q201 8-729-920-21 TRANSISTOR DTC314TKH04

Q202 8-729-920-21 TRANSISTOR DTC314TKH04

Q203 8-729-920-21 TRANSISTOR DTC314TKH04

Q361 8-729-015-11 TRANSISTOR 2SD1802FAST-TL

Q362 8-729-020-67 TRANSISTOR XN1A312-TX

Q364 8-729-106-60 TRANSISTOR 2SB1115A

Q365 8-729-900-53 TRANSISTOR DTC114EK

Q501 8-729-020-67 TRANSISTOR XN1A312-TX

Q503 8-729-120-28 TRANSISTOR 2SC1623-L5L6

Q581 8-729-020-67 TRANSISTOR XN1A312-TX

Q603 8-729-423-99 TRANSISTOR 2SD2137-OP

Q605 8-729-020-67 TRANSISTOR XN1A312-TX

Q606 8-729-027-23 TRANSISTOR DTA114EKA-T146

Q608 8-729-027-23 TRANSISTOR DTA114EKA-T146

Q609 8-729-015-11 TRANSISTOR 2SD1802FAST-TL

Q610 8-729-120-28 TRANSISTOR 2SC1623-L5L6

Q701 8-729-900-53 TRANSISTOR DTC114EK

Remark

Ref. No.

Part No.

Description

Q702 8-729-020-67 TRANSISTOR XN1A312-TX

R6

R7

R8

R9

R11

R1

R2

R3

R4

R5

< RESISTOR >

1-216-049-11 RES, CHIP

1-216-065-00 METAL CHIP

1-216-073-00 METAL CHIP

1-216-097-00 RES, CHIP

1-216-017-00 RES, CHIP

R14

R15

R16

R17

R18

1-216-077-00 METAL CHIP

1-216-075-00 METAL CHIP

1-216-025-00 RES, CHIP

1-216-057-00 METAL CHIP

1-216-049-11 RES, CHIP

1-216-057-00 METAL CHIP

1-216-073-00 METAL CHIP

1-216-071-00 METAL CHIP

1-216-129-00 METAL CHIP

1-216-049-11 RES, CHIP

R19 1-216-073-00 METAL CHIP

R101 1-216-065-00 METAL CHIP

R102 1-216-085-00 METAL CHIP

R103 1-216-061-00 METAL CHIP

R104 1-216-190-00 RES, CHIP

R105

R108

R109

R110

R111

1-216-190-00 RES, CHIP

1-216-077-00 METAL CHIP

1-216-077-00 METAL CHIP

1-216-077-00 METAL CHIP

1-216-077-00 METAL CHIP

R112 1-216-129-00 METAL CHIP

R113 1-216-129-00 METAL CHIP

R151 1-216-065-00 METAL CHIP

R201 1-216-214-00 RES, CHIP

R202 1-216-085-00 METAL CHIP

R203

R204

R205

R208

R209

1-216-061-00 METAL CHIP

1-216-041-00 METAL CHIP

1-216-041-00 METAL CHIP

1-216-077-00 METAL CHIP

1-216-077-00 METAL CHIP

R210 1-216-077-00 METAL CHIP

R211 1-216-077-00 METAL CHIP

R212 1-216-129-00 METAL CHIP

R213 1-216-129-00 METAL CHIP

R303 1-216-077-00 METAL CHIP

R304 1-216-081-00 METAL CHIP

10K

4.7K

33K

3.3K

470 (3216)

470 (3216)

15K 5%

15K

15K

15K

5%

5%

5%

2.2M

2.2M

4.7K

4.7K (3216)

33K

3.3K

470

470

15K

15K

15K

15K

2.2M

2.2M

15K

22K

5%

5%

5%

5%

5%

5%

5%

5%

5%

5%

5%

5%

5%

1K (2012)

4.7K

10K

100K (2012)

5%

5%

47 (2012)

15K

12K

100 (2012)

2.2K

5%

1K (2012)

5%

5%

2.2K

10K

8.2K

2.2M

1K (2012)

5%

5%

5%

5%

5%

5%

5%

5%

5%

5%

R305 1-216-109-00 METAL CHIP

R306 1-216-190-00 RES, CHIP

R307 1-216-057-00 METAL CHIP

R308 1-216-073-00 METAL CHIP

R351 1-208-812-11 RES, CHIP

R352 1-216-105-00 RES, CHIP

R353 1-216-065-00 METAL CHIP

R354 1-216-077-00 METAL CHIP

R355 1-216-009-00 METAL CHIP

R361 1-216-049-11 RES, CHIP

R362 1-249-389-11 CARBON

R363 1-249-389-11 CARBON

R364 1-216-073-00 METAL CHIP

330K

470 (3216)

2.2K

10K

1K (2012)

4.7

4.7

10K

5%

5%

5%

18K

220K (2012)

4.7K

15K

22

5%

5%

5%

5%

5%

5%

Remark

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

(5800R)

1/10W

1/10W

1/10W

1/10W

1/10W

1/10W

1/4W

1/4W

1/10W

– 50 –

Ref. No.

Part No.

Description

R365 1-216-065-00 METAL CHIP

R403 1-216-077-00 METAL CHIP

R404 1-216-081-00 METAL CHIP

R405 1-216-109-00 METAL CHIP

R406 1-216-190-00 RES, CHIP

R407 1-216-057-00 METAL CHIP

R408 1-216-073-00 METAL CHIP

R501 1-216-097-00 RES, CHIP

R505 1-216-049-11 RES, CHIP

R506 1-216-109-00 METAL CHIP

R507 1-216-198-00 RES, CHIP

R508 1-216-206-00 RES, CHIP

R509 1-216-198-00 RES, CHIP

R510 1-216-097-00 RES, CHIP

R511 1-216-097-00 RES, CHIP

R512 1-216-097-00 RES, CHIP

R513 1-216-097-00 RES, CHIP

R514 1-216-198-00 RES, CHIP

R515 1-216-198-00 RES, CHIP

R516 1-216-198-00 RES, CHIP

R517 1-216-198-00 RES, CHIP

R518 1-216-246-00 RES, CHIP

R521 1-216-246-00 RES, CHIP

R522 1-216-097-00 RES, CHIP

R523 1-216-097-00 RES, CHIP

R524 1-216-097-00 RES, CHIP

R525 1-216-097-00 RES, CHIP

R526 1-216-097-00 RES, CHIP

R528 1-216-097-00 RES, CHIP

R531 1-216-246-00 RES, CHIP

R533 1-216-246-00 RES, CHIP

R534 1-216-246-00 RES, CHIP

R535 1-208-814-11 RES, CHIP

R536 1-216-246-00 RES, CHIP

R537 1-216-097-00 RES, CHIP

R538 1-216-246-00 RES, CHIP

R539 1-208-806-11 RES,

R540 1-216-097-00 RES, CHIP

R544 1-216-049-11 RES, CHIP

R545 1-216-097-00 RES, CHIP

R546 1-216-097-00 RES, CHIP

R548 1-216-222-00 RES, CHIP

R549 1-216-222-00 RES, CHIP

R551 1-249-429-11 CARBON

R550 1-216-073-00 METAL CHIP

R562 1-216-097-00 RES, CHIP

R570 1-216-097-00 RES, CHIP

R571 1-216-097-00 RES, CHIP

R572 1-216-246-00 RES, CHIP

R573 1-216-097-00 RES, CHIP

R574 1-216-097-00 RES, CHIP

R582 1-216-198-00 RES, CHIP

R583 1-216-166-00 RES, CHIP

R584 1-216-238-00 RES, CHIP

R585 1-216-097-00 RES, CHIP

MAIN POWER

4.7K

15K

22K

2.2K

10K 5%

100K (2012)

1K (2012)

330K

1K (3216)

5%

5%

5%

330K

470 (3216)

5%

5%

5%

2.2K (3216)

1K (3216)

100K (2012)

100K (2012)

100K (2012)

100K (2012)

1K (3216)

1K (3216)

1K (3216)

1K (3216)

100K (3216)

100K (3216)

100K (2012)

100K (2012)

100K (2012)

100K (2012)

100K (2012)

100K (2012)

100K (3216)

100K (3216) (5800R)

100K (3216) (5790R)

22K

100K

100K (2012) (German)

100K (3216)

(AEP, UK, South European)

CHIP 10K

100K (2012)

1K (2012)

100K (2012)

100K (2012)

10K (3216)

10K (3216)

10K

10K

5%

5%

100K (2012)

Remark

1/10W

1/10W

1/10W

(5800R)

1/10W

1/10W

1/10W

1/10W

Ref. No.

Part No.

R601

Description

1-216-057-00 METAL CHIP

R602 1-216-097-00 RES, CHIP

R603 1-216-089-00 RES, CHIP

R604 1-216-089-00 RES, CHIP

R606 1-216-206-00 RES, CHIP

R607 1-216-073-00 METAL CHIP

R608

R609

R610

R612

R613

1-216-097-00 RES, CHIP

1-216-037-00 METAL CHIP

1-216-073-00 METAL CHIP

1-216-025-00 RES, CHIP

1-216-025-00 RES, CHIP

2.2K

100K (2012)

47K (2012)

47K (2012)

2.2K (3216)

10K

5%

5%

100K (2012)

330 5%

10K

100 (2012)

5%

100 (2012)

R614 1-208-806-11 RES, CHIP

R615 1-208-806-11 RES, CHIP

10K

10K

R616 1-216-295-11 SHORT (CHIP) 0

R617 1-216-025-00 RES, CHIP 100 (2012)

R618 1-208-806-11 RES, CHIP 10K

1/4W

1/10W

(5800R)

R619 1-208-806-11 RES, CHIP

R620 1-216-025-00 RES, CHIP

R621 1-216-025-00 RES, CHIP

R624 1-249-383-11 CARBON

R625

R626

R627

R660

R661

R701 1-216-073-00 METAL CHIP

R702 1-216-113-00 METAL CHIP 470K

< VARIABLE RESISTOR >

RV1

S601

TU1

1-249-383-11 CARBON

1-249-383-11 CARBON

1-249-383-11 CARBON

1-216-198-00 RES, CHIP

1-216-129-00 METAL CHIP

1.5

1.5

5%

5%

1/6W

1/6W

1K (3216) (5800R)

2.2M

5% 1/10W

10K 5%

(5800R)

1/10W

1-241-768-11 RES, ADJ, CARBON 220K

< SWITCH >

< TUNER UNIT >

10K

100 (2012)

100 (2012)

1.5

1.5

1-692-431-21 SWITCH, TACTILE (RESET)

5%

5%

5%

1-693-373-11 TUNER UNIT (FM/AM TUNER UNIT)

< VIBRATOR >

Remark

1/10W

1/10W

1/10W

1/10W

1/6W

1/6W

1/10W

************************************************************

*

X1

X2

1-567-848-11 VIBRATOR, CRYSTAL (7.2MHz)

1-579-242-41 VIBRATOR, CRYSTAL (4.332MHz)

X501 1-579-125-11 VIBRATOR, CERAMIC (8MHz)

X502 1-567-098-41 VIBRATOR, CRYSTAL (32.768kHz)

A-3309-740-A POWER BOARD, COMPLETE

***********************

(Included in MAIN BOARD, COMPLETE)

100K (2012)

100K (2012)

100K (3216)

100K (2012)

100K (2012)

1K (3216)

47 (3216)

47K (3216)

100K (2012)

< CAPACITOR >

C801 1-126-157-11 ELECT

C802 1-126-157-11 ELECT

C803 1-126-157-11 ELECT

C804 1-124-589-11 ELECT

C805 1-136-165-00 FILM

10uF

10uF

10uF

47uF

0.1uF

20%

20%

20%

20%

5%

16V

16V

16V

16V

50V

C806 1-164-506-11 CERAMIC CHIP 4.7uF

16V

C811 1-163-009-11 CERAMIC CHIP 0.001uF

10% 50V

– 51 –

POWER

Ref. No.

Part No.

Description

< CONNECTOR >

CN801 1-778-985-11 PIN, CONNECTOR (ISO)

CN802 1-778-983-11 PIN, CONNECTOR (PC BOARD) 13P

CN803 1-778-983-11 PIN, CONNECTOR (PC BOARD) 13P

< DIODE >

Remark

Ref. No.

Part No.

C812 1-163-009-11 CERAMIC CHIP 0.001uF

10% 50V

C821 1-163-009-11 CERAMIC CHIP 0.001uF

10% 50V

C822 1-163-009-11 CERAMIC CHIP 0.001uF

10% 50V

#1

#2

#3

#5

#6

Description

**************

HARDWARE LIST

**************

7-621-772-10 SCREW +B 2X4

7-685-793-09 SCREW +PTT 2.6X8 (S)

7-685-792-09 SCREW +PTT 2.6X6 (S)

7-685-106-19 SCREW +P 2X10 TYPE2 NON-SLIT

7-624-104-04 STOP RING 2.0, TYPE-E

D801

D813

D814

D815

D816 8-719-970-02 DIODE 1SR139-400

D823 8-719-970-02 DIODE 1SR139-400

D824 8-719-970-02 DIODE 1SR139-400

D825 8-719-970-02 DIODE 1SR139-400

D826 8-719-970-02 DIODE 1SR139-400

IC801

8-719-049-38 DIODE 1N5404TU

8-719-970-02 DIODE 1SR139-400

8-719-970-02 DIODE 1SR139-400

8-719-970-02 DIODE 1SR139-400

< IC >

8-759-490-48 IC HA13158

#7 7-627-553-17 PRECISION SCREW +P 2X2 TYPE 3

************************************************************

ACCESSORIES & PACKING MATERIALS

********************************

1-473-067-71 REMOTE COMMANDER (RM-X4S)

Remark

(5800R: AEP, UK, South European)

3-861-508-11 MANUAL, INSTRUCTION (ENGLISH, SPANISH,

SWEDISH, PORTUGUESE) (5800R: AEP, UK)

3-861-508-21 MANUAL, INSTRUCTION (FRENCH, GERMAN,

DUTCH, ITALIAN) (5800R: AEP)

3-861-508-31 MANUAL, INSTRUCTION

(CZECH, GREEK, POLISH, TURKISH, ENGLISH)

(5800R: South European)

3-861-508-41 MANUAL, INSTRUCTION (GERMAN)

(5800R: German) < SHORT CHIP >

JC801 1-216-296-00 SHORT (CHIP) 0

L801

< COIL >

1-416-046-11 COIL, CHOKE 400uH

< RESISTOR >

R801 1-216-198-00 RES, CHIP

R802 1-216-198-00 RES, CHIP

R803 1-216-049-11 RES, CHIP

R804 1-216-049-11 RES, CHIP

R811 1-216-296-00 SHORT (CHIP) 0

1K (3216)

1K (3216)

1K (2012)

1K (2012)

3-861-509-11 MANUAL, INSTRUCTION, INSTALL

(ENGLISH, SPANISH, SWEDISH, PORTUGUESE)

(5800R: AEP, UK)

3-861-509-21 MANUAL, INSTRUCTION, INSTALL

(FRENCH, GERMAN, DUTCH, ITALIAN)

(5800R: AEP, German)

3-861-509-31 MANUAL, INSTRUCTION, INSTALL

(CZECH, GREEK, POLISH, TURKISH, ENGLISH)

(5800R: South European)

3-861-512-11 MANUAL, INSTRUCTION (ENGLISH, SPANISH,

SWEDISH, PORTUGUESE) (5790R: AEP, UK)

3-861-512-21 MANUAL, INSTRUCTION (FRENCH, GERMAN,

DUTCH, ITALIAN)(5790R: AEP)

R812

R813

R814

R821

R822

S801

9

16

17

1-216-296-00 SHORT (CHIP)

1-216-296-00 SHORT (CHIP)

1-216-296-00 SHORT (CHIP)

1-216-296-00 SHORT (CHIP)

1-216-296-00 SHORT (CHIP) 0

R823 1-216-296-00 SHORT (CHIP) 0

R824 1-216-296-00 SHORT (CHIP) 0

< SWITCH >

0

0

0

0

1-571-478-11 SWITCH, SLIDE (POWER SELECT)

************************************************************

MISCELLANEOUS

***************

1-777-989-31 CORD (WITH CONNECTOR) (ATT) (5800R)

1-782-092-11 CORD (WITH CONNECTOR) (ISO-P) (POWER)

1-782-093-11 CORD (WITH CONNECTOR) (ISO-S)

F801

HP901 1-500-196-21 HEAD, MAGNETIC (PLAYBACK)

(SPEAKER)

1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) (10A)

M901 A-3291-665-A MOTOR ASSY, MAIN (CAPSTAN/REEL)

************************************************************

3-861-512-41 MANUAL, INSTRUCTION (GERMAN)

(5790R: German)

3-861-513-11 MANUAL, INSTRUCTION, INSTALL

(ENGLISH, SPANISH, SWEDISH, PORTUGUESE)

(5790R: AEP, UK)

3-861-513-21 MANUAL, INSTRUCTION, INSTALL

(FRENCH, GERMAN, DUTCH, ITALIAN)

(5790R: AEP, German)

3-861-513-31 MANUAL, INSTRUCTION, INSTALL

(CZECH, GREEK, POLISH, TURKISH, ENGLISH)

(5800R: South European)

3-861-973-11 MANUAL, INSTRUCTION, INSTALL

(for RM-X4S) (ENGLISH, FRENCH, GERMAN,

SPANISH, DUTCH, SWEDISH, ITALIAN,

PORTUGUESE, POLISH, CZECH, GREEK,

TURKISH)) (5800R: AEP, UK, South European)

3-921-278-01 LABEL (DSPL) (for RM-X4S)

(5800R: AEP, UK, South European)

X-3373-412-1 CASE (PANEL) ASSY (for FRONT PANEL)

– 52 –

501

502

503

504

505

506

507

Ref. No.

Part No.

Description Remark

PARTS FOR INSTALLATION AND CONNECTIONS

**************************************

3-916-161-31 FRAME ASSY

X-3370-077-1 SCREW ASSY (AE. KEY), FITTING

1-777-989-31 CORD (WITH CONNECTOR) (ATT) (5800R)

1-782-093-11 CORD (WITH CONNECTOR) (ISO-S)

(SPEAKER)

1-782-092-11 CORD (WITH CONNECTOR) (ISO-P) (POWER)

X-3373-432-1 BRACKET ASSY (for RM-X4S)

(5800R: AEP, UK, South European)

1-465-459-21 ADAPTER, ANTENNA

501 502

503 504 505

506

XR-5800R: AEP, UK, South European

507

– 53 –

XR-5790R/5800R

9-925-675-11

Sony Corporation

Personal & Mobile Communication Company

– 54 –

97L0542-1

Printed in Japan © 1997. 12

Published by Quality Assurance Dept.